Keyseat CuttersHarvey Tool’s Specialty Profiles

Products, Features, & Benefits

Keyseat Cutters - Square NewSizes

Stocked in sizes down to 1/16˝ diameter!

• Both sides of cutter are dished for clearance• Offered in 20 cutter diameters and 3 types

for slotting

Keyseat Cutters - Square (Con’t) StockedIn Multiple Radial

Depths of Cut!

Harvey Tool’s Square Keyseat Cutters are offered in 3 different types for slotting:

• Standard Slotting (Type I)• Deep Slotting (Type II)• Max Slotting (Type III)

For larger diameters and greater radial depths of cut see Large Diameter Keyseat Cutters on Slide 5!

Keyseat Cutters - Square Non-Ferrous Materials

Optimized for aluminum and aluminum alloys with excellentperformance in copper, brass, and bronze alloys

• Large flute opening and sharper cutting edge• Offered in 2 types for slotting with TiB2 coating to

minimize galling• Both sides of cutter are dished for clearance

NewSizes

Keyseat CuttersSquare - Large Diameter

NewSizes

Both sides of the cutter are dished for clearance

• Solid carbide head brazed onto a steel shank• Weldon flat• Offered in 3 types for slotting

Retaining Ring Keyseat Cutters

Designed for Milling Retaining / Snap Ring Grooves

• Designed to mill proper slot widths for common retaining ring sizes• Cutter diameter, neck length, radial, and axial depths of cut optimized for

internal retaining ring grooves per ANSI standards• Both sides of cutter are dished for clearance

NewSizes

Looking for the right internal bore & groove dimensions for your application?

Select the tool for your next job with Harvey Tool’s Retaining Keyseat Cutter Selection Chart!

You can find this chart and even more useful machining resources at: http://www.harveytool.com/technical

Retaining Ring Keyseat Cutter Selection Chart

Keyseat CuttersCorner Radius

NewSizes

Corner radius for improved strength

• Both sides of cutter are dished for clearance• Offered in 2 types for slotting

Keyseat CuttersCorner Radius - Large Diameter New

Solid carbide head brazed onto a steel shank

• Both sides of cutter are dished for clearance• Corner radius for improved strength• Weldon flat

Keyseat Cutters - Staggered Tooth - Corner Radius

NewSizes

Staggered tooth design for optimal performance with alternating RH / LH shear flutes, RH cut

• Design improves shearing action, minimizes chip dragging and recutting, decreases vibration, and improves side wall finish

• Relieved to allow cutting on both sides of head• Tool can be offset to increase width of groove• Corner radius for improved strength

Staggered tooth design for optimal performance with alternating RH / LH shear flutes, RH cut

• Design improves shearing action, minimizes chip dragging and recutting, decreases vibration, and improves side wall finish

• Relieved to allow cutting on both sides of head• Tool can be offset to increase width of groove• Corner radius for improved strength

Keyseat Cutters - Staggered Tooth - Square

NewSizes

Keyseat Cutters – Full Radius

Ground form relieved (can be reground without losing radius)

• 6 flutes• Both sides of cutter are dished for clearance• Offered is 2 types for slotting

Keyseat Cutters – Full RadiusLarge Diameter

Ground form relieved (can be reground without losing radius)

• 6 flutes• Both sides of cutter are dished for clearance• Solid carbide head with steel shank• Offered in 2 types for slotting