7/21/2019 Kathrein-80010656 (6 gab)

http://slidepdf.com/reader/full/kathrein-80010656-6-gab 1/234 For more information about additional mounting accessories please refer to page 189

XXPol Panel 1695–2690/1695–2690 35°(–30°)/35°(+30°) 19.5/19.5dBi 2°–10°/2°–10°T

Type No. 80010656

Left side, high band Y1, connector 1–21695–2690

Frequency Range (MHz) 1695 – 1880 1850 – 1990 1920 – 2170 2300 – 2400 2500 – 2690

Gain at mid Tilt (dBi) 18.7 19.2 19.5 19.7 19.5

Gain over all Tilts (dBi) 18.6 ± 0.5 19.1 ± 0.3 19.4 ± 0.4 19.6 ± 0.5 19.4 ± 1.1

Horizontal Pattern:

Azimuth Beamwidth (°) 41 ± 1.8 38 ± 1.7 37 ± 1.2 36 ± 2.0 33 ± 1.5

Front-to-Back Ratio,Total Power, ± 30° (dB)

> 22 > 23 > 23 > 24 > 23

Azimuth Beam Squint (°) –0.5 ± 1.4 –0.5 ± 0.5 –1 ± 0.9 –1.5 ± 2.3 –0.5 ± 2.3

Vertical Pattern:

Elevation Beamwidth (°) 7.8 ± 0.5 7.4 ± 0.2 7.1 ± 0.3 6.4 ± 0.4 5.8 ± 0.4

Electrical Downtiltcontinuously adjustable (°)

2 – 10

Tilt Accuracy (°) < 0.5 < 0.3 < 0.2 < 0.3 < 0.3First Upper Side LobeSuppression (dB)

> 19 > 21 > 20 > 19 > 16

Cross Polar Isolation > 28 dB

Port to Port Isolation > 28 dB

Maximum Effective Powerper Port

200 W (at 50 °C ambient temperature)

Values based on ngmn-P-BASTA requirements.

Right side, high band Y2, connector 3 –4

1695–2690

Frequency Range (MHz) 1695 – 1880 1850 – 1990 1920 – 2170 2300 – 2400 2500 – 2690

Gain at mid Tilt (dBi) 18.6 19.1 19.4 19.7 19.6

Gain over all Tilts (dBi) 18.5 ± 0.5 19.0 ± 0.5 19.3 ± 0.5 19.6 ± 0.6 19.5 ± 1.0

Horizontal Pattern:

Azimuth Beamwidth (°) 41 ± 1.9 38 ± 2.3 37 ± 1.3 35 ± 1.0 33 ± 1.1

Front-to-Back Ratio,Total Power, ± 30° (dB)

> 20 > 20 > 22 > 25 > 23

Azimuth Beam Squint (°) –2.5 ± 1.4 –2 ± 0.8 –2 ± 0.7 –2.5 ± 2.1 –1.5 ± 2.4

Vertical Pattern:

Elevation Beamwidth (°) 7.8 ± 0.6 7.4 ± 0.3 7.1 ± 0.4 6.4 ± 0.4 5.8 ± 0.4

Electrical Downtiltcontinuously adjustable (°)

2 – 10

Tilt Accuracy (°) < 0.6 < 0.4 < 0.4 < 0.4 < 0.3

First Upper Side LobeSuppression (dB)

> 18 > 20 > 20 > 19 > 15

Cross Polar Isolation > 28 dB

Port to Port Isolation > 28 dB

Maximum Effective Powerper Port

200 W (at 50 °C ambient temperature)

Values based on ngmn-P-BASTA requirements.

Dual-Beam Panel

Frequency Range

HPBW

1695–2690

Y2

1695–2690

Y1

35°35°

7/21/2019 Kathrein-80010656 (6 gab)

http://slidepdf.com/reader/full/kathrein-80010656-6-gab 2/235For more information about additional mounting accessories please refer to page 189

Mechanical specifcations

Input 4 x 7-16 female

Connector Position bottom

Adjustment Mechanism 2x, Position bottomcontinuously adjustable

Wind load (N)(at Rated Wind Speed:150 km/h)

Maximum 780Frontal 680Lateral 190Rearside 780

Max. Wind Velocity (km/h) 200

Height / Width / Depth (mm) 1254 / 380 / 150

Category ofMounting Hardware

M (Medium)

Weight (kg) 17 / 19.2 (clamps incl.)

Packing Size (mm) 1696 / 402 / 172

Scope of Supply Panel and 2 units of clampsfor 42–115 mm diameter

Electrical specifcations, all systems

Impedance (Ω) 50

VSWR < 1.5

Return Loss (dB) > 14Interband Isolation (dB) > 28

Passive Intermodulation (dBc) < –150 (2 x 43 dBm carrier)

Polarization (°) –45, +45

Values based on ngmn-P-BASTA requirements.

Dual-Beam Panel

80010656