KSI SQX Brochure
-
Upload
source-media -
Category
Documents
-
view
224 -
download
0
description
Transcript of KSI SQX Brochure
SQXOur perfect entry-level model for the highly flexible manufacture of complex parts.
Tough enough to tackle any job.
SQX Specifications
Front End Tool Detail Back End Tool Detail Sub-Spindle DetailToggle System Detail
Tool Layout and Stroke
SQX Specifications
Standard units
Synchronous rotary guide bush holder unit4 live cross tools4 live back end tools3 live front end toolsAir blow on sub-spindleProduct Parts conveyorCentralized lubricating systemSafety door lockAutomatic sources of electricity circuit breakerSelf-examination systemChip box, standard tools and tool boxRigid tapping on all toolsAll Fanuc electronics and motorsFull C-axis main and sub-spindleY-axis tool blockDual pump coolant system
Optional units
Bar feeder5 live cross toolsChip conveyorAir blow by m codeHigh pressure coolant pumpBroaching holders
DescriptionMachineMax. rpmMax. Turning DiameterStrokeAdditional Positive BrakeRapid Traverse Rate
ToolingO.D ToolsFront Work ToolsCross Driven ToolsBack Work ToolsEccentricity Tools
NCSpecificationControllable AxesLCD
MotorMain SpindleSub-SpindleCross DrillBack EndServoCoolant
EtcCoolant Tank Capa.Lubrication Tank Capa.Center HeightWeight
(
Description
Standard Fanuc specificationAll axis rigid tappingHand trace functionDrill cycling functionCutter compensationBacklash, pitch error compensationProgram check by MPGFull C-axis main and sub-spindle2-year Fanuc warrantyOff-center milling all sides
Control specificationSQX 32 SQX 38
toll free 888.344.3330 main 952.564.3290 fax 952.564.3293 [email protected] [email protected] www.ksiswiss.com
SQX-32 | 38 Main 10,000/Sub 8,000rpmØ32mm (1.259")280mm (11.023")1/1,000°32m/min
6EA5EA4EA4EA3EA
Fanuc 18iTB7 Axes10.4" MONO
5.5/7.5kW (7.4/10.1hp)1.5/2.2kW (2.0/3.0hp)0.55/1.1kW (0.7/1.5hp)1.0kW (1.3hp)1.0kW (1.3hp)0.9kW (1.2hp)
200L (52.834 gal)1.8L (0.475 gal)1,000mm (39.259")3,500kg (7,716 lbs)
Specs subject to change without notice.