katalog trend products 1 - 4 - odinmakine.com.tr · Base frame and undershelf of stainless steel...
Transcript of katalog trend products 1 - 4 - odinmakine.com.tr · Base frame and undershelf of stainless steel...
Trend products
1773Nailmaker's workshop moves into scythe production19th centuryThe scythe trademark becomes famous in both the Austro-Hungarian monarchy and all of Europe.
1964Introduction of a new manufacturing programme for stainless alloying steel Systems and equipment for abattoirs and butchers' shops
1998ISO 9001 certificate granted
1999Introduction of TQM system - Total Quality Management.
2001Production modernisation - laser-cutting machine, computerguided machines that guarantee the high quality of ourproducts
2003, 2004Application of new designs, further modernisation
History
ISO 9001Q-132
1
2
3
4
5
Product Groups
Tables, wardrobes, chairs
Trolleys, tanks
Corner and wall impact protection
Conveyor systems
Lift and tilt devices, ham presses, special mashinery
Beaded-edge table TRW-EBBase frame nad undershelf of stainless steel 1.4301. Adjustable plastic legs for stability on uneven surfaces. Table repository area (thickness 25 mm) with raised edging on 3 sides. Polyethylene table top 30 mm thick, white.
Counter available with undershelf or with footing only. Table top available in russet as well.
dimensions AxBxC mm
1500 x 90o x 900
2000 x 900 x 900
Type designation
TSE 150 x 90 S 25
TS-E 200 x 90 S 25
PE-top
white
white
Order no.
1030-105
1030-130
Chopping block HB-E Base structure of stainless steel 1.4301. Adjustable plastic legs for stability on uneven surfaces/Legs fitted with plastic screw insert for stability on uneven surfaces.
Replaceable polyethylene plate, width 60 mm, white
Chopping bloc HB-E with replaceable PE-plate
dimensions AxBxC mm
600 x 600 x 900
Type designation
HB-E 60 x 60Order no.
1060-101
Beaded-edge table TRW-EBComplete table of stainless steel 1.4301, tightly welded. Table top with beaded beaded edging. Drain piece in one corner and welded-in undershelf. Square-tube lages of stainless steel, fitted with screw insert for stability on uneven surfaces.
Table available with undershelf or with footing only. Optional: adjusted polyethylene table top, thickness 30 mm, white or russet.
Chopping bloc HB-E with replaceable PE-plate
dimensions AxBxC mm
2000 x 1000 x 900
Type designation
TRW-EB 200 x 100Order no.
1020 145
Step-type Shop Counter TS-E with PE table top
4
dimensions AxBxC mm
1500 x 700 x900
2000 x 1000 x 900
Type designation
TAM-EB 150 x 70
TAM-EB 200 x 100
PE-top
white
white
Order no.
1032-100
1032-112
Step-type Shop Counter TS-E with PE table top
Multipurpose Worktable TAM-EBGrundgestell und Zwischenboden aus Edelstahl rostfrei Base frame and undershelf of stainless steel 1.4301, tightly welded. Adjustable plastic legs for stability on uneven surfaces/Legs fitted with plastic screw insert for stability on uneven surfaces. Table top of polyethylene, thickness 20 mm, white.
Table available with undershelf or with footing only. Table top available in russet as well.
Double Step-type Table TSDBase frane and undershelf of stainless steel 1.4301 , tightly welded. Adjustable plastic legs for stability on uneven surfaces/Legs fitted with plastic screw insert for stability on uneven surfaces, table repository area thickness 25 mm. Table top of polyethylene, thickness 30 mm, white.6 legs on sizes exceeding 2500 mm.
suitable table top piece dimensions mm
2
2
4
4
4
4
2000 x 400 x 30
2000 x 400 x 30
1250 x 400 x 30
1250 x 400 x 30
1500 x 400 x 30
1500 x 400 x 30
Worktable ATUBase frame and table top of stainless steel 1.4301, tightly welded, raised rear edging 40 mm. Base structure open with bracing on three sides; floor clearance 150 mm. Adjustable plastic legs for stability on uneven surfaces/Legs fitted with plastic screw insert for stability on uneven surfaces.
Worktable ATU
dimensions AxBxC mm
1200 x 600 x 900
1400 x 600 x 900
1600 x 600 x 900
1200 x 700 x 900
1400 x 700 x 900
1600 x 700 x 900
Type designation
ATU 120x60
ATU 140x60
ATU 160x60
ATU 120x70
ATU 140x70
ATU 160x70
Order no.
1012-612
1012-614
1012-616
1012-712
1012-714
1012-716
1
dimensions AxBxC mm
2000 x 1200 x 900
2000 x 1400 x 900
2500 x 1200 x 900
2500 x 1400 x 900
3000 x 1200 x 900
3000 x 1400 x 900
Order no.
1031-120
1031-140
1031-122
1031-142
1031-124
1031-144
Type designation
TSD-EV 200x120
TSD-EV 200x140
TSD-EV 250x120
TSD-EV 250x140
TSD-EV 300x120
TSD-EV 300x140
Stainless steel double step-type table with PE table top
5
Worktables
Worktable ATR
Worktable ATB
dimensions AxBxC mm
1200 x 600 x 900
1400 x 600 x 900
1600 x 600 x 900
1200 x 700 x 900
1400 x 700 x 900
1600 x 700 x 900
Type designation
ATB 120x60
ATB 140x60
ATB 160x60
ATB 120x70
ATB 140x70
ATB 160x70
Order no.
1014-612
1014-614
1014-616
1014-712
1014-714
1014-716
Worktable ATBBase frame, table top and undershelf of stainless steel, tightly welded with raised rear edging 40 mm. Adjustable plastic legs for stability on uneven surfaces/Legs fitted with plastic screw insert for stability on uneven surfaces. 6 legs on sizes exceeding 2000 mm.
Worktable ATRBase frame, table top and screen (50 mm edged U profile) of stainless steel 1.4301. Tightly welded with raised rear edging 40 mm. Adjustable plastic legs for stability on uneven surfaces/Legs fitted with plastic screw insert for stability on uneven surfaces.
dimensions AxBxC mm
1200 x 600 x 900
1400 x 600 x 900
1600 x 600 x 900
1200 x 700 x 900
1400 x 700 x 900
1600 x 700 x 900
Type designation
ATR 120x60
ATR 140x60
ATR 160x60
ATR 120x70
ATR 140x70
ATR 160x70
Order no.
1016-612
1016-614
1016-616
1016-712
1016-714
1016-716
dimensions AxBxC mm
600 x 600 x 900
Type designation
HB-E 60 x 60Order no.
1060-101
Chopping bloc HB-E with replaceable PE-plate
Chopping block HB-E Base structure of stainless steel 1.4301. Adjustable plastic legs for stability on uneven surfaces/Legs fitted with plastic screw insert for stability on uneven surfaces. Replaceable polyethylene plate, width 60 mm, white
6
Available in various lengths. Cutting-up belt width 600 or 800 mm. Cutting-up tables can be set up parallely or rectangularly against the bel. Swivel table available instead of sorting table.
Ask for customized offer.
Cutting-up conveyor system TZEBase structure of stainless steel 1.4301. Two polyethylene table tops, width 30 mm, rails for 6 EURO crates. Adjustable plastic legs for stability on uneven surfaces/Legs fitted with plastic screw insert for stability on uneven surfaces.
Chopping bloc HB-E with replaceable PE-plate
dimensions AxBxC mm
2000 x 1000 x 900
Type designation
TRW-EB 200 x 100Order no.
1020 145
1Cutting-up systems
Cutting-up conveyor system ZBAComprised of pre-cutting table with transfer section for pork-halves or beef-quarters. Cutting-up, approach and sorting tables set up parallel to conveyor belt. All table tops white, madel of polyethylene. Base structure of stainless steel. Cutting-up belt consists of drive station with motor, intermediate units and guide station with quick tensioning feature. Steel belt 0,8 mm of stainless steel 1.4301. Transfer rollers at the beginning and at the end of the cutting-belt. Belt speed adjustable from of 2 to 12 m/min.
mains connection: 400V, 50 Hz
Wattage: 0,55 kW
version
Elements below
dimensions LxWxH mm
5600 x 2000 x 900No.
1
Type designation
ZBA-E 560x200x90
Cutting-up conveyor system ZBA, complete
Order no.
4510-001
Cutting-up conveyor system ZBA comprises:
version
Pre-cutting table
Table top
Steel belt conveyor
Steel belt
Cutting-up table
Table top
Sorting table
Table top
dimensions LxWxH mm
2000x800x900
2000x800x30
4000x785x900
600x0,8
1000x400x900
1000x400x30
2000x800x900
2000x800x30
no.
1
1
1
1
8
8
1
1
7
Cleaner's Locker APS
Locker (cupboard) designed for storage of cleaning detergants and cleaning equipment. Completely made from stainless steel with dustproof slanting top, four adjustable shelves or additional broom compartment. Ventholes in the door and at the bottom of the locker for proper ventilation.
Individual Cleaner's locker types X2010BA and X2004B
Dimensions L x W x H mm
500 x 500 x 2300
500 x 500 x 2300
Type
individual with 4 shelves
individual with 4 shelves
and broom compartment
Type
X2004BA
X2010BA
Cleaner's locker APS
Multiple Wardrobe
Wardrobes for storage of helmets, aprons and boots in double or multiple version. Ventholes in the door are made for proper ventilation. Completely made from stainless steel with dustproof slanting top, internal partition so work clothes will not touch the “town” cloths, adjustable plastic legs ensure stability on uneven surfaces. You can choose from vast palette of additional options -two or more doors, perforated doors, bench, lock with key or padlock, etc.
Dimensions
(with a bench)
950 x 500 x 2300
Dimensions
L x W x H mm
950 x 500 x 2300
Stainless steel
plate thickness
0,8 mm
Wardrobe KSD
Order Code
(two doors)
X1012BA
Wardrobe KSE
has two separated divisions for work and free time clothing, every section is equipped with hooks for hanging the clothes and 2 bottom shelves. The central space in the wardrobe is in that way made so that the clothing for work and free time separated are. Two wings opening out of stainless steel 1.4301, material thickness 1 mm, with curvy roof, ventilating fan in the floor and in the doors are used for ventilating and air mixing.
Dimensions L x W x H mm
500x500x2160
Order no.
9405-022
Cleaner's locker APS
Type
KSE-AB 9001
Material
steel
8
1Wardrobes
Work Cabinet ATOZ
Base frame of stainless steel 1.4301, enclosed on all sides. Cabinet top of stainless steel 1.4301 as well, raised rear edging 40 mm. Base structure enclosed on three sides, open in the front. Adjustable shelves and adjustable plastic legs for stability on uneven surfaces/Legs fitted with plastic screw insert for stability on uneven surfaces.
dimensions LxWxH mm
1200 x 600 x 850
1400 x 600 x 850
1600 x 600 x 850
1200 x 700 x 850
1400 x 700 x 850
1600 x 700 x 850
Order no.
1042-612
1041-614
1041-616
1041-712
1041-714
1041-716
Type designation
ATOZ 120 x 60
ATOZ 140 x 60
ATOZ 160 x 60
ATOZ 120 x 7O
ATOZ 140 x 70
ATOZ 160 x 70
Work Cabinet ATOZ
Work Cabinet ATFZ
Base frame of stainless steel 1.4301, enclosed on all sides. Top of stainless steel 1.4301 as well, raised rear edging 40 mm. Base structure enclosed on all sides, 18 mm thick double-walled hinged doors in the front. 1600 mm long versiobn with three hinged doors. Adjustable shelves. Adjustable shelves and adjustable plastic legs for stability on uneven surfaces/Legs fitted with plastic screw insert for
dimensions LxWxH mm
1200 x 600 x 850
1400 x 600 x 850
1600 x 600 x 850
1200 x 700 x 850
1400 x 700 x 850
1600 x 700 x 850
Order no.
1042 612
1042 614
1042 616
1042 712
1042 714
1042 716
Type designation
ATFZ 120 x 60
ATFZ 140 x 60
ATFZ 160 x 60
ATFZ 120 x 70
ATFZ 140 x 70
ATFZ 160 x 70
Work Cabinet AFTZ
Gastronome Cabinet AGN
Base frame of stainless steel 1.4301, enclosed on all sides. Top of stainless steel 1.4301 as well, raised rear edging 40 mm. Base structure enclosed on three sides, with one, two or three compartments, each compartment provided with 7 pairs of angle rails for conatiners, trays or roasters in conformity with 1/1, 2/1 gastronome standard. Adjustable shelves and adjustable plastic legs for stability on uneven surfaces/Legs fitted with plastic screw insert for stability on uneven surfaces.
dimensions LxWxH mm
445 x 700 x 850
800 x 700 x 850
1200 x 700 x 850
Order no.
1043-708
1043-712
1043-745
Type designation
AGN 1-70
AGN 2-70
AGN 3-70
Work Cabinet AGN
9
1Desks, chairs
High Desk PS-EComplete of stainless steel 1.4301 with spacious drawer and swing-up lid, with or without lock. Adjustable shelves and adjustable plastic legs for stability on uneven surfaces/ Legs fitted with plastic screw insert for stability on uneven surfaces.
dimensions AxBxC mm
600 x 500 x 1233
600 x 500 x 1233
Type designation
PS-E 60 x 50 S
PS-E 60 x 50
lock
with
without
Order no.
1080-011
1080-010
High Desk PS-E
Wall-mounted desk PW-EComplete of stainless steel 1.4301 with spacious drawer and swing-up lid, with or without lock.
dimensions AxBxC mm
600 x 500 x 250
600 x 500 x 250
Type designation
PW-E 60 x 50 S
PW-E 60 x 50
lock
with
without
Order no.
1080-016
1080-015
Wall-mounted desk PW-E
Standing posture aid SH-EStanding posture aid relieves the body and stimulates performance. NIROS standing posture aid is specially designed for employees working in standing position. Standing posture aid relieves the legs and back muscles up to 60 70%. Adjustable and collapsible seat and backrest. Frame of stainless steel 1.4301. Black foam-upholestered seat and backrest.
dimensions LxWxH mm
500 x 400 x 950Type designation
SH-E 50 x 40 x 95
Standing posture aid SH-E
Order no.
7580 001
Swing chair STD-E1Three-legged construction of stainless steel 1.4301, swing seat 0 350 mm of grey PE plate. Adjustable seat height (from 450 up to 600 mm). Round-tube base frame.
Chair ST-E1Stainless steel 1.4301construction, seat and backrest of grey PE plate.Seat height 500 mm, 400 x 400 mm, backrest 360 x 200 mm, total height 800 mm. Square-tube base frame.
dimensions LxWxH mm
400 x 400 x 800Type designation
ST-E1
Swing chair STD-E1
Order no.
8500 - 709
dimensions LxWxH mm
O350 x 450(600)Type designation
STD-E1
Swing chair STD-E1
Order no.
8500 - 706
10
Angle rack shelves SRW, steel 1 - Rack depth B = 430 m
Starting rack / Add-on
rack length A mm
600
700
800
900
1000
1100
1200
1500
1700
1900
4 shelves
1 PU*order no.
1051-340
1051-341
1051-342
1051-343
1051-344
1051-345
1051-346
1051-349
1051-351
1051-352
1 shelf
1 PU* order no.
1051-310
1051-311
1051-312
1051-313
1051-314
1051-315
1051-316
1051-319
1051-321
1051-322
Storage racks
* Easy assembly, screw-mounted
* Adjustable grids 200 mm, standard rack height 1800 mm
* Each rack accomodates up to 9 shelves 200 mm apart
* Two rack depths: 430 mm and 550 mm (overall dimensions)
* Twelve rack lenghts: 600 mm to 1900 mm (overall dimensions)
* Shelf capacity 200 kg of evenly distributed weight/load
* 1000 kg (rack load capacity= number of shelves x shelf capacity)
* system extensions with additional racks and angle reinforcement
NIEROS storage racksFeatures:Racks consist of legs and shelves screw-assembled at the corners. All shelves with 50 mm double edging. Centre reinforcement in racks exceeding 1700 mm length and 430 mm depth. Centre reinforcement in all racks exceeding 550 mm in depth.
Legs with plastic screw inserts for rack stability on uneven floors, cap-sealed on the top.
Nine nuts spaced 200 mm apart enable the desired height adjustment. Empty nutholes are cap-sealed.
Starting racks comprise of 4 legs and the desired number of shelves. (max. 9, min. 2).
Add-on racks always have 2 legs and are screwed to shelves. One shelf should always be mounted on the bottom and top.
dimensions LxWxH mm
900 x 430 x 1800
1400 x 430 x 1800
1900 x 430 x 1800
Type designation
SR-E 43x90 V 20/4
SR-E 43x140 V 20/4
SR-E 43x190 V 20/4
Order no.
1051-513
1051-518
1051-522
Storage rack SR-E 43, steel, 4 shelves
No. of shelves
4
4
4
11
1
Angle rack shelves SRW, steel 1 - Rack depth B = 450 m
Starting rack / Add-on
rack length A mm
600
700
800
900
1000
1100
1200
1500
1700
1900
4 shelves
1 PU*order no.
1051-440
1051-441
1051-442
1051-443
1051-444
1051-445
1051-446
1051-449
1051-451
1051-452
1 shelf
1 PU* order no.
1051-310
1051-311
1051-312
1051-313
1051-314
1051-315
1051-316
1051-319
1051-321
1051-322
Legs for starting rack 4 to a pack = 1 PU* single?
Legs for add-on rack 2 to a pack = 1 PU* double?
Spare leg 1 to a pack = 1 PU* single
1051-303
1051-302
1051-301
Steel legs for storage racks
Dimensions: all of the above dimensions are overall dimensions in mm. Add-on rack length = starting rack length - 45 mm (for 2 legs).
Starting rack / add-on
rack length A mm
Type W 1
900
1400
1900
Type W 2
900
1400
1900
Type W 3
900
1400
1900
Type W 4
900
1400
1900
Type W 5
900
1400
1900
4 shelves
1 PU* Order no.
1051-818
1051-823
1051-827
1051-833
1051-838
1051- 842
1051-848
1051-853
1051-857
1051-863
1051-868
1051-872
1051-878
1051-883
1051-887
1 shelf
1 PU* Order no.
1051-618
1051-623
1051-627
1051-633
1051-638
1051- 642
1051-648
1051-653
1051-657
1051-663
1051-668
1051-672
1051-678
1051-638
1051-687
Angle rack shelves SRW, steel 2 - Rack depth B = 430 mm
Starting rack / add-on
rack length A mm
Type W 1
900
1400
1900
Type W 2
900
1400
1900
Type W 3
900
1400
1900
Type W 4
900
1400
1900
Type W 5
900
1400
1900
4 shelves
1 PU* Order no.
1051-918
1051-923
1051-927
1051-933
1051-938
1051-942
1051-948
1051-953
1051-957
1051-963
1051-968
1051-972
1051-978
1051-983
1051-987
1 shelf
1 PU* Order no.
1051-718
1051-723
1051-727
1051-733
1051-738
1051-742
1051-748
1051-753
1051-757
1051-763
1051-768
1051-772
1051-778
1051-783
1051-787
Angle rack shelves SRW, steel 2 - Rack depth B = 550 mm
Review/ combinations
All of the above dimensions are overall dimensions in mm.Ordering instructions 1.Number of shelves (types W 1and in W 2) and angles W 3, W 4 and W 5 must always match (due to assembly). 2.Number of legs:- type W 1 + W 3 = 1 x 4 pieces/shelves + 1 x pieces/shelves- type W 2 + W 4 = 1 x 4 pieces/shelves + 1x pieces/- type W1 + W 2 + W 5 = 1 x 4 pieces/shelves + 2 x 2 pieces/shelves
12
NIEROS special storage racks - optimal for cold-storage and - tightly welded sturdy construction enables optimal stability and long-life servicecommission romms with limited area. Suitable for storage - Shelves inclined forward provide easy accessand sale on commission rooms in trade, commerce and - Easy cleaning due to smooth surface, in conformity with food-processing industry.hygienic standards- Modular construction enables customized racks Special storage racks - suitable for storage of EURO crates in conformity - Easy set up, no aseembling required! with DIN 55 429. Shelves inclined forward, thus enabling a better control
of the goods and easy approach.
Advantages:- storage of large quantities at moderate space consumption
Container trolley BHU
version
Universal 140l
Universal 170l
Universal 200l
dimensions
length A mm
600
700
800
Type
designation
BHU 140
BHU 170
BHU 200
Order no.
3090-012
3090-022
3090-023
Special storage racks
min. Length
max. Length
max. Height
min. Height
Depth
910 mm
2960 mm
2070 mm s stebri
1350 mm s stebri
657 mm
Customized racks within min. And max. Length and height.
Complete of stainless steel 1.4301 with tightly welded beaded edging, dump lip, push handle and with or without hoist fittings. Reinforced base adn 4 polyamide wheels D150 mm. Centre wheels raised.
USDA version corresponds DIN 9797but with drip edge below dump lip.
The base of NIEROS trolleys is additionaly reinforced by a 3 mm thick tightly welded steel plate thus enabling optimum stability and quiet running.
Container trolley BHUMade of stainless steel 1.4301. Tightly welded container with rounded corners and push handle. Available in 3 different sizes. 4 rubber swivel castor 0=100 mm ensure quiet running. Conatiner suitable for waste, fluids and transport or as storage bin. Available with lid and drain cock as well.
capacity litre200200200200300300200200300300
versionstandard
standard DIN 9797standard- NIEROSstandard- NIEROS
Standardstandard DIN 9797
USDAUSDA (DIN 9797)
USDAUSDA (DIN 9797)
Hoist containerwithout
withwithout
withwithout
withwithout
withwithout
with
Wall- thickness mm22
1,51,5222222
Dimensions AxBxC mm790 x 675 x 700790 x 675 x 700790 x 675 x 700790 x 675 x 700790 x 675 x 950790 x 675 x 950790 x 675 x 700790 x 675 x 700790 x 675 x 950790 x 675 x 950
fittings depth D510510510510760 760 510510760760
wheel150150150150150150150150150150
weight kg38402931-485038404850
Order no.3000 - 0113000 - 0103000 - 0203000-0253000-0423000-0353000 -1273000 - 0303000 - 0413000 - 040
Trolleys
2
13
dimensions AxBxC mm
1026 x 635 x 800
Bin size inside mm
895 x 595 x 350wheelO
150
Tyoe designation
TWK-E 102 x 65-P2Order no.
3031- 016
dimensions AxBxC mm
1026 x 635 x 800
Bin size inside mm
895 x 595 x 350wheelO
150
Tyoe designation
TWK-E 102 x 65-POOrder no.
3031 - 018
Mixing trough MUMComplete of stainless steel 1.4301, trough wall thickness 2 mm or 1,5 mm (150 and 200 I light version). Tightly welded beaded edging and push handle. Drain with screw plug in the front end. Fitted with 2 swivel castors (1x brake) and 2 fixed castors of polyamide (mixing trough 150 l - 2 fixed castors, 2 legs).
capacity l
150
200
dimensions AxBxC mm
1095 x 740 x 810
1235 x 740 x 810
trough D mm
365
365
wheelO
150
150
Mixing trough, steel, light version
Type designation
MUML 109x74-150
MUML 123x74-200
Order no.
3005 - 008
3005 - 009
capacity l
150
200
250
300
dimensions AxBxC mm
1095 x 740 x 810
1235 x 740 x 810
1435 x 740 x 810
1681 x 740 x 810
trough D mm
365
365
365
365
wheelO
150
150
150
150
Mixing trough, steel, industry version
Type designation
MUM 109x74-150
MUM 123x74-200
MUM 143x74-250
MUM 168x74-300
Order no.
3005 - 005
3005 - 010
3005 - 015
3005 - 025
Transporting trough MUTComplete of stainless steel 1.4301, trough wall thickness 2 mm with tightly welded beaded edging. Drain with screw plug abd 4 polyamide wheels. Centre wheels raised
capacity l
500
800
dimensions AxBxC mm
1850 x 910 x 750
2050 x1010 x 780
wheel 0 D outside centre
Mixing trough, steel, industry version
Type designation
185 x 91 x 75-500
205 x101 x 78-800
Order no.
3058-005
3058-913200150
300300
428553
Bin trolley TWK-EComplete of stainless steel 1.4301. Tightly welded container with beaded edging and push handle. Optimal for quick, hygienic and safe transport of foods (e.g. cold storage rooms).Wall thickness 1,5 mm. Steel wheel holder. 2 swivel and 2 fixed castors of polyamide.
Bin trolley TWK-E, polyamide wheels, 2 fixed
Bin trolley TWK-E, polyamide wheels, non-lockable
14
capacity l
450
825
Tank depth D
640
720
Type designation
BHP 115x 76x450
BHP 125x102x825
Dimensions AxBxCmm
1156 x 766 x 800
1256 x1026x 880
Order no.
3055-005
3055-010
Stack ng conta ner BHSComplete of stainless steel 1.4301, wall thickness 2 mm with tighty welded beaded perimeter edging. Stacking corner, 2 buckets, approachable.
Container is extremely sturdy, optimal for warehouses, where containers are stored in stacks.
i i
Brine tank BHPComplete of stainless steel 1.4301, wall thickness 2 mm with tighty welded beaded perimeter edging and stacking legs. Drain with screw plug.
Cooling container BHKComplete of stainless steel 1.4301, wall thickness 2 mm with tighty welded beaded perimeter edging. Drain with screw plug. 4 polyamide wheels. Centre wheels raised. Optional: stand pipe overflow.
capacity l
630
Container depth D
718Type designation
BHS 125x85-630
weight kg
95
dimensions AxBxC mm
1250 x 850 x 875
Stacking container
Order no.
3056-005
Storage rack SR-E 43, steel, 4 shelves
capacity
L
200
300
400
Container
depth D
510
490
490
wheelO
150
150
150
Dimensions AxBxCmm
750 x 680 x 700
990 x 690 x 680
1040 x 950 x 680
Stand pipe overflow 480 mm
Order no.
3050 - 005
3050-010
3050-015
3050 - 299
Type designation
BHK 76x68-200
BHK 99x69-300
BHK104x84-400
BHKZ-SR 48
Cooling container
Cooling container optionals
2
15
Standard clearing trolley AWS-EStainless steel 1.4301, 12-, 18- or 20-tier. Wheel holder varnished. 4 rubber swivel wheels 0 125 mm. Wheels non-lockable. Available with 2 fixed wheels.
dimensions AxBxC mm
610 x 455 x 1580
610 x 455 x 1580
610 x 455 x 1730
410 x 645 x 1730
610 x 445 x 1580
610 x 455 x 1580
610 x 455 x 1730
410 x 645 x 1730
Order no.
3033- 202
3033- 203
3033- 201
3033- 221
3033- 212
3033- 213
3033- 211
3033- 224
Type designation
AWS-E 61x45x158-12/0
AWS-E 61x45x158-18/0
AWS-E 61x45x173-20/0
AWS-E 41x64x173-20/0
AWS-E 61x45x158-12/2
AWS-E 61x45x185-18/2
AWS-E 61x45x173-20/2
AWS-E 41x64x173-20/2
Standard clear ng trolley AWS-E, non-lockable, without trays i
No.
12
18
20
20
12
18
20
20
tiersspacing
116
75
75
75
116
75
75
75
Standard clearing trolley AWS-E, 2 fixed wheels, without trays
dimensions AxBxC mm
600 x 400 x 10
600 x 400
Type designation
AWSZ-TE 60 x 40 x 1
AWSZ-RE 60 x 40
version
Tray, steel
grate, steel
Order no.
3033-101
3033-191
Accessor es for Standard clear ng trolley AWS i i
Gastro clearing trolley AWG-EStainless steel 1.4301, 18- tier 18 (75 spacing) for gastronom containers 1/1 and 2/1. Wheel holder varnished. 4 rubber swivel wheels 0 125 mm. Wheels non-lockable. Available with 2 fixed wheels.
dimensions AxBxC
mm
600 x 372 x 1700
670 x 577 x 1700
600 x 372 x 1700
670 x 577 x 1700
tiers
No.
18
18
18
18
Container
size mm
530 x 325
650 x 530
530 x 325
650 x 530
GN
1/1
2/1
1/1
2/1
spacing
75
75
75
75
Gastro clearing trolley AWG-E, 2 fixed wheels, without containers
Gastro clearing trolley AWG-E, non-lockable, without containers
Type designation
AWG-E 60x37x170-18/0
AWG-E 67x57x170-18/0
AWG-E 60x37x170-18/2
AWG-E 67x57x170-18/2
Order no.
3034- 231
3034- 241
3034- 232
3034- 242
16
Counter clearing trolley AWT-EStainless steel 1.4301, for 5 aluminium or stainless steel 1.4301 trays. Tray spacing 220 mm. Wheel holder varnished. 4 rubber swivel wheels 0 125 mm. Wheels non-lockable. Available with 2 fixed wheels.
dimensions AxBxC mm
610 x 430 x 1400
650 x 580 x 1400
610 x 430 x 1400
650 x 580 x 1400
Order no.
3035- 202
3035- 204
3035- 212
3035- 214
tiers spacing
220
220
220
220
Tray size mm
610 x 380 x 50
650 x 530 x 50
610 x 380 x 50
650 x 530 x 50
number
5
5
5
5
Type designation
AWT-E 61x43x140-5/0
AWT-E 65x58x140-5/0
AWT-E 61x43x140-5/2
AWT-E 65x58x140-5/2
dimensions AxBxC mm
610 x 380 x 50
650 x 530 x 50
Type designation
AWTZ-WE 61x38x5
AWTZ-WE 65x53x5
version
Tray, steel
Tray, steel
Order no.
3036- 402
3036- 404
Trays for Counter clearing trolley AWT
Counter clearing trolley AWL-EStainless steel 1.4301, for 5 aluminium or stainless steel 1.4301 trays. Tray spacing 116 mm. Wheel holder varnished. 4 rubber swivel wheels 0 125 mm. Wheels non-lockable. Available with 2 fixed wheels.
dimensions AxBxC mm
600 x 348 x 1400
600 x 348 x 1400
Order no.
3032- 201
3032- 211
tiers spacing
116
116
Tray size mm
600 x 300 x 20
600 x 300 x 20
number
10
10
Type designation
AWLE 60x34x140-10/0
AWLE 60x34x140-10/2
Counter clearing trolley AWL-E, non-lockable, without trays
Counter clearing trolley AWL-E, 2 fixed, without trays
dimensions AxBxC mm
600 x 300 x 20
Type designation
AWLZ-TE 60 x 30 x 2version
Tray, steel
Order no.
3032 -108
Trays for Counter clearing trolley AWT
Counter clearing trolley AWT-E, non-lockable, without trays
Counter clearing trolley AWT-E, 2 fixed, without trays
17
Warehouse trolley TWM-ERound-tube frame of stainless steel 1.4301. Wheel holders varnished. 2 swivel and 2 fixed wheels of rubber or polyamide.
dimensions AxBxC mm
1060 x 450 x 950
1210 x 700 x 950
1060 x 450 x 950
1210 x 700 x 950
1060 x 450 x 950
1210 x 700 x 950
1060 x 450 x 950
1210 x 700 x 950
Order no.
3020-201
3020-311
3020-203
3020-313
3020-202
3020-312
3020-204
3020-314
Type designation
TWM-E 106x45-1/G0
TWM-E 121x70-1/G0
TWM-E 106x45-1 /G2
TWM-E 121x70-1/1G2
TWM-E 106x45-1 /PO
TWM-E 121x70-1/PO
TWM-E 106x45-1/P2
TWM-E 121x70-1/P2
Platform area mm
850 x 450
1000x700
850 x 450
1000 x 700
850 x 450
1000 x 700
850 x 450
1000 x 700
Warehouse trolley TWM-E, rubber wheels, non-lockable
Warehouse trolley TWM-E, rubber wheels, 2 fixed
Warehouse trolley TWM-E, polyamide wheels, non-lockable
Warehouse trolley TWM-E, polyamide wheels, 2 fixed
wheelO
125
160
125
160
125
150
125
150
dimensions AxBxC mm
1060 x 450 x 950
1210 x 700 x 950
1060 x 450 x 950
1210 x 700 x 950
1060 x 450 x 950
1210 x 700 x 950
1060 x 450 x 950
1210 x 700 x 950
Order no.
3020-211
3020-301
3020-216
3020-306
3020-212
3020-302
3020-217
3020-307
Type designation
TWM-EN 106x45-1/G0
TWM-EN 121x70-1/G0
TWM-EN 106x45-1 /G2
TWM-EN 121x70-1/1G2
TWM-EN 106x45-1 /PO
TWM-EN 121x70-1/PO
TWM-EN 106x45-1/P2
TWM-EN 121x70-1/P2
Platform area mm
850 x 450
1000 x 700
850 x 450
1000 x 700
850 x 450
1000 x 700
850 x 450
1000 x 700
Warehouse trolley TWM-EN, rubber wheels, non-lockable
Warehouse trolley TWM-EN, rubber wheels, 2 fixed
Warehouse trolley TWM-EN, polyamide wheels, non-lockable
Warehouse trolley TWM-EN, polyamide wheels, 2 fixed
wheelO
125
160
125
160
125
150
125
150
Warehouse trolley TWM-EN with polyethylene platformRound-tube frame of stainless steel 1.4301. Polyethylene platform 15 mm thick, russet. Steel wheel holders. 2 swivel and 2 fixed wheels of rubber or polyamide.
Warehouse trolley TWM-EE with steel platformComplete of stainless steel 1.4301. Platform with beaded edging. Steel wheel holders. Steel wheel holders. 2 swivel and 2 fixed wheels of rubber or polyamide.
dimensions AxBxC mm
1060 x 450 x 950
1210 x 700 x 950
1060 x 450 x 950
1210 x 700 x 950
1060 x 450 x 950
1210 x 700 x 950
1060 x 450 x 950
1210 x 700 x 950
Order no.
3020-601
3020-611
3020-603
3020-613
3020-605
3020-615
3020-607
3020-617
Type designation
TWM-EE 106x45-1/G0
TWM-EE 121x70-1/G0
TWM-EE 106x45-1 /G2
TWM-EE 121x70-1/1G2
TWM-EE 106x45-1 /PO
TWM-EE 121x70-1/PO
TWM-EE 106x45-1/P2
TWM-EE 121x70-1/P2
Platform area mm
850 x 450
1000 x 700
850 x 450
1000 x 700
850 x 450
1000 x 700
850 x 450
1000 x 700
Warehouse trolley TWM-EE, rubber wheels, non-lockable
Warehouse trolley TWM-EE, rubber wheels, 2 fixed
Warehouse trolley TWM-EE, polyamide wheels, non-lockable
Warehouse trolley TWM-EE, polyamide wheels, 2 fixed
wheelO
125
160
125
160
125
150
125
150
dimensions
350x230Type designation
TWTZ-E 32x23
Order no.
1080-805
Optionals for table trolley - Writin-pad with clip
Table trolley TWT-ENRound-tube stainless steel 1.4301 frame. With 2 or 3 polyethylene 15 mm thick tiers, russet. Steel wheel holder. 2 swivel and 2 fixed wheels of rubber or polyamide. Optional: writing-pad of stainless steel 1.4301, 350 x 230 mm, with clip.
dimensions AxBxC
mm
1080 x 600 x 950
1080 x 600 x 950
1080 x 600 x 950
1080 x 600 x 950
1080 x 600 x 950
1080 x 600 x 950
1080 x 600 x 950
1080 x 600 x 950
Order no.
3021-101
3021-201
3021-106
3021-211
3021-102
3021-202
3021-107
3021-212
Type designation
TWT-EN 108x60-2/GO
TWT-EN 108x60-3/GO
TWT-EN 108x60-2/G2
TWT-EN 108x60-3/132
TWT-EN 108x60-2/PO
TWT-EN 108x60-3/PO
TWT-EN 108x60-2/P2
TWT-EN 108x60-3/P2
Platform area
mm
940 x 540
940 x 540
940 x 540
940 x 540
940 x 540
940 x 540
940 x 540
940 x 540
Table trolley TWT-EN, rubber wheels, non-lockable
wheel
O
125
125
125
125
125
125
125
125
tiers
no height
2
3
2
3
2
3
2
3
wheelO
420
210
420
210
420
210
420
210
Table trolley TWT-EN, rubber wheels, 2 fixed
Table trolley TWT-EN, polyamide wheels, non-lockable
Table trolley TWT-EN, polyamide wheels, 2 fixed
18
dimensions AxBxC mm
1000 x 912 x 1980
1000 x 1012 x 1980
1000 x 912 x 1980
1000 x 1012 x 1980
Order no.
3025-009
3025-010
3025-403
3025-404
handle
with
with
with
with
Smoking rod
length support
Smoking trolley RW
tiers no
6
6
6
6
900
1000
900
1000
embossed
embossed
punched
punched
Smoking trolley RWExtra sturdy industry design, exceptionally stable. Capacity 600 kg. Stainless steel 1.4301, for smoking rods lenghts 900 or 1000 mm, with punched or embosed steel suport. Tier spacing 270 or 190 mm. Square-frame 60 x 40 with or without handles. 6 polyamide wheels, 4 of them D 150 mm. Raised centre wheels D 200.
dimensions AxBxC
mm
1200 x 750 x 1800
Order no.
3037- 112
Type designation
TWA-E 120x75x180-3/60
No. of
hooks fixed
60
Hook trolley TWA - E, steel
wheelO
150
tiers
no.
3
Hook trolley TWASquare-tube stainless steel 1.4301 base frame 60 x 40. Removable tray, stainless steel 1.4301meat hooks. 2 swivel and 2 fixed polyamide wheels.
2
19
Smoking trayOf stainless steel 1.4301, edges reinforced, with 2 handles. Overall height (with handles) 100 mm. Perforated, uneperforated or screen base.
dimensions LxWxH mm
990 x 430 x 40
890 x 430 x 40
990 x 430 x 40
890 x 430 x 40
990 x 430 x 40
890 x 430 x 40
Order no.
3025-451
3025-452
3025-461
3025-462
3025-454
302- 455
Type designation
RWBS-E 99x43x4-G
RWBS-E 89x43x4-G
RWBS-E 99x43x4
RWBS-E 89x43x4
RWBS-E 99x43x4-N
RWBS-E 89x43x4-N
version
perforated
unperforated
unperforated
perforated
screen
screen
Smoking tray
Smoking stick
Made of aluminium, stellar shape,...
length mm
900
1000
Order no.
9316 - 000
9316 - 005
Type designation
RSA 345-900
RSA 345-1000
weight g/m
345
345
Smoking rod
Trolley RWS for smoking rodsOptimal for tidiness in sausage production. Complete of stainless teel 1.4301, capacaity cca.400 smoking rods. 4 swivel polyamide wheels.
Trolley RWS-E
dimensions AxBxC
mm
500 x 350 x 700
Order no.
3027-010
Type designation
RSW-E 50x35x70
wheel
O
100
wheel
holder
steel
20
Boiled ham mould KSFS-EMould is rectangular shape, welded version, complete of stainless steel 1.4301. Wall thickness 2 mm. With handle, toothed rack and lid springs.
Boiled ham mould KSFS-E, rectangular, welded
dimensions AxBxC mm
290 x 160 x 140
310 x 180 x 150
capacity - kg
4-6
6-8
Order no.
3100-050
3100-029
Type designation
KSFS-E 29 x 16 x 14
KSFS-E 31 x 18 x 15
Boiled ham mould KSFS-EMould is rectangular shape, welded version, complete of stainless steel 1.4301. Wall thickness 2 mm. With handle, toothed rack and lid springs.
Boiled ham mould KSFZ-E, rectangular, seamless, deep-drawn
dimensions AxBxC
mm
290 x160 x 140
290 x160 x 140
capacity
kg
5-6
5-6
Order no.
3100 010
3100-011
Type designation
KSFZ-E 29x16x14 FO
KSFZ-E 29x16x14 FR
shape
springs
Ovalna
Okrogla
Boiled pizza ham mould KSFP-EMould completely of stainless steel 1.4301, welded. Wall thickness 1 mm. With lid, hinge and quick-type closure.
Boiled pizza ham mould KSFP-E
dimensions AxBxC mm
350 x 105 x 100
capacity - kg
3,5Order no.
3100-400
Type designation
KSFP-E 35x10x10
Boiled ham mould KSFJ-EMould completely of stainless steel 1.4301, welded. Wall thickness 2 mm.With handle, toothed rack and lid springs.
Boiled ham mould KSFJ-E
dimensions AxBxC mm
700 x 165 x 147
capacity - kg
15- 18Order no.
3100-060
Type designation
KSFJ-E 70x16x14
2
21
Ham moulds
NIEROS pallets are in conformity with DIN standards and meet high quality standards. They are suitable for a variety of uses in food- meet-processing industry as well as in chemical
Flat pallet PAFPallet frame of tightly welded square-tube sections. Stainless steel 1.4301, 4 sturdy feet. Approachable from all sides. Extreme stability. Load capacity details refer do the pallet bearing capacity when stacking and apply to evenly distributed load.
dimensions AxBxC
mm
1200 x 800 x 150
Order no.
3210 -101
Type designation
RSW-E 50x35x70
Rung
distance
82
weight
kg
21,5
Pallet PAF-E, steel
capacity
kg
1000
disinfect Advantages: - long-life - high-quality material- temperature resistant (-- resistant to cleaning 40°C to +70°C)agents - constant weight - dimensional accuracy - weather resistant - neutral odour and *With use in pallet racks the tasteload capacity reduces to - easy to clean and 600 kg
dimensions KxWxH
mm
1200 x 800 x 160
Order no.
9161 - 003
Type designation
PAF-KHU/AFK 120x80x16
colour
lightgrey
weight
kg
18
Pallet PAF-K, plastic
capacity
kg
850
Pallet PAF-K of plasticAvailable in many versions for variety of use.
Crated pallet PAG-EBase frame and crate framework of tightly welded square-tubes, stainless steel 1.4301. Crate bars of tightly welded round tubing, stainless steel 1.4301. 3 walls permanently welded, one longitudinal side is removable. Pallet has 4 sturdy feet and is approachable form all sides. Frame top with 4 stacking brackets. Load capacity details refer do the pallet bearing capacity when stacking and apply to evenly distributed load.
dimensions LxWxH
mm
1250 x 850 x 875
Order no.
3220-005
Type designation
PAG-E 125x85x87
Inner
height D m
700
weight
kg
48
Crated pallet PAG-E, steel
capacity
kg
1000
22
dimensions
L x W x H mm
600x400x125
600x400x200
600x400x300
colour
rdeèe oranžna
rdeèe oranžna
rdeèe oranžna
weight
kq
1,5
2,0
3,0
capacity
L
25
40
60
EURO-crate SKE
version
DIN 55423-E 1
DIN 55423-E 2
DIN 55423-E 3
Type designation
SKE 1-60 x 40 x 12
SKE 2-60 x 40 x 20
SKE 3-60 x 40 x 30
Order no.
9160-001
9160-002
9160-004
2
EURO crates in conformity with DIN 55423 - of non-regenerated polyethylene - resistant so washing plants - colour blood orange RAL 2002 cadmium-free (available BGA and LMBG as well) - UV-sstabilised - Temperature resistant (-40°C to +70°C)- Suitable for use on roller conveyors - Excellent cleaning features due to large radius avoid dead angles (outward draining of ribs as well) - Ergonomic handles and vent holes on all sides - Labelling space for variety of markings
Speedy merchandise transfer and handling - Same intechange system, as in EURO pallets anf meat hooks - No lenghty emptying of crates - No waiting period- Weight deviation in conformity with DIN max ± 1 - Environment-friendly handling prevents from package waste - Constant cost reduction due to reuse
Dolly SKR-E, steelDolly enables easy transport of EURO crates, also if they are stacked on top of one another. Complete of stainless steel. Loading area wuth raised edge on longitudinal sides, cross sides reinforced with square tubing and acting as limit stops. 6 polyamide wheels 0125 mm. Centre wheels raised, thus enabling pivot motion.
Versionmaterial
steel
steel
Order no.
3030-031
3030-022
Type designation
SKR-E 66x42x17/K 1
SKR-E 86x62x17/K 2
dimensions
LxWxH mm
660x420x175
860x620x175
Dolly SKR-E, steel
Loading area
No crates
1 pc
2 pcs
Dolly SKR - 4E3Version the same as SKR - E, but with three tiers for EURO crates E3. Tier spacing 350 and 250 mm. Dolly complete of stainless steel 1.4301.
Dolly SKR
dimensions AxBxC mm
664 x 470 x 1218
664 x 470 x 918
Order no.
3030-940
3030-941
Type designation
SKR-4E3
SKR-4E2
23
Palettes and boxes
colour
white
russet
green
black
gray
white
russet
green
black
gray
white
russet
green
black
gray
Order no.
0550-101
0550-103
0550-105
0550-106
0550-107
0550-111
0550-113
0550-115
0550-116
0550-117
0550-121
0550-123
0550-125
0550-126
0550-127
Type designation
RSW-WE 2/200
RSW-RB 2/200
RSW-GN 2/200
RSW-SW 2/200
RSW-GU 2/200
RSW-WE 3/200
RSW-RB 3/200
RSW-GN 3/200
RSW-SW 3/200
RSW-GU 3/200
RSW-WE 4/200
RSW-RB 4/200
RSW-GN 4/200
RSW-SW 4/200
RSW-GU 4/200
Polyethylene wall impact protection section RSW, 90 x 20 mm, length 2000 mm
Polyethylene wall impact protection section RSW, 90 x 30 mm, length 2000 mm
Polietilen stena zašèitni profil RSW, 90 x 40 mm, length 2000 mm
Impact protection railing RSGOf stainless steel 1.4301, brushed, with base plate for fixing to floor. Railing with additional cross bracing, ideal for protecting sliding doors.
Impact protection
Polyethylene wall impact protection section RSWConstructed of special plastic polyethylene, in three different thicknesses and seven atractive colours, top edge bevelled, direct wall mounting, indispensable everywhere where walls, sanwich units, doors and lifts, etc. need to be protected.
Impact protection railing RSP
dimensions L x H mm
1000 x 800
1500 x 800
2000 x 800
dimensions H mm
1000
pipe 0 mm
60
60
60
pipe 0 mm
108
Impact protection railing RSGType designation
RSG 100 x 80
RSG 150 x 80
RSG 200 x 80
Type designation
RSP 100
Order no.
7580 004
7580 005
7580 010
Order no.
7580-020
Corner protection rails ESStainless steel 1.4301, brushed, for tile- or screw-mounting, complete.
Corner protection rails ESS, 80 x 80 mm, screw-mounting
length mm
1500
1750
2000
1500
1750
2000
Corner protection rails ESA, 50 x 50 mm, tile-mounting Type designation
ESA 150
ESA 175
ESA 200
ESS 150
ESS 175
ESS 200
Order no.
7564-115
7564-117
7564-120
7564 315
7564 - 317
7564 - 320
CNS protective concrete systemStainless steel surface 1.4301 sheet thickness 2 mm, sanitary version, round, module construction with flat parts up to 6 m, inner and outer edges round, all parts filled with concrete. Sylicone cleft for permanently laminable construction cleft.
Extra: Separate final door elements with welded sliding rails for rose installation or appliance wires.
NIEROS stainless steel and concrete protection is specially designed for room, hallway and warehouse installation with large turnover. NIEROS protection for transport protectiion of inner and outer base.
24
3
Conveyor belt FBBase frame of U-sections with round tubular railing, rigidly bolted to the side sections. Stainless steel 1.4301. Polyethylene railing strips avalaible. Belt of non-skid plastic fabric. Available track widths: 450 or 650 mm. Adjusting screws for retightening the belt. Glide strips of polyethylene.Available on inquiry
Coneyor system driven by side gear motor. Mains connection: 400 V, 50 Hz Wattage: 0,37 kW For base support frame and ceiling mounting refer to conveyor system for heavy loads SRB.
Conveyor systems
Conveyor system for heavy loads SRBBase frame of U-sections with round tubular railing, rigidly bolted to the side sections, of stainless steel 1.4301. Polyethylene railing strips available. Rollers D=50 mm, of special impact-resistant plastic. Quill gear and ballbearing of steel. Roller width optional; 450 or 650 mm. Roller spacing D at roller length RL 450 mm = 165 mm and with roller width RL 650 mm = 110 mm. Available on inquiry.
Optional mounting:Base support frame of square tubing, stainless steel 1.4301. Conveyor system has adjustable plastic legs for high stability on uneven floors.
Ceiling suspension of round tubing with vertically adjustable eyebolts and U-sections. Stainless steel 1.4301.
Conveyor system for heavy loads SRBK, bend sectionBase frame and mounting the same as in SRB but: conical-shape rollers, inner radius 845 mm. Available on inquiry
V-belt conveyor system KRBBase frame and mounting the same as in SRB but: driven by gearmotor and V-belt. Backing rollers for regulating contact pressure. Adjusting screws for retightening the belt.Available on inquiry.Mains connection: 400V, 50 HzWattage: 0,55 kW
25
4
Weighing-batching system
Weighing system iz manufactured as an add-on, thus The electronic weighing presets and stores the recipe enabling precise adaption to the product flow. data and switches them on-line to the computing centre Weighing systems are suitable for use in all branches for material management or cost accounting. and manufacturing areasd. Rationalised batching is The weighing systems are constructed entirely of enhanced by a computer recipe weighing and 825 l stainless steel 1.4301stock bins as well.
- Belt of rubber, plastic or steel, with single or double Special conveyor belts- High load capacity, available in number of different driveversions - Suitable for all industry branches and manufacturing areas, leather-working and paper industry - Stainless steel 1.4301 or 1.4571 - Belt length up to 50 m - Belt width up to 3 m
26
Order no.
4550-022
4550-045
Capacity
cca. kg
225
450
Ham press
Dimensions
A x B x C
935 x 550 x 1520
1050 x 935 x 1800
Type
designation
PR-6 225
PR-G 450
5Ham presses
Ham press
The press improves and speeds up the maturing process of raw ham and enables optimal product shaping, thus enhancing portion control and reducing cutting losses. We supply the optimal model for any production size.
Ham press PR-G 225
Press is designed for pressing, maturing and thermic handling of ham, fat and other meat products. Filling capacity cca. 225 kg. Complete of stainless steel 1.4301. 7 tiers, spacing in-between tiers for simultaneous heating. Pressing plate management by means of coil spindle. 4 castors, 2 D150 mm, 2 D200 mm. With 7 containers.
Ham press PR-G 450
Press is designed for pressing, maturing and thermic handling of ham, fat and other meat products. Filling capacity cca. 450 kg. Complete of stainless steel 1.4301. 7 x 2 tiers, spacing in-between tiers for simultaneous heating. Pressing plate management by means of 2 coil spindles. 6 castors, 4 D150 mm, 2 D200 mm. With 14 containers.
27
Ham press PR-P 100 Frame structure, pressing frame and casing of stainless steel 1.4301. Pneumatic control system, adjustable pressure reduce valve, relief valve and 6 polyamide fixed castors. Centre wheels raised. Filling capacity cca. 100 kg.
Ham press PR-P 200 Frame structure, pressing frame and casing as in PR 100. Filling capacity cca. 200 kg.
Ham press PR-P 600 Frame structure, pressing frame and casing as in PR 100, but with casing with 4 removable mounts of stainless steel 1.4301. Filling capacity cca. 600 kg
Ham press PR-P 1000Casing, pressing frame and removable front elements with special locking mechanism of stainless steel 1.4301. Pneumatic unit with with controls, pressure regulator and double-acting cylinder. 6 legs, approachable from all sides. Filling capacity cca. 1000 kg.
Ham press PRType
designation
PR-P 100
PR-P 200
PR-P 600
PR-P 1000
Filling capacity
cca. kg
100
200
600
1000
dimensions
A x B x C
1000 x 490 x 895
1000 x 490 x 1170
1565 x 590 x 1760
1920 x 960 x 2185
Order no.
4550 - 010
4550 - 020
4550-060
4550 -100
Ham press PRFitting type
PR-P 100
PR-P 200
PR-P 600
PR-P 1000
Basic form -
version weight
30 dividing angles
7 intermediate plates
40 dividing angles
9 intermediate plates
150 dividing angles
15 dividing angles
16 intermediate plates
182 dividing angles
140 dividing angles
1 base plate
1 cover plate
Basic form -
weight
395 x 60 x 40
870 x 395 x 15
395 x 60 x 40
870 x 395 x 15
245 x 60 x 40
1390 x 60 x 40
1395 x 500 x 15
832 x 60 x 40
250 x 60 x 40
1390 x 826 x 30
1390 x 826 x 30
Type
designation
PRZ-PF 100
PRZ-PF 200
PRZ-PF 600
PRZ-PF 1000
Order no.
4550- 010- 001
4550- 020- 001
4550- 060- 001
4550- 100- 001
28
5Special mascinenery
Containers for food, sweeteners and pharmaceutical products
Containers are designed for spilled load storage and transport. Welded wing construction.
Container capacity of 300 to 1200 l. Floor inclination depends on filling material, cca from 30° to 45°. Shutter valve in conformity with DN 150 or DN 250, steel, contents can be stacked on top of one another. Special version allows lifting by crane. Inner seems completely welded. Seals food resistant. Steel 1.4571 or 1.4301.
Customized versions for special requests: - Wing construction of hollow tubes/profiles, replacable screw-mounted frame and construction. - wheels (polyamide, polyurethane, solid rubber, antistatic...)
Special containers-customized, for all branches
- Stainless steel 1.4301 or 1.4571NIEROS produces storage systems as well as liquid - Faceted, fulling or sanded surface handling, powder handling, granulate handling and
solid material handling systems.
29
Lift and tilt devices
NIEROS lift and tilt devices solve your charging and weighing problems
Use: - Meat-processing industry - Beverage industry - Food-processing industry - bakehouses- Pharmaceutical industry Lift and tilt devices are built with a load capacity of 50 to 300 kg and lift height up to 6 m. Devices are available with a range of lifting forks for standard trolleys, barrels or pharmaceutical containers.
- Adjustable height Devices are made of stainless steel 1.4301, faceted, - Right-hand or left-hand version fulling or sanded surface. Optimal conformity with - Complete with control panel safety standards and hygienic raquirements (e.g. motor - Automatic safety area protective housing, control panel for lifting and - Protective type IP 65 lowering; mast with protective tape).
Lift and tilt devices HKS-PH4
- Mast vertically revolvable - Container horizontally revolvable (at any height) - Height adjustment switch
Lift and tilt devices SVS, pneumatic or hydraulic - Available capacity up to 500 kg, lift height up to 1200 mm, stainless steel 1.4301, sanded surface.- For standard trolleys (DIN 9797), barrels or aggregate barrels - Hydraulic or pneumatic station right, left or in the front - Complete with control panel - Compressed air connection 6 bars - Undercarriage available on request - Two-grade version for low rooms
30
5
Fork-lift GHWDesigned for conveying pallets, salting containers and stacking containers, etc. Body and handle of stainless steel 1.4301. Hydraulic lift unit. 90° handle. Capacity 2500 kg. 2 tandem and 2 fixed castors of polyamide.
Fork litf GHW
dimensions
L x W x H mm
1480 x 520 x 1200
capacity
kg
2500
Fork
length D
1120
Lift
height mm
85-195
Type
designation
GHW-148x52x120 T 2500
Order
no.
9401 - 002
Clipper fork HPV 10
dimensions
L x W x H mm
1480 x 520 x 1200
capacity
kg
1000
Fork
length D
1120
Lift
height mm
800
Type
designation
HPV-10 800/1000
Order
no.
9401 - 004
Clipper fork-lift HPV 10 manual lifting Designed for conveying pallets, salting containers and stacking containers, etc. Body and handle of stainless steel 1.4301. Hydraulic lift unit. 90° handle. 2 tandem and 2 fixed castors of polyamide.Capacity 1000 kg, lift height 800 mm. Optional: HPV 10-OL: quick-type lift (loads up to 150
31
ISO 9001Q-132
NIEROS Metal,Tovarna opreme d.o.o.Gmajna 55SLO-2380 SLOVENJ GRADECTel.: ++386 (0)2 88-27-100Fax: ++386 (0)2 88-44-078e-mail: [email protected]://www.nieros.com