kombitron

technical data

Measures and datasee SprayTron catalogue

KombiTron fits in any body shop, from the most traditional ones to those aiming to fully reorganise work flow. When equipped with a Symach robot, two painters can perform up to 16 complete jobs seamlessly and quickly.

Measures and dataKombiTron code:Outside length:Inside length:Extra length for US market: Outside width:Inside width:Outside height:Inside height:Weight:Time for installation:Warranty:

Air unitExhaust duct flange:Inlet duct flange:Max flow rate:Motor power supply:Motor rated power:Inverter:Manifold:

Filter area inletPrefilter efficiency rating:

22708,80 mt8,00 mt

+1 mt = 9,00 mt4,10 mt4,00 mt3,40 mt2,70 mt1500 kg

h 9612 months

400 x 600 mm400 x 600 mm8000 cu.m./h

400 V~ - 230 V~/60 Hz

2 kW2 kW

0,6 x 0,4 mt

M5

28.8 ft26.2 ft

+3.2 ft = 29.5 ft13.4 ft13.1 lb11.1 ft

8.8 ft3306 lb

15.7”x23.6”15.7”x23.6”

1.9 x 1.3 ft

Floor specificationsSteel engraved:Carmover rails:

1000 x 1000 mtpz. 5x 4,00 mt

3280.8 ftpz.5 x 13.1 ft

Pneumatic side door polycarbonateSide door width:Side door height useful:Open side door height:Polycarbonate pane thick:Withstand temperature up to:Rating fire:

Optional emergency door:

Pneumatic side door aluminumSide door width:Side door height useful:Open side door height:Optional emergency door:

Control boxInstalled power:Supply voltage:Frequency:Controls voltage:

LightsInstalled power:Chromatic yield index:Light flow of lamp:Supply voltage:Colour type:No. of Powerlux:Estimated life:Frequency:Colour temperature:Mean lighting:

5,80 mt2,10 mt4,46 mt40 mm100°C

class Baccording to EN 13501-1:2002

0,90 x h 2,00 mt

5,80 mt2,10 mt4,46 mt

0,90 x h 2,00 mt

3 Kw400 V~ - 230 V~

50/60 Hz24 V~

0,216 kW0,93 Ra

EL 35°C 4300 Lm230 V~

daylight colour 2 x (6 neon)

24000 hours50/60 Hz

5200°K1000 Lux

19 ft6.8 ft

14.6 ft1.5”

2.9 x h 6.5 ft

19 ft6.8 ft

14.6 ft2.9 x h 6.5 ft

Side DoorThe side door features an anticorrosion treated steel perimeter frame with a single translucent cellular polycarbonate pane. The single module door has no rolling systems that may collect dust or dirt build-up. The pneumatic opening system is controlled by two switches (one inside and one outside the booth). Pressurisation is ensured by a seal that runs along the whole door perimeter.

CovertopThe outer covering of the KombiTron is made of “Covertop” moulded ABS panels secured to the structure with suit-able plastic clips that can be opened and closed allowing users to implement the electrical or pneumatic systems as needed.The Covertop panel comes in six different colours that can be combined at will.Symach focused on innovating the external design of the KombiTron compared to traditional booths, so as to offer customers a customisable, functional, effective product with minimalist design lines, easy to install and replace.

Approval and QualityApproval: EU: CE

Au: Compliant to Australian safety standardsAS/NZS 4114.1:2003 – AS 3814.1:2009

US: cETLus Listed - Intertek 5000803

LOOK AT THE FUTURE

Alarm management

Drying

Safety devices

Gas delivery only during operation

Gas nc solenoid valves

Thermostat monitors plenum filter temperature

Control hardware and software

Safety flow switch checks for proper fan operation

The software controls all alarm devices monitoring their efficiency at all times and alerts operator to abnormal events through a warning light and acoustic warning. Alarms includes an alert in the event of unauthorised access to the booth during drying. The software also constantly monitors filter clogging and alerts operator to the need for filter change at each power-on.

The drying phase is performed by the Robodry or Easydry robot.

This booth is AT EX certified, which means it has been designed to operate in environments where potentially explo-sive gas mixtures can develop as solvents are released by paint products.This certification guarantees that the product and its components are designed and manufactured to operate safely in this kind of environment.

Gas delivery to Solarys is always cut off outside the booth, meaning that gas is only delivered when the booth is actu-ally operating and all safety systems are active.

The gas control panel outside the booth features redundant safety, with a first NC (normally-closed) main solenoid valve and an additional NC solenoid valve that are only activated when the booth is operating.

A thermostat is installed inside the furnace to check for proper internal temperature.

Hardware and software monitoring ensures proper operation of each and every component.

A thermostat is installed inside the furnace to check for proper internal temperature.

software

safety devices

Symach srl - Via Cassoletta, 41/A Crespellano 40056 - Bologna - Italy

www.symach.cominfo@symach.com

Ph. +39 (0)51 963161