Konica_digitalga

02/01/2012 1Page:

Wulff EnterprisesGA Inventory for Sale

Manufacturer/Model# CTRL # Accessories CommentsMeter

KonicaMinolta BIZHUB 160 178821 ADF(DF-501)31

KonicaMinolta BIZHUB 160 179794 PFU(PF-501) ADF(DF-501)48

KonicaMinolta BIZHUB 161F 180253 SCAN(SU-502)NIC(NC-501)

Missing imaging unit - not tested,cassette #1 broken

20

KonicaMinolta BIZHUB 161F 183367 NIC(NC-501)48

KonicaMinolta BIZHUB 161F 185898 NIC(NC-501)118

KonicaMinolta BIZHUB 161F 185899 NIC(NC-501) paper cassette broken at mountingpoints

92

KonicaMinolta BIZHUB 161F 187005 SCAN(SU-502)NIC(NC-501)

29

KonicaMinolta BIZHUB 161F 191496 Tray broken in half,N/A

KonicaMinolta BIZHUB 180 178395 ST() PFU(PF-502 [A])ADF(DF-502)

Off color panels, start button inop - nottested

75

KonicaMinolta BIZHUB 200 179729 ST() RADF(DF-605)FAX(FK-503)

244

KonicaMinolta BIZHUB 200 180642 ST() RADF(DF-605)PU(PU-501) FN(FS-508)

127


Error code C2557 - ATDC sensor - notfully tested

229


Missing imaging unit - borrowed to262

KonicaMinolta BIZHUB 200 182108 ST() RADF(DF-605) Front door interlock switch broken -not tested, stand front door yellow

155


136


Front door cracked132


Platen cover on RADF loose253


299


216

KonicaMinolta BIZHUB 200 183459 ST() RADF(DF-605)129


251

KonicaMinolta BIZHUB 200 183528 ST() RADF(DF-605)FN(FS-508)

95 Error code C-1183 - elevator motorproblem - finisher tray bent - not

8000 Frank Ave. NW, North Canton, OH (330)478-4778 (330)478-4974(800)537-4373Tel: Fax: [email protected] www.wulffenterprises.com

02/01/2012 2Page:

Manufacturer/Model# CTRL # Accessories CommentsMeterGA Inventory for Sale

tested

KonicaMinolta BIZHUB 200 184640 ST() RADF(DF-605)FN(FS-508) FAX(FK-503)

Error code C2557 - ATDC error - notfully tested

123


Error code C2557 - ATDC sensorerror - not tested

284


Display is not coming up - not tested131


Right side panel cracked, back paneldented, frame bent in back, toner doorbroken, jamming in duplexer, leftpanel below fax port bent, void lines incopies

305


456


90

KonicaMinolta BIZHUB 200 185644 ST() Front door broken at hinge344


Machine will not power up - not tested226


163


216


Finisher trays out of alignment - errorcode C1183 - Elevator MotorProblem; FS-508, PU-501, or OT-601- finisher not tested

335



KonicaMinolta BIZHUB 200 187161 RADF(DF-605)PED(PC-402)

Bypass does not recognizing paper -not tested

368


81


Off color and dirty100


Touch screen not responding - notable to test, password protected

87

KonicaMinolta BIZHUB 200 188178 RADF(DF-605)PED(PC-402) FN(FS-508)

38


193


Control panel mounting bracket bent& housing not assembled

230


101 Off color and dirty, finisher gatebroken - missing covers, finisher front


02/01/2012 3Page:


cover borken


Lower finisher tray bracket bent, lowerfinisher tray broken, finisher frontcover scratched - removed to test, offcolor and dirty, toner spilled inmachien

213


Very dirty and off color, bottomfinisher tray bent - finisher not tested,top finisher tray missing, RADF feedtray borken

150


Off color, ground in dirt, lower finishertray brackets bent- finisher not tested,lower finisher tray broken

123


69


291


KonicaMinolta BIZHUB 200 190934 RADF(DF-605)PED(PC-402) FAX(FK-503)

541


360


106


283



54


128



RADF feed assembly broken - nottested, lower fnisher tray bracket bent

209





Electronic serial number does notmatch

302

NEC IT2530D 181732 ST() RADF(DF-605)FAX(FK-503)

420

NEC IT2530D 182181 ST() RADF(DF-605)71



02/01/2012 4Page:



90


247


215


Toner spilled in cassette #2470


308

KonicaMinolta BIZHUB 250 184989 ST() RADF(DF-605) Void lines in copies501



168



Front door broken at left hinge395


203

NEC IT2530D 187969 RADF(DF-605) PU(PU-501)PED(PC-102) FN(FS-508)FAX(FK-503)

Finisher front cover broken435



168

KonicaMinolta BIZHUB 250 188125 RADF(DF-605)PED(PC-102) E(JS-502)

392

KonicaMinolta BIZHUB 250 188143 ST() RADF(DF-605) Front door Broken356


Touch screen not responding - notfully tested

273


144


FInisher trays broken, lower finishertray bracket bent, uppoer finisher traymounts broken, all finisher coversscratched, control panel displayshattered, control panel cover broken,front door hinges broken

90

KonicaMinolta BIZHUB 250 188303 RADF(DF-605)PED(PC-102) FN(FS-508)FAX(FK-503)

Control panel housing broken, lowerfinisher tray brackets bent, lower trayfinisher tray broken, finisher frontpanel scratched, finisher back panelscratched, off color and very dirty

163


341


02/01/2012 5Page:



RADF & duplex jam every try; backduplex panel is twisted and out ofalignment

251


178


364


297


1232


235


66


22



Touch screen cracked; error codeC2557 (ATDC sensor problem)

539


Error code C2557 - ATDC sensor - nottested

276



272


Cassette #1 not feeding paper - nottested, back panel dented

515


Display not turning on - not tested290

KonicaMinolta BIZHUB 350 185895 ST() RADF(DF-605)PU(PU-501) FN(FS-508)FAX(FK-503)

Machine not power up - not tested,top finisher tray mount broken

179


522


Will not come to ready - not tested781


471


265


RADF outlet broken, stapler notstapling

112


PED right side access door missing -tested without

266


02/01/2012 6Page:



135



27


Finisher drive gear missing - nottested

108


220



75



121

KonicaMinolta BIZHUB 350 187552 ST() RADF(DF-605)PU(PU-501) FN(FS-508)FAX(FK-503)


238


478


709


Dark copies through RADF, fan ventdented

518

Muratec MFX-2850D 188019 ST() Off color panels96


197


Cassette 1& 2 handles broken,jamming in duplexer, error codeC2557 - ATDC sensor

771


866


107


228

Muratec MFX-2850D 188118 ST()71


Right side access door hinge broken844


Dark streaks in copies351


565


02/01/2012 7Page:



Touch screen cracked and notresponding, toner door broken, dirtyand off color

48


Lower finisher tray broaken bent -lower finisher tray missing, off colorand very dirty

152


LInes through copies, dirty panels131


199


231

Muratec MFX-2850D 189863 FN(2850FN) Has MAI-2850 PED, Off color panels320

Muratec MFX-2850D 189864 FN(2850FN) Has MAI-2850 PED, RADF yellow422

Muratec MFX-2850D 190795 ST()134


370


FInisher top trim panel broken354

KonicaMinolta BIZHUB 350 191747 ST() RADF(DF-605)FAX(FK-503) E(JS-502)

416

NEC IT3530 191869 SCAN(IE30) RADF(DF-605)PU(PU-501) PED(PC-402)FN(FS-508) FAX(FK-503)DX(AD-16)

283


Will not power up - not tested184


282

KonicaMinolta BIZHUB 360 188155 PED(PC-402) FN(FS-510)107

KonicaMinolta BIZHUB 361 186110 PED(PC-407) PC(IC-207)FN(FS-522) FAX(FK-502)

189

KonicaMinolta BIZHUB 361 187176 PED(PC-407) PC(IC-207)97

KonicaMinolta BIZHUB 361 188159 PED(PC-407) Front door broken, bypass notrecognizing paper - not tested

84


245


Panel below control panel out ofpostion not allowing control panel totilt

240

KonicaMinolta BIZHUB 420 183380 PED(PC-402)FOLD(SD-502) FN(FS-510)

Display states "copier cannot be usednow- contact your administrator"unable to clear; was able to run areport

153


02/01/2012 8Page:



Error code C-1102- finsiher lift motor,M7 or sensor, finisher trays out ofalignment - not tested, bypass traybroken

885

KonicaMinolta BIZHUB 420 183625 PED(PC-402) PC(IC-204)FN(FS-510)

Error code C-1102 - finisher lift motoror sensor - not tested

1209

KonicaMinolta BIZHUB 420 185625 ST() PC(IC-204)225


MIssing fax board, needs toner - nottested, back panel missing on rightside, has MT-501 mailbox

306

KonicaMinolta BIZHUB 420 187684 PU(PU-501) PED(PC-402)FOLD(SD-502) FN(FS-510)

420


792

KonicaMinolta BIZHUB 420 188121 ST() PU(PU-501)PC(IC-204) FN(FS-510)FAX(FK-502)

1220

KonicaMinolta BIZHUB 420 188124 PED(PC-202) FN(FS-510)FAX(FK-502)

Does not allow fax feature to beselected - not tested

628

KonicaMinolta BIZHUB 420 188129 ST() FN(FS-510)FAX(FK-502)

187

KonicaMinolta BIZHUB 420 189731 PU(PU-501) PED(PC-402)PC(IC-204) FOLD(SD-502)FN(FS-510)

214

KonicaMinolta BIZHUB 420 189737 PED(PC-202) PC(IC-204)FOLD(SD-502) FN(FS-510)

Saddlestitch interlock broken408


Jamming in duplexer - not tested,error code C-3201 fuser motorabnormality - machine was fully tested

374

KonicaMinolta BIZHUB 420 190931 PU(PU-501) PED(PC-402)PC(IC-204) FN(FS-511)

119


367


339


66

KonicaMinolta BIZHUB 420 191607 PED(PC-402) FAX(FK-502)FAX(FK-503)

Left side panel broken257


387



Bottom finisher tray broken424


02/01/2012 9Page:


KonicaMinolta BIZHUB 421 180348 ST() PC(IC-207)FAX(FK-502)

119


328


456

KonicaMinolta BIZHUB 421 184748 ST() FN(FS-522)596



262


158


94


449


153



74


174


342


562

KonicaMinolta BIZHUB 421 187321 PU(PU-501) PED(PC-206)FN(FS-522) FN(SD-507)FAX(FK-502)

Error code C-1102 - lift motor, M7 orsensor on Finisher - finisher nottested, finisher trays out of alignment

247

Oce 4222 187556 ST() PC(IC-207)FN(FS-522)

Missing fax board (knockout missing)203

KonicaMinolta BIZHUB 421 188162 PU(PU-501) PED(PC-407)FN(FS-522)

130


343


353


652

KonicaMinolta BIZHUB 421 190402 556 PED(PC-206) FN(FS-522)


02/01/2012 10Page:


FAX(FK-502)


269


379

KonicaMinolta BIZHUB 421 190908 ST() FN(FS-522) Does not recognize staples in stapler -not tested

446

KonicaMinolta BIZHUB 421 191227 ST() PC(IC-207)FN(SD-507) FN(FS-522)

228

KonicaMinolta BIZHUB 500 181719 PED(PC-402) FN(FS-510) Error code C-2702 - transfer corona orHVT problem - not tested

1150


291


Front door missing, top cassettehandle broken, jams in fuser, jammingin duplexer

1027


Cassettes 1& 2 handles broken1863


Cassette #2 handle broken, PEDunlock button broken - PED not tested

1427


Needs toner - not tested1439


237

KonicaMinolta BIZHUB 500 191795 PED(PC-402) Wrong finisher came with machine(FS-507)

253




Jamming at drum unit - not tested,grinding noise in machine, top finishertray trim panel missing

2229


281

KonicaMinolta BIZHUB 600 184738 PU(PK-505) PC(IC-202)FN(FS-504)

Finisher back panel dented463

Imagistics IM6020 184990 PU(PK-505) FN(FS-504) CH39-Registration shutter homesensor - not tested

886

KonicaMinolta BIZHUB 600 185624 PC(IC-202) FN(FS-504) Does not staples - not tested, finishergrinding

337

KonicaMinolta BIZHUB 600 186014 PU(PK-505) PC(IC-202)FN(FS-504)

Back panels dented, jamming instapler - not tested, finisher backpanel dented

359

Imagistics IM6020 186305 PC(IC-202) FN(FS-504)463


02/01/2012 11Page:


KonicaMinolta BIZHUB 600 187031 FN(FS-504) Back panel dented288

Imagistics IM6020 188791 FN(FS-602) Bent back finisher panel420

KonicaMinolta BIZHUB 600 188817 PU(PK-505) FN(FS-504)1238

KonicaMinolta BIZHUB 600 189793 PU(PK-505) FN(FS-504)FAX(FK-502)

553

KonicaMinolta BIZHUB 600 190803 PC(IC-202) FN(FS-504)669

KonicaMinolta BIZHUB 600 191796 PC(IC-202) FN(FS-504)675

KonicaMinolta BIZHUB 601 190673 PC(IC-208) FN(FS-524) Dark lines on copies, bottom of copiesblank, jamming at fuser

710

KonicaMinolta BIZHUB 750 188111 FN(FS-504)1192

KonicaMinolta BIZHUB 750 189262 PU(PK-505) PC(IC-202)P(LU-401) FN(FS-602)

Has inserter, front door broken,finisher back panel badly dented

1862

KonicaMinolta BIZHUB 750 190910 PC(IC-202) FN(FS-504)FAX(FK-502)

Finisher back panel dented701

KonicaMinolta BIZHUB 751 185917 PU(PK-505) FN(FS-524) Jamming in punch unit837

KonicaMinolta BIZHUB 751 187322 PU(PK-505) P(LU-405)FN(FS-524) FAX(FK-502)

Jamming in RADF379

KonicaMinolta BIZHUB 751 187323 PU(PK-505) PC(IC-208)P(LU-405) FN(FS-610)FAX(FK-502)

Error code C4707 - write unit bad - nottested

1291

KonicaMinolta BIZHUB 751 190674 PC(IC-208) FN(FS-610)FAX(FK-502)

False jam in machine - not tested,finisher knob missing, finisher backpanel badly scratched

600

KonicaMinolta BIZHUB 920 187265 P(LU-403) Has FS-5042288

KonicaMinolta BIZHUB 920 188177 PU(PK-505) P(LU-403)FN(FS-516)

3099

KonicaMinolta BIZHUB C200 189999 ST() RADF(DF-612)PFU(PC-105) DX(AD-505)B(MB-502)

Black lines through copies, bypasshinge cover missing, black meter =23k, color meter = 36k

59

KonicaMinolta BIZHUB C203 183393 ST() RADF(DF-611)FN(FS-519)

Black meter - 76k, color meter = 72k147

KonicaMinolta BIZHUB C203 186013 RADF(DF-611)PED(PC-405) FN(FS-519)

Black meter = 48k, color meter = 6k53

KonicaMinolta BIZHUB C203 187889 ST() RADF(DF-611) Black meter= 144k, color meter = 36k180

KonicaMinolta BIZHUB C203 189164 ST() RADF(DF-611) Black meter = 61k, color meter = 62k123

KonicaMinolta BIZHUB C203 189570 ST() RADF(DF-611)FN(FS-519) FAX(FK-502)




KonicaMinolta BIZHUB C203 190244 ST() RADF(DF-611)FAX(FK-502)




02/01/2012 12Page:





Jamming in RADF - not tested, blackmeter = 83k, color meter = 47k

130

Oce CM2520 183257 PU(PK-501) PED(PC-403)FN(FS-603) FAX(FK-502)

Error code C-3452 pressure heatertrouble - not tested, black meter =29k, color meter = 174k; hard driveremoved after testing

203

KonicaMinolta BIZHUB C250 186426 ST() RADF(DF-601)PU(PK-501) FN(FS-603)DX(AD-503)

Bypass tray broken, jamming in atbridge unit - finisher not tested, Falsejam in RADF - not tested, RADF topaccess door broken and scratched,black meter = 209k, color meter = 31k

239

KonicaMinolta BIZHUB C250 187037 ST() RADF(DF-601)FN(FS-603) FAX(FK-502)DX(AD-503)

Fuser guide broken, jamming infinisher - not tested, bridge unit panelsscratched, black meter = 541k, colormeter = 233k

773

Oce CM2520 187640 ST() FAX(FK-502) Off color and dirty, black meter = 37k,color meter = 33k

69

Oce CM2520 187641 ST() Touch screen not responding - notfully tested, Black meter = 13k, colormeter = 101k

114

KonicaMinolta BIZHUB C250 187895 RADF(DF-601)PED(PC-103) FAX(FK-502)DX(AD-503)

Error code C-B003 - fax board error -disabled to test, right side accesssdoor broken, balck meter = 95k, colormeter = 36k

131

Oce CM2520 188538 ST() Needs a new imaging unit to test;Broken bypass tray; color = 158k; B/W= 8k

166

Oce CM2520 188881 PED(PC-203) Color = 75k; B/W = 161k236

KonicaMinolta BIZHUB C252 181160 ST() RADF(DF-601) Touch screen not responding - notfully tested, black mter = 387k, colormeter = 28k

414


Touch screen not responding - notfully tested, black meter = 447k, colormeter = 157k

604

KonicaMinolta BIZHUB C252 187168 RADF(DF-601)PED(PC-103) FAX(FK-502)


93

KonicaMinolta BIZHUB C252 188153 RADF(DF-601)PED(PC-403)


73




Missing finisher - has bridge unit, rightside access door broken, black meter= 337k, color meter = 61k

397


02/01/2012 13Page:


KonicaMinolta BIZHUB C252 191658 RADF(DF-601)PED(PC-203) FN(FS-514)FAX(FK-502)

Grinding in finisher - jamming - nottested, Jamming in RADF whenreversing, black meter = 66k, colormeter = 6k

72

Oce CM2522 183914 ST() FN(FS-519)FAX(FK-502)


KonicaMinolta BIZHUB C253 184720 ST() PC(IC-409) Color = 26k; B/W = 3k28


Missing main board, hard-drive wasuninstalled, fax was uninstalled

N/A









KonicaMinolta BIZHUB C253 191608 ST() RADF(DF-611)FAX(FK-502) E(JS-505)



Color = 160k; B/W = 275k434


Lower finisher tray mount bent; brokenpost fuser inverter guide; color = 146k;B/W = 226k

371


72


Missing drum units184


Black meter = 228k, color meter =105k

332


KonicaMinolta BIZHUB C300 183446 RADF(DF-608) PU(PK-510)PED(PC-403) PC(IC-406)FN(FS-514)


13


BLack meter = 490k, color meter =52k

541

KonicaMinolta BIZHUB C300 189858 ST() RADF(DF-608)PU(PK-510) FN(FS-514)

Color = 41k; B/W = 37k77




Finisher back panel scratched, blackmeter = 41k, color meter = 20k

60

Imagistics CM3520 186075 ST() FN(FS-601) Needs toner - not tested, primary drivegear missing in bridge unit,

N/A


02/01/2012 14Page:


KonicaMinolta BIZHUB C350 187458 RADF(DF-601)PED(PC-201) PC(IC-401)FN(FS-601) DX(AD-501)

Jamming in finisher - not tested,bypass not recognizing paper - nottested, right side access door broken,black meter = 233k, color meter =321k

554

KonicaMinolta BIZHUB C351 191763 RADF(DF-601) PU(PK-501)PED(PC-402) PC(IC-402)FN(FS-603)

Jamming in RADF when reversing -not tested, LCT not feeding - nottested, black meter = 53k, color meter= 111k

164

KonicaMinolta BIZHUB C352 186017 RADF(DF-608)PED(PC-103) PC(IC-406)FAX(FK-502)

Black meter= 134k, color meter =497k

631




Blank copies, finisher stand trim panelmissing, black meter = 178k, colormeter = 82k

259





KonicaMinolta BIZHUB C353 184341 RADF(DF-611) PU(PK-515)PED(PC-405) FN(SD-505)FN(FS-519) FAX(FK-502)


464

KonicaMinolta BIZHUB C353 184342 RADF(DF-611) PU(PK-515)PED(PC-405) FN(SD-505)FN(FS-519) FAX(FK-502)


499



KonicaMinolta BIZHUB C353 188908 RADF(DF-611) PU(PK-515)PED(PC-204) FN(FS-519)FAX(FK-502)

Front door scratched, black meter =90k, color meter = 205k

295


Color = 258k; B/W = 143k401


Color = 289k; B/W = 195k484


Lower right side access door broken,stapler not jogging paper to staplecorrectly, black meter = 53k, colormeter = 15k

67





KonicaMinolta BIZHUB C353 190929 570 RADF(DF-611)PED(PC-204) FN(FS-519)

Jamming in RADF reversing - nottested, black meter = 397k, color


02/01/2012 15Page:


FAX(FK-502) meter = 174k


Lower right side access door broken,black meter = 23k, color meter = 21k

44



KonicaMinolta BIZHUB C450 186338 PED(PC-102) FN(FS-603) Finisher bridge unit smashed - finishernot tesetd, right side access doorbroken, jamming in RADF, blackmeter = 408k, color meter = 35k

443

KonicaMinolta BIZHUB C450 186370 PU(PK-501) PED(PC-402)FN(FS-603)

False jam in RADF - not tested,jamming in bridge unit - finisher nottested, black meter = 333k, colormeter = 66k, PED front panel cracked

398

KonicaMinolta BIZHUB C450 186420 PED(PC-202) FN(FS-507) Black meter = 1305k, color meter -72k

1377

Imagistics CM4520 186716 PED(PC-402) FN(FS-507)FAX(FK-502)


KonicaMinolta BIZHUB C450 187040 PED(PC-402) FN(FS-507)FAX(FK-502)


423


Black meter = 365k, color meter =178k, off color panels

542



408


Bridge unit entrance broken, backpanel dented, black meter = 328k,color meter = 151k

478


Finisher gear assembly bent - finishernot tested, paper sensor missing outof cassette #2 - not tested, blackmeter = 367k, color meter = 236k

603

Imagistics CM4520 187687 PU(PK-501) PED(PC-202)FN(FS-603)

False door indicator in finisher - nottested, finisher cable pulled, cablecover cracked, black meter = 839k,color meter = 75k

914

KonicaMinolta BIZHUB C450 187946 PED(PC-402) Black meter = 251k, color meter =805k

1056

KonicaMinolta BIZHUB C450 187954 PED(PC-202) FN(FS-603) Black meter = 63k, color meter =101k, off color panels, blurry B/Wcopies

164

KonicaMinolta BIZHUB C450 188441 PED(PC-402) FN(FS-507) Blurry copies. black meter = 292k,color meter = 46k

338


Finisher in false jam & will not clear-inop, black meter = 893k, color meter= 67k

959

KonicaMinolta BIZHUB C450 189732 PU(PK-501) PED(PC-402)FN(FS-507) FAX(FK-502)

Bridge unit broken - finisher nottested, knocking noise in machine,black meter = 512k, color meter =106k

618


02/01/2012 16Page:


KonicaMinolta BIZHUB C450 189733 PU(PK-501) PED(PC-402)FN(FS-507) FAX(FK-502)

Touch screen not responding - nottested, false jam in fuser, black meter= 130k, color meter = 65k

195

KonicaMinolta BIZHUB C450 189738 PED(PC-202) FN(FS-603) Black meter = 66k, color meter = 111k176

KonicaMinolta BIZHUB C450 189784 PED(PC-202) PC(IC-402) Missing PC upgrade cables, blackmeter = 100k, color meter = 299k

399


Missing toner - not tested, missingfinisher bridge unit, black meter =156k, color meter = 60k

215

Imagistics CM4520 191610 PED(PC-202) FN(FS-603)FAX(FK-502)

Touch screen blank - not tested,bridge unit socket broken, bridge unitgear missing

N/A

Oce CM4521 179556 FN(9834) Black meter = 99k, color meter = 514k613

KonicaMinolta BIZHUB C451 181094 FN(FS-519) FAX(FK-502) Finisher lower bracket bent - finishernot tested, black meter = 402k, colormeter = 108k, control panel mountbracket missing

510

KonicaMinolta BIZHUB C451 183330 FN(FS-519) FAX(FK-502) Error code C1191 - output OPadjustment - stapler not tested, blackmeter = 421k, color meter = 3k

424

KonicaMinolta BIZHUB C451 183339 FN(FS-519) FAX(FK-502) Black meter = 260k, color meter =319k

579


756

Oce CM4521 183915 FN(9834) FAX(FK-502) RADF cover broken, jamming infinisher - not tested, black meter =117k, color meter = 57k

173

KonicaMinolta BIZHUB C451 184652 FN(FS-519) FAX(FK-502) Lower finisher tray bracket bent - nottested, black meter= 308k, color meter= 159k

467

KonicaMinolta BIZHUB C451 185639 PU(PK-515) FN(FS-519)FAX(FK-502)

Color = 166k; B/W = 159k325

NEC IT45C4 186005 FN(FS-519) Right side panel has hole, black meter= 196k, color meter = 125k

320


Error code 11BO - output OP stapleunit drive- finisher not tested, staplerwill not move, black meter= 474k,color meter= 118k

591

NEC IT45C4 186018 FN(FS-519) Black meter = 136k, color meter =125k

261

KonicaMinolta BIZHUB C451 186068 FN(FS-519) Black meter = 362k, color meter = 81k443

KonicaMinolta BIZHUB C451 186372 FN(FS-608) FAX(FK-502) Black meter = 144k, color meter = 61k205

KonicaMinolta BIZHUB C451 186830 FAX(FK-502) Black meter = 335k, color meter = 3k337

KonicaMinolta BIZHUB C451 186831 FAX(FK-502) Black splotches on copies - not fullytested, black meter - 336k, colormeter = 5k

340


02/01/2012 17Page:


KonicaMinolta BIZHUB C451 187010 PC(IC-409) FN(FS-608) Black meter = 29k, color meter = 52k81

Oce CM4521 187111 FN(9834) RADF socket broken, metal bracketbent, black meter = 351k, color meter= 160k

510

Oce CM4521 187112 FN(9834) Bridge unit socket broken, RADFsocket broken, black meter = 160k,color meter = 445k

604


Error code C8104 - glass movementtrouble - not tesetd, bridge unit bent,RADF socket broken, black meter =320k, color meter = 47k

367


Error code C-5356 - cooling fanrotation trouble - unable to test, faxcover dented, black meter = 679k,color meter = 168k

847


1070

KonicaMinolta BIZHUB C451 187965 PU(PK-512) PC(IC-409)FN(FS-517) FAX(FK-502)

Jamming in finisher - not tested, blackmeter = 628k, color meter = 560k

1187

KonicaMinolta BIZHUB C451 187971 Almost black copies, color copiescovered in black toner; black meter =356k, color meter = 240k

596


Color = 209k; B/W = 127k336

KonicaMinolta BIZHUB C451 189152 PC(IC-409) FN(FS-608) Error code C-0202 main body tray 1feeder up/down abnormality, blackmeter = 105k, color meter = 149k

253

KonicaMinolta BIZHUB C451 189153 PC(IC-409) FN(FS-608) Passes black copies; bent backfinisher panel; Black meter = 137k,color meter = 188k

325



350

KonicaMinolta BIZHUB C451 189196 PU(PK-512) FN(FS-608) Black meter = 282k, color meter =261k

542

KonicaMinolta BIZHUB C451 189269 FN(FS-519) Back panel broken in lower rightcorner, black meter = 273k, colormeter = 34k

307

KonicaMinolta BIZHUB C451 189742 PU(PK-512) PC(IC-409)FN(FS-608)


KonicaMinolta BIZHUB C451 190928 FN(FS-519) Void lines on copies, black meter =95k, color meter = 140k

234

KonicaMinolta BIZHUB C451 191090 Black meter =383k, color meter =128k

510

KonicaMinolta BIZHUB C452 190657 PU(PK-517) PC(IC-412)P(LU-204) FN(FS-527)

Finisher saddlestitch tray missing,jamming in finisher - not tested,

639

KonicaMinolta BIZHUB C452 191923 FN(FS-527) FAX(FK-502) Black meter = 76k76


02/01/2012 18Page:


KonicaMinolta BIZHUB C500 176217 RADF(DF-319) PC(IP-901)P(LT-211) INSU(PI-110)FN(FS-606)

Dented back finisher panel; color =2465k; B/W = 47k

2512

KonicaMinolta BIZHUB C500 179164 RADF(DF-319) PC(IP-921)FN(FS-606)

Finisher back panle dneted, PC doesnot come to ready - not tested, blackmeter = 99k, color meter = 326k

425

KonicaMinolta BIZHUB C500 189875 RADF(DF-319) PU(PK-508)PC(IP-921) FN(FS-606)

Black meter = 331k, color meter =918k, Jamming at punch unit - punchunit not tested; color = 918k; B/W =331k

1249

KonicaMinolta BIZHUB C550 181466 FN(FS-517) FAX(FK-502) Very dirty, needs staples - not tested,missing finisher tray, back finsiherpanel bent, black meter = 357k, colormeter = 92k

449

KonicaMinolta BIZHUB C550 181796 PU(PK-512) P(LU-301)FN(FS-517) FAX(FK-502)

Jamming in stapler - not tested,machine wheels cruched, black meter= 388k, color meter = 7k

394



KonicaMinolta BIZHUB C550 181798 PU(PK-512) P(LU-301)FN(FS-517)

Jamming in stapler and punch unit -not tested, black meter = 629k, colormeter = 74k

702

KonicaMinolta BIZHUB C550 183390 PU(PK-512) FN(FS-517) Jamming at punch unit, black meter =305k, color meter = 505k

809

KonicaMinolta BIZHUB C550 184684 PC(IC-409) FN(FS-517) Back panel dented, black meter = 9k,color meter = 98k

107



568

KonicaMinolta BIZHUB C550 186313 FN(FS-608) Control panel smashed - not testedN/A


941

KonicaMinolta BIZHUB C550 187006 PU(PK-512) FN(FS-517) Noise in finisher, Jamming in RADF,black meter = 135k, color meter =804k

938

KonicaMinolta BIZHUB C550 187011 PU(PK-512) PC(IC-409)FN(FS-608)


861


Color = 121k; B/W = 461k581

KonicaMinolta BIZHUB C550 188998 PU(PK-512) FN(FS-608) B/W copies very light; color = 128k;B/W = 635k

762


Error code C-5104 - transfer beltmode - not tested, finisher back paneldented, black meter = 498k, colormeter = 307k

804


316


02/01/2012 19Page:


KonicaMinolta BIZHUB C550 191656 PU(PK-512) FN(FS-517) Black meter = 588k, color meter = 74k661

KonicaMinolta BIZHUB C5500 179550 RADF(DF-609) PC(IC-408)P(LU-202) FN(FS-607)



Color = 452k; B/W = 1207k1658


Black meter - 436k, color meter =484k

920

KonicaMinolta BIZHUB C650 190053 FN(FS-517) FAX(FK-502) Black meter = 192k, color meter = 71k262

Oce 6522C 187557 PU(PK-516) FN(FS-526) Black developer unit will not set-cannot set properly (unable to testmachine)

610

KonicaMinolta DI 1610FP 178473 13

Pitney Bowes DL750 180510 PC(9848) Jamming in bypass - not tested, fuserturn handle broken - jamming in fuser,yellow, , missing fiery cables, missingfinisher - has brackets

631

Minolta DI 5510 191316 PC(PI7200E) FN(FN-121)684

Minolta DI 5510 191317 PU(PK-5) PC(PI7200E)FN(FN-121)

957

Minolta DI 5510 191318 PU(PK-5) FN(FN-122)821

We maintain a constantly changing inventory of over 4000 used copiers, faxes and duplicators.While we make every effort to keep this list as current as possible, the list you are viewing may have already changed.

Please call our sales team for current availability.


Konica_digitalga

Documents

Transcript of Konica_digitalga