KF-AIV Threaded & Flanged Isolator Valves Threaded & Flanged Isolator Valves For Testing or...
Transcript of KF-AIV Threaded & Flanged Isolator Valves Threaded & Flanged Isolator Valves For Testing or...
-
KF-AIV Threaded &Flanged Isolator Valves
For Testing or Isolation of Safety Relief Valves, Pressure Transmitters,Gauges & Control Valves Without Removal or Shutdown of System.
-
KF has combined their field proven Series B/BH threaded end ballvalves to create this high pressure Isolator Valve. Up to 5000 psi tobe exact. Utilizing a second Series B/BH ball valve for side valvecontrol of testing media. Available in 1" or 2" sizes andmay be trimmed with optionally availableStainless Steel Ball and Stemfor NACE conformance.
KFs Standard Series threaded end Isolator Valve offersdependable isolation performance at an economical price.The Standard KF-AIV seal-welded Body and SideValve virtually eliminates all atmosphericleaks thru the Body. Male x FemaleNPT threaded ends allow forquick installation.
Series B/BHStandard
383 - X X X X X X X X 9
3 1"RP5 2"RP4 1500 (2"RP)5 2000 (1"RP)1 Carbon Steel2 Stainless Steel2 Stainless Steel2 Teflon
3 RTFE1 Locking Handle1 Includes Upstream Port (1/4" NPT plugged)9 Standard9 Standard
Size (Ma
le x Fem
ale) NPT
Pressure
Rating
(CWP)
Body M
aterial
Ball/Ste
m Mater
ial
Seat Ma
terial
Seal Ma
terial
Handle
Configu
ration
AssemblyBase No. Main Valve KF Standard Valve
Side Valve KF Standard Valve 380 - X X X X X X X X 9
3 1"RP5 2"RP6 2250 (Teflon seat)7 30009 5000 (1" only)1 Carbon Steel2 Stainless Steel1 Carbon Steel2 Stainless Steel (Required for NACE conformance)1 Delrin2 Teflon (2250 CWP, max)3 HT41 Buna N2 Viton 7 Aflas9 None (Teflon seat only)1 Locking Handle1 Includes Upstream Port (1/4" NPT plugged)9 StandardD Deleted Side Valve*9 Standard
Size (Ma
le x Fem
ale) NPT
Pressure
Rating
(CWP)
Body M
aterial
Ball/Ste
m Mater
ial
Seat Ma
terial
Seal Ma
terial
Handle
Configu
ration
AssemblyBase No.
*Includes 2 ea. 1/4" NPT plugged ports in the downstream (female) adapter.Side Valve Note (CS): Standard valve for all variations of Std. CS Body Series with Main Valve TrimPN: 6100 - 12223 CS/SS/TFE/LKG HDLSide Valve Note (Other): Standard valve for all variations of LCC, Enduro-Bond (CS), SS Body Series with Main Valve TrimPN: 6100-22223 SS/SS/TFE/LKG HDL
Main Valve KF Series B/BHSide Valve KF Series B/BH
StandardKFs Standard Series threaded end Isolator Valve offersdependable isolation performance at an economical price.The Standard KF-AIV seal-welded Body and SideValve virtually eliminates all atmosphericleaks thru the Body. Male x FemaleNPT threaded ends allow forquick installation.
1"RP and 2"RP 1500 (2") and 2000 (1") MOP CS or SS Body Seal-welded two-piece Body & Side Valve Locking Handles RTFE Seats & Teflon Seals
Series B/BHKF has combined their field proven Series B/BH threaded end ballvalves to create this high pressure Isolator Valve. Up to 5000 psi tobe exact. Utilizing a second Series B/BH ball valve for side valvecontrol of testing media. Available in 1" or 2" sizes andmay be trimmed with optionally availableStainless Steel Ball and Stemfor NACE conformance.
1"RP and 2"RP 2250, 3000 and 5000 MOP CS or SS Body Optional NACE Conformance Three-piece Body Locking Handles Optional Seat & Seal Material
Dont Shut Down Your System ForTesting Safety Relief Valves... Isolate It!
The KF-AIV enables isolation of the safety relief valve fromthe pressure source for relieving set point verification of thesafety relief valve without shutdown or removal.
Material Option Note: Suffix options of Assembly Part No. refers to trim of both valves.
Features
2 KF-AIV Threaded & Flanged Isolator Valves
-
Specify KFs Series F flanged end Isolator Valve for flangedapplications where high performance, safety and piping cost are bigfactors. The KF Series B ball valve allowsfor easy side valve control of media.Available in 1" thru 6" sizes and classes150, 300, 600 and 900 MOP.
KFs Series CH/CXH threaded end ball valve makes upthis Heavy Duty Isolator Valve when combinedwith a dependable Series B ball valve forside valve control. Available in 1"RP,11/2"RP and 2"RP sizes. StainlessSteel Ball and Stem are optionallyavailable for NACE conformance.
Series FSeries CH/CXH
3 1"RP4 11/2"RP5 2"RP7 30009 50001 Carbon Steel2 Stainless Steel3 Enduro-Bond (CS only)1 Carbon Steel2 Stainless Steel (Required for NACE conformance)1 Delrin3 HT41 Buna N2 Viton 7 Aflas1 Locking Handle1 Includes Upstream Port (1/4" NPT plugged)9 StandardD Deleted Side Valve*9 Standard
Size (Ma
le x Fem
ale) NPT
Pressure
Rating
(CWP)
Body M
aterial
Ball/Ste
m Mater
ial
Seat Ma
terial
Seal Ma
terial
Handle
Configu
ration
AssemblyBase No.
384 - X X X X X X X X 9*Includes 2 ea. 1/4" NPT plugged ports in the female end.
Main Valve KF Series CH/CXHSide Valve KF Series B 382 - X X X X X X X X 9
Main Valve KF Series FSide Valve KF Series B
AssemblyBase No.
3 1" FP (See Data Pg. 5)4 11/2" FP 5 2"RP 6 21/2"RP 7 3"RP 1 1502 3003 600 RF1 Carbon Steel2 Stainless Steel3 Enduro-Bond (CS only)8 LCC1 Carbon Steel2 Stainless Steel (Required for NACE Conformance)1 Nylon2 Teflon
1 Buna N2 Viton
1 Locking Handle1 Includes Upstream Port (1/4" NPT plugged)9 StandardD Deleted Side Valve** 2 NACE II (Requires SS Trim)9 Standard (SS Trim, NACE III)
8 4"RP9 6"RPA 2"FPB 3"FPC 4"FP
Flange S
ize
Pressure
Class
Body M
aterial
Ball/Ste
m Mater
ial
Seat Ma
terial
Seal Ma
terial
Handle
Configu
ration
4 600RTJ5 900RF*6 900RTJ*
4 HT4
7 Aflas
*1"FP, 2"RP & FP only. **Includes 1 ea. 1/4" NPT plugged port in the downstream (adapter-end) flange.
Series FSpecify KFs Series F flanged end Isolator Valve for flangedapplications where high performance, safety and piping cost are bigfactors. The KF Series B ball valve allowsfor easy side valve control of media.Available in 1" thru 6" sizes and classes150, 300, 600 and 900 MOP.
Series CH/CXHKFs Series CH/CXH threaded end ball valve makes upthis Heavy Duty Isolator Valve when combinedwith a dependable Series B ball valve forside valve control. Available in 1"RP,11/2"RP and 2"RP sizes. StainlessSteel Ball and Stem are optionallyavailable for NACE conformance.
1"RP, 11/2"RP and 2"RP 3000 and 5000 MOP CS, Enduro Bond(CS) or SS Body Optional NACE Conformance Two-piece NPT (Main Valve)
Three-piece NPT (Side Valve) Locking Handles Optional Seat & Seal Material
1"FP thru 6"RP Classes150, 300, 600 and 900 MOP Optional Body & Trim Material Optional NACE Conformance RF, RTJ (Main Valve)
NPT (Side Valve) Locking Handles Optional Seat &
Seal Material
When the safety relief valve is tested, the KF-AIV is locked inthe closed position enabling the test media to be connected tothe port below the safety relief valve. Pressure is then applied to
the safety relief valve through the test port until relieving setpressure is verified. After set pressure is verified test port islocked closed and the Isolator Valve is locked in open position.
Features
3KF-AIV Threaded & Flanged Isolator Valves
-
Shut Downs Are Costly...
...So Why Do It?Install the KF-AIV Isolator Valve in
your system for testing safety relief
valves and start saving today.
Dimensional Data
Standard Series B/BH
DimensionSize (In.)
1 2A .88 1.50B 3.98 5.30B1 5.90D 1.61 2.76F 2.56 3.17G 5.83 7.76
Size (In.)Dimension 1RP 2RP
1 x 3/4 2 x 11/2
Weight (lbs.) w/Handle 2.5 10.75A 3/4 1 1/2B FxM 4 11/16 6 13/16C 2 9/16 3 11/16F Standard Handle 3 3/4 4
Locking Handle 2 3/8 3 15/16G Standard Handle 57/8 11
Locking Handle 4 5/16 12Y 3 29/32 417/32Z 513/32 6 7/16
Dimensional Data
Dimensional Data
4
B1
D
1.68"
.88"
Notes: Working Pressure: 1" NPT-2000 WOG. 2" NPT-1500 WOG.
.54"
Weld
1/4" NPT
GB
1.87"
F
4.23"
.25"
.36"
Optional UpstreamPort (2" Only)
APort
MaleNPT
FemaleNPT
CB
F
G
APort
Z
Y
Notes:1. Delrin & HT4 Seats-3000 CWP, 5000 CWP (1" only).2. Teflon Seats-2250 CWP.
1/4" NPT Optional UpstreamPort Illustrated.
MaleNPT
FemaleNPT
KF-AIV Threaded & Flanged Isolator Valves
-
KF Series F 1"FP Class 150 Port Option DimensionsLay Length/Flange Thickness (In.) Length Upstream Downstream
Downstream Port Only (Std. Configuration) 5 5/16 9/16 11/16Complete w/Upstream Port Option 6 1/2 11/16 11/16Standard API 6D Valve (Reference) 5 9/16 9/16
Series F Option Data
Dimensional DataSize (In.)
Dimension 1FP 11/2RP 2RP1 x 1 11/2 x 1 2 x 1
Weight (lbs.) w/Handle 4.5 13 12.5A 7/8 11/4 11/2B 4 51/2 51/2C 2 2 3/4 2 3/4F 3 1/16 5 5/8 5 5/8G 61/4 81/2 81/2Y 4 5/32 4 21/32 4 5/8Z 615/32 6 31/32 615/16
Dimensional Data
Size (In.)
Dim. / Class 1FP 11/2FP 2RP 2FP 21/2RP 3RP 3FP 4RP 4FP 6RP1 x 1 11/2 x 1 2 x 11/2 2 x 2 21/2 x 2 3 x 2 3 x 3 4 x 3 4 x 4 6 x 4
Wt. (lbs.) 150 19 22.7 25.9 32.1 39.5 43.4 58.5 87.8 99.5 116.5
w/Hdl. 300 24 27.8 30.3 36.8 45.7 54.5 80.8 106.8 131.5 164.5
600 27 32.4 37.0 43.5 54.9 63.6 91.1 135.8
900 30 44.9 53.2
A 1 11/2 11/2 2 2 2 3 3 4 4
B RF 150 5 5/16 61/2 7 7 71/2 8 8 9 9 101/2
RF 300 61/2 7 1/2 81/2 81/2 91/2 111/8 111/8 12 12 15 7/8
RF 600 81/2 91/2 111/2 111/2 13 14 14 17
RTJ 600 81/2 91/2 115/8 115/8 131/8 141/8 141/8 17 1/8
RF 900 10 141/2 141/2
RTJ 900 10 14 5/8 14 5/8
C RF 150 2 5/16 211/16 23/4 23/4 215/16 31/8 3 5/8 31/16 315/16 45/8
RF 300 3 1/2 3 9/16 41/8 41/8 411/16 513/16 5 7/16 5 7/8 6 6
RF 600 33/4 3 7/8 4 7/16 4 7/16 415/16 6 5 3/4 73/4
RTJ 600 33/4 3 7/8 41/2 41/2 5 61/16 513/16 7 13/16
RF 900 4 3/4 73/16 73/16
RTJ 900 4 3/4 7 5/16 7 5/16 D 150 41/4 5 6 6 7 71/2 71/2 9 9 11
300 4 7/8 61/8 6 1/2 6 1/2 71/2 81/4 81/4 10 10 121/2
600 4 7/8 61/8 6 1/2 6 1/2 71/2 81/4 81/4 10 3/4
900 57/8 81/2 81/2
F150/300/600 43/16 55/8 55/8 61/16 61/16 61/16 7 1/4 7 1/4 8 1/4 8 1/4
F 1500 41/2
G 57/8 81/2 81/2 81/2 81/2 81/2 15 15 18 18
Y 150 5 5 3/8 5 7/8 5 7/8 6 3/8 6 5/8 6 5/8 7 3/8 7 3/8 8 3/8
300 4 9/16 515/16 61/8 61/8 6 5/8 7 7 7 7/8 7 7/8 91/8
600 4 9/16 515/16 61/8 61/8 6 5/8 7 7 81/4 81/4 9 7/8
Z 150 7 5/16 711/16 83/16 83/16 811/16 815/16 815/16 911/16 911/16 1011/16
300 67/8 8 1/4 87/16 87/16 815/16 9 5/16 9 5/16 103/16 103/16 117/16
600 67/8 8 1/4 87/16 87/16 815/16 9 5/16 9 5/16 10 9/16 10 9/16 123/16
Dimensional Data
Series CH/CXH Series F
5
C
G
D
F
APort
ZY
B
Notes:1"FP Cl. 150 Lay Length (B) and Flange Thickness varies with port option. See chart below left.
G
F
B (Main Valve Lay Length)
C
A Port
Notes:Working Pressure:1. Series CH 1"RP thru 2"RP-3000 CWP.2. Series CXH 1"RP, 11/2"RP, and 2"RP-5000 CWP.
ZY
MaleNPT
FemaleNPT
KF-AIV Threaded & Flanged Isolator Valves
-
Component Parts
Component Parts* And Materials of Construction Component Parts And Materials of ConstructionIndex Qty. Description Material1 1 Body A351-CF8M or A216-WCB2 1 Ball A351-CF8M3 1 Stem 316 Stainless Steel4 1 Adapter 316 SS or A283 CS5 2 Seat RTFE6 1 Stem Seal RTFE7 1 set Stem Packing TFE8 1 Gland 316 SS or 1045 CS9 1 Handle 304 SS or A283 CS10 1 Spring Washer 304 SS or CS11 1 Lock Nut 304 SS or A283 CS12 1 Body A351-CF8M or A216-WCB13 1 Spacer A351-CF8M or A216-WCB14 1 Ball 316 SS15 1 Stem 316 SS16 2 Seat RTFE17 1 Stem Seal RTFE18 1 Thrust Washer Grafoil19 1 Gland 304 SS20 2 Bell Washer WI-8 CS (SK5)21 2 Nut 304 SS or A283 CS22 1 Handle 304 SS or A283 CS
Index Qty. Description Material1 1 Body A216-WCB or A351-CF8M2 2 Adapter 1018 SS, 316 SS3* 1 Stem 316 SS4* 1 Ball 316 SS5* 2 Adapter Gasket Virgin PTFE7* 2 Seat Delrin, TFE or HT48** 2 Seat Seal Buna N, Viton, Aflas
10* 1 Packing TFE11* 1 Thrust Bearing Coated 316 SS12 1 Handle Assembly CS or 316 SS13 1 Packing Nut 316 SS14 1 Handle Nut 1215 CS, 304 SS15 1 Lockwasher 1215 CS, 304 SS
*Recommended spare parts for one year service.**Not required with Teflon seats.
Standard Series B/BH
6
*No replacement parts available.
3107
14
25
8 911
14
12
15
20
21
19
18KF Standard SeriesMain Valve
KF Standard SeriesSide Valve
16
13 22
17
6
MaleNPT
FemaleNPT
Figure 1:Enlarged detail of Side Valve forKF Series B/BH, CH/CXH andSeries F Isolator Ball Valves.
12151011
1/4" NPTOptional Port Plug
Note: The KF Series B 1/4"FP Side Valve utilizes the same components as shownabove except for the optional port plug.
22
4
1
87
5
13143
KF Series B/BHMain Valve
KF Series BSide Valve
MaleNPT
FemaleNPT
KF-AIV Threaded & Flanged Isolator Valves
-
Component Parts
Component Parts And Materials of Construction
Component Parts And Materials of Construction
Index Qty. Description Material1 1 Body ASTM A216 Gr. WCB CS or A351 Gr. CF8M SS2 1 Adapter ASTM A216 Gr. WCB CS or A351 Gr. CF8M SS3* 1 Stem Assembly Stressproof CS, Plated or 316 SS4* 1 Ball 1215 CS w/Nickel over Chrome Plating or 316 SS5* 1 Body Seal Buna N, Viton, Aflas
6* 1 Stem Bearing Nylon or PEEK (w/PEEK seats)7* 2 Seat Delrin or HT4 (PEEK)8* 1 Stop Steel9* 1 Stem Seal Buna N, Viton, Aflas
10* 1 Thrust Bearing Teflon or PEEK (w/PEEK seats)11* 1 Handle Assembly 1018 CS (1FP), A47 Malleable Iron (11/2 FP-2 RP)12 1 Stop Plate Steel13 1 Retainer Spring Steel39 1 Weather Seal Buna N
*Recommended spare parts for one year service.NOTE: Valves with SS Body and Adapter includes Xylan coated bolting.
*Recommended spare parts for one year service.
Series CH/CXH Series F
7
**Size/Capscrew & Bolt QuantitiesClass 1FP 11/2FP 2RP 2FP 21/2RP 3RP 3FP 4RP 4 FP 6RP150 4 4 4 4 4 4 6 6 8 8
300 6 6 6 6 6 6 6 6 8 8
600 6 6 6 6 6 6 8 8 8 8
900/1500 6
KF Series CH/CXHMain Valve
KF Series BSide Valve
Side Valve Note:See Enlarged Detail (Fig. 1) on page 6.
11
72 5
10
133 8
StopNot Shown
9
39
1
12
4
6
MaleNPT
FemaleNPT
KF Series F
Main Valve
KF Series B
Side Valve
Side Valve Note: See Enlarged Detail (Fig. 1) on page 6.
RF/RTJ RF/RTJ
11
1 2
3 813612
10
7
5
16
17
4
9
39
StopNot
Shown
Index Qty. Description Material
1 1 Body CS-ASTM A216 Gr. WCB/WCC, SS-ASTM A351Gr. CF8M, LCC-ASTM A352 Gr. LCC
2 1 Adapter CS-ASTM A216 Gr. WCB/WCC, SS-ASTM A351 Gr. CF8M, LCC-ASTM A352 Gr. LCC
3* 1 StemAssembly CS-ASTM A108 G12144 or G12150 (Non-NACE)w/Zinc Pltg, SS-ASTM A276 UNS S31600 (NACE)
CS-ASTM A108 G12144 or G12150, A576
4* 1 Ball UNS G10180-G10260 or A105 w/Chrome over Nickel Plating, SS-ASTM A276 UNS S31600, A511 Gr. MT316 or Gr MT316 or A351 Gr. CF8M
5* 1 Body Seal Buna N, Viton, Low Temp Buna N, Aflas
6* 1 Stem Bearing Nylon (Std.), HT4PEEK (High Temp)7* 2 Seat Nylon II Polyamide, Teflon, Reinforced, HT4 PEEK (High Temp)8* 1 Stop Screw Alloy Steel9* 1 Stem Seal Buna N, Viton, Low Temp Buna N, Aflas
10* 1 Thrust Bearing Teflon(Std.), HT4 PEEK (High Temp)11* 1 Handle Malleable Iron A47 Gr. 32514, Ductile Iron A536 Gr.65-45-1212 1 Stop Plate CS-ASTM A569 or A36 Plate, SS-300 Series Stainless Steel13 1 Retainer Spring Steel
ASTM A194 Gr. 2H (Std.), ASTM A194 Gr.2HM (NACE II),16 ** Hex Nut ASTM A320 Gr. L7 (Std. Low Temp),
ASTM A320 Gr. L7M (Low Temp NACE II)ASTM A193 Gr. B7 (Std.), ASTM A193 Gr. B7M (NACE II),
17 ** Stud ASTM A320 Gr. L7 (Std. Low Temp), ASTM A320 Gr. L7M (Low Temp NACE II)
39 1 Weather Seal Buna N
KF-AIV Threaded & Flanged Isolator Valves
-
Flow Coefficient(Cv) And Operating Torque
www.circorenergy.comKF-AIV-June-11-2up-HP 2011 CIRCOR Energy KF Valves is a CIRCOR Energy Brand Litho USA. KF reserves the right to change designs, materials or specifications without notice or without oblig-ation to furnish or install such changes on products previously or subsequently sold. American Isolator Valve Design Covered by U.S. Patents #4,840,057 and #4,852,387 Viton is a registered trade-mark of DuPont Dow Elastomers. Teflon is a registered trademark of DuPont. Aflas is a registered trademark of Asahi Glass.
Size (In.) 1RP 2RPFlow Coefficient (Cv) 30 110
Size (In.) 1 21500 CWP * *2000 CWP * *
*Consult Factory
Size (In.) 1RP 11/2RP 2RPFlow Coefficient (Cv) 185 308 140
Size (In.) 1RP 11/2RP 2RP3000 CWP 1000 1690 1690
Flow Coefficient (Cv)
Design Torque (In.-lbs.)
Flow Coefficient (Cv)
Design Torque (In.-lbs.)
Engineering Data
Standard
Series B/BH
Series CH/CXH
Series FFlow Coefficient (Cv)
Size (In.)ANSI Class 1FP 11/2FP 2RP 2FP 21/2RP 3RP 3FP 4RP 4 FP 6RP150 95 308 140 220 500 220 1390 630 2550 925
300 95 308 140 220 420 210 1050 600 2000 910
600 93 308 140 220 365 185 1000 570
900/1500 90
Size (In.)Pressure 1FP 11/2FP 2RP 2FP 21/2RP 3RP 3FP 4RP 4 FP 6RP275 psi 300 540 540 600 600 600 1320 1320 2160 2160
720 psi 360 720 720 960 960 960 2160 2160 3600 3600
1440 psi 600 900 900 1200 1200 1200 2700 2700 2160 psi 780
3600 psi 1200
Design Torque (In.-lbs.) Design Torque (In.-lbs.)
Our Quality CommitmentWere dedicated to providing our customers with technically supe-rior products that are designed, manufactured, and tested to theexacting standards of various qualifying authorities. Other addi-tional non-destructive or destructive examinations may be per-formed to customer requirements or specifications. Contact yourKF Representative for additional information and clarification.
Series/Size (In.) 1RP 2RP(B )Teflon 2250 CWP 170 320(B) Delrin & HT4 (3000 CWP) 200 850(BH) Delrin & HT4 (5000 CWP) 260
Canada
9430-39th Avenue, Edmonton
Alberta, Canada T6E 5T9
Phone: (780) 463-8633
Fax: (780) 461-1588
E-mail: [email protected]
www.circorenergy.com
World Headquarters
1500 S.E. 89th Street
Oklahoma City, OK 73149 USA
Phone: (405) 631-1533
Fax: (405) 631-5034
E-mail: [email protected]
www.circorenergy.com
Flow Coefficient (Cv)Size (In.) 1 2Flow Coefficient (Cv) 30 110