Kathrein 800 10290_Dual
2
Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Fax: (541) 779-3991 Email: [email protected] Internet: www.kathrein-scala.com * Mechanical design is based on environmental conditions as stipulated in TIA-222-G-2 (December 2009) and/or ETS 300 019-1-4 which include the static mechanical load imposed on an antenna by wind at maximum velocity. See the Engineering Section of the catalog for further details. 11328-B 936.3930/a • Wide band operation. • Exceptional intermodulation characteristics. • High strength pultruded fiberglass radome. • Integrated combiner. • Manual or optional remote control electrical tilt. 800 10290V01 Dual Band Directional Antenna General specifications: Frequency range 806–960 MHz 1710–2180 MHz Impedance 50 ohms VSWR <1.5:1 Intermodulation (2x20w) IM3: <-150 dBc Polarization +45° and -45° Connector 6 x 7-16 DIN female (long neck) Isolation intrasystem >30 dB intersystem >35 dB (806–960 // 1710–2180 MHz) intersystem >30 dB (1710–2180 // 1710–2180 MHz) Weight 46.3 lb (21 kg) 50.7 lb (23 kg) clamps included Dimensions 60.6 x 10.3 x 5.9 inches (1540 x 262 x 149 mm) Wind load at 93 mph (150kph) Front/Side/Rear 108 lbf / 68 lbf / 158 lbf (480 N / 300 N / 700 N) Mounting category M (Medium) Wind survival rating* 120 mph (200 kph) Shipping dimensions 73.5 x 11.1 x 7.2 inches (1866 x 282 x 182 mm) Shipping weight 57.3 lb (26 kg) Mounting Fixed mounts for 2 to 4.6 inch (50 to 115 mm) OD masts are included and tilt options are available. See reverse for order information. Specifications: 806–866 MHz 824–894 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1920–2180 MHz Gain tilt 0° 7° 14° 0° 7° 14° 0° 7° 14° 0° 7° 14°° 0° 7° 14° 0° 7° 14° (dbi) 14.4 14.3 14 14.6 14.4 14.2 14.9 14.7 14.4 bottom 14.5 14.5 14.2 14.8 14.8 14.5 15.1 14.8 14.4 top 14 14 13.7 14.4 14.3 13.9 14.9 14.8 14.2 Front-to-back ratio (180°±30°) >25 dB >25 dB >25 dB >25 dB >25 dB >25 dB Maximum input power 400 watts 400 watts 400 watts 250 watts 250 watts 250 watts per input (at 50°C) +45° and -45° polarization horizontal beamwidth 69° (half-power) 68° (half-power) 67° (half-power) 67° (half-power) 63° (half-power) 60° (half-power) vertical beamwidth 14.7° (half-power) 14.3° (half-power) 13.9° (half-power) 13.8° (half-power) 13.2° (half-power) 12.6° (half-power) Electrical downtilt 0°–14° 0°–14° 0°–14° bottom 0°–14° 0°–14° 0°–14° continuously adjustable top 0°–14° 0°–14° 0°–14° Sidelobe suppression for 0° 7° 14° T 0° 7° 14° T 0° 7° 14° T 0° 7° 14° T 0° 7° 14° T 0° 7° 14° T first sidelobe above main beam 18 16 16 dB 18 16 16 dB 18 17 16 dB 18 16 15 dB 18 17 17 dB 18 16 17 dB Cross polar ratio (typical) Main direction 0° 25 dB 25 dB 25 dB 20 dB 20 dB 20 dB Sector ±60° >10 dB >10 dB >10 dB >10 dB >10 dB >10 dB 1710–2180 MHz Horizontal pattern ±45°-polarization Vertical pattern ±45°-polarization 0°–14° electrical downtilt 806–960 MHz Horizontal pattern ±45°-polarization Vertical pattern ±45°-polarization 0°–14° electrical downtilt 0° 30° 60° 90° 120° 150° 180° 210° 240° 270° 300° 330° 3 10 20 30 0° 30° 60° 90° 120° 150° 180° 210° 240° 270° 300° 330° 3 10 20 30 0° 30° 60° 90° 120° 150° 180° 210° 240° 270° 300° 330° 3 10 20 30 0° 30° 60° 90° 120° 150° 180° 210° 240° 270° 300° 330° 3 10 20 30
description
K
Transcript of Kathrein 800 10290_Dual
Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Fax: (541) 779-3991Email: [email protected] Internet: www.kathrein-scala.com
* Mechanical design is based on environmental conditions as stipulated in TIA-222-G-2 (December 2009) and/or ETS 300 019-1-4 which include the static mechanical load imposed on an antenna by wind at maximum velocity. See the Engineering Section of the catalog for further details.
11328-B 936.3930/a
• Wide band operation.
• Exceptional intermodulation characteristics.
• High strength pultruded fiberglass radome.
• Integrated combiner.
• Manual or optional remote control electrical tilt.
800 10290V01
Dual Band Directional Antenna
General specifications: Frequency range 806–960 MHz
1710–2180 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Connector 6 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dB intersystem >35 dB (806–960 // 1710–2180 MHz) intersystem >30 dB (1710–2180 // 1710–2180 MHz)
Weight 46.3 lb (21 kg) 50.7 lb (23 kg) clamps included
Dimensions 60.6 x 10.3 x 5.9 inches (1540 x 262 x 149 mm)
Wind load at 93 mph (150kph) Front/Side/Rear 108 lbf / 68 lbf / 158 lbf (480 N / 300 N / 700 N) Mounting category M (Medium)
Wind survival rating* 120 mph (200 kph)
Shipping dimensions 73.5 x 11.1 x 7.2 inches (1866 x 282 x 182 mm)
Shipping weight 57.3 lb (26 kg)
Mounting Fixed mounts for 2 to 4.6 inch (50 to 115 mm) OD masts are included and tilt options are available.
See reverse for order information.
Specifications: 806–866 MHz 824–894 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1920–2180 MHzGain tilt 0° 7° 14° 0° 7° 14° 0° 7° 14° 0° 7° 14°° 0° 7° 14° 0° 7° 14° (dbi) 14.4 14.3 14 14.6 14.4 14.2 14.9 14.7 14.4 bottom 14.5 14.5 14.2 14.8 14.8 14.5 15.1 14.8 14.4 top 14 14 13.7 14.4 14.3 13.9 14.9 14.8 14.2
Front-to-back ratio (180°±30°) >25 dB >25 dB >25 dB >25 dB >25 dB >25 dB
Maximum input power 400 watts 400 watts 400 watts 250 watts 250 watts 250 watts per input (at 50°C)
+45° and -45° polarization horizontal beamwidth 69° (half-power) 68° (half-power) 67° (half-power) 67° (half-power) 63° (half-power) 60° (half-power) vertical beamwidth 14.7° (half-power) 14.3° (half-power) 13.9° (half-power) 13.8° (half-power) 13.2° (half-power) 12.6° (half-power)
Electrical downtilt 0°–14° 0°–14° 0°–14° bottom 0°–14° 0°–14° 0°–14° continuously adjustable top 0°–14° 0°–14° 0°–14°
Sidelobe suppression for 0° 7° 14° T 0° 7° 14° T 0° 7° 14° T 0° 7° 14° T 0° 7° 14° T 0° 7° 14° T first sidelobe above main beam 18 16 16 dB 18 16 16 dB 18 17 16 dB 18 16 15 dB 18 17 17 dB 18 16 17 dB
Cross polar ratio (typical) Main direction 0° 25 dB 25 dB 25 dB 20 dB 20 dB 20 dB Sector ±60° >10 dB >10 dB >10 dB >10 dB >10 dB >10 dB
1710–2180 MHz
Horizontal pattern ±45°-polarization
Vertical pattern ±45°-polarization
0°–14° electrical downtilt
806–960 MHz
Horizontal pattern ±45°-polarization
Vertical pattern ±45°-polarization
0°–14° electrical downtilt
0°
30°
60°
90°
120°
150°180°210°
240°
270°
300°
330° 3
10
20
30
0°
30°
60°
90°
120°
150°180°210°
240°
270°
300°
330° 3
10
20
30
0°
30°
60°
90°
120°
150°180°210°
240°
270°
300°
330° 3
10
20
30
0°
30°
60°
90°
120°
150°180°210°
240°
270°
300°
330° 3
10
20
30
All specifications are subject to change without notice. The latest specifications are available at www.kathrein-scala.com.
Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Fax: (541) 779-3991Email: [email protected] Internet: www.kathrein-scala.com
Order Information:Model Description
800 10290V01 Antenna with 7-16 DIN connectors
800 10290V01
Dual Band Directional Antenna
10.3 inches(262 mm)
60.6 inches(1540 mm)
5.9 inches(149 mm)
63.9 inches(1623 mm)
62.3 inches(1583 mm)
2.625 inches ± 0.125(68 mm ± 4)
long neck
35–4
2
68.7 inches(1745 mm)
–45° –45°RCU
1710–2180 top system
1710–2180
806–960
RCURCU
–45° +45°+45° +45°
bottom system
Layout of interface
Mounting Options:Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch (included) (50 to 115 mm) OD mast. 4.4 lb (2 kg)
850 10013 Tilt Mount Kit 0–13 degrees downtilt angle.
2 x 738 546 Mounting Kit(included)
64 mmM8
