KITCHEN ORGANIZERS...TE 5095351663 TOREE 800.888.1663 179 T O C 5095351663 8008881663 Waste and...
Transcript of KITCHEN ORGANIZERS...TE 5095351663 TOREE 800.888.1663 179 T O C 5095351663 8008881663 Waste and...
TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 177
To Order – Call 509.535.1663 or 800.888.1663W
aste and Recycling ContainersKITCHEN ORGANIZERS
Kitchen Organizers ..................177-216
Waste and Recycling Containers .......... 177-183 Sensomatic Assisted Opening System ....................................... 183
Base & Pull Out Organizers .................... 184-187
Woven Pull Out Baskets ................................. 187
Wall / Upper Cabinet Organizers .................. 188
Lazy Susans / Corner Cabinetry ............ 189-198Lazy Susan Hardware and Swivel Bearings ...................... 189-190
Full Circle Lazy Susans ............................................................. 190-193
D-Shape Lazy Susans ........................................................................ 193
Kidney Lazy Susans .................................................................. 194-195
Pie-Cut Lazy Susans ........................................................................... 196
Blind Corner Lazy Susans ....................................................... 197-198
Pantry Organizers / Blind Corner .......... 197-200
Door Storage and Spice Racks .............. 201-202
Drawer Organizers / Cutlery Trays ........ 202-205
Sink Front Tip Out Trays ......................... 205-208 Tip Out/False Front Tray Hinges ........................................... 205-208
False Front Tray Clips ......................................................................... 208
Tray Dividers ..................................................... 209
Wine, Stemware and Plate Racks .......... 210-211
Appliance Garages .......................................... 212
Wood Tambour and Track Systems ...... 212-213
Wood Breadboards & Slides .......................... 214
Mixer Lifts ................................................. 214-215
Pull-Out Towel Bars ......................................... 215
Undersink Drip Trays....................................... 216
Cabinet Louver / Ventilator ...................216, 248
Hidden waste containers, pull out organizers, pantry storage with soft close too. Our selection of kitchen organizers can turn a basic kitchen from drab to fab with just a few convenient upgrades!
178 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERSW
aste and Recycling Containers
Waste and Recycling Containers
Pull-Out Waste ContainersVibo Series
New Item!• Soft-close, full-extension slides; bottom mount.• Patented door-mount bracket system has 3 way adjustability for align-
ment of the cabinet door. Vertical, lateral and frontal adjustment.• Waste container equipped with handle to keep your bag inside and lift
cans up.• 100% made in Italy.• Silver gray bins & chrome hardware.• 1/box. Sold individually.
Product # Bins/Quarts Width Depth Height
QPAM12135C 1/35 Qt. 12” 19-5/8” 21-7/8”
QPAM15228C 2/32 Qt. 15” 19-5/8” 21-7/8”
QPAM18228C 2/32 Qt. 18” 21-5/16” 20-5/16”
QPAM21235C 2/35 Qt. 21” 21-5/16” 20-5/16”
Replacement Waste Container BinsVibo Series
New Item!• Waste container equipped with handles for easy gripping and fixing the
bag along the perimeter of the bin.• Silver gray polystyrene.• 1/box. Sold individually.
Product # Size Height Width Depth
QPAM128C 32 Qt. 18-1/8” 8-5/8” 14-3/8”
QPAM135C 35 Qt. 18-1/8” 8-5/8” 17-1/4”
Waste Container LidVibo Series
New Item!• A practical lid with dishwasher safe anti-smell filter.• For use with Salice Vibo waste containers.• Gray/Silver.• 1/box. Sold individually.
Product # Description Width Depth
QPCOLAMF for 32 Qt. 8-5/8” 14-3/8”
QPCOXLMF for 35 Qt. 8-5/8” 17-1/4”
Waste Container Further BinsVibo Series
New Item!• Salice Vibo “Further Bins” can be put inside the principal bins on waste
container units or also used externally attached to the cabinet door.• Silver gray polystyrene bins with small handle.• 1/box. Sold individually.
Product # Bins/Quarts Width Depth Height
QPAM03C 1/3.2 Qt. 7-23/32” 7-7/8” 3-9/16”
QPAM05C 1/5.3 Qt. 7-23/32” 7-7/8” 7-3/32”
TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 179
To Order – Call 509.535.1663 or 800.888.1663W
aste and Recycling ContainersKITCHEN ORGANIZERS
Undermount Waste ContainersUSC Series
• Heavy-duty undermount slides with soft-close technology.• Unique, washable solid backsplash and floor for easy cleaning.• Concealed slide hardware.• Optional decorative rail accents may be customized to match counter-
tops.• Optional lids fit securely and hold bags in place• Installs in minutes with self-aligning brackets and only four screws.• New door mount brackets accommodate overlay or inset doors.• 1/box. Sold individually.
Product # Bins/Quarts Width Depth Height Color
USC12-1-50WH 1/50 Qt. 12” 22-7/16” 23-5/16” White
USC15-2-35PT 2/35 Qt. 14-13/16” 22-5/8” 19-5/16” Silver
USC18-2-50PT 2/50 Qt. 15-3/8” 22-7/16” 23-1/4” Silver
Waste Container Lid OnlyUSC Series
• For use with the Knape and Vogt Series 35qt. waste containers (sold separately).
• Conceals waste and traps odors inside the waste bin.• Lid adds 3/4” (19mm) to bin height.• 1/box. Sold individually.
Product # Description Color
QT35LB-PT for 35 Qt. Silver
Door Mount Waste Containers5149 Series
• Features Rev-A-Motion™ Soft-Open/Soft-Close slide technology that provides smooth operation even under the heaviest of loads.
• Easy to clean durable molded base.• Made in the USA.• Adjustable door mount brackets fits all door types and allows tilt and
skew.• Silver bins with aluminum hardware.• 1/box. Sold individually.
Product # Bins/Size Width Depth Height
Min.Opening Frameless
5149-15DM-117 1/35 Qt. 12-1/8” 22” 19-1/2” 12-1/4”W
5149-15DM18-117 1/35 Qt. 12-1/8” 18” 19-1/2” 12-1/4”W
5149-1550DM-117 1/50 Qt. 12-1/8” 22” 23-1/2” 12-1/4”W
5149-1527DM-217 2/27 Qt. 12-1/8” 22” 19-1/2” 12-1/4”W
5149-18DM-217 2/35 Qt. 14-3/16” 22” 19-1/2” 14-1/2”W
5149-2150DM-217 2/50 Qt. 15-5/8” 22” 23-1/2” 15-3/4”W
Door Mount Waste Containers5349 Series
• Heavy-duty brushed aluminum soft-closing slides provide exceptional support and stability eliminating side-to-side movement and a fully adjustable 10” H door mount frame.
• White bins with aluminum hardware.• Built-in rear storage area for bags on single container units.• 1/box. Sold individually.
Product # Bins/Size Width Depth Height
5349-15DM-1 1/35 Qt. 10-3/4” 21-15/16” 19-1/4”
5349-1550DM-1 1/50 Qt. 10-3/4” 21-15/16” 23-1/8”
5349-18DM-2 2/35 Qt. 14-13/16” 21-7/8” 19-1/4”
5349-1527DM-2 2/27 Qt. 11-11/16” 22-1/4” 18-15/16”
5349-2150DM-2 2/50 Qt. 14-13/16” 22-1/8” 22-1/8”
180 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERSW
aste and Recycling Containers
Door Mount Extender Kit5349 Series
• Designed for Rev-A-Shelf’s 5349 Series aluminum frame pull-outs.• Made to be used on a product that might fall in a thin, delicate, or
seamed area of the cabinet door.• Attaches to the existing door bracket for extended mounting adjustabil-
ity for any cabinet door style where previously a sub-door might have been required.
• Allows for 3/4” to 2-1/2” of adjustment per side.• 1/box. Sold individually.
Product # Finish
5345-DM-KIT-1 Chrome
Bottom Door Mount Waste Containers4WC Series
• Solid maple construction. Containers encased in a durable wood base to allow easy retrieval of the waste bins
• Features 150lb. full-extension, ball bearing slides with pre-assembled door mount brackets.
• White bins.• 1/box. Sold individually.
Product # Bins/Size Width Depth Height
4WC-15DM-1 1/35 Qt. 11-1/4” 21-3/4” 19-1/4”
4WC-18DM-2 2/27 Qt. 14-1/4” 21-3/4” 19-1/4”
Top Mount Soft-Close Waste Container4WCTM-BBSC Series
• 1-1/2” over-travel soft-close ball-bearing slides.• Single 35qt. includes rear polymer storage bin.• Innovative floating rear bracket ensures soft-close functionality even
when your cabinet wood swells or shrinks.• Pre-assembled door mounting brackets.• Silver bins.• 1/box. Sold individually.
Product # Bins/Size Width Depth Height
4WCTM-12BBSCDM-1 1/35 Qt. 12” 22-3/4” 17-7/8”
4WCTM-1550BBSCDM1 1/50 Qt. 12” 23-1/4” 21-3/4”
4WCTM-15BBSCDM-2 2/27 Qt. 12” 23-1/4” 17-3/4”
4WCTM-18BBSCDM-2 2/35 Qt. 15” 22-3/4” 17-7/8”
4WCTM-2150BBSCDM2 2/50 Qt. 18” 23-1/4” 21-3/4”
Top Door Mount Waste Containers4WCTM Series
• Designed for 1-1/2” face frame cabinets.• Solid maple construction.• 1-1/2” over-travel ball-bearing slides.• Single container units include rear polymer storage bin.• Adjustable rear brackets for cabinet depth variations.• Pre-assembled door mounting brackets.• White bins.• 1/box. Sold individually.
Product # Bins/Size Width Depth Height
4WCTM-12DM-1 1/35 Qt. 12” 22-3/4” 17-7/8”
4WCTM-1550DM-1 1/50 Qt. 12” 23-1/4” 21-3/4”
4WCTM-15DM-2 2/27 Qt. 12” 23-1/4” 17-3/4”
4WCTM-18DM-2 2/35 Qt. 15” 22-1/2” 17-7/8”
4WCTM-2150DM-2 2/50 Qt. 18” 23-1/4” 21-3/4”
TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 181
To Order – Call 509.535.1663 or 800.888.1663W
aste and Recycling ContainersKITCHEN ORGANIZERS
Quad Recycle Center4WCTM Series
• Designed for 1-1/2” face frame cabinets.• Solid maple construction.• 1-1/2” over-travel ball-bearing slides.• Adjustable rear brackets for cabinet depth variations.• Pre-assembled door mounting brackets.• White bins.• 1/box. Sold individually.
Product # Bins/Size Width Depth Height
4WCTM-27-4 4/27 Qt. 24” 23-1/4” 18”
Spacer Kit For Face Frame Applications4WCTM Series
• For use with Rev-A-Shelf 4WCTM Waste containers.• Used in face frame applications, for custom installations it will add up to
1-1/2” (38mm) of width.• 1/box. Sold individually.
Product #
4WCTM-SP-KIT
Recycle Center w/Soft-Close5BBSC Series
• Beautiful chrome frame, white bins.• Features full-extension soft-close ball-bearing slides.• Removable containers for easy cleaning.• Includes door mount brackets for attaching your own door.• Set Contents: 3 - 25qt. polymer containers, 1 canvas bag, full extension
150lb. slides, door adjustment mechanism; spring loaded self closing feature.
• 1/box. Sold individually.
Product # Width Depth Height
5BBSC-WMDM24-W 20” 22-1/4” 20-1/4”
Recycling CenterPRC24 Series
• Features KV heavy-duty ball-bearing slides.• Slides assembly: 23-3/8”W,.• 25lbs. max per bin, not intended for bulk storage.• White bins and hardware.• 1/box. Sold individually.
Product # Bins/Size Width Depth Height
PRC24-4-27-W 4/27 Qt. 24” 23” 19”
182 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERSW
aste and Recycling Containers
Single Pull-Out Waste ContainersRV Series
• Sturdy wire support structure and high quality vinyl coating.• 3/4 or full-extension polymer bearing slide assembly; S-suffix denotes
full extension slides.• Fully assembled for ease in installation.• White bins and hardware.• 1/box. Sold individually.
Product # Bins/Size Width Depth Height
RV-814PB 1/20 Qt. 8-1/2” 14-5/8” 16-5/8”
RV-9PB 1/30 Qt. 9-1/2” 22” 19-1/4”
RV-12PB 1/35 Qt. 10-5/8” 22” 19”
RV-12PB-L 1/35 Qt. 10-5/8” 22” 20-3/8”
RV-12PB-50-S 1/50 Qt. 10-3/4” 22” 24-1/4”
RV-14PB-S 1/20 Qt. 14-5/8” 16” 16-3/8”
RV-18PB-1 1/35 Qt. 14-3/8” 22” 19-1/4”
Double Pull-Out Waste ContainersRV Series
• Sturdy wire support structure and high quality vinyl coating.• Full-extension polymer bearing slide assembly.• Fully assembled for ease in installation.• White bins and hardware.• 1/box. Sold individually.
Product # Bins/Size Width Depth Height
RV-15PB-2S 2/27 Qt. 11-13/16” 22-1/4” 19-1/8”
RV-18PB-2S 2/35 Qt. 14-3/8” 22” 19-1/4”
Heavy-Duty RV Door Mount KitRV Series
• Door Mounting Kit for Rev-A-Shelf RV Series/HPRV/HRV Hampers.• Six-way adjustable door mounting bracket for easy installation and
simple job site adjustments.• Includes a complete set of brackets, fasteners and spacers for installation
on any door style.• White finish.• 1/box. Sold individually.
Product # Description
RV-DM-KIT Door Mount Kit
RV-EURO-ADAPTOR Adapter for RV-814PB
Waste Container LidsRV Series
• Rev-A-Shelf flip-up lids for the most popular waste containers.• Will add 1” to the height of product you are using. Be sure to take this
dimension into account when measuring your cabinet.• 1/box. Sold individually.
Product # Description Color
RV-35-LID-1 for 35 Qt. White
RV-35-LID-17-1 for 35 Qt. Silver
RV-50-LID-1 for 50 Qt. White
RV-50-LID-17-1 for 50 Qt. Silver
TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 183
To Order – Call 509.535.1663 or 800.888.1663W
aste and Recycling ContainersKITCHEN ORGANIZERS
Replacement Waste Container Bins
• Replacement bins for Rev-A-Shelf waste containers.• Finish: White.• 1/box. Sold individually.
Product # Size Use with Height Width Depth
6700-61-52 30 Qt. RV-9 18” 9-1/2” 15-3/8”
RV-1024W-52 27 Qt. RV-15, 4WCTM-15, 4WCTM-27 17-3/4” 11-3/8” 11-3/8”
RV-20-52 20 Qt. RV-8, RV-14 15” 8-1/8” 14-1/4”
RV-35-52 35 Qt. RV-12, RV-18, 5149, 4WCTM 17-7/8” 14-3/8” 10-1/2”
RV-50-52 50 Qt, RV, 4WCTM, 5149, 5349 21-3/4” 10-3/4” 14-3/4”
Undersink Mount Waste Containers8-785 Series
• Ideal for kitchen, vanity and wet bar sink base cabinets, fits conveniently in the limited spaces around existing plumbing.
• Features two separate stainless steel containers (one 10 liter and one 20 liter bin), a covered lid, built-in handles for easy removal and 75lb. full-extension ball bearing slides.
• Brushed stainless steel bins.• Minimum Cabinet Opening: 12” (305mm)W.• 1/box. Sold individually.
Product # Width Depth Height
8-785-30-2SS 10-1/4” 18-3/4” 15-3/16”
8-785-30-DM2SS 10-1/4” 18-3/4” 15-3/16”
Pivot-Out Waste Container8-010 Series
The pivot out waste container is ideal for keeping garbage out-of-sight yet conveniently accessible under the kitchen or vanity sink. As the cabinet door opens, the lifting mechanism raises the lid enabling the container to pivot-out with the door• Features an inner polymer container with built-in handle for easy
removal.• Designed for frameless cabinets. If using on a face frame cabinet you will
need to place a spacer behind the unit.• Stainless steel bin.• Minimum Cabinet Opening: 13-3/4in.(350mm)W• 1/box. Sold individually.
Product # Bin Size Width Depth Height
8-010314-15 15 Liter 11” 10-1/2” 15-3/4”
Grass Sensomatic Electronic Assisted Opening System
Grass Sensomatic electronically-assisted opening mechanism for waste bin application. With the touch-sensitive Sensomatic device all you need is a gentle touch anywhere on the front of the drawer to automatically open the drawers. The action is steady, precise and ingenious.
• Set includes: (1) Opening unit, (1) Base frame, (1) Power supply unit, (1) Power cord: (4) Front bumpers (F121100296223).
• Can be used with the Grass DWD-XP drawer systems, Rev-A-Shelf 5149/5349 Series Waste Pull-Outs and Blum Tandum.
• Opening system only, Pull-Out Waste bins not included.• 1 set/box. Sold per set.
Product #
F121100698201
184 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERSBase O
rganizers and Pull Out Baskets
Base Organizers and Pull Out Baskets
Pull-Out Base Organizer with Soft Close448 Series - Wood Classics
• Concealed, Blumotion soft-close slide design.• Adjustable rear wall that prevents items from falling behind the pullout.• Adjustable shelves with chrome rails.• Micro-adjustment screw for precise door alignment.• Adjustable door mount brackets provide up to 5 inches of flexibility for
trouble-free installation on any door style.• Adjustable rub bushings prevents side-to-side movement.• Made from maple with a UV clear coated finish.• 1/box. Sold individually.
Product # Width Depth Height
448-BCSC-5C 5” 21-3/4” 25-1/2”
448-BCSC-8C 8” 21-3/4” 25-1/2”
Pull-Out Base Organizer448 Series - Wood Classics
• Designed for full-height, face frame base cabinets.• Features adjustable shelves with chrome rails.• 100-150lb. full-extension, patented “tri-slides” for complete stability and
easy installation.• Adjustable door mount brackets provide up to 5 inches of flexibility for
trouble-free installation on any door style.• Made from maple with a UV clear coated finish.• 1/box. Sold individually.
Product # Width Depth Height
448-BC-5C 5” 22-1/2” 25-1/2”
448-BC-8C 8” 22-1/2” 25-1/2”
448-BC-11C 11” 22-1/2” 25-1/2”
Base Cabinet Filler Organizer432 Series - Wood Classics
This pull-out organizer transforms decorative filler panels into functional storage space.• Adjustable shelves with chrome rails.• 100lb. full-extension, tri-slide design for complete stability and easy
installation.• Made from maple with a UV clear coated finish.• 1/box. Sold individually.
Product # Width Depth Height
432-BF-3C 3” 23” 30”
432-BF-6C 6” 23” 30”
432-BF-9C 9” 23” 30”
KitchenMate Base Pantry Filler
• Simply installs between adjacent cabinets to provide valuable storage space.
• Features KV 8405 100lb heavy-duty full extension ball bearing slides with adjustable shelves.
• Unique magnetic push latch, ours don’t pull out, they push in.• Solid maple and plywood construction.• 1/box. Sold individually.
Product # Width Depth Height
P0463MNL1 3” 22-7/8” 30”
P0466MNL1 6” 22-7/8” 30”
TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 185
To Order – Call 509.535.1663 or 800.888.1663Base O
rganizers and Pull Out Baskets
KITCHEN ORGANIZERS
Single Pull-Out Basket5-WB1 Series
• Ideal for organizing your valuable pots, pans and other bulky items!• Features 100lb. full-extension, ball-bearing slides and heavy-duty chrome
plated frame.• Slide unit installs easily with only 4 screws.• Optional door mount brackets available.• Finish: Chrome.• 1/box. Sold individually.
Product # Width Depth Height Min.Opening
5WB1-0918-CR 8-3/8” 18” 7” 8-1/2”
5WB1-1218-CR 11-3/8” 18” 7” 11-1/2”
5WB1-1220-CR 11-3/8” 20” 7” 11-1/2”
5WB1-1222-CR 11-3/8” 22” 7” 11-1/2”
5WB1-1520-CR 14-3/8” 20” 7” 14-1/2”
5WB1-1522-CR 14-3/8” 22” 7” 14-1/4”
5WB1-1822-CR 17-3/8” 22” 7” 17-1/2”
5WB1-2122-CR 20-3/8” 22” 7” 20-1/2”
Double Pull-Out Baskets5WB2 Series
• Ideal for organizing your valuable pots, pans and other bulky items!• Features 100lb. full-extension, ball-bearing slides and heavy-duty
chrome plated frame.• Slide unit installs easily with only 4 screws.• Optional door mount brackets available.• Finish: Chrome.• 1/box. Sold individually.
Product # Width Depth Height Min.Opening
5WB2-0918-CR 8-3/4” 18” 19” 8-1/2”
5WB2-1218-CR 11-3/4” 18” 19” 11-1/2”
5WB2-1222-CR 11-3/4” 22” 19” 11-1/2”
5WB2-1522-CR 14-3/4” 22” 19” 14-1/2”
5WB2-1822-CR 17-3/4” 22” 19” 17-1/2”
5WB2-2122-CR 20-3/4” 22” 19” 20-1/2”
Door Mount Kit for 5WB Baskets5WB Series
• This kit can be added to all Rev-A-Shelf 5WB-Series pull-out baskets to make units door mountable.
• The two piece bracket allows for easy installation and simple job site adjustments.
• Flexible mounting eliminates need for sub-door.• 1/box. Sold individually.
Product # Finish
5WB-DMKIT Silver
Pull-Out Base Organizer548 Series
• Designed for 9” base cabinets.• Universal brackets, reversible for non-handed operation.• Ball-bearing slides and door mountable frame.• Mounting screws and spacers included for slides.• Finish: chrome.• 1/box. Sold individually.
Product # Width Depth Height
548-06CR 5-1/2” 19-3/4” 19-1/2”
548-10CR-1 9-3/4” 16” 18”
186 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERSBase O
rganizers and Pull Out Baskets
Wood Pull-Out Drawer4WDB Series - Wood Classics
• Dovetail construction and maple veneer plywood for strength and a naturally beautiful finish.
• Simple installation and concealed bottom mount, 50lb, 3/4 extension euro slides.
• 1/box. Sold individually.
Product # Width Height Depth
4WDB-12 11” 5-5/8” 18-1/2”
4WDB-15 14” 5-5/8” 22-1/2”
Under Sink BasketUSB Series
• Features a unique, two-tier design.• Accessory top basket is non-handed, removable and offset to avoid
plumbing for undersink applications.• Note: Add 3/4” (19mm) to width requirement for frameless cabinets.• Finish: White.• 1/box. Sold individually.
Product # Width Depth Height
USB11TM-W 12-1/8” 19-1/8” 9-5/16”
USB14TM-W 15-1/8” 19-1/8” 9-5/16”
Undersink Basket w/Removable Caddy544 Series
• Adjustable handle that slides either direction to work around plumbing or other obstructions.
• Reversible/removable top tray is ideal for paper towel or sponge storage.• Completely removable to take cleaning products with you.• Leak proof trays.• Finish: Chrome.• 1/box. Sold individually.
Product # Width Depth Height
544-10C-1 11-1/4” 16-1/4” 19-1/2”
Pull-Out Vanity Grooming Organizer445 Series - Wood Classics
• Great for organizing hair dryers, curling irons and other grooming items.• 100lb. full-extension, tri-slides for complete stability and easy installation.• Includes pull-out shelving system, 2 adjustable shelves with stainless
steel bins, adjustable door mount brackets, full extension tri-slides, rub bushings.
• All natural wood finish.• 1/box. Sold individually.
Product # Width Depth Height
445-VCG25-8 8” 19” 25-1/2”
TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 187
To Order – Call 509.535.1663 or 800.888.1663W
icker/Rattan Pull Out Baskets
KITCHEN ORGANIZERS
Glideware Pull-Out Rack with Hooks
• Keeps cabinets organized and eliminates clutter.• Solid, clear maple body and 7 solid metal, custom-made hooks.• Gliding hardware designed with a 100 lb. capacity.• Weighted hooks and synchronized motion keeps cookware quiet.• Designed to fit any standard depth cabinet - installation in a full height
cabinet is recommended to hang larger cookware.• Top of unit to bottom of hooks: 5”.• Rear mounting bracket (for face frame installation) will add 3/4” to overall
length.• Lifetime Warranty.• 1/box. Sold individually.
Product # Length Width Height Finish
GLDWR7HK 22” 4-1/4” 3” Clear Maple
Hooks for Glideware
• Solid metal, custom-made, weighted hooks designed to fit the Glideware Racks.
• 1 pr/box. Sold per pair.
Product # Finish
GLDWR2HK Satin Nickel
Bottom Mount Slides for Custom Pull-Outs
• Heavy-duty ball-bearing bottom mount slides.• White, 100lb. load rating.• 1 pr/box. Sold per pair.
Product # Length
BM-3832-18W-52 18”
BM-3832-20W-52 20”
BM-3832-22W-52 22”
Wicker/Rattan Pull Out Baskets
Rev-A-Shelf Woven Basket with Rails
Bring a natural look to your design with beautiful woven baskets. Perfect for storing fruit, vegetables and much more!• Machine washable canvas liner.• Baskets secured within a natural maple frame, complete with built-in
handles.• Set Contents: 1 woven basket, 1 canvas liner, and 2 side mount rails.• Rail width is trimmable to fit various openings. Offered in standard and
euro sizes.• 1/box. Sold individually.
Product # Width Depth Height
4WV-15I 14-1/2” to 12-1/4” 21-1/4” 7-3/8”
4WV-18I 17-1/2” to 15-1/4” 21-1/4” 7-3/8”
4WV-320I 14-1/8” to 13-5/8” 17-3/4” 7-11/16”
4WV-420I 18-1/8” to 17-1/2” 17-3/4” 7-11/16”
4WV-520I 22-1/8” to 22-1/2” 17-3/4” 7-11/16”
188 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERSW
all/Upper Cabinet O
rganizers
Wall/Upper Cabinet Organizers
Wall Pull-Out Shelving System448-WC Series - Wood Classics
• Designed for installation in wall 9” & 12” cabinets.• Up to 5 shelf surface areas by utilizing the top of the unit to provide
another shelf in taller 36” or 42” applications.• Patented door mount brackets provide up to 5” of flexibility for installa-
tion on any door style.• Made from maple with UV clear coat.• Set Includes: Pull-out shelving system, 3 adjustable shelves with chrome
rails, 100lb. full-extension, tri-slides.• 1 set/box. Sold per set.
Product # Width Depth Height
448-WC-05C 5” 10-3/4” 26-1/4”
448-WC-08C 8” 10-3/4” 26-1/4”
Wall Filler Cabinet Organizer432 Series - Wood Classics
• Designed to be installed between two cabinets, only the face must be added.
• Made from maple with UV clear coat.• Set Includes: 1 organizer with 100lb. full-extension tri-slides and adjust-
able shelves with chrome rails.• 1 set/box. Sold per set.
Product # Width Depth Height
432-WF-3C 3” 11-1/8” 30”
432-WF-6C 6” 11-1/8” 30”
KitchenMate Wall Pantry Filler
• Simply installs between adjacent cabinets to provide valuable storage space.
• Features KV 8405 100lb heavy-duty full extension ball bearing slides with adjustable shelves.
• Unique magnetic push latch, ours don’t pull out, they push in.• Solid maple and plywood construction.• 1 set/box. Sold per set.
Product # Width Depth Height
P0473MNL1 3” 12” 30”
P0476MNL1 6” 12” 30”
Pull-Down Shelving System5PD Series - Premiere Chrome
• Two-tier pull-down shelf that brings hard-to-reach items down 10” while pulling out 16-3/4” from the cabinet.
• Gas assisted lifting/lowering mechanism provides stability• Locking arm holds shelf in down position for complete accessibility.• Sleek, chrome plated wire design.• Side and bottom mount brackets.• 1 set/box. Sold per set.
Product # Width Height Depth
5PD-24CRN 22-1/4” 18-5/16” 10-3/8”
TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 189
To Order – Call 509.535.1663 or 800.888.1663Lazy Susans/Corner Cabinetry
KITCHEN ORGANIZERS
Lazy Susans/Corner Cabinetry
Lazy Susan Hardware and Swivel Bearings
Lazy Susan Turntable Swivels
• Ball bearing turntable.• May be used for rotating book racks, serving trays, kitchen storage racks,
etc.• Zinc finish.• 10/box. Sold individually.
Product # Size Load Rating
9547 4” Square 350 lbs.
9548 6” Square 500 lbs.
9549 12” Round 1000 lbs.
Lazy Susan Turntable Swivels
• Ball bearing turntable.• Heavy-duty steel; zinc finish.• May be used for rotating book racks, serving trays, kitchen storage racks,
etc.• 1/box. Sold individually.
Product # Size Load Rating
TR-6C 6” Square 500 lbs.
TR-12C 12” Round 1000 lbs.
Lazy Susan Turntable Swivel
• Ball bearing turntable.• Aluminum with bumpers.• Rohs compliant.• Inner Diameter: 10-1/2”; Height: 1/2”.• 20/box. Sold individually.
Product # Size Load Rating
FT54300 12-3/4” 175 lb.
Lazy Susan Pivot Hardwarefor Custom Wood Shelves
• Used for custom wood shelf applications.• Aluminum.• 12/box. Sold individually.
Product # Description
P19 Post - 27-1/2” x 1-1/16”
PS4 Positioning Stop
R14B Full Circle Shelf Support
R14H Pivot Hardware Set
SB2 Pie Cut Shelf Support
2-Shelf Full Circle Hardware Setfor Custom Wood Shelves
• Rev-A-Shelf Full Circle Hardware Set for use with wood or laminate shelves.
• Set includes: Top and bottom pivots, 3/4” diameter shaft assembly for 24”-31” (610mm-788mm) inside cabinet height, collar assembly, two polymer full circle shelf supports and mounting screws.
• 1/box. Sold individually.
Product #
6020-04P-52
190 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERSLazy Susans/Corner Cabinetry
Full-Circle 2-Shelf Hardware Setfor Polymer Shelves
• Full Circle Hardware Only, for Rev-A-Shelf full circle lazy susan sets.• 3/4” diam. telescoping center shaft (12” upper and 36” lower shaft),• Post & pivot hardware accommodates 38”-46” inside cabinet height.• Set includes: Top and bottom pivots, 3/4” diameter shaft assembly, collar
assembly, and mounting screws.• 1/box. Sold individually.
Product # Description
6022-04-52-526 Post & Pivot Hardware
Full-Circle 2-Shelf Hardware Sets - Bulkfor Polymer Shelves
• Full Circle Hardware Only, for Rev-A-Shelf full circle lazy susan sets.• 3/4” diam. telescoping center shaft (12” upper and 21” lower shaft),• Post & pivot hardware accommodates 24”-31” inside cabinet height.• Use with 6001 Bulk Shelves (sold separately) to make 6 complete 2-shelf
lazy susan sets.• Bulk Case Contains: 6ea. top & bottom pivots, 6ea. shaft assemblies, 6ea.
collar assemblies, 6 sets mounting screws.• 6 case/box. Sold per case.
Product # Description
6022-04-4 Post & Pivot Hardware
Lazy Susan Lower Shaft Assembly
• Rev-A-Shelf lazy susan lower shaft only.• For use with full circle dependently rotating sets.• 3/4” diameter, bright zinc plated.• 31” lower shaft assembly for use in 30”-36” wall cabinet applications.• 36” lower shaft assembly for use in 36”-42” wall cabinet applications.• 1/box. Sold individually.
Product # Description
6020-96-3100-2 31” Shaft Only
6020-96-3600-2-52 36” Shaft Only
Full Circle Lazy Susans
Full Circle Lazy Susan 2-Shelf Set6012 Series - Polymer Trays
• 2-Shelf Set with chrome shaft & hardware.• Dependently rotating shelves, height adjusts easily with one screw.• Polystyrene material with tough, anti-skid texture surface.• 3/4” diam. telescoping center shaft (12” upper and 21” lower shaft),• Accommodates 24”-31” inside cabinet height.• 1 set/box. Sold per set.
Product # Size Finish
6012-18-11-52 18” White
6012-18-15-52 18” Almond
6012-20-11-52 20” White
6012-20-15-52 20” Almond
6012-24-11-52 24” White
6012-24-15-52 24” Almond
6012-28-11-52 28” White
6012-28-15-52 28” Almond
Full Circle Lazy Susan 2-Shelf Set6072 Series - Polymer Trays
• 2-Shelf Set with chrome hub & hardware.• Independently rotating shelves, height easily adjusted easily with one
screw.• Polystyrene material with tough, anti-skid texture surface.• 1” diam. telescoping center shaft (12” upper and 21” lower shaft),• Accommodates 26”-32” inside cabinet height.• 1 set/box. Sold per set.
Product # Size Finish
6072-32-11-52 32” White
6072-32-15-52 32” Almond
TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 191
To Order – Call 509.535.1663 or 800.888.1663Lazy Susans/Corner Cabinetry
KITCHEN ORGANIZERS
Full Circle Lazy Susan 3-Shelf Set6013 Series - Polymer Trays
• 3-Shelf Set with chrome shaft & hardware.• Dependently rotating shelves, height easily adjusted with one screw.• Polystyrene material with tough, anti-skid texture surface.• 3/4” diam. telescoping center shaft (12” upper and 36” lower shaft), can be
cut down.• Accommodates 38”-46” inside cabinet height.• 1 set/box. Sold per set.
Product # Size Finish
6013-18-11-526 18” White
6013-20-11-526 20” White
Full Circle Lazy Susan Sets - Bulk6012 Series - Polymer Trays
• Bulk sets, trays and hardware sold separately.• Dependently rotating shelves, height adjusts easily with one screw.• Polystyrene material with tough, anti-skid texture surface.• 3/4” diam. telescoping center shaft (12” upper and 21” lower shaft),• Post & pivot hardware accommodates 24”-31” inside cabinet height.• 1 case/box. Sold per case.
Product # Description Finish Qty/Case
6001-18-11-4 18” Tray Only White 12
6001-18-15-4 18” Tray Only Almond 12
6001-20-11-4 20” Tray Only White 12
6001-20-15-4 20” Tray Only Almond 12
6001-28-11-4 28” Tray Only White 12
6001-28-15-4 28” Tray Only Almond 12
6022-04-4 Post & Pivot Hardware Zinc 6
Full Circle Replacement Shelves6001 Series - Polymer Trays
• Shelves only, hardware sold separately.• Use as replacements or where extra shelves are needed.• Polystyrene material with tough, anti-skid texture surface.• 1/box. Sold individually.
Product # Size Finish
6001-18-11-52 18” White
6001-20-11-52 20” White
6001-20-15-52 20” Almond
6001-24-11-52 24” White
6001-28-11-52 28” White
6001-28-15-52 28” Almond
Full Circle Lazy Susan 2-Shelf SetLazy Daisy - Natural Wood
• 2-Shelf Set with 3/4” diam. telescoping shaft.• Furniture grade design with steam bent rim and chrome hubs.• Independently rotating shelves, height adjusts easily with one screw.• 2-3/8” high steam bent rim, 5/8” thick solid maple tray bottom, doweled
(2) butt joint.• Accommodates 26”-31” inside cabinet height.• 1 set/box. Sold per set.
Product # Size
LD-4NW-072-18-1 18”
LD-4NW-072-28-1 28”
LD-4NW-072-32-1 32”
192 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERSLazy Susans/Corner Cabinetry
Full Circle Lazy Susan 2-Shelf SetWood Classic
• 2-Shelf Set with 1” diam. telescoping shaft (9-1/4” upper & 22-1/2” lower shaft assembly).
• Independently rotating shelves, height adjusts easily with one screw.• 1-5/8” solid wood rim, 5/8” thick solid maple tray bottom, finger joint.• Accommodates 26”-32” inside cabinet height.• 1 set/box. Sold per set.
Product # Size
4WLS072-20-52 20”
Full Circle Lazy Susan 3-Shelf SetLazy Daisy - Natural Wood
• 3-Shelf Set with 1” diam. telescoping shaft (9-1/4” upper & 36” lower shaft assembly).
• Furniture grade design with steam bent rim and chrome hubs.• Independently rotating shelves, height adjusts easily with one screw.• 2-3/8” high steam bent rim, 5/8” thick solid maple tray bottom, doweled
(2) butt joint.• Accommodates 35”-43” inside cabinet height.• 1 set/box. Sold per set.
Product # Size
LD-4NW-073-1836-1 18”
Full Circle Lazy Susan 3-Shelf SetWood Classic
• 3-Shelf Set with 1” diam. telescoping shaft (12” upper & 36” lower shaft).• Independently rotating shelves, height adjusts easily with one screw.• 1-5/8” solid wood rim, 5/8” thick solid maple tray bottom, finger joint.• Accommodates 38”-46” inside cabinet height.• 1 set/box. Sold per set.
Product # Size
4WLS073-20-536 20”
Recorner Maxx Round Lazy Susan 2-Shelf Set
New Item!• Features unique construction with no center pole.• Bases stabilized by a traverse that runs through the cabinet.• Minimum installation height 24-3/8”.• EasyFit: tool-free installation of storage units onto the supporting arms.• Flexible base positioning irrespective of cabinet height.• Can be installed in lower units, high units and wall units.• Load Rating: 62lbs. evenly spaced; 26.5 lbs. for 18-7/8” size.• Finish: Maple/Silver.• Set Contents: 2 trays, 2 support arms, 2 wall brackets and mounting
instructions• 1 set/box. Sold per set.
Product # Size A B C
9000-4103 18-7/8” 23-5/8” 12-1/4” - 13-3/4” 11-5/8”
9000-4101 26-3/4” 31-1/2” 21-1/4” - 24” 19-7/8”
9000-4099 30” 35-1/2” 21-1/4” - 24” 19-7/8”
TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 193
To Order – Call 509.535.1663 or 800.888.1663Lazy Susans/Corner Cabinetry
KITCHEN ORGANIZERS
Full Circle Shelf with Swivel BearingLazy Daisy - Natural Wood
• Shelf with aluminum swivel bearing attached.• 18” tray features a 7” swivel; 24”-32” trays feature a 10” swivel.• 2-3/8” high steam bent rim, 5/8” thick maple tray bottom, doweled (2)
butt joint.• Tray pre-drilled with screw hole to mount bearing to cabinet, screw hole
cover cap included.• 1/box. Sold individually.
Product # Size
LD-4NW-001-18B-1 18”
LD-4NW-001-28B-1 28”
LD-4NW-001-32B-1 32”
Full Circle Shelf with Swivel BearingWood Classic
• Shelf with 7” aluminum swivel bearing attached.• 1-5/8” solid wood rim, 5/8” thick solid maple tray bottom, finger joint.• Tray pre-drilled with screw hole to mount bearing to cabinet, screw hole
cover cap included.• 1/box. Sold individually.
Product # Size
4WLS001-20-B52 20”
Full Circle 2-Shelf Set with Swivel BearingWood Trays
• Pre-mounted die-cast aluminum bearing for ultra smooth movement.• 1-3/4” lip height.• 450lb weight capacity.• 12mm multi-directional plywood shelf with 10-ply maple rim.• Tray pre-drilled with screw hole to mount bearing to cabinet, screw hole
cover cap included.• Set includes: 2 trays with attached cast bearings.• 1 set/box. Sold per set.
Product # Size
T7228K30TRDCBMNL1 28”
T7232K30TRDCBMNL1 32”
D-Shape Lazy Susans
D-Shape Shelf with Swivel BearingLazy Daisy - Natural Wood
• Shelf with aluminum swivel bearing attached.• 2-3/8” high steam bent rim, 5/8” thick maple tray bottom, doweled (2)
butt joint.• Tray pre-drilled with screw hole to mount bearing to cabinet, screw hole
cover cap included.• 1/box. Sold individually.
Product # Size (D) A B C
LD-4NW-201-20BS-1 20” 8-3/8” 9-7/8” 18-1/8”
LD-4NW-201-32BS-1 32” 13-1/2” 16-3/4” 29-3/8”
D-Shape Lazy Susan 2-Shelf Set7012 Series - Polymer Trays
• 2-Shelf Set with chrome shaft & hardware.• Dependently rotating shelves, height adjusts easily with one screw.• Polystyrene material with tough, anti-skid texture surface.• 3/4” diam. telescoping center shaft (12” upper and 21” lower shaft),• Accommodates 24”-31” inside cabinet height.• Finish: White.• 1 set/box. Sold per set.
Product # Size (D) A B C
7012-20-11-52 20” 8-7/8” 9-1/4” 18-7/8”
D-Shape Lazy Susan 2-Shelf Set6272 Series - Polymer Trays
• 2-Shelf Set with chrome hub & hardware, and self locating stop.• Independently rotating shelves.• Height adjusts easily with one screw.• Polystyrene material with tough, anti-skid texture surface.• 3/4” diam. telescoping center shaft (12” upper and 21” lower shaft),• Accommodates 26”-32” inside cabinet height.• Finish: White.• 1 set/box. Sold per set.
Product # Size (D) A B C
6272-20-11-52 20” 8-7/8” 9-1/4” 19”
194 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERSLazy Susans/Corner Cabinetry
Kidney Lazy Susans
Kidney Lazy Susan 2-Shelf Set6472 Series - Polymer Trays
• 2-Shelf Set with chrome shaft & hardware.• Independently rotating shelves, height adjusts easily with one screw.• Polystyrene material with tough, anti-skid texture surface.• 1” diam. telescoping center shaft (9-1/4” upper and 22-1/2” lower shaft).• Accommodates 26”-32” inside cabinet height.• 1 set/box. Sold per set.
Product # Size (D) A B C Finish
6472-18-11-52 18” 1-3/4” 2-13/16” 11-13/16” White
6472-24-11-52 24” 1-1/2” 2-5/16” 14-5/16” White
6472-28-11-52 28” 3” 4-11/16” 18-5/8” White
6472-28-15-52 28” 3” 4-11/16” 18-5/8” Almond
6472-32-11-52 32” 4-1/4” 6-7/16” 22-7/16” White
6472-32-15-52 32” 4-1/4” 6-7/16” 22-7/16” Almond
Kidney Lazy Susan 2-Shelf Sets - Bulk6472 Series - Polymer Trays
• 2-Shelf Set with chrome shaft & hardware.• Independently rotating shelves, height adjusts easily with one screw.• Polystyrene material with tough, anti-skid texture surface.• 1” diam. telescoping center shaft (9-1/4” upper and 22-1/2” lower shaft).• Accommodates 26”-32” inside cabinet height.• Each Set Contains: 2 - shelves, telescoping shaft, mounting hardware-
complete with screws.• Sold by the case only, 5 complete sets/bulk case.
Product # Size (D) A B C Finish
6472-28-11-4S 28” 3” 4-11/16” 18-5/8” White
6472-28-15-4S 28” 3” 4-11/16” 18-5/8” Almond
Kidney Lazy Susan 2-Shelf SetLazy Daisy - Natural Wood
• 2-Shelf Set with 1” diam. telescoping shaft.• Furniture grade design with steam bent rim and chrome hubs.• Independently rotating shelves, height adjusts easily with one screw.• 2-3/8” high steam bent rim, 5/8” thick solid maple tray bottom, doweled
(2) butt joint.• Accommodates 26”-32” inside cabinet height.• 1 set/box. Sold per set.
Product # Size (D) A B C
LD-4NW-472-28-1 28” 3” 4-1/4” 18-1/8”
LD-4NW-472-32-1 32” 4” 5-3/4” 21-5/8”
Kidney Lazy Susan 2-Shelf SetWood Classic
• 2-Shelf Set with 1” diam. telescoping shaft (9-1/4” upper & 22-1/2” lower shaft assembly).
• Independently rotating shelves, height adjusts easily with one screw.• 1-5/8” solid wood rim, 5/8” thick solid maple tray bottom, finger joint.• Accommodates 26”-32” inside cabinet height.• 1 set/box. Sold per set.
Product # Size (D) A B C
4WLS472-24-52 24” 1-7/16” 2-3/8” 14-3/8”
Kidney Lazy Susan 2-Shelf Set5472 Series - Premiere Chrome
• 2-Shelf Set with chrome hubs & hardware.• Independently rotating shelves, height adjusts easily with one screw.• Heavy-duty chrome wire for contemporary kitchen designs.• 1” diam. telescoping center shaft (9-1/4” upper and 22-1/2” lower shaft),• Accommodates 26”-32” inside cabinet height.• 1 set/box. Sold per set.
Product # Size (D) A B C
5472-28-CR 28” 3” 4-3/8” 18-7/16”
5472-32-CR 32” 4-1/8” 6” 22-1/16”
TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 195
To Order – Call 509.535.1663 or 800.888.1663Lazy Susans/Corner Cabinetry
KITCHEN ORGANIZERS
Recorner Maxx Kidney Lazy Susan 2-Shelf Set
New Item!• Features unique construction with no center pole.• Bases stabilized by a traverse that runs through the cabinet.• Minimum installation height 24-3/8”.• EasyFit: tool-free installation of storage units onto the supporting arms.• Flexible base positioning irrespective of cabinet height.• Can be installed in lower units, high units and wall units.• Load Rating: 62lbs. evenly spaced; 26.5 lbs. for 18-7/8” size.• Finish: Maple/Silver.• Set Contents: 2 trays, 2 support arms, 2 wall brackets and mounting
instructions• 1 set/box. Sold per set.
Product # Size A B C
9000-4102 18-7/8” 23-5/8” 12-1/4” - 13-3/4” 11-5/8”
9000-4100 26-3/4” 31-1/2” 21-1/4” - 24” 19-7/8”
9000-4098 30” 35-1/2” 21-1/4” - 24” 19-7/8”
Kidney Shelf with Swivel BearingLazy Daisy - Natural Wood
• Shelf with aluminum 10” swivel bearing attached.• 2-3/8” high steam bent rim, 5/8” thick maple tray bottom, doweled (2)
butt joint.• Tray pre-drilled with screw hole to mount bearing to cabinet, screw hole
cover cap included.• 1/box. Sold individually.
Product # Size (D) A B C
LD-4NW-401-28BS-1 28” 3” 4-1/4” 18-1/8”
LD-4NW-401-32BS-1 32” 4” 5-3/4” 21-5/8”
Kidney 2-Shelf Set with Swivel BearingWood Trays
• Pre-mounted die-cast aluminum bearing for ultra smooth movement.• 1-3/4” lip height.• 450lb weight capacity.• 12mm multi-directional plywood shelf with 10-ply maple rim.• Set includes: 2 trays with attached cast bearings.• Tray pre-drilled with screw hole to mount bearing to cabinet, screw hole
cover cap included.• 1 set/box. Sold per set.
Product # Size
T8228K30TRDCBMNL1 28”
T8332K30TRDCBMNL1 32”
Deep Bin Super Susan & Swivel BearingWood Tray
• 450lb. cast aluminum bearing with detent attached.• Hard maple and birch construction and 1/2” plywood shelf.• Solid maple rim front; 6” high lip.• Tray pre-drilled with screw hole to mount bearing to cabinet, screw hole
cover cap included.• 1/box. Sold individually.
Product # Diameter
T8530K30TR6DCBMNL1 30”
196 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERSLazy Susans/Corner Cabinetry
Pie-Cut Lazy Susans
Pie Cut Lazy Susan 2-Shelf Set6142/6942 Series - Polymer Trays
• 2-Shelf Set with chrome hub & hardware.• Standard centering hardware, raises 3/8” as unit rotated in & out of
detent.• Polystyrene material with tough, anti-skid texture surface.• 6142 Series: 3/4” diam. telescoping center shaft, accommodates 24”-31”
inside cabinet height.• 6942 Series: 1” diam. telescoping center shaft, accommodates 26”-32”
inside cabinet height. Upper shelf adjustable, lower shelf is in fixed posi-tion.
• 1 set/box. Sold per set.
Product # Size (D) A B C Finish
6142-18-11-52 18” 7/8” 1-1/4” 10-1/4” White
6142-22-11-52 22” 1-1/8” 1-9/16” 12-9/16” White
6942-24-11-52 24” 1-3/8” 1-15/16” 13-15/16” White
6942-24-15-52 24” 1-3/8” 1-15/16” 13-15/16” Almond
6942-28-11-52 28” 3” 4-1/4” 18-1/4” White
6942-28-15-52 28” 3” 4-1/4” 18-1/4” Almond
Pie Cut Lazy Susan Sets - Bulk6901 Series - Polymer Trays
• Bulk sets, trays and hardware sold separately.• Dependently rotating shelves, height adjusts easily with one screw.• Polystyrene material with tough, anti-skid texture surface.• 1” diam. telescoping center shaft system.• Post & pivot hardware accommodates 26”-32” inside cabinet height.• Specifications: A = 3” ; B = 4-1/4”; C = 18-1/4”; D = 28”; Z = 10-11/16” +
1/8”gap.• 1 case/box. Sold per case.
Product # Description Finish Qty/Case
6901-28-11-4 28” Tray Only White 12
6942-04-28-4 Post & Pivot Hardware Zinc 6
Pie-Cut Lazy Susan 2-Shelf SetLazy Daisy - Natural Wood
• 2-Shelf Set with 1” diam. telescoping shaft.• Furniture grade design with steam bent rim and chrome hubs.• Dependently rotating shelves, physically attach to the door.• 2-3/8” high steam bent rim, 5/8” thick solid maple tray bottom, doweled
(2) butt joint.• Accommodates 26”-32” inside cabinet height.• Specifications: A = 3” ; B = 4-1/4”; C = 18-1/8”; D = 27-3/4”; Z = 10-7/8” +
1/8”gap.
• 1 set/box. Sold per set.
Product # Size
LD-4NW-942-28-1 28”
TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 197
To Order – Call 509.535.1663 or 800.888.1663Lazy Susans/Corner Cabinetry
KITCHEN ORGANIZERS
Blind Corner Lazy Susans
Pivot & Slide Half Moon 2-Shelf Set6882 Series - Polymer Trays
• Designed for a blind corner cabinet applications.• 2-Shelf Set with pivot and slide hardware.• 15-7/8”H shaft assembly.• Polystyrene trays with tough, anti-skid texture surface.• For frame and frameless cabinets, non-handed.• 1 set/box. Sold per set.
Product # Size Min. Opening Finish
6882-31-11-570 31” 13-1/4” White
6882-31-15-570 31” 13-1/4” Almond
6882-33-11-570 33” 16-1/8” White
6882-33-15-570 33” 16-1/8” Almond
6882-39-11-570 39” 19-1/4” White
6882-39-15-570 39” 19-1/4” Almond
Vibo Fly Moon Corner Shelves Only
New Item! • An innovative and unique space saving corner unit.• Shelves can be pulled-out independently.• Trays designed to increase storage surface - feature 2-3/4’’H shelf rail, and
non slip melamine surface.• For frame and frameless cabinets.• Load capacity 44 lbs (20kg) per shelf.• Minimum door opening 85°.• Finish: Champagne/maple.• Tray Height: 3-3/8”.• Kit contents: 2 pull-out pivoting shelves only. Corner Mechanism
must be ordered separately.• 1 pr/box. Sold per pair.
Product # Handing Min.Opening Tray Width
QFLY40DXM20MVCH Right 13-5/8” 29”
QFLY40SXM20MVCH Left 13-5/8” 29”
QFLY45DXM20MVCH Right 16” 32-3/16”
QFLY45SXM20MVCH Left 16” 32-3/16”
QFLY60DXM20MVCH Right 21” 38-7/16”
QFLY60SXM20MVCH Left 21” 38-7/16”
Vibo Fly Moon Corner Mechanism Only
New Item! • Allows shelves (sold separately) to be pulled-out independently.• Height adjustable shaft, easy to install.• Patented mechanism can be easily fixed in on one side of the cabinet.• For frame and frameless cabinets.• Minimum door opening 85°.• Finish: Champagne.• Height Adjustable: 26”-32” (660-813mm).• Kit contents: Corner mechanism with height adjustable shaft; assembly
instructions and drilling template, extension pipe.• Must order Separately: Vibo Fly Moon 2 pull-out pivoting shelf set.• 1/box. Sold individually.
Product # Handing Min.Opening
QFLYAST2DXVCH Right 13-5/8” or 16”
QFLYAST2SXVCH Left 13-5/8” or 16”
QFLYAST602DXVCH Right 21”
QFLYAST602SXVCH Left 21”
198 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERSLazy Susans/Corner Cabinetry
Half Moon 2-Shelf Tray SetLazy Daisy - Natural Wood
• Designed for blind corner cabinet applications.• 2-Shelf Set with pivot and slide hardware.• Furniture grade design with steam bent rim and chrome hubs.• 2-3/8” high steam bent rim, 5/8” thick solid maple tray bottom, doweled
(2) butt joint.• 15-7/8”H shaft assembly.• For frame and frameless cabinets, non-handed.• 1 set/box. Sold per set.
Product # Size Min. Opening
LD-4NW-882-32-1 32” 12”
LD-4NW-882-35-1 35” 15”
LD-4NW-882-38-1 38” 18”
Pivot & Slide Half-Moon ShelfWire Tray
• Designed for use in blind corner cabinets.• Pivot-out shelf features non-handed reversible hinge system.• Glide-out shelf extends on 21-5/8” heavy-duty ball-bearing slides.• Nylon door follower attaches susan to door for automatic shelf retrieval.• 1 set/box. Sold per set.
Product # Size Min.Opening Finish
HM28G-W 28” 14-1/2” White
KitchenMate Blind Corner Caddy
The KitchenMate Blind Corner Caddy is designed for those hard-to-reach areas in a blind corner cabinet. Perfect for bulk storage, occasional-use items or counter top appliances.Set Includes: • Two-shelf drawer kit with 100lb, full-extension, ball-bearing slides, pre-
mounted onto sled with vertical side panels (for upper tray).• Swing-out, all solid wood, pre-finished maple storage bins accessible
from both sides.• Designed for 15” or larger openings.• 1 set/box. Sold per set.
Product #
P0650MNL1
KitchenMate Corner Pantry
The KitchenMate Corner Pantry is a truly unique alternative to the tradi-tional lazy susan. Fabricated from solid maple and plywood construction, this unit comes fully assembled and pre-mounted with a plywood sled for easy installation.• Designed for 33” & 36” corner cabinets.• Features heavy-duty, 125lb. full extension slides.• Perfect for remodels, can be easily installed even with existing counter-
top intact.• 1 set/box. Sold per set.
Product # Size Height
P0610MNL1 33” 26-1/2”
P0615MNL1 36” 26-1/2”
TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 199
To Order – Call 509.535.1663 or 800.888.1663Pantry O
rganizers / Blind CornerKITCHEN ORGANIZERS
Pantry Organizers / Blind Corner
Rev-A-Shelf Blind Corner Optimizer5PSP CR Series
New Item! • Maximizes space in blind corner cabinets while allowing the user full ac-
cessibility to the entire unit.• Features 100lb rated full-extension ball-bearing slides.• Unit slides completely outside of cabinet for hard to reach items.• Works in either a blind-left or blind-right corner cabinet.• Fit most 45”(PSP-15/18) and 48” (PSP-18).• Finish: Chrome.
• Basket Dimensions 5PSP-15CR: 11-3/4”W x 16-1/2”D x 3-1/2”H.• Basket Dimensions 5PSP-18CR: 14-3/4”W x 16-1/2”D x 3-1/2”H.• Set Contents: frame w/4 chrome baskets, full-extension 100lb. slides,
mounting hardware & screws.• 1/box. Sold individually.
Product # Width Depth Height Min.Opening
5PSP15-CR 26-1/4” 20-1/4” 21” 15”W
5PSP18-CR 32-1/4” 20-1/4” 21” 17-3/4”W
Blind Corner Organizer with Soft-Close5707 Series
New Item! Maximize space in blind corner cabinets with this Premiere Corner System that provides easy access to hard-to-reach areas hidden in the back of the cabinet.
• Two large and two small heavy-gauge chrome plated baskets.• Exceptionally designed pivot and slide on a “soft-close” slide system.• Universal door mounting hardware for left or right hand applications and
easy to follow installation instructions.• Can be utilized in both face frame and frameless cabinets with 15” and
18” openings.• Finish: Chrome.• 1/box. Sold individually.
Product # Width Height Depth Min. Opening
5707-15CR 39” to 48” 21-3/8” 20-1/16” 15”W
5707-18CR 39” to 48” 21-3/8” 20-1/16” 18”W
Chef’s Double Pantry System
The Omega National Chef’s Pantry Systems are not only beautiful but they are heavy duty as well. Manufactured from Baltic Birch, the Omega National pantry systems are highly versatile and allow for many different shelving configurations.• Min. Cabinet opening: 33” wide.• Clear Coated Birch.
• System Includes: (2) Swing-Out Units: 51 1/2”H x 12 1/4”W x 7 1/4”D; (2) Door Units: 51 1/2” H x 12 1/4” W x 3 3/4” D ; (24) Shelf Supports; (4) Non-Mortise Hinges 3 1/2”; (12) Adjustable Shelf Fronts; (6) Door Unit Adjustable Shelves; (6) Swing-Out Adjustable Shelves; (1) Mounting Hardware Package.
• Shown with Center Mounting Panel (not included).• 1 set/box. Sold per set.
Product #
P0251DNL1
Chef’s Upper Door System
The Omega National Chef’s Pantry Systems are not only beautiful but they are heavy duty as well. Manufactured from Baltic Birch, the Omega National pantry systems are highly versatile and allow for many different shelving configurations.• Clear Coated Birch.
• System Includes: (2) Door Units: 18-1/2” H x 12-1/4” W x 3-3/4” D ; (1) Mounting Hardware Package.
• 1 set/box. Sold per set.
Product #
P0262DNL1
200 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERSPantry O
rganizers / Blind Corner
KV 8000 Undermount Pantry SlidesOvertravel - 130lb.
Designed for use with kitchen pantries, computer and entertainment centers, or where a pull-out shelf is needed.• Load capacity: 130lbs.• Extension: full-extension plus overtravel.• Mounting: bottom mount.• Slide Action: Telescoping; ball-bearing.• Clearance: 3/4” (slide only); 2-1/4” (with brackets).• Height: 1-35/64”.• Removable brackets that allow for fast and easy installation.• Hold-in detent and key-hole style mounting holes.• Steel; anochrome plated finish.• 5 pr/box. Sold per pair.
Product # Size
8000P20 20”
8000P22 22”
8000P24 24”
Glideware Pull-Out Rack with Hooks
New Item! • Keeps cabinets organized and eliminates clutter.• Solid, clear maple body and 7 solid metal, custom-made hooks.• Gliding hardware designed with a 100-pound capacity.• Weighted hooks and synchronized motion keeps cookware quiet.• Designed to fit any standard depth cabinet - installation in a full height
cabinet is recommended to hang larger cookware.• Top of unit to bottom of hooks: 5”.• Rear mounting bracket (for face frame installation) will add 3/4” to overall
length.• Lifetime Warranty.• 1/box. Sold individually.
Product # Length Width Height Finish
GLDWR7HK 22” 4-1/4” 3” Clear Maple
Hooks for Glideware
• Solid metal, custom-made, weighted hooks designed to fit the Glideware Racks.
• 1 pr/box. Sold per pair.
Product # Finish
GLDWR2HK Satin Nickel
TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 201
To Order – Call 509.535.1663 or 800.888.1663D
oor Storage and Spice RacksKITCHEN ORGANIZERS
Door Storage and Spice Racks
Wood Door Storage Tray4200 Series - Wood Classics
• Easy to install with screw-in clips (included).• May also be mounted to 6232 adjustable aluminum standards (sold
separately).• Includes: Single maple wood tray with chrome rails and screw-in clips.• 1/box. Sold individually.
Product # Width Depth Height
4231-14-52 13-3/4” 4-1/4” 3-5/8”
Door Storage Shelf Set6230 Series
• Easy to install with screw-in clips (included).• May also be mounted to 6232 adjustable aluminum standards (sold
separately).• Set includes: 2 polymer shelves with screw-in clips.• 1 set/box. Sold per set.
Product # Width Depth Height
6232-14-11-52 13-3/4” 4-1/4” 3-9/16”
6232-20-11-52 19-3/4” 4-1/4” 3-9/16”
6232-08-11-52 7-7/8” 4-1/4” 3-9/16”
Shelf Standards & Clips
• For use with Rev-A-Shelf Door Storage trays (sold separately).• Adjustable clips attach your door storage tray to the standards.
Product # Description Finish Qty/Box
6231-41-4101-10 Replacment Clips White 1/box. Sold individually.
6232-58-4528-52 58” Standards w/10 Clips Aluminum 1 pr/box. Sold per pair.6232-26-4528-52 26” Standards w/4 Clips Aluminum
Adjustable Door Mount Spice Rack4ASR Series - Wood Classics
• Maple hardwood with a UV-cured clear finish.• Adjustable shelves offer up to 5” of mounting adjustment.• Hold spice bottles up to 2-1/4” diam.• 1/box. Sold individually.
Product # Width Depth Height Min.Opening
4ASR-15 10-1/8” 4” 25” 11”
4ASR-18 13-1/8” 4” 25” 14”
4ASR-21 16-1/8” 4” 25” 16-3/4”
Door Mount Spice Rack4SR Series - Wood Classics
• Maple hardwood rack with a UV-cured clear finish.• Easily installs with just four screws.• 1/box. Sold individually.
Product # Width Height Depth
4SR-15 9-5/8” 21-1/2” 3-1/8”
4SR-18 12-5/8” 21-1/2” 3-1/8”
4SR-21 15-5/8” 21-1/2” 3-1/8”
202 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERSD
oor Storage and Spice Racks
Door Mount Spice Rack565 Series
• Top 3 baskets are 2-3/8” deep and the bottom basket is 4-1/8” deep.• Includes screw down clips for easy mounting.• Heavy gauge white wire.• 1/box. Sold individually.
Product # Width Height
565-8-52 7-7/8” 21-3/8”
565-10-52 10-5/8” 21-3/8”
565-14-52 13-5/8” 21-3/8”
Sink Base Door Storage4SBSU Series - Wood Classics
• Maple hardwood construction with a UV-cured clear finish.• Features a polymer tray on the top shelf with new adjustable door mount
brackets that provide installation flexibility up to 5”.• 1/box. Sold individually.
Product # Width Height Depth Min.Opening
4SBSU-15 10-1/2” 18-1/2” 5” 11-5/8”
4SBSU-18 13-1/2” 18-1/2” 5” 14-3/8”
4SBSU-21 16-1/2” 18-1/2” 5” 17-1/4”
Drawer OrganizersDrop-In Drawer Peg System4DPS Series - Wood Classics
• Endlessly changeable pegboard system creates instant storage for all kinds of items.
• Can be trimmed to fit and is constructed from UV-Cured maple.• Includes: 1 peg board and push-in pegs. 4DPS-2421 (9 pegs), 4DPS-3021
(12 pegs) , 4DPS-3921 (16 pegs).
Product # Width Depth Height Qty/Box
4DPS-2421 24-1/4” 21-1/4” 6-5/8”1 set/box. Sold per set.4DPS-3021 30-1/4” 21-1/4” 6-5/8”
4DPS-3921 39-1/4” 21-1/4” 6-5/8”
Additional Pegs
4DPS-PEG-4 1-1/4” 1-1/4” 6” 4/box. Sold individually.
Trimmable Cutlery Tray Insert4WCT Series - Wood Classics
• Height: 2-7/8”.• Cut to size, drop-in installation.• Maple hardwood with a UV-cured clear finish.• 1/box. Sold individually.
Product # Overall Size Min. Trim
4WCT-1 14-5/8”W x 22”D 8-3/4”W x 15-1/2”D
4WCT-3 20-5/8”W x 22”D 14-1/4”W x 15-1/2”D
TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 203
To Order – Call 509.535.1663 or 800.888.1663D
rawer O
rganizersKITCHEN ORGANIZERS
Trimmable Utility Tray Insert4WUT Series - Wood Classics
• Height: 2-7/8”• Cut to size, drop-in installation.• Maple hardwood with a UV-cured clear finish.• 1/box. Sold individually.
Product # Overall Size Min.Trim
4WUT-1 18-1/2”W x 22”D 8-1/8”W x 17”D
4WUT-3 24”W x 22”D 12”W x 17-5/8”D
Wood Knife Block Insert4WKB Series - Wood Classics
• Features 19 slots to store knives.• Birch/maple hardwood coated with a UV-cured clear finish.• Trimmable for customized drawer sizes.• 1/box. Sold individually.
Product # Width Depth Height
4WKB-1 18-1/2” 22” 2-3/8”
Knife Holder/Cutting Board Drawer System4KCB Series - Wood Classics
Combination knife holder/cutting board with full-extension, ball-bearing slides.• No drawer box needed, comes as a complete set, all you need is drawer
front.• Adjustable depth, designed for 24” deep cabinets.• Features 3 divided sections and 7 slot knife holder.• Minimum opening height : 4-3/4”.• 1 set/box. Sold per set.
Product # Width Depth Height
4KCB-18 14-1/2” 22-1/4” 5”
4KCB-21 17-1/2” 22-1/4” 5”
4KCB-24 20-1/2” 22-1/4” 5”
Cutlery Tray
• Height: 2-3/8”.• Can be custom cut to size with a simple drop-in installation.• Hi-impact rubberized polystyrene in a high gloss white or silver finish.• 1/box. Sold individually.
Product # Overall Size Min.Trim Color
GCT-1S-52 11-1/2”W x 21-1/4”D 8-5/8”W x 17-3/4”D Silver
GCT-1W-52 11-1/2”W x 21-1/4”D 8-5/8”W x 17-3/4”D White
GCT-2S-52 14-1/4”W x 21-1/4”D 11-5/8”W x 17-3/4”D Silver
GCT-2W-52 14-1/4”W x 21-1/4”D 11-5/8”W x 17-3/4”D White
GCT-3S-52 17-1/2”W x 21-1/4”D 14-3/4”W x 17-3/4”D Silver
GCT-3W-52 17-1/2”W x 21-1/4”D 14-3/4”W x 17-3/4”D White
GCT-4S-52 21-7/8”W x 21-1/4”D 18-3/8”W x 17-3/4”D Silver
GCT-4W-52 21-7/8”W x 21-1/4”D 18-3/8”W x 17-3/4”D White
204 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERSD
rawer O
rganizers
Rolling Tray System
• Roller system rolls smoothly in lower track built into bottom utility tray.• The top rolling tray requires no trimming and is easily removable.• 3-1/8”H min. cabinet opening.• Base tray: 1-5/8”H.• White high gloss finish, thick gauge polystyrene.• 1 set/box. Sold per set.
Product # Overall Size Min.Trim
RT-10-3H 11-3/4” x 16-3/4” 8-3/4” x 16-3/4”
RT-12-3H 14-1/2” x 16-3/4” 11-3/4” x 16-3/4”
RT-14-3H 17-3/4” x 16-3/4” 14-3/4” x 16-3/4”
RT-18-3H 21-3/4” x 16-3/4” 17-3/4” x 16-3/4”
Utility Tray
• Height: 2-3/8”• Can be custom cut to size with a simple drop-in installation.• Hi-impact rubberized Polystyrene in a high gloss white finish.• 1/box. Sold individually.
Product # Overall Size Min. Size Color
GUT-10W-52 11-1/2”W x 21-1/4”D 8-1/4”W x 17-3/4”D White
GUT-12W-52 14-1/2”W x 21-1/4”D 11-5/8”W x 17-3/4”D White
GUT-15W-52 17-1/2”W x 21-1/4”D 14-3/4”W x 17-3/4”D White
GUT-18W-52 21-7/8”W x 21-1/4”D 18-3/8”W x 17-3/4”D White
Trimmable Cutlery Tray Insert
• Height: 2”.• Can be trimmed to fit drawer.• Made of plastic with faux maple finish.• 1/box. Sold individually.
Product # Width Depth
556-53-400 8” - 12” 19-1/4” - 21-1/4”
556-53-401 12” - 16” 19-1/4” - 21-1/4”
556-53-403 16” - 20” 19-1/4” - 21-1/4”
556-53-405 20” - 24” 19-1/4” - 21-1/4”
Spice Drawer Insert4SDI Series - Wood Classics
• Height: 1-1/2”.• This insert can be customized to fit various drawer sizes.• Birch/Maple hardwood with a UV-cured clear finish.• 1/box. Sold individually.
Product # Width Depth
4SDI-18 16” 19-3/4”
4SDI-24 22” 19-3/4”
Spice Drawer Insert
• Height: 2-3/8”.• Designed to hold spice containers securely while keeping them easily
accessible.• Can be custom cut to size with a simple drop-in installation.• Hi-impact rubberized polystyrene in a high gloss white.• 1/box. Sold individually.
Product # Size Min.Trim
ST-2GW-52 16”W x 21-1/4”D 11-3/8”W x 15-1/2”D
TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 205
To Order – Call 509.535.1663 or 800.888.1663Sink Front Tip O
ut TraysKITCHEN ORGANIZERS
Spice Drawer Insert
• Designed to hold spice containers securely.• Trimmable to fit any size.• Polymer, textured finish.• 1/box. Sold individually.
Product # Size Finish
ST50-21A-52 50”W x 21”D Almond
ST50-21W-52 50”W x 21”D White
Tra-Sta Deep Drawer Divider Kit
• Design segments for any size storage or any size deep drawer. • Features 3 pre-finished 11” x 24” maple hardwood dividers and 6 pre-
drilled mounting rails. • Easily trimmed for various drawer depths.• 1 set/box. Sold per set.
Product # Finish
C0480MNL1 Maple
Vanity Drawer Organizer
• Top Rolling Tray: 5-7/8” W x 12-13/16” D x 1-1/2”H.• Base tray : 1-7/8” deep.• Requires 3-3/8”H minimum clearance.• While polymer.• 1 set/box. Sold per set.
Product # Size Min.Trim
COSK-18 14-3/4”W x 21-7/8”D 12-5/8” x 16-1/2”D
Sink Front Tip Out Trays
Sink Front Tip-out Tray Set6540 Slim Series
• Designed to be easily trimmed to length for custom applications.• Set includes: (1) - 36” extruded tray, 2 pair of hinges, 2 pair of end caps,
and adhesive.• 1 set/box. Sold per set.
Product # Length Depth Height Color
6541-36-11-52 36” 1-11/16” 2-1/2” White
6541-36-15-52 36” 1-11/16” 2-1/2” Almond
Sink Front Tip-out Tray Only6540 Slim Series
• Designed to be easily trimmed to length for custom applications.• 36” tray only, hinges & end caps sold separately.• 20/box. Sold individually.
Product # Length Depth Height Color
6541-36-11-4 36” 1-11/16” 2-1/2” White
6541-36-15-4 36” 1-11/16” 2-1/2” Almond
Tip-Out Tray Hinges & End Caps6540 Slim Series
• Set includes: (1) pair Hinges, 1 pair end caps, and adhesive• Tip-out trays sold separately.• 40 pr/box. Sold per pair.
Product # Finish
6542-97-11-4 White
6542-97-15-4 Almond
206 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERSSink Front Tip O
ut Trays
Sink Front Tip-out Tray Set6551 Series
• Extruded polymer tip-out/spice tray can be trimmed to the desired length.
• Set includes: 1 tray, 2 pair hinges, 2 pair end caps, and adhesive.• 1 set/box. Sold per set.
Product # Length Depth Height Color
6551-36-11-52 36” 2-7/16” 3-15/16” White
6551-36-15-52 36” 2-7/16” 3-15/16” Almond
Sink Front Tip-out Tray Only6571 Series
• Tray designed to be easily trimmed to length for custom applications.• Includes: 1 extruded tray only (hinges, end caps, and adhesive sold
separately).• 20/box. Sold individually.
Product # Length Depth Height Color
6571-36-11-4 36” 2-7/16” 3-15/16” White
6571-72-11-4 72” 2-7/16” 3-15/16” White
Tip-Out Tray End Caps6571 Series
• Includes: 1 pair of end caps and screws for one standard 6571 Series tip-out trays (sold separately).
• Molded white polymer.• 40 pr/box. Sold per pair.
Product # Height
ST-97-11-4 3-15/16”
Tip-Out Tray Hinges & End Caps6571 Series
• Set includes: 1 pair hinges, 1 pair end caps, and adhesive• 6571 Series tip-out tray sold separately.• 40 pr/box. Sold per pair.
Product # Finish
6552-97-11-4 White
End Cap Adhesive
• Adhesive for attaching end caps on 6541 and 6571 Series Tip-Out Trays.• 3 gram tube.• 1/box. Sold individually.
Product #
6571-60-52
Tip-Out Tray with Tab Stops6561 Series
• Installs easily with standard cabinet hinges.• NOTE: Tabs on each side adds an additional 1-1/2” to width.• Tray only, hinges not included.• 1/box. Sold individually.
Product # Tray Width Depth Height Color
6561-11-11-4 11” 2-1/8” 3-13/16” White
6561-11-15-4 11” 2-1/8” 3-13/16” Almond
6561-14-11-4 14” 2-1/8” 3-13/16” White
6561-14-15-4 14” 2-1/8” 3-13/16” Almond
TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 207
To Order – Call 509.535.1663 or 800.888.1663Sink Front Tip O
ut TraysKITCHEN ORGANIZERS
Tip-Out Tray System6572 Series - Polymer
• Sleek molded design, high-impact polystyrene.• Set includes: (1) standard tray, (1) accessory tray with a ring holder &
soap dish and 2 pair of the Self-Holdin® hinges.• 1 set/box. Sold per set.
Product # Width Depth Height Color
6572-11-11-52 11” 2-1/8” 3-13/16” White
6572-11-15-52 11” 2-1/8” 3-13/16” Almond
6572-11-17-52 11” 2-1/8” 3-13/16” Silver/metallic
6572-14-11-52 14” 2-1/8” 3-13/16” White
6572-14-15-52 14” 2-1/8” 3-13/16” Almond
6572-14-17-52 14” 2-1/8” 3-13/16” Silver/metallic
Tip-Out Tray6581 Series - Polymer
• Sleek molded design, high-impact polystyrene.• Tray only, hinges not included.• 40/box. Sold individually.
Product # Width Depth Height Color
6581-11-11-4 11” 2-1/8” 3-13/16” White
6581-11-15-4 11” 2-1/8” 3-13/16” Almond
6581-14-11-4 14” 2-1/8” 3-13/16” White
6581-14-15-4 14” 2-1/8” 3-13/16” Almond
Stainless Steel Tip-Out Tray6581 Series
• Sleek design with smooth, folded over edges and protective coating.• Does not come with built-in tab stops.• Tray only, hinges not included.• 20/box. Sold individually.
Product # Width Depth Height
6581-11-5 11-1/4” 2-1/8” 3”
6581-14-5 14-1/4” 2-1/8” 3”
6581-16-5 16” 2-1/8” 3”
6581-19-5 19” 2-1/8” 3”
6581-25-5 25” 2-1/8” 3”
6581-28-5 28” 2-1/8” 3”
Tip-Out Tray Hinges6552 Series
• Self-Holdin® hinges mount easily to all construction types and are totally concealed.
• Feature a self-closing and tip-open function.• Less than 2mm of clearance is needed for the countertop and no clear-
ance is required below the false front.• Projection: 1/2”.• 40 pr/box. Sold per pair.
Product # Width Depth Height
6552-95-0220-4 1” 1-3/4” 3-13/16”
208 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERSSink Front Tip O
ut Trays
Soft-Close Tip-Out Hinges
• Unique soft-close piston eliminates slamming.• 50 degree opening allows for complete accessibility to items stored
within.• Hinges close firmly and stay closed.• Projection: 1”.• 1 pr/box. Sold per pair.
Product # Width Depth Height
LD-0220-50SC-40 1” 2-1/2” 3-7/8”
Tip-Out Tray HingesETH Series
• Designed for long sink front or cooktop false panels• Features an adjustable opening of 45 to 90 degrees.• Chrome plated, easy installation.• 10 pr/box. Sold per pair.
Product #
6552-ETH-10
Tip-Out Tray Scissor Hinges
• Scissor Hinges are spring-loaded and self-closing with internal stop.• For use with face-frame or frameless (Euro-style) cabinetry.• 10 pr/box. Sold per pair.
Product # Width Depth Height
SH-10 2-7/8” 1-7/8” 3-13/16”
Tip-Out Tray Euro Hinges
• Allows for opening angle from 45º-90º.• Perfect for use with sink front trays as well as with bread boards. • Fits both frame and frameless cabinetry.• 10 pr/box. Sold per pair.
Product # Height Depth Width
ET-H-N 2-7/8” 2-1/4” 3-3/4”
False Front Block
• Allows false front panels to be easily installed and removed with a simple twist.
• For use with 3/4” face frames and a drawer opening height of 4-1/2”.• Install with single 1” long flat head screw in center hole.• Overall size: 5-1/2”L x 3/4”W x 1”H.• White plastic.• 100/box. Sold individually.
Product #
4300-32
False Front Clip
• Designed with staggered jaws to grip uneven wood sections.• Permits false front panel above sink doors to be easily snapped into place.• For 3/4” material. Install using staples or glue.• 100/box. Sold individually.
Product # Finish
1931-32 Clear
False Front Clip
• Permits false front panel above sink doors to be easily snapped into place.• For use with 3/4” thick face frame material.• Screws sold separately.• 100/box. Sold individually.
Product # Finish
1987-32 White
TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 209
To Order – Call 509.535.1663 or 800.888.1663Tray D
ividersKITCHEN ORGANIZERS
Tray Dividers
Tray Divider with Clips
• Available in 2 sizes: 12” for wall cabinets and 18” for base cabinets.• Each divider includes 4 screw-in polymer clips and fasteners.• 10/box. Sold individually.
Product # Height Depth Finish
597-12-10 12” 20” White
597-18-10 18” 20” White
597-12CR 12” 20” Chrome
597-18CR 18” 20” Chrome
Tray Dividers with Clips
• Installs easily with four attachment clips.• Heavy gauge 1/4” white steel wire.• Finish: White.• 1/box. Sold individually.
Product # Height Depth
TD12-W 12” 19-1/2”
TD18-W 18” 19-1/2”
U-Shaped Tray Dividers
New Item!• The sturdy construction and beautiful chrome finish provide durability
and style.• Easy four-screw installation.• 1/box. Sold individually.
Product # Width Height Depth
596-10CR-52 3” 10” 11-7/8”
Tra-Sta Tray Organizer
• Four prefinished maple veneer dividers slide in grooved and predrilled top and bottom rails.
• Easily trimmable to fit any size cabinet.• Set includes: 4 finished dividers and 8 drilled rails. Use #4 1/2” flat head
screws, NOT INCLUDED.• 1 set/box. Sold per set.
Product # Length Width
TS2424 24” 24”
Tray Divider Rollout
• All wood construction, clear-coated maple finish, and removable parti-tions.
• 100lb, full extension ball-bearing slides.• Pre-assembled, designed for 9”, 12” and 15” base cabinets.• 10”H x 21-3/4”D• 1/box. Sold individually.
Product # Width # of Dividers
T3194MNL1 5” 1
T3195MNL1 8” 2
T3196MNL1 11” 3
210 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERSW
ine, Stemw
are and Plate Racks
Wine, Stemware and Plate Racks
Plate Display Rack
• 36”L x 13-1/16”H x 1-1/2”W.• Fully assembled unit, boxed two pieces per carton (front and back).• Center 3 dowels are removable for easy cleaning of the cabinet.• 3/8” diameter dowels are spaced 2” on center.• Mouldings have trim area of 1-1/2” on each end.• 1 pr/box. Sold per pair.
Product # Species
NPD-36-CH Cherry
NPD-36-HI Hickory
NPD-36-MA Maple
NPD-36-RO Red Oak
WineLogic Wine Rack
SPECIAL ORDER• 16-1/4”W x 22-1/4”D - Minimum cabinet opening: 15” wide.• Fits into standard base cabinet.• Full extension, ball-bearing slides allow each tray to glide smoothly in
and out of the rack.• The bottom tray has a sturdy, 75 lb capacity, while the top trays max out
at 100 lbs each.• Horizontal design keeps corks remain moist and swelled.• Clear coated maple construction.• Made in the USA.• Available in 20-20 Design Software for interior designers.• 1/box. Sold individually.
Product # Capacity Height
WLMAPLE12 12 Bottle 7-3/8”
WLMAPLE18 18 Bottle 11”
WLMAPLE24 25 Bottle 14-5/8”
WLMAPLE30 30 Bottle 18-1/4”
Russian River Wine Rack
• The “X” rack folds down on itself and is height adjustable.• Designed for 18” & 24” cabinets.• 10-3/4” depth is trimmable for custom sizes.• Manufactured from 3/4” x 7/16” solid hardwood mouldings.• 1/box. Sold individually.
Product # Species Size
WS100QUF1 Alder 22-3/8” legs
WS100MUF1 Maple 22-3/8” legs
WS110QUF1 Alder 30-7/8” legs
WS110CUF1 Cherry 30-7/8” legs
WS110MUF1 Maple 30-7/8” legs
Wine Bottle Rack
• 48”L x 2”H.• Solid wood, sanded and ready to finish.• Holds eleven wine bottles and is easily trimmed for installation.• Boxed two pieces per carton (front and back).• 1 pr/box. Sold per pair.
Product # Species
S9200CUF1 Cherry
S9200HUF1 Hickory
S9200MUF1 Maple
TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 211
To Order – Call 509.535.1663 or 800.888.1663W
ine, Stemw
are and Plate RacksKITCHEN ORGANIZERS
Wine Bottle Lattice Panel
• Panels are 3/4” thick x 7/16” wide with radius edges.• Bottle openings are 4” x 4”.• Easily cut to desired size.• Boxed two pieces per carton (front and back).• 1 pr/box. Sold per pair.
Product # Species Width Height
WRL1736AL Alder 17” 36”
WRL1736CH Cherry 17” 36”
WRL1736HI Hickory 17” 36”
WRL1736MA Maple 17” 36”
WRL1736RO Red Oak 17” 36”
WRL2430AL Alder 30” 24”
WRL2430CH Cherry 30” 24”
WRL2430HI Hickory 30” 24”
WRL2430MA Maple 30” 24”
WRL2430RO Red Oak 30” 24”
WRL2443AL Alder 24” 43”
WRL2443CH Cherry 24” 43”
WRL2443HI Hickory 24” 43”
WRL2443MA Maple 24” 43”
WRL2443RO Red Oak 24” 43”
Stemware Rack
• 36”L x 12”W.• Solid wood, fully sanded and ready for finishing process.• Features 8 rows of storage and accommodates most stemware styles.• 1/box. Sold individually.
Product # Species
S9630OUF1 Red Oak
S9630MUF1 Maple
S9630QUF1 Alder
S9630CUF1 Cherry
S9630HUF1 Hickory
Stemware Rack
• 8mm heavy-gauge wire construction with a hidden mounting plate.• Inner width: 3-1/2”.• 1/box. Sold individually.
Product # Depth Width Height Finish
3150-11CR 11” 4-1/4” 1-1/2” Chrome
3150-11ORB 11” 4-1/4” 1-1/2” Oil Rubbed Bronze
3150-11SN 11” 4-1/4” 1-1/2” Satin Nickel
3150-16CR 16” 4-1/4” 1-1/2” Chrome
3150-16ORB 16” 4-1/4” 1-1/2” Oil Rubbed Bronze
3150-16SN 16” 4-1/4” 1-1/2” Satin Nickel
3150-18CR 18” 4-1/4” 1-1/2” Chrome
3150-18SN 18” 4-1/4” 1-1/2” Satin Nickel
Quad Stemware Rack
• 8mm heavy-gauge wire construction with a hidden mounting plate.• Inner width: 3-1/2”.• 1/box. Sold individually.
Product # Width Depth Height Finish
3450-11CR 17” 11” 1-1/2” Chrome
3450-11ORB 17” 11” 1-1/2” Oil Rubbed Bronze
3450-11SN 17” 11” 1-1/2” Satin Nickel
Double Bottle Rack
• 8mm heavy-gauge wire construction with a hidden mounting plate.• Inner width: 3-5/8”.• 1/box. Sold individually.
Product # Width Height Finish
3250CR 4-1/4” 9” Chrome
3250ORB 4-1/4” 9” Oil Rubbed Bronze
3250SN 4-1/4” 9” Satin Nickel
212 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERSA
ppliance Garages, W
ood Tambour and Track System
s
Appliance Garages, Wood Tambour and Track Systems
Corner Appliance Garage
• Overall Size: 17”W x 18-1/2”H x 11-7/8”D• Appliance garage for 24” corners.• Solid wood door mounted to solid wood face frame.• End panels MDF, plain-sliced veneer faced.• Spring Tension Track System features smooth, non-binding operation.• Prefabricated for simple installation.• 1/box. Sold individually.
Product # Species
AG-100CSAL Alder
AG-100CSH Hickory
AG-100CSM Maple
AG-100CSR Red Oak
Euro Corner Appliance Garage
• Overall Size: 17”W x 18-1/2”H x 11-7/8”D.• Modified solid-look painted tambour door on miter-folded face frame
with vinyl laminated end panels.• Spring Tension Track System (ST-2) with smooth, non-binding operation.• Prefabricated for simple installation.• 1/box. Sold individually.
Product # Finish
AG-200CW White
Tambour with Track System
• Includes: Tambour Door & Face Frame Style Spring Tension Track System.• 15” or 24” door width x 18” door & track height; 3/4” slats.• Track system consists of two PVC guide rails, wood dowel, donut(s), and
tension spring.• Dowels & tambour can be trimmed for narrower widths.• Track system easily stapled to back of face frame.• 1/box. Sold individually.
Product # Species Width Height
C02-SCH-1 Cherry 15” 18”
C02-SHI-1 Hickory 15” 18”
C02-SMA-1 Maple 15” 18”
C02-SRO-1 Red Oak 15” 18”
C02-SCH-2 Cherry 24” 18”
C02-SHI-2 Hickory 24” 18”
C02-SMA-2 Maple 24” 18”
Spring Tension Track System Only
• Face Frame Style Spring Tension Track System, easily stapled to back of face frame.
• Controls doors up to 36” W x 19” H x .220” thick.• Can be trimmed for narrower widths.• Approximate cabinet opening height: 16 1/2” (guiderail height: 17 1/2”)• Includes: two PVC guide rails, wood dowel, donuts, and tension spring.• NOTE: This product is white, pictured in almond.• 1/box. Sold individually.
Product # Finish
ST-2-36-WH White
TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 213
To Order – Call 509.535.1663 or 800.888.1663A
ppliance Garages, W
ood Tambour and Track System
sKITCHEN ORGANIZERS
Solid Wood Flat Tambourw/Beveled Edge
• 47” Slat length x 24”H or 36” H.• 3/16” H x 3/4” W slats.• Individual solid hardwood slat mouldings bonded to a cloth backer.• Cleaned, pre-flexed, sanded and ready to finish.• Includes: 1-1/2”W lead rail; 36” wide doors also include 1-1/2”W trail
slat.• 1 roll/box. Sold per roll.
Product # Species Height Slat Length
SW-30-AL504 Alder 24” 47”
SW-30-CH503 Cherry 24” 47”
SW-30-HI502 Hickory 24” 47”
SW-30-MA512 Maple 24” 47”
SW-30-RO511 Red Oak 24” 47”
SW-30-AL503 Alder 36” 47”
SW-30-HI506 Hickory 36” 47”
SW-30-CH514 Cherry 36” 47”
SW-30-MA508 Maple 36” 47”
SW-30-RO513 Red Oak 36” 47”
Tambour Track Systemfor 3/16” Tambour
• Accommodates almost any 3/16” thick tambour, thicker tambours must be tenoned.
• Designed for flush mounting in vertical or horizontal applications.• Can be fastened with 3/8” staples or pan head type screws (not in-
cluded).• Made of brown PVC.• 1/box. Sold individually.
Product # Description
T96-BROWN 96”L Track
C51-BR Track Corner
Solid Wood Flat Tambourw/Radius Edge
• 16”, 24”, 36” or 48” Slat lengths.• NOTE: Sold in 2ft. wide increments, will come as one continuous roll (up
to 8 feet).• 1/4” H x 3/4” W slats.• Individual solid hardwood slat moldings bonded to a strong polypropyl-
ene fabric backing.• Sanded and ready to finish.• 1 roll/box. Sold per roll.
Product # Species Slat Length
CT16FR Cherry 16”
CT24FR Cherry 24”
CT36FR Cherry 36”
CT48FR Cherry 48”
MT16FR Maple 16”
MT24FR Maple 24”
MT36FR Maple 36”
MT48FR Maple 48”
OT16FR Oak 16”
OT24FR Oak 24”
OT36FR Oak 36”
OT48FR Oak 48”
Tambour Track Systemfor 1/4” Tambour
• Accommodates almost any 1/4” thick tambour, thicker tambours must be tenoned.
• Designed for flush mounting in vertical or horizontal applications.• Can be fastened with 3/8” staples or pan head type screws (not in-
cluded).• Made of brown PVC.• 1/box. Sold individually.
Product # Description
4T54 48”L Track
4C55 Track Corner
214 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERSW
ood Breadboards, Cutting Boards and Accessories
Wood Breadboards, Cutting Boards and Accessories
Breadboard/Cutting Board
• Solid hardwood construction with an alder body.• Electronically laminated and sealed to resist moisture penetration.• Finger pull on each end allows board to be reversible, alder/oak.• Features 3/4” thick board and trimmable width for a custom fit.• 1/box. Sold individually.
Product # Width Depth
BB1622K 16” 22”
BB1822K 18” 22”
BB2422K 24” 22”
Breadboard Slides
• 13/16” channel to accommodates a 3/4” thick board.• Rear bracket can be bent 90° for face frame mounting.• Steel, Zinc plated.• 25 pr/box. Sold per pair.
Product # Length
1212112 22-1/2”
Knife Holder/Cutting Board Drawer System4KCB Series - Wood Classics
• Combination knife holder/cutting board with full-extension, ball-bearing slides.
• No drawer box needed, all you need is drawer front.• Adjustable depth, designed for 24” deep cabinets.• Features 3 divided sections and 7 slot knife holder.• Minimum opening height : 4-3/4”.• 1/box. Sold individually.
Product # Width Depth Height
4KCB-18 14-1/2” 22-1/4” 5”
4KCB-21 17-1/2” 22-1/4” 5”
4KCB-24 20-1/2” 22-1/4” 5”
Miscellaneous Organizers
Heavy Duty Mixer/Appliance Lift
• Features built-in shock dampers and 3 variable spring settings.• NEW! RAS-ML-HDSC: Soft-Close Damper allow it to glide back into the
cabinet gently and quietly.• Holds appliances up to 60 lbs.• Installation in full-height base cabinet only.• Shelf not included.• 1 set/box. Sold per set.
Product # Description Finish
RAS-ML-HDCR Heavy Duty Mixer Lift Silver
ML-HDSC Heavy Duty Mixer Lift w/Soft-Close Silver
TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 215
To Order – Call 509.535.1663 or 800.888.1663M
iscellaneous Organizers
KITCHEN ORGANIZERS
Mixer/Appliance Lift
• Swings out of the base cabinet and into its final position flush with the work surface and securely locked in position by a safety device.
• For unlocking and swinging-procedure, safety trigger has to be released with both hands.
• Tension spring provides for easy operation.Specifications:• Min. inside cabinet width: 10-7/8” to 22-7/8”.• Double spring mechanism for heavier loads and counter balanced lifting
capacity of 16 lbs. in motion, 25lbs. locked in final resting position.• 1 set/box. Sold per set.
Product # Finish
498-112-80-4151 White
3 Prong Pull-Out Towel Bar
• 3 prongs and 12” extension for accessibility.• Mounting is universal for horizontal or vertical installation.• Reversible for non-handed operation.• Includes 1 pull-out towel bar and mounting screws.• 1/box. Sold individually.
Product # Finish Width Depth Height
563-47 White 5” 17-3/4” 1-1/4”
563-47C Chrome 5” 17-3/4” 1-1/4”
3-Prong Pull-Out Towel Bar
• Features three bars that pull out together on a friction-free ball bearing carrier.
• Left or right hand mount.• Polished chrome finish.• 10/box. Sold individually.
Product # Length Width Height
P793ANO 17-3/4” 4-13/16” 1-5/16”
2 Prong Pull-Out Towel Bar
• 2 prongs and ball bearing extension for accessibility.• Reversible for non-handed operation.• Includes 1 pull-out towel bar and mounting screws.• Polished Chrome finish.• 1/box. Sold individually.
Product # Depth Width Height
563-51-C 12-7/8” 3-7/8” 1-1/4”
Door Mount Towel Holder
• Durable 3 tier white epoxy coated rack.• Installs easily with two screws.• White finish.• 10/box. Sold individually.
Product # Width Depth Height
TB-W 12-7/16” 3-3/8” 5-1/2”
216 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com
Builders Hardware Specialists Since 1945
KITCHEN ORGANIZERSM
iscellaneous Organizers
Undersink Drip TraySBDT Series
• Minimum trim size: 25-1/2”W x 21-1/2”D.• Designed for installation in new 30” sink base cabinet construction (can
be cut down).• Resistant to most household chemicals.• Wipes clean with ease.• 1/box. Sold individually.
Product # Finish Width Depth Height
SBDT-2730-S-1 Silver 28-1/2” 23-1/4” 3/4”
SBDT-3942-S-1 Silver 40-1/2” 23-1/4” 3/4”
Undersink Vanity Drip TraySBVDT Series
• Minimum trim size: 19-1/2”W x 18-1/2”D.• Designed for installation in new 24” vanity sink base cabinet construction
(can be cut down).• Resistant to most household chemicals.• Wipes clean with ease.• 1/box. Sold individually.
Product # Finish Width Depth Height
SBVDT-2124-S-1 Silver 22-1/2” 20-1/4” 3/4”
SBVDT-2730-S-1 Silver 28-1/2” 20-1/4” 3/4”
SBVDT-3336-S-1 Silver 34-1/2” 20-1/4” 3/4”
Cabinet Ventilating Louver
• Cabinet ventilating louver for apron above sink door.• Includes mounting screws and template.• Opening Size: 9”W x 2-1/2”H.• 10/box. Sold individually.
Product # Finish Length Height
12-26STN Polished Chrome 10-7/16” 2-7/8”
Notes