· kitchen designs. Caters for single oven tower, double oven tower, under bench mounted ovens or...

12
IMPACT CARCASE SYSTEM FOR THE CABINET MAKING INDUSTRY Brought to you by Häfele www.hafele.com.au

Transcript of  · kitchen designs. Caters for single oven tower, double oven tower, under bench mounted ovens or...

Page 1:  · kitchen designs. Caters for single oven tower, double oven tower, under bench mounted ovens or microwave cabinets. DRAWER CABINETS OVERHEAD CABINETS OVEN CABINETS PAGE PAGE Simplifying

IMPACT CARCASE SYSTEMFOR THE CABINET MAKING INDUSTRY Brought to you by Häfele

ww

w.h

afel

e.co

m.a

u

Page 2:  · kitchen designs. Caters for single oven tower, double oven tower, under bench mounted ovens or microwave cabinets. DRAWER CABINETS OVERHEAD CABINETS OVEN CABINETS PAGE PAGE Simplifying

IMPACT CARCASE SYSTEM / FOR THE CABINET MAKING INDUSTRY - 07.14

2

2350 MM KITCHEN

OVERVIEW.

Material: 16mm moisture resistant particle board 1mm IMPACT ABS edgeband (0.4mm edgeband to top and bottom edge of the cabinet ends and back - overhead cabinets only)

Finish: White satin melamine, white satin edgeband

All cabinet heights exclude the height of the adjustable feet. Dimensions: W x D x H

FLEXIBILITYIMPACT carcases can be used in more than one design, allowing for greater design flexibility. Also, a comprehensive range of quality accessories are available to complete your carcase system and complement your kitchen, bathroom, laundry, study or commercial space.

EFFICIENCYIMPACT carcases are ready to assemble and will save you time with cutting, edging and drilling. This allows for minimal preparation time, less wasted materials and a quicker installation process. The carcase units are also packed in cartons for ease of handling.

CONVENIENCEAll IMPACT carcase kits are pre-drilled and supplied with locating dowels for ease of assembly. All carcase kits are supplied with a hardware pack, including not only locating dowels, but also connecting screws, shelf supports, cabinet legs, Salice hinges and Alto soft close drawer hardware where applicable.

DURABILITYIMPACT carcases are made from Australian produced 16 mm moisture resistant whiteboard and are manufactured using a 1 mm ABS edgeband. This eliminates dark edges and improves the impact resistance.

SERVICEIn line with Häfele’s service-oriented standards, all IMPACT carcase units and drawer systems are available from stock with same day despatch.

Page 3:  · kitchen designs. Caters for single oven tower, double oven tower, under bench mounted ovens or microwave cabinets. DRAWER CABINETS OVERHEAD CABINETS OVEN CABINETS PAGE PAGE Simplifying

3

LAUNDRY BASE CABINETS

BASE CABINETS

A range of standard base, corner and blind corner cabinets.

Choose from 450 mm (4 drawer), 600 mm (3 drawer) or 900 mm (2 or 3 drawer) wide cabinets. Pre-drilled for Häfele Alto drawers.

From standard 720 mm high overhead cabinets to corner, rangehood and fridge cabinets. There is an overhead solution for all kitchen designs.

Caters for single oven tower, double oven tower, under bench mounted ovens or microwave cabinets.

DRAWER CABINETS

OVERHEAD CABINETS

OVENCABINETS

PAGE PAGE PAGE

PAGE

Simplifying laundry solutions. Ready to go laundry hamper, ironing board and broom cabinets.

For tall pantry solutions, choose between standard pantry, pull-out pantry or corner pantry cabinets.

10

0704 05 06

08-09PAGE

PAGE

TALL PANTRY CABINETS

Page 4:  · kitchen designs. Caters for single oven tower, double oven tower, under bench mounted ovens or microwave cabinets. DRAWER CABINETS OVERHEAD CABINETS OVEN CABINETS PAGE PAGE Simplifying

IMPACT CARCASE SYSTEM / FOR THE CABINET MAKING INDUSTRY - 07.14

4

Base corner cabinet

Base blind corner cabinet

Supplied with:> 2 Ends> 2 Top rails> 1 Base> 1 Fixed shelf> 2 Back> Fixing and mounting hardware> Salice hinges and mount plates> Adjustable feet

Supplied with:> 2 Ends> 2 Top rails> 1 Base> 1 Adjustable shelf> 1 Back> 1 Vertical rail> Fixing and mounting hardware> Salice hinges and mount plates> Adjustable feet> Shelf supports

Base corner cabinet Cat. No.

900 x 900 mm (900 x 900 x 560 x 720) 561.00.050

Base blind corner cabinet Cat. No.

1100 mm (1100 x 560 x 720) 561.00.051

Base cabinets

Supplied with:> 2 Ends> 2 Top rails> 1 Base> 1 Adjustable shelf> 1 Back> Fixing and mounting hardware> Salice hinges and mount plates> Adjustable feet> Shelf supports

Base cabinets Cat. No.

150 mm (150 x 560 x 720) 561.00.000

300 mm (300 x 560 x 720) 561.00.001

400 mm (400 x 560 x 720) 561.00.002

450 mm (450 x 560 x 720) 561.00.003

500 mm (500 x 560 x 720) 561.00.004

600 mm (600 x 560 x 720) 561.00.005

700 mm (700 x 560 x 720) 561.00.006

800 mm (800 x 560 x 720) 561.00.007

900 mm (900 x 560 x 720) 561.00.008

1000 mm (1000 x 560 x 720) 561.00.009

BASE CABINETS.

Page 5:  · kitchen designs. Caters for single oven tower, double oven tower, under bench mounted ovens or microwave cabinets. DRAWER CABINETS OVERHEAD CABINETS OVEN CABINETS PAGE PAGE Simplifying

5

DRAWER CABINETS.

Drawer cabinet 450 mm

Drawer cabinets 600 mm

Drawer cabinets 900 mm

Alto drawer cabinet Cat. No.

4 Drawer 450 mm (450 x 560 x 720) 561.00.028

Alto drawer cabinet Cat. No.

3 Drawer 600 mm (600 x 560 x 720) 561.00.029

Alto drawer cabinet Cat. No.

2 Drawer 900 mm (900 x 560 x 720) 561.00.030

3 Drawer 900 mm (900 x 560 x 720) 561.00.031

Supplied with:> 2 Ends> 2 Top rails> 1 Base> 1 Back> Fixing and mounting hardware> Alto drawers

(Silver Metallic finish)> Drawer backs and bases> Adjustable feet

Supplied with:> 2 Ends> 2 Top rails> 1 Base> 1 Back> Fixing and mounting hardware> Alto drawers

(Silver Metallic finish)> Drawer backs and bases> Adjustable feet

Supplied with:> 2 Ends> 2 Top rails> 1 Base> 1 Back> Fixing and mounting hardware> Alto drawers

(Silver Metallic finish)> Drawer backs and bases> Adjustable feet

Page 6:  · kitchen designs. Caters for single oven tower, double oven tower, under bench mounted ovens or microwave cabinets. DRAWER CABINETS OVERHEAD CABINETS OVEN CABINETS PAGE PAGE Simplifying

IMPACT CARCASE SYSTEM / FOR THE CABINET MAKING INDUSTRY - 07.14

6

Overhead cabinets

Wall cabinet Cat. No.

150 mm (150 x 300 x 720) 561.02.014

300 mm (300 x 300 x 720) 561.02.015

400 mm (400 x 300 x 720) 561.02.016

450 mm (450 x 300 x 720) 561.02.017

500 mm (500 x 300 x 720) 561.02.018

600 mm (600 x 300 x 720) 561.02.019

700 mm (700 x 300 x 720) 561.02.020

800 mm (800 x 300 x 720) 561.02.021

900 mm (900 x 300 x 720) 561.02.022

OVERHEAD CABINETS.

Supplied with:> 2 Ends> 1 Top> 1 Base> 2 Adjustable shelves> 1 Back> Fixing and mounting hardware> Salice hinges and mount plates> Shelf supports

Overhead corner cabinet

Wall corner cabinet Cat. No.

600 x 600 mm (600 x 600 x 720) 561.02.050

Supplied with:> 2 Ends> 1 Top> 1 Base> 2 Adjustable shelves> 1 Back> Fixing and mounting hardware> Salice hinges and mount plates> Shelf supports

Overhead rangehood cabinet Cat. No.

600 mm (600 x 300 x 545) 561.02.036

Supplied with:> 2 Ends> 1 Top> 1 Base> 1 Back> Fixing and mounting hardware> Salice hinges and mount plates

Overhead fridge cabinet

Overhead wall fridge cabinet Cat. No.

900 mm (900 x 300 x 400) 561.02.003

1000 mm (1000 x 300 x 400) 561.02.004

Supplied with:> 2 Ends> 1 Top> 1 Base> 1 Back> Fixing and mounting hardware> Salice hinges and mount plates> Duo flap stay set

Rangehood cabinet

Page 7:  · kitchen designs. Caters for single oven tower, double oven tower, under bench mounted ovens or microwave cabinets. DRAWER CABINETS OVERHEAD CABINETS OVEN CABINETS PAGE PAGE Simplifying

7

TALL PANTRY CABINETS.

Supplied with:> 2 Ends> 1 Top> 1 Base> 1 Fixed shelf> 4 Adjustable shelves> 1 Back> Fixing and mounting hardware> Salice hinges and mount plates> Shelf supports> Adjustable feet

Supplied with:> 2 Ends> 1 Top> 1 Base> 1 Fixed shelf> 1 Back> Fixing and mounting hardware> Shelf supports> Adjustable feet

Supplied with:> 1 Left hand end> 1 Right hand end> 1 Top> 1 Fixed shelf> 4 Adjustable shelves> 1 Back, 961 mm> 1 Back, 977 mm> Fixing and mounting hardware> Salice hinges and mount plates> Shelf supports

Tall pantry cabinets

Tall pantry pull-out cabinet

Corner pantry cabinet ends

Tall pantry cabinet Cat. No.

450 mm (450 x 560 x 2200) 561.01.027

600 mm (600 x 560 x 2200) 561.02.029

900 mm (900 x 560 x 2200) 561.01.032

Tall pantry pull-out cabinet Cat. No.

300 mm (300 x 560 x 2200) 561.01.025

Cat. No.

Pack A - Ends, top and backs (1010 x 560 x 2350)

561.01.050

Pack B - Adjustable shelves (959 x 959) 561.01.051

Page 8:  · kitchen designs. Caters for single oven tower, double oven tower, under bench mounted ovens or microwave cabinets. DRAWER CABINETS OVERHEAD CABINETS OVEN CABINETS PAGE PAGE Simplifying

IMPACT CARCASE SYSTEM / FOR THE CABINET MAKING INDUSTRY - 07.14

8

OVEN CABINETS.

Single oven tower cabinet

Double oven tower cabinet

Supplied with:> 2 Ends> 2 Base> 2 Back> 2 Top rails> 1 Adjustable shelf> 3 Fixed shelf> Fixing and mounting hardware> Salice hinges and mount plates> Adjustable feet> Shelf supports

Supplied with:> 2 Ends> 2 Base> 2 Back> 2 Top rails> 2 Adjustable shelf> 2 Fixed shelf> Fixing and mounting hardware> Salice hinges and mount plates> Adjustable feet> Shelf supports

Single oven tower cabinet Cat. No.

600 mm (600 x 560 x 2200) 561.01.011

Double oven tower cabinet Cat. No.

600 mm (600 x 560 x 2200) 561.01.014

Page 9:  · kitchen designs. Caters for single oven tower, double oven tower, under bench mounted ovens or microwave cabinets. DRAWER CABINETS OVERHEAD CABINETS OVEN CABINETS PAGE PAGE Simplifying

9

Base oven cabinets

Supplied with:> 2 Ends> 2 Top rails> 1 Base> 1 Fixed shelf> Fixing and mounting hardware> Adjustable feet

Base oven cabinet Cat. No.

600 mm (600 x 560 x 720) 561.00.012

900 mm (900 x 560 x 720) 561.00.013

Microwave cabinets

Supplied with:> 2 Ends> 1 Top> 1 Base> 1 Back> Fixing and mounting hardware

Microwave cabinet Cat. No.

600 mm Aluminium edge (600 x 360 x 464) 561.02.001

600 mm White edge (600 x 360 x 464) 561.02.002

Page 10:  · kitchen designs. Caters for single oven tower, double oven tower, under bench mounted ovens or microwave cabinets. DRAWER CABINETS OVERHEAD CABINETS OVEN CABINETS PAGE PAGE Simplifying

IMPACT CARCASE SYSTEM / FOR THE CABINET MAKING INDUSTRY - 07.14

10

LAUNDRY CABINETS.

Laundry base cabinets

Ironing board cabinet

Hamper base cabinet Cat. No.

450 mm (450 x 560 x 720) 561.01.018

600 mm (600 x 560 x 720) 561.01.020

Ironing board cabinet Cat. No.

450 mm (450 x 560 x 720) 561.01.016

Supplied with:> 2 Ends> 2 Top rails> 1 Base> 1 Back> Hamper unit> Flap stay> Fixing and mounting hardware> Salice hinges and mount plates> Adjustable feet

Supplied with:> 2 Ends> 2 Top rails> 1 Base> 1 Back> 1 Ironing board> Fixing and mounting hardware> Salice hinges and mount plates> Adjustable feet

Supplied with:> 2 Ends> 1 Top> 1 Base> 1 Back> 1 Fixed shelf> 4 Small shelves> 1 Vertical divider> Fixing and mounting hardware> Salice hinges and mount plates> Shelf supports> Adjustable feet

Tall broom laundry cabinets

Tall broom cabinet Cat. No.

600 mm (600 x 560 x 2200) 561.01.012

900 mm (900 x 560 x 2200) 561.01.015

Page 11:  · kitchen designs. Caters for single oven tower, double oven tower, under bench mounted ovens or microwave cabinets. DRAWER CABINETS OVERHEAD CABINETS OVEN CABINETS PAGE PAGE Simplifying

11

LARGE VARIETY OF COLOURS AND STYLES

The IMPACT Project Door range offers a variety of choices and combinations to suit anyone’s design. Whether you are looking for a high gloss contemporary finish, a traditional look or anything in between.

Häfele IMPACT Project Doors are 18 mm thick with a white melamine back and are available in 7 standard colours with gloss, satin and textured finishes.

Contact your local Häfele representative for the complete program.

IMPACT PROJECT DOORS & PANELS.

Page 12:  · kitchen designs. Caters for single oven tower, double oven tower, under bench mounted ovens or microwave cabinets. DRAWER CABINETS OVERHEAD CABINETS OVEN CABINETS PAGE PAGE Simplifying

IMPACT CARCASE SYSTEM / FOR THE CABINET MAKING INDUSTRY - 07.14

12

732.04.601 IMPACT CARCASE BROCHURE - 07.2014

Häfele Australia Pty. Ltd. | 8 Monterey Road | Dandenong | Victoria 3175Phone: 1300 659 728 | Fax: (03) 9212 2001 | Email: [email protected]

HÄFELE LOCATIONS: MELBOURNE I SYDNEY I NEWCASTLE I BRISBANE I ADELAIDE I LAUNCESTON I HOBART I PERTH

www.hafele.com.au