Kelch RoWi2 A4 V02 01-2015 englisch 03 Freigabe SB...
Transcript of Kelch RoWi2 A4 V02 01-2015 englisch 03 Freigabe SB...
KELCH GmbH · Werkstrasse 30 · D-71384 Weinstadt · Phone: +49 (0) 71 51 / 2 05 22 - 0 · Fax: +49 (0) 71 51 / 2 05 22 - 11 · [email protected] · www.kelch.deAll information without guarantee. Changes in technology and design reserved.
RoWi 2Table-top taper cleaner for tool holders. A neat job.
• Modular cleaning device for cleaningvarious tool holder tapers
• Robust housing with integrated time switch, to avoid continuous operation of the device
• Ergonomic design for safe and easy operation
• Resistant to rust and cooling lubricants
• Fast, gentle and reliable cleaning of extremely dirty or resinified tool holders
Clean tool holders ensure precision at the cut surface:• Reduce waste
• Increase the tool life
• Protect the machine spindle
• Ensures high precision and process reliability
• Maintains the run-out accuracy of the tooling system
Item no.: 260.501Motor: Alternating current motor with approx. 65 rpmnPower connection: 1 ~ 100 - 240V, 45 - 65HzPower output: max. 0,12 kWTaper sizes: All standard taper sizes in HSK, PSK and SK are available.
Drive unit Cleaning moduleItem no.: Taper size*1
260.502 SK 40260.504 SK 50260.513 HSK 63260.515 HSK 100260.523 PSK 63
Advantages:
Exchangeable cleaning module
Time switch Formed hand grip for safe handling
*1 More taper sizes available on request.
Item no.: 1066786
KELCH GmbH · Werkstrasse 30 · D-71384 Weinstadt · Phone: +49 (0) 71 51 / 2 05 22 - 0 · Fax: +49 (0) 71 51 / 2 05 22 - 11 · [email protected] · www.kelch.deAll information without guarantee. Changes in technology and design reserved.
CLEANERSWipers for spindles and tools.
Spindle and tool cleaners
Item no.: Pump spray with contents
260.430 200 ml
Reflu cleaning fluidCleaning fluid for Rowi.For more thorough cleaning of taper shanks.
Item no.: Taper
068.199 Morsekegel MK 1068.100 Morsekegel MK 2068.101 Morsekegel MK 3068.102 Morsekegel MK 4068.103 Morsekegel MK 5
068.201 Steilkegel SK 30068.202 Steilkegel SK 40068.205 Steilkegel SK 45068.203 Steilkegel SK 50
068.721 HSK A/C HSK 32068.722 HSK A/C HSK 40068.723 HSK A/C HSK 50068.724 HSK A/C HSK 63068.725 HSK A/C HSK 80068.726 HSK A/C HSK 100
Item no.: Taper
068.602 HSK A-F HSK 40068.603 HSK A-F HSK 50068.604 HSK A-F HSK 63068.605 HSK A-F HSK 80068.606 HSK A-F HSK 100
Wipers for spindlesTo clean the inner taper of machine spindles.
Wipers for toolsTo clean the outer taper and contact surface of HSK tools.
Description / Advantages:• Body made from polystyrene, conical surfaces with
grooved roughened fleece strips• For HSK and SK non-slip polygon handle for easier handling • High cleaning effect due to highly absorbent,
non-abrasive fleece and wide spacing• Resistant to oils and emulsions• Long life
Kel
ch G
mbH
, © C
opyr
ight
201
5 -
ww
w.k
elch
.de
- R
oWi2
V02
/ 01
-201
5