KOMARAPALAYAM-637303 2013 Regulation AERO.pdfCO No Course Outcomes C101.1 Develop their basic...

CO No Course Outcomes

C101.1 Develop their basic communication skills in english.

C101.2 Inculcate the habit of reading and writing leading to effective and efficient communication.

C101.3Enhance comprehension through the use of writing - to - learn strategies to improve

comprehension retention.

C101.4 Create an ability to interpret,evaluate and apply in the program.

C101.5 Implement before- during- after reading strategies that build comprehension.


C102.1 Understand the use of matrix algebra techniques that is needed by engineers.

C102.2 Analyse the infinite series approximations for solutions arising in mathematical modeling.

C102.3 Apply the functions of several variables in engineering field.

C102.4 Acquire the concepts of curvature & applications of diifferential calculus.

C102.5 Evaluate multiple integrals which are applied in engineering problems.


C103.1 Understand the impact of Crystal Physics.

C103.2 Learn the physical properties of materials.

C103.3 Acquire Knowledge on Quantum Physics.

C103.4 Acquaint with Ultrasonics and its application in NDT .

COURSE OUTCOMES FOR 2013 REGULATION, ANNA UNIVERSITY, CHENNAI

KOMARAPALAYAM-637303

DEPARTMENT OF AERONAUTICAL ENGINEERING

COURSE NAME :C103 (PH6151 Engineering Physics– I)

COURSE NAME :C102 (MA6151 Mathematics-I)

COURSE NAME :C101 (HS6151 Technical English – I)

C103.5 Know the principle of Laser & fiber optics and its applications.


C104.1 Understand Polymerisation and some Important industrial polymers.

C104.2 Learn Thermodynamic properties And their Inter relationship.

C104.3 Acquaint With UV and IR Spectral analysis.

C104.4 Know The Principle Of cooling curves and alloys.

C104.5 Acquire Knowledge of Nano and micro struture materials.


C105.1 Efficient use of number system in various applications.

C105.2 Solve simple scientific and statistical applications.

C105.3 Write an application suitable for sorting and searching.

C105.4 Handle string manipulation in text applications.

C105.5 Create an effectiveness and efficiency using pointers.


C106.1 Perform free hand sketching of basic geometrical constructions and multiple views of objects.

C106.2Do orthographic projection of lines and plane surfaces inclined to both the principal planes by

rotating object method.

C106.3Draw projections of solids and development of surfaces like prisms, pyramids, cylinder, cone

and truncated solids.

C106.4 Prepare isometric and perspective sectional views of simple solids with cut-outs and holes.

C106.5Know the drafting packages used in mechanical engineering and demonstration of computer

aided drafting.

COURSE NAME :C104 (CY6151 Engineering Chemistry– I)

COURSE NAME :C105 (GE6151 Computer Programming)

COURSE NAME :C106 (GE6152 Engineering Graphics)


C107.1 Apply good programming design methods for program development.

C107.2 Design and implement C programs for simple applications.

C107.3 Develop recursive programs.

C107.4 Able to develop the application using Structure and union.

C107.5 Analyse the program ,retrieve the errors and manipulate it.


C108.1 Prepare simple lap, butt and tee joints using arc welding equipments.

C108.2 Prepare simple components using lathe and drilling machine.

C108.3 Fabricate Sheet Metal components and different type of joints.

C108.4 Learn about the working principle of centrifugal pump and air conditioner.

C108.5 Understand the basics of molding operations.


C109.1 Analyze the physical properties such as mechanical and thermal properties of materials.

C109.2Acquire the knowledge in optics such as interference, Diffraction and Understand about the

spectral instruments.

C109.3 Gain the knowledge on properties of matter with sound waves.

C109.4 Apply knowledge of measurement of chloride, DO, conductance and pH.

C109.5 Understand the impact of water quality and solve engineering problems.

COURSE NAME :C109 (GE6163 Physics and Chemistry Laboratory– I)

COURSE NAME :C110 (HS6251 Technical English –II)

COURSE NAME :C107 (GE6161 Computer Practices Laboratory)

COURSE NAME :C108 (GE6162 Engineering Practices Laboratory)


C110.1 Analyse their opinions clearly using appropriate communicative strategies.

C110.2 Evaluate the different types of writing such as creative, critical and analytical.

C110.3Understand the implied meanings and critically analyse and evaluate them for ideas and for

method of presentation.

C110.4 Comprehend different spoken excerpts critically and infer unspoken and implied meanings.

C110.5Recognize different points of view and work effectively with others to support for a shared

purpose or goal.

COURSE NAME :C111 (MA6251 Mathematics-II)


C111.1 Apply the concept of vector calculus in Engineering disciplines.

C111.2 Acquire the knowledge of Ordinary Differential Equations to solve the Engineering problems.

C111.3Understand the knowledge of Laplace Transforms in solving Ordinary Differential

Equations.

C111.4 Evaluate the standard techniques of complex variable to solve core Engineering problems.

C111.5 Analysis the real integrals by applying concept of complex integration.


C112.1 Gaining knowledge on the conducting materials.

C112.2 Understand the concept of semiconducting materials and its types.

C112.3 Learn the properties of magnetic and superconducting materials.

C112.4 Acquaint with the basic nature of dielectric materials.

C112.5 Impart knowledge on modern engineering materials.


COURSE NAME :C112 (PH6251 Engineering Physics-II)

COURSE NAME :C113 (CY6251 Engineering Chemistry – II)

C113.1 Acquire knowledge about hard and soft water.

C113.2 Learn the importance of production of metals from corrosion.

C113.3 Understanding solar energy and eletrical energy to control pollution.

C113.4 Know about engineering materials and their applications.

C113.5 Acquaint knowledge about fules and combustion for complete efficency.


C114.1 Experiment with basic electronics and the measuring instruments.

C114.2 Explain the construction and working principle of motors, generators and transformers.

C114.3 Analyse the characteristics of diodes, rectifiers and transformers.

C114.4 Make use of the knowledge of digital electronics and conversion of signals in Avionics.

C114.5 Utilize the fundamentals of communication engineering with its practical application.


C115.1Make use of the various basic knowledge on Laws of Mechanics, Laws of forces and concern

problems.

C115.2Apply the facts of vector and scalar representation of forces and moments in equilibrium of

rigid bodies

C115.3 Compute moment of inertia for different plane areas and solids.

C115.4 Evaluate the relationship of various dynamics of particles.

C115.5 Estimate the frictional force and effects of rigid bodies subjected to dynamic forces.


C116.1 Ability to use the software package for drafting and modeling.

COURSE NAME :C116 (GE6261 Computer Aided Drafting and Modelling Laboratory)

COURSE NAME :C114 (GE6252 Basic Electrical and Electronics Engineering)

COURSE NAME :C115 (GE6253 Engineering Mechanics)

C116.2 Ability to create 2D and 3D models of Engineering Components.

C116.3 Ability to draw orthographic view from isographic view.

C116.4 Study the commands of software to draw basic shapes.

C116.5 Evaluate the plan of residental buildings.


C117.1 Analyze the various Modulus of materials and fludic property of the the given liquid.

C117.2Acquire the practical knowledge about band gap of a semiconductor and Interference

,Diffraction.

C117.3 Gaining the knowledege of electrochemical redox reaction.

C117.4 Apply knowledge of measurement of hardness producing ions, alkalinity, conductance, EMF.

C117.5 Understand the impact of water quality and to solve engineering problems.


C201.1Predict to formulate and some of the physical problems involving partial differential

equations

C201.2 Unterstand the concept of the fourier series related problems and harmonic analysis

C201.3 Apply the application of PDEs in various engineering problems

C201.4Analyse problems related to engineering applications by using Fourier Transforms

Techniques.

C201.5 Understand the concept of difference equation using z-transform


C202.1 Apply the knowledge on metal casting processes to the industry.

C202.2 Discuss the Practices on welding equipments and its processes to join metals.

COURSE NAME :C202 (ME6352 Manufacturing Technology)

COURSE NAME :C117 (GE6262 Physics and Chemistry Laboratory– II)

COURSE NAME :C201 (MA6351 Transforms and Partial Differential EquationsI)

C202.3 Classify and explain the machine tools and machining operations.

C202.4 Explain the various types of plastics in industrial applications.

C202.5 Utilize the knowledge and importance of metal forming process and powder metallurgy.


C203.1Analyze flow process of various thermal equipments and rerlate the concept of temperature,

heat, internal energy, specifc heat capacities enthalpy of ideal and real gases.

C203.2Apply the knowledge of second law of thermodynamics and entropy in to the development of

aero engines.

C203.3Analyze the problems related to flow of energy associated with heat flow and compare air

standard cycles such as otto, diesel, brayton and dual cycles.

C203.4Design and improve the engine efficiency by analysing the properties like solid, liquid and

vapour phases.

C203.5Illustrate the basic propulsion and heat transfer concepts like thrust equation, specific

impulse, ideal and non ideal cycles.


C204.1 Discuss properties of fluids and solve continuity,momentum and energy equation.

C204.2 Classify boundary layer thickness and solve pipes and flow loss problems.

C204.3 Perform dimensional analysis problems .

C204.4 Compare various types of pumps and calculate its performance.

C204.5 List various types of turbines and calculate its performance.


C205.1 Solve the problems in structural components under various loading conditions.

C205.2 Analyze the bending moment and shear force on structures under various loading conditions.

C205.3 Develop the response of the structures based on its geometry.

COURSE NAME :C203 (AE6301 Aero Engineering Thermodynamics)

COURSE NAME :C204 (CE6451 Fluid Mechanics and Machinery)

COURSE NAME :C205 (CE6452 Solid Mechanics)

C205.4 Estimate the various parameters of spring, column and shaft.

C205.5 Examine the behaviour of structures under complex loading conditions.


C206.1Illustrate the history and evolution of aircrafts along with the description of systems,

aerodynamics, structures and materials.

C206.2Evaluate the atmospheric properties, lift, drag and moment of aerofoils and explain the

various aircraft maneuvers and effect of mach number.

C206.3

Understand the functions of powered controls, conventional controls and control actuation

systems and classify the flight vechicles and demonstrate the functions of airplane

components.

C206.4Construct the aircraft’s structures based on different configurations and prefer suitable

materials along with the stresses and strains.

C206.5Demonstrate the various propulsion units used to achieve thrust in the atmosphere and space

operated vehicles.


C207.1 Determine tensile strength and shear strength of mild steel and aluminium rods.

C207.2 Test the shear and impact strength of a material .

C207.3 Estimate the deflections of a beam and hardness of material.

C207.4 Measure the compression strength and strain measurement on helical springs.

C207.5Analyze the effect of hardening,tempering and able to compare the improved mechanical

properties of the material.


C208.1 Value the co-efficient of discharge using the orifice and venturimeter by measuring.

C208.2 Inspect the discharge coefficient of rotating meter and error of setup

C208.3Examine the major or frictional and minor losses which is created inside the pipes due to

fluid flow.

C208.4 Calculate the performance of centrifugal / submersible, reciprocating and gear pumps.

COURSE NAME :C207 (CE6315 Strength of Materials Laboratory)

COURSE NAME :C208 (CE6461 Fluid Mechanics and Machinery Laboratory)

COURSE NAME :C206 (AE6302 Elements of Aeronautics)

C208.5 Test for the performance characteristics of Kaplan, Pelton and Francis turbines.


C209.1 Determine the performance characteristics of 2-stroke and 4-stroke desiel/petrol engine.

C209.2 Interpret the effectiveness of heat exchanger with parallel and counter flow.

C209.3 Experiment and calculate the calorific value of the fuel and its properties.

C209.4 Reveal the thermal conductivity and resistance of solids and composites wall respectively.

C209.5 Predict the vapour compression of refrigeration and air conditioning test rig.


C210.1 Design and modelling difficult aero component.

C210.2 Simulate the drilling,facing and turning operations using CNC softwares and machining.

C210.3 Design and modelling of machine component using CATIA software

C210.4 Modify the design using CATIA software.

C210.5 Perform structural analysis using available software packages


C211.1Explain the basic concepts of algebraic equations, eigenvalue problems, representing steady

state models formed in Engineering Problems.

C211.2understanding the interpolation and approximation which is cetral to many application in

engineering apart from solving problems and understanding situations.

C211.3Analyse to numerical differentiation and intergration which is central to many application and

techniques

C211.4Apply to fit smooth curves for the discrete data connected to each other or to use

interpolation methods over these data tables.

C211.5 Predict the system dynamic behavior through solution of ODEs modeling the system

COURSE NAME :C210 (AE6312 CAM and Manufacturing Laboratory)

COURSE NAME :C209 (AE6311 Thermodynamics Laboratory)

COURSE NAME :C211 (MA6459 Numerical Methods)


C212.1Rephrase the concepts of low speed elementary flows and their combinations by framing the

fundamental governing equations.

C212.2Illustrate two dimensional inviscid incompressible flow and vortex flow and predict the

circulation around the aerodynamic bodies.

C212.3Infer the theory of airfoil and its characteristics along with the potential functions and

transformations.

C212.4Determine the aerodynamic forces and moments and their coefficients as well as center of

pressure using subsonic wing theory.

C212.5Experiment with the zones of boundary layer and determine the total drag and its coefficient

for flow around the body.


C213.1 Recognize the various aircraft system principles and their operation.

C213.2 Demonstrate the Aircraft control systems and modern technology.

C213.3 Illustrate all engine systems and their functions.

C213.4 Comprehend Aircinditioning & pressurisation and other auxilary systems.

C213.5 Compare all type of instruments in aircraft and their principles and operation.


C214.1Explain the mechanisms, Velocity and acceleration polygons, CAMs and its follower

motions.

C214.2 Identify the components of gear and gear trains

C214.3 Estimate the friction over a clutches, Belt, rope drive and breaks

C214.4Analyze the applied and constrained forces, static force analysis, Dynamic force analysis and

inertia forces and inertia torques

C214.5Determine the correct static and dynamic and balancing of revolving and reciprocating

masses, to measure the free, torsional and damped vibrations

COURSE NAME :C212 (AE6401 Aerodynamics - I)

COURSE NAME :C213 (AE6402 Aircraft Systems and Instruments)

COURSE NAME :C214 (AT6302 / Mechanics of Machines)

COURSE NAME :C215 (AE6403 Aircraft Structure - I)


C215.1Estimate the response of statically determinate and indeterminate structures under various

loading conditions.

C215.2 Apply the kniwledge in strain energy methods to calculate the reactions of various structures.

C215.3 Analyze the column using appropriate methods.

C215.4 Design the structure using different theories of failure.

C215.5 Examine the structural effect due to induced stresses.


C216.1 Classify various types of engines and factor affecting of engine performance.

C216.2 Functions of inlets, combustion chambers, and exhaust nozzles of jet engine.

C216.3Solve operating characteristics of compressors in terms of given blade shapes, angles, and

direction of rotation.

C216.4 Discuss the operation of turbines in terms of given blade shapes, angles, and direction of

rotation in gas turbine propulsion systems.

C216.5 Describe the principle and performance of ramjet,scramjet and Ram rockets.


C217.1 Determine the defelction and various strength of metallic and composite beams

C217.2 Interpret and verify the superposition and maxwell's reciprocal theorem

C217.3 Estimate the buckling load and southwell plot of column

C217.4 Examine non destructive testing to predict the properties of metallic materials

C217.5 Analyze truss, frame and shear failure of riveted and welded joints


COURSE NAME :C216 (AE6404 Propulsion-I)

COURSE NAME :C217 (AE6411 Aircraft Structures Laboratory - I)

COURSE NAME :C218 (AE6412 Aerodynamics Laboratory)

C218.1Evidence the Bernoulli’s equation with the orifice and venturimeter by measuring coefficient

of discharge.

C218.2Reckon the major or frictional and minor losses which is created inside the pipes due to fluid

flow.

C218.3 Test the low speed subsonic wind tunnel for error free experimentation.

C218.4 Measure the aerodynamic forces and moments with calibrated low speed subsonic wind.

C218.5Appraise the pressure distribution for streamlined and bluff bodies and various flow

visuvalization techniques over them


C219.1 Design and draft various types of riveted joints.

C219.2 Design and draft various types of welded joints.

C219.3 Design and draft control components like cam, bell crank, gear and push pull rod

C219.4 Construct the three view diagram of typical aircraft

C219.5 Design and draft the layout of control system, fuselage and wing structure of a typical aircraft


C301.1Evaluate the performance characteristics like aerodynamic forces and power variations of

aircraft.

C301.2Interpret the range, endurance, climbing, gliding and various maneuvering performances of an

aircraft along with load factor and its limitations.

C301.3 Illustrate the degrees of freedom and static longitudinal stability attained in aircraft.

C301.4 Correlate the aircraft’s lateral and directional stability.

C301.5 Determine the response of aircraft in various oscillatory modes of aircraft stability.


C302.1 Analyze the beam structural response when influenced with various of types loads.

COURSE NAME :C219 (AE6413 CAD & Aircarft Component Drawing)

COURSE NAME :C301 (AE6501 FLIGHT DYNAMICS)

COURSE NAME :C302 (AE6502 Aircraft Structures - II)

C302.2 Identify the shear flow of open sections.

C302.3Determine the shear flow distributions of closed sections in single and multicell structure

subjected to bending and torsion.

C302.4 Examine the buckling characteristics of thin plate under various loading conditions.

C302.5 Interpret the stress analysis of aircraft wing and fuselage.


C303.1Recognize the governing equations for 1D compressible flows with mach serious and nozzle,

hypersonic characteristics.

C303.2 Solve shocks and expansions of flow properties with their interaction and reflection.

C303.3Discuss about the linearized equations for 2D compressible flow and method of

characteristics.

C303.4 Describe the various flows over airfoils, wings and airplane configuration in high speed.

C303.5 Explain the experimental techniques for high speed flow wind tunnel and its method.

COURSE NAME :C303 (AE6503 Aerodynamics - II)


C304.1 Classify the hyper sonic vechile and its problem assoicate

C304.2 Describe the chemical rocket motors and performance

C304.3 Estimate the design of solid rocket burning and propulent grains

C304.4Demonstrate the various fuel feed systems ,aplications and mechanisms in liquid and hybrid

rocket motor

C304.5 Discuss the various types and techniques in nuclear ,solar and electrical rocket propulsion


C305.1 Model a system mathematically for controlling desire values.

C305.2 Compile the transfer function of open loop and closed loop System.

C305.3 Analyze the time domain responses of the system.

C305.4 Identify the stability of the system both in time and frequency domain.

C305.5 Explain about the Digital Control System.


C306.1Demonstrate the environmentalal importance, various ecosystem and biodiversity of our

nature.

C306.2 Infer the knowledge of environmental pollusions, its types, effects and preventing solutions.

C306.3 Discuss the natural resources, problems and solutions to our environment.

C306.4 Examine the issuses of social and environmental cum creating awareness.

C306.5 Compare the impact of human population explotion and the causes to the environment.

COURSE NAME :C307 (AE6511 Aircraft Structures Laboratory – II)

COURSE NAME :C304 (AE6504 Propulsion - II)

COURSE NAME :C306 (GE6351 Environmental Science and Engineering)

COURSE NAME :C305 (AE6505 Control Engineering)


C307.1 Determine bending, torsion, shear on various structures.

C307.2 Estimate the fringe pattern of a photo elastic material.

C307.3 Analyze aircraft structural components under different loading conditions.

C307.4 Analyze free and forced vibration in cantilever beam.

C307.5 Evaluate the elastic component of composite tensile and flexural specimen.


C308.1Experimentally the performance parameters in a gas turbine engine under various operating

conditions.

C308.2 Determine the efficiencies of different types of propeller under various operating speeds.

C308.3 Evaluate the exit velocity of the fluid passes through the various ducts.

C308.4 Study of various type of flame stabilization.

C308.5 Evaluate the heat transfer coefficients in various engineering systems.


C309.1Develop their communicative competence in English with specific reference to listening and

speaking

C309.2 Enhance their ability to comprehend and communicate effectively

COURSE NAME :C309 (GE6563 Communication Skills - Laboratory Based)

COURSE NAME :C308 (AE6512 Propulsion Laboratory)

C309.3 Strengthen their prospects of success in taking competitive examinations

C309.4 Give emotional intelligence to manage time and stress

C309.5 Inculcate leadership qualities and career planning


C310.1Understand the concepts of management, administration and the evolution of management

thoughts.

C310.2 Understand and apply the planning concepts.

C310.3 Analyze the different organizational structures and understand the staffing process.

C310.4Analyze the various motivational and leadership theories and understand the communication

and controlling processes.

C310.5 Understand the various international approaches to management.


C311.1Apply direct stiffness, Rayleigh -Ritz, Galerkin method to solve engineering problems and

outline the requirements for convergence

C311.2Solve linear 1D structural rod, beams and frames problems; evaluate the Eigenvalues and

Eigenvectors for stepped bar and beam

C311.3 Solve two dimensional Structural problems FEM method

C311.4Derive shape functions for 4 and 8 node quadrilateral, 6 node triangle elements and apply

numerical integration to solve; 1D and 2D; stiffness integrations

C311.5Calculate heat conduction and convection heat transfer problems and familiarize FEA

software


C312.1 Explain about the free, forced, damped, undamped and vibration measuring instrument.

C312.2 Calculate natural frequency for two Degrees and Multi degrees of Freedom Systems.

C312.3 Measure the frequency of a continuous systems.

COURSE NAME :C310 (MG6851 Principles of Management)

COURSE NAME :C311 (AE6601 Finite Element Methods)

COURSE NAME :C312 (AE6602 Vibrations and Elements of Aeroelasticity)

C312.4 Estimate the natural frequency of a system using approximate methods.

C312.5Identify the effects of vibrations on aircraft structures and the change in aerodynamic property

of the structures


C313.1 Identify the properties of fiber and matrix materials used in commercial composite materials

C313.2 Analyze the structural properties of composite materials using macromechanic approach

C313.3Implement composite structures in aerospace design based on knowledge acquired in

composite laminate analysis

C313.4Select the most appropriate manufacturing process for fabricating composite components

based on its requirement

C313.5 Apply the conventional failure theories to sandwich constructions


C314.1 Explain the properties of different aircraft materials.

C314.2 Compare the mechanical behaviour of various materials for aerospace application.

C314.3 Conduct the Heat treatment and surface treatment process for various alloys.

C314.4 Select suitable materials for different parts of the aircraft.

C314.5 Categorize the high temperature materials for aerospace applications


C316.1 Recognize aircraft ground handling practices and support equipment.

C316.2 Explain the maintenance of Air conditioning & pressurization and oxygen and oil systems.

C316.3 Illustrate the safety for maintenance activity.

C3164 Compare the different inspection methods.

C316.5 Demonstrate the aircraft servicing tools, materials and system processes.

COURSE NAME :C313 (AE6603 Composite Materials and Structures)

COURSE NAME :C314 (AE6604 Aircraft Materials and Processes)

COURSE NAME :C316 (AE6002 Aircraft General Engineering and Maintenance Practices)

COURSE NAME :C317 (AE6003 Space Mechanics)


C317.1Summarize the history and evolution of space missions along with the description of space

environment, structures and materials.

C317.2 Interpret the basic concepts of space science and the general N-Body problem.

C317.3 Estimate the performance of satellite injection, satellite perturbations and trajectory control.

C317.4Predict the interplanetary trajectories, launch of interplanetary spacecraft and trajectory

estimation.

C317.5 Determine the ballistic missile trajectories and to control the various ballistic missiles.


C318.1 Apply the knowledge of conduction and solve various types of conduction problems.

C318.2 Clasify the convection and solve various types of convection problems.

C318.3 Explain about radiation and solve various types of radiation problems.

C318.4 Discuss about numerical methods in heat transfer.

C318.5 Identify the heat transfer problems in aerospace engineering.


C319.1Demonstrate dismandeling and assembling of piston engine, cam shaft operation,fireing order

,magneto operations and valve timing

C319.2 Explain the lubrications system ,cooling sysytems ,auxilary systems,pumps and carburetor

C319.3 Construct the models using wood guling ,single &double scarf joints and welding techiques

C319.4 Take part in patch repairing and pipe line repairs of aircrafts

C319.5Design using the sheet metal forming techniques and able to test the prepared glass epoxy

specimens


COURSE NAME :C318 (AE6004 Heat Transfer)

COURSE NAME :C319 (AE6611 Aero Engine and Airframe Laboratory)

COURSE NAME :C320 (AE6612 Aircraft Design Project - I)

C320.1 Identify the configuration of different types of aircraft and other flight vehicles.

C320.2 Design of a complete aircraft based on the specifications provided.

C320.3 Select a power plant suitable for the required performance.

C320.4 Estimate drag and other design parameters required for the mission objective.

C320.5 Calculate performance characteristics of aircraft.


C321.1 Simulate flow inside the nozzle and compressor using ANSYS Fluent

C321.2 Simulate flow over subsonic and super sonic wing and diffusers ANSYS Fluent.

C321.3 Simulation flow through turbine blade passage ANSYS Fluent.

C321.4Analysis stress and deflection of wing , fuselage and landing gear structure using Fem

Software

C321.5 Analysis Composite structure using Fem Software


C401.1 Understand quality concepts and philosophies of TQM.

C401.2 Apply TQM principles and concepts of continuous improvement.

C401.3Apply and analyze the quality tools, management tools and statistical

fundamentals to improve quality.

C401.4 Understand the TQM tools as a means to improve quality.

C401.5 Remember and understand the quality systems and procedures adopted.


C402.1 Prepare preliminary design requirements for avionics systems

COURSE NAME :C321 (AE6613 Computer Aided Simulation lab)

COURSE NAME :C401 (GE6757 Total Quality ManagementI)

COURSE NAME :C402 (AE6701 Avionics)

C402.2 Integrate avionics systems using digital computers and microprocessors

C402.3 Analyze the performance of various cockpit display technologies

C402.4 Formulate navigation systems for aircrafts

C402.5 Select air data systems with basic principle of auto pilot.


C403.1 Solve the Continuity ,momentum and energy equations for CFD problems

C403.2Apply the Finite Difference Method and Finite Volume Method for solving heat transfer

problems

C403.3 Apply Various discretization Schemes for solving flow and Heat transfer problem

C403.4 Implement Various flow Field Algorithms for solving CFD problems

C403.5Compare various Turbulence Models and Grid generation techniques for solving CFD

problems


C404.1 Apply the knowledge of stress and strain measurements in loaded components.

C404.2 Explain the various types of strain guages.

C404.3 Apply experimental techniques of stress analysis using photoelasticity and strain gauges.

C404.4 Estimate the strain using brittle coating and moire method.

C404.5 Identify the defects in structure using various Non Destructive Testing.


C407.1 Solve and estimate fatigue life for simple problems.

C407.2 Analyze the concepts of cumulative damage and load histories.

COURSE NAME :C404 (AE6702 Experimental Stress Analysis)

COURSE NAME :C407 (AE6007 Fatigue and Fracture)

COURSE NAME :C403 (ME6014 Computational Fluid Dynamics)

C407.3 Estimate fatigue crack propagation life for simple problems.

C407.4 Apply the concept fracture mechanics to aircraft structure problems.

C407.5Explain the concept of various design philosophies, fatigue resistance of fiber-metal

laminates.


C410.1 Make use of the aircraft structural components maintanence and repair with techniques.

C410.2 Classify the properties of plastics and composites used in an aircraft structures.

C410.3 Takepart the aircraft jacking, assembly and rigging and flight controls of helicopter.

C410.4Distinguish the hydraulic and pneumatic system and installation maintanence and inspection

of auxillary system of an aircraft.

C410.5 Adapt the safety precautions and equipments of an aircraft.


C411.1 Illustrate the ports abd systems of the piston engine and its maintenances.

C411.2 Demonstrate the aircraft propeller and its inspection procedure.

C411.3 Explain the ports and maintenance of the jet engine.

C411.4 Comprehend the testing and inspection of engine systems.

C411.5 Explain the engine overhauling procedures.


C412.1 Analyze the functions of airtraffic control sysytems, VFR, IFR and ATS air spaces.

C412.2Perceive air traffic systems, ATS routes, RNAV & RNP, sepration proceduress, ATC

clearance and flight plans.

C412.3Improve the flight information systems, radar control, non radar control and emergency

processes.

COURSE NAME :C410 (AE6010 Airframe Maintenance and Repair)

COURSE NAME :C411 (AE6011 Aero Engine Maintenance and Repair)

COURSE NAME :C412 (AE6012 Air Traffic Control and Planning)

C412.4Make use of aerodrome data like aerodrome reference point, codes, elevation, temperature,

ILS, physical characteristics of runway and runway parameters.

C412.5Explain the navigation and other services such as VASI & PAPI, visual aids and other

indicating equipments.


C413.1 Explain preliminary design factor of aircraft wing

C413.2 Construct wing,spar,stringers

C413.3Apply the knowledge in designing of load distribution on an aircraft fuselage, bulk head and

longerons

C413.4Estimate the balancing & manuevering loads on tailplane,aileron,rudder in designing of

control surfaces.

C413.5 Compare the various type of landing gear design.


C414.1 Demostrate the procedures of aircraft jacking up and levelling.

C414.2 Take part in control system rigging checks and aircraft symmetry check.

C414.3 Test filter element clogging and hydraulic Internal/External leakage.

C414.4 Deteremine the operating pressure of fuel system and the brake load torque.

C414.5 Estimate the aircraft weights and locating C.G.


C415.1 Design to perform arithmetic & logical operations in microprocessor 8085

C415.2 Describe the binary coded conversion techniques

C415.3 Evaluate the basic logical operators in digital circuits

C415.4 Design an integrated circuit with the help of logical gates

COURSE NAME :C413 (AE6711 Aircraft Design Project - II)

COURSE NAME :C414 (AE6712 Aircraft System Laboratory)

COURSE NAME :C415 (AE6713 Flight Integration Systems and Control Laboratory)

C415.5 Test a system to perform stability analysis using MATLAB


C416.1 Apply the knowledge of buckingham theorem and dynamic similarities.

C416.2 Analyze the special problems of testing in subsonic,transonic,supersonic.

C416.3Estimate the flow angularities,uniformity and turbulance in supersonic and subsonic wind

tunnels.

C416.4 Study the various force measurement techniques and flow visualization techniques.

C416.5 Explain the importance of advanced wind tunnel techniques.


C417.1 Develop the knowledge of fluids through measurement systems.

C417.2 Study the operations and performances of subsonic, transonic, supersonic and special tunnels.

C417.3 Explain the prinicple of flow visualisation using various apparatus.

C417.4 Demonstrate the measurement of pressure, velocity, temperature in low and high speed flows.

C417.5 Study and estimate the error in experiments with special flows and uncertainty analysis.


C418.1Compare and classify the types of rockets and missiles with respect to Indian & International

scenario.

C418.2 Analyze the aerodynamics of rocket and missiles.

C418.3Examine the governing equations, trajectories and range and altitude respect to burn out

velocity.

C418.4 Explain the multistaging and control seperation along with trust vector control method.

C418.5 Apply the knowledge in stages and remote control of rockets missiles.

COURSE NAME :C419 (AE6015 Rockets and Missiles)

COURSE NAME :C416 ( AE6801 Wind Tunnel Techniques)

COURSE NAME :C418 (AE6014 Experimental Aerodynamics)


C419.1 Apply their knowledge of basic science and engineering fundamentals throughout the course

C419.2 Develop the ability to undertake problem identification, formulation and solution

C419.3Demonstrate an in-depth technical competence in at least one engineering discipline on both

experimental and software .

C419.4Demonstrate the ability to engage in design and to execute designs at an appropriate

professional standard

C419.5Develop the capacity to undertake lifelong learning,social, cultural, global and environmental

responsibilities of the professional Engineer

COURSE NAME :C421 (AE6811 Project Work)

KOMARAPALAYAM-637303 2013 Regulation AERO.pdfCO No Course Outcomes C101.1 Develop their basic...

Documents

Transcript of KOMARAPALAYAM-637303 2013 Regulation AERO.pdfCO No Course Outcomes C101.1 Develop their basic...