KIPCUT C7800 IN-LINE CUT & TRIM SYSTEM

SYSTEM FEATURES• VERTICAL (X) AND LONGITUDINAL (Y) CUTTINGS• CUT SPEED PERFECTLY ADAPTED THE PRINT SPEED• AUTOMATIC CUTTING FROM 297 MM TO 914 MM• CUT ACCURACY: +/- 1 MM• SELF-SHARPENING BLADES• 3 LATERAL BLADES • OPTION TO ADD EXTRA BLADES• PRESENCE OF OPTICAL SENSORS FOR CUTTING

ALIGNMENT ON TRANSVERSAL AXIS (X) AND LONGITUDINAL AXIS (Y)

The KIPCut C7800 in-line wide format cut & trim system offers accuracy, speed and performance based on advanced finishing technology.

Thanks to this complete solution, wide format graphics, posters & displays are printed and cut to bleed, eliminating the white edges around colorful images. The system reads embedded crop marks in the length and width of the print to perfectly align the cutting blades to deliver highly accurate parallel trimming to the nearest millimeter.

The KIPCut C7800 is also equipped with vertical blades to enable several prints to be produced on a single sheet, maximizing media effi ciency.

KIPCut C7800

SPECIFICALLY DESIGNED FOR THE KIP C7800, THE IN-LINE KIPCUT SYSTEM PERFORMS QUICK & EASY HORIZONTAL AND VERTICAL CUTS.

TRANSPORT ROLLERS DRIVEN BY A STEPPER MOTOR PRESSURIZE THE MEDIA TO KEEP IT PERFECTLY STRAIGHT

DIRECT ACCESS TO THE SYSTEM FUNCTIONS FROM THE INTERACTIVE CONTROL PANEL

The KIPCut C7800 in-line wide format cut & trim system offers accuracy,

The KIPCut C7800 addresses many applications where the need for permanent & professional displays are necessary: colourful banners, bulletins, & signs posted in hallways or placed in windows attract attention while large, full colour business-style graphics deliver the right message at meetings, sales presentations, and public viewing areas.

DEDICATED TO GRAPHICS APPLICATIONS

PHOTOGRAPHY

BANNERS

DISPLAY GRAPHICSPOINT OF

PURCHASE

PHOTOGRAPHY

DISPLAY

BANNERS

Example of poster printing Format 40 x 60 cm CUTTING MARKS OF LATERAL CUTTERS

CUTTING

MARKS

OF THE TRANSVERSAL

CUTTER

CUTTING

MARKS

OF THE

CENTER

LATERAL CUTTER

BLEED

WIDTH 914 MM

REMAINING WHITE MARGIN

PRODUCT FEATURESDEDICATED CUTTER DESIGNED FOR THE KIP C7800 DIRECT ACCESS VIA CONTROL PANELX & Y CUTTER 3 LATERAL BLADESSELF SHARPENING BLADES OPTICAL SENSORS FOR CUTTING ALIGNMENT

PRODUCT INFORMATIONPRINT SYSTEMS THE KIPCUT SYSTEM IS CONSIDERED TO BE “IN-LINE” WITH THE KIP C7800 PRINTER.

SYSTEM SOFTWARE THE KIPCUT SYSTEM REQUIRES EITHER CALDERA GRAND RIP* OR EFI FIERY XF FOR KIP C7800 SOFTWARE FOR OPERATION

CUT MODES EIGHT (8) PROGRAMMABLE MODESSTANDARD Y KNIFES 2 SINGLE (OUTSIDE)OPTIONAL Y KNIFES 1 DUAL WITH A STANDARD 8 MM GAP / 2 SINGLE KNIVES WITH A MINIMUM OF 9 MM GAPMEDIA THICKNESS UP TO 0.5 MM MEDIA TYPES BONDS, PHOTO GLOSS PAPER, TECHNICAL AND GRAPHIC VELLUMS, FILMS, BILLBOARD BLUE BACKMEDIA WIDTHS MIN: 297 MM / MAX: 914 MM

MAXIMUM FEEDING LENGTH 6 M

MINIMUM FEEDING LENGTH 665 MM PRINT STACKING VOLUME UP TO 200 PAGESPRINT STACKING PAGE SIZE MIN: 80 CM / MAX: 150 CMCUT / FEEDING VARIANCE +/- 1 MILLIMETER

* WITH NESTOBA OPTION

www.kip.com

KIP39575 W. 13 Mile Road

Novi, MI. 48377USA

www.konicaminolta.eu

Konica Minolta Business Solutions Europe GmbH

Europaallee 17 · 30855 Langenhagen Germany

KIP is a registered trademark of the KIP Group. All other product names mentioned herein are trademarks of their respective companies. All product features and specifications are subject to change without notice. Complete product specifications are available upon request. © 2012 04

/201

3