RFID UHF/HF/LF Keyfob---ABS/EPOXY/PVC EPOXY/PET EPOXY/PC/PVC/EPOXY RFID HF/LF Keyfob
Kane Ace™ MX - Kaneka Belgium - Home · Kane Ace™ MX Liquid Epoxy Toughener Benefits New Grade...
2
Kane Ace™ MX Liquid Epoxy Toughener Benefits New Grade MX-170 for Composites Liquid Epoxy Toughener based on Core-Shell Rubber Technology Kane Ace TM MX is a concentrate of core shell rubber (CSR) toughening agent in liquid epoxy resin. The CSR remains uniformly dispersed under normal handling, formulating and curing conditions. Fracture toughness Extra advantages of MX-170: Lap shear / T-peel strength Maintenance of flexural modulus Fatigue resistance More transparent than conventional grades No Tg depression Consistent morphology Wide cure window 100nm particles Core: Rubber Shell: Co-polymer compatible with epoxy resin
Transcript of Kane Ace™ MX - Kaneka Belgium - Home · Kane Ace™ MX Liquid Epoxy Toughener Benefits New Grade...
Kane Ace™ MXLiquid Epoxy Toughener
Benefits New Grade MX-170 for Composites
Liquid Epoxy Toughener based on Core-Shell Rubber Technology
Kane AceTM MX is a concentrate of core shell rubber (CSR) toughening agent in liquid epoxy resin.
The CSR remains uniformly dispersed under normal handling, formulating and curing conditions.
Fracture toughness Extra advantages of MX-170:Lap shear / T-peel strength Maintenance of flexural modulusFatigue resistance More transparent than conventional gradesNo Tg depression Consistent morphology Wide cure window
100nm particles
Core: Rubber
Shell: Co-polymer compatible with epoxy
resin
Kane Ace™ MXLiquid Epoxy Toughener
Performance
HIGH PERFORMANCE POLYMERS DIVISION - Kane Ace™ MX
Tel +32 (0) 14 25 78 74Email:[email protected]
www.kaneka.beKANEKA BELGIUM NVNijverheidsstraat 16B-2260 WesterloBelgium
Dispersion StabilityCSR dispersion is very stable even in di�erent cure conditions. Bisphenol-A epoxy cure in various conditions:
Amine Cure, 200°C Amine Cure, 60°C Phenolic Cure, 190°C(CSR 5%) (CSR 15%) (CSR 3%)
Toughness and Tg T-peel strengthFracture toughness is remarkably improved T-peel strength is increased without reduction of Tg. with CSR content.
0.5µm0.5µm 0.5µm 0.5µm0.5µmFracture Toughness of Bisphenol-A Epoxy/Kane AceTM MX
T-Peel Strength of Bisphenol-A Epoxy/Kane AceTM MX
170
180
190
200
0
100
200
300
400
500
0% 1% 5% 10%
Tg (o
C)
Frac
ture
Tou
ghne
ss (J
/m2)
CSR Amount
Tg
0
1
2
3
4
5
6
CSR 0% CSR 5% CSR 10%
T-Pe
el S
tren
gth
(kN
/m)
FR-MSM-TD007-E2 - 30th August 2013
