Kinetrol Clear Cone Monitor & Solenoid Valve Cut Sheet

20 Clear Cone Monitors & Solenoid Valves Clear Cone Monitor The optional Clear Cone provides all round high visibility position monitoring on all limit switch boxes and positioner models. A red/green colour coded monitor is sealed inside a robust, clear polycarbonate cover. Positioner models are marked with black printed legible angle scales. The monitor is also available directly mounted onto actuator models 03, 05, 07, 08, 09 and 10, all EHD units and 12, 14 & 15 using an adaptor plate. For highly corrosive environments special cover materials are available - contact Kinetrol for details. Conductive ATEX approved versions (to category 1) are also available - contact Kinetrol for details. For dimensions see pages 53, 54, 55 & 56. Solenoid Valves As an option Kinetrol actuator sizes 03 to 15 can be supplied with integral solenoid valves with NAMUR interface. Air is ported through the actuator body via an adaptor so no external tubing is necessary. Standard optional solenoid valves can be converted to 5 or 3 port versions by changing the valve body plate supplied with the valve. Specification Coil Voltages AC: 50/60Hz 110v AC, 240v AC and 24v DC For other voltages contact Kinetrol Electrical DIN 43650 plug with Pg9 cable Connection gland (6-8mm dia) as standard Manual Override extra to order Exhaust Silencers extra to order / Flow Regulators Hazardous Areas certified solenoids are available as extras to order Environmental to IP65 as standard Protection Minimum Air 2 bar Supply Single solenoid, 3 or 5 port, interchangeable for double acting or spring return, NAMUR interface. Most brands of NAMUR interface solenoid valve can be supplied to special order. VALVE BODY PLA TE ADAPTOR COIL CAN BE TURNED IN 90° INCREMENTS 115 85 G 1/4 INLET (PLUGGED FOR TRANSPORT) 5 PORT SOL. VALVE (ACTUATOR VANE MOVES ANTI-CLOCKWISE WHEN COIL IS ENERGISED - FOR CLOCKWISE MOVEMENT SOL. VALVE IS TURNED THRO' 180°) OPTIONAL EXHAUST SILENCERS

Upload
kinetrol-usa
Category

Engineering
view
244
download
1

Embed Size (px):

Transcript of Kinetrol Clear Cone Monitor & Solenoid Valve Cut Sheet

Clear C

one Monitors

& Solenoid Valves

Clear Cone MonitorThe optional Clear Cone provides all round highvisibility position monitoring on all limit switch boxesand positioner models. A red/green colour codedmonitor is sealed inside a robust, clear polycarbonatecover. Positioner models are marked with black printedlegible angle scales.

The monitor is also available directly mounted ontoactuator models 03, 05, 07, 08, 09 and 10, all EHDunits and 12, 14 & 15 using an adaptor plate.

For highly corrosive environments special covermaterials are available - contact Kinetrol for details.

Conductive ATEX approved versions (to category 1)are also available - contact Kinetrol for details.

For dimensions see pages 53, 54, 55 & 56.

Solenoid Valves

As an option Kinetrol actuator sizes 03 to 15 canbe supplied with integral solenoid valves with NAMURinterface. Air is ported through the actuator body viaan adaptor so no external tubing is necessary.

Standard optional solenoid valves can be convertedto 5 or 3 port versions by changing the valve bodyplate supplied with the valve.

Specification

Coil Voltages AC: 50/60Hz110v AC, 240v AC and 24v DCFor other voltages contactKinetrol

Electrical DIN 43650 plug with Pg9 cableConnection gland (6-8mm dia) as standard

Manual Override extra to order

Exhaust Silencers extra to order/ Flow Regulators

Hazardous Areas certified solenoids areavailable as extras to order

Environmental to IP65 as standardProtection

Minimum Air 2 barSupply

Single solenoid, 3 or 5 port, interchangeable fordouble acting or spring return, NAMURinterface. Most brands of NAMUR interfacesolenoid valve can be supplied to special order.

VALVE BODYPLA TE

ADAPTOR

COIL CAN BE TURNEDIN 90° INCREMENTS

115

G 1/4 INLET(PLUGGED FOR TRANSPORT)

5 PORT SOL. VALVE(ACTUATOR VANE MOVESANTI-CLOCKWISE WHEN COIL ISENERGISED- FOR CLOCKWISE MOVEMENTSOL. VALVE IS TURNED THRO' 180°)

OPTIONAL EXHAUST SILENCERS