KADVCAAA30A

USER MANUAL

TABLE OF CONTENTS

1 Components of the video camera…………………………………………………………………3

2 Preparations before taking pictures ………………………………………………………………4Installing the batteries………………………………………………….........……………………4Inserting the memory card……………………………………......………………………………4Formatting the memory card………………………………….......………………………………4Setting language……………………………………………......…………………………………4LCD screen ……………………………………………….................................…………………5

3 Basic operations …………………………………………………….……………………………7Turning on and off the video camera……………………….........….……………………………7Mode change……………………………………………….......................………………………7Video recording………………………………………………………….……..........……………8How to use the self-timer and continuous shooting functions…………….….......………………8Taking pictures…………………………………………………………….…...........……………8Audio recording ………………………………………………………….........…………………8

4 Setting the video camera…………………………………………………….……………………9Menu for picture shooting mode …………………………………………........…………………9Menu for video recording mode…………………………………………..........…………………9Setting the menu……………………………………………………….........……………………10

5 Playback……………………………………………………………….…………………………11Video playback……………………………………………………….......………………………11Picture playback…………………………………………………….........………………………11Audio playback………………………………………………………..........……………………11Other functions under playback mode……………………………….......………………………11

6 Connections…………………………………………………………...…………………………12Connecting the video camera to TV…………………………………......………………………12Downloading images to the computer……………………………….......………………………12Using the card reader………………………………………………….........……………………12Connecting the video camera to computer through USB line……….......………………………12

7 Software installation…………………………………………………..…………………………13Software installation…………………………………………………..........……………………13Installing the PC camera drive………………………………………......………………………13How to use the PC camera functions………………………………........………………………13

8 Technical parameters……………………………………………….……………………………13

Thank you for purchasing this Kogan digital video camera. Before using, please read this Manual carefully and keep it handy for future reference.

Safety information

Before operating the video camera, please make sure that you have perused and understand the following safety measures. ● Please do not try to open the outer casing of the camera or change the camera in any way. Only authorized Kogan technicians

may repair this video camera.● When operating, please keep the camera away from water or other liquids; do not use the camera with wet hands. Never use this

unit in rain or snow. Wetness may lead to electric shock. ● Only use the recommended power auxiliaries. The use of non-recommended power sources may lead to overheating, equipment

deformation, fire and electric shock etc.

2

1. Components of the video camera1: Display key

2: LED key

3: Mode key

4: Power key

5: Menu key

6: Up key

7: Work indicating light

8: SD card slot

9: Shutter key

10: USB interface

11: AV interface

12: Right/self-timer key

13: OK key

14: Down key

15: Left key

16: Loudspeaker

17: LCD screen

18: Wrist belt

19: Tripod

20: Battery cover

21: Self-timer indicating light

22: Lens

23: Microphone

24: Compensation light

3

2 Preparations before taking pictures

Installing the batteries

1: Open the battery cover.2: Install three No.7 alkaline batteries in the battery cabin; pay attention to the positive and negative ends of the batteries. 3: After installing the batteries, close the battery cover.

Inserting the memory card

There is no built-in memory in this camera and no pictures and image files can be saved. If you want to shoot the files for storing, please use SD or MMC card. Before inserting or taking out the card, please turn the camera off first. Before inserting the card, please ensure the memory card direction is correct. If you feel there is resistance, please do not forcibly insert the card. The memory card is provided with a write protection switch to avoid accidental deletion of the data. Therefore, if you want to save or delete files, please place the write protection in off status.

1: Place the camera in off status.2: At the end of the camera, there is a rubber cover for SD card; open this cover you will see the SD card slot.3: Insert the memory card as shown in the sketch.4: Close the SD rubber cover.

● To take out the memory card, slightly press the edge of the memory card, then release, the card will be ejected out.

Formatting the memory card When operating this camera for the first time, remember to format the memory card. By doing so, all the data already saved on the card will be deleted. Prior to formatting, please backup any important files. 1: Turn on the video camera, set the camera to setting menu.2: Press [up] or [down] key to choose [format], then enter the sub-menu for this function. 3: Press [up] or [down] key to choose [yes] then press [OK] key to format.

Setting the language

Before the first use of this video camera, you must select a language.1: Turn on the camera, set the camera to setting menu. 2: Press [up] or [down] key to choose [language], then enter the sub-menu for this function.3: Press [up] or [down] key to choose the language you want, then press [OK] key to confirm. 4: Finally press [menu] key to escape the setting interface.

4

LCD screen

Video recording mode

Picture taking mode

5

Video file size

HD 1280X720

720 720X480

640 640X480

320 320X240

Remaining recording

time

Memory card

Video recording mode

Battery capacity level

Image size8MB 3264X24485MB 2592X19443MB 2048X15362MB 1600X12001MB 1024X768

Exposure compensation value

White balance

Automatic

Daylight

Cloudy

Florescent

Tungsten light

Shooting mode

Battery capacity level

Memory card

No. of pictures can be taken

Audio recording mode

Playback mode

6

Audio recording mode

Time recorded

Battery capacity level Pause

Remaining time for recording

Memory card

Playback mode

Mark for locked file

Voice memorandum

File format

No. of current file/ total number of saved files

Memory card

Video file

Audio file

Image file

3 Basic operations

Turning video camera on and off

1: Turn on the LCD screen, press [power] key to turn on the camera. 2: Turn off the screen, turn off the video camera or press [power] key to turn off the video camera. To save the electricity, within due time after the last operation is done, the video camera powers off automatically. Only by pressing [power] key, you can turn on the camera. You can also set the automatic power off time by using the [automatic power off] function.

Mode change1: Press [power] key to turn on the video camera.2: Press [mode] key to change the recording mode of this camera; each time you press the key, the mode of the video camera will change for once.

Icon Mode Description

Video recording mode Recording video file

Picture shooting mode Shooting the still picture

Audio recording mode Recording the audio file

Playback mode Preview the recorded files

7

Video recording

1: Turn on the camera, set the video camera to video recording mode ．2: Press [shutter] to start recording the video and [right] key to pause; press [right] key again to resume the video recording. 3: Press [up] and [down] to zoom in and out.4: Press [shutter] key again to stop the recording. In the event of the memory card becoming full, the camera will automatically stop

the recording.

How to use the self-timer and continuous shooting functions Use self-timer to set the delayed time between the pressing of the shutter and shooting the picture.1: Turn on the video camera, set the camera to self-timer mode. 2: Press [menu] key to show the picture shooting menu.3: Press [up] or [down] key to select [shooting mode], then, press [right] or [OK] key to enter the sub-menu:

Turn off: normal shooting without time delay.

　 Self-timer 2 seconds: the release of shutter is delayed by 2 seconds.

　 Self-timer 10 seconds: the release of shutter is delayed by 10 seconds.

　 Continuous shooting: press the shutter once, three pictures will be taken continuously.

4: Press [up] or [down] key to select the shooting mode you want.5: Press [up] key to confirm the setting and press [menu] key to escape.6: Press [shutter] key to take picture.● You can directly press [right] key to change the shooting mode of the video camera. Each time you press [right] key, the

shooting mode of the camera will change for once.

Taking pictures

1: Turn on the video camera.

2: Set the video camera to picture shooting mode ( ).3: Take the image you need through the LCD screen, press [shutter] key to take picture.4: Press [up] and [down] keys to zoom in and out.● After each shooting, the number of shooting shown on the LCD screen will reduce by 1 automatically. For instance, if the

number shown on the LCD screen is 18, then, after next shooting, the number shown will be 17. If the memory of the memory card is full, then “insufficient memory” will be shown on the LCD screen.

● Do not shut out the lens with finger or wrist belt when shooting.● In case the light is insufficient, press [LED switch] key to turn on the LED light.

Audio recording

1: Turn on the camera, set the video camera to audio recording mode .2: Press [shutter] to start recording the audio and [right] key to pause; press [right] key again to resume the audio recording.3: Press [shutter] key again to stop the recording. In case the memory of the memory card is full, the camera will automatically stop

the recording.● There is no menu for audio recording.

8

4 Setting the video camera

When the menu is shown, use [up], [down], [left] and [right] keys to set. There is no menu for audio recording mode.

Menu for picture shooting mode1: Turn on the video camera and set the camera to picture shooting mode. 2: Press [menu] key to show the picture shooting mode menu.3: Press [up] or [down] key to select the item to be set.4: Press [right] or [OK] key to enter the sub-menu for the selected item.5: Press [up] or [down] key to set and confirm by pressing [OK] key.6: Press [menu] key to escape.

Menu for picture shooting

Menu item Available options and functions Image size Set the size of the image and there are 5 options for selection: :

8M[3264X2448]/5M[2592X1944]/3M[2048×1536]/2M[1600X1200]/1M[1024X768];

Image quality

The low quality image reduces the memory space used, meaning that more pictures may be taken. There are three options for image quality: [excellent], [good] and [normal].

Photometry mode

There are three photometry modes: [Central photometry]: taking the central part as the keystone to carry out photometry.[Multi-point photometry]: carry out the photometry for many points to make a comprehensive judgment. [Point photometry]: only carry out photometry for the central part then make the judgment.

White balance

Adjust the white balance to adapt to various light sources. There are 5 options for white balance: [automatic],

[daylight],[cloudy],[florescent light],[tungsten light].Exposure Manually set the exposure compensation value to make compensation under special

light such as indoor light condition, back to the light or strong light condition. The exposure compensation range is between -2.0 and 2.0.

Shooting mode

There are 4 shooting modes for this video camera: [close]/[self-timer 2s]/[self-timer 10s]/[continuous shooting]

Special effect

Select a kind of special effect for the pictures.[Normal]/[black and white]/[revival]/[negative]/[red]/[green]/[blue].

Menu for video recording mode

1: Under the video recording mode, press [menu] key to show the video menu.2: Press [up] or [down] key to select an option, press [right] or [OK] key to enter the sub-menu for such option. 3: Press [up] or [down] key to set, press [OK] key to confirm the setting. 4: Press [menu] key to escape.

Menu item Available options and functions Video format Selecting lower resolutions will result in the recording time being longer due to

memory restrictions. There are 4 options: [1280X720]/[720X480]/[640X480]/[320X240]．

Frame rate With the same memory space, selecting a lower frame rate will result in the recording time being longer. There are 2 options: [high]/[low]．

Photometry mode

Altering how bright/dark the images are due to exposure settings.

White balance To balance colours, so that your pictures do not get unnatural hues.

9

Setting menu

You may set the system items by setting menu.1: Turn on the video camera, press [menu] key to show the menu.

2: Press [right] key to select 3: Press [up] or [down] key to select the option to be set. 4: Press [right] or [OK] key to enter the sub-menu for this item. 5: Press [OK] key to confirm, press [menu] key to close the menu.

Menu item Available options and functionsSound There are 4 options for this function:

[Shutter]: press [right] key to turn on/off the shutter sound. [Turn on sound]: press [right] key to set the sound for turning on. There are 4 options:

[1]/ [2]/ [3]/ [no].[Key pressing sound]: press [right] key to turn on/off the key pressing sound.[Volume]: press [right] key to set the sound volume. There are 4 options: [0] / [1] / [2]/ [3].

Power frequency

Based on the region you live, the power frequency shall be set to 60 HZ or 50HZ accordingly.

Automatic power off

To save electricity, this video camera will automatically power off if it is not actively used within a certain time. There are 4 options for this function: [1 minute]/[3 minutes]/[5 minutes]/[power off]

Language Select a language from the following to show the menu and other information: [English], [simplified Chinese].

TV The image displayed on the screen of the video camera may also be displayed on TV screen. Based on the location you live, the TV output shall be set to NTSC or PAL.[NTSC]: For use within the US, Japan and others.[PAL]: Australia, New Zealand, China, Europe and others.

USB When connected to the computer, this video camera can be used as a portable hard disc or PC camera. [movable hard disc]/[PC camera].

Formatting Formatting will permanently delete all the data in the memory card or built-in memory, including the locked files. Before formatting, please backup the important files. [Yes]/[no].

Restoring the initial setting

The entire menu and key setting will be restored to the initial status. [Yes]/ [no].

10

5 Playback

Video playback1: Set the video camera to playback mode. 2: Press [left] or [right] key to select the video file you want to play.3: Press [shutter] key to play. Press [up] key to pause and press it again to resume. Press [right] key to quick forward and [left] key to

quick back the video.

Picture playback1: Set the video camera to playback mode. The lastly recorded file will be shown on the LCD screen. If there is no file in the

memory card, “no file” will be shown on the LCD screen. 2: Press [left] or [right] key to browse the previous or next image.

Audio playback1: Set the video camera to playback mode.2: Press [left] or [right] key to select the audio file you want to play.3: Press [shutter] key to start the playing. Press [up] key to pause and press it again to resume. Press [right] key to quick forward and

[left] key to quick back the audio.4: Press [menu] key to stop the playing.

Other functions under playback mode

Use the thumbnail Under playback mode, press [down] key to thumbnail file browsing mode. Press [up]/ [down]/ [left]/ [right] key to select the file. Press [OK] key to the full screen browsing mode

Delete file Delete file by using the delete function in the playback menu. 1: Under playback mode, press [menu] key to enter the menu interface. 2: Press [up] or [down] key to select [file deletion].3: Press [right] key to enter the sub-menu: [Delete single file]: delete the current file; [delete all]: delete all the files. 4: Press [up] or [down] key to select the option you want.5: Press [OK] key to enter the corresponding dialogue box for deletion; press [up] or [down] key to select [yes].6: Press [OK] key to confirm the deletion.

Menu under playback mode

1: Press [menu] key under playback mode to show the playback menu.2: Press [up] or [down] key to select the item you want and make the setting. 3: Press [right] key or [OK] key to enter the sub-menu for the item. 4: Press [OK] key to confirm the setting. 5: Press [menu] key to escape.

Menu item Available options and functions File locking Use this function to prevent the accidental file deletion.

[Locking/unlocking single]: lock or unlock the current file. [Locking all]: lock all the files.[Unlocking all]: unlock all the locked files.

File deletion For details, please refer to page 21.Slide playing Use this function to automatically play files.

[Start]: After setting the image playing direction and time interval, select to start the playing. Press [right] key to set the time interval between playing two files. [Interval]: 1s -10 s.[Circulating]: press [right] key to start or close circulating.

Special effect Select one special effect for the images: [black and white]/[revival]/[negative]/[red]/[green]/[blue]/[two value]/[sun set]/[warm color]/[cold color]/[comparison].

Swivel Use this function to swivel the images. [Swivel]: press [OK] key to select picture, each time you press, the picture will swivel for 90 degree in clockwise direction. [Save]: press [OK] to save the picture after swiveling. [Escape]: escape to the main menu.

Picture reducing

Use this function to reduce the size of picture thus reducing the memory occupied. It provides three options: [2048X1536]/ [1024X768]/ [640X480]．Note: the picture quality of large sized pictures may be reduced to smaller sizes; however the picture of small sized pictures cannot be enhanced

11

to bigger sizes. Audio memorandum

Use this function to add audio memorandum to pictures. [Add]: press [OK] key to start audio recording, press [shutter] key to stop. [Delete]: press [OK] key to delete the audio memorandum.

6 Connections

Connecting the video camera to TV

Upon being connected to TV, the LCD screen of the video camera will turn off and TV will play the function of the LCD screen of the camera. 1． Use the attached AV line to connect the TV with video camera. 2． Turn on video camera and TV, set the TV to “AV” mode. 3． When camera is set to picture shooting/video recording mode, you can browse the object to be shot on TV. 4． When the video camera is in playback mode, you can browse and play the recorded images, video and audio files.

Downloading the images to the computer

There are two ways to download the images from the memory card of the video camera to the computer:● Insert the SD card to the flash card reader● Use the attached USB line to connect the video camera to the computer.

Using the card reader

1: After the memory card is ejected from the video camera, insert the same to the card reader of the computer. 2: Open [my computer] or the windows resource manager, then double click the movable icon representing the memory card. 3: Copy the image from the memory card to the folder you selected in your computer.

Connecting the video camera to the computer through USB line

1: Connect the video recorder to the computer with USB line, turn on the camera. On the LCD screen, “MSDC” (movable hard disc” or “PC CAM” (PC camera) will be displayed. Press [mode] key to switch between “MSDC”/”PCCAM” modes.

2: Open [my computer] or the windows resource manager, then double click the movable icon representing the memory card. All the files are saved in a file named “DCIM”.

3: Copy the image from the folder of “DCIM” to the folder you selected in your computer.

12

7 Software installations

Software installation In the CD attached, there are drive programs and software for the video camera. Upon inserting the CD into the CD drive, the installation interface for software I will appear automatically.

If the automatic installation interface does not appear, open [my computer] or the CD drive of the browser, double click [autorun.inf], the automatic installation interface will appear. You can also click “operation”, then input the route; for instance “D: \autorun.exe” (supposing D is your CD drive), then click “OK”.

Installing PC camera function(1)Insert the CD into the CD drive. The automatic installation interface will appear on the screen. Click “driver”.(2) Copy the "PCCAM.exe" in CD-ROM to the desktop or a root directory you want.

How to use PC camera drive1. First, install the PC camera drive in the attached CD, use the USB line attached to connect the video camera to the computer,

turn on the camera. 2. Press [mode] key to set the camera to “PC CAM” mode. 3. Double click “Amcap” icon on the desktop. 4. If it is the first time you use PC camera, please click “preview” under “options” menu, then you can normally use the PC camera

function. 5. Select “Video Capture Pin” under “Options” menu, the size of PC camera window may be set.

8. Technical parameters photoreceptor 3 million pixel CMOSDisplay 2.7"TFT LCD screenFocus range 150cm～infinitude Aperture F: 3MM f=6.5mmShutter 1/6,000~1/20 second Definition Still picture: 8M(3264X2448);5M(2592x1944);

3M(2048×1536);2M(1600×1200);1M(1024×768)Video: 1280X720;720X480;640X480;320X240

Sensitivity Automatic White balance Automatic/daylight/cloudy/florescent light/tungsten light Exposure compensation

-2.0~2.0, taking 0.3 as interval

Continuous shooting IncludedPicture effect [Black and white]/[revival]/[negative]/[red]/[green]/[blue]/[two value]/[sunset]/

[warm color]/[cold color]/[comparison]Self-timer 2 seconds, 10 secondsMemory External: SD card, MMC cardTV system NTSC/PALPower 3 Alkaline batteriesAmbient temperature Operating temperature: ℃ to 40℃;storage temperature: 20℃ to 60℃Microphone Built-inLoudspeaker Built-inSize 118X55X55(mm)Weight Without batteries 190g, with batteries 220g

13