Katalog Fena Eng All
-
Upload
suphi-yueksel -
Category
Documents
-
view
247 -
download
0
Transcript of Katalog Fena Eng All
-
7/28/2019 Katalog Fena Eng All
1/62
TABLE OF CONTENTS page
Quality Management System and Quality Policy 3
vCOUPLINGSCoupling Selection Guidelines
5
Return fax 6
ASRFlexible Couplings 7- ASRX with enlarged hub
- ASRT with collets
ASN Flexible Couplings 11
- ASNY with replaceable pad without widening the pins
- ASG double- ATB with brake drum
- ASD with brake disc
ASP Rubber Bush Couplings 19
-ATPwith brake drum
-ATTwith brake disc
SEKFlexible Couplings 23
SETT Highly-Flexible Couplings 24
APMX Overload Couplings 26
ASM Rubber Membrane Couplings 27
ASO Tyre Couplings 31
- ASOT with collets
AMB Steel Membrane Couplings 33
-
7/28/2019 Katalog Fena Eng All
2/62
AUKBow Couplings 37
ASL Clamp Couplings 83
ASKFlange Couplings 39
vBRAKES
AHH Shoe Brakes 40
- AHG for mining
AHM Shoe Brakes 44
ATZ Disc Brakes 46
v
CASES AND HOUSINGS
AKO-2, AKO-4 Flange Cases 48
AKN Block Cases 05
AKD-2, AKD-4 Non-Block Cases 51
SN Block Housings of Rolling Bearings 35
vOTHER PRODUCTS
OEZWS-2 Flameproof Electromagnetic Locks of Shaft Gates59
-
7/28/2019 Katalog Fena Eng All
3/62
Dear Ladies and Gentlemen,
The trust of our customers won during
long-term operations of Fabryka Elementw
Napdowych FENA is the premium asset for
us. This trust is based notably upon the
high quality of our products, professional
customer service and the offer customised
to the users needs.
The ever growing market demands have
forced us to improve our quality
continuously. It has also become more and
more important to put a strong focus on
environmental issues.
While making efforts to achieve these
goals, we have implemented the IntegratedQuality Management and Environmental
Management System acc. to PN-EN ISO
9001: 2001 and PN-EN ISO 14001:2005.
The certificates awarded by a certifying
body of RW TV prove the efficiency of
Fabryka Elementw Napdowych FENAs
operations related to quality improvement
and environmental protection.
PRESIDENT OF MANAGEMENT BOARDJan Rdest
Fabryka Elementw Napdowych FENA Sp. z o.o.
-
7/28/2019 Katalog Fena Eng All
4/62
QUALITY AND ENVIRONMENTAL MANAGEMENT POLICY
The core goal of Fabryka Elementw Napdowych FENAs operations sincethe start has been to satisfy the demands and requirements of our customersin the most efficient manner and to provide advice and offer experience for
the clutches, brakes and other machine construction parts offered.We have made the quality a focal point of our operations to meet the
growing customer demands. We are aware that it is crucial for ensuringcustomer satisfaction and, therefore, for our success, development andmarket position. We are therefore constantly improving our quality to becapable of meeting our customer requirements more effectively and thus tostrengthen their confidence in the products we offer.
Considering that we are a company originating from the intenselyindustrialised region of Upper Silesia, environmental issues are of particularsignificance to us.
While caring for the environment, especially the closest surroundings, we
undertake to meet the appropriate legal requirements and also aim atreducing our environmental impact through the continuous improvement oftechnologies and production flow as well as pollution prevention.
We are fulfilling the goals of our Policy through the following actions:
implementing, maintaining and improving continually the IntegratedQuality Management and Environmental Management System accordingto PN-EN ISO 9001:2001 and PN-EN ISO 14001:2005,
selecting the qualified staff and improving their skills,
formulating the belief that each company employee is responsible for
quality and environmental impact,cooperating with customers based on trust and mutual benefits,
monitoring the customers needs and prospect requirements,
selecting the suppliers appropriately to ensure the satisfaction of qualityand environmental requirements,
improving constantly the processes pursued and products manufacturedso that are operations are environment-friendly,
The Management Board of Fabryka Elementw Napdowych FENA ensuresthat the undertakings of the Quality and Environmental Management Policyare being followed at all our corporate level and areas.
Katowice, 02.05.2006
PRESIDENT OF MANAGEMENT BOARD,
Jan Rdest
-
7/28/2019 Katalog Fena Eng All
5/62
Fabryka Elementw NapdowychFENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48 (0)32 245 1755; +48 (0)32 245 1715, e-mail: [email protected]
COUPLING SELECTION GUIDELINES 06.2006
To choose the coupling for power transmission, one has to verify whether the value of thetransmitted torque including the overload factor is lower than the nominal coupling torque (Mn).
Mn nztpzn KKKKM r
Mn coupling nominal torque [Nm]
Mzn power transmission (engine, motor) nominal torque [Nm]
Kp overload factor according to working machine type
Kt overload factor according to ambient temperature
Kz overload factor according to working time
Kn overload factor according to the number of starts
Mzn =
n
N9550
N - power [kW]
n rotational speed [rev./min.]
Kp Overload Factor
Power transmission type
Working machine type
electric motor,
steam turbine
water turbine,
4-6 cylinderengine
1-3 cylinderengine
Uniform motion without mass acceleration, impeller pumps,generating sets, fans.
1,2 1,6 1,8
Uniform motion with low mass accelerations, belt conveyors,fluid stirrers, textile machines, bucket conveyors, blowers,overhead cranes.
1,5 1,82,0
Uniform motion with average mass accelerations, piston pumps,rotary furnaces, impeller pumps with contaminated fluid, lifts,hook overhead cranes, cutting machines.
1,75 2,0 2,3
Uniform motion with average mass accelerations with strokes,concrete mixers, drop weights, mining fans, scraper conveyors,ball mills, light roller tables, grab overhead cranes.
2,0 2,3 2,6
Uniform motion with high mass accelerations with strongstrokes, excavators, vibrators, forge presses, grab cranes.
2,3 2,6 3,0
Uniform motion with particularly high mass accelerations with
strong strokes, compressors and piston pumps, heavy rollertables, welders, trolling mills, crushers, frame sawing machines.
2,6 3,0 3,5
Kt factor
temperature [C]Flexible elementmaterial -40 to -20 -20 to 0 0 to 40 40 to 60 60 to 80
polyurethane 1,1 1 1 1 1,2 1,4 1,4 1,8
3,12,11,111,11,1rebbur
Kz factor
61>61880610808
-
7/28/2019 Katalog Fena Eng All
6/62
Fabryka Elementw NapdowychFENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48 (0)32 245 1755; +48 (0)32 245 1715, e-mail: [email protected]
RETURN FAXTo receive offer for products you are interested in, send back this fax to: +48 (0)32 245 17 55 or any other no. given above
03.2004
I would like to receive information on:
Couplings Brakes Bearing cases Housings of rolling bearingsOffer according to data given below
Coupling selection form:
DIMENSIONS: d1= . . . . . . . [mm]
l1= . . . . . . . [mm]
b1= . . . . . . . [mm]
w1= . . . . . . . [mm]
d2= . . . . . . . [mm]
l2= . . . . . . . [mm]
b2= . . . . . . . [mm]
w2= . . . . . . . [mm]
L= . . . . . . . [mm]
D= . . . . . . . [mm] - maximum coupling outer diameter, if limited
POWER TRANSMISSIONPARAMETERS:
engine/motor power N=. . . . . . . . . [kW]
revolutions n=. . . . . . . . [rev./min]
Engine/motor:: motor engine (no. of cylinders. . . . . )
working machine type: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
transmission ratio i =. . . . . . . .(when choosing a coupling for engaging the transmissionslow-running shaft with the working machine)
ambient temperature of the coupling in operation [C]:
80
stops per hour:
160 working hours per day:
16
Note: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Company name and address:
Name and surname:
Departament:
:liam-e:xaF:enohP
transmission site
-
7/28/2019 Katalog Fena Eng All
7/62
Fabryka Elementw Napdowych FENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
ASR FLEXIBLE COUPLINGS
Example of designation of the ASR type coupling with the nominal torque of Mn=265 Nm, hub holesdiameters of d1=32 mm, d2=40mm, hub holes lengths of l1=50 mm, l2=80 mm, size of 003:
265-32/50-40/80- 003 ASR Flexible Couplingthe version with set screws (WD version):265-32/50-40/80- 003 ASR-WD Flexible Coupling
Prod. Sheet No.
5 ASR
03.2004
d1, d2 l1, l22) maximum
deviations 4)Nominal
torqueMn initial1) max nomin. extend.
f D d3x y A
Max
rotationalspeed nmax
Moment
of interia3)
I
Weight3)
m
Coupling
sizeand type
mmmN stop 1/min kgm2
kg -
10 4 19 25 40 16 40 16 1,2 0,4 0,5 11500 0,00008 0,36 0002 ASR
35 6 24 30 50 18 55 27 1,4 0,5 0,5 10000 0,0002 0,60 0001 ASR
95 8 28 35 60 20 65 30 1,5 0,8 1,0 9000 0,0005 0,91 001 ASR
190 10 38 45 80 24 80 38 1,8 0,8 1,0 7100 0,001 1,79 002 ASR
265 12 42 50 80 26 95 46 2,0 0,8 1,0 6000 0,003 2,62 003 ASR
310 14 48 56 80 28 105 51 2,1 0,8 1,0 5300 0,005 3,68 004 ASR
410 16 55 65 90 30 120 60 2,2 1,0 1,3 4750 0,010 5,42 005 ASR
625 18 65 75 110 35 135 68 2,6 1,0 1,3 4250 0,019 8,10 006 ASR
975 22 75 85 140 40 160 80 3,0 1,0 1,3 3550 0,043 13,29 007 ASR
2400 26 100 100 140 45 200 100 3,4 1,0 1,3 2800 0,138 26,12 008 ASR
We produce splineways as recommended, normally acc. to PN-70/M-85005, with the Js9 tolerance.Material - steel, polyurethane (elastic pad)1)
Designation of the coupling with lead holes (ow) acc. to the table, other parameters as in the example given above:265-ow/50- ow/80- 003 ASR Flexible Coupling (no WD version in the version with lead holes)
2)On request, we produce couplings with hub lengths different than the nominal and extended lengths provided in the table.
3)The weight and the moment of inertia have been determined for the coupling with the maximum hole without a splineway.
4)The recommended deviations up to 10% of the maximum deviation value
Applications: pumps; fans; belt and roller conveyors; cranes; stirrers; other machinery and equipment.
Elastic pad working conditions: work in the environment with pH of 512 at temperature of -30o to +80o(temporarily up to +100o).Resistance to chemicals, including: common solvents, fuels, oils and lubricants, sulphuric and hydrochloric acid, soda lye, saltywater and many other chemical substances.
We are also offering tailor-made special versions.
-
7/28/2019 Katalog Fena Eng All
8/62
Fabryka Elementw Napdowych FENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
ASRX FLEXIBLE COUPLINGSwith enlarged hub
Example of designation of the ASRX type coupling with the nominal torque of Mn=265 Nm, hub holes
diameters of d1=32 mm, d2=40mm, hub holes lengths of l1=50 mm, l2=80 mm, size of 003:265-32/50-40/80- 003 ASRX Flexible Coupling
the version with set screws (WD version):
265-32/50-40/80- 003 ASRX-WD Flexible Coupling
Prod. sheet No.
30 ASRX
03.2004
d1, d2 l1, l2 2) Maximumdeviations4) MaxrotationalNominaltorque
Mn initial1) max nomin. extend.f D D1 d3
x y A speed nmax
Momentof interia3)
I
Weight3)
m
Couplingsizeand type
mmmN stop 1/min kgm2
kg -
10 4 22 25 40 16 40 38 16 1,2 0,4 0,5 11500 0,00009 0,38 0002 ASRX
35 6 32 30 50 18 55 53 27 1,4 0,5 0,5 10000 0,0004 0,88 0001 ASRX
95 8 35 35 60 20 65 63 30 1,5 0,8 1,0 9000 0,0009 1,36 001 ASRX
190 10 48 45 80 24 80 78 38 1,8 0,8 1,0 7100 0,003 2,60 002 ASRX
265 12 55 50 80 26 95 93 46 2,0 0,8 1,0 6000 0,006 4,09 003 ASRX
310 14 60 56 80 28 105 103 51 2,1 0,8 1,0 5300 0,010 5,55 004 ASRX
410 16 70 65 90 30 120 118 60 2,2 1,0 1,3 4750 0,020 8,21 005 ASRX
625 18 75 75 110 35 135 133 68 2,6 1,0 1,3 4250 0,037 12,58 006 ASRX
975 22 90 85 140 40 160 158 80 3,0 1,0 1,3 3550 0,082 19,68 007 ASRX
2400 26 120 100 140 45 200 198 100 3,4 1,0 1,3 2800 0,231 34,46 008 ASRX
We produce splineways as recommended, normally acc. to PN-70/M-85005, with the Js9 tolerance.Material - steel, polyurethane (elastic pad)1)
Designation of the clutch with lead holes (ow) acc. to the table, other parameters as in the example of the designation above:265-ow/50- ow/80- 003 ASRX Flexible Coupling (no WD version in the version with lead holes)
2)On request, we produce couplings with hub lengths different than the nominal and extended lengths provided in the table.
3)The weight and the moment of inertia have been determined for the coupling with the maximum hole without a splineway.
4)The recommended deviations up to 10% of the maximum deviation value.
Applications: pumps; fans; belt and roller conveyors; cranes; stirrers; other machinery and equipment.
Elastic pad working conditions: work in the environment with pH of 512 at temperature of -30o to +80o(temporarily up to +100o).Resistance to chemicals, including: common solvents, fuels, oils and lubricants, sulphuric and hydrochloric acid, soda lye, saltywater and many other chemical substances.
We are also offering tailor-made special versions.
only in WD version
-
7/28/2019 Katalog Fena Eng All
9/62
Fabryka Elementw Napdowych FENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
ASRT FLEXIBLE COUPLINGSwith clamping bushes
Example of designation of the ASRT type coupling with the nominal torque of Mn=265 Nm, with the TZouter clamping bush with d1=38 mm hole and the TZ inner bush with d2=30 mm hole, size 003:
265-38TZ-30TW- 003 ASRT Flexible Coupling
Prod. sheet No.
45 ASRT
03.2004
hub with TW bush hub with TZ bush
d1, d2 l1, l2 d1, d2
Nominaltorque
Mn min max min maxl1, l2 f D D1 d3
Maxrotational
speed nmax
Momentof interia4)
I
Weight)4
m
Couplingsize
and typemmmN 1/min kgm
2kg -
35 25 11 23 25 11 23 18 55 53 27 10000 0,0003 0,75 0001ASRT
95 281)
11 23 281)
11 23 20 65 63 30 9000 0,0007 1,11 001 ASRT
190 322)
11 26 322)
11 26 24 80 78 38 7100 0,002 1,96 002 ASRT
265 423)
14 26 423)
14 26 26 95 93 46 6000 0,004 2,74 003 ASRT
310 423)
14 26 423)
14 26 28 105 103 51 5300 0,006 3,52 004 ASRT
410 50 19 33 50 19 33 30 120 118 60 4750 0,012 5,56 005 ASRT
625 50 19 33 60 24 45 35 135 133 68 4250 0,023 8,43 006 ASRT
975 60 24 45 75 30 52 40 160 158 80 3550 0,054 14,17 007 ASRT
2400 75 30 52 90 35 90 45 200 198 100 2800 0,187 31,82 008 ASRT
Material - steel (cast iron-some size of collets), polyurethane (elastic pad)We produce splineways as recommended, normally acc. to PN-70/M-85005, with the Js9 tolerance see note
1),2)
,3)
1)The reduced hole height of t2=2.3 mm (standard is t2=3.3 mm, marking acc. to PN-70/M-85005) forF28 hole
2)The reduced hole height of t2=2.3 mm (standard is t2=3.3 mm, marking acc. to PN-70/M-85005) forF32 hole
3)The reduced hole height of t2=2.3 mm (standard is t2=3.3 mm, marking acc. to PN-70/M-85005) forF40-F42 hole
4)The weight and the moment of inertia have been determined for the clutch with the maximum hole without a splineway with oneTW bush and one TZ bush.
Applications: pumps; fans; belt and roller conveyors; cranes; stirrers; other machinery and equipment.The clamping bushes enable easy installation and dismounting of the coupling without having to utilise specialist tools, e.g.turnbuckles or heaters, etc. (only hexagonal key is needed). You just install the coupling (after sliding it onto the sleeve pin andhub) by tightening or loosening two (three) bolts or screws tightening the coupling hub on the set sleeve and pin. The bush ismade with splineway and with an appropriate loose hole, accommodated to the pin diameter.
Elastic pad working conditions: work in the environment with pH of 512 at temperature of -30 o to +80o(temporarily up to +100o).Resistance to chemicals, including: common solvents, fuels, oils and lubricants, sulphuric and hydrochloric acid, soda lye, salty
water and many other chemical substances.The ASRT coupling hub may be juxtaposed with the ASR, ASRX hubs in any way thus forming the complete coupling.
We are also offering tailor-made special versions.
outer clamping bush TZ
inner clamping bush TW
-
7/28/2019 Katalog Fena Eng All
10/62
MAXIMUM DEVIATIONS
0001 ASRT 001 ASRT 002 ASRT 003 ASRT 004 ASRT 005 ASRT 006 ASRT 007 ASRT 008 ASRT
x mm 1,4 1,5 1,8 2,0 2,1 2,2 2,6 3,0 3,4
y mm 0,5 0,8 0,8 0,8 0,8 1,0 1,0 1,0 1,0
A stop. 0,5 1,0 1,0 1,0 1,0 1,3 1,3 1,3 1,3
The recommended deviations up to 10% of the maximum deviation value
10
-
7/28/2019 Katalog Fena Eng All
11/62
Fabryka Elementw Napdowych FENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
ASN FLEXIBLE COUPLINGSProd. Sheet No.
3 ASNExample of designation ASN type coupling with the nominal torque of Mn=100 Nm, hub hole diametersof d1=32 mm and d2=40mm, hub hole lengths of l1=45 mm and l2=80 mm, and size of 003:
100-32/45-40/80- 003 ASN Flexible Coupling 03.2004
d1, d2 l1, l22)
maximumdeviations
4)Nominaltorque
Mn initial1) max nomin. extend. f D d3 x y A
Maxrotational
speed nmax
Momentof interia
3)
I
Weight3)
m
Couplingsize
and type
mmmN stop 1/min kgm2
kg -
70 8 32 40 60 23 75 26 2,0 0,8 1,0 9000 0,0009 1,29 002 ASN100 10 40 45 80 24 85 36 2,5 0,8 1,0 9000 0,002 1,84 003 ASN
170 10 42 50 80 27 105 44 2,5 0,8 1,0 7100 0,004 3,11 004 ASN
300 12 55 56 80 33 125 55 3,0 1,0 1,5 6000 0,010 5,30 005 ASN
500 16 65 63 90 39 145 64 3,0 1,0 1,5 5200 0,020 7,47 006 ASN
800 20 80 75 110 41 175 87 3,0 1,0 1,5 3000 0,048 12,6 007 ASN
1400 22 90 100 140 48 200 100 3,5 1,8 1,5 2750 0,099 20,6 008 ASN
2100 26 100 110 140 50 230 115 3,5 1,8 1,5 2500 0,18 28,6 009 ASN
3400 28 120 120 170 60 260 140 4,0 2,2 1,5 2500 0,37 43,8 010 ASN
5000 30 130 130 170 67 300 155 4,5 2,2 1,5 2250 0,70 64,6 011 ASN
8300 30 140 165 210 73 360 210 5,5 2,2 1,5 2000 1,48 98,1 012 ASN
11400 30 150 175 210 73 400 252 6,5 2,2 1,5 1600 2,31 125,1 013 ASN
We produce splineways as recommended, normally acc. to PN-70/M-85005, with the Js9 tolerance.
Material - steel, polyurethane (elastic pad)1) Designation of the coupling with lead holes (ow) acc. to the table, other parameters as in the example given above:100-ow/45- ow/80- 003 ASN Flexible Coupling
2)On request, we produce couplings with hub lengths different than the nominal and extended lengths provided in the table.
3)The weight and the moment of inertia have been determined for the coupling with the maximum hole without a splineway.
4)The recommended deviations up to 10% of the maximum deviation value.
Applications: fans; belt and roller conveyors; cranes; stirrers; other machinery and equipment.
Elastic pad working conditions: work in the environment with pH of 512 at temperature of -30o to +80o(temporarily up to +100o).Resistance to chemicals, including: common solvents, fuels, oils and lubricants, sulphuric and hydrochloric acid, soda lye, saltywater and many other chemical substances.
We are also offering tailor-made special versions.
11
-
7/28/2019 Katalog Fena Eng All
12/62
Fabryka Elementw Napdowych FENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
ASN FLEXIBLE COUPLINGS special versions
The examples of special versions of the ASN flexible couplings (product sheet No. 3 ASN):
KK with two flanges
KZ and KW - with single flange
WP with countershaft
The solutions may be subject to any further modifications according to the Customersrequirements and do not restrict any other constructional modifications to the ASN coupling.
Prod. Sheet No.
3 ASN/SP1
03.2004
12
-
7/28/2019 Katalog Fena Eng All
13/62
Fabryka Elementw Napdowych FENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
ASN FLEXIBLE COUPLINGS special versions with bearing
The examples of special versions of the ASN flexible coupling (product sheet No. 3 ASN):
L with bearing
LKK with bearing and two flanges
LKZ - with bearing and single flange
LWP - with bearing and countershaft
The solutions may be subject to any further modifications according to the Customersrequirements and do not restrict any other constructional modifications to the ASN coupling.
Prod. sheet No.
3 ASN/SP2
03.2004
1
-
7/28/2019 Katalog Fena Eng All
14/62
Fabryka Elementw Napdowych FENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
ASNY FLEXIBLE COUPLINGSwith replaceable pad without widening the pins
Example of designation of the ASNY type coupling with the nominal torque of Mn=100 Nm, hub holes
diameters of d1=32 mm, d2=36mm, hub holes lengths of l1=45 mm, l2=80 mm, size of 003:100-32/45-36/80- 003 ASNY Flexible Coupling
Prod. sheet No.
37 ASNY03.2004
d1, d2 l1, l22) maximum
deviations4)
Nominaltorque
Mn initial1) max nomin. extend. f D x y A
Maxrotational
speed nmax
Moment ofinteria
3)
I
Weight3)
m
Couplingsize
and type
mmmN stop 1/min kgm2 kg -
70 8 26 40 60 40 75 2,0 0,8 1,0 9000 0,0018 2,7 002 ASNY
100 10 36 45 80 42 85 2,5 0,8 1,0 9000 0,0025 3,6 003 ASNY
170 12 42 50 80 50 105 2,5 0,8 1,0 7100 0,0054 5,1 004 ASNY
300 18 55 56 80 58 125 3,0 1,0 1,5 6000 0,013 7,4 005 ASNY
500 20 64 63 90 64 145 3,0 1,0 1,5 5200 0,028 11,4 006 ASNY
800 26 80 75 110 70 175 3,0 1,0 1,5 3000 0,063 17,2 007 ASNY
1400 28 90 100 140 75 200 3,5 1,8 1,5 2750 0,15 33,4 008 ASNY
2100 32 100 110 140 80 230 3,5 1,8 1,5 2500 0,24 49,1 009 ASNY
3400 38 120 120 170 95 260 4,0 2,2 1,5 2500 0,49 74,2 010 ASNY
5000 42 130 130 170 105 300 4,5 2,2 1,5 2250 0,87 101 011 ASNY
8300 48 140 165 210 125 360 5,5 2,2 1,5 2000 1,76 158 012 ASNY
11400 55 150 175 210 125 400 6,5 2,2 1,5 1600 2,41 185 013 ASNY
We produce splineways as recommended, normally acc. to PN-70/M-85005, with the Js9 tolerance.Material - steel, polyurethane (elastic pad)1)
Designation of the coupling with lead holes (ow) acc. to the table, other parameters as in the example given above:100-ow/45- ow/80- 003 ASNY Flexible Coupling
2)On request, we produce couplings with hub lengths different than the nominal and extended lengths provided in the table.
3)The weight and the moment of inertia have been determined for the coupling with the maximum hole without a splineway.
4)The recommended deviations up to 10% of the maximum deviation value
Applications: pumps; fans; belt and roller conveyors; cranes; stirrers; other machinery and equipment.
Elastic pad working conditions: work in the environment with pH of 512 at temperature of -30o to +80o(temporarily up to +100o).Resistance to chemicals, including: common solvents, fuels, oils and lubricants, sulphuric and hydrochloric acid, soda lye, saltywater and many other chemical substances.
We are also offering tailor-made special versions.
1
-
7/28/2019 Katalog Fena Eng All
15/62
Fabryka Elementw Napdowych FENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
ASG FLEXIBLE COUPLING
Example of designation of the ASG type coupling with the nominal torque of Mn=100 Nm, hub holesdiameters of d1=32 mm, d2=40mm, hub holes lengths of l1=45 mm, l2=80 mm, size of 003:
100-32/45-40/80- 003 ASG Flexible Coupling
Prod. sheet No.
70 ASG
06.2006
d1, d2 l1, l22) maximum
deviations4)
Nominaltorque
Mn initial1) max nomin. extend. f D d3 x y A
Maxrotational
speed nmax
Moment ofinteria
3)
I
Weight3)
m
Couplingsize
and type
mmmNstop
1/min kgm
2
kg -70 8 32 40 60 54 75 26 3,0 1,2 1,5 1500 0,0011 1,50 002 ASG
100 10 40 45 80 57 85 36 3,5 1,2 1,5 1500 0,0023 2,11 003 ASG
170 10 42 50 80 67 105 44 3,5 1,2 1,5 1500 0,0049 3,64 004 ASG
300 12 55 56 80 80 125 55 4,5 1,5 1,8 1000 0,012 6,18 005 ASG
500 16 65 63 90 93 145 64 4,5 1,5 1,8 1000 0,024 8,8 006 ASG
800 20 80 75 110 98 175 87 4,5 1,5 1,8 1000 0,057 14,4 007 ASG
1400 22 90 100 140 114 200 100 5,0 2,5 1,8 750 0,12 23,4 008 ASG
2100 26 100 110 140 122 230 115 5,0 2,5 2,2 750 0,21 32,5 009 ASG
3400 28 120 120 170 148 260 140 6,0 3,0 2,2 750 0,44 49,6 010 ASG
5000 30 130 130 170 164 300 155 7,0 3,0 2,2 500 0,84 73,7 011 ASG
8300 30 140 165 210 183 360 210 8,0 3,0 2,2 500 1,78 111,5 012 ASG
11400 30 150 175 210 188 400 252 9,5 3,0 2,2 400 2,76 140,9 013 ASG
We produce splineways as recommended, normally acc. to PN-70/M-85005, with the Js9 tolerance.
Material - steel (centre insert-steel or aluminium), polyurethane (elastic pad)1)
Designation of the coupling with lead holes (ow) acc. to the table, other parameters as in the example given above:100-32/45-40/80- 003 ASG Flexible Coupling (no WD version in the version with lead holes)
2)On request, we produce couplings with hub lengths different than the nominal and extended lengths provided in the table.
3)The weight and the moment of inertia have been determined for the coupling with the maximum hole without a splineway.
4)The recommended deviations up to 10% of the maximum deviation value
Applications: pumps; fans; belt and roller conveyors; cranes; stirrers; other machinery and equipment.
Elastic pad working conditions: work in the environment with pH of 512 at temperature of -30o to +80o(temporarily up to +100o).Resistance to chemicals, including: common solvents, fuels, oils and lubricants, sulphuric and hydrochloric acid, soda lye, saltywater and many other chemical substances.
We are also offering tailor-made special versions.
1
-
7/28/2019 Katalog Fena Eng All
16/62
Fabryka Elementw Napdowych FENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
ATB BRAKE COUPLINGS
Example of designation of the ATB type coupling with the nominal torque of Mn=300 Nm, brake drumdiameter of DH=200 mm, distance of the brake drum symmetry axis from the hub origin of L H=49, hub
holes diameters of d1=40 mm, d2=55mm, hub holes lengths of l1=50 mm, l2=65 mm, size of 005:300-200-49-40/50-55/56- 005 Brake Coupling
Prod. sheet No.
39 ATB
06.2006
d1, d2 l1, l22)Nominal
torqueMn initial
1)max nomin.
f D DH3)
B l04)
d3
Max rotationalspeednmax
Moment ofinertia
5)
I
Weight5)
m
Couplingsize
and typemgknim/1mmmN
2kg -
70 8 32 41 23 75 120 50 1 26 4000 0,0043 2,6 002 ATB
170 12 42 49 27 105 160 60 4 44 4000 0,017 5,8 004 ATB
300 18 55 56 33 125 200 80 1 55 3000 0,054 11,0 005 ATB
500 20 64 63 39 145 250 100 0 64 2500 0,155 18,9 006 ATB
800 26 80 77 41 175 320 120 2 91 2000 0,474 34,9 007 ATB
1400 28 90 101 48 200 400 150 6 100 1800 1,37 62,7 008 ATB
3400 38 120 120 60 260 500 190 5 140 1500 3,98 119,5 010 ATB
8300 48 140 166 73 360 630 235 8 215 1200 11,94 241,2 012 ATB
Material - steel, polyurethane (elastic pad)1)
Designation of the coupling with lead holes (ow) acc. to the table, other parameters as in the example given above:300-200-49-ow/50- ow/56- 005 ATB Brake Coupling
2)On request, we produce couplings with hub lengths different than the nominal and extended lengths provided in the table.
3)On request, we produce couplings with brake drums with the diameter different than the diameters provided in the table.
4)The size l0 (LH=l1-l0) dimension may be modified as requested by the customer.
5)The weight and the moment of inertia have been determined for the couplings with the maximum hole without a splineway.
Applications: belt conveyors, bucket conveyors; cranes; other machinery and equipment.
Elastic pad working conditions: work in the environment with pH of 512 at temperature of -30o to +80o(temporarily up to +100o).Resistance to chemicals, including: common solvents, fuels, oils and lubricants, sulphuric and hydrochloric acid, soda lye, saltywater and many other chemical substances.
We are also offering tailor-made special versions.
1
-
7/28/2019 Katalog Fena Eng All
17/62
MAXIMUM DEVIATIONS
002 ATB 004 ATB 005 ATB 006 ATB 007 ATB 008 ATB 010 ATB 012 ATB
x mm 2,0 2,5 3,0 3,0 3,0 3,5 4,0 5,5
y mm 0,8 0,8 1,0 1,0 1,0 1,8 2,2 2,2
A stop. 1 1 1,5 1,5 1,5 1,5 1,5 1,5
The recommended deviations up to 10% of the maximum deviation value
1
-
7/28/2019 Katalog Fena Eng All
18/62
Fabryka Elementw Napdowych FENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
ASD DISC COUPLINGS
Example of designation of the ASD type coupling with the nominal torque of Mn=800 Nm, brake discdiameter of DH=450 mm, thickness of B=30 mm, distance of the brake disc symmetry axis from
the hub origin of LH=81 mm, hub hole diameters of d1=70mm, d2=65mm, hub holes lengthsof l1=110mm, l2=90mm and size of 107
800-450x30-81-70/110-65/90- 107 ASD Disc Coupling
Prod. sheet No.
4 ASD
03.2004
d1, d2 l1, l21) maximum
deviations4)
Nominaltorque
Mn max nomin.D DH x B
3)
f lox y A
Max rotationalspeed
nmax
Moment ofinertia
2)
I
Weight2)
m
Couplingsize and
type
mmmN stop 1/min kgm2
kg -
300 55 110 125 320 x 30 DSA5011,5242,000022133
320 x 30 2000 0,25 27,3500 65 110 145 355 x 30 39 13 2000 0,39 31,9 106 ASD
400 x 30 1500 0,65 43,9800 80 110 175 450 x 30 41 14
1,0
1500 1,00 50,8 107 ASD
450 x 30 1500 1,06 60,41400 90 140 200 500 x 30 48 16 1500 1,56 68,5 108 ASD
500 x 30 1500 1,64 76,12100 100 140 230 630 x 30 50 19
3,0
1,8
1000 3,83 102,5 109 ASD
630 x 30 1000 4,06 123,73400 120 170 260 710 x 30 60 24 750 6,28 141,8 110 ASD
710 x 30 750 6,63 1635000 130 170 300 800 x 30 67 26
4,0750 10,21 186,7 111 ASD
8300 140 210 360 800 x 40 DSA2117,85261,410572337
800 x 40 750 14,99 283,911400 150 210 400 1000 x 40 73 35
5,0
2,2
1,5
600 33,17 371,3 113 ASD
We produce splineways as recommended, normally acc. to PN-70/M-85005, with the Js9 tolerance.Material - steel, polyurethane (elastic pad)1)
On request, we produce couplings with hub lengths different than the nominal and extended lengths provided in the table.2)
The weight and the moment of inertia have been determined for the coupling with the maximum hole3)
On request, we produce brake discs with dimensions different than those provided in the table and for higher rotational speeds.4)
The recommended deviations up to 10% of the maximum deviation value
Applications: belt and bucket conveyors; cranes; other machinery and equipment.
Elastic pad working conditions: work in the environment with pH of 512 at temperature of -30o to +80o(temporarily up to +100o).
Resistance to chemicals, including: common solvents, fuels, oils and lubricants, sulphuric and hydrochloric acid, soda lye, saltywater and many other chemical substances.
We are also offering tailor-made
special versions.
1
-
7/28/2019 Katalog Fena Eng All
19/62
Fabryka Elementw NapdowychFENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
ASP RUBBER BUSH COUPLINGS
Example of designation of the ASP type coupling with the nominal moment of Mn=510 Nm, hub holediameters of d1=50 mm, d2=60mm, hub hole lengths of l1=75 mm, l2=80 mm,
size of 083 in the A version510-50/75-60/80- 083 ASP-A Rubber Bush Coupling
Prod. sheet No.
6 ASP
03.2004
maximumdeviations
3)Nominaltorque
Mn
Version d1, d2
max
l1, l21)
nomin.
D f
x y A
Max rotationalspeednmax
Momentof inertia
2)
I
Weight2)
m
Couplingsize and
type
mmmNstop
1/min kgm
2
kg -20 B
30 C18 30 78 0,2 8000 0,0008 1,11 077 ASP
35 B
50 CPSA87015,14100,00036095322
50 A
63 B
80 C25 40 105
0,3
5000 0,0027 2,11 079 ASP
80 A
125 B
160 C28 45 130
2
0,4 4000 0,006 3,26 080 ASP
300 B
400 C30 55 160
0,5
0,5 3000 0,025 7,90 081 ASP
400 B
540 C PSA2809,21950,000528915605
510 A
680 B
850 C65 90 248 2000 0,15 24,2 083 ASP
1000 A
1200 B
1600 C80 105 270
0,8 0,8
1800 0,23 31,1 084 ASP
2000 A
3000 B100 130 320
5
1500 0,50 51,1 085 ASP
4000 A
6000 B125 165 400
1,0 1,0
1200 1,70 102 086 ASP
7500 A
12500 BPSA78098103,50001035002061
16000 A21000 B
200 280 600
81,2 1,2
0,5
1000 10,1 310 088 ASP
We produce splineways as recommended, normally acc. to PN-70/M-85005, with the Js9 tolerance.Material- steel, rubber reinforced with fabric interlayer and beginning from 081 size with steel mesh.1)
On request, we produce couplings with hub lengths different than the nominal and extended lengths provided in the table.2)
The weight and the moment of inertia have been determined for the coupling with the maximum hole.3)
The recommended deviations up to 10% of the maximum deviation value.
1
-
7/28/2019 Katalog Fena Eng All
20/62
Application: pumps; fans; belt and roller conveyors; cranes; stirrers; other machinery and equipment.
Elastic pad working conditions: work at temperature of -30o do +100o Resistance to oils, lubricants and salty water.
We are also offering tailor-made special versions.
20
-
7/28/2019 Katalog Fena Eng All
21/62
Fabryka Elementw Napdowych FENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
ATP BRAKE COUPLINGSProd. sheet No.
7 ATP
Example of designation of the ATP type coupling with the nominal torque of Mn=510 Nm, brakedrum diameter of DH=320mm, distance of the brake drum symmetry axis from the hub origin ofLH=90mm, hub holes diameters of d1=50 mm, d2=60mm, hub holes lengths of l1=75 mm, l2=80 mm,
size of 053, in the A special version
510-320-90-50/75-60/80- 053 ATP-A Brake Coupling 03.2004
maximumdeviations
3)Nominal torque
Mn
Ver-sion
d1, d2max
l1, l21)
nomin.D f DH lo B m
x y A
Max rotat.speednmax
Momentof inertia
2)
I
Weight2)
m
Couplingsize and
type
mmmN deg 1/min kgm2
kg -
80 A
125 B28 45 130 2 160 5 60 13
0,4 4000 0,020 5,80 050 ATP
300 B 30 70 160 200 5 80 15
0,5
0,5 3000 0,069 13 051 ATP
400 B 50 65 198 250 10 100 20 2500 0,20 23 052 ATP
510 A
680 B65 90 248 320 15 120 25
2000 0,61 45 053 ATP
1000 A
1200 B80 105 270 400 25 150 35
0,8 0,8
1800 1,45 68 054 ATP
2000 A3000 B
100 130 320
5
500 30 190 40 1500 3,68 112 055 ATP
4000 A 125 165 400 8 630 36 235 52
1,0 1,0
0,5
1200 11,9 226 056 ATP
We produce splineways as recommended, normally acc. to PN-70/M-85005, with the Js9 tolerance.Material - steel, rubber reinforced with fabric interlayer and beginning from 051 size with steel mesh (elastic pad).1)
On request, we produce couplings with hub lengths different than the nominal and extended lengths provided in the table.2)
The weight and the moment of inertia have been determined for the coupling with the maximum hole3)
The recommended deviations up to 10% of the maximum deviation value
Applications: belt and bucket conveyors; cranes; other machinery and equipment.
Elastic pad working conditions: work at temperature of -30o do +100o Resistance to oils, lubricants and salty water.
We are also offering tailor-made
special versions.
21
-
7/28/2019 Katalog Fena Eng All
22/62
Fabryka Elementw Napdowych FENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
ATT DISC COUPLINGSProd.sheet No.
8 ATT
Example of designation of the ATT type coupling with the nominal torque of Mn=540 Nm, brake discdiameter of DH=450 mm, thickness of B=30 mm, distance of the brake disc symmetry axis from thehub origin of LH=94 mm, hub holes diameters of d1=50mm, d2=40mm, hub holes lengths of l1=110mm,
l2=80mm, size of 082:540-450x30-94-50/110-40/80- 082 ATT Disc Coupling
03.2004
d1, d2 l1, l21) maximum
deviations4)
Nominaltorque
Mn max nomin.D DH x B
3)f
x y A
Max rotationalspeednmax
Moment ofinertia
2)
I
Weight2)
m
Couplingsize and
type
mmmN deg 1/min kgm2
kg -
540 50 110 200 450 x 30 2100 0,99 47,1 082 ATT
1600 80 110 270 500 x 300,8 0,8
1800 1,57 68,5 084 ATT
3000 100 140 320 630 x 30
5
1500 3,91 110,0 085 ATT
6000 125 170 400 710 x 301,0 1,0
1300 6,80 166,3 086 ATT
8500 160 210 530 800 x 308
1,2 1,2
0,5
1000 12,6 261,8 087 ATT
We produce splineways as recommended, normally acc. to PN-70/M-85005, with the Js9 tolerance.Material - steel, rubber reinforced with fabric interlayer and steel mesh (elastic pad).1)
On request, we produce couplings with hub lengths different than the nominal and extended lengths provided in the table.2)
The weight and the moment of inertia have been determined for the clutch with the maximum hole.3)
On request, we produce brake discs with dimensions different than those provided in the table and for higher rotational speeds.4)
The recommended deviations up to 10% of the maximum deviation value.
Applications: belt and bucket conveyors; cranes; other machinery and equipment.
Elastic pad working conditions: work at temperature of -30o do +100o Resistance to oils, lubricants and salty water.
We are also offering tailor-made
special versions.
22
-
7/28/2019 Katalog Fena Eng All
23/62
Fabryka Elementw Napdowych FENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
SEK FLEXIBLE COUPLINGProd. sheet No.
65 SEKExample of designation of the SEK type coupling with the nominal torque of Mn=40000 Nm, hub holesdiameters of d1=140 mm, d2=180mm, hub holes lengths of l1=200 mm, l2=240 mm, size of 103:
40000-140/200-180/240- 103 SEK Flexible Coupling03.2004
d1, d21)
l1, l22) maximum
deviations4)
Nominaltorque
Mn initial1) max nomin. extend.
f D D1,D2x y A
Max rotationalspeednmax
Weight3)
m
Couplingsize
and type
mmmN deg 1/min kg -
5707156101114 000 - 140 200 - 10 320 205 1,5 1 1 1000 90 101 SEK
110 165 - 170 12025 000 - 140 200 - 10 400 210 1,5 1 1 900 135 102 SEK
160 240 240 160
100 140 200 280 230 215
40 000 100 180 240 280 10 480 290 1,5 1 1,0 750 250 103 SEK
100 200 280 280 320 310
120 180 240 280 290 370
63 000 120 200 280 280 20 560 320 2,0 0,8 1,0 600 410 104 SEK
120 220 280 280 350 425
140 200 280 330 320 455
100 000 140 220 280 330 20 610 350 3,0 0,8 1,0 500 475 105 SEK
140 250 330 330 400 580
160 200 280 380 320 660
160 000 160 250 330 380 20 730 400 4,0 1,0 1,0 450 790 106 SEK160 300 380 380 480 940
We produce splineways as recommended, normally acc. to PN-70/M-85005, with the Js9 tolerance.Material: hub-cast iron, rim- ductile cast iron, elastic pad -polyurethane.1)
The size of the required hub should be stated when ordering the coupling with lead hole,i.e. state the D1 and D2dimensions.2)
On request, we produce couplings with hub lengths different than the ones provided in the table.3)
The weight has been determined for the coupling with the maximum hole without a splineway.4)
The recommended deviations up to 10% of the maximum deviation value
Applications: stirrers, crushers and other machinery and equipment.
Elastic pad working conditions: work in the environment with pH of 512 at temperature of -30o to +80o(temporarily up to do
+100o). Resistance to chemicals, including: common solvents, fuels, oils and lubricants, sulphuric and hydrochloric acid, sodalye, salty water and many other chemical substances.
We are also offering tailor-made special versions.
2
-
7/28/2019 Katalog Fena Eng All
24/62
Fabryka Elementw NapdowychFENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
SETT HIGHLY-FLEXIBLE COUPLINGSProd. sheet No.
90 SETT
Example of designation of the SETT coupling with the hub holes diameter of d1=70 mm, d2=80mm,hub holes lengths of l1=140 mm, l2=140 mm, total length of L=390, size of 100:
70/140-80/140-390- 100 SETT Highly-Flexible Coupling03.2004
d1,d2 l1, l2 *maximumdeviations
Nominaltorque
Mn
Maximumtorque
Mmax
D
max nominal.
L*
x y A
Coupling sizeand type
mmmN deg. -
1100 3250 316 80 140 390 4 1,2 1,5 100 SETT
2300 6900 360 90 140 440 4 1,2 1,5 200 SETT
We produce splineways as recommended, normally acc. to PN-70/M-85005, with the Js9 tolerance.
Material - steel, elastic elements - elastomer* On request, we produce couplings with hub lengths and total length different than those provided in the table.
Application: the couplings feature two elastic elements with high fatigue strength and high elasticity. They attenuate the curve ofvariations in torque, damp vibrations and compensate the inaccurate setting of the assemblies working together. They are usedin conveyors, pumps, compressors, blowers, etc.
The working conditions of elastic pads: at temperature of -30o to +80o(temporarily up to +100o). The manufacturers approval isrequired for work in the environment where contact is established with chemicals.
Deviations maximum deviations may not occur simultaneously
2
-
7/28/2019 Katalog Fena Eng All
25/62
SETT-B highly-flexible coupling with brake disc
Designation method:
Highly-flexible coupling d1/l1 - d2/l2 - L coupling size and type B - LH - DH / D1 x b
SETT-C highly-flexible coupling with brake disc
Designation method:
Highly-flexible coupling d1/l1 - d2/l2 - L coupling size and type -C - LH - DH x b
SETT-D highly-flexible coupling with brake drum
Designation method:
Highly-flexible coupling d1/l1 - d2/l2 - L coupling size and type -D - LH - DH x B
2
-
7/28/2019 Katalog Fena Eng All
26/62
Fabryka Elementw Napdowych FENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
APMX OVERLOAD COUPLINGSwith adjustable slipping moment
Prod. sheet No.
15 APMX
Example of designation of the APMX type coupling with the slipping moment of Mk=250 Nm, hub holediameters of d1=35 mm, d2=30mm, hub hole lengths of l1=55 mm, l2=60 mm, size of 003:
250-35/55-30/60- 003 APMX Overload Coupling 03.2004
maximumdeviations
2)Slippingtorque
Mk
d1
max
d2
max
l1
min
l2
min
f D D1
x y A
Max rotationalspeednmax
Moment ofinertia
1)
I
Weight1)
m
Couplingsize
and type
.gedmmmN 1/min kgm2
kg -
50w90 24 25 40 40 120 XMPA10014,3500,0000358
90w200 28 32 50 55 2 150 105
0,5 0,5
2500 0,017 7,23 002 APMX
120w300 35 32 50 55 170 125 2000 0,028 9,3 003 APMX
220w500 40 40 55 80 190 145 1800 0,059 15,2 004 APMX
330w800 60 45 70 90 5 240 175 1500 0,164 27,2 005 APMX
530w1400 65 50 80 105 290 200
0,8 0,8
1200 0,39 45,7 006 APMX
920w2100 75 65 90 120 7 320 230 1,0 1,0
0,5
1000 0,68 64,4 007 APMX
We produce splineways as recommended, normally acc. to PN-70/M-85005, with the Js9 tolerance.Material - steel, polyurethane (elastic pad), friction lining (friction pads).1)
The weight and the moment of inertia have been determined for the coupling with the maximum hole without a splineway and
min. hubs length.2) The recommended deviations up to 10% of the maximum deviation value
Applications: The overload couplings are used in the equipment and machines where overloads may occur likely to causemechanism failure, accident dangerous for health and life or the damage requiring lengthy repair that is forbidden in specificconditions.If the machine is blocked and this not cease by itself, an automatic or emergency drive disengaging system by the operating staffshould be provided.
Examples of use: v chain drives, gear drives and belt drives; vequipment: belt conveyors, scraper conveyors, large fans, stirrers;
vmachinery: combined cutter loaders; coal ploughs; excavating-dumping conveyors, etc.
Elastic pad working conditions: work in the environment with pH of 512 at temperature of -30 o to +80o(temporarily up to +100o).Resistance to chemicals, including: common solvents, fuels, oils and lubricants, sulphuric and hydrochloric acid, soda lye, saltywater and many other chemical substances.
We are also offering tailor-made special versions.
2
-
7/28/2019 Katalog Fena Eng All
27/62
Fabryka Elementw NapdowychFENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
ASM RUBBER MEMBRANE COUPLINGSProd. sheet
No.
11 ASM
Example of designation of the ASM type coupling with the nominal torque of Mn=440 Nm, brake drumdiameter of DH=320*, distance of the drum flange symmetry axis from the hub origin of LH=100* mm, hubholes diameters of d1=60 mm, d2=50mm, hub holes lengths of l1=65 mm, l2=70 mm, size of 003, in the C
version:440-320*-100*-60/65-50/70- 003 ASM-C Rubber Membrane Coupling 03.2004
Version: A detachable after dismounting the rubber membranes
B detachable without dismounting the rubber membranes
C A version with brake drum
D B version with brake drum
* - DH, LH applies to C and D type ; LH=l1+l0 (l0 see table)
2
version A
version B
version C
version D
-
7/28/2019 Katalog Fena Eng All
28/62
A, B -version C,D - versionNominaltorque
Mn
Max rotationalspeednmax
Moment ofinteria
I
Weight
m
Max rotationalspeednmax
Moment ofinertia
I
Weight
m
Couplingsize
and type
Nm 1/min kgm2
kg 1/min kgm2
kg -
147 3600 0,015 6,8 1500 0,060 12,5 001 ASM
245 3000 0,035 13,5 1500 0,154 19,8 002 ASM
440 2600 0,102 19,8 1500 0,541 42,5 003 ASM
735 2200 0,210 28,5 1500 0,672 50,3 004 ASM
1320 1900 0,465 51,0 1500 1,64 86,0 005 ASM2260 1600 1,07 95,5 1500 2,23 128,1 006 ASM
3920 1400 2,10 123,4 1000 4,68 163,4 007 ASM
6670 1200 5,05 210,0 1000 16,3 285,2 008 ASM
6670 1000 9,35 285,2 1000 21,3 362,5 009 ASM
11500 1000 9,35 285,2 1000 24,6 406,5 010 ASM
19800 800 16,50 335,3 - - - 011 ASM
30000 700 18,25 360,8 - - - 111ASM
68600 600 19,85 392,7 - - - 012 ASM
176500 500 - - - - - 013 ASM
Dimensions
maximum
deviations
4)Coupling
size
d11)
max
d2
max
l12)
nominal.
l22)
nominal. D f
3)
DH l03)
B x y A and typemm deg. -
40 35 50 50 160 20 200 25 80 2,0 1,0 1,0 001 ASM
50 45 60 60 192 45 250 30 100 2,5 1,0 1,0 002 ASM
60 55 70 70 220 45 320 30 120 3,0 1,5 1,0 003 ASM
70 65 80 80 260 55 320 20 120 3,5 2,0 1,0 004 ASM
80 70 110 110 298 60 400 0 150 4,0 2,5 1,5 005 ASM
100 95 140 140 356 50 400 -30 150 4,5 3,0 1,5 006 ASM
120 110 170 210 406 40 500 -40 190 5,0 3,5 1,5 007 ASM
140 125 210 210 490 65 630 -60 235 6,0 4,0 1,5 008 ASM
165 150 210 250 560 55 630 -60 235 6,5 4,5 1,5 009 ASM
165 150 250 250 560 80 710 -80 265 6,5 4,5 1,5 010 ASM
200 180 250 250 670 100 - - 7,0 4,5 1,5 011 ASM
240 210 250 250 790 100 - - 7,0 4,5 1,5 111 ASM260 250 250 250 910 100 - - 8,0 5,0 1,5 012 ASM
- 320 300 280 1110 100 - - 8,5 5,0 1,5 013 ASM
We produce splineways as recommended, normally acc. to PN-70/M-85005, with the Js9 tolerance.Material - steel, rubber cord fabric (rubber membrane).1)
A hole larger than the one provided in the table can be made when agreed.2)
On request, we produce couplings with hub lengths different than the nominal and extended lengths provided in the table. The l2dimension is the minimum dimension.
3)A size different than the one provided in the table can be made when agreed.
4)The recommended deviations up to 10% of the maximum deviation value.
Applications: the couplings feature membranes made of rubber cord fabric with very high fatigue strength and high flexibility. Thecouplings attenuate the curve of changes in torques, damp vibrations and compensate the irregular setting of the assembliesworking together. They are used in belt conveyors, scraper conveyors; crushers, stirrers, compressors, fans. They are designed forwork with motors and engines.
Rubber membrane working conditions: work at temperature of -30o do +100o A coupling with membranes madeof non-flammable rubber are made on special order.
We are also offering tailor-made special versions
2
-
7/28/2019 Katalog Fena Eng All
29/62
Fabryka Elementw NapdowychFENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
ASM RUBBER MEMBRANE COUPLINGS special versions
Example of the special version of the ASM coupling (acc. to product sheet No. 11 ASM):
K with one flange P with one membrane
PK with one membrane and flange PKK - with one membrane and two flangesLWP with bearing and countershaft PWP - with one membrane and countershaft
The solutions may be subject to any further modifications according to the Customers requirementsand do not restrict any other constructional modifications to the ASM coupling.
Prod. sheet No.
11 ASM/SP
03.2004
2
-
7/28/2019 Katalog Fena Eng All
30/620
-
7/28/2019 Katalog Fena Eng All
31/62
Fabryka Elementw Napdowych FENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
ASO TYRE COUPLINGSProd. sheet No.
60 ASOExample of designation of the ASO type coupling with the nominal torque of M n=250 Nm, hub holesdiameters of d1=38 mm, d2=42mm, hub hole lengths of l1=55 mm, l2=80 mm, size of 070:
250-38/55-42/80- 070 ASO Tyre Coupling
03.2004
d1, d2 l1, l22)
Maximumdeviations
4)Nominaltorque
Mn initial1
max nomin.
f D A B3)
x y A
Max rotationalspeednmax
Momentof inertia
I
Weight
m
Couplingsize
and type
mmmN deg 1/min kgm2
kg -
24 8 32 30 22 104 - - 1,3 1,1 4500 0,0015 1,8 040 ASO
66 8 38 40 25 133 - - 1,7 1,3 4500 0,0024 2,6 050 ASO127 10 45 50 33 165 - - 2,0 1,6 4000 0,011 4,5 060 ASO
250 10 50 55 23 187 50 15 2,3 1,9 3600 0,019 7,0 070 ASO
375 10 60 60 25 211 54 18 2,6 2,1 3100 0,038 11,0 080 ASO
500 20 70 70 25 235 60 18 3,0 2,4 3000 0,067 15,9 090 ASO
675 20 80 80 25 254 62 18 3,3 2,6 2600 0,116 22,4 100 ASO
875 20 90 90 25 279 62 18 3,7 2,9 2300 0,175 29,8 110 ASO
1330 20 100 110 29 314 67 18 4,0 3,2 2050 0,298 41,0 120 ASO
2325 30 130 130 32 359 73 19 4,6 3,7 1800 0,557 53,8 140 ASO
3770 30 140 165 30 402 78 21 5,3 4,2 1600 1,07 91,5 160 ASO
6270 30 150 180 46 470 94 21 6,0 4,8 1500 1,92 122 180 ASO
9325 30 150 200 48 508 103 21 6,6 5,3 1300 2,85 146 200 ASO
11600 30 160 240 55 562 118 22 7,3 5,8 1100 4,78 210 220 ASO
14675 30 190 250 59 628 125 27 8,2 6,6
4
1000 8,03 286 250 ASOWe produce splineways as recommended, normally acc. to PN-70/M-85005, with the Js9 tolerance.Material - steel, rubber cord fabric (tyre).1)
Designation of the coupling with lead holes (ow) acc. to the table, other parameters as in the example given above:250-ow/55- ow/80- 070 ASO Tyre Coupling
2)On request, we produce couplings with hub lengths different than the nominal and extended lengths provided in the table.
3)The size of loosening the collet set screws to replace the tyre.
4)The recommended deviations up to 10% of the maximum deviation value
Applications: the couplings have the tires made of rubber cord fabric with high fatigue strength and high flexibility. The couplingsattenuate the curve of changes in torques, damp vibrations and compensate the irregular setting of the assemblies workingtogether. They are used in blowers, fluid stirrers, rotor pumps, compressors, centrifuges, portable fans.
Tyre working conditions: work at temperature of -50C do +50CA coupling with non-flammable and antistatic tyre can bedelivered on order designed for work at -15C to +70C.
We are also offering tailor-made
special versions.
1
size
070-250 ASO
size
040-060 ASO
-
7/28/2019 Katalog Fena Eng All
32/62
Fabryka Elementw Napdowych FENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
ASOT TYRE COUPLINGSwith clamping bushes
Prod. sheet No.
61 ASOT
Example of designation of the ASOT type coupling with the nominal moment of Mn=250 Nm, with theTZ outer clamping bush with the diameter of d1=38 and the TW inner clamping bush with the diameter
of d2= 45 mm, size of 070:250-38TZ-45TW- 070 ASOT Tyre Coupling 03.2004
hub with TW
sleeve
hub with TZsleeve
d1, d2 d1, d2
Maximum
deviations4)
Nominaltorque
Mnmin max
l1, l2min max
l1, l2f D A B
3)
x y A
Maxrotational
speednmax
Weight
m
Couplingsize
and type
gedmmmN 1/min kg -
24 11 25 23 11 25 23 22 104 - 8 1,3 1,1 4500 1,7 040 ASOT
66 11 321)
26 11 321)
26 25 133 - 10 1,7 1,3 4500 2,4 050 ASOT
127 14 422)
26 14 422)
26 33 165 - 10 2,0 1,6 4000 4,0 060 ASOT
250 19 50 33 14 422)
26 23 187 52 15 2,3 1,9 3600 6,2 070 ASOT
375 24 60 45 19 50 33 25 211 56 18 2,6 2,1 3100 9,8 080 ASOT
500 24 60 45 24 60 45 25 235 62 18 3,0 2,4 3000 14,0 090 ASOT
675 30 75 52 24 60 45 25 254 65 18 3,3 2,6 2600 19,8 100 ASOT
875 30 75 52 30 75 52 25 279 65 18 3,7 2,9 2300 23,4 110 ASOT
1330 35 90 90 30 75 52 29 314 70 18 4,0 3,2 2050 34,4 120 ASOT
2325 35 90 90 35 90 90 32 359 75 19 4,6 3,7 1800 46,6 140 ASOT
3770 40 100 102 40 100 102 30 402 80 21 5,3 4,2 1600 68,0 160 ASOT
6270 55 110 115 55 110 115 46 470 96 21 6,0 4,8 1500 89,4 180 ASOT
9325 55 110 115 55 110 115 48 508 105 21 6,6 5,3 1300 114,0 200 ASOT
11600 70 125 128 70 125 128 55 562 120 22 7,3 5,8
4
1100 148,0 220 ASOT
Material - steel (cast iron-some sizes of collets), rubber reinforced with fabric interlayers (tyre)
We produce splineways as recommended, normally acc. to PN-70/M-85005, with the Js9 tolerance. see note 1),2)1)
The reduced hole height of t2=2.3 mm (standard is t2=3.3 mm, marking acc. to PN-70/M-85005) forF32 hole2)
The reduced hole height of t2=2.3 mm (standard is t2=3.3 mm, marking acc. to PN-70/M-85005) forF40-F42 hole3)
The size of loosening the collet set screws to enable tyre replacement.4)
The recommended deviations up to 10% of the maximum deviation value
The clamping bushes enable easy installation and dismounting of the coupling without having to utilise specialist tools, e.g.turnbuckles or heaters, etc. (only hexagonal key is needed). You just install the coupling (after sliding it onto the sleeve pin andhub) by tightening or loosening two (three) bolts or screws tightening the coupling hub on the set sleeve and pin. The sleeve ismade with splineway and with an appropriate loose hole, accommodated to the pin diameter.
Tyre working conditions: work at temperature of -50C do +50CA coupling with non-flammable and antistatic tyre can bedelivered on order designed for work at -15C to +70C.
The ASOT coupling hubs may be juxtaposed with the ASO coupling hubs (product sheet No. 60ASO) thus forming the completecoupling.
We are also offering tailor-made
special versions.
2
size
040-060 ASOT
size
070-220 ASOT
inner clamping
bush TW
outer clamping
bush TZ
-
7/28/2019 Katalog Fena Eng All
33/62
Fabryka Elementw NapdowychFENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
AMB STEEL MEMBRANE COUPLINGS /318 series/Prod. sheet No.
43 AMBExample of designation of the AMB type coupling with the nominal torque ofMn=150 Nm, hub holesdiameter of d1=28 mm, d2=35 mm, hub holes lengths ofl1=30 mm, l2=40 mm, size of 35 in the A version:
150-28/30-35/40- 35 AMB-A Steel Membrane Coupling 03.2004
Coupling Size 20 25 35 38 42 50
Nominal torque Mn 0050030020510653]mN[
0.50
35 60 150 200 300 500
0,750
25 40 100 120 160 200
Torque at Axial DeviationPer One Membrane [Nm]
1,000
10 25 50 70 - -
Max. Rotational Speed [1/min] 20000 16000 13000 12000 10000 8000
ver. A 0,3 0,6 1,0 1,4 2,1 3,4ver. B 0,5 1,1 1,7 2,4 3,3 5,8Weight [kg]
1)
ver. C 0,4 0,7 1,2 1,8 2,5 4,6
ver. A 0,11 0,30 0,87 1,6 2,6 6,5
ver. B 0,20 0,55 1,5 2,9 4,6 11,8Moment of Inertia [kgm
210
-3]1)
ver. C 0,15 0,42 1,1 2,2 3,6 9,2
version A membrane package
version B version C
-
7/28/2019 Katalog Fena Eng All
34/62
Coupling Size 20 25 35 38 42 50
Dimensions [mm]
max 20 25 35 38 42 50d1,d2initial
2) 4 6 10 10 12 12
82140149288665D
l1,l23) nomin. 20 25 30 30 35 40
l3 838203626242
l4 238262818161
11018665f
ver. A,B 35 40 45 55 55 70m
ver. C 28 32 36 45 45 58Max. flexibility
4)
ver. A 1 1 1 1 1 1angular [deg]
ver. B,C 2 2 2 2 2 2
ver. A 0,6 0,8 1 1,2 1,4 1,6axial [mm]
ver. B,C 1,2 1,6 2 2,4 2,8 3,2
ver. A - - - - - -
ver. B 0,5 0,5 0,5 0,6 0,6 0,8
radial [mm]
ver. C 0,1 0,2 0,2 0,3 0,3 0,4
We produce splineways as recommended, normally acc. to PN-70/M-85005, with the Js9 tolerance.Material - steel1)
The weight and the moment of inertia have been determined for the coupling with the maximum hole without a splineway.2)
Designation of the coupling with lead holes(ow)acc. to the table, other parameters as in the example of the designation above:150-ow/30- ow/40- 35 AMB-A Steel Membrane Coupling
3) On request, we produce couplings with hub lengths different than the lengths provided in the table.4)
The recommended deviations up to 10% of the maximum deviation value.
Applications: machinery and equipment for chemical, paper, steel, food and power industry, including: stirrers, conveyors,blowers, fans, power generators, pumps, compressors, etc.
Membrane working conditions: work at temperature of up to 150oC
We are also offering tailor-made special versions.
-
7/28/2019 Katalog Fena Eng All
35/62
Fabryka Elementw NapdowychFENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
AMB STEEL MEMBRANE COUPLINGS /314 series/Prod. sheet No.
44 AMB
Example of designation of the AMB type coupling with the nominal torque ofMn=1800 Nm, hub holesdiameter of d1=60 mm, d2=80 mm, hub holes lengths ofl1=75 mm, l2=90 mm, size of 75 in the A version:
1800-60/75-80/90- 75 AMB-A Steel Membrane Coupling 03.2004
version C
version A
version B -mounting x
version Bmounting y
version B -mounting z
membrane package
-
7/28/2019 Katalog Fena Eng All
36/62
Coupling Size 55 65 75 80 85 90 98
Nominal torque Mn [Nm] 800 1200 1800 2800 6000 9000 14000
Torque at Axial Deviation 0.250 800 1200 1800 2800 6000 9000 14000
0.500
800 1200 1800 2800 4500 6000 9000
1,000
600 900 1400 2000 2500 3000 4000
Per One Membrane [Nm]
1,300
400 600 1000 1500 - - -
Coupling Torque at Variable Load andMax. Deflection [Nm] 250 300 550 850 1600 1900 3500
Max. Rotational Speed [1/min] 6700 5900 5100 4750 4300 4000 3400
ver. A 4,2 6,4 9,6 12,5 15,5 19,5 30Weight [kg]1)
ver. B 5,7 8,5 12,5 16,5 21 27 42ver. A 6,1 11,8 23,8 36,5 57 83 174Moment of Inertia [kgm
210
-3]1)
ver. B 10,2 18,7 37,5 59 95 138 294
Dimensions [mm]
max2) 65 (55) 75 (65) 85 (75) 90 (80) 100 (85) 110 (90) 120 (100)d1,d2
initial3) 12 16 16 20 20 24 24
052512002081861541821D
l1,l24)
nomin. 55 65 75 80 80 90 100
l3 4210210110118014947
l4 56135183173113141149
l5 36166575558483
32025151411111f
6664444s
310101875,55,5k
m 40 40 48 55 62 66 82
Max. flexibility5)
ver. A 1,3 1,3 1,3 1,3 1 1 1angular [deg]
ver. B,C 2,6 2,6 2,6 2,6 2 2 2
ver. A 1,0 1,1 1,3 1,3 1,0 1,2 1,4axial [mm]
ver. B,C 2,0 2,2 2,6 2,6 2,0 2,4 2,8
ver. A - - - - - - -
ver. B 1,75 2,15 2,5 2,55 2,0 2,5 2,0
radial [mm]
ver. C 1,0 1,2 1,4 1,5 1,1 1,4 1,5
We produce splineways as recommended, normally acc. to PN-70/M-85005, with the Js9 tolerance.Material - steel1)
The weight and the moment of inertia have been determined for the coupling with the maximum hole without a splineway.2Dimensions in brackets refer to yor zmethod of installation.
3)
Designation of the coupling with lead holes(ow)acc. to the table, other parameters as in the example of the designation above:1800-60/75-80/90- 75 AMB-A Steel Membrane Coupling
4)On request, we produce couplings with hub lengths different than the lengths provided in the table.
5)The recommended deviations up to 10% of the maximum deviation value.
Applications: machinery and equipment for chemical, paper, steel, food and power industry, including: stirrers, conveyors,blowers, fans, power generators, pumps, compressors, etc.
Membrane working conditions: work at temperature of up to 250oC
We are also offering tailor-made special versions.
-
7/28/2019 Katalog Fena Eng All
37/62
Fabryka Elementw Napdowych FENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
AUK BOW COUPLINGSProd. sheet No.
31 AUK
Example of designation of the AUK type coupling with the nominal torque of Mn=500 Nm, hub holesdiameters of d1=40 mm, d2=45mm, hub holes lengths of l1=80 mm, l2=110 mm, size of 003:
500-40/80-45/110- 003 AUK Bow Coupling03.2004
d1, d2 l1, l22) maximum
deviations2)
Nominaltorque
Mn max nomin.D f
x y A
Max rotationalspeednmax
Moment ofinertia
I
Weight
m
Couplingsize
and type
mmmN deg 1/min kgm2
kg -
200 35 60 195 5 3 2,5 1500 0,016 6,8 001 AUK
360 45 80 210 5 3 2,5 1500 0,028 10,7 002 AUK
500 55 80 260 10 4 3,0 1500 0,120 16,2 003 AUK
800 65 110 280 10 4 3,5 1500 0,135 25,5 004 AUK
1250 75 140 300 10 5 3,5 1250 0,205 37,5 005 AUK
1600 85 140 360 15 5 4,5 1000 0,28 47,5 006 AUK
2500 110 170 420 20 6 4,5
4
1000 0,81 85,0 007 AUK
We produce splineways as recommended, normally acc. to PN-70/M-85005, with the Js9 tolerance.Material - steel, rubber cord fabric (bows)1)
On request, we produce couplings with hub lengths different than the nominal and extended lengths provided in the table.2)
The recommended deviations up to 10% of the maximum deviation value.
Applications: the couplings feature bows made of rubber cord fabric with very high fatigue strength and high flexibility. Thecouplings attenuate the curve of changes in torques, damp vibrations and compensate the irregular setting of the assembliesworking together. They are used in belt conveyors, fluid stirrers, pumps, compressors, centrifuges, fans.
Bow working conditions: work at temperature of -25C do +60CA coupling with bows made of non-flammable rubber can bemade on special request.
We are also offering tailor-made special versions.
-
7/28/2019 Katalog Fena Eng All
38/62
Fabryka Elementw Napdowych FENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
ASL Clamp CouplingsProd. sheet No.
1 ASL
Example of designations ASL type couplings with the hole diameter of d=45 mm and size of 103:
45- 103 ASL Clamp Coupling
06.2006
Nominaltorque
Mn
dmax
D LMax rotational
speednmax
Moment ofinertia
I
Weight
m
Couplingsize
mgknim/1mmmN2
kg -
75 25
105 30LSA1019,3300,061109
150 35
210 40
LSA2015,6700,0461001
300 45
420 55LSA3012,8310,0461521
600 60
850 65LSA4019,31130,0012041
1200 70
1600 75LSA5014,81750,0012051
LSA6012,62990,0062561080042
3400 90 190 260
400
0,14 31,3 107 ASL
LSA8019482,00330120010084
LSA9010634,00330320110056
LSA0116786,00330725210059
LSA11181133,100400304100031
LSA21188139,208404306100091
LSA31154267,408408308100062
38000 200 420 560
350
9,48 362 114 ASL
We produce splineways as recommended, normally acc. to PN-70/M-85005, with the Js9 tolerance.Material - steel, cast iron
We are also offering tailor-made special versions.
-
7/28/2019 Katalog Fena Eng All
39/62
Fabryka Elementw Napdowych FENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
ASK FLANGE COUPLINGSProd. sheet No.
2 ASKExample of designation ASK type coupling with the hole diameter of d=45 mm and size of 103:
45- 103 ASK Flange Coupling
03.2004
Nominaltorque
Mn
dmax
D LMax rotational
speednmax
Moment ofinertia
I
Weight
m
Couplingsize
mgknim/1mmmN2
kg -
95 25
130 30130 116 1900 0,009 5,0 101 ASK
190 35 9,0
260 40
420,0041
8,7
102 ASK
380 45 12,5
520 50190
164 1800
0,04712,0
103 ASK
750 55 26,6
1050 60 25,6
1500 65 24,8
2100 70
220 210 1600 0,12
24,0
104 ASK
3000 80 43,5
4200 90260 260 1400 0,27
40,7105 ASK
6000 100 85,0
8500 110 80,0
11000 125
320330
12000,80
73,0106 ASK
17000 140 380 400 1120 1,62 117,0 107 ASK
24000 160 262,0
34000 180 21,5084 242,0
48000 200
450
560
1000
5,30 248,0108 ASK
We produce splineways as recommended, normally acc. to PN-70/M-85005, with the Js9 tolerance.Material - steel, cast iron
We are also offering tailor-made special versions.
-
7/28/2019 Katalog Fena Eng All
40/62
Fabryka Elementw NapdowychFENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
AHH SHOE BRAKES / 200 series /with ZE or EB type electrohydraulic thrustor
Example of designation ofthe AHH type shoe brake with the drum diameter ofDH=250 with the ZE 500/50
S500. 400 V AC / 50 Hz electrohydraulic thrustor without a delay valve of the size of 264:250-ZE 500/50 S500. 400 V AC / 50 Hz- 264 AHH Shoe Brake
Prod. sheet No.
50 AHH
06.2006
Brake material: ductile cast iron; stainless steel pins; asbestos-free brake lining; thrustorcase - aluminium.
Application: The two-shoe radial brakes with the electromagnetic thrustor of the ZE or EB type (and derivative
types) are designed for work with brake drums on their external face. They are applied in the drives of: vcranes,
vcontinuous transport equipment, v machines for: steel, construction, paper and mining industry (not requiringspecial approvals) and others.
Working conditions: The brake is designed for work in moderate climate, on the ground. When working outdoor, it
is recommended to cover the brake against direct rainfall.Basically, the brake is designed for work in the horizontal position (the base is fitted to the horizontal surface). Workin the position deflected from vertical position is possible only after consultation with the manufacturer.
Thrustor:- ZE...S...; EB...C...- ZEW...S...
- ZEM...S...
- thrustor with the brake spring, [operating mode S1, S3 to 100% 2000 c/h ]- thrustor with the brake spring and connector (allows to signal the upper piston rod position)
[operating mode S1, S3 do 100% 2000 c/h ]- thrustor with the brake spring and electromagnet (maintains the piston in its upper position
while cutting off supply of the thrustor motor) [ type of work S1, S3 40% 600 c/h ]38 V DC electromagnet supply voltage, current intensity of 0,4 A.
/ S1- continuous work; S3- intermittent work /
The ZE type thrustors can be made with delay valves: P- lifting, O- lowering, T- lifting and lowering [operating modeS1, S3 40% 600 c/h]. Example of designation of the brake with parameters as in the example above in the versionwith a thrustor with a valve delaying P lifting:
250-ZE P 500/50 S500. 400 V AC / 50 Hz- 264 AHH Shoe Brake
We also offer AHT holding brakes, AHG mining brakes, AHHC weight brakes and special versions acc. tospecific customer needs.
0
couple of additional holes
wear of lining indicator -only with thrustors type ZE
-
7/28/2019 Katalog Fena Eng All
41/62
TECHNICAL CHARACTERISTICS
Brake drumdiameter
DH
Brakingmoment
MH
Thrustor type Thrustor supply**Brake weight with
thrustor ***Brake size and type
mm Nm - V / Hz kg -
120 20w50 EB 120-40/2 230w690 V AC/50Hz 21 261 AHH
50w100 EB 12/50 C22 230 V AC / 50 Hz 26
16080w160
ZE 500/50 S 320ZEW 500/50 S 320
*ZEM 500/50 S 320
400 V AC / 50 Hz
500 V AC / 50 Hz31
262 AHH
200 90w190
ZE 500/50 S 320ZEW 500/50 S 320
*ZEM 500/50 S 320
230 V AC / 50 Hz400 V AC / 50 Hz500 V AC / 50 Hz
44 263 AHH
250 190w365
ZE 500/50 S 500ZEW 500/50 S 500
*ZEM 500/50 S 500
230 V AC / 50 Hz400 V AC / 50 Hz500 V AC / 50 Hz
52 264 AHH
320 310w590
ZE 500/50 S 500ZEW 500/50 S 500
*ZEM 500/50 S 500
230 V AC / 50 Hz400 V AC / 50 Hz500 V AC / 50 Hz
85 265 AHH
400 580w1160
ZE 1250/60 S 800ZEW 1250/60 S 800
*ZEM 1250/60 S 800
230 V AC / 50 Hz400 V AC / 50 Hz500 V AC / 50 Hz
98 266 AHH
1000w1570 ZE 1500/60 S 1250ZEW 1500/60 S 1250
230 V AC / 50 Hz400 V AC / 50 Hz500 V AC / 50 Hz
156
500
1600w2500
ZE 2500/60 S 2000ZEW 2500/60 S 2000
*ZEM 2500/60 S 2000
230 V AC / 50 Hz400 V AC / 50 Hz500 V AC / 50 Hz
168
267 AHH
630 2300w4000
ZE 2500/60 S 2000ZEW 2500/60 S 2000
*ZEM 2500/60 S 2000
230 V AC / 50 Hz400 V AC / 50 Hz500 V AC / 50 Hz
255 268 AHH
710 3100w5000
ZE 2500/60 S 2000ZEW 2500/60 S 2000
*ZEM 2500/60 S 2000
230 V AC / 50 Hz400 V AC / 50 Hz500 V AC / 50 Hz
354 269 AHH
800 4800w7000
ZE 3200/80 S 2500ZEW 3200/80 S 2500
*ZEM 3200/80 S 2500
230 V AC / 50 Hz400 V AC / 50 Hz500 V AC / 50 Hz
440 270 AHH
* - when utilising the ZEM type thrustors it is necessary to provide electromagnet supply (38 V DC, current
intensity of 0,4 A, for ZEM 500, ZEM 800, ZEM 1500 thrustor / and 0,8 A /for ZEM 2500, ZEM 3200 thrustor/),
** - thrustor with different voltage rating and frequency can be made after consultation
*** - brake weight with oil thrustor
DIMENSIONS
Brake shoewidth
BH H1 H2 b b1 b2 b3 a a1 a2 c d f
Brake sizeand type
mm -
40 110 320 350 55 160 115 343 75 105 110 50 14 12 261 AHH
50 130
420*
457
430*
505 80 190 145
395*
375 75 120
162*
180 60 14 12 262 AHH
70 180 470 505 95 140 190 405 90 130 180 60 18 15 263 AHH
90 220 515 575 120 170 215 440 120 160 180 80 18 15 264 AHH
110 250 585 600 160 220 280 515 140 190 180 80 18 20 265 AHH
140 300 680 690 200 250 315 593 170 220 210 80 18 25 266 AHH
180 360 820 830 250 280 380 673 200 270210*
25480 22 25 267 AHH
225 450 1025 1035 325 280 475 762 230 300 254 100 22 30 268 AHH
255 500 1210 1220 370 365 500 892 260 320 254 100 23 30 269 AHH
280 560 1275 1285 400 400 580 960 280 360 254 120 33 40 270 AHH
* - 262 AHH size: dimensions of the brake with the EB 12/50 C22 thrustor
267 AHHsize: dimensions of the brake with the ZE 1500/60 S 1250 and ZEW 1500/60 S 1250 thrustor
We also produce brakes with other parameters and special versions.
1
-
7/28/2019 Katalog Fena Eng All
42/62
Fabryka Elementw NapdowychFENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
AHG MINING BRAKES / 200 series /with the ExZE or ExZEM explosion-proof electrohydraulic thrustors
Example of designation ofthe AHG mining brake type shoe brake with the drum diameter ofDH=250 with
the ExZE 800/60 r1 S450.500 V AC / 50 Hz explosion-proof electrohydraulic thrustor (thrustor with opencontact and bimetal breaker), size of 264:
250-ExZE 800/60 r1 S450.500 V AC / 50 Hz- 264 AHG Shoe Brake
Prod. sheet No.
51 AHG06.2006
Brake material: ductile cast iron; steel; stainless steel pins; thrustor body - cast iron;brake linings approved for usein underground mining excavations free of methane and with the presence of methane in premises classified as a,b or c of explosion hazard.
Application: The two-shoe radial brakes with the explosion-proof electromagnetic thrustor of the ExZE type are
designed for operation with brake drums on their external face. They are applied in the drives of: vcranes,
vconveyors v transport and handling machines.Working conditions: The explosion-proof thrustor with flameproof casing and intrinsically safe signal circuits isintended for work in underground mining excavations of the mines exposed to methane and coal dust explosion(group I category M2) as well as in premises and outdoors (group II category 2G) in the T4 temperature class,
4TBII/IdxEEG2II/2MI
at the ambient temperature of -20C to +40C and relative humidity of up to 95%. The thrustor is provided with oil-tight casing with a terminal box with the IP 54 protection class. When working outdoor, it is recommended to coverthe brake against direct rainfall. Basically, the brake is designed for work in the horizontal position (the base is fittedto the horizontal surface). Work in the position deflected from vertical position is possible only after consultation withthe manufacturer.
Thrustor:The thrustor is provided with normally closed contact -ror normally open contact -z, that can be used to indicate theupper piston rod position. It also features thermal protection in form of a bimetal breaker - 1 or incremental sensor -2, protecting the thrustor from oil overheating.
Operation: S1, S3 up to 100% 2000c/h.
2
couple of additional holes
-
7/28/2019 Katalog Fena Eng All
43/62
TECHNICAL CHARACTERISTICS
Brake drumdiameter
DH
Brakingmoment
MH
Thrustor type Thrustor supply**Brake weight with
thrustor ***Brake size and type
mm Nm - V / Hz kg -
200 170w360 ExZE 800/60.... S450 230 V AC / 50 Hz 81 263 AHG
250 210w400 ExZE 800/60.... S450 400 V AC / 50 Hz 95 264 AHG
320 320w600 ExZE 800/60.... S450 500 V AC / 50 Hz 107 265 AHG
400 580w1160 ExZE 1250/60.... S800 660 V AC / 50 Hz*** 135 266 AHG
1000w1500 ExZE 1500/60.... S1250 1000 V AC / 50 Hz*** 198500
1600w2500 ExZE 2500/60.... S2000 205
267 AHG
630 2300w4000 ExZE 2500/60.... S2000 292 268 AHG
710 3100w5000 ExZE 2500/60.... S2000 390 269 AHG
800 4800w7000 ExZE 3200/80.... S2500 473 270 AHG
* - brake with other brake drum diameter can be made on request** - dotted place for connector type designation and thermal protection type (see thrustor description)
*** - special version
**** - brake weight with thrustor with oil
DIMENSIONS
Brake shoewidth
BH H1 H2 H3 b b1 b2 b3 b4 a a1 a2 c d f
Brake sizeand type
mm -
70 180 518 578 -32 95 140 190 530 75 90 130 232 60 18 15 263 AHG
90 220 528 588 -22 120 170 215 550 55 120 160 232 80 18 15 264 AHG
110 250 585 645 -17 160 220 280 615 40 140 190 232 80 18 20 265 AHG140 300 680 685 15 200 250 315 655 40 170 220 232 80 18 25 266 AHG
180 360 820 825 37 250 280 380 750 50 200 270 270 80 22 25 267 AHG
225 450 1025 H1 126 325 280 475 825 50 230 300 270 100 22 30 268 AHG
255 500 1210 H1 177 370 365 500 954 50 260 320 270 100 23 30 269 AHG
280 560 1275 H1 206 400 400 580 1019 60 280 360 270 120 33 40 270 AHG
We also produce brakes with other parameters and special versions.
-
7/28/2019 Katalog Fena Eng All
44/62
Fabryka Elementw NapdowychFENA sp. z o.o.40-525 Katowice, ul. Kociuszki 191; tel./fax +48 (0)32 251 9246, +48 (0)32 251 2788
www.fena.pl SALES AND TECHNICAL DEPARTMENT: tel/fax +48(0)32 245 1755; +48(0)32 245 1715, e-mail: [email protected]
AHM SHOE BRAKES / 200 series /with DZEMz type electromagnetic thrustor
Example of designation ofthe AHM type shoe brake with the drum diameter of DH=200, size of 263 with
DZEMz 10 type electromagnetic thrustor, intended for S3 intermittent work rated 500V/ 50Hz:200-DZEMz 10-S3-500 V AC/50 Hz- 263 AHM Shoe Brake
Prod. sheet No.
50 AHH06.2006
Application: Shoe brakes with the electromagnetic thrustor of the DZEMz type are designed for operation withbrake drums on their external face. They are applied in the drives of cranes and other equipment.
Working conditions: The brake is designed for work in moderate climate, on the ground, at the temperature of
-15oC to +35oC. When working outdoor, it is recommended to cover the brake against direct rainfall. The thrustorprotection class IP40.
Basically, the brake is designed for work in the horizontal position (the base is fitted to the horizontal surface).
Work in the position deflected from vertical position is possible only after consultation with the manufacturer.)
Thrustor:
The thrustor is intended forS3-40 intermittent work
detail X
for size 265 AHM
xing construction
for size 261 AHM
-
7/28/2019 Katalog Fena Eng All
45/62
TECHNICAL CHARACTERISTICS
Brake drumdiameter
DH
Brakingmoment
MH
Type of thrustor Thrustor supply* Brake weightwith thrustor
Brake size and type
mm Nm - V / Hz kg -
120 20w30 DZEMz 0
230 V AC / 50 Hz
400 V AC / 50 Hz
500 V AC / 50 Hz
24,5 261 AHM
160 63w100 DZEMz 10
230 V AC / 50 Hz
400 V AC / 50 Hz
500 V AC / 50 Hz
39 262 AHM
200 125w140 DZEMz 10
230 V AC / 50 Hz
400 V AC / 50 Hz
500 V AC / 50 Hz
52 263 AHM
250 220w320 DZEMz 30
230 V AC / 50 Hz
400 V AC / 50 Hz
500 V AC / 50 Hz
97 264 AHM
320 400w600 DZEMz 30
230 V AC / 50 Hz
400 V AC / 50 Hz
500 V AC / 50 Hz
117 265 AHM
* - thrustor with different voltage rating and frequency can be made when agreed upon
DIMENSIONS
Brake shoewidth
BH H1 H2 b b1 b2 b3 a a1 a2 a3 c d f
Brake sizeand type
mm
40 110 250 300 55 290 155 375 105 145 197 60 50 13 13 261 AHM
50 130 320 411 80 297 160 407 110 150 250 50 50 13 10 262 AHM
70 180 385 411 95 328 205 465 90 130 250 50 60 18 16 263 AHM
90 220 463 652 120 350 260 530 120 160 340 50 80 18 18 264 AHM
110 250 585 650 160 528