KAN - Commission for Occupational Health and Safety and Standardisation Eckhard Metze Head of the...
-
Upload
barnard-crawford -
Category
Documents
-
view
214 -
download
0
Transcript of KAN - Commission for Occupational Health and Safety and Standardisation Eckhard Metze Head of the...
KAN - Commission for Occupational Health and Safety and Standardisation
Eckhard MetzeHead of the Employers OfficeSankt Augustin, 05 December 2013
Standards determine our everyday life. At home…
05 December 2013Visit of the Slovene delegation Seite 2
05 December 2013
Is standardisation important for OH&S?
Machinery Directive 2006/42/EC“Member States shall take the appropriate measures to enable the social partners to have an influence at national level on the process of preparing and monitoring the harmonised standards”
Conclusion: Member states are responsible for supporting the access of the social partners to the standardisation process at national level
Page 4Visit of the Slovene delegation
Seite 5
Personal Protective Equipment Directive (89/686/EEC)
“Member States shall ensure that by 30 June 1991 appropriate steps are taken to enable both sides of industry to have an influence at national level on the process of formulating the harmonized standards and keeping them under review.”
Conclusion: Standardisation is an important instrument of prevention supporting the European directives
05 December 2013Visit of the Slovene delegation
Foundation of KAN
Created in 1994 Financed by the Association for the Promotion of
Occupational Safety in Europe (VFA) and the Federal Ministry of Labour and Social Affairs
KAN’s work is supported by the KAN Secretariat
Page 605 December 2013Visit of the Slovene delegation
Commission: OSH + standardisation
Statutory accident
insurance institutions
DGUV/ VFA
DIN
© Picture: Pixel, Fotolia.com Page 7
Employers
Employees
05 December 2013Visit of the Slovene delegation
Commission: OSH + standardization
DIN
Employees
Statutory accident
insurance institutions
DGUV/ VFA
5
5
5
1
1
2 3
© Pictures: AKS, Fotolia.com
KAN
Page 8
Employers
05 December 2013Visit of the Slovene delegation
OH&S position is needed
DIN
Employers
TC
WG
TC
WG
© Pictures: Pixel, Dark Vectorangel, masterzphotofo, Fotolia.com Page 9
Employees
Statutory accident
insurance institutions
DGUV/ VFA
05 December 2013Visit of the Slovene delegation
Written comment to DIN (+ KAN members)
05 December 2013
DIN
TC
WG
TC
WG
© Pictures: Pixel, coramax, Fotolia.comVisit of the Slovene delegation Page 10
Employees
Employers
Statutory accident
insurance institutions
DGUV/ VFA
05 December 2013
KAN: Activities
Studies, projects and expert reports to analyse particular areas of standardisation
Analysis of standards for OH&S contents and identification of shortcomings
Exchange of information with experts
Seminars and conferences to facilitate information and an exchange of experience
Visit of the Slovene delegation Page 11
Print media by KAN
KAN Reports KAN Brief
(8.000 subscribers in 60 countries)(Languages: D, E, F, I, PL)
Leaflets
05 December 2013Visit of the Slovene delegation Page 12
Forestry Machinery KAN-Report commissioned: „Safety of forestry machinery“
- Recommendation to revise the standards- Mirror Committee necessary!
Mirror Committee has been installed by DIN in Nov. 2012big interest even by manufacturers
„New strong voice in standardization“
(Articel in newspaper of wood-industry (17.8.2012)
05 December 2013Visit of the Slovene delegation Page 13
Electronic media by KAN
NoRA OS & H standards search tool
(www.kan.de)
05 December 2013Visit of the Slovene delegation Page 14
Ergonomics tuition modules (free of charge) http://www.ergonomics-teaching.eu
05 December 2013Visit of the Slovene delegation Page 15
05 December 2013Visit of the Slovene delegation Seite 16
Standards are efficient tools for prevention
Slicing machine
05 December 2013Visit of the Slovene delegation Seite 17
Accidents with slicing machines in Germany
1990: 4,840 cutting accidents occurred in Germany with slicing machines.
14% of the accidents happened during cleaning of the machine.
Minor technical changes in DIN EN 1974 (e.g. protector ring next to circular cutting blade).
2000: reduction of accidents > 50%
05 December 2013Visit of the Slovene delegation Seite 18
Flat weighing machine for vehicles
Risks constrained posture mold fungus, bacteria … rescue difficult
EC directive dealing with accuracy no safety requirements
Solution additional standard DIN supports initiative
Study on „biomechanical load limits“
„Until the pain treshold“Handelsblatt, 8.4.13
05 December 2013Visit of the Slovene delegation Page 19
ContactEckhard MetzeCommission for Occupational Health and Safety andStandardisation (KAN)SecretariatAlte Heerstraße 11153757 Sankt Augustin
Tel.: 02241 231-3452Fax: 02241 [email protected] www.kan.de