KOMATSU · 2021. 6. 10. · HD785-7 9 passes 6 passes 3 passes 5 passes 4 passes 4 passes 7 passes...
Transcript of KOMATSU · 2021. 6. 10. · HD785-7 9 passes 6 passes 3 passes 5 passes 4 passes 4 passes 7 passes...
TOGETHER WE INNOVATE
2021KOMATSUPRODUCT RANGE - SOUTHERN AFRICA
PAGE
89
10
1112-13
1415
1617
18
1920
21
22
23
DOZERSTrack Dozers: Small - Medium (9t - 40t) Track Dozers: Large (51t - 113t) Wheel Dozers: (48t - 100t)
EXCAVATORSHydraulic Excavators: Mini (5.8t - 8.2t) Hydraulic Excavators: Medium (12t - 49.4t) Hydraulic Excavators: Large (59t - 200t) Hydraulic Excavators: Ultra (200t - 800t)
WHEEL LOADERSWheel Loaders: Medium (7.4t - 24.9t) Wheel Loaders: Large (33.3t - 218t)
MOTOR GRADERS
DUMP TRUCKSArticulated Dump Trucks (ADT) Rigid Dump Trucks (RDT)
BACKHOE LOADER
SKID STEERWheeled Skid Steer
MOBILE CRUSHERS
DEALERSHIP:
KOMATSU PRODUCT RANGESouthern Africa 2020Komatsu Africa Holdings (Pty) Ltd
17 Brickfield Road, Sunnyrock, Germiston, 1401, South AfricaTel: +27 11 923 1000 I Fax: +27 11 923 1111Customer Care Line: 087 945 1000 I Email: [email protected]
ZIMBABWE:Mojo Motor Industries (Pvt) Ltd6 Dagenham Road, Willowvale, Harare, Zimbabwe Goliath Gwese: Tel: +263 77 718 5090Email:[email protected]
(ZIMBABWE) SOUTH AFRICAN OFFICE:134 Kuschke Street, Germiston, Gauteng, South Africa Karyn Knuyt: Tel: +27 10 215 0153Email: [email protected]
Page 5Page 4 The heaped capacity is rated at 2:1 SAE
PC40
0-8
PC45
0LC-
8W
A430
-6PC
600-
8R1
SEW
A480
-6W
A500
-6R
PC85
0-8R
1W
A600
-6R
41.7t1.9m3
(SAE heaped)
44.4t2.1m3
(SAE heaped)
18.3t3.1m3
(SAE heaped)
59.2t3.5m3
(SAE heaped)
25.2t4.3m3
(SAE heaped)
33.4t5.2m3
(SAE heaped)
78.6t4.5m3
(SAE heaped)
52.7t6.4m3
(SAE heaped)
Note: The above is based on SG of 1.8 t/m3 and a bucket fill factor of 95%
12 passes
11 passes
7 passes
7 passes
6 passes
5 passes
6 passes
4 passes
6 passes
6 passes
4 passes 6 passes
HM40
0-3R
HD32
5-7R
HD46
5-7R
Payload: 40tCapacity: 24m3
Max. GVW: 74t
Payload: 36.5tCapacity: 24m3
Max. GVW: 69.2t
Payload: 55tCapacity: 34.2m3
Max. GVW: 99.6t
9 passes
8 passes
5 passes
5 passes
4 passes
4 passes
4 passes
3 passes
HM30
0-2R
Payload: 27.3tCapacity: 16.6m3
Max. GVW: 51.4t
MEDIUM SIZE WHEEL LOADER, EXCAVATOR, SHOVEL & TRUCK MATCHING
Page 7Page 6
WA1
200-
6
216t20.0m3
(SAE heaped)
6 passes
5 passes
3 passes
HD78
5-7
9 passes
6 passes
3 passes
5 passes
4 passes
4 passes
7 passes
6 passes
4 passes
3 passes
6 passes
7 passes
5 passes
4 passes
Payload: 91tCapacity: 60m3
Max. GVW: 166t
Payload: 142tCapacity: 78m3
Max. GVW: 249.5tHD15
00-8
Payload: 181tCapacity: 111m3
Max. GVW: 328.4t730E
-8
PC12
50-8
R
106.5t6.7m3
(SAE heaped)
WA8
00-3
EO
101.9t11.0m3
(SAE heaped)
PC20
00-8
200t12m3
(SAE 2:1 heaped)
PC30
00-6
250t15m3
(SAE 2:1 heaped)
PC40
00-1
1
398t22m3
(SAE 2:1 heaped)
PC55
00-6
533t29m3
(SAE 2:1 heaped)
PC80
00-6
752t42m3
(SAE 2:1 heaped)
3 passes
7 passes
5 passes
3 passes 4 passes 5 passes
Payload: 221.6tCapacity: 147m3
Max. GVW: 385.8t830E
-AC
Payload: 254tCapacity: 169m3
Max. GVW: 454.3t860E
-1K
Payload: 292tCapacity: 211m3
Max. GVW: 501.9t930E
-4
Payload: 327tCapacity: 214m3
Max. GVW: 576t
LARGE SIZE WHEEL LOADER, EXCAVATOR, SHOVEL & TRUCK MATCHING
Payload: 369tCapacity: 36m3
Max. GVW: 625t980E
-4
PC70
00-1
1
676t36m3
(SAE 2:1 heaped)
960E
-2K
Note: The above is based on SG of 1.8 t/m3 and a bucket fill factor of 95% The heaped capacity is rated at 2:1 SAE
4 passes3 passes 4 passes 5 passes
Page 9Page 8
TRACK DOZERS: “large size” product range (50t to 113t)MODEL: D275AX-5EO D375A-6 D475A-5EO D475ASD-5EO
ENGINE: MakeModel
ENGINE NET POWER: (SAE J1349/DIN 6270) @BLADE:
Capacity Width Height
DIMENSIONS:Height Width (Blade) Length (without ripper)
OPERATING WEIGHT: IncludingATTACHMENTS:
Grouser Shoe Width Spec. Catalog No.
kW rpm
m3 mm mm
mm mm mm kg
Blade Ripper Cab
ROPS mm
Komatsu SAA6D140E-5
335 2 000
14.6 4 440 1 960
3 990 2 260 8 995
51 530
SUTGiant Single Shank
Steel Cab ROPS 610
CEN00098-03
Komatsu SAA6D170E-5
455 1 800
18.5 4 775 2 265
4 285 2 500
10 485 71 640
SU/DT(Str) Giant Single Shank
Steel Cab ROPS 610
CEN00392-00
Komatsu SAA12V140E-3
664 2 000
27.2 5 265 2 690
4 646 2 770
11 565 108 400
SU/DT(Str) Giant Single Shank
Steel Cab ROPS 710
CEN00075-02
KomatsuSAA12V140E-3
6642 000
456 4652 690
4 6462 770
10 525113 200
SD/DT(Str)*Counterweight
Steel CabROPS810
CEN00124-01
PAT: Power Angle Tilt SUT: Semi-U Tilt ST: Straight Tilt U/DT: U-Dozer-DualTilt Str: Strengthened Blade (liner)Note (a): Panafrican Group Model excluding blade and trunnion
TRACK DOZERS: “small to medium size” product range (9t to 40t)MODEL: D39EX-22 D51EX-22 D61EX-23M0 D65EX-16 D85EX-15R D155AX-6
ENGINE: MakeModel
ENGINE NET POWER: (SAE J1349/DIN 6270)@ BLADE:
Capacity Width Height
DIMENSIONS:Height Width (Blade) Length (without Ripper)
OPERATING WEIGHT: Including
ATTACHMENTS:
Grouser Shoe Width Spec. Catalog No.
kW rpm
m3 mm mm
mm mm mm kg
Blade Ripper
Cab ROPS mm
Komatsu SAA4D107E-1
79 2 200
2.2 2 710 980
2 835 2 710 4 3359 040
PAT Multi Shank
ROPS Cab -
400 CEN 00321-01
Komatsu SAA6D107E-1
97 2 200
2.7 3 045 1 110
3 177 3 045 4 800
13 220
PAT Multi Shank
ROPS Cab -
510 AESS745-02
Komatsu SAA6D107E-1
125 2 200
3.4 3 250 1 195
3 180 3 250 5 480
19 610
PAT Multi Shank
Steel Cab ROPS 600
EENSS20030
Komatsu SAA6D114E-3
153 1 950
5.61 3 545 1 425
3 220 3 5455 490
19 510
SUTMulti Shank
Steel Cab ROPS 510
CEN00373-02
Komatsu SA6D125E-3
197 1 900
73 635 1 580
3 324 3 635 5 795
28 060
SUTMulti Shank
Steel Cab ROPS 560
CEN00192-04
KomatsuSAA6D140E-5
2641 900
9.44 0601 850
3 3954 0608 225
39 500
SIGMA (Str)Giant Single Shank
ROPS Cab-
610CEN00103-02
PAT: Power Angle Tilt SUT: Semi-U Tilt ST: Straight Tilt U/DT: U-Dozer-DualTilt Str: Strengthened Blade (liner)Note (a): Panafrican Group Model excluding blade and trunnion
Page 10Page 11
WHEEL DOZERS: product range (48t to 100t)MODEL: WD600-6 WD900-3A
ENGINE:Make Model
ENGINE NET POWER: (SAE J1349/DIN 6270) @ BLADE:
Type* Capacity Width Height
TURNING RADIUS: (at outside corner of blade)DIMENSIONS:
Height Width (Blade) Length (incl. Blade)
OPERATING WEIGHT: Including ATTACHMENTS:
Cab ROPS
TYRES: Front & Rear Spec. Catalog No.
kW rpm
m3 mm mm mm
mm mm mm kg
KomatsuSAA6D170E-5
3931 800
Straight8.0
5 1001 4707 075
4 4605 1009 930
48 100
ROPS/FOPS Cab-
35/65-33 24PRCEN00367-00
KomatsuSAA12V140E-3
6372 000
Semi-U26.0
6 4702 1609 200
5 2156 470
12 035100 000
Steel CabROPS
45/65 R45 (L4)HESS5990
HYDRAULIC EXCAVATORS: “mini size” product range (5.8t to 8.2t)MODEL: PC55MR-3 PC70-8 PC88MR-8
OPERATING WEIGHT: (ISO 6016)With tiltable cab and rubber shoes With cab and steel shoes
ENGINE: Make Model Net Power (SAE J1349)
HYDRAULIC SYSTEM: Type PERFORMANCE:
Bucket Max. Digging Force (ISO 6015) Gradeability Arm Crowd Force (Max) (ISO 6015)Standard Arm (stick)
BUCKET: Capacity (SAE heaped) Bucket RangeWidth (inc. side cutters) Max. Digging Depth (with std arm)
TRANSMISSION: Type Max. Drawbar Pull Max travel speed (2 speed)
BLADE: Width x HeightATTACHMENTS:
Operator’s Cab - ROPS & Top Guard (std) Standard Arm (stick) length Long Arm (stick) - Optional Boom length (std) Grouser Shoe Width (std) - steel shoes
Spec. Catalog No.
kgkg
kW@rpm
kgdeg.
kgm3
m3
mmmm
kgkm/hmm
Bucket
mmmmmmmm
5 8205 345
Komatsu4D88E-6
28.5@2 400CLSS
3 98030
2 4400.16
(0.055-0.16)580 (650)
3 8002 Speed Hydrostatic
4 2802.8/4.6
1 960x355GP*Yes
1 6402 0002 900400
CEN00374-02
-6 590
KomatsuSAA4D95LE-548.5@1 950
CLSS
5 59030
3 9000.3
(0.3-0.39)655 (750)
4 1002 Speed Hydrostatic
5 7502.8/4.5
2 260x470GP*Yes
1 650
3710450
CEN00471-03
-8 225
KomatsuSAA4D95LE-5
49@1 950CLSS
625030
4 2300.28
(0.9-0.09-0.34)650 (750)
4 1602 Speed Hydrostatic
6 8202.9/5.1
2 330x470GP*Yes
1 650
3405450
CEN00322-02
*GP: General Purpose bucket.
Page 12Page 13
HYDRAULIC EXCAVATORS: “medium size” product range (12t to 49.4t)MODEL: PC270-8 PC300-8MO PC350LC-8M0 SE PC400-8 PC450LC-8 PC500LC-10R
ENGINE NET POWER:(SAE J1349/DIN 6270) @
BUCKET:Capacity - (Std SAE heaped) Bucket Range Bucket Digging Force:at Power Max (SAE)Arm Crowd Force SAE (Max)Digging Depth
DIMENSIONS:Height (to top of boom) Width (overall)Length (transport position)
OPERATING WEIGHT: ATTACHMENTS:
Stick (arm) LengthBoom LengthGrouser Shoe Width
Spec. Catalog No.
kWrpm
m3
m3
kgf/kNkgf/kN
mm
mmmmmmkg
(m3)Bucketmmmmmm
1402 050
1.35*HD(1.2-1.9)
17 900/17616 800/165
5 725
3 3103 1909 940
27 140(1.35)HD
2 5005 900600
CEN00349-03
1871 950
1.5*HD(0.52-1.80)
23 300/22822 900/225
6 400
3 4803 190
11 14031 100(1.5)HD2 2006 470600
CEN00535-03
1871 950
1.9*Me(1.5-2)
20 400/20022 900/225
6 400
3 2853 190
11 14034 000(1.7)HD2 5506 000600
CHE 201504
2571 900
1.9*HD(1.8-2.3)
24 600/24124 600/241
6 845
3 8503 430
11 90541 700(1.9)HD2 4007 060600
CEN00223-02
2571 900
2.1*HD(1.30-2.80)
24 600/24126 600/260
6 740
3 6603 430
12 04044 400(2.1)HD
3 380 (note3)
7 060600
CEN00226-07
2691 900
2.1*HD(2.5-4.0)
27 200/26723 300/228
7 695
3 9903 580
12 26049 400(2.1)HD
3 380 (note3)
7 060600
CEN00845-01
*HD: Heavy Duty Bucket (Standard) – Based on material density of 1.80 t/m3 and a bucket fill factor of 100%.Note 1: Currently this unit is supplied with a 2.50m dipper arm as standard.Note 2: Currently this unit is supplied with a 2.90m dipper arm as standard.Note 3: Currently this unit is supplied with a 3.38m dipper arm as standard.
HYDRAULIC EXCAVATORS: “medium size” product range (12t to 49.4t)MODEL: PC130-8 PC138US -8 PC210-10MO PC220-8
ENGINE NET POWER:(SAE J1349/DIN 6270) @
BUCKET:Capacity - (Std SAE heaped) Bucket Range Bucket Digging Force:at Power Max (SAE)Arm Crowd Force SAE (Max)Digging Depth
DIMENSIONS:Height (to top of boom) Width (overall)Length (transport position)
OPERATING WEIGHT: ATTACHMENTS:
Stick (arm) LengthBoom LengthGrouser Shoe Width
Spec. Catalog No.
kWrpm
m3
m3
kgf/kNkgf/kN
mm
mmmmmmkg
(m3)Bucketmmmmmm
682 200
0.4*HD(0.18-0.6)
8 250/816 880/67.5
5 520
2 8752 4907 590
12 380(0.4)HD
2 500 (note 1)
4 600500
CEN00292-03
68.42 200
0.5*GP(0.18-0.60)
8 300/81.46 200/60.8
5 480
2 8502 4907 260
13 480(0.5)GP2 5004 600500
CEN00183-06
1232 000
1*HD(0.80-1.20)
16 000/15714 200/139
5 230
2 9752 8006 255
21 300(1)HD2 9255 700600
CEN00820-01
1252 000
1.2*HD(1-1.3)
17 900/17615 800/155
5 825
3 2202 9809 865
22 900(1.2)HD2 0005 850600
CEN00065-08
*HD: Heavy Duty Bucket (Standard) – Based on material density of 1.80 t/m3 and a bucket fill factor of 100%.Note 1: Currently this unit is supplied with a 2.5m dipper arm as standard.Note 2: Currently this unit is supplied with a 2.9m dipper arm as standard.Note 3: Currently this unit is supplied with a 3.38m dipper arm as standard.
Page 14Page 15
HYDRAULIC EXCAVATORS: “large size” product range (59t to 200t)MODEL: PC600-8R1 SE PC700LC-8R SE PC850-8R1 PC1250-8R PC2000-8
ENGINE NET POWER:(SAE J1349/DIN 6270) @BUCKET:
Capacity - (Std SAE heaped) Bucket Range Bucket Digging Forceat Power Max (SAE)Arm Crowd Force SAE (Max)Digging Depth
DIMENSIONS:Height (to top of boom) Width (overall)Length (transport position)
OPERATING WEIGHT: ATTACHMENTS:
Stick (Arm) LengthBoom LengthGrouser Shoe Width
Spec. Catalog No.
kWrpm
m3
m3
kgf/kNkgf/kNkgf/kN
mm
mmmmmmkg
(m3)Bucketmmmmmm
3201 800
3.5*HD(3-3.9)
29 500/28931 770/31226 500/260
7 060
4 6003 900
11 93059 200(3.5)HD2 9006 600600
CEN00426-01
3201 800
4.0*HD(3.5-4)
29 500/28931 770/31226 500/260
6 910
4 6704 290
11 99067 000(4.0)HD2 9006 600610
CEN00424-01
3631 800
4.5*HD(4-4.5)
39 900/391-
33 800/3317 130
4 6154 110
13 13078 600(4.5)HD2 9007 100610
CEN000173
5021 800
6.7*HD(5-6.7)
51 200/502-
40 300/3957 900
6 2654 965
14 790110 900(6.7)HD3 4007 800700
CEN00176-07
7131 800
12.0*HD(12-13.7)
63 800/626-
58 500/5749 235
7 1357 860
17 030200 000(12)HD3 9008 700810
CEN00130-04
*HD: Heavy Duty Bucket (Standard) - Based on material density of 1.8t/m3 and bucket fill factor of 100%.Configuration available in Face Shovel (FS) and Backhoe (BH).
Note: Standard Bucket Size Based on 1.8t/m3.FS: Face ShovelBH: Backhoe
42
42
1.1
2 000
-
1 800
8 000
11 200
763 000
5 500
11 500
42
28-42
2.1
2 320
2 320
-
3 000
13 900
752 000
5 750
8 150
11
12-13.7
1.1
721
755
-
3 190
9 665
195 000
4 450
5 950
12
11
2.1
626
-
574
9 235
8 650
200 000
3 900
8 700
15
12-16.5
1.1
850
-
800
7 900
9 000
252 000
4 000
8 600
16
12-16
2.1
1 000
1 100
-
3 300
10 200
250 000
4 300
6 000
22
19-23
1.1
1 155
-
1 050
8 000
9 700
404 000
4 900
9 750
22
19-24
2.1
1 250
1 330
-
2 900
12 000
398 000
4 500
7 150
29
26.29
-
1 450
-
1 290
8 300
10 100
538 000
5 100
11 000
29
21.29
2.1
1 865
1 870
-
2 700
13 300
533 000
5 600
7 600
36
1.1
1 692
-
1 499
8 340
10 860
682 000
5 100
11 000
36
2.1
2 086
2 147
-
2 970
13 760
673 000
5 500
8 000
HYDRAULIC EXCAVATORS - shovel/backhoe: “ultra size” product range (200t to 800t)MODEL: PC2000-8
FS BHPC3000-6BH FS
PC4000-11 FSBH FS
PC5500-6BH FS
PC7000-11BH FS
PC8000-6BH FS
DIESEL ENGINE VERSION:Net Power (SAE J1349) Make:Model:
Version 1 - Tier 1Version 2 - Tier 2
ELECTRIC DRIVE VERSION:@ 60Hz (Optional) @ 50Hz (Standard)
BUCKET: Capacity SAE (heaped)std Bucket Capacity Range
Digging/Break-out: (SAE) Arm Crowd Force: (SAE) Arm Tear-Out Force: Max. Digging Depth: Max. Dumping Height:
OPERATING WEIGHT: ATTACHMENTS:
Stick length Boom length
Spec. Catalog No.
kW@rpm
kWr/minr/min
m3
m3
slopeKnKnKnmmmmkg
mmmm
713@1 800Komatsu
SAA12V140E-3
N/AN/AN/A
CEN00130-04
940@1 800 Komatsu
SSA12V159SDA12V159E-2
9001 8001 500
QESS0037-02
1 400@1800 Komatsu
SDA16V160SDA16V160E-2
1 3501 8001 500
QESS0047-02
940x2@1 800 Komatsu
SDA12V159E-22 x 9001 8001 500
QESS0556-06
2x1250@1800Komatsu
SSDA16V159E-2
2 X 1 20015001800
1 500x2@1800 Komatsu
SDA16V160E-22 x 1 450
1 8001 500
QESS0087-02
Page 17Page 16
*GP: General Purpose (Stockpile) bucket with teeth *SNR: Spade Nose Rock bucket with teeth. *Granite: Granite handling attachment as required.Note: (a) GP (Std) buckets are all based on SG of 1.7t/m3 and a bucket fill factor of 100%.
(b) SNR (Std) buckets are all based on SG of 1.8t/m3 and a bucket fill factor of 100%.H/L: High Lifting available.
WHEEL LOADERS: “large size” product range (33.3t to 218t)MODEL: WA500-6R WA600-6R WA800-3E0 WA1200-6 WA1200-6H/L
ENGINE NET POWER:(SAE J1349/ISO 9249) @
BUCKET:Capacity - (Std SAE heaped) Bucket Range Breakout Force Static Tipping Load: (Straight) Static Tipping Load: (Full turn) Dumping Clearance (max. height at 45°)
DIMENSIONS:Height (to top of cab) Width (with bucket)Length (incl. bucket)
OPERATING WEIGHT: Includes the following
ATTACHMENTS:
Spec. Catalog No.
kWrpm
m3
m3
kgfkgkgmm
mmmmmmkg
(m3) BucketTyres
(rating)
2631 900
5.2(4.3-5.6)25 00024 30021 0003 295
3 7853 190(c)9 815
33 360
(5.3)/SNR29.5-2522PR(L3)
CEN00253-02
3931 800
6.4(6.4-7)39 50034 20028 5003 995
4 4603 685
11 98552 700
-35/65-3336PR(L4)
CEN00209-01
6032 000
11.0*SNR(10.0-14.0)
69 00061 09053 7404 630
5 2754 810
13 960101 900
(11)/SNR45/65-4538PR(L5)
CEN00187-02
1 3161 800
20.0*SNR(18.0-35.0)130 000121 930107 060
6 285
6 8656 400
18 200216 400
(20)/SNR55.5/80-5768PR(L5)
CEN00419-01
1 3161 800
18*SNR(18)
126 000106 80093 5007 005
6 8656 400
18 840218 300
(18)/SNR55.5/80-5768PR(L5)
CEN00419-01
*GP: General Purpose (Stockpile) bucket with teeth *SNR: Spade Nose Rock bucket with teeth.Note: (a) GP (Std) buckets are all based on SG of 1.7t/m3 and a bucket fill factor of 100%.
(b) SNR (Std) buckets are all based on SG of 1.8t/m3 and a bucket fill factor of 100%.
WHEEL LOADERS: “medium size” product range (7.4t to 24.9t)MODEL: WA150-5 WA200-6 WA250-6 WA320-6 WA380-6 WA430-6 WA480-6A
ENGINE NET POWER:(SAE J1349/ISO 9249) @
BUCKET:Capacity - (Std SAE heaped) Bucket Range Breakout Force Static Tipping Load: (Straight) Static Tipping Load: (Full turn) Dumping Clearance (max. height at 45°)
DIMENSIONS:Height (to top of cab) Width (with bucket)Length (incl. bucket)
OPERATING WEIGHT: Includes the following
ATTACHMENTS:
Spec. Catalog No.
kWrpm
m3
m3
kgfkgkgmm
mmmmmmkg
(m3) BucketTyres
(rating)
712 000
1.4*GP(1.3-1.7)8 0776 4355 5702 745
3 0602 4306 5057 498
(1.4)/GP16.9x24
10PR(L2) TIRESCEN00264-02
942 000
1.7*GP(1.7-2.4)8 4658 7857 5552 655
3 1102 5507 0309 630
(1.9)/GP 17.5x2512PR(L4)
CEN00268-01
1032 000
2.1*GP(1.9-2.7)10 83011 53010 1402 735
3 2702 7057 200
10 870
(2.1)/GP17.5x25
16PR(L2)TIRESCEN00259-02
1252 000
2.6*GP(2.1-3.2)11 70011 79510 5502 740
3 2002 7607 660
13 745
(2.6)/GP20.5x2512PR(L3)
CEN00270-02
1422 100
3.1*GP(2.7-4)17 30014 66012 7802 820
3 3902 9258 365
17 510
(3.1)/GP23.5x2512PR(L3
CEN00076-06
1722 100
3.1*GP.(3.1-4.6)19 80013 98012 9902 895
3 3903 0658 460
18 220
(3.5)/GP23.5x2512PR(L5)
CEN00139-04
2232 000
4.3*GP(3.8-6.1)25 40020 11017 2053 195
3 5003 1909 160
24 910
(4.3)/GP26.5x2520PR(L5)
CEN00134-03
Page 18Page 19
DUMP TRUCKS: Articulated Dump Trucks product rangeMODEL: HM300-2R HM400-3R
ENGINE:MAKE MODEL
NET POWER: (ISO4249/SAEJ1349) Max Travel Speed
BOWL:Struck Capacity Heaped Capacity: (2:1 SAE) Loading Height
DIMENSIONS:Height (to top of cab) Width (over tyres) Width (overall) Length
OPERATING WEIGHT:Gross Vehicle Weight Empty weight Payload
TYRE SIZE: Spec. Catalog No.
kW@rpm km/h
m3 m3 mm
mm mm mm mm
kg kg kg
Komatsu SAA6D125E-5
246 2 000 58.6
12.9 16.6
2 790
3 520 2 900 2 900
10 440
51 420 24 040 27 300
23.5R25 CEN00206-01
KomatsuSAA6D140E-5
3342 000
56
18.224
3 164
3 7353 4503 450
11 105
74 00533 92540 000
29.5R25CEN00510-02
MOTOR GRADERS: product range (15.1t to 26.3t)MODEL: GD535-5 GD555-5 GD675-5 GD825A-2
ENGINE: Make Model
POWER: Flywheel (SAE J1349/ISO 9249) @ Max Speed: (Forward) Max Speed: (Reverse)
BLADE: LengthHeight
DIMENSIONS:Height Width Length
OPERATING WEIGHT: Including
ATTACHMENTS:ROPS/FOPS Cab Rear Ripper/Scarifier Ripper shanks Scarifier shanks
Tyres:Spec. Catalog No.
kW r/min km/h km/h
mm mm
mm mm mm kg
qtyqtysize
Komatsu SAA6D107E-1
101-1082 000
42 34.1
3 710 645
3 250 2 455 9 880
15 150
Low Profile Rear Ripper
3 0
14x24(G2) CEN00731-02
Komatsu SAA6D107E-1
118-1442 000
44 40.3
3 710 645
3 200 2 485
10 375 15 135
Low Profile Rear Ripper
3 0
17.5x25(L4) CEN00395-04
Komatsu SAA6D107E-1
134-163 2 100 44.3 40.3
4 320 645
3 200 2 630
10 575 17 885
Low Profile Std 5 9
17.5x25(L4) CEN00397-03
KomatsuS6D140E
2092 10044.947.9
4 878850
3 5503 240
11 47026 350
Low ProfileStd5-
23.5x25(L5)HESS745101
Page 20Page 21
DUMP TRUCKS: Rigid Dump Trucks product rangeMODEL: HD325-7R HD465-7R HD785-7 HD1500-8 730E-8 830E AC 860E-1K 930E-4 960E-2K 980E-4
ENGINE: Make Model Drive System
POWER: Flywheel (SAE J1349/ISO 9249) @ Max Speed Loading Height Height Total Width Total Length Turning Radius Empty Vehicle Weight Gross Vehicle Weight Payload (Max)
TYRE SIZE:
Spec. Catalog No.
kWr/minkm/hmmmmmmmmmkgkgT
size
KomatsuSAA6D140E-3Mechanical
3712 000
70 3 2004 1504 5258 365
7.231 60069 280
36.5
18x3328PR
CEN00213-02
KomatsuSAA6D170E-3Mechanical
5332 000
703 6004 4005 3959 355
8.543 10099 680
55
24x3536PR
CEN00178-04
KomatsuSA12V140E-3Mechanical
8791 900
654 2955 0506 885
10 29010.1
72 000163 780
91
27xR49
CEN00136-09
KomatsuSDA16V159-3Mechanical
1 1031 90056.5
5 0706 1807 550
12 93511.2
107 600249 575
142
33xR51
CEN00783-02
KomatsuSSA16V159Electrical
1 4051 900
656 0306 8108 450
13 70013.6
146 963328 401
181
Std. 37 x R57 Optional x R57
AESS844.01
KomatsuSDA16V160Electrical
1 7611 900
646 7106 8807 320
14 15028.4
164 200385 848
221.6
40xR57
AESS672-03
KomatsuSSDA16V160
Electrical
1 9021 900
656 3907 3009 390
14 93031
200 351454 363
254
Std. 50/80 R57Optional 50/90
R57AESS791-01
KomatsuSSDA16V160
Electrical
1 9021 900
657 0607 3708 690
15 60029.7
210 187501 974
292
53/80R63
AESS743-00
KomatsuSSDA18V170
Electrical
2 4951 90064.5
7 3907 670
10 00015 340
32249 475576 072
327
56/80R63
AESS833-00
KomatsuSSDA18V170
Electrical
2 4951 900
617 0908 000
10 01010 110
32255 868625 277
369.4
59/80 63
AESS908-00
*Nominal payload is as defined within Komatsu America Corp. payload policy documentation. Nominal payload must be adjusted should the weight of any customised body or tyres fitted vary from that of the standard Komatsu body and tyres as shown above. Nominal payload must also be adjusted to take into account the additional weight or any customised/optional extras fitted to the truck which are not stated within the Standard Features list of this specification sheet.
BACKHOE LOADER: product rangeMODEL: WB93R-5EO
ENGINE: Make: Model:
Net Power (SAE J1349/ISO 9249) Max Speed: Forward and Reverse Drive
FRONT LOADER BUCKET:CapacityWidth (std. bucket) Dump HeightBreakout Force (std. bucket) (ISO 8313) Lift Capacity @ max. heightLift Capacity @ ground level (ISO 8313)
BACKHOE BUCKET:Capacity (std. bucket) (ISO 7546) Width (std. bucket) Bucket width rangeBucket Breakout Force (ISO 6015) Max. Digging Depth (with telescopic arm) Reach at Ground Level (from swing centre) Arm Breakout Force (ISO 6015)
DIMENSIONS:Transp. Height - Std Arm (Tele Arm) Overall Width (with std bucket) Length (Transport)
OPERATING WEIGHT: TYRES:
FrontRear
Spec. Catalog No.
kW@rpmkm/h
m3
mmmm
kgf/kNkgkg
m3
mmmm
kgf/kNmm (mm)mm (mm)kgf/kN
mm (mm)mmmmkg
KomatsuSAA4D104E-1
74@2 20040
2WD/4WD Selectable
1.032 3202 720
6 500/63.743 9005 300
0.22600
300-9006 100/59.8
5 020/(6 055)5 750/6 7154 000/39.2
3 720/(3 750)2 3205 8178 070
12.5/8 R18 10PR16.9x28 12PR
WESS 004509
Page 23Page 22
MOBILE CRUSHERS: product rangeMODEL: BR380JG-1EO BR580JG-1
Feed Opening SizeCrusher ModelCrusher TypeENGINE:
MakeModel
OPERATING WEIGHT:TRAVEL SPEED:RATED OUTPUT: kW@rpm
Overall Length (trans/Oper)Overall Height (trans/Oper)Overall Clearance (travel crushing)
PROCESSING CAPACITY:Concrete (debris)Natural Stone (rock)
Spec Catalog No.
mm
kgkm/hrkWmmmm
t/hourt/hour
1 065x550KCJ4222
Jaw
KomatsuSAA6D107E-1
34 0003
140@2 05012 500/12 500
3 200/3 200(200-300/100-200)
**60-175**50-240 CEN00175-04
1 120x765KCJ4430
Jaw
KomatsuSAA6D125E-5
49 0003
257@1 90014 495/14 540
3 365/3 820(200-350/100-200)
*100-460* 130-400CEN00275-00
Note: Crushing Capacity is the sum of crushed volume and muck removed by Vibratory Grizzly Feeder.* EPA Tier 3 and EU Stage 3A Emissions Regulations Certified.** It depends on the type and properties of the material and the working conditions.
SKID STEER WHEELED LOADER: product rangeMODEL: SK714-5
OPERATING WEIGHT: Engine Net Power (SAE J1349)
BUCKET CAPACITY: Std (ISO 7546) Bucket widthBucket breakout force (ISO 8313)
PERFORMANCE:Rated operating capacity (ISO 8313) Dumping clearance, max. heightTipping load (ISO 5998) Max. Lifting Capacity (ISO 8313)
TRAVEL SPEEDS:Forward: Working speed
Travel speedReverse: Working speed
Travel speedTurning Radius (outside corner of bucket) Turning Radius (at rear tail corner) Ground clearance
DIMENSIONS:Overall length - including std. bucketOverall width - with std. bucketOverall height - to top of cabWheelbaseWidth over tyresTreads (front and rear)
TYRES: Front & RearFUEL TANK CAPACITY:Spec. Catalog No.
kgkW@rpm
m3
mmkgf
kgmmkgkg
km/hkm/hkm/hkm/hmmmmmm
mmmmmmmmmmmm
litres
2 53034.9@2 800
0.351 5501 750
6502 1401 3001 850
10.516
10.516
2 1001 340210
3 2001 5501 960950
1 5201 250
10-6.5 8PR53
WESSOO6503
Mojo Motor Industries (Pvt) Ltd6 Dagenham Road, Willowvale, Harare, Zimbabwe
Goliath Gwese +263 77 718 5090 Email: [email protected] | www.mmi.co.zw