Tools Required

Phillips Screwdriver

Disassembly Instructions

REV-00

Keyboard Tray

Some components may not be recyclable in your area.

Tools Required

Phillips Screwdriver

For Clip Mouse Platform (figure 1)

Step 1Remove 3 screws from keyboard tray using a Phillips Screw Driver.

Step 2Remove screw under mouse platform sticker.

Step 3Unclip platform edge strip.

For Swivel Mouse Platform (figure 2)

Step 1Remove screw from located at bottom of mouse platform using a Phillips Screw Driver.

Step 2Unclip platform edge strip.

1. Mouse Platform Removal

1

1

2

2

3

(figure 1)

(figure 2)

Steel

Phenolic

Phenolic

Nylon

Steel

>PA<

Nylon>PA<

Disassembly Instructions

REV-00

Keyboard Tray

Some components may not be recyclable in your area.

Tools Required

Phillips Screwdriver

Step 1Remove screws from keyboard tray using a Phillips Screw Driver.

Step 2Discard parts for proper recycling.

2. Keyboard Tray Removal Phenolic

Gel or Foam

Disassembly Instructions

REV-00

Keyboard Tray

Some components may not be recyclable in your area.

Tools Required

Phillips Screwdriver

Step 1 (figure 1)Remove front screws from bracket using a Phillips Screw Driver.

Step 2 (figure 1)Once bracket is removed, slide tray arm forward to remove.

Step 3 (figure 2) Remove mounting screws using a Phillips Screw Diver.

3. Mechanism Removal

1

2

Steel

Steel

(figure 1)

(figure 2)

Disassembly Instructions

REV-00

Keyboard Tray

Some components may not be recyclable in your area.