Semi-Finished Engineering Plastic Products.

TECAPEEK. The high-temperature plasticwith outstanding mechanical properties.

The hydrolysis resistance of TECAPEEKextends to over 200° C. TECAPEEK insulateselectrically even at high voltages.

Electrical engineering and medical technologyas well as mechanical engineering and aerospa-ce benefit from the outstanding load-bearingstrength of TECAPEEK

| Continuous operating temperature up to +260° C and briefly even up to + 300° C

| Outstanding mechanical properties even athigh temperatures

| Outstanding resistance to chemicals

| Hydrolysis resistance even above + 200° C

| Electrically insulating even with high volta-ges

| Excellent sliding properties

| Resistant to high-energy radiation

Gear wheelTECAPEEK:

Torque transmission,high-temperature

application, high sur-face loads.

Cam guideTECAPEEK PVX:

Automation and robo-tics, very good sliding

friction values, highresistance to chemi-

cals.

Transport pinionTECAPEEK MT:

Suitable for use withfoodstuffs, resistant to

sterilisation, dimensional-ly stable.

43

TECAPEEK

Continuous operating temperature

up to + 260° C. Outstanding mecha-

nical properties even at high tempe-

ratures.

TECAPEEK GF 30

Glassfibre-reinforced semi-finished

product with enhanced strength.

Excellent resistance to chemicals.

TECAPEEK CF 30 black

Very high strength values thanks to

the addition of carbon fibres. Enhan-

ced abrasion resistance.

TECAPEEK PVX black

Very good sliding and friction values.

Suitable for bearing parts subject to

high loads.

TECAPEEK MT black

Hydrolysis-resistant, autoclavable semi-

finished product with approvals for

medical technology.

TECAPEEK ELS

defined electrical conductivity, carbon

fibre reinforced providing high strength,

with approvals for use in semi-conductor

technology and the electronics industry.

TECAPEEK HT

very high abrasion and wear resistance,

high load-bearing capacity in static and

dynamic conditions, excellent chemical

resistance.

TECAPEEK TF 10

Very good sliding and friction propertics,

suitable for soft mating partners.

Electrically insulating.

TE

CA

PE

EK

44

TE

CA

PE

EK

*Also available in pigmented form.The specified kg/m weights are purely arithmetic figures.Weight on delivery will deviate from the figures givenabove. Stock lengths 3000 mm, other delivery lengthspossible, also available planed.All figures given without obligation.

= Stock item

= Non-stock item – special production

DIN-Abbreviation

Density (g/cm3)

Diameter

Ø mm

Tolerance TECAPEEK TECAPEEK TECAPEEK TECAPEEK TECAPEEK TECAPEEK TECAPEEK TECAPEEKto DIN GF 30 CF 30 PVX MT ELS TF 10 HTmm black black black* black

PEEK PEEK GF 30 PEEK CF 30 PEEK PEEK PEEK CF PEEK TF 10 PEK

1,32 1,49 1,44 1,48 1,32 1,44 1,35 1,32

kg/m kg/m kg/m kg/m kg/m kg/m kg/m kg/m

5

6

8

9

10

11

12

13

14

15

16

18

19

20

22

25

28

30

32

36

40

45

50

56

60

65

70

80

90

100

110

120

125

135

140

150

165

180

200

Rods

+0,5

+0,1

+0,4 0,029 0,032 0,031 0,032 0,029 0,031 0,029 0,029

+0,1 0,040 0,046 0,044 0,045 0,040 0,044 0,041 0,040

0,071 0,081 0,078 0,080 0,071 0,078 0,073 0,071+0,5

0,090 0,098 0,098 0,090+0,1

0,110 0,124 0,120 0,123 0,110 0,120 0,112 0,11

0,14 0,15 0,151 0,14

0,16 0,18 0,18 0,18 0,16 0,178 0,17 0,16

0,19 0,19

+0,9 0,22 0,22

+0,2 0,25 0,28 0,27 0,28 0,25 0,27 0,26 0,25

0,28 0,32 0,31 0,32 0,28 0,31 0,29 0,28

0,36 0,40 0,39 0,40 0,36 0,39 0,36 0,36

0,40 0,45 0,43 0,44 0,40 0,43 0,40

+1,1 +0,2 0,44 0,50 0,48 0,50 0,44 0,48 0,45 0,44

0,53 0,60 0,58 0,60 0,53 0,58 0,55 0,53

+1,2 0,68 0,77 0,75 0,77 0,68 0,75 0,70 0,68

+0,2 0,85 0,96 0,93 0,96 0,85 0,93 0,87 0,85

0,98 1,10 1,07 1,10 0,98 1,07 1,00 0,98

+1,3 1,11 1,26 1,21 1,25 1,11 1,21 1,14 1,11

+0,2 1,40 1,58 1,53 1,57 1,40 1,53 1,43 1,40

+1,5 +0,2 1,73 1,95 1,89 1,94 1,73 1,89 1,77 1,73

+1,7 2,19 2,39 2,46 2,19 2,39 2,19

+0,3 2,70 3,04 2,94 3,02 2,70 2,94 2,76 2,70

+2,0 +0,3 3,39 3,69 3,80 3,39 3,69 3,39

+2,3 3,90 4,40 4,25 4,37 3,90 4,25 3,98 3,90

+0,3 4,56 5,14 4,66 4,56

+2,5 +0,3 5,29 5,97 5,77 5,93 5,29 5,77 5,41 5,29

+3,0 +0,4 6,92 7,81 7,55 7,76 6,92 7,55 7,08 6,92

+3,4 +0,5 8,77 9,89 9,56 9,83 9,56 8,96 8,77

+3,8 +0,6 10,83 12,22 11,81 12,14 10,83 11,81 11,07 10,83

+4,2 +0,7 13,11 13,11 13,11

+4,6 15,61 15,61 15,61

+0,8 16,91 16,91 16,91

+5,4 19,79 19,79 19,79

+0,9 21,24 21,24

+5,8 +1,0 24,40 24,40 24,40

+6,3 +1,1 29,50

+7,4 +1,2 35,21

+8,5 +1,3 43,53

45

TE

CA

PE

EK

Plates

DIN-Abbreviation

Density (g/cm3)

Size

mm

Tolerance TECAPEEK TECAPEEK TECAPEEK TECAPEEK TECAPEEK TECAPEEK TECAPEEK TECAPEEKto DIN GF 30 CF 30 PVX MT ELS TF 10 HT(mm) black black black* black

PEEK PEEK GF 30 PEEK CF 30 PEEK PEEK PEEK CF PEEK TF 10 PEK

1,32 1,49 1,44 1,48 1,32 1,44 1,35 1,32

kg/m kg/m kg/m kg/m kg/m kg/m kg/m kg/m

*Also available in pigmented form.The specified kg/m weights are purely arithmetic figures.Weight on delivery will deviate from the figures givenabove. Stock lengths 3000 mm, other delivery lengthspossible, also available planed.All figures given without obligation.

= Stock item

= Non-stock item – special production

5 x 300

5 x 500

6 x 300

6 x 500

8 x 300

8 x 500

10 x 300

10 x 500

12 x 300

12 x 500

16 x 300

16 x 500

16 x 1000 **

18 x 500

20 x 300

20 x 500

20 x 1000 **

22 x 500

25 x 300

25 x 500

25 x 1000 **

30 x 300

30 x 500

30 x 1000 **

32 x 500

36 x 500

40 x 300

40 x 500

40 x 1000 **

45 x 500

50 x 300

50 x 500

60 x 300

60 x 500

70 x 300

80 x 300

80 x 500

100 x 300

2,27 2,54 2,27 2,27

+0,7 3,70

+0,2 2,68 3,03 3,01 2,68 2,74 3,70

- 4,38 4,95 4,78 4,92 4,38 4,78 4,48 2,68

3,56 4,01 3,99 3,56 3,64 4,38

+0,9 5,81 6,56 6,34 6,52 5,81 6,34 5,94 3,56

+0,2 4,39 4,95 4,92 4,39 4,49 5,81

7,17 8,10 7,82 8,04 7,17 7,82 7,33 4,39

5,36 6,05 6,01 5,36 5,49 7,17

8,77 9,90 9,57 9,83 8,77 9,57 8,97 5,36

7,03 7,93 7,88 7,03 7,19 8,77

11,49 12,97 12,53 12,88 11,49 12,53 11,75 7,03

22,31

+1,5 12,85 14,50 14,02 14,41 12,85 14,02 13,14 11,49

+0,3 8,69 9,81 9,74 8,69 8,89 12,85

14,21 16,04 15,50 15,93 14,21 15,50 14,53 8,69

27,59

15,57 17,57 16,98 17,45 15,57 16,98 15,92 14,21

10,77 12,16 12,07 10,77 11,01 15,57

17,61 19,87 19,21 19,74 17,61 19,21 18,01 10,77

34,19

13,10 14,78 14,69 13,10 13,40 17,61

21,41 24,17 23,36 24,01 21,41 23,36 21,90 13,10

41,38

22,77 25,71 25,53 22,77 23,29 21,41

25,49 22,77

+2,5 17,26 19,48 18,82 19,35 17,26 18,82 17,65 25,49

+0,5 28,21 31,85 30,78 31,63 28,21 28,85 17,26

54,78

31,61 35,68 35,44 31,61 30,78 32,33 28,21

21,41 24,17 23,36 24,01 21,41 23,36 21,90 31,61

35,01 39,52 38,19 39,25 35,01 38,19 35,81 21,41

+3,525,78 29,10 25,78 26,37 35,01

+0,542,15 47,26 42,15 25,78

29,94 33,79 30,62 42,15

+5,034,41 38,84 35,19

+0,554,62

42,72

46

TE

CA

PE

EK

= Outside

= Inside

The specified kg/m weights are purely arithmetic figures. Weight on delivery will deviate fromthe figures given above. Stock lengths 3000 mm, other delivery lengths possible, also availableground. All figures given without obligation.

= Stock item

= Non-stock item – special production

Tubes TECAPEEK

PEEK

1,32

DIN-Abbreviation

Density (g/cm3)

Tolerance to DINmm

DiameterØ (mm)

-0,3-3,0

-0,3-3,9

-0,3-5,0

-0,5-5,0

40

45

50

56

60

65

70

75

80

85

90

100

110

120

125

130

135

140

150

165

180

200

210

230

250

280

300

360

+2,5

+0,8

+3,6

+1,2

+4,5

+1,5

+5,4

+1,8

+3,0

+0,8

+6,0

+2,0

25 30 36 40 45 50 54 60 70 75

1,17

1,62

2,13 1,85 1,44

2,81 2,53 2,12 1,81

3,31 3,03 2,62 2,31

3,97 3,69 3,28 2,97 2,53

4,73 4,44 4,04 3,73 3,29 2,80

5,50 5,22 4,81 4,50 4,06 3,57 3,14

6,04 5,30 4,98 4,88 4,39 3,96 3,26

5,63 5,32 5,76 5,27 4,84 4,13

6,51 6,19 6,78 6,29 5,16 3,84

7,53 7,22 8,80 8,31 7,88 7,18 5,86 5,12

9,55 9,24 11,03 10,54 10,11 9,40 8,09 7,34

12,97 11,84 10,52 9,78

14,91 14,42 14,00 13,29 11,98 11,23 10,43

15,78 14,64 13,33 12,58

17,18 16,75 16,05 14,74

18,64 18,21 17,51 16,19

21,90 21,47 20,76 19,45

25 30 36 40 45 50 54 60 70 75

47

TE

CA

PE

EK

DiameterØ mm

Tolerance-2,5-8,5

-0,5-8,5

80 90 100 110 125 130 150 175 180 200 290

4,32

6,55 4,79

8,98 7,23 5,27

10,43 8,68 6,72

11,79 10,03 8,07

13,19 11,44 9,48 7,31

14,65 12,90 10,94 8,77

17,91 16,15 14,20 12,03 8,39 7,07 11,78

22,92 21,17 19,21 17,04 13,40 12,08 19,80

28,39 26,64 24,68 22,52 18,88 17,56 24,31

36,42 34,67 32,71 30,54 26,91 25,59 33,60 12,13

37,21 35,05 31,41 30,09 43,71 16,63

46,50 44,34 40,70 60,45 24,1 16,33

56,62 54,45 50,82 72,64 34,22 26,45

50,95 43,18

63,15 55,37

51,67

80 90 100 110 125 130 150 175 180 200 290

40

45

50

56

60

65

70

75

80

85

90

100

110

120

125

130

135

140

150

165

180

200

210

230

250

280

300

360

48

TE

CA

PE

EK = Outside

= Inside

The specified kg/m weights are purely arithmetic figures. Weight on delivery will deviate fromthe figures given above. Stock lengths 3000 mm, other delivery lengths possible, also availableground. All figures given without obligation.

= Stock item

= Non-stock item – special production

Tubes TECAPEEKPVXblack

PEEK

1,48

DIN-Abbreviation

Density (g/cm3)

Tolerance to DINmm

DiameterØ (mm)

-0,3-3,0

-0,3-3,9

-0,3-5,0

-0,5-5,0

-0,5-5,0

40

45

50

56

60

65

70

75

78

80

85

90

100

110

120

125

130

135

140

150

165

180

185

200

210

230

250

+2,5

+0,8

+3,6

+1,2

+4,5

+1,5

+5,4

+1,8

+3,0

+0,8

+6,0

+2,0

25 30 32 36 40 45 50 54 60 70

1,37

1,88

2,45 2,17 1,73

3,22 2,93 2,49

3,77 3,48 3,35 3,05 2,71

4,23 3,79 3,45 3,02

5,07 4,94 4,64 4,3 3,87 3,4

5,8 5,5 5,16 4,73 4,27 3,81

6,05 5,71 5,28 4,81

6,43 6,09 5,66 5,19 4,73 3,97

7,07 6,64 6,17 5,71 4,95

7,78 7,32 6,1 4,67

9,58 9,12 8,37 6,93

12,08 11,62 10,86 9,43

14,81 13,59 12,16

16,44 15,98 15,22 13,79

25 30 32 36 40 45 50 54 60 70

49

TE

CA

PE

EK

DiameterØ (mm)

Tolerance-2,5-8,5

-0,5-5,0

-0,5-5,8

-0,5-5,8

75 80 90 100 110 125 130 150 175 180 200

6,12 5,25

8,62 7,75 5,84

11,35 10,48 8,57 6,51

12,98 12,11 10,2 8,14

14,49 13,62 11,71 9,66

15,2 13,29 11,23 9,2

16,83 14,92 12,87 10,83

20,33 18,41 16,36 14,33 10,39 8,96

22,14 20,1 16,16 14,73

28,28 26,25 22,3 20,88 14,57

16,91

35,44 31,5 30,07 23,77 14,98

34,92 28,62

39,04 28,25 19,67

50,38 39,6 31,02

75 80 90 100 110 125 130 150 175 180 200

40

45

50

56

60

65

70

75

78

80

85

90

100

110

120

125

130

135

140

150

165

180

185

200

210

230

250

75

TE

CH

NIC

AL

DA

TA

TECAN

YL

TECARA

NA

BS

TECAFIN

EPE

TECAFIN

EPP

TECAFO

RMA

D

TECAFO

RMA

H

TECAD

UR

PET, PBT

TECAFIN

EPM

P

TECAN

AT

TECARIM

TECAM

ID11, 12

TECAM

ID46, 66

TECAM

ID6

TECAFLO

NPCTFE

TECAFLO

NPVD

F

TECAFLO

NETFE

TECAFLO

NPTFE

TECASO

NS

TECASO

NP

TECASO

NE

TECATRON

TECAPEI

TECAPEEK

TECAPEEK

HT

SINTIM

ID

VESPEL®

SP1

+ = Resistant (+) = Limited resistance - = Not resistant (also dependent on concentration, time and temperature)

Cupric sulphate 10% + + + + + + + + + + + + - + + + +

Linseed oil + + + + + + + + + + + + + + + + +

Methanol + + + (+) + + + + + + (+) + - + + + + + + (+) +

Methyl ethyl ketone + + + + + - (+) - + + (+) (+) + + + + - (+) + (+) + + + - -

Methylene chloride + - - - + + + (+) (+) (+) - - + - (+) (+) - (+) -

Milk + + + + + + + + + + + + + + + +

Lactic acid, aqueous solution 90% + + (+) + + - - (+) + + - + + - -

Lactic acid, aqueous solution 10% + + + + + + + + + + + + (+) + + + +

Sodium bisulphite, aqueous solution 10% + + + + + + + + + + + + + - - + + +

Sodium carbonate, aqueous solution 10% (+) + + + + + + + + + + + + + (+) + + + +

Sodium chloride, aqueous solution 10% + + + + + + + + + + + + + + + + + + + + + + + +

Sodium nitrate, aqueous solution 10% + + + + + + + + + + + + + +

Sodium thiosulphate 10% + + + + + + + + + + + +

Soda Iye, aqueous 50% - + + - + + + + + + + + - + - + - + + + +

Soda Iye, aqueous 5% (+) + + + + + + + + + + - + + - + + +

Nitrobenzene + - + + (+) (+) (+) - + (+) (+) + + -

Oxalic acid, aqueous solution 10% (+) + + + + + + + + (+) (+) + + + - (+) + + + +

Ozone 2) (+) + + + - - - - - - (+)

Paraffin oil + + + + + + + + + + + + + + + + + +

Perchlorethylene + - - + + (+) (+) - (+) (+) + + - - (+)

Petroleum + + + + + + + - + + + + + (+) +

Phenol, aqueous solution + + + + + - - - - + - - - + + (+)

Phosphoric acid, concentrated (+) + + + + + + + - - - - + + + +

Phosphoric acid, aqueous solution 10% - (+) + + + + + - - - - + + (+) - + +

Propanol + + + + + - + + + + + + + +

Pyridine - - - + + + + + + - (+) + (+) (+) (+) -

Pyridine 3 solution, aqueous solution + + + + - + -

Salicylc acid + + + + + + + + (+) +

Nitric acid, aqueous solution 2% + + + - + + + + + + + + - - - - - + + - - + + + -

Hydrochloric acid, aqueous solution 36% - + + + + (+) + + + - - - - + + - - - + + + +

Hydrochloric acid, aqueous solution 2% + + + + + + + + + + + - - (+) + + + - - + + + +

Sulphur dioxide + (+) + + + + + + - + + + + (+) -

Sulphuric acid, concentrated 98% - - - - - - + + (+) + - - - - - + - - - + (+) - -

Sulphuric acid, aqueous solution 2% + + + + + + + + + + + + - - - + + - + - + + + +

Hydrogen sulphide, saturated + + + + + + + (+) + - + + - +

Soap solution, aqueous solution - (+) + + + + + + + + + + + + + + +

Silicone oils + + + + + + + + + + + + + + + + +

Soda solution, aqueous solution 10% (+) + + + + + + + + + + + +

Edible fats, Edible oils + + + + + + + + + + + + + +

Styrene + + + + + + - + (+) (+) -

Tar + + + + + (+) (+) (+) + +

Carbon tetrachloride + + (+) + + + + + - + - + + (+) - - - -

Tetrahydrofurane + + + - + + + + + + + - - - (+) - (+) (+) -

Tetralin + + + + + - + + + - (+) -

Ink + + + + + + + + + + + +

Toluene + + + + (+) - (+) - + + + (+) + + + + - - (+) + + + (+) -

Transformer oil + + + + + + + + + + + (+) + + + (+) + +

Triethanolamine - + + + + + - + - + + +

Trichlorethylene + + + - - + + - (+) (+) (+) - - - - - (+) - - -

Trilon B, aqueous solution 10% + + + + +

Vaseline + + + + + + + + + + + + + + + (+) +

Wax, molten + + + + + + + + + + + + + + + + (+) (+) +

Water, cold + + + + + + + + + + + + + + + + + + + + + + + + +

Water, warm - + + - (+) (+) (+) + + + (+) (+) (+) (+) (+) + - (+) - + + + +

Hydrogen peroxide, aqueous solution 30% - (+) (+) + (+) + + + + - - - - + + - - + + +

Hydrogen peroxide, aqueous solution 0,5% + + + + + + + - - - - + + + (+) + + + +

Wine, Brandy + + + + + + + + + + + + + + + +

Tartaric acid + + + + + + + + + + (+) (+) + + + +

Xylene + + + + + (+) + - + + (+) + + (+) - - (+) + + - - - -

Zink chloride, aqueous solution 10% + + + + + + + + + + (+) (+) (+) + + - + + + +

TE

CH

NIC

AL

DA

TA

76

ENSINGER High-temperature plastics.Material standard values.

The information corresponds with current knowledge, and indicates our pro-ducts and possible applications. We cannot give you a legally binding guaran-tee of the physical properties or the suitability for a specific application. Existing commercial patents are to be taken into account. A definite qualityguarantee is given in our general conditions of sale.

Tests are carried out in a standard atmosphere of 23° C 50 RH according to DIN50 014.We reserve the right to make technical alterations.

SINTIMIDPI black 300 1,34 116 9 4000 4000 75 12 0,8

SINTIMID

PUR HT PUR HT

SINTIMIDPI CS 15 15% graphite, black 300 1,42 97 2,8 4000 4000 88(d) 26(i) 0,27

SINTIMID

15G 15G

SINTIMIDPI CS 40 40% graphite, black 300 1,57 65 2,2 80(d)

SINTIMID

40G 40G

SINTIMIDPI CS 15 TF 10

15% graphite, 10%300 1,48 77 2,9 85(d)

SINTIMID

PVX PTFE, black PVX

SINTIMIDPI PTFE 30 30% PTFE 260 1,51 82 4,1 84(d)

SINTIMID

30P 30P

SINTIMIDPTFE + PI Polyimid P84, brown 260 1,85 15 200 65(d)

SINTIMID

8000 8000

TECAPEEKPEK 260 1,3 2110 20 3800 4100 108(r) .

TECAPEEK

HT HT

TECAPEEK PEEK also in black** 260 1,32 95 25 3000 4100 M99 o. Br. 0,30-0,38 TECAPEEK

TECAPEEKPEEK GF 30 30% glass fibre 260 1,49 180 2,5 9500 10000 M103 60 36 0,38-0,46

TECAPEEK

GF 30 GF 30

TECAPEEKPEEK CF 30

30% carbon fibre,260 1,40 215 1,5 18500 20000 255 35

TECAPEEK

CF 30 black CF 30

TECAPEEKPEEK

10% carbon fibre,260 1,48 130 1,5 9500 8100 208 30 0,11

TECAPEEK

PVX PTFE, graphite, black PVX

TECAPEEKPEEK coloured 260 1,32 95 20 3000 4100 M99(r) o. Br. 0,30-0,38

TECAPEEK

MT MT

TECAPEEKPEEK black 260 1,32 95 20 3000 4100 M99(r) o. Br. 0,30-0,38

TECAPEEK

MT sw MT sw

TECAPEEKPEEK CF carbon fibre, black 260 1,44 175 1 15500 M105 30

TECAPEEK

ELS ELS

TECAPEEKPEEK TF 10 PTFE 260 1,35 80 15 3000 n. b.

TECAPEEK

TF 10 TF 10

TECAFLONPTFE 260 2,18 25 > 50 700 30 o. Br. 5 1,58 0,08-0,10 21

TECAFLON

PTFE PTFE

TECATRON PPS 230 1,35 75 4 3700 3600 190 50 TECATRON

TECATRONPPS black 230 1,35 75 4 3700 3600 190 50

TECATRON

MT sw MT sw

TECATRONPPS GF 40 40% glass fibre 230 1,65 185 1,9 14000 13000 320 45

TECATRON

GF 40 GF 40

TECATRONPPS

10% carbon fibre,230 1,54 115 1,5 10000 203 20 0,21 0,69

TECATRON

PVX PTFE, graphite, black PVX

TECASONPES translucent 180 1,37 90 40 2700 148 o. Br. 20

TECASON

E E

TECASONPPSU black 170 1,29 70 > 50 2350 2600 31 o.Br.(k)

TECASON

P P

TECASONPPSU black 170 1,29 70 > 50 2350 2600 31 o. Br.

TECASON

P MT sw P MT sw

TECAPEI PEI translucent 170 1,27 105 > 50 3200 3300 140 4 TECAPEI

TECAPEIPEI GF 30 30% glass fibre 170 1,51 165 2 9500 9000 165 40

TECAPEI

GF 30 GF 30

TECAPEIPEI coloured 170 1,27 105 3200 3300 140 4

TECAPEI

MT MT

TECASONPSU translucent 160 1,24 80 > 50 2600 147 o. Br. 42 22 0,4

TECASON

S S

TECAFLONE/TFE 150 1,73 45 40 800 60(d) o. Br. 0,4

TECAFLON

ETFE ETFE

TECAFLONPVDF 150 1,77 50 > 30 2000 2000 80 o. Br. 34 3 0,3

TECAFLON

PVDF PVDF

TECAFLONPVDF CF 8

8% carbon fibre,150 1,78 93 1 6000 6000 0,23

TECAFLON

PVDF CF 8 black PVDF CF 8

Servicetemperature°C long term

Works-nomenclature

Works-nomenclature

DIN-abbreviation

additivesand/orcolour

Mechanical properties

Den

sity

(ASTM

D 7

92, D

IN 5

3 47

9)

Tensi

le s

tren

gth a

t yi

eld

(ASTM

D 6

38, D

IN E

N IS

O 5

27)

Tensi

le s

tren

gth a

t bre

ak (A

STM

D 6

38,

DIN

EN

ISO

527

, ASTM

D 1

708

(a))

Elongat

ion a

t bre

ak (A

STM

D 6

38,

DIN

EN

ISO

527

, ASTM

D 1

708

(a))

Modulu

s of e

last

icity

afte

r te

nsile

tes

t

(ASTM

D 6

38, D

IN E

N IS

O 5

27)

Modulu

s of e

last

icity

afte

r fle

xura

l tes

t

(ASTM

D 7

90, D

IN E

N IS

O 1

78)

Cre

ep ruptu

re s

tren

gth a

fter

100

0 h

with s

tatic

load

Tim

e yi

eld li

mit fo

r 1%

elongat

ion a

fter

100

0 h

Coef

ficie

nt of f

rict

ion p

= 0

,05N

/mm

2 v =

0,6

m/s

on s

teel

, har

dend a

nd gro

und

Wea

r

(condit

ions

as p

revi

ous)

«1/1000MPa

Har

dness

(bal

l inden

tation: I

SO

203

9/1,

Shore

D: A

STM

D 2

240,

DIN

53

505

(d),

Rock

wel

l: ASTM

D 7

85 ,

ISO

203

9/2

(r),

other

s: A

STM

D 7

85 (a

), DIN

43

456

(s))

Impac

t re

sist

ance

(DIN

EN

ISO

179

, Izo

d: ASTM

D 2

56,

DIN

EN

ISO

180

(i),

Char

py: D

IN E

N IS

O 1

79 2

1 ,

notch im

pact st

rength

: DIN

53

456

(k))

«B/1000MPa

ankJ/m2

HKMPa

EBMPa

EZMPa

µ–

V

µ/km

ßR%

«RMPa

«SMPa

ªg/cm3

TE

CH

NIC

AL

DA

TA

77

Works-nomenclature

Works-nomenclature

Thermal properties Electrical properties** Miscellaneous data

Mel

ting p

oint

(DIN

53

736)

Gla

ss tra

nsition t

emper

ature

(DIN

53

736)

Hea

t dis

tort

ion t

emper

ature

after

ISO

-R 7

5, m

ethod A

(DIN

53

461)

Hea

t dis

tort

ion t

emper

ature

after

ISO

-R 7

5, m

ethod B

(DIN

53

461)

Max

imum

ser

vice

tem

perat

ure s

hort ter

m

Therm

al c

onductiv

ity

(23°

C)

Spec

ific

heat

(23°

C)

Coef

ficie

nt of l

inea

r th

erm

al e

xpan

sion

(23°

C, A

STM

D 6

96, D

IN 5

3 75

2, A

STM

E 8

31)

Die

lect

ric

const

ant (1

06 H

z,

ASTM

D 1

50, D

IN 5

3 48

3, IE

-250

)

Die

lect

ric

loss

fact

or (1

06 H

z,

ASTM

D 1

50, D

IN 5

3 48

3, IE

-250

)

Volu

me

resi

stan

ce

(ASTM

D 2

57, E

C 9

3, D

IN IE

C 6

0093

)

Surf

ace

resi

stan

ce

(ASTM

D 2

57, E

C 9

3, D

IN IE

C 6

0093

)

Die

lect

ric

stre

ngth (A

STM

D 1

49,

IEC-2

43, V

DE 0

303

part 2)

Res

ista

nce to t

rack

ing (D

IN 5

3 48

0,

VDE 0

303

part 1)

Mois

ture

abso

rption t

o equili

brium

23 °C/5

0% rel

ativ

e hum

idity

(DIN

EN

ISO

62)

Wat

er a

bsorp

tion a

t sa

tura

tion

(DIN

EN

ISO

62)

Res

ista

nce to h

ot w

ater

,

was

hing s

oda

Flam

mab

ility

acc

. to U

L

stan

dard 9

4

Res

ista

nce

to w

eath

erin

g**

Tm°C

Tg°C

HDT/A

°C

HDT/B

°C °C

¦W/(K·m)

c

J/(g·K)

|10-5 1/K

RON

ßr–

tan  –

ªDN · cm

EdkV/mm

Grade – – –W(H2O)

%

WS%

For VESPEL® see page 54.

Test specimen to DIN 53 455

** For materials where also in black is detailed under "additives and/orcolour” the electrical values do not apply to the black type.Additionally, the black variants are resistant to weathering.

+ = Resistant (+) = Limited resistance – = Not resistant(depending on concentration, time and temperature)

These values represents the average of a number of individual measurements.Unless otherwise stated the test results apply to injection moulded samples.

SINTIMID360-375 368 350 0,22 1,04 4,9 3,1 0,003 1017 1015 20 2,6 3,6 (+) V0 (+)

SINTIMID

PUR HT PUR HT

SINTIMID330 300 350 0,53 1,13 3,8 107 2,3 (+) V0 +

SINTIMID

15G 15G

SINTIMID330 350 3,1 V0

SINTIMID

40G 40G

SINTIMID330 350 2,5 4x1011

SINTIMID

PVX PVX

SINTIMID330 350 5 V0

SINTIMID

30P 30P

SINTIMID327 -20 327 0,25 1 2,3 1018

SINTIMID

8000 8000

TECAPEEK374 157 165 5,7 3,3 0,0035 1016 V0 -

TECAPEEK

HT HT

TECAPEEK 343 143 140 182 300 0,25 0,32 5,0 3,2-3,30,001-

1016 1015 20 0,1 0,5 + V0 - TECAPEEK0,004

TECAPEEK343 143 315 300 0,43 2,0 0,004 7x105 3x106 24,5 0,1 0,1 + V0 -

TECAPEEK

GF 30 GF 30

TECAPEEK343 143 315 300 0,92 1,5 1015 1015 0,1 0,1 + V0 +

TECAPEEK

CF 30 CF 30

TECAPEEK343 143 277 300 0,24 2,2 3x105 5x106 0,1 0,1 + V0 +

TECAPEEK

PVX PVX

TECAPEEK343 143 140 182 300 0,25 0,32 5,0 3,2-3,3

0,001-1016 1015 20 0,1 0,5 + V0 -

TECAPEEK

MT 0,004 MT

TECAPEEK343 143 140 182 300 0,25 0,32 5,0 3,2-3,3

0,001-3x105 5x106 20 0,1 0,5 + V0 -

TECAPEEK

MT sw 0,004 MT sw

TECAPEEK343 143 300 0,29 1,5 103 102 0,1 0,2 + V0 -

TECAPEEK

ELS ELS

TECAPEEK300 143 300 0,1 + V0 -

TECAPEEK

TF 10 TF 10

TECAFLON327 -20 55 121 260 0,25 1 12 2,1 0,0002 1016 1016 48

KA 3c< 0,05 + V0 +

TECAFLON

PTFE KB>600 PTFE

TECATRON 280 90 110 260 0,25 5 1013 1015 0,01 + V0 - TECATRON

TECATRON280 90 110 260 0,25 5 1013 1015 0,01 + V0 +

TECATRON

MT sw MT sw

TECATRON280 90 260 260 0,25 1,18 ca. 3 4 0,004 1013 1015 20 KC 175 0,02 1 + V0 -

TECATRON

GF 40 GF 40

TECATRON280 90 260 3-4 4x105 1x106 0,02 + V0 +

TECATRON

PVX PVX

TECASON225 204 214 220 0,18 1,12 5,5 3,5 0,005 1016 1014 40 0,7 2,1 + V0 -

TECASON

E E

TECASON220 207 214 190 0,35 5,6 3,45 1015 1013 15 0,37 1,1 + V0 -

TECASON

P P

TECASON220 207 214 190 0,35 5,6 3,45 1015 1015 15 0,37 1,1 + V0 -

TECASON

P MT sw P MT sw

TECAPEI 217 180 200 200 0,22 5 3,15 0,001 1015 1015 33 0,27 1,25 + V0 - TECAPEI

TECAPEI217 210 215 200 0,23 2 3,7 0,007 1015 1015 30 0,5 0,9 + V0 -

TECAPEI

GF 30 GF 30

TECAPEI217 180 200 200 0,22 5 3,15 0,001 1015 1015 33 0,7 1,25 + V0 -

TECAPEI

MT MT

TECASON188 180 169 181 180 0,25 1 5,5 3,1 0,005 1016 1014 42

KA1KB 0,2 0,8 + V0 -

TECASON

S 175 S

TECAFLON267 -100 71 105 150 0,24 0,9 13 2,6 0,001 >1016 > 1016 <0,05 0,03 + V0 +

TECAFLON

ETFE ETFE

TECAFLON172 -18 95 140 150 0,11 1,2 13 8 0,06 1014 1013 17*/150 KA 1 <0,05 <0,05 + V0 +

TECAFLON

PVDF PVDF

TECAFLON172 -18 150 3,6 0,04 + V0 +

TECAFLON

PVDF CF 8 PVDF CF 8