Keeping the Industry Connectedmidwesthose.com/Content/pdfs/midwesthoselayflatbrochure.pdfKeeping the...
Transcript of Keeping the Industry Connectedmidwesthose.com/Content/pdfs/midwesthoselayflatbrochure.pdfKeeping the...
Midwest Hose & Specialty, Inc.Keeping the Industry Connected
Layfl at Brochure
BUY AMERICAN. BUY DIRECT.
MenderLAYGMELAYGME
Grooved TeeLAYGTEELAYGTEE
Grooved Y, Parallel YLateral Y
LAYG•Y
Layflat HoseRestrictor
LAYHRT
Stops flow to repair hose w/o losing waterosing water
Flow MetersLAYFMT
Storz Bars 7/8” ID
For opening/closingStorz Fitting
LAYSTZHND
Storz Fitting
LAYSTZHNDQuick ConnectsCAMLOCKS
Quick ConnectsBAUERS STYLEQuick Connects
BAUERS STYLE
Grooved 45°LAYG45
Pigging ProductsLAYPIG
• Cast Aluminum A356-T6• Machined with knurled texture to thoroughlyengage hose between stem and clamp• Anodized for abrasion/corrosion
Grooved StemField Attachable
LAYGST
• Cast Aluminum A356-T6• Machined with knurled texture to thoroughly engage hose between stem and clamp• Anodized for abrasion/corrosion• Safety lock avoids accidental uncoupling• Gasket in stem for leak-tight seal
Storz StemField Attachable
LAYST2SET
• Gasket in stem for leak-tight seal
• Grooved or Storz Stem• Cast Aluminum A356-T6• Anodized for abrasion/corrosion• SS bolts for longevity• Lightweight, rounded
ClampField Attachable
LAYGHC
• Assembled onto pipe without disassemblying the bolts, nuts, and housing• Speedier installation than normal groovedclamps• Push onto grooved fitting end, join by asecond grooved fitting end, then tightenbolts and nuts
Speedier Installation
sh onto grooved fitting end, join by aond grooved fitting end, then tightents and nuts
LAYGCR
MADEIN THEUSA
TEST DOCUMENTATION
81012
0.1650.1610.157
0.1650.196
inch inchID
Wall Thickness
0.7%1.0%1.0%
0.5%0.5%
at WP
14191063667
18942462
lbs./660 ft. feetElongation Weight
ReelLength
200
25046
psiMax WP
150
660
W
TPU Layfl at HoseDesigned for produced water/fresh water transfer. Typically used for hydraulic fracture water transfer, to replace damaged hydrant lines, or to replace a broken water main. Manufactured with NSF standard 61 approved materials for use with potable water. Custom hose color and branding available on big volume orders.
Lining PropertiesUltimate Tensile Strength no less than 1200 psiUltimate Elongation when tested to UL-19guidelines a small dumbbell sample of lining elongates a minimum of 400%
ResistanceAbrasion 25mm3 on DIN 53516/ISO4649 testing, up to 5 times more resistant and 50% more puncture resistant than Nitrile/PVCCold Remains fl exible in as low as -40° F conditionsOzone No cracking in lining or cover when tested to ASTM D518 Procedure B (100 pphm/118°F/70 hours)Chemical Resistant to most chemicals and petroleum products
All assemblies are proof tested at working pressure in the USA. We take a great deal of pride in promising that only the highest quality product leaves through our doors.
Warfl ex Through the WeaveA more economical alternative to our polyurethane layfl at hose. Warfl ex is reinforced with high–tenacity polyester yarn and coated through the weave with a 70% nitrile rubber / 30% PVC blend for good chemical resistance for produced water. Less abrasion resistance and puncture resistance. Custom hose color and branding available on big volume orders.
-40° F to 180° F
ORDERSPEC SHEET
MWHWARFLEX 150-128 200 PSI W.P.
ORDERSPEC SHEET
MWHPOLYTW200-160 200 PSI W.P.
Woven Polyester ReinforcementExtruded Tube and Cover
Part Number MWHPOLYTW200-XXX
Construction Polyurethane Extruded Through the Weave and a Circular Polyester Woven Reinforcement. No use of glues or adhesives.Safety Factor Minimum 2.25 to 1
Lining PropertiesUltimate Tensile Strength no less than 1200 psiUltimate Elongation when tested to UL-19guidelines a small dumbbell sample of lining elongates a minimum of 400%
ResistanceOzone No cracking in lining or cover when tested to ASTM D518 Procedure B (100 pphm/118°F/70 hours)Chemical Resistant to most chemicals and petroleum products
Construction Nitrile/PVC Blend Extruded Through the Weave and a Circular Polyester Woven Reinforcement. No use of glues or adhesives.Safety Factor Minimum 2.25 to 1
Part Number MWHWARFLEX•••-XXX
-4° F to 176° F
TEST DOCUMENTATION
468
1012
0.0930.0850.079
0.1120.126
150175200
150150
Available upon request
inch inchID
Wall Thickness
0.640.450.27
1.111.88
lbs./660 ft. feetWeight
ReelLength
23
psiMax WP
660, 100, and 50 foot
lengths
W
DallasLongviewFt. Worth
Alice
Dilley
HoustonSan Antonio
Odessa
Hobbs
Grand Junction
Rock Springs Casper
VernalGreeley
Williston
Dickinson
Towanda
Pittsburgh
Lafayette
El Reno
Woodward
Oklahoma
Bakersfield
City
Roosevelt
Corry
Manufacturing Location
Store Location Pasadena
Midwest Hose & Specialty, Inc.
Corry, PA Manufacturing Plant
Oklahoma City, OK Manufacturing Plant & Store