KID’S PLACEMAT PROJECT INSTRUCTIONS … › tutorials › starbird_inc › ...KID’S PLACEMAT...
Transcript of KID’S PLACEMAT PROJECT INSTRUCTIONS … › tutorials › starbird_inc › ...KID’S PLACEMAT...
KID’S PLACEMAT PROJECT INSTRUCTIONS
www.starbirdstockdesigns.com 1
Materials: • 9 panels of fabric applique
pieces (use the sew placement line for size of material) Dk Green felt for Car Placemat, Green felt for Easter Placemat & White felt for Christmas Placemat
• Tearaway backing (2 pieces per design)
• Scissors (regular or small) These instructions will work for any of our Kid’s Placemat Packs and for illustration purposes
we used the Kid’s Car Placemat Design Pack.
The numbers above and below match the name of each design in each pack.
For example: #1 in the above left design is the design named Car Placemat Panel 1.
KID’S PLACEMAT PROJECT INSTRUCTIONS
www.starbirdstockdesigns.com 2
Step 1:
Hoop 2 pieces of tear-away backing.
Step 2:
Embroider each panel one by one. Once the panel(s) are done
embroidering, gently separate the design from the backing.
Step 3:
Place panels in order on your table or work space.
KID’S PLACEMAT PROJECT INSTRUCTIONS
www.starbirdstockdesigns.com 3
Step 4:
From the bottom left corner to top left corner sew the 3 panels
together using a zig zag stitch. Then sew the middle 3 panels from
bottom to top and the right side 3 panels bottom to top.
Make sure to reinforce the ends
with a few back stitches to hold the ends together.
Step 5: Sew the left 3 panel section to the middle 3 panel section using a zig zag stitch. Then sew the middle to
the right section also using a zig zag stitch.
Make sure to reinforce the ends
with a few back stitches to hold the ends together.
KID’S PLACEMAT PROJECT INSTRUCTIONS
www.starbirdstockdesigns.com 4
Step 6:
Now your placemat is ready for the kids, but wait they need cars to
drive on the roads. On to the next step.
Step 7: Hoop 2 pieces of tearaway backing
and sew each of the 3 cars.
Step 8: Remove the design
from the hoop. Remove the tearaway
from edges of the design.
KID’S PLACEMAT PROJECT INSTRUCTIONS
www.starbirdstockdesigns.com 5
Step 9:
Take your small scissors and cut a slit down the center of both openings at the front and back
windshields.
Step 10:
Insert your silverware.
Completed Placemat Completed Cars
Thank you for your purchase.