kmg

2008

Technical catalogue

1. INTRODUCTION 2

2. ISOLATION PROPERTY SERIES “PRELUDE” 3

3. REVIEW OF PROFILES - SERIES “PRELUDE” 5

5. PROFILES - SERIES “PRELUDE” 8

7. TYPES OF SECTIONS - SERIES “PRELUDE” 12

8. SECTIONS - SERIES “PRELUDE” 13

20. SECTIONS - SERIES “PRESTIGE” 41

21. DREINAGE - SERIES “PRESTIGE” 51

9. DREINAGE - SERIES “PRELUDE” 26

10. VENTILATION AND DREINAGE CANAL - SERIES “PRELUDE” 27

11. STEEL INTENSIFIER - SERIES “PRELUDE” 28

12. ALUMINIUM TRESHOLD FOR DOORS - SERIES “PRELUDE” 29

13. ACCESSORIES - SERIES “PRELUDE” 30

14. ISOLATION PROPERTY SERIES “PRESTIGE” 32

15. REVIEW OF PROFILES - SERIES “PRESTIGE” 34

17. PROFILES - SERIES “PRESTIGE” 37

18. PROFILES - SERIES “PRESTIGE Eco” 37

19. TYPES OF SECTIONS - SERIES “PRESTIGE” 40

22. VENTILATION AND DREINAGE CANAL - SERIES “PRESTIGE” 52

23. STEEL INTENSIFIER - SERIES “PRESTIGE” 53

24. ALUMINIUM TRESHOLD FOR DOORS - SERIES “PRESTIGE” 54

25. ACCESSORIES - SERIES “PRESTIGE” 55

26. ACCESSORIES FOR PVC PROFILES 56

27. NOTES 58

4. REVIEW OF PROFILES - SERIES “PRELUDE Eco” 6

6. PROFILES - SERIES “PRELUDE Eco” 9

16. REVIEW OF PROFILES - SERIES “PRESTIGE Eco” 35

2008

CONTENTS:

2008

INTRODUCTION KMG profile produced by ALTEST is a project between the Austrian, German and theBulgarian company “ALTEST”. The ALTEST plant was designed and built together withGerman and Austrian engineers entirely of contemporary materials under the strict controlof the “Greiner - Group” Company Institute. The staff was trained in “Greiner Extrusion-technik” plants and the lines were assembled by German and Austrian experts. ALTEST laboratory has at its disposal all the necessary instruments for testing the pro-files in compilance with the world quality requirments.Advantiges: In an air-conditioned building, the windows produced of KMG profiles may reduce the energy loss to 37%. The important selectuon of thermal conductivity factor is the material for windows profilesand the choice of glass. PVC Thermal Productivity is 0.14 Kcal/m^2hr. C, and that of aluminum175 Kcal/m^2hr.C. KMG profile are resistant to blows of 3 kg per 1 cm at room temperature of 23oC. European standarts for surface gloss. Excellent results at heating, mousture and noiseinsulation with three, four and six chamber systems. Structure that does not allow burning deformation, insensitive to the environment - does not contain lead, does not allowretaining water, does not allow retaining stains, dust - tested through Clean Control implementedby German PVC profiles producers. Resistant to seasonal changes, no need of painting and easy to assemble. ALTEST PVC profiles are protected against the attack of acids, alkali, soiling and salts.Resistant to corrosion when used in conditions of high temperature and humidity. KMG profiles, as a material, absorb water under 0.1%. Mostly, the double sealer and thespecial draining openings that prevent water penetration. ALTEST profiles have special formula for obtaining resistance at UV rays attack. They canstand long against exposure to strong sun, storms, draught, high humidity and suddenchanges of weather. Mostly, the windows have perfect insulation against dust, wind and rain - due to the double rubber insulation and welded corners. KMG profiles, with their specific non-vibrating material and thermally assembled corners,drastically reduce the outside noise. The average acoustic insulation of 22-25 dB wasachieved at 6 mm glass and 30 dB at glass-block, therefore, PVC windows are prederred forthe construction of hospitals, schools, office buildings. KMG profiles are easy to operate at any conditions because of their low thermal expansionfactor, which is 3x10^-5/degC/cm.

2008 3

ISOLATION PROPERTY

Isolation property of profilesfor series PRELUDE

2008 4

GLASS-HOLDER

GLASS-SEALANTS

SASH

CENTRAL RUBBER

FRAME

2008 5

SERIES PRELUDE

SCHEME CODE DIMENSIONSX/Y (ММ)

2008 6

SERIES PRELUDE Eco


S-482.20

S-482.19

S-482.23

S-482.24

S-482.21

60,0/68,0

60,0/78,0

60,0/95,0

60,0/70,0

60,0/84,0

2008


SERIES PRELUDE

S-482.15

S-482.14

E 3308 60,0/20,0

7

S-482.22 9.0/22,0

S-549.18

S-549.09 36,7/26,0

37,2/13,4

MULLIONCODE S-482.04

OVERHUNGCODE S-482.10

OVERHUNGCODE S-482.07

COUPLING PROFILE

CODE S-482.13

DOOR SASHCODE S-482.09

FRAMECODE S-482.06

FRAMECODE S-482.03

SASHCODE S-482.05

SASHCODE S-482.02

DOOR SASHCODE S-482.08

2008

SERIES PRELUDE58

,0

60,0

36,0

68,0

46,0

60,0

78,0

56,0

60,0

56,0

60,0

78,0

102,

0

124,

0

60,0

82,0

124,

0

60,0

84,0

60,0

71

63,4

6048

34

47,6

76,5

84

60

37 27

60

8

FRAMECODE S-482.20

SASHCODE S-482.19

SASHCODE S-482.23



2008

SERIES PRELUDE Eco

9

68

46

60

78

60

5673

95

60

2670

60

84

60

40

GLASS-HOLDER

S-482.22

S-549.09WALL CONNECTOR

COUPLING

ALUMINIUM DOOR-SILL

PIPE

COLUMN FOR 90 ANGLE

04-840ADDITION FOR PIPE

PANEL

04-842

WINDOW SILL

S-482.15

04-846

2008

SERIES PRELUDE

CODE

CODE

S-482.14

CODE

CODE

CODECODE

CODE

CODE

CODE

CODE

CODE

CODE

GLASS-HOLDER

10

37,2

13,4

26

36.7

E 3308

20

60

22

9

S-549.18

GLASS-HOLDER 24 mm

GLASS-HOLDER 24 mm

04-844

04-841

SECTIONS

2008 12

TYPES OF SECTIONS

2008 13

S-482.01

S-482.02S-482.19

S-482.01

S-482.20S-482.03

SECTIONS

S-482.02S-482.01

S-482.19

S-482.03S-482.20

2008 14

SECTIONS

2008 15

S-482.01

S-482.02S-482.19

S-482.03S-482.20

SECTIONS

S-482.02S-482.19

S-482.07

S-482.02S-482.19

2008 16

S-482.01

S-482.01

SECTIONS

2008 17

S-482.01

S-482.01S-482.02

S-482.02

S-482.10

S-482.19

S-482.19

SECTIONS

S-482.02S-482.01

S-482.19

S-482.04S-482.21

S-482.02S-482.19

2008 18

SECTIONS

S-482.03S-482.20

2008 19

SECTIONS

S-482.01S-482.08

S-482.03S-482.20

2008 20

SECTIONS

2008 21

S-482.01S-482.09

S-482.03S-482.20

SECTIONS

2008 22

Silikon

70

60

18.2

5885

143

15368

70

Silikon

S-482.06

S-549.01S-549.15

S-549.13

S-549.07

S-549.06

S-549.06

SECTIONS

2008 23

Silikon

70

139

7158

18.2

129

70

60

S-482.06

S-549.01S-549.15

S-549.08

S-549.13

SECTIONS

2008 24

60

88

60

116

S-482.06 S-482.06

S-54

9.18

S-482.06

04-84604-846

S-549.09

SECTIONS

2008 25

S-482.03

S-482.02S-482.19

S-482.20

04-844

04-844

S-482.01

S-482.01

SECTIONS

WATER DRAINAGES PRELUDE

262008

Ventilation and drainage canals

2008

SCHEME DRILLING OF VENTILATION AND DRAINAGE CANALS

Drainagecanals

Ventilationcanals

600 мм 600 мм

Profile

Glass

Opening

25

5

30-50

25 5

50

25

VISIBLE DRAINAGE CANAL

INVISIBLE DRAINAGE CANAL

Drainagecanals

Drainagecanals

Ventilationcanals

Ventilationcanals

600 мм 600 мм 600 мм 600 мм

Ventilationcanals

Drainagecanals

Ventilationcanals

Drainagecanals

Ventilationcanals

Ventilationcanals

Drainagecanals

Drainagecanals

600 мм 600 мм 600 мм 600 мм

600 мм 600 мм 600 мм 600 мм

27

2008 28

48.3

54

54

40

40

27

23.5

S-482.05 S-482.03S-482.20

S-482.02S-482.19

S-549.01S-549.15

S-549.02S-549.16

28.5

25

TRE 01

65

28.5 TRE 03

60

32

S-549.05

04-841

TRE 07

S-482.06

S-482.04 S-549.03S-549.17

30

24

TRE 02

TRE 10

TRE 09

TRE 06

TRE 08

S-549.04

S-549.07

S-549.08

12

45

TRE 04

S-482.10

28.5

20

TRE 05

30.0

10.0

TRE 12

TRE 11

S-482.08 S-482.09

24

TRE 13

TRE 14

TRE 15

TRE 16

S-482.24

S-482.1350

20

S-482.21

28.5

25

30

20

28.5

S-482.23

28.5

45.0

STEEL BOOSTERS

2008 29

SERIES PRELUDE

ALUMINIUM DOOR-SILL

17

7.2

10

Bol

t7,

5 x

60

Brus

hAl

umin

ium

doo

r-sill

Silic

one

Bolt

Invis

ible

gask

et

Mon

tage

leisn

for b

rush

Cove

ring

leisn

Putti

ng d

oor -

sill

2008 30

Universal gasket for glass,PAR-02

Universal gasket for glass,ALT-04

Cap for profile S-482.07


Central gasket NO-01

Putting for T of profile S-482.04

Cap for profile 04-846 (window sill)

ACCESSORIES PRELUDE

SERIES PRESTIGE

2008

ISOLATION PROPERTY

1. Section 11.1 Section 1_Psi БългарияМатериал PVC(2), Steel (3), Silicon foam, PU foam (10), PVC soft (11), EPDM(12),halfsulphid (13), glass ( 14), gas (15), butill (16), TPS (18).

T_cold= -15°C; T_warm = 20°C Alp_cold= 25 W/m2K; Alp_warm = 7,69 W/m2K L = 0,306 m; L_vis = 0,190 m; l_f = 0,116 m U_g = 1,1 W/m2K U_global = 1,38 W/m2K Psi = 0,0583 W/mK T_min_i = 7,6°C

Isolation property of profiles for series PRESTIGE

32

2008 33

S-549.10 GLASS HOLDER

GLASS SEALANTS

S-549.02 SASH

S-549.01 FRAME

34

SERIES PRESTIGE


2008

S-549.01

S-549.02

S-549.05

S-549.03

S-549.04

S-549.07

S-549.06

S-549.08

70,0/68,0

70,0/78,0

70,0/113,0

70,0/88,0

73,5/68,0

70,0/70,0

70,0/37,3

71,0/71,0

35

SERIES PRESTIGE Eco


2008

S-549.15

S-549.16

S-549.17

70,0/68,0

70,0/78,0

70,0/88,0

36

SERIES PRESTIGE


2008

S-549.18 37,2/13,4

75,0/25,0

04-846 200,0/27,0

04-844 108,0/20,0

S-549.09

E3309

26,0/36,7

S-549.10 26,5/22,0

S-549.13 8,9/24,7

2008

SERIES PRESTIGE

37

MULLIONS-549.03CODE

FRAMECODE S-549.01

SASHS-549.02CODE

DOOR SASHS-549.05CODE

46

70

68

56

70

78

91

70

11

3

70

88 40

73.5

68

OVERHUNGS-549.04CODE

MULLIONS-549.17CODE

FRAMES-549.15CODE

SASHS-549.16CODE

46

70

68

56

7078

70

88 40

PRESTIGE PRESTIGE Eco

2008

SERIES PRESTIGE

38

ADDITION FOR PIPES-549.06CODE

PIPES-549.07CODE

ALUMINIUM DOOR SILL

CODE E3309

24.9

70

37.3

70

56.321.3

25

7511

.8

S-549.08COLUMN FOR 90 ANGLE

CODE

04-846WINDOW SILLCODE

S-549.13CLIPCODE

GLASS HOLDERCODE S-549.10

71

71

2226.5

200,0

27,0

20,0

PANEL

04-844CODE

100,0

108,0

20,0

13,4

37,2

8.9

24.7

26

36.7

COUPLINGS-549.18CODE

WALL CONNECTOR

S-549.09CODE

SECTIONS

2008 40

TYPES OF SECTIONS

2008 41

2.53.5

3.5 2.5

30

24

30

24

S-549.10

S-549.01

S-549.10

S-549.02

S-549.15

S-549.16

SECTIONS

2008 42

Backset 15

3.5 2.5

24

15

116

12

13

86

S-549.10

S-549.02S-549.16

S-549.01S-549.15

SECTIONS

2008 42

BSW2015

3.5 2.5

24

116

12

38

1686

S-549.10S-549.02

S-549.01

S-549.16

S-549.15

SECTIONS

2008 44

3.5 2.5

Silikon

164

68 8

12

15

86

S-549.10S-549.02

S-549.02

S-549.04

S-549.16

S-549.16

SECTIONS

2008 45

13

Backset 15

3.5 2.5

Backset 15

184

88

127

15

28

86

S-549.10

S-549.10

S-549.02

S-549.02

S-549.03S-549.17

S-549.16

S-549.16

SECTIONS

2008 46

Backset 45

13

3.5 2.5

24

26.3

36.5 45

151

12

86

S-549.10S-549.05

S-549.01S-549.15

SECTIONS

2008 47

Dr.Hahn

3.5 2.5

24

151

38

8616

S-549.10S-549.05

S-549.01S-549.15

SECTIONS

2008 48

Silikon

Silikon

70

153

85

153

70

68

S-549.01S-549.15

S-549.01S-549.15

S-549.07

S-549.06

S-549.06

SECTIONS

2008 49

Silikon

139

70

6871

139

70

S-549.01S-549.15

S-549.01S-549.15

S-549.08

SECTIONS

2008 50

70

13698

70

S-549.01

S-54

9.18

S-549.01

S-549.01

04-846 04-846

S-549.09

SECTIONS

WATER DRAINAGES PRESTIGE

51

Ø5

22.5

5.3

Ø5

40°

S-549.01

5.3

Ø5

40°

S-549.02

40°

Ø5

46.9

5.3

Ø5

S-549.0340°

5.3

Ø5

S-549.05

40°

Ø5

46.9

5.3

Ø5

S-549.17

2008

Ventilation and drainage canals

2008

Drainagecanals

Ventilationcanals

600 мм 600 мм

Profile

Glass

Oppening

25

5

30-50

25 5

50

25

VISIBLE DREINAGE CANAL

HIDDEN DREINAGE CANAL

Drainagecanals

Drainagecanals

Ventilationcanals

Ventilationcanals

600 мм 600 мм 600 мм 600 мм

Ventilationcanals

Drainagecanals

Ventilationcanals

Drainagecanals

Ventilationcanals

Ventilationcanals

Drainagecanals

Drainagecanals

600 мм 600 мм 600 мм 600 мм

600 мм 600 мм 600 мм 600 мм

52

SCHEME FOR DRILLING OF VENTILATION AND DRAINAGE CANALS

2008 53

48.3

54

54

40

40

27

23.5

S-482.05 S-482.03S-482.20

S-482.02S-482.19

S-549.01S-549.15

S-549.02S-549.16

28.5

25

TRE 01

65

28.5 TRE 03

60

32

S-549.05

04-841

TRE 07

S-482.06

S-482.04 S-549.03S-549.17

30

24

TRE 02

TRE 10

TRE 09

TRE 06

TRE 08

S-549.04

S-549.07

S-549.08

12

45

TRE 04

S-482.10

28.5

20

TRE 05

30.0

10.0

TRE 12

TRE 11

S-482.08 S-482.09

24

TRE 13

TRE 14

TRE 15

TRE 16

S-482.24

S-482.1350

20

S-482.21

28.5

25

30

20

28.5

S-482.23

28.5

45.0

STEEL BOOSTERS

2008 54

9

17

17

7.2

10

7.5

Bolt

7,5

x 60

25

Silic

on

Alum

inium

door

sill

Brus

h

Bolt

Invisi

blega

sket

Monta

ge la

isnfor

brus

h

Cove

rage

laisn

Сгло

бка в

рата

- пр

аг

Series PRESTIGE

ALUMINIUM DOOR-SILL

2008 55

Universal gasket for glass,PAR-02

Universal gasket for glass,ALT-04


Putting T for profile S-549.03

Putting T for profile S-549.17

Cap for profile 04-846 (window sill)

ACCESSORIES PRESTIGE

2008 56

ACCESSORIES

Cap for drainage

Cap for technological opening F 12 мм

Fixer for glass

Stages lamella20 мм 24 мм26 мм30 мм

Padding:2 мм3 мм4 мм5 мм

Angle:18 мм24 мм32 мм

Angle for door

Equalise padding for frame

2008 57

ACCESSORIES

Opposite KMG

Closing mechanism for two-folding windowwith opposite

Closing mechanism for two-folding window

Opposite for door (regulatable big)

Opposite for door (regulatable small)

Opposite for door

Closing mechanism forbalcony door

NOTES

582008

ALTEST LTDBulgaria, Bourgas 8000tel: 00359/56/88 04 40fax: 00359/56/88 04 43email: [email protected]

www.altest-kmg.com

kmg

Documents

Transcript of kmg