Kaplan turbine
-
Upload
lecramyajiv -
Category
Education
-
view
2.397 -
download
3
description
Transcript of Kaplan turbine
![Page 1: Kaplan turbine](https://reader036.fdocuments.us/reader036/viewer/2022082503/5583a76bd8b42aff058b4755/html5/thumbnails/1.jpg)
Kaplan turbine
Presented by
Vijay Marcel D
I year M.Tech(R.E)
![Page 2: Kaplan turbine](https://reader036.fdocuments.us/reader036/viewer/2022082503/5583a76bd8b42aff058b4755/html5/thumbnails/2.jpg)
Kaplan Turbine
• Invented by Prof. Viktor Kaplan of Austria during 1913 – 1922.• The Kaplan is of the propeller type, similar to an airplane
propeller.• The difference between the Propeller and Kaplan turbines is that
the Propeller turbine has fixed runner blades while the Kaplan turbine has adjustable runner blades.
• The kaplan's blades are adjustable for pitch and will handle a great variation of flow very efficiently.
• The kaplan turbine, unlike all other turbines, the runner's blades are movable.
• The application of Kaplan turbines are from a head of 2m to 30m.
![Page 3: Kaplan turbine](https://reader036.fdocuments.us/reader036/viewer/2022082503/5583a76bd8b42aff058b4755/html5/thumbnails/3.jpg)
Comparison with other turbines• Pelton turbines are tangential flow impulse turbines
operate above a head of 200m and low discharge. low specific speed of 8.5 to 30 for single jet and 30 to 51 for two or more jets.
• Francis turbine is a mixed flow reaction turbine operate under a head of 30 to 200m and medium discharge specific speed of 51 to 255.and has minimum slow rate
• Kaplan turbine is axial flow reaction turbine operate under a head of 2 to 30m and large discharge. a high specific speed of 255 to 860.
![Page 4: Kaplan turbine](https://reader036.fdocuments.us/reader036/viewer/2022082503/5583a76bd8b42aff058b4755/html5/thumbnails/4.jpg)
Major Parts of A Kaplan Turbine
![Page 5: Kaplan turbine](https://reader036.fdocuments.us/reader036/viewer/2022082503/5583a76bd8b42aff058b4755/html5/thumbnails/5.jpg)
Parts of kaplan turbine
• The main part of kaplan turbine are
• Scroll casing
• Guide vanes mechanism
• Runner of turbine
• Draft tube
![Page 6: Kaplan turbine](https://reader036.fdocuments.us/reader036/viewer/2022082503/5583a76bd8b42aff058b4755/html5/thumbnails/6.jpg)
• Scroll casing:The water from penstock enters scroll casing and surrounds the runner.It provides an even distribution of water around the circumference of the turbine runner maintaining the constant velocity for the water distributed
• Stay ring:The function of stay ring is to direct the water from scroll casing to guide vanes.
• Guide vanes:The guide vanes direct the water at an appropriate angle and regulates the quantity of water supplied to the runner
• Runner blades:The blades are attached to the hub and so shaped that water flows axially through the runner
![Page 7: Kaplan turbine](https://reader036.fdocuments.us/reader036/viewer/2022082503/5583a76bd8b42aff058b4755/html5/thumbnails/7.jpg)
Draft tube:• A Draft tube connects the runner exit to tail race.
• It is a pipe of gradually increasing area used for discharging water from exit of turbine to tail race.
• By using draft tube, the kinetic energy rejected at the outlet of turbine is converted to useful pressure energy.
• The turbine may be placed above the tail race and hence it can be inspected properly.
![Page 8: Kaplan turbine](https://reader036.fdocuments.us/reader036/viewer/2022082503/5583a76bd8b42aff058b4755/html5/thumbnails/8.jpg)
Types of Draft tubes:
The following are the important type of draft tube which is used are
a. Conical draft tubes
b.Single elbow tubes
c. Moody spreading tubes and
d.Elbow draft tube with circular inlet and rectangular outlet.
• The conical draft tubes and moody spreading draft tubes is more efficient.
![Page 9: Kaplan turbine](https://reader036.fdocuments.us/reader036/viewer/2022082503/5583a76bd8b42aff058b4755/html5/thumbnails/9.jpg)
Operation of kaplan turbine• The water from the penstocks enters the scroll casing
and then moves to the guide vanes.
• From the guide vanes, the water turns through 90° and flows axially through the runner.
• For Kaplan Turbine, the shaft of the turbine is vertical. The lower end of the shaft is made larger and is called ‘Hub’ or ‘Boss’.
• The vanes are fixed on the hub and hence Hub acts as runner for axial flow turbine.
![Page 10: Kaplan turbine](https://reader036.fdocuments.us/reader036/viewer/2022082503/5583a76bd8b42aff058b4755/html5/thumbnails/10.jpg)
Important parameters for kaplan turbine
• The peripheral velocity at inlet and outlet are equal u1=u2= ∏DoN/60 were Do is outer dia of runner
• Velocity of flow at inlet and outlet are equal
Vf1=Vf2
• Area of flow at inlet = area of flow at outlet
A = (∏/4)(Do2-Db
2) ,Db is diameter of hub• Specific speed of kaplan turbine is given byNs = N√P/H5/4 were P is shaft power in KW• Discharge Q=A*Vf1
• Overall efficiency is given by ηo=P/(ρ*g*Q*H/1000)
![Page 11: Kaplan turbine](https://reader036.fdocuments.us/reader036/viewer/2022082503/5583a76bd8b42aff058b4755/html5/thumbnails/11.jpg)
Thank you