KONE Access™ Planning guide This planning guide provides the ...
KONE 2009 Architecturall Planning Guide
-
Upload
ionut-gabriel-sarb -
Category
Documents
-
view
216 -
download
0
Transcript of KONE 2009 Architecturall Planning Guide
8/12/2019 KONE 2009 Architecturall Planning Guide
http://slidepdf.com/reader/full/kone-2009-architecturall-planning-guide 1/16
Architectural Planning Guide2009
8/12/2019 KONE 2009 Architecturall Planning Guide
http://slidepdf.com/reader/full/kone-2009-architecturall-planning-guide 2/16
KONE EcoDisc®
Proven Technology
• More than 10 years of experience with
EcoDisc technology, including the first
Machine Room-Less (MRL) installation
• Over 200,000 MRL installations worldwide
• Applicable from 2 to 100+ floors
Eco-efficient™
• The EcoDisc consumes 50% less
energy than a traction application
• The EcoDisc consumes 70% less
energy than hydraulic applications
• Energy savings:• 4000 kWh/year compared to hydraulic
elevator • 2000 kWh/year compared to traction
2-speed elevator
• Carbon footprint reduction:
(based on OECD electrical energy mix*)
• 4938 lb (2240 kg) CO2/year
compared to hydraulic elevator • 2469 lb (1120 kg) CO2/year
compared to traction 2-speed elevator
RedefiningElevatorTechnology
EcoDisc Applications• Regenerative Drive systems are available
on certain applications and alone can
recover up to 25% of the energy used
Performance
• Gearless traction performance from the
lowest to highest speeds and loads
• No geared traction, no hydraulics
MRL Solutions
• Rail-supported EcoDisc hoisting machine
• Minimal building interface
• Low-rise EcoSpace™ solution which fits in
a hydraulic hoistway
• Mid-rise MonoSpace® solution for
applications up to 230' (70 m) of travel
Space Savings
• In low- to mid-rise elevators, the compact
EcoDisc structure eliminates the traditional
machine room
• In high-rise and speed systems, EcoDisc
offers remarkable space savings
The Machine Room-LessLeader – with more than200,000 MRL installations worldwide
Select Your EcoDisc Powered Elevator
• Sustainable, energy-efficient design
• Gearless traction (no hydraulics)
• The world’s leading MRL technology
• Superior ride quality
• Applications from 2 to 100+ floors
* The average OECD electrical energy mix is
defined as 13% gas, 16% hydro, 23% nuclear,7% oil, 33% store coal, 6% lignite coal, 1.5%bio mass & waste and 0.5% other.
8/12/2019 KONE 2009 Architecturall Planning Guide
http://slidepdf.com/reader/full/kone-2009-architecturall-planning-guide 3/16
Select your EcoDisc powered elevator
Application Low-Rise
Type MRL
Powered by EcoDisc
Capacity 2000 – 5000 lb
(907 – 2268 kg)
Speed 150 fpm (.75 m/s)
Landings 2 to 10
Machine Room-Less performance
in a new or existing hoistway:
Designed specifically to fit in the
hydraulic footprint, KONE
EcoSpace delivers pure traction
Machine Room-Less performance
to low-rise buildings.
• No oil
• No hole drilling
• Uses 70% less energy than
hydraulic applications
• Minimal building interface
• Ideal solution for replacement of existing hydraulic elevator
(contact KONE Sales Professional)
Application Mid-Rise
Type MRL
Powered by EcoDisc
Capacity 2000 – 4500 lb
(907 – 2041 kg)
Speed 200 – 500 fpm
(1.0 – 2.54 m/s)
Landings 6 to 27
The Machine Room-Less solution
that launched a revolution:
Introduced nearly a decade ago,
KONE MonoSpace forever changed
the vertical transportation landscape
by eliminating the requirement for
a machine room.
• Consumes approximately 50%
less energy than conventional
traction machines
• Creates more usable space –
variable machine locations• Superior ride quality
• Minimal building interface
Application Mid to High-Rise
Type MR
Powered by EcoDisc
Capacity 2000 – 5000 lb
(907 – 2268 kg)
Speed 200 – 700 fpm
(1.0 – 3.5 m/s)
Landings 6 to 63
Innovative, space efficient, mid-high
rise system: KONE EcoSystem MR
elevators use next generation
KONE EcoDisc hoisting machines
that require only half the overhead
machine room space of traditional
traction elevators.
• Energy efficient
• Superior acceleration/
deceleration profile
• Improved floor-floor times
and leveling
Application High-Rise
Type MR
Powered by EcoDisc
Capacity 2000 – 8000 lb
(907 – 3629 kg)
Speed 700 – 1600 fpm
(3.5 – 8.13 m/s)
Landings 6 to 126
State-of-the-art technology, a truly
extraordinary elevator system:
KONE Alta elevators are developed
for the next generation of super-tall
buildings of up to 1600 ft (480 m)
in height.
• Reaches speeds of up to 1600
fpm (8.13 m/s)
• Super efficient
• High power-to-weight ratio
The special Silent Car ™
technologyapplied on both single and high
capacity double-decker cars ensures
a smooth and quite ride.
KONE AltaKONE EcoSpace KONE MonoSpace KONE EcoSystem MR
For the latest product information and interactive design tools, visit www.kone.com
8/12/2019 KONE 2009 Architecturall Planning Guide
http://slidepdf.com/reader/full/kone-2009-architecturall-planning-guide 4/16
KONE EcoSpaceKey Attributes
Notes
(1) A hoist beam (by KONE) is required for installation (by others). Dimension reflectsclear under hoist beam.
(2) If an EBD (Emergency Battery Device) is required please contact your KONE SalesProfessional for further detail regarding dimension .
(3) The published hoistway x dimensions represent the minimum clear insiderequirements. Construction efficiencies can be realized by increasing these dimensionsby up to 2" (51 mm).
(4) For seismic zones, add 4" (102 mm) to dimension for 2000 lb (907 kg) and 2500lb (1134 kg) capacity applications.
(5) For pit depths less than 5' (1524 mm) please contact a KONE Sales Professional.
(6) No occupied space below the pit is allowed with EcoSpace.
(7) All dimensions are based on an 8'-0" (2438 mm) cab with a 7'-0" (2134 mm) door. Alternate car and door heights are available, but will affect dimension .
(8) Contact your local KONE Sales Representative regarding local code variations whenutilizing the integral and remote closet options.
Visit www.kone.com for the latest job specific details,CAD drawings, specifications, electrical data, reaction loadsand building access requirements.
B
MAX TRAVEL
83ft (25 m)
MAX LANDINGS
10SPEED
150 fpm (.75 m/s)
CAR HEIGHT
8, 9 or 10 ft (2438, 2743 or 3048 mm)
ENTRANCE HEIGHT
7, 8 or 9 ft (2134, 2438 or 2743 mm)
MINIMUM OVERHEAD HEIGHT
13 ft (3962 mm)
MINIMUM PIT DEPTH
5 ft (1524 mm)
Remote Control Closet
(option 1)
Adjacent or Remote Control Room
(option 2)
Integral Controller Space
(standard)
H
H
F G
TRAVEL G
I
(3)
(4)(3)
(5)
A
A
A
C
D
K
B
B
L
K
L
J
J
J
L
J
E
(1)
F
G
H
I
K O N E E c o S p a c e
K O N E M o n o S p a c e
K O
N E E c o S y s t e m M
R
K
O N E A l t a
C o n t r o l S p a c e
CAPACITY LBS (KG) CONTROLLER SPACE WIDTH (mm) DEPTH (mm) DOOR WIDTH (mm)
2000 to 3500 integral or remote closet 3'-6" 1'-8" 3'-0"(907 to 1588) (1067) (508) (914)
4000 to 5000 integral or remote closet 4'-2" 1'-8" 3'-6"(1814 to 2268) (1270) (508) (1067)
2000 to 5000 adjacent room 5'-0" dimension (B) 3'-0"(907 to 2268) (1524) (914)
S E R V I C E
P A S S E N G E R
F r o n t & R e v e r s e O p e n i n g
F r o n t O p e n i n g
2000 (907) SSP 7'-4" (2235) 6'-31 ⁄ 4" (1911) 5'-8" (1727) 4'-3" (1295) 3'-0" (914)
2500 (1134) SSP-CO 8'- 4" (2540) 6'-31 ⁄ 4" (1911) 6'-8" (2032) 4'-3" (1295) 3'-6" (1067)
3000 (1361) SSP-CO 8'- 4" (2540) 6'-11" (2108) 6'- 6" (1981) 5'- 0" (1524) 3'- 6" (1067)
3500 (1588) SSP-CO 8'- 4" (2540) 7'-51 ⁄ 4" (2267) 6'-6" (1981) 5'-63 ⁄ 16" (1681) 3'- 6" (1067)
4000 (1814) CO 9'-4" (2845) 7'-51 ⁄ 4" (2267) 7'-513 ⁄ 16" (2281) 5'-63 ⁄ 16" (1681) 4'- 0" (1219)
4000 (1814) 2SP 7'-4" (2235) 10'-11 ⁄ 2" (3086) 5'-63 ⁄ 16" (1681) 7'-7 7 ⁄ 16" (2323) 4'- 0" (1219)
4500 (2041) 2SP 7'-4" (2235) 10'-7 1 ⁄ 2" (3238) 5'-63 ⁄ 16" (1681) 8'-13 ⁄ 8" (2473) 4'- 0" (1219)
5000 (2268) 2SP 7'-4" (2235) 11'-31 ⁄ 4" (3435) 5'-63 ⁄ 16" (1681) 8'-93 ⁄ 16" (2672) 4'- 0" (1219) S E R V I C E
P A S S E N G E R
CAPACITY OPENING HOISTWAY HOISTWAY INTERIOR INTERIOR DOORLBS (KG) TYPE WIDTH (mm) DEPTH (mm) WIDTH (mm) DEPTH (mm) WIDTH (mm)
2000 (907) SSP 7'-4" (2235) 5'-9" (1753) 5'-8" (1727) 4'-3" (1295) 3'-0" (914)
2500 (1134) SSP-CO 8'-4" (2540) 5'-9" (1753) 6'-8" (2032) 4'-3" (1295) 3'-6" (1067)
3000 (1361) SSP-CO 8'-4" (2540) 6'-3" (1905) 6'-6" (1981) 5'- 0" (1524) 3'-6" (1067)
3500 (1588) SSP-CO 8'-4" (2540) 6'-11" (2108) 6'-6" (1981) 5'-63 ⁄ 16" (1681) 3'- 6" (1067)
4000 (1814) CO 9'-4" (2845) 6'-11" (2108) 7'-513 ⁄ 16" (2281) 5'-63 ⁄ 16" (1681) 4'- 0" (1219)
4000 (1814) 2SP 7'-4" (2235) 9'-2" (2794) 5'-63 ⁄ 16" (1681) 7'-7 7 ⁄ 16" (2323) 4'- 0" (1219)
4500 (2041) 2SP 7'-4" (2235) 9'-8" (2946) 5'-63 ⁄ 16" (1681) 8'-13 ⁄ 8" (2473) 4'- 0" (1219)
5000 (2268) 2SP 7'-4" (2235) 10'-21 ⁄ 4" (3105) 5'-63 ⁄ 16" (1681) 8'-93 ⁄ 16" (2672) 4'- 0" (1219)
EcoSpace
(6)
E
(2)
A B C D E
J K L
(2)
H
8/12/2019 KONE 2009 Architecturall Planning Guide
http://slidepdf.com/reader/full/kone-2009-architecturall-planning-guide 5/16
Space EfficiencyPossibility to accommodate reduced headroomheight and pit depth. The KONE EcoDisc machine is so compact there is no need for a machine room above, as it fits right intothe hoistway.
Energy-efficient
The revolutionary gearless KONE EcoDisc machine has only one moving part and is three times more efficient than a hydraulic-powered unit using 70% less energy – with the potential to cut annual operating costs in half orbetter – a true energy miracle.
Minimal DisruptionEcoSpace EB fits inside the existing hydraulic hoistway, minimizing the need for modifications.
Reusable EntrancesKONE EcoSpace EB reduces significant structural modifications by seamlessly interfacing withmost existing hydraulic entrances.
Modern, Code-compliantModern, simple and code-compliant operatingdisplays.
High PerformanceOptimal stopping accuracy for a smooth ride.
No OilThe hydraulic cylinder is drained of all oil and capped, ensuring oil free, environmentally-friendly operation.
KONE EcoSpace is also applicable for
existing buildings with hydraulic elevators.
This turnkey solution replaces the hydraulic
system with innovative MRL technology.
Why Replace?
Instead of replacing your old elevators with
similar technology, KONE offers you a new
choice. Our innovative Machine Room-Less
design is the first turnkey full replacement
elevator solution for existing hydraulic
elevators. Thanks to the revolutionary KONE
EcoDisc motor, EcoSpace EB fits into the
existing hydraulic hoistway with capability
to seamlessly interface with your existing
entrances.
KONE has sold over 200,000 Machine
Room-Less elevators globally, with an
excellent record of operating reliability.
So, instead of complicated, lengthy and
expensive retrofit upgrades, KONE provides
a brand new elevator.
• Everything from the site survey to the
dismantling of the existing equipment is
carefully thought out in order to minimizedisruption to your building.
• Our optimized maintenance program
minimizes downtime and ensures safe
and reliable lifetime operation.
EcoSpace EB Advantages
• For the owner: Minimized building
disruption, increased property value,
accommodates reduced pit depth
and overhead
KONE EcoSpace EB™
The Benefits are Clear K O N E E c o S p a c e
K O N E M o n o S p a c e
K O
N E E c o S y s t e m M
R
K
O N E A l t a
1
2
3
4
5
6
7
2
3
4
5
6
7
1
• For the tenant: Smoother, quieter ride,
no hydraulic oil odor, optimum stopping
accuracy, sophisticated car features
• For the environment: No hydraulic oil,
energy-efficient, recycle existing elevator
where feasible, minimize building materials
8/12/2019 KONE 2009 Architecturall Planning Guide
http://slidepdf.com/reader/full/kone-2009-architecturall-planning-guide 6/16
K O N E E c o S p a c e
K O N E M o n o S p a c e
K O
N E E c o S y s t e m M
R
K
O N E A l t a
Clear Overhead and Pit DepthH I
KONE MonoSpace Planning Guide:Machine at Rear Configuration – Optimizes Space (Available in passenger shape with front opening option)
Max Travel230 ft. (70.1 m)
Max Landings
36Speed200, 350, 500 fpm (1.00, 1.78, 2.54 m/s)
Car Height8, 9 or 10 ft. (2438, 2743 or 3048 mm)
Entrance Height7, 8 or 9 ft. (2134, 2438 or 2743 mm)
Notes(1) Shallower Pit Depths may be available per
specific applications. Contact your KONESales Professional for further information.
(2) Buffer service platforms are required whenpit depth exceeds 8'-6" (2590 mm).
(3) Hoist beams (by KONE) are required for installation (by others). Dimensionreflects clear under hoist beam.
(4) If occupied space exists below the hoistway,consult your KONE Sales Professional.
(5) All dimensions are based on an 8'-0" (2438mm) cab with a 7'-0" (2134 mm) door.
Alternate car and door heights are available,but will affect dimension .
(6) For seismic applications (zone 2 or greater)add 4" (102 mm) to hoistway width and 13"(330 mm) to the pit depth.
(7) If an EBD (Emergency Battery Device) isrequired, please contact your KONE Sales
Professional for further detail regardingdimension .
(8) Contact your local KONE Sales Representativeregarding local code variations when utilizingthe integral and remote closet options.
F
G
H
H
Visit www.kone.com for the latestjob-specific details, CAD drawings,specifications, electrical data,reaction loads and building accessrequirements.
J
8/12/2019 KONE 2009 Architecturall Planning Guide
http://slidepdf.com/reader/full/kone-2009-architecturall-planning-guide 7/16
Plan Views
Remote Control Closet(option 1)
Adjacent or Remote Control Room
(option 2)
Integral Controller Space (standard)
(6)
A
C
D
K
B
B
L
K
LJ
J
L
J
E
Section View
(3)
(1) (2) (6)
H F G
G
I
(4)
(5)
TRAVEL
(7)
(7)
(7)
8/12/2019 KONE 2009 Architecturall Planning Guide
http://slidepdf.com/reader/full/kone-2009-architecturall-planning-guide 8/16
K O N E E c o S p a c e
K O N E M o n o S p a c e
K O
N E E c o S y s t e m M
R
K
O N E A l t a
KONE MonoSpace Planning Guide:Machine at Side Configuration – (Available in passenger and service shape with front and rear opening options)
Max Travel230 ft. (70.1 m)
Max Landings36
Speed200, 350, 500 fpm (1.00, 1.78, 2.54 m/s)
Car Height8, 9 or 10 ft. (2438, 2743 or 3048 mm)
Entrance Height7, 8 or 9 ft. (2134, 2438 or 2743 mm)
Notes(1) Shallower Pit Depths may be available per specific
applications. Contact your KONE Sales Professional for further information.
(2) Buffer service platforms are required when pitdepth exceeds 8'-6" (2590 mm).
(3) A hoist beam (by KONE) is required for installation
(by others). Dimension reflects clear under hoistbeam.
(4) If occupied space exists below the hoistway,consult your KONE Sales Professional.
(5) All dimensions are based on an 8'-0" (2438 mm)cab with a 7'-0" (2134 mm) door. Alternate car and door heights are available, but will affectdimension .
(6) For 2000 lb (907 kg) capacity maximum travel =90' (27.4 m) and maximum openings = 10.
(7) For 2500 lb – 4500 lb (1134 kg – 2041 kg) capacitymaximum travel = 230' (70 m) and maximumopenings = 36.
(8) For front opening seismic applications (zone 2 or greater) add 4" (102 mm) to hoistway width and5" (126 mm) to hoistway depth.
(9) For front and reverse opening seismic applications(zone 2 or greater) add 4" (102 mm) to hoistwaywidth.
(10) If an EBD (Emergency Battery Device) is required,please contact your KONE Sales Professional for
further detail regarding dimension .
(11) Contact your local KONE Sales Representativeregarding local code variations when utilizing theintegral and remote closet options.
F
G
H
H
Visit www.kone.com for the latestjob-specific details, CAD drawings,specifications, electrical data,reaction loads and building access
requirements.
J
8/12/2019 KONE 2009 Architecturall Planning Guide
http://slidepdf.com/reader/full/kone-2009-architecturall-planning-guide 9/16
8/12/2019 KONE 2009 Architecturall Planning Guide
http://slidepdf.com/reader/full/kone-2009-architecturall-planning-guide 10/16
KONE EcoSystem MRKey Attributes
CAPACITY PIT CLEAR PIT CLEAR PIT CLEAR PIT CLEAR PIT CLEARLBS (KG) DEPTH OVRHD DEPTH OVRHD DEPTH OVRHD DEPTH OVRHD DEPTH OVRHD
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
2000 – – – – – – – – 10'-6" 21'-0"
(907) – – – – – – – – (3200 mm) (6401)
2500-3500 5-'3" 14'-1" 5'-6" 14'-7" 6'-0" 14'-11" 6'-10" 15'-8" 10'-6" 21'-0"
(1134-1588) (1600) (4292) (1676) (4445) (1829) (4547) (2083) (4775) (3200) (6401)
4000 5-'3" 14'-1" 5'-6" 14'-7" 6'-0" 14'-11" 6'-10" 15'-8" – –
(1814) (1600) (4292) (1676) (4445) (1829) (4547) (2083) (4775) – –
4500 5-'3" 14'-7" 5'-6" 15'-1" 6'-0" 15'-5" 6'-10" 16'-2" – –
(2041) (1600) (4445) (1676) (4597) (1829) (4953) (2083) (4928) – –
5000 5-'3" 14'-7" 5'-6" 15'-1" 6'-0" 15'-5" 6'-10" 16'-2" – –
(2268) (1600) (4445) (1676) (4597) (1829) (4953) (2083) (4928) – –
200 FPM 350 FPM 400 FPM 500 FPM 700 FPM (1,2,3)
Notes
(1) For speeds above 700 fpm (3.56 m/s) or travel above 590' (180 m) contact your KONE Sales Professional for design and planning assistance.
(2) For 700 fpm (3.56 m/s) front opening passenger configurations add 2" (51 mm) to the hoistway depth .
(3) Information is based upon chain compensation. For rope compensation applications, please consult your
KONE Sales Professional.(4) All dimensions are based on an 8'-0" (2438 mm) cab with a 7'-0" (2134 mm) door. Alternate car and door
heights are available, but will affect dimension .
(5) If occupied space exists below the hoistway, consult your KONE Sales Professional.
(6) For seismic applications (zone 2 or greater) add 4" (102 mm) for passenger elevators and 3" (76 mm) forservice elevators to hoistway width .
(7) Information is based upon structural machine room floor slabs. For machine beam applications, please consult your KONE Sales Professional.
(8) Machine room height of 8'-0" (2438 mm) is measured from the machine room floor surface to undersideof the lowest obstruction above the machine . Consult your KONE Sales Professional for details.
Visit www.kone.com for the latest job specific details, CAD drawings, specifications, electrical data, reactionloads and building access requirements.
MAX TRAVEL590 ft (180 m)
MAX LANDINGS
63SPEED200, 350, 500, 700 fpm(1.00, 1.78, 2.54, 3.56 m/s)
CAR HEIGHT8, 9 or 10 ft (2438, 2743 or 3048 mm)
ENTRANCE HEIGHT7, 8 or 9 ft (2134, 2438 or 2743 mm)
CLEAR OVERHEAD and PIT DEPTH
H
I
Travel
J
G
GF
S E R V I C E
P A S S E N G E R
F r o n t & R e v e r s e O p e n i n g
F r o n t O p e n i n g
2000 SSP 8'-4" 6'-31 ⁄ 4" 5'-81 ⁄ 2" 4'-31 ⁄ 4" 3'-0"(907) (2540) (1911) (1740) (1302) (914)
2500 SSP-CO 9'-4" 6'-3 1 ⁄ 4" 6'-81 ⁄ 2" 4'-33 ⁄ 4" 3'-6"(1134) (2845) (1911) (2045) (1314) (1067)
3000 SSP-CO 9'-4" 6'-91 ⁄ 4" 6'-81 ⁄ 2" 4'-93 ⁄ 4" 3'-6"(1361) (2845) (2064) (2045 ) (1467) (1067)
3500 SSP-CO 9'-4" 7'-51 ⁄ 4" 6'-81 ⁄ 2" 5'-53 ⁄ 4" 3'-6"(1588) (2845) (2267) (2045) (1670) (1067)
4000 CO 10'-4" 7'-51 ⁄ 4" 7'-8 1 ⁄ 2" 5'-53 ⁄ 4" 4'-0"(1814) (3150) (2267) (2350) (1670) (1219)
4000 2SP 8'-1" 10'-1" 5'-81 ⁄ 2" 7'-61 ⁄ 4" 4'-0"(1814) (2464) (3073) (1740) (2292) (1219)
4500 2SP 8'-1" 10'-7" 5'-81 ⁄ 2" 8'-01 ⁄ 4" 4'-0"(2041) (2464) (3226) (1740) (2445) (1219)
5000 2SP 8'-1" 11'-23 ⁄ 4" 5'-81 ⁄ 2" 8'-63 ⁄ 4" 4'-0"(2268) (2464) (3423) (1740) (2610) (1219)
S E R V I C E
P A S S E N G E R
CAPACITY OPENING HOISTWAY HOISTWAY INTERIOR INTERIOR DOORLBS (KG) TYPE WIDTH (mm) DEPTH (mm) WIDTH (mm) DEPTH (mm) WIDTH (mm)
2000 SSP 7'-4" 6'-10" 5'-8 1 ⁄ 2" 4'-31 ⁄ 4" 3'-0"(907) (2235) (2083) (1740) (1302) (914)
2500 SSP-CO 8'-4" 6'-8" 6'-81 ⁄ 2" 4'-31 ⁄ 4" 3'-6"(1134) (2540) (2032) (2045) (1302) (1067)
3000 SSP-CO 8'-4" 7'-2" 6'-81 ⁄ 2" 4'-91 ⁄ 4" 3'-6"(1361) (2540) (2184) (2045) (1454) (1067)
3500 SSP-CO 8'-4" 7'-10" 6'-81 ⁄ 2" 5'-51 ⁄ 4" 3'-6"(1588) (2540) (2388) (2045) (1657) (1067)
4000 CO 9'-4" 7'-10" 7'-81 ⁄ 2" 5'-51 ⁄ 4" 4'-0"(1814) (2845) (2388) (2350) (1657) (1219)
4000 2SP 8'-1" 9'-2" 5'-81 ⁄ 2" 7'-53 ⁄ 4" 4'-0"(1814) (2464) (2794) (1740) (2780) (1219)
4500 2SP 8'-1" 9'-8" 5'-81 ⁄ 2" 7'-113 ⁄ 4" 4'-0"(2041) (2464) (2946) (1740) (2432) (1219)
5000 2SP 8'-1" 10'-2" 5'-81 ⁄ 2" 8'-63 ⁄ 4" 4'-0"(2268) (2464) (3099) (1740) (2597) (1219)
EcoSystem MR
F
G
J
E
DB
E
C
A
I
A
H
(2)
(6)
(8)
(4)
I
(5)
1.00 m/s 1.78 m/s 2.03 m/s 2.54 m/s 3.56 m/s (1,2,3)
K O N E E c o S p a c e
K O N E M o n o S p a c e
K O
N E E c o S y s t e m M
R
K
O N E A l t a
B
A B C D E
8/12/2019 KONE 2009 Architecturall Planning Guide
http://slidepdf.com/reader/full/kone-2009-architecturall-planning-guide 11/16
KONE AltaKey Attributes
KONE Alta began as a vision, drawing upon our
global resources as the recognized innovators
in the industry, and raised elevator technologyto new heights.
Alta is the ultimate high-performance elevator
system dedicated to the world’s tallest
buildings, offering a unique combination of
intelligence, speed, ride comfort, reliability,
safety, space and energy efficiency. The KONE
Alta blends advanced technology with design
flexibility, backed up by our global project
planning and implementation capabilities.
Alta is performance, finely tuned to enhance
your building.
For more information on Alta,contact KONE Major Projects Unit at
(630) 955-3195(630) 955-3192 (fax)
Hyatt Center
Swiss Re
K O N E E c o S p a c e
K O N E M o n o S p a c e
K O
N E E c o S y s t e m M
R
K
O N E A l t a
Trump Tower
Turning Torso
8/12/2019 KONE 2009 Architecturall Planning Guide
http://slidepdf.com/reader/full/kone-2009-architecturall-planning-guide 12/16
Escalators + Autowalks
Application Heavy traffic
Type Autowalk
Length Per requirements
Nominal
Pallet Width 32", 40", 48", 56"
(800, 1000, 1200,
1400 mm)
Balustrade Glass or solid
Speed 100 or 130 fpm(.50 or .66 m/s)
The KONE Autowalk achieves the
perfect balance between form and
function. An attractive welcome
area invites passengers to take an
uncommonly smooth and quiet ride,
while offering options to meet your
architectural vision.
Application Retail, airports,
stadiums, hotels,
leisure venues
Type Complete escalator
modernization
Nominal
Step Width 24", 32", 40"
(600, 800, 1000 mm)
Balustrade Glass or solid
Speed 100 fpm (.50 m/s)
The KONE EcoMod escalator
modernization solution offers an
innovative and systematic approach
to replacing the entire workings of
your escalators and delivering brand
new ECO3000 technology without
expensive, disruptive truss removal.
KONE EcoMod™KONE Autowalk
For the latest product information and interactive design tools, visit www.kone.com
• Quiet, smooth operation
• Small installation dimensions
• Efficient and economical
• High levels of reliability
• Design options to match the
image of your building
Application Retail, airports,
stadiums, hotels,
leisure venues
Type Escalator
Rise Maximum 49' (15 m)
Nominal
Step Width 24", 32", 40"
(600, 800, 1000 mm)
Balustrade Glass or solid
Speed 100 fpm (.50 m/s)
KONE ECO3000 escalators raise
global standards with innovative
technology, space-savings,
environmentally sound design,
leading-edge style and safe, reliable
performance – all backed by the
experience and expertise of a world
leader in vertical transportation.
KONE also offers transit escalators.
Please contact your local KONE Sales
Representative for more details.
KONE ECO3000®
8/12/2019 KONE 2009 Architecturall Planning Guide
http://slidepdf.com/reader/full/kone-2009-architecturall-planning-guide 13/16
KONE ECO3000 escalators are available in
three step widths, glass or solid balustrades
and many other available options and finishes.
The robust design, coupled with excellencein manufacturing and service, keep KONE at
the top of the list of preferred suppliers of
escalators for airports and lightly used railway
or metro stations, public access, office or
retail applications.
KONE ECO3000
(2286 mm)
(1140 mm)
Notes
(1) Details represent standard KONE escalatorconfigurations. Please consult your SalesProfessional to review all possible deviations.
(2) Please visit kone.com for the latest jobspecific details, electrical data, reaction loads
and building access requirements.
Inclination 30
Level Steps 2 or 3 Level Steps
Radii 3'-33 ⁄ 8" or 4'-11" (1.0 or 1.5 m)Upper Radius
Maximum Vertical Rise 49'-29 ⁄ 16" (15m)
Nominal Step Width 24", 32" and 40"(600, 800, 1000 mm)
Balustrade Glass, Solid Verticalor Solid Inclined
Balustrade Height 3'-33 ⁄ 8" (1000 mm)
Speed 100 fpm (0.5 m/s)
Electrification ANSI
Chain Type Inside Chain Roller
Handrail C or V-type
Environment Indoor, Semi-outdoor or Outdoor
KONE ECO3000 – Basic Data
Detail 1
Detail 2
K O N E E c o 3 0 0 0 ®
K O N E A u t o w a l k
K O N E E c o M o d
NOMINAL STEP WIDTH (A) 24" (600 mm) 32" (800 mm) 40" (1000 mm)
Center to Center o f handrai l (B) 2' -101 ⁄ 8" (867 mm) 3'-57 ⁄ 8" (1064 mm) 4'-111 ⁄ 16" (1262 mm)
F in ished width of escal ator (D) 3 '-111 ⁄ 16" (1195 mm) 4'-67 ⁄ 8" (1394 mm) 5'-211 ⁄ 16" (1592 mm)
Width of pit (C) 4'-11 ⁄ 16" (1246 mm) 4'-87 ⁄ 8" (1445 mm) 5'-45 ⁄ 8" (1641 mm)
Detail 1
M A X . R I S E
E
F
G
L
2-LEVEL STEPS 2-LEVEL STEPS 3-LEVEL STEPS
24" (600) STEP 37'-613 ⁄ 16" (11.45 m) 24" (600) STEP 37'-613 ⁄ 16" (11.45 m) 24" (600) STEP 37'-613 ⁄ 16" (11.45 m)
32" (800) STEP 28'-23 ⁄ 5" (8.6 m) 32" (800) STEP 47'-6" (14.47 m) 32" (800) STEP47'-6" (14.47 m)
40" (1000) STEP23' (7.01 m) 40" (1000) STEP49'-29 ⁄ 16" (15 m) 40" (1000) STEP49'-29 ⁄ 16" (15 m)
NON-SEISMIC SEISMIC NON-SEISMIC SEISMIC NON-SEISMIC SEISMIC(mm) (mm) (mm) (mm) (mm) (mm)
13'-91 ⁄ 16" (4193) 13'-105 ⁄ 8" (4232) 13' -91 ⁄ 16" (4193) 13'-105 ⁄ 8" (4232) 15'-13 ⁄ 16" (4593) 15'-23 ⁄ 8" (4632)
8'-13 ⁄ 16" (2469) 8'-23 ⁄ 4" (2508) 8'-61 ⁄ 2" (2604) 8'-81 ⁄ 16" (2643) 9'-101 ⁄ 4" (3004) 9'-1113 ⁄ 16" (3043)
7'-23 ⁄ 8" (2194) 7'-315 ⁄ 16" (2234) 7'-23 ⁄ 8" (2194) 7'-315 ⁄ 16" 2234) 8'-61 ⁄ 8" (2594) 8'-711 ⁄ 16" (2634)
A+15'-39 ⁄ 16" (4663) A+15'-611 ⁄ 16" (4742) A+15'-813 ⁄ 16" (4796) A+16' (4877) A+18' -43 ⁄ 8" (5598) A+18'-71 ⁄ 2" (5677)
Detail 2
3'-31 ⁄ 3" (1.0 m) upper radius 4'-11" (1.5 m) upper radius 4'-11" (1.5 m) upper radius
8/12/2019 KONE 2009 Architecturall Planning Guide
http://slidepdf.com/reader/full/kone-2009-architecturall-planning-guide 14/16
(5740 mm) (5740 mm)(381 mm)
(914 mm)
(1059 mm)
KONE AutowalkStanchion
Inclination 0 deg – 3 deg at ends
for no wellway applications
Nominal Pallet Width 32", 40", 48" and 56"
(800, 1000, 1200 and 1400)
Balustrade Glass or Solid Vertical Panels
Balustrade Height 2'-103 ⁄ 16" (868 mm)
Speed 100 fpm (0.5 m/s)
or 130 fpm (0.65 m/s)
Electrification ANSI
Chain Type Rollers outside chain links
Handrail V-type
Environment Indoor, Semi-outdoor or Outdoor
KONE Autowalk – Stanchion Basic Data
32" (800) 4'-111 ⁄ 8" (1052) 5'-11 ⁄ 8" (1553)
40" (1000) 5'-615 ⁄ 16" (1700) 5'-815 ⁄ 16" (1751)
48" (1200) 6'-23 ⁄ 4" (1899) 6'-43 ⁄ 4" (1950)
56" (1400) 6'-101 ⁄ 2" (2096) 7'-01 ⁄ 2" (2146)
KONE Autowalk – Stanchion StyleBasic Data
NOMINAL PALLET WIDTH (A) (mm)
ROUGH OPENING (C)(mm)FINISHED WIDTH (B)(mm)
Notes
(1) Details represent standard KONE escalatorconfigurations. Please consult your SalesProfessional to review all possible deviations.
(2) Please visit kone.com for the latest jobspecific details, electrical data, reactionloads and building access requirements.
K O N E E c o 3 0 0 0 ®
K O N E A u t o w a l k
K O N E E c o M o d
KONE Autowalks have been installed in all
types of applications. Exposition centers,
stadiums, auditoriums and airports are only
a few of the many applications where
autowalks can move high numbers of people
smoothly and efficiently. High profile projects
include: The Denver International Airport,
Miami International Airport, Atlanta
International Airport and Dallas-Fort Worth
International Airport, to name a few.
8/12/2019 KONE 2009 Architecturall Planning Guide
http://slidepdf.com/reader/full/kone-2009-architecturall-planning-guide 15/16
K O N E E c o 3 0 0 0 ®
K O N E A u t o w a l k
K O N E E c o M o d
KONE EcoModFull Escalator Modernization
KONE is the only company that can offer full escalator
modernization without removing the existing truss.
With KONE EcoMod you do not need to demolish floors, roofs and building facades, and you can
maintain the existing appearance of the building.
During modernization we can keep the people flow
running non-stop.
KONE EcoMod is a complete modernization solution
that gives you brand new escalator technology
without the expense and disruption of removing the
old truss. It can be used to modernize both KONE
escalators and equipment from other manufacturers.
Benefits of having the latest escalator technology• Improved equipment reliability and performance
• Enhanced safety and reliability
• Energy-efficient technology and reduced
operating costs
• Improved user experience with smoother rides
• Installation without major disruption to
passenger flow
• Increased building value
For additional information please contact your
KONE Sales Representative.
Logistically Easier to Install
A KONE EcoMod complete escalator modernization begins with the removal of all existing mechanical and electrical components. Then the existing truss is modified to accept KONE EcoMod modules. This allows quick installationof the latest technology without major disruption.
upper module1
incline modules2
lower module3
New Installation
• Remove cladding and adjacent walls
• Remove sprinklers and water lines
• Remove all electrical
• Remove concrete and tile surrounding access covers
• Remove structural ties to truss and ceiling grids
• Remove ventilation and ducts
• Prepare site for access and weight of escalators
• Provide new disconnects, pit lights and outlets
EcoMod Installation
• Access to the site must be available
• Working and storage areas stay clean, dry and
protected from the weather
• Maintain existing permanent three-phase and
single-phase power for escalator assembly and testing
• Provide new exterior truss cladding
• Provide structural modifications to wellways, if necessary
• Provide shoring for hoisting and removal of existing truss
• Provide access/egress to and from building
• Furnish and install fill and finish flooring
Note: For a full list of “Work by Others” for new installation please contact
a KONE Sales Professional.
Minimized “Work by Others”
8/12/2019 KONE 2009 Architecturall Planning Guide
http://slidepdf.com/reader/full/kone-2009-architecturall-planning-guide 16/16
©2008 KONE Inc.SF2816 Rev0208Printed in U.S.A.
KONE Inc. reserves the right to alter design and specifications without prior notice.
KONE ECO3000, EcoDisc, The heart of your building and MonoSpace are Registered Trademarks of KONE Inc.
KONE Alta, EcoSpace, EcoSystem MR and Silent Car are Trademarks of KONE Inc.
U.S. Operations Center
One KONE CourtMoline, Illinois 612651-800-956-KONE (5663)
Canadian Operations Center
80 Horner AvenueToronto, Ontario M8Z 4X81-416-252-6151
KONE Mexico, S.A. de C.V.
Clavel 227Colonia AtlampaMexico City, D.F. 06450+52.55.1946.0100
For the latest product information
and interactive design tools, visitwww.kone.com
AlabamaBirmingham 205-833-1491Mobile 251-661-7522
ArizonaPhoenix 602-269-7877
ArkansasLittle Rock 501-758-1889
CaliforniaLos Angeles 562-921-1555Sacramento 916-372-1458San Diego 858-679-2400San Francisco 510-351-5141Santa Barbara 805-349-1013
ColoradoDenver 303-792-3423
ConnecticutHartford 860-257-9277
Delaware 856-251-1555
District of Columbia Washington, DC 301-459-8660
FloridaJacksonville 904-292-0225Miami 954-437-4300Naples 239-598-9310Orlando 407-812-8033Tampa 813-635-0330
Georgia Atlanta 770-427-3373
HawaiiHonolulu 808-845-3291
Idaho 801-977-1144
IllinoisChicago 630-629-3100Peoria 309-697-9011Quad Cities 309-797-3232Rockford 815-874-1502
IndianaFort Wayne 260-484-9586Indianapolis 317-788-0061
IowaDes Moines 515-243-0109Quad Cities 309-797-3232
Kansas Wichita 316-942-1201
KentuckyLouisville 502-491-0565
LouisianaBaton Rouge 225-291-5270New Orleans 504-736-0776
Maine 781-828-6355
Maryland
Baltimore 410-766-2100MassachusettsBoston 781-828-6355
MichiganDetroit 734-513-6944Grand Rapids 616-534-3300
MinnesotaMinneapolis 651-452-8062
MississippiJackson 601-939-7597
MissouriKansas City 816-531-2140St. Louis 314-521-8800Springfield 417-862-1174
MontanaMissoula 406-543-6382
NebraskaOmaha 402-592-7381
NevadaLas Vegas 702-269-0919
New Hampshire 781-828-6355
New JerseyHigh Bridge 908-638-6881
New Mexico Albuquerque 505-888-0626
New York Albany 518-464-0002New York City 718-361-7200
North CarolinaCharlotte 704-597-0430
North Dakota 402-592-7381
OhioCincinnati 513-755-6195Cleveland 440-546-1100Columbus 614-866-1751
OklahomaOklahoma City 405-682-5651Tulsa 918-584-0323
OregonPortland 503-652-1011
PennsylvaniaHarrisburg 717-653-7177Philadelphia 856-251-1555Pittsburg 412-279-1561
Rhode Island 781-828-6355
South Carolina 704-597-0430
South DakotaSioux Falls 605-336-1578
TennesseeKnoxville 865-938-3444Memphis 901-758-8320Nashville 615-360-7013
Texas Austin 512-443-0967Dallas 469-549-0581Houston 281-442-6619San Antonio 210-491-0485
UtahSalt Lake City 801-977-1144
Vermont 781-828-6355
VirginiaRichmond 804-328-1032
WashingtonSeattle 425-861-9696
West Virginia 502-491-0565
WisconsinMilwaukee 262-373-0460
Wyoming 303-792-3423
AlbertaCalgary 403-275-5650Edmonton 780-452-9227
British Columbia Vancouver 604-434-0641 Victoria 250-384-0613Kelowna 250-491-1838
Manitoba Winnipeg 204-895-2942
Nova ScotiaHalifax 902-450-1102
OntarioHamilton 905-648-3188Kingston 613-531-6262Ottawa 613-225-8222Toronto 416-252-6151
QuebecMontreal 514-284-2025Quebec City 418-877-1494Sherbrooke 819-821-2182
U.S. Offices
Canada Offices
FPO2StoneSans 6 pt type, 7.5 leading
FPO2StoneSans 6 pt type,
7 leading
This document is printed on recycled
stock containing 30% post-consumer
waste and soy-based inks.
©2008 KONE Inc.SF2861 Rev1208Printed in U.S.A.
KONE Inc. reserves the right to alter design and specifications without prior notice.
KONE, ECO3000, EcoDisc and MonoSpace are registered trademarks of KONE Inc.
Alta, Dedicated to People Fl ow, Eco-efficient, EcoMod, EcoSpace, EcoSpace EB, EcoSystem MR and Silent Car are Trademarks of KONE Inc.“USGBC” and related logo is a trademark owned by the U.S. Green Building Council and is used by permission.