Kreg Jig K4 Master System - Welcome to Ballew Saw · · 2015-03-23The Ultimate Kreg Jig. Kreg Jig...
Transcript of Kreg Jig K4 Master System - Welcome to Ballew Saw · · 2015-03-23The Ultimate Kreg Jig. Kreg Jig...
Ultimate Technology. Ultimate Features. The Ultimate Kreg Jig.
Kreg Jig K4 Master System Kreg Jig K4 Master System
• Drill guide block is interchangeable between the bench top and portable bases.• Bench top base features patent pending front clamping design.• All the thickness flexibility you need. 1/8” incremental setting for materials from 1/2”
to 1-1/2” thick.• Solid metal drill guide insert assures a clean, accurate pocket hole.• Dust collection shroud means no more wood chips on your workbench and extended
drill bit life.• Premium Face Clamp is the perfect clamp for drilling, assembly, and more.• Jig bodies made of rugged, glass filled nylon composites.
Includes:(1) K3 drill guide block, bench top base,
portable base, premium face clamp, mate-rial support stop, dust collection shroud,
drill bit, depth collar, allen wrench, driverbits, screws and carrying case.
K4MSK4MS $149.00
Specifications:- Drill Guide Lifetime Warranty- 3 Drill Guides- 2 Clamping Methods: Toggle and Face
DemoAvailable
The Kreg Jig K5 incorporates the best features of every Kreg Jig that came before with upgrades you've never seen. That starts with an all-new clamping mechanism that you can adjust without tools or adjusting nuts to match your workpiece thickness. Just slide the clamp into place, "click" the large front-mounted clamp handle, and your jig is set to hold your workpiece tight every time. Plus, you'll find large support wings to hold your workpiece steady - and they have storage compartments inside. Add in a batch of other great features like a standard swiveling dust-collection port, spring-loaded stop for the Drill Guide Block, and, of course, the ability to remove the Guide Block for portable use, and you have, quite simply, the most advanced Kreg Jig yet.
Includes:Kreg Jig K5 Base with Ratcheting Front-Side Clamp, Extension Wings, Swiveling Dust Collection Port, Drill Guide Block, Spacer Block, Workpiece Stop, Drill Bit Setup Block, Hex-Shank Stepped Drill Bit, 6" Driver Bit, Stop Collar, Allen Wrench, User Guide, Starter Screw and Plug Pack.
Body Number of Drill Drill Guide Clamping Method Workpiece ThicknessMaterial Guides Spacings Settings
Specifications:
Glass Filled Nylon 3 9/16", 7/8", 1-7/16"Ratchet Clamp on
Benchtop Base 1/2" , 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4",
1-3/8", 1-1/2"
Kreg Jig K5
$139.00K5
KREG
CALL TOLL FREE TO ORDER 1 (800) 288-7483 45
Ballew Saw & Tool, Inc. 325 South Kimbrough Ave. | Springfield, MO | 65806 1 (800) 288-7483
The Mini Kreg JigThe Mini Kreg Jig
When you need a pocket hole in a tight spot, or require maximum portability, the MiniKreg Jig® is the solution. Features hardened steel drill guide and glass reinforced nylonbody complete with a chip extraction hole. The jig’s body is untapered so it clamps inplace easily. An added feature is the plug setter that is incorporated into the base of thejig. Start the plug into the hole, then place the groove of the Mini Kreg Jig® onto theback of the plug and push into place. A real hand and time saver. The Mini Kreg Jig® isincluded when you purchase the Kreg Jig® K2000 ProPack. Lifetime warranty and 30day satisfaction guarantee or your money back. Shop Tip: For squeaky floors, clampMini to joist, drill upwards, and drive screw to pull flooring down tight.
Also available is the MKJKIT which Includes:Mini Kreg Jig, KJD Drill Bit and KJSC/D Depth Collar
MKJMKJ Mini Kreg Jig® $9.99MKJKITMKJKIT Mini Kreg Jig® Kit $21.99
Minimal.
Specifications:- Drill Guide Lifetime Warranty- Clamping Method: Works with a variety of common clamps or any Kreg Face Clamp
- Screw Centering Ability: 1/2” to Unlimited.
Kreg Pocket Hole Machine SpecificationsKreg Pocket Hole Machine SpecificationsbTYPE FOREMAN DK1100TP DK1100FP DK1100FE DK3100 DK5100
Drill Bits DKDB drill bit: DKDB drill bit DKDB drill bit DKDB drill bit: 2 DKDB drill bits DKDB drill bit3/8" shank dia. 3/8" shank dia. 3/8" shank dia. 3/8" shank dia. 1 LHDKB-left hand 3/8" shank dia.
3/16" pilot, 3/16" pilot, 1/2" long 3/16" pilot, 1/2" long 3/16" pilot, 1/2" long 3/8" shank dia. 1/16" pilot, 1/2" long1/2" long 1/16" pilot, 1/2" long
Motor Pneumatic or Pneumatic, 1-1/4 HP Pneumatic, 1-1/4 HP Electric, 1-1/2 HP Electric, 1-1/2 HP Pneumatic, 3/4 HPType electric 110V Single Phase 110V Single Phase 4 or 5 Motors
CFM 6cfm at 50% duty 8cfm at 50% duty 8cfm at 50% duty 1cfm for clamping 1cfm for clamping 20cfm at 50% dutycycle (90-120 psi) cycle (90-120 psi) cycle (90-120 psi) cycle (90 psi min) cycle (90 psi min) cycle (90-120 psi)
Cycle Time 1 second 1 second 1 second 1 second 1 second 2 second
Material 1-1/2" 4" 4" 4" 4" 4"Clamping Capacity
Hole 1/2" Material to 1/2" Material to 1/2" Material to 1/2" Material to 1/2" Material to 1/2" Material toCentering 1-1/2" Material 1-1/2" Material 1-1/2" Material 1-1/2" Material 1-1/2" Material 3/4" MaterialCapacity
Weight 40 lbs. 77 lbs. 138 lbs. 176 lbs. 179 lbs. 350 lbs.
Dimensions 19" x 14" x 23" 19" x 14" x 23" 19" x 14" x 23" 19" x 14" x 23” 19" x 14" x 23" 19" x 14" x 23"(HxWxD)
Tabletop 7-3/8" 7-3/8" 7-3/8" 7-3/8" 7-3/8" 7-3/8"Height
On-Center N/A N/A N/A N/A 3/4", 1", 1-3/4" 6"Spindle Spacings
Price $795.00 $2870.00 $3075.00 $3075.00 $3970.00 $9345.00
KREG
46 BORING & DRILLING DISTRIBUTED THROUGH BALLEW SAW & TOOL, INC.
www.ballewsaw.com [email protected] Fax: 1 (417) 865-3797
1
K4 Kreg Jig K4 Kreg Jig The Kreg Jig® is the perfect choice for DIY’ers and anyone new to
Pocket-Screw Joinery. Whether you’re building your first set of garage
storage shelves or making simple repairs around the house, the Kreg Jig®
can help you finish the job in less time, and with far less effort than you
ever thought possible. Its simple design gives you the confidence to start
the project, and with joints as easy as “Drill. Drive. Done!”
you’ll actually want to finish it.
Specifications:- Skill Builder DVD Included- Drill Guide Lifetime Guarantee- Fast Action Toggle Clamp- Doubles as a Repair Tool
Fast. Fun. Easy. The D.I.Y. Kreg Jig.
K4 K4 $ 99.99
Glass-Reinforced Nylon BodyThe blue body of the Kreg Jig® is actually made from a heavy-duty glass-reinforced nylon. This unique composite material offers the resiliency and flexibility you need without sacrificing the strength and durability Kreg customers have come to expect.
Superior AngleUnlike competing jigs with a shallower angle of approach, the Kreg Jig® features an optimized drilling angle specifically designed to increase driving efficiency and minimize the overall size of the Pocket-Hole. The result is a compact Pocket-Hole, less than 1-1/2” in size.
Wood-Chip ReliefThe Kreg Jig® includes 1 wood-chip relief hole for every Drill Guide hole, designed to keep the drill bit clear of excess wood chips, increasing the longevity of your drill bits, and allowing you to complete a perfect Pocket-Hole in one plunge instead of three!
Kit IncludesIncludes everything you need to get started with Pocket- Screw Joinery, including Kreg Jig®, Stepped Drill Bit, 6” Square Driver, Starter Screw Set, Starter Plug Set, SkillBuilder™ DVD, and Quick-Start Guide, all inside a compact and durable carrying case
Hardened Steel CoreDrill Guides are subject to direct contact with the drill bit every time a Pocket-Hole is created. The core of every Kreg Jig® features hardened steel which carries a 100% Lifetime Guarantee. The Kreg Jig®’s core shrouds the bit and supports the workpiece thru 100% of the drill-stroke.
Large Clamping RecessThe Large Clamping Recess makes it easy to secure your jig to your workbench using our multi-purpose Face Clamps™ or any common bar clamp or c-clamp.
Sturdy Toggle-ClampThe Kreg Jig®’s rear-mounted clamp design has been around since the first Kreg Jig®. It’s a proven design offering incredible rigidity and uncompromising workpiece hold-strength. Adjustments are as easy as releasing the lock-nut, and rotating to the correct setting.
3-Hole Removable Drill GuideOur patented 3-Hole removable Drill Guide lets you make perfectly placed Pocket-Holes in a wide variety of material widths and thicknesses, without ever having to release the clamp and reposition the workpiece. The Drill Guide can be removed completely from the benchtop base and used for making repairs just about anywhere.
KREG
CALL TOLL FREE TO ORDER 1 (800) 288-7483 47
Ballew Saw & Tool, Inc. 325 South Kimbrough Ave. | Springfield, MO | 65806 1 (800) 288-7483
For those times when Pocket-Holes won’t be hidden on the backside of your project or you want to highlight the decorative, use ourPocket-Hole Plugs. Pugs are offered in 7 solid wood species, and 5 plastic plug colors for use on laminated surfaces.
** 200 Count Discontinued; Subject to Stock on Hand.
Pocket Hole PlugsPocket Hole PlugsSOLID WOOD PLUGSSOLID WOOD PLUGSPART DESCRIPTION 50 COUNT PRICE 200 COUNT PRICE
P-CDRP-CDR CEADAR $6.99$6.99 $24.99**$24.99**P-OAKP-OAK OAK $6.99$6.99 $24.99**$24.99**P-MAPP-MAP MAPLE $6.99$6.99 $24.99**$24.99**P-PINP-PIN PINE $6.99$6.99 $24.99**$24.99**P-BAS*P-BAS* BASSWOOD $6.99$6.99 $24.99**$24.99**P-WALP-WAL WALNUT $6.99$6.99 $24.99**$24.99**P-CHEP-CHE CHERRY $6.99$6.99 $24.99**$24.99**P-PNTP-PNT PAINT GRADE $4.99$4.99 $17.99**$17.99**
PLASTIC CAPSPLASTIC CAPSPART DESCRIPTION 50 COUNT PRICE
C-BRN BROWNC-BRN BROWN $6.99 $6.99 C-BLK BLACK $6.99 C-BLK BLACK $6.99 C-WHT WHITEC-WHT WHITE $6.99 $6.99 C-ALM ALMONDC-ALM ALMOND $6.99 $6.99 C-LTB LIGHT BRN $6.99 C-LTB LIGHT BRN $6.99
Plastic Plugs are great for laminated surfaces and come in several colors.
Drill Bits and DriversDrill Bits and DriversDRILLSDRILLSPART DESCRIPTION PRICE
KJDKJD For Mini, Rocket, K2, K2000 and K3 $16.99$16.99KJD/200 KJD/200 For K200 Drilling Press $16.99$16.99DKDBDKDB For DK1100, DK3100 and Foreman $34.99$34.99LH-DKDB LH-DKDB For DK3100 Center Spindle (left hand) $39.99$39.99KJSC/DKJSC/D Depth Collar with Allen Wrench $2.49$2.49
DRIVERSDRIVERSPART DESCRIPTION PRICE
D3D3 3", 2 Square Driver $1.75$1.75D6D6 6", 2 Square Driver $2.75$2.75D3HTD3HT 3" Driver with Hardened Tip $2.75$2.75D6HTD6HT 6" Driver with Hardened Tip $3.75$3.75DDSDDS 3" and 6", 2 Square Driver Combo $4.49$4.49D6X2D6X2 (2) 6", 2 square drivers $5.49$5.49
KJD for Mini, Rocket, K2 and K2000 Kreg Jig®. One piece design eliminates clogging and provides a much smoother andfaster drilling stroke than the drill bits with replaceable center drills. Order KJD/200 for replacement bit for K200 drilling press.
DKDB for DK Machines. The DKDB has a dual - landed design and a very high grade alloy that combine to increase thebit’s life. Because the bit is 3/8" diameter it can also be used in any of our other jigs as a premium replacement. Hex shank willwork in either Industry or standard chuck.
hoosing the correct screw lengthepends on the size of the materialou are working with. Using theorrect screw will eliminate theossibility of breakthrough androvide optimum hold-strength onhe joint.
ind your correct screw length:/2” Stock: 1” Screw/4” Stock: 1-1/4” Screw-1/2” Stock: 2-1/2” Screwall screw lengths assume joiningtock of equal thickness)
hoosing the correct thread typeepends on the species of woodou are working with. Using theorrect screw will ensure maximumold pressure and dramaticallytrengthen each joint.
oarse Thread: Soft woods, andomposites Plywood, MDF, Pine,tc.ine Thread: Hard woods, Oak,aple, Walnut, Cherry, Hickory,
tc.i-Lo: For Use as a general pur-
pose screw and with medium hard-woods such as Poplar.
ML Maxi-Loc
KREG
48 BORING & DRILLING DISTRIBUTED THROUGH BALLEW SAW & TOOL, INC.
www.ballewsaw.com [email protected] Fax: 1 (417) 865-3797
224 Kreg Jig Distributed through Ballew Saw & Tool, Inc.
www.ballewsaw.com [email protected] Fax: 1-417-865-3797ALL MEASUREMENTS ARE IN INCHES UNLESS NOTED O
For those times when Pocket-Holes won’t be hidden on the backside of your project or you want to highlight the decorative, usePocket-Hole Plugs. Pugs are offered in 7 solid wood species, and 5 plastic plug colors for use on laminated surfaces.
** 200 Count Discontinued; Subject to Stock on Hand.
Choosing the correct screw lengthdepends on the size of the materialyou are working with. Using thecorrect screw will eliminate thepossibility of breakthrough andprovide optimum hold-strength onthe joint.
Find your correct screw length:1/2” Stock: 1” Screw3/4” Stock: 1-1/4” Screw1-1/2” Stock: 2-1/2” Screw(all screw lengths assume joiningstock of equal thickness)
Self-Tapping Pocket Hole ScrewsSelf-Tapping Pocket Hole ScrewsScrews are specially designed for pocket hole joiners. They feature a self-tapping auger
point that eliminates pre-drilling and a flat head that seats flush in the bottom of thepocket hole.
Choosing the right screw.We offer two thread types, two head styles and five different lengths to handle all
pocket hole applications. Find the right screw using the information below.MAXI-LOC™ FINEMAXI-LOC™ FINE
PART DESCRIPTION 100 500 1000 5000
SML - F125SML - F125 7, Fine Thread, 1-1/4" $4.69 $18.89 $27.99 $74.99$4.69 $18.89 $27.99 $74.99SML - F150SML - F150 7, Fine Thread, 1-1/2" $5.19$5.19 $20.99 $31.49$20.99 $31.49 $84.99$84.99
Maxi-Loc™ Fine: Standard for Hardwood. Washer head keeps screw from crushing into bot-tom of pocket hole, especially when going through soft materials into hard materials.
MAXI-LOC™ COARSEMAXI-LOC™ COARSEPART DESCRIPTION 100 500 1000 5000
SML-C1 SML-C1 8, Coarse Thread, 1" $4.49 $17.99 $26.99$4.49 $17.99 $26.99 $69.99$69.99SML-C125SML-C125 8, Coarse Thread, 1-1/4" $4.69 $18.89 $27.99 $74.99$4.69 $18.89 $27.99 $74.99SML-C150SML-C150 8, Coarse Thread, 1-1/2" $5.19 $20.99 $31.49 $84.99$5.19 $20.99 $31.49 $84.99SML-C2SML-C2 8, Coarse Thread, 2" $3.69/50 $14.69/250 --$3.69/50 $14.69/250 -- $64.99/3000$64.99/3000SML-C250SML-C250 8, Coarse Thread, 2-1/2" $5.19/50 $18.89/250 -- $59.99/2000$5.19/50 $18.89/250 -- $59.99/2000
Maxi-Loc™ Coarse: Standard for softwoods and composites. Washer head keeps screw fromcrushing into the bottom of the pocket hole. 8 size and aggressive thread provide excellentholding power in softwoods and composites like plywood, particle board and MDF. 1" lengthgreat for making drawer boxes with 1/2" material.
MAXI-LOC™ HI-LO SCREWSMAXI-LOC™ HI-LO SCREWSPART DESCRIPTION 100 500 1000 5000
SPS-HL125* SPS-HL125* 7, HI-LO Thread 1-1/4" $4.00 $15.00 $21.00$4.00 $15.00 $21.00 $75.00**$75.00**SML-HL125SML-HL125 7, HI-LO Thread 1-1/4" $4.69 $18.89 $27.99 $74.99**$4.69 $18.89 $27.99 $74.99**
Hi-Lo Screws: Hard and Medium Woods. This is as close as we come to an all - purpose screw.It’s thin like the SPS-F125 (below) so it will work in hardwoods like oak, but provides moreholding power and is harder to strip - out. Great for medium woods like cherry and poplar, andin a pinch you can even use it in soft woods, plywood and particle board.
PAN HEAD SCREWSPAN HEAD SCREWSPART DESCRIPTION 100 500 1000 5000
SPS-F1SPS-F1 6, Fine Thread 1" $4.49$4.49 $17.99$17.99 $26.99 $69.99**$26.99 $69.99**SPS -C1SPS -C1 7, Coarse Thread, 1" $4.49$4.49 $17.99$17.99 $26.99 $69.99**$26.99 $69.99**SPS- F075SPS- F075 6, Fine Thread, 3/4" $4.19 $16.79 $26.99 $64.99**$4.19 $16.79 $26.99 $64.99**SPS- F125SPS- F125 6, Fine Thread, 1-1/4" $4.69$4.69 $18.89 $27.99 $74.99**$18.89 $27.99 $74.99**SPS- F150SPS- F150 6, Fine Thread, 1-1/2" $5.19 $20.99 $31.49 $84.99**$5.19 $20.99 $31.49 $84.99**
Pan Head Screws: This is the same screw as the Maxi - Loc, only without the washer head. 1"fine works great for drawer fronts to 1/2" drawer boxes. New 1" coarse thread screw for assem-bling 1/2" drawer boxes.
Screw Length
Choosing the correct thread typedepends on the species of woodyou are working with. Using thecorrect screw will ensure maximumhold pressure and dramaticallystrengthen each joint.
Coarse Thread: Soft woods, andComposites Plywood, MDF, Pine,etc.Fine Thread: Hard woods, Oak,Maple, Walnut, Cherry, Hickory,etc.Hi-Lo: For Use as a general pur-pose screw and with medium hard-woods such as Poplar.
Thread Type
Choosing the correct head style depends on the species and size of the material you are working with.
The Maxi-Loc: washer-head screw is the most popular style, provides large surface area on screwhead Pan-Head: slightly smaller shank and diameter head size, preferred choice for extremely hard woods
Head StyleSML Maxi-Loc SPS Pan-Head **5000 Count Discontinued; Limited to Stock on Hand
KREG
CALL TOLL FREE TO ORDER 1 (800) 288-7483 49
Ballew Saw & Tool, Inc. 325 South Kimbrough Ave. | Springfield, MO | 65806 1 (800) 288-7483
Part Number Description Quantity/Per Box Price Quik-Adapt Quick Change Adapter for round shank bits $7.99
P-CDR-200 P-CDR-1000
Cedar Plugs 200 1000
$24.99 $109.99
P-CHE-200 Cherry Plugs 200 $24.99 P-MAP-200 Maple Plugs 200 $24.99 P-OAK-200 Oak Plugs 200 $24.99 P-PIN-200 Pine Plugs 200 $24.99 P-PNT-200
P-PNT-1000 Paint Grade Plugs 200
1000 $17.99
$109.99 P-WAL-200
P-WAL-1000 Walnut Plugs 200
1000 $24.99
$109.99
SPS-F150-5000 Pocket Screws 1-1/2”, #6 Fine, Pan Head 5000 $84.99 SML-F150-5000 Pocket Screws 1-1/2”, #7 Fine, Washer Head 5000 $84.99
SML-C125B-5000 Blue-Kote WR Pocket Screws 1-1/4”, #8 Coarse, Washer-Head
5000 $89.99
SML-C150B-5000 Blue-Kote WR Pocket Screws 1-1/2”, #8 Coarse, Washer-Head
5000 $99.00
SML-C250B-50 Blue-Kote WR Pocket Screws 2-1/2”,#8 Coarse, Washer-Head
50 $5.79
SML-C2X250-30 SML-C2X250-125
Pocket Screws 1-1/4”, #7, HI-LO 30 125
$5.49 $19.99
SML-C2B-3000 Blue-Kote WR Pocket Screws 2”, #8 Coarse, Washer Head
3000 $74.99
SPS-F075-5000 Pocket Screws, .75”, #6 Fine, Pan-Head 5000 $64.99 SPS-F1-5000 Pocket Screws 1”, #6 Fine, Pan-Head 5000 $69.99 SPS-C1-5000 Pocket Screws 1”, #7 Coarse, Pan-Head 5000 $69.99 SML-C1-5000 Pocket Screws 1”, #8 Coarse 5000 $69.99
SPS-F125-5000 Pocket Screws 1-1/4”, #6 Fine Pan-Head 5000 $74.99 SML-C125S5-1000 SML-C125S5-5000
305 Stainless Steel Pocket Screws 1-1/4”, #8 Coarse, Washer-Head
1000 5000
$125.99 $388.49
SML-F125S5-1000 SML-F125S5-5000
305 Stainless Steel Pocket Screws 1-1/4”, #7 Fine, Washer-Head
1000 5000
$131.49 $409.99
KREG DISCONTINUED ITEMS.
SUPPLIES LIMITED TO STOCK ON HAND. WHEN THEY ARE GONE THEY ARE GONE!!!!
KREG
50 BORING & DRILLING DISTRIBUTED THROUGH BALLEW SAW & TOOL, INC.
www.ballewsaw.com [email protected] Fax: 1 (417) 865-3797
SML-C150S5-5000 305 Stainless Steel Pocket Screws 1-1/2”, #8 Coarse, Washer-Head
5000 $419.99
Part Number Description Quantity/Per Box Price SDK-C2W-100 SDK-C2W-700
Weather Resistant Self-Tapping Deck Screws 100 700
$7.49 $49.99
SML-C125W-100 SML-C125W-1000 SML-C125W-5000
Weather Resistant Hole Pocket Screws 1-1/4”, #8 Coarse
100 1000 5000
$6.38 $35.99
$119.99 SML-C125-100
SML-C125-1000 Pocket Hole Screws 1-1/4”,
#8 Coarse 100
1000 $4.69
$27.99 SML-C150B-100
SML-C150B-1000 Pocket Hole Screws 1-1/2”, #8 Coarse 100
1000 $6.79
$40.99 SML-C150W-100
SML-C150W-1000 SML-C150W-5000
Weather Resistant Pocket Screws 1-1/2”, #8 Coarse
100 1000 5000
$6.75 $37.49
$127.99 SML-C2W-50
SML-C2W-3000 Weather Resistant Self-Tapping Screws 2”,
#8 Coarse 50
3000 $4.49
$89.99 SML-C2B-50
SML-C2B-250 Blue Kote Pocket Screws 2”, Coarse 50
250 $4.49
$16.79 SML-C250B-50 Blue Kote Pocket Screws 2-1/2”, Coarse 50 $5.79
SML-F125W-100 SML-F125W-1000
Weather Resistant Self-Tapping Pocket Screws 1-1/4”, #7 Fine, #2 Square Drive
100 1000
$6.38 $35.99
SPS-F125W-1000 SPS-F125W-5000
Weather Resistant Self-Tapping Pocket Screws 1-1/4”, #6 Fine, #2 Square Drive
1000 5000
$35.99 $119.99
SPS-F1W-100 SPS-F1W-1000 SPS-F1W-5000
Weather Resistant Self-Tapping Pocket Screws 1”, Fine Thread, #2 Square Drive
100 1000 5000
$5.99 $34.99 $99.99
SML-C2-3000 Pocket Hole Screws 2”, Coarse Thread 3000 $64.99 SPS-HL125-500
SPS-HL125-5000 Pocket Screws #7, HI-LO 1-1/4” Pan-Head 500
5000 $15.00 $75.00
NZ03-B Full Extension Drawer Counting Brackets $9.99 KMS7103 Precision Miter Gauge Add-on System $59.99 KMS7507 Mini-Trak – 24” (2’) $11.99 KMS7508 Mini-Trak – 36” (3’) $14.99 KMS7727 4’ Non-Adhesive Measuring Tape (LH Reading) $4.99 KMS7728 3.5 Meter Self-Adhesive Measuring Tape (RH) $7.49 KMS7831 Perfect Miter Attachment for Kreg Swing-Stop
& Solid-Stop $19.99
KKS1050 Kreg Klamp Vise Plate $34.99
KREG DISCONTINUED ITEMS (Cont.)
KREG
CALL TOLL FREE TO ORDER 1 (800) 288-7483 51
Ballew Saw & Tool, Inc. 325 South Kimbrough Ave. | Springfield, MO | 65806 1 (800) 288-7483