KENNY DOUBLE BEDFRAME - Tesco.com · 1 KENNY DOUBLE BEDFRAME Before You Start • Important: Retain...

28
1 KENNY DOUBLE BEDFRAME Before You Start Important: Retain these instructions for future reference. When you are ready to start, make sure that you have the right tools, plenty of space and a clean, dry area for assembly. Unwrap all packaging materials and place the components on top of the carton box or on a clean floor to prevent it from scratching. Check the pack and make sure you have all the parts listed. Tools not included. Do not use power tools to construct this product. Due to the size of this product we recommend that it is assembled in the room intended for use. Ensure that this product is fully assembled as illustrated before use. Warnings This product is intended for a maximum weight of 100 kg. Do not exceed this weight. It is recommended that 2 people are required to assemble this product. Do not stand on the product. This product should only be used on firm, level ground. Make sure the legs remain in contact with the ground. Keep small parts out of reach of children. Check all screws or bolts are tightened and inspect regularly. Do not tighten screws until fully assembled. Do not overtighten screws or bolts. Do not use this product if parts are missing, damaged or worn. Do not allow children to jump on the bed as this could cause damage to the frame. Because of the size of this unit, we recommended that it is built in the room intend for use. Care Instructions To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or detergents as they can bleach or damage the product. Never use scourers, abrasives or chemical cleaners.

Transcript of KENNY DOUBLE BEDFRAME - Tesco.com · 1 KENNY DOUBLE BEDFRAME Before You Start • Important: Retain...

1

KENNY DOUBLE BEDFRAME

Before You Start

• Important: Retain these instructions for future reference. • When you are ready to start, make sure that you have the right tools, plenty of space and a clean, dry area

for assembly. • Unwrap all packaging materials and place the components on top of the carton box or on a clean floor to

prevent it from scratching. • Check the pack and make sure you have all the parts listed. • Tools not included. • Do not use power tools to construct this product. • Due to the size of this product we recommend that it is assembled in the room intended for use. • Ensure that this product is fully assembled as illustrated before use.

Warnings • This product is intended for a maximum weight of 100 kg. Do not exceed this weight. • It is recommended that 2 people are required to assemble this product. • Do not stand on the product. • This product should only be used on firm, level ground. • Make sure the legs remain in contact with the ground. • Keep small parts out of reach of children. • Check all screws or bolts are tightened and inspect regularly. • Do not tighten screws until fully assembled. • Do not overtighten screws or bolts. • Do not use this product if parts are missing, damaged or worn. • Do not allow children to jump on the bed as this could cause damage to the frame. • Because of the size of this unit, we recommended that it is built in the room intend for use.

Care Instructions • To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or detergents as

they can bleach or damage the product. • Never use scourers, abrasives or chemical cleaners.

2

Parts Ax2

Bx2

Cx4

Dx4

Ex2

Fx1

Gx2

Hx12

Ix2

Jx4

Kx4

ax4 (M6x60mm)

bx8 (1/4x70mm)

cx48 (M6x20mm)

dx4 (1/4x30mm)

ex4 (M6)

fx8 (M6)

gx1

hx1

3

Assembly Instructions

1 bx8 fx8

g x 1

h x 1

4

2 ax4 cx12 ex4 g x 1

5

3 cx12 dx4 g x 1

4 cx24 g x 1

6

Produced in China for TESCO Stores Ltd.© Tesco 2011.

Product size:

Catalogue ref: 207-1523

Kenny Double Bedframe Assembly instructions

ww w.tesco.com

W1980xD1460xH805mm

2

Before you start

Produced in China for TESCO Stores Ltd.© Tesco 2011.

www.tesco.com

Warnings

Important: Retain these instructions for future reference.

Unwrap all packaging materials and place the components on topof the carton box or on a clean floor to prevent it from scratching.

This product should only be used on firm, level ground.

Keep small parts out of reach of children.

This product is intended for a maximum weight of 100 kg. Do notexceed this weight.

Do’s

When you are ready to start, make sure that you have the right tools, plenty of space and a clean, dry area for assembly.

Check the pack and make sure you have all the parts listed.

Tools not included.

Due to the size of this product we recommend that it is assembled in the room intended for use.

Ensure that this product is fully assembled as illustrated before use.Make sure the legs remain in contact with the ground.

Check all screws or bolts are tightened and inspect regularly.

To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or detergents as they can bleach or damage the product.

Due to the size of this product we recommend that it isassembled in the room intended for use.

Dont’s

Do not use power tools to construct this product.

Do not tighten screws until fully assembled.

Do not overtighten screws or bolts.

Do not stand on the product.

Do not use this product if parts are missing, damaged or worn.

Do not allow children to jump on the bed as this could cause damage to the frame.

Never use scourers, abrasives or chemical cleaners.

Number of people required to assemble

Two people to assemble the product and two people to lift theproduct into position.

Time to assemble

1 hour

Tradesman’s tips

“Hi, look out for me throughout this manual. Wherever you see my picture I will have a handy tip to help you with the assembly of your product”.

My first tip is: “Before you start get a cup of tea, sit down and read through these instructions carefully”.

And for good measure my second tip is that you will need the following tools to assemble this product, so gather them to hand before you start

Tools required

5 Hex keysupplied

supplied

Kenny Double Bedframe Assembly instructions

3

Our promise

We are happy to refund or replace any Tesco product which falls below the high standard you expect. Just ask any member of staff. This will not effect your statutory rights.

Missing parts

If you are missing any fixtures and fittings for your productplease contact our customer service team on 08450 264 549 and they will be happy to arrange for a replacement to be sent to you free of charge.

Assembly service

If you decide that you do not wish to assemble this product yourself,please contact our trained assembly team on 0845 026 4549.

.uoy rof meti siht gnilbmessa rof etouq a edivorp ot elba eb lliw ohw

Tesco Self Assembly Furniture Telephone Service

Tesco has enlisted the help of FIRA Service Technicians, the UK’s experts on furniture, to provide a helpline for those hitting snags when putting their flat pack item together. The knowledgeable and patient staff at FIRA can help you and are available to take your call 08.00hrs to 20.00hrs Monday to Friday on: 0845 520 5516*

* Calls are charged at local rates.

Home service technicians

If you have a fault with your product please contact our customer service team on 08450 264 549. If you have had the product for 28 days or less you may be offered a replacement, refund or for a fully trained home service technician to visit your home to assess the fault and repair the product where possible. If you have had the product for more than 28 days we will send an independent home service technician to review and repair the product where possible and recommend further action.

The Furniture Ombudsman“Inspiring Consumer Confidence”

Further help

To view our full furniture range please visit www.direct.tesco.com.

Produced in China for TESCO Stores Ltd.© Tesco 2011.

www.tesco.com

"Inspiring Consumer Confidence"

As part of our commitment to maintaining high standards and responsible furniture retailing, Tesco is a Full Member of The Furniture Ombudsman. This means that if you’re not entirely satisfied with your purchase – and we haven’t managed to resolve the problem – you can contact them to look into it for you. By signing up to The Furniture Ombudsman Code of Practice we promise to follow their decisions – ensuring that you get a fair deal. This means that you can buy in complete confidence when selecting your furniture from Tesco.

You should first discuss your complaint with our Customer Service team on 08450 264 549 so that we can try to solve any issues. After that, if you’re still not happy you can contact The Furniture Ombudsman at www.thefurnitureombudsman.org

You can write to us at

Tesco Stores Ltd.New Tesco House, Delamare Road,Cheshunt,Herts,EN8 9SL,UK

FREEPHONE 0800 50 55 55

Kenny Double Bedframe Assembly instructions

4

Getting to know your product

Produced in China for TESCO Stores Ltd.© Tesco 2011.

www.tesco.comTo view our full furniture range please visit www.direct.tesco.com.

Kenny Double Bedframe Assembly instructions

Produced in China for TESCO Stores Ltd.© Tesco 2011.

www.tesco.com

5

10

0mm

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

170

180

190

200

210

220

230

240

250

260

270

280

Components supplied (not actual size)

Φ38x800A 2

Φ38x390B 2

20x40x1342C 4

110x52x952D 2

76x25x1295E 1

76x25x297F 2

Φ16x1345H 16

115x55x25G 2

110x52x952I2

Dimensions(mm) Visual QtyRef

Kenny Double Bedframe Assembly instructions

J

K

L

Φ25x310 4

Φ16x1345 4

30x30x870 2

Produced in China for TESCO Stores Ltd.© Tesco 2011.

www.tesco.com

6

10

0mm

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

170

180

190

200

210

220

230

240

250

260

270

280

Fixtures and fittings supplied(actual size)

Ref Dimensions(mm)

M6x70a

M6x60b

M6x20c

M6

M6

M6

M6

d

e

f

h

g

i

Visual Qty

8

4

48

4

8

8

4

16

1

Kenny Double Bedframe Assembly instructions

M6x30

1j

7

1

Produced in China for TESCO Stores Ltd.© Tesco 2011.

www.tesco.com

Supplied

ax3 M6x70 ex3 M6 gx3 M6

2

3

4

ax3 M6x70 ex3 M6 gx3 M6

ax1 M6x70 ex1 M6 gx1 M6

ax1 M6x70 ex1 M6 gx1 M6

x3

x3Supplied

Supplied

Supplied

Kenny Double Bedframe Assembly instructions

8

5

Produced in China for TESCO Stores Ltd.© Tesco 2011.

www.tesco.com

6

3

7

8

bx4 M6x60 dx4 M6 x2

x2

cx2 M6x20 fx2 M6 gx2 M6

cx4 M6x20 fx4 M6 gx4 M6

cx2 M6x20 fx2 M6 gx2 M6

Supplied Supplied

Supplied

Supplied

Supplied

Kenny Double Bedframe Assembly instructions

9

9

Produced in China for TESCO Stores Ltd.© Tesco 2011.

www.tesco.com

10

x2

x2

cx4 M6x20

cx4 M6x20

cx8 M6x20

11

Supplied

Supplied

Supplied

Kenny Double Bedframe Assembly instructions

x 4

K

9

12

Produced in China for TESCO Stores Ltd.© Tesco 2011.

www.tesco.com

x4h x4 M6x30

cx24 M6x20

13Supplied

Supplied

Kenny Double Bedframe Assembly instructions

x 12

L

K

J

H

1

www.tesco.comProduced in Malaysia for TESCO Stores Ltd.c Tesco 2014

Kenny Double Bed FrameAssembly instructions

Catalogue ref : 207 - 1523

Product size:H 810 x W 1385 x L 1981 mm

2

www.tesco.com

Before you start

Dont's

Do not overtighten screws or bolts.

Do not use scourers, abrasives (including washing powders), bleachor solvent based cleaners as they can bleach or damage theproduct.

Number of people required to assemble

Two people to assemble the product and lift it into position.

Time to assemble

Tradesman's tips

Hi, Look out for me throughout this manual. Wherever you seemy picture I will have a handy tip to help you with the assemblyof your product.

My first tip is : Before you start get a cup of tea, sit down andread through these instructions carefully.

^^^^And for good measure my second tip is that you will need thefollowing tools to assemble this product, so gather them to handbefore you start.^^^^

Tools required

IMPORTANT ! READ CAREFULLYAND RETAIN THESE INSTRUCTIONSFOR FUTURE REFERENCE

When you are ready to start, make sure that you have plenty ofspace and a clean, dry area for assembly.

Due to the size of this product we recommend that it is assembled inthe room intended for use.

Unwrap all packaging materials and place the components on topof the carton box or on a clean floor to prevent it from scratching.

Check the pack and make sure you have all the parts listed.

Do not use power tools to construct this product.

Warnings

Failure to follow the warning could result in serious injury.

Ensure that this product is fully assembled as illustrated and that allfittings are tightened properly before use.

Do not use this product if parts are missing, damaged or worn.

The product is intended for a maximum weight of 180 kgs. Do notexceed this weight.

The bed is intended for maximum weight of 80 kgs per person.Do not exceed this weight.

This product has been designed for use by a maximum of two peopleat a time.

Do not stand on the product.

This product should only be used on firm, level ground.

Make sure the Legs remain in contact with the ground.

During assembly keep small parts out of reach of children.

Check all screws or bolts are tightened and inspect regularly.

Do not allow children to jump on the bed as this could cause damageto the frame.

Do's

To Clean wipe with a sponge and warm soapy water.

Produced in Malaysia for TESCO Stores Ltd.c Tesco 2014

Kenny Double Bed FrameAssembly instructions

Further help

As part of our commitment to maintaining high standardsand responsible furniture retailing, Tesco is a Full Memberof The Furniture Ombudsman. This means that if you're notentirely satisfied with your purchase - and we haven't managedto resolve the problem - you can contact them to look into itfor you . By signing up to The Furniture Ombudsman Code ofPractice we promise to follow their decisions - ensuring that youget a fair deal . This means that you can buy in completeconfidence when selecting your furniture from Tesco.

You should first discuss your complaint with our Customer Serviceteam on 08450 264 549 * so that we can try to solve any issues.After that, if you're still not happy you can contact The FurnitureOmbudsman at www.thefurnitureombudsman.org

You can write to us at

Tesco Stores LtdNew Tesco HouseDelamare RoadCheshuntHertsUKEN8 9SL

Our promise

We are Happy to refund or replace any Tesco product which fallsbelow the standard you expect. Just ask any member of staff.This will not affect your statutory rights.

Missing parts

If you are missing any fixtures or fittings for your productplease contact 08450 264 549* and we will be happy tosent you a replacement part free of charge.

Assembly service

If you decide that you do not wish to assemble this product yourself ,please contact our customer service team on 08450 264 549 *who will be able to help arrange a quote for a trained assembler tocome and assemble the item for you.

Tesco furniture assembly helpline

Tesco has enlisted the help of FIRA Service Technicians, the UK'sexperts on furniture, to provide a helpline for those hitting snagswhen putting their flat pack item together.The knowledgeable and patient staff at FIRA can help you and areavailable to take your call 08.00hrs to 20.00hrs Monday to Fridayon 08455 205 516*

Faulty product

If you have a fault with your product please contact our customerservice team on 08450 264 549 * . If you have had the product for28 days or less you may be offered a replacement , refund or for afully trained home service technician to visit your home to access thefault and repair the product where possible.

If you have had the product for more than 28 days we may sent anindependent home service technician to review and repair productwhere possible and recommend further action.

* Calls are charged at local rates.

The Furniture Ombudsman

www.tesco.com

3Produced in Malaysia for TESCO Stores Ltd.c Tesco 2014

To view our full furniture range please visit direct.tesco.com.

Kenny Double Bed FrameAssembly instructions

4

www.tesco.com

Getting to know your product

4

1

6

78

Produced in Malaysia for TESCO Stores Ltd.

45

9

3

13

3

3

2

2

c Tesco 2014

Kenny Double Bed FrameAssembly instructions

5

www.tesco.com

Components supplied (not actual size)

Ref

1

4

5

6

7

2

Produced in Malaysia for TESCO Stores Ltd.

QtyDimensions (mm) Visual

8

9

2

2

1

14

1

2

25 x 50 x 1905 mm

25 x 25 x 1850 mm

25 x 270 mm

16 x 1368mm

16 x 1342mm

3 x 25 x 160 mm

38 x 810 mm

2 2 38 x 395 mm

3 4 19 x 38 x 1312 mm

c Tesco 2014

Kenny Double Bed FrameAssembly instructions

6

www.tesco.com

Fixtures and fittings supplied (actual size)

Fixtures and fittings supplied (not actual size)

Ref QtyDimensions (mm) Visual

Ref QtyVisual

8

A

4

M8 x 20mmB

4

M6 x 20mm

G

1+4

H

I

1M6

1

M6

J

2

K 4

4

25 x 25mm

M4

M5

Produced in Malaysia for TESCO Stores Ltd.

Ref Qty

C

M6 x 40mm

Visual

M6

L

4

E2

0

10

mm

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

170

180

190

200

F

D

M8 x 70mm 8

M

4∅38

c Tesco 2014

Kenny Double Bed FrameAssembly instructions

www.tesco.com

7

1

Produced in Malaysia for TESCO Stores Ltd.

2

1

JJ x 2 ∅38mm

2

M8 x 70mmA x 6

J

3

J x 2 ∅38mm

X 2

X 2

1

1

3

3

3

G

A

A

A

A

A

A

G

A

1

3

c Tesco 2014

Kenny Double Bed FrameAssembly instructions

www.tesco.com

8

4

Produced in Malaysia for TESCO Stores Ltd.

5

M8 x 70mmA x 2

3

2

2

A

G

A

G

A

2

3

C

C

4

7

H

M6 x 20mmC x 2

4

7

C

4

M6 x 20mmC x 2

C

H

6

c Tesco 2014

Kenny Double Bed FrameAssembly instructions

www.tesco.com

8

7

9

M8 x 20mmB x 4

B G2

M8 x 20mmB x 4

B

G

Produced in Malaysia for TESCO Stores Ltd.

1

31

B

B

B

2

3

2B

c Tesco 2014

Kenny Double Bed FrameAssembly instructions

www.tesco.com

9

Produced in Malaysia for TESCO Stores Ltd.10

6

Please use fitting F and push it into the hole on the side of the poles.This will release the clip and allow you to slot into the bedframe .Once in frame remove fitting F and repeat process for the other poles shown.

6

F x 1(+4)

F

6

X 4

25 x 25mmI x 2

I

I

5

10

c Tesco 2014

Kenny Double Bed FrameAssembly instructions

4th hole

3rd hole

www.tesco.com

11

Produced in Malaysia for TESCO Stores Ltd.11

M6 x 40mmD x 4 M6L x 4 M6K x 4

E x 2

(Adjustable Screw)

M6M x 4

12

F x 1(+4)

Please use fitting F and push it into the hole on the side of the poles.This will release the clip and allow you to slot into the bedframe .Once in frame remove fitting F and repeat process for the other poles shown.

X 10

F

6

D H

LL

MM

E

K K

8

56

9

6

6

c Tesco 2014

Kenny Double Bed FrameAssembly instructions

www.tesco.com

13

14

Produced in Malaysia for TESCO Stores Ltd.12

Twist leftand right

PICTURE A

PICTURE B

If the clip does not release or is out of place, either adjust the clip to the correct position or twist the end cap until the clip comes free

(PICTURE A)(PICTURE B)

c Tesco 2014

Kenny Double Bed FrameAssembly instructions