KmB - VersaDrill · PDF fileKmB.4s SURFACE DRILL Filtration 10 micron absolute filter on...

KmB.4sLightweight, small size and high performance

FEATURES AND BENEFITS• Surface version

• Made of steel

• Depth capacity: 1 300 ft (400 m)

• Total weight w/o pump | tank: 5 354 lb (2 429 kg)

SPECIFICATIONSRotary head and rod holderHolding capacity 28 000 lb (12 700 kg)

Spindle interior dimension 4.9" (124 mm) PWL Rod

Chuck operation Spring closed and hydraulically opened

Final drive HV-60-2 chain in an oil bath

Hydraulic Motor 80 cc variable

Transmission HI-LO 2 speeds

Rotary Head Ratio 1:2

Lubrication Pump pressurized, filter and cooler

Speed 0 to 1300 RPM

KmB.4sSURFACE DRILL

Filtration10 micron absolute filter on return line

High pressure filter

One strainer inside the hydraulic tank connected to the suction

Hydraulic moduleFloating rotary head Ñ Torque limit on rotary head

Hydraulic pump 65 US gal/min (246 l/min) @ 1 800 RPM (max 4 000 psi (275 bar)

System drive Open loop, Load-sensing circuit

Hydraulic pressurized tank 34 US gal (128 l)

Oil heat exchanger Water cooling (Air cooler optional)

WeightDiesel power unit 1 200 lb (545 kg)

Hydraulic pump and tank 584 lb (365 kg) dry 884 lb (400 kg) wet

Control panel 250 lb (113 kg)

Drill head 550 lb (249 kg)

Drill head hydraulic motor 70 lb (32 kg)

Drill head transmission 85 lb (39 kg)

Rod holder 254 lb (115 kg)

Feed frame (extension and pulley included)

715 lb (324 kg)

Mast base 446 lb (202 kg)

Wireline 100 lb (45 kg)

Hydraulic hoses 800 lb (363 kg)

Feed frameHead stroke 6 ft (1,83 m)

Raising speed 300 ft/min (91 m/min)

Lowering speed 300 ft/min (91 m/min)

Pull capacity 12 500 lb (5 670 kg) @ 4 000 psi

Push capacity 7 000 lb (3 175 kg) @ 4 000 psi

Possible angle -8 to 90 degrees

Wireline hoistCable capacity (3/16 in - 4.8 mm) 1 500 ft (457 m)

Empty Pull capacity 2 000 lb (907 kg)

Full Pull capacity 650 lb (295 kg)

Variable speed as needed

Surface mastPull speed 400 ft/min (121 m/min)

Speed of descent 780 ft/min (237 m/min)

Single line pull capacity 6 500 lb (2 950 kg) @ 4 000 psi

Rod pull length 10 ft (3 m)

Drilling capacity

*Recommended size for maximum performance

*B 2 3/16" (55,6 mm) 1 300 ft (400 m)

*N 2 3/4" (69,9 mm) 655 ft (200 m)

H 3 1/2" (88,9 mm) 180 ft (55 m)

H casing 4 1/2" (14,3 mm)

98 ft (30 m)

Drilling capacity is calculated on a 90 degree down hole and will depend on in-hole tools, ground conditions, drilling techniques and equipment used.

Recommended diesel engine: 125 HP (126,75 Kw) at 2 000 RPM

2-Speed transmissionSpeed Ratio RPM Maximum Torque

LO 3.46:1 0-361 2 098 lb*ft (2 840 N*m) @ 361 RPM

HI 1:1 0-1 300 606 lb*ft (820 N*m) @ 1 300 RPM

Speed and torque based on a 80 cc hydraulic motor at 4 000 psi (275 bar)

THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF

VERSADRILL. ANY REPRODUCTIONIN PART OR AS A WHOLE

WITHOUT THE WRITTEN PERMISSION OFVERSADRILL IS PROHIBITED.

Page 1 de 1POIDS:Échelle: 1:16

KmB_4S_Pixi

TITRE:

Dernier enregistrement par: Steven (1 février 2012 14:12:31)

crée le: 27 janvier 2012

PROPRIETARY AND CONFIDENTIAL

Concepteur (VersaDrill Canada):

Procédé:

Type matière:No & description matière:

DESSIN NO.# prog:

60824

180871

79831





KmB_4S_Pixi

TITRE:





Procédé:


DESSIN NO.# prog:

6250246 EXTRACTED

4392173 RETRACTED

49520

110343

87634





KmB_4S_Pixi

TITRE:





Procédé:


DESSIN NO.# prog:

243896

233092

91236

135253

99139

163564

102140

Versadrill Canada reserves the right to make modifications without notice.

DIMENSIONS

240, rue Gilbert-Bosse, Val-d’or, QC, Canada J9P 0H4

1 819 874-4404 [email protected]

versadrillcanada.com

Distributor:

Field experience, Real experience.

Printed in Canada. March 2016.

KmB - VersaDrill · PDF fileKmB.4s SURFACE DRILL Filtration 10 micron absolute filter on...

Documents

Transcript of KmB - VersaDrill · PDF fileKmB.4s SURFACE DRILL Filtration 10 micron absolute filter on...