K1/K2 SMARTHOME DIY KIT - smanos · Included in Your K1/K2 Smart Home System Included in Your K1/K2...
Transcript of K1/K2 SMARTHOME DIY KIT - smanos · Included in Your K1/K2 Smart Home System Included in Your K1/K2...
K1/K2SMARTHOME DIY KIT
U S E R M A N U A L
EN DE ESFR PTNL IT
Contents1. Things to Note before Getting Started …………………………………………………………………4
2. How the K1/K2 System Works …………………………………………………………………………………5
3. Included in Your K1/K2 Smart Home System ………………………………………………………6
4. Device Overview …………………………………………………………………………………………….……8
5. Download the "smanos home" App …………………………………………………………………11
6. Add the K1/K2 System to the "smanos home" App ……………………………………………12
7. Set Up Your K1/K2 Smart Hub ………………………………………………………………………………12
8. K1/K2 Smart Hub Light Indicator Color Meaning ………………………………………………15
9. App Operation ………………………………………………………………………………………………………17
9.1 K1/K2 Main Page ……………………………………………………………………………………………18
9.2 Accessories Page ……………………………………………………………………………………………19
9.3 Customize Your Own Accessories …………………………………………………………………21
9.4 Setting Page ……………………………………………………………………………………………………23
10 . Recommended P lacements……………………………………………………………………28
11. Installation …………………………………………………………………………………………………………30
12. Reload the Batteries of Accessories ..…………………………………………………………...31
13. Z-Wave (Available only for K2 Hub)…………………………………………………………………...31
14. Specifications ………………………………………………………………………………………………………32
4
Things to Note before Getting StartedThank you for choosing smanos to help you take control of your home. The smanos family of Home Alarm Systems is designed to be self-monitored and help you become more active in securing your home without a high investment. We aim to provide a safe, easy & cost effective solution for you to protect your home & loved ones 24/7/365.
This system is an auxiliary system, it is not designed to provide complete protection from property loss. smanos will not be held responsible in the event that property loss occurs while this system is in operation.
High-speed WiFi Internet ConnectionOne critical factor that can affect the performance of your device is the position between your home WiFi router and the Hub. Set up your Hub in an open space (DO NOT place it directly on the floor); the closer the Hub is to the router, the stronger the WiFi signal will be.
Please be sure to connect you Hub to WiFi using the 2.4GHz spectrum as this is a larger spectrum and the Hub does not support the 5GHz option which has been found to be the most common mistake when setting up the your Hub for the first time.
SSID and Password- Check your WiFi network name and the password. The WiFi network name is normally referred to as the SSID. The password or security ID is normally the next line or two down from the WiFi/SSID network name. These can be easily found on your WiFi router if you did not change them when you first installed the WiFi router, for example:
- WiFi/SSID Network Name: XXXX
WiFi/SSID Network Password/Security Key: XXXXXXXXXXXXXX
Operating System Requirements- iOS 8.0 or above with iPhone 5 or above;
- AndroidTM 5.0 or above
5
How the K1/K2 System WorksHow the K1/K2 System Works
K1/K2 sends push notification to your phone
When Motion Sensor detects motion it sends signal to K1/K2 Hub
When Door/Window Sensor detects door/window opening, it sends signal to K1/K2 Hub
When K1/K2 Hub has been set to Arm Mode (The red indicator is on)
Through the “smanos home” app, put the system in Arm Mode (Please refer to System Statuses to see how)
Through the Keypad, put the system in Arm Mode(Please refer to System Statuses to see how)
K1/K2 sends signal to sound Indoor Siren at 104dB on-site
Through the Keypad, put the system in Arm Mode(Please refer to System Statuses to see how)
When K1/K2 Hub has been set to Arm Mode (The red indicator is on)
Through the “smanos home” app, put the system in Arm Mode (Please refer to System Statuses to see how)
When Door/Window Sensor detects door/window opening, it sends signal to K1/K2 Hub
K1/K2 sends signal to sound Indoor Siren at 104dB on-site
K1/K2 sends push notification to your phone
When Motion Sensor detects motion it sends signal to K1/K2 Hub
6
Included in Your K1/K2 Smart Home System Included in Your K1/K2 Smart Home System
The accessories in this kit are already paired with your K1/K2 Smart Hub.
K1/K2 Smart Hub x 1
- The heart of the system that receives, processes and sends signals from & to the wireless sensors.
MD-20 Pet Friendly Motion Sensor x 1
- A sensor that detects suspicious motion while ignoring motion from your furry little ones under 50 lbs / 23 kg.
SS-20 Indoor Siren x 1
- The siren will go off on-site, with a loud 104dB siren sound, to deter any would-be intruder after a sensor has been triggered.
KP-20 Security Keypad x 1
- A device with 4 non-numeric keys (password customizable directly on the app) that can be used to control the entire system.
DS-20 Door/Window Sensor x 2
- A sensor that detects the open/close status of a door or window being protected.
Mounting Base x 4
- Wall-mount bases for the K1/K2 Hub and wireless accessories (with corresponding model numbers on them.)
K1/K2 Hub Power Adapter
Double Sided Tape for the Hub/Motion/Siren/Keypad
Double Sided Tape for the Door/Window Sensor
Corner Mounting Bracket for the Motion Sensor
Screw set for the Hub/Motion/Siren/Keypad (optional – double sided
tape can also be used & is included)
Crowbar
K1/K2 Smart Hub x 1 - The heart of the system that receives, processes and sends signals from & to the wireless sensors.
MD-20 Pet Friendly Motion Sensor x 1
- A sensor that detects suspicious motion while ignoring motion from your furry little ones under 50 lbs / 23 kg.
SS-20 Indoor Siren x 1
- The siren will go off on-site, with a loud 104dB siren sound, to deter any would-be intruder after a sensor has been triggered.
KP-20 Security Keypad x 1
- A device with 4 non-numeric keys (password customizable directly on the app) that can be used to control the entire system.
The accessories in this kit are already paired with your K1/K2 Smart Hub.
7
Included in Your K1/K2 Smart Home System
The accessories in this kit are already paired with your K1/K2 Smart Hub.
K1/K2 Smart Hub x 1
- The heart of the system that receives, processes and sends signals from & to the wireless sensors.
MD-20 Pet Friendly Motion Sensor x 1
- A sensor that detects suspicious motion while ignoring motion from your furry little ones under 50 lbs / 23 kg.
SS-20 Indoor Siren x 1
- The siren will go off on-site, with a loud 104dB siren sound, to deter any would-be intruder after a sensor has been triggered.
KP-20 Security Keypad x 1
- A device with 4 non-numeric keys (password customizable directly on the app) that can be used to control the entire system.
DS-20 Door/Window Sensor x 2
- A sensor that detects the open/close status of a door or window being protected.
Mounting Base x 4
- Wall-mount bases for the K1/K2 Hub and wireless accessories (with corresponding model numbers on them.)
K1/K2 Hub Power Adapter
Double Sided Tape for the Hub/Motion/Siren/Keypad
Double Sided Tape for the Door/Window Sensor
Corner Mounting Bracket for the Motion Sensor
Screw set for the Hub/Motion/Siren/Keypad (optional – double sided
tape can also be used & is included)
Crowbar
DS-20 Door/Window Sensor x 2
- A sensor that detects the open/close status of a door or window being protected.
Mounting Base x 4
- Wall-mount bases for the K1/K2 Hub and wireless accessories (with corresponding model numbers on them.)
K1/K2 Hub Power Adapter
Crowbar
Double Sided Tape for the Hub/Motion/Siren/Keypad
Double Sided Tape for the Door/Window Sensor
Corner Mounting Bracket for the Motion Sensor
Screw set for the Hub/Motion/Siren/Keypad (optional – double sided
tape can also be used & is included)
8
Devices OverviewK1/K2 Hub Rear View
Devices Overview
* Anti-tampering protection ensures that any attempts to move the device results in an alarm and push notification.
Tampering Switch
K1/K2 Hub Rear View
MD-20 Motion Sensor Rear View SS-20 Indoor Siren Rear View
Slide to Open
Front View
Tampering Switch
DS-20 Door/Window Sensor Overview
Inside ViewRear View
LED Indicator LED Indicator
TamperingSwitch
LED Indicator
Pin
Pairing Button
SpeakerLED Indicator
Power PortPower ON/OFF
WiFi Button
Tampering Switch*
SpeakerLED Indicator
WiFi Button
Power ON/OFF
Tampering Switch* Pin
Pairing Button
Power Port
* Anti-tampering protection ensures that any attempts to move the device results in an alarm and push notification.
MD-20 Motion Sensor Rear View
Devices Overview
* Anti-tampering protection ensures that any attempts to move the device results in an alarm and push notification.
Tampering Switch
K1/K2 Hub Rear View
MD-20 Motion Sensor Rear View SS-20 Indoor Siren Rear View
Slide to Open
Front View
Tampering Switch
DS-20 Door/Window Sensor Overview
Inside ViewRear View
LED Indicator LED Indicator
TamperingSwitch
LED Indicator
Pin
Pairing Button
SpeakerLED Indicator
Power PortPower ON/OFF
WiFi Button
Tampering Switch*
LED Indicator
Tampering Switch
9
K1/K2 Hub Rear View
Front View Rear View Inside View
Devices Overview
* Anti-tampering protection ensures that any attempts to move the device results in an alarm and push notification.
Tampering Switch
K1/K2 Hub Rear View
MD-20 Motion Sensor Rear View SS-20 Indoor Siren Rear View
Slide to Open
Front View
Tampering Switch
DS-20 Door/Window Sensor Overview
Inside ViewRear View
LED Indicator LED Indicator
TamperingSwitch
LED Indicator
Pin
Pairing Button
SpeakerLED Indicator
Power PortPower ON/OFF
WiFi Button
Tampering Switch*
LED Indicator Slide to Open
Tampering Switch
SS-20 Indoor Siren Rear View
Devices Overview
* Anti-tampering protection ensures that any attempts to move the device results in an alarm and push notification.
Tampering Switch
K1/K2 Hub Rear View
MD-20 Motion Sensor Rear View SS-20 Indoor Siren Rear View
Slide to Open
Front View
Tampering Switch
DS-20 Door/Window Sensor Overview
Inside ViewRear View
LED Indicator LED Indicator
TamperingSwitch
LED Indicator
Pin
Pairing Button
SpeakerLED Indicator
Power PortPower ON/OFF
WiFi Button
Tampering Switch*
TamperingSwitch
LED Indicator
10
KP-20 Keypad Overview
Front View Rear View
Advice before Setting Up
Make installing easier and quicker by putting all the devices on a flat surface first. Check all options and how to set it up properly. Then install them on their assigned places.
Front View
KP-20 Keypad Overview
Rear View
Download the “smanos home” App
You can search “smanos home” in App Store or Google Play Store or scan the QR codes as below:
Sign Up/InIf you have not registered an account with smanos, please press “Sign up” just below the “Sign in” icon on the app, and follow the instructions to create your account first.
★ If you do not receive an account verification code in your email inbox during the registration process, please remember to check your spam/junk folder and make sure the notice has not been blocked by your service provider.
Once you have an account with us, please select the “Sign in” icon and enter your email address and password to log in.
LED Indicator TamperingSwitch
LED Indicators
* Non-numeric Keys are used to set the password for changing the status of K1/K2 system.
Four Non-numeric Keys * LED Indicators
Four Non-numeric Keys * LED Indicators Tampering
Switch
* Non-numeric Keys are used to set the password for changing the status of K1/K2 system.
Advice before Setting Up Make installing easier and quicker by putting all the devices on a flat surface first. Check all options and how to set it up properly. Then install them on their assigned places.
Advice before Setting Up
Make installing easier and quicker by putting all the devices on a flat surface first. Check all options and how to set it up properly. Then install them on their assigned places.
Front View
KP-20 Keypad Overview
Rear View
Download the “smanos home” App
You can search “smanos home” in App Store or Google Play Store or scan the QR codes as below:
Sign Up/InIf you have not registered an account with smanos, please press “Sign up” just below the “Sign in” icon on the app, and follow the instructions to create your account first.
★ If you do not receive an account verification code in your email inbox during the registration process, please remember to check your spam/junk folder and make sure the notice has not been blocked by your service provider.
Once you have an account with us, please select the “Sign in” icon and enter your email address and password to log in.
LED Indicator TamperingSwitch
LED Indicators
* Non-numeric Keys are used to set the password for changing the status of K1/K2 system.
Four Non-numeric Keys *
11
Devices OverviewYou can search “smanos home” in App Store or Google Play Store or scan the QR codes as below:
Advice before Setting Up
Make installing easier and quicker by putting all the devices on a flat surface first. Check all options and how to set it up properly. Then install them on their assigned places.
Front View
KP-20 Keypad Overview
Rear View
Download the “smanos home” App
You can search “smanos home” in App Store or Google Play Store or scan the QR codes as below:
Sign Up/InIf you have not registered an account with smanos, please press “Sign up” just below the “Sign in” icon on the app, and follow the instructions to create your account first.
★ If you do not receive an account verification code in your email inbox during the registration process, please remember to check your spam/junk folder and make sure the notice has not been blocked by your service provider.
Once you have an account with us, please select the “Sign in” icon and enter your email address and password to log in.
LED Indicator TamperingSwitch
LED Indicators
* Non-numeric Keys are used to set the password for changing the status of K1/K2 system.
Four Non-numeric Keys *
Sign Up/In If you have not registered an account with smanos, please press “Sign up” just below the “Sign in” icon on the app, and follow the instructions to create your account first.
* If you do not receive an account verification code in your email inbox during the registration process, please remember to check your spam/junk folder and make sure the notice has not been blocked by your service provider.
Once you have an account with us, please select the “Sign in” icon and enter your email address and password to log in.
Advice before Setting Up
Make installing easier and quicker by putting all the devices on a flat surface first. Check all options and how to set it up properly. Then install them on their assigned places.
Front View
KP-20 Keypad Overview
Rear View
Download the “smanos home” App
You can search “smanos home” in App Store or Google Play Store or scan the QR codes as below:
Sign Up/InIf you have not registered an account with smanos, please press “Sign up” just below the “Sign in” icon on the app, and follow the instructions to create your account first.
★ If you do not receive an account verification code in your email inbox during the registration process, please remember to check your spam/junk folder and make sure the notice has not been blocked by your service provider.
Once you have an account with us, please select the “Sign in” icon and enter your email address and password to log in.
LED Indicator TamperingSwitch
LED Indicators
* Non-numeric Keys are used to set the password for changing the status of K1/K2 system.
Four Non-numeric Keys *
12
Add the K1/K2 System to the “smanos home” AppAdd Device Press the “+” button on the Device List. Tap on [K1/K2 Smart Hub], then follow the configuration steps to set up your K1/K2 Hub with your home WiFi.
Add the K1/K2 System to the “smanos home” App Share Your Device to Family Accounts
Add DevicePress the “+” button on the Device List. Tap on [K1/K2 Smart Hub], then follow the configuration steps to set up your K1/K2 Hub with your home WiFi.
Tap on [ ] on the main page to enter the Account Menu.
By choosing “My Shares” on the menu and pressing the [ + ] button, you can share access to your device(s) with other registered smanos accounts who may not own a smanos product. Enter the email address and nickname of the account you want to share with, and then select the device(s).
It is highly recommended that you set access limits to those who you may share your camera(s) with. In choosing not to do so, you grant your family and/or friends continual access to the camera(s) you have shared.
The user who receives the shared device can only mark the name of the device, sharing of the device to other users or changing the settings of the device can not be done.
K1/K2 Main Page
Review the latest operations or alerts. These will appear here with the bottom one being the most recent.
Change the status of the K1/K2 system by pressing 1 of the 4 corresponding icons of the Alarm Status you wish to select.
Accessories
System Settings
Colors of the background will indicate the corresponding System Status: Blue: Home Mode Red: ArmedGreen: DisarmedFlashing red: SOS
SOS Home Mode Disarm Arm
Set Up Your K1/K2 Smart Hub1. Plug the power adapter into a wall socket and into the K1/K2 Hub, slide the Power Switch from OFF to ON, wait until the white light flashes blue.
13
2. Connect the K1/K2 to Your SmartphoneUse the Pin to press the WiFi Configuration Button for 3 seconds, the light will flash red and blue alternately.
3. Go to your phone’s WiFi settings, look for and select "“smanos K1” or “smanos K2“" hotspot to connect your mobile to the Hub. When connected, return to your “smanos home” app.
7
14
4. Enter WiFi Details for Your K1/K2 Smart HubSelect your 2.4GHz WiFi network from the display list, and enter the WiFi network password. The Hub will connect to the selected WiFi network. This binding process should take about one minute.
7
When a successful connection is established, the indicator will stop blinking.
Now, your smanos K1/K2 Hub is successfully set, enjoy a smart and secure life!
7
15
K1/K2 Smart Hub Light Indicator Color Meanings The different colors shown on the light indicator on the back of the K1/K2 Hub tell you the device’s current status. Here is a list of what each color or pattern means:
Pattern Description MeaningThe indicator blinks in a white color Hub is booting upThe blue indicator blinks slowly (once every 2 sec)
Hub is disconnected from a viable WiFi network
The indicator shows a steady light Hub is connected with a viable WiFi network
Red and blue blink alternately Hub is in WiFi Configuration ModeRed, blue and green blink alternately Hub is in Accessory Pairing ModeRed indicator System is armedBlue indicator System is armed in Home ModeGreen indicator System is disarmed
System StatusesSystem Armed
Rotate the Keypad ring to the left, and then enter the Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right, and then enter the Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right first, then to the left, and then enter the Keypad password (Press the left top key for 6 times).
System DisarmedAll the sensors stop detecting except any sensors that you may have set to 24 Hour Mode (that is, alarm regardless of the system state 24/7, refer to page 21). Sensors in the 24 Hour Mode are continuously monitoring a particular area, kitchen or laundry room. Some examples would be a WI-20 Water Sensor (need to purchase separately) near a washing machine, hot water heater or dishwasher or a DS-20 Door/ Window Sensor on a medicine cabinet or your safe. Any sensor placed in 24 Hour Mode will keep working regardless of system status.
Note: The Keypad password can be changed on the “smanos home” app. Rzefer to page 22
KP-20 Keypad Operating Steps APP OperatingStep
K1/K2 HubIndicator
SystemDisarmed
Pressthe icon
System StatusesSystem ArmedAll the K1/K2 sensors detect for anomalies; the indoor siren will sound immediately when a sensor is triggered. You and other pre-authorized users will receive push notifications on your/their phone. This mode is recommended for when no one is at home, and can be easily set from the Keypad or app.
KP-20 Keypad Operating Steps APP OperatingStep
K1/K2 HubIndicator
SystemArmed
Pressthe icon
System in Home ModeOnly the Motion Sensor in this kit will stop detecting (default setting; can be changed on the app), which enables you and your family to move freely inside your home without triggering the motion sensor, yet your door/window sensors are still alert and protecting the perimeter. This mode is recommended for when someone is at home, such as during the night, and can be set from the Keypad or the app.
KP-20 Keypad Operating Steps APP OperatingStep
K1/K2 HubIndicator
System inHome Mode
Pressthe icon
All the K1/K2 sensors detect for anomalies; the indoor siren will sound immediately when a sensor is triggered. You and other pre-authorized users will receive push notifications on your/their phone. This mode is recommended for when no one is at home, and can be easily set from the Keypad or app.
Rotate the Keypad ring to the left, and then enter the Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right, and then enter the Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right first, then to the left, and then enter the Keypad password (Press the left top key for 6 times).
System DisarmedAll the sensors stop detecting except any sensors that you may have set to 24 Hour Mode (that is, alarm regardless of the system state 24/7, refer to page 21). Sensors in the 24 Hour Mode are continuously monitoring a particular area, kitchen or laundry room. Some examples would be a WI-20 Water Sensor (need to purchase separately) near a washing machine, hot water heater or dishwasher or a DS-20 Door/ Window Sensor on a medicine cabinet or your safe. Any sensor placed in 24 Hour Mode will keep working regardless of system status.
Note: The Keypad password can be changed on the “smanos home” app. Rzefer to page 22
KP-20 Keypad Operating Steps APP OperatingStep
K1/K2 HubIndicator
SystemDisarmed
Pressthe icon
System StatusesSystem ArmedAll the K1/K2 sensors detect for anomalies; the indoor siren will sound immediately when a sensor is triggered. You and other pre-authorized users will receive push notifications on your/their phone. This mode is recommended for when no one is at home, and can be easily set from the Keypad or app.
KP-20 Keypad Operating Steps APP OperatingStep
K1/K2 HubIndicator
SystemArmed
Pressthe icon
System in Home ModeOnly the Motion Sensor in this kit will stop detecting (default setting; can be changed on the app), which enables you and your family to move freely inside your home without triggering the motion sensor, yet your door/window sensors are still alert and protecting the perimeter. This mode is recommended for when someone is at home, such as during the night, and can be set from the Keypad or the app.
KP-20 Keypad Operating Steps APP OperatingStep
K1/K2 HubIndicator
System inHome Mode
Pressthe icon
KP-20 Keypad Operating Steps APP OperatingStep
K1/K2 HubIndicator
Rotate the Keypad ring to the right, and then enter the Keypad password (Press the left top key for 6 times).
Pressthe icon
SystemArmed
16
System in Home Mode
Rotate the Keypad ring to the left, and then enter the Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right, and then enter the Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right first, then to the left, and then enter the Keypad password (Press the left top key for 6 times).
System DisarmedAll the sensors stop detecting except any sensors that you may have set to 24 Hour Mode (that is, alarm regardless of the system state 24/7, refer to page 21). Sensors in the 24 Hour Mode are continuously monitoring a particular area, kitchen or laundry room. Some examples would be a WI-20 Water Sensor (need to purchase separately) near a washing machine, hot water heater or dishwasher or a DS-20 Door/ Window Sensor on a medicine cabinet or your safe. Any sensor placed in 24 Hour Mode will keep working regardless of system status.
Note: The Keypad password can be changed on the “smanos home” app. Rzefer to page 22
KP-20 Keypad Operating Steps APP OperatingStep
K1/K2 HubIndicator
SystemDisarmed
Pressthe icon
System StatusesSystem ArmedAll the K1/K2 sensors detect for anomalies; the indoor siren will sound immediately when a sensor is triggered. You and other pre-authorized users will receive push notifications on your/their phone. This mode is recommended for when no one is at home, and can be easily set from the Keypad or app.
KP-20 Keypad Operating Steps APP OperatingStep
K1/K2 HubIndicator
SystemArmed
Pressthe icon
System in Home ModeOnly the Motion Sensor in this kit will stop detecting (default setting; can be changed on the app), which enables you and your family to move freely inside your home without triggering the motion sensor, yet your door/window sensors are still alert and protecting the perimeter. This mode is recommended for when someone is at home, such as during the night, and can be set from the Keypad or the app.
KP-20 Keypad Operating Steps APP OperatingStep
K1/K2 HubIndicator
System inHome Mode
Pressthe icon
Only the Motion Sensor in this kit will stop detecting (default setting; can be changed on the app), which enables you and your family to move freely inside your home without triggering the motion sensor, yet your door/window sensors are still alert and protecting the perimeter. This mode is recommended for when someone is at home, such as during the night, and can be set from the Keypad or the app.
Rotate the Keypad ring to the left, and then enter the Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right, and then enter the Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right first, then to the left, and then enter the Keypad password (Press the left top key for 6 times).
System DisarmedAll the sensors stop detecting except any sensors that you may have set to 24 Hour Mode (that is, alarm regardless of the system state 24/7, refer to page 21). Sensors in the 24 Hour Mode are continuously monitoring a particular area, kitchen or laundry room. Some examples would be a WI-20 Water Sensor (need to purchase separately) near a washing machine, hot water heater or dishwasher or a DS-20 Door/ Window Sensor on a medicine cabinet or your safe. Any sensor placed in 24 Hour Mode will keep working regardless of system status.
Note: The Keypad password can be changed on the “smanos home” app. Rzefer to page 22
KP-20 Keypad Operating Steps APP OperatingStep
K1/K2 HubIndicator
SystemDisarmed
Pressthe icon
System StatusesSystem ArmedAll the K1/K2 sensors detect for anomalies; the indoor siren will sound immediately when a sensor is triggered. You and other pre-authorized users will receive push notifications on your/their phone. This mode is recommended for when no one is at home, and can be easily set from the Keypad or app.
KP-20 Keypad Operating Steps APP OperatingStep
K1/K2 HubIndicator
SystemArmed
Pressthe icon
System in Home ModeOnly the Motion Sensor in this kit will stop detecting (default setting; can be changed on the app), which enables you and your family to move freely inside your home without triggering the motion sensor, yet your door/window sensors are still alert and protecting the perimeter. This mode is recommended for when someone is at home, such as during the night, and can be set from the Keypad or the app.
KP-20 Keypad Operating Steps APP OperatingStep
K1/K2 HubIndicator
System inHome Mode
Pressthe icon
KP-20 Keypad Operating Steps APP OperatingStep
K1/K2 HubIndicator
Rotate the Keypad ring to the right first, then to the left, and then enter the Keypad password (Press the left top key for 6 times).
Pressthe icon
System inHome Mode
System Disarmed Rotate the Keypad ring to the left, and then enter the Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right, and then enter the Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right first, then to the left, and then enter the Keypad password (Press the left top key for 6 times).
System DisarmedAll the sensors stop detecting except any sensors that you may have set to 24 Hour Mode (that is, alarm regardless of the system state 24/7, refer to page 21). Sensors in the 24 Hour Mode are continuously monitoring a particular area, kitchen or laundry room. Some examples would be a WI-20 Water Sensor (need to purchase separately) near a washing machine, hot water heater or dishwasher or a DS-20 Door/ Window Sensor on a medicine cabinet or your safe. Any sensor placed in 24 Hour Mode will keep working regardless of system status.
Note: The Keypad password can be changed on the “smanos home” app. Rzefer to page 22
KP-20 Keypad Operating Steps APP OperatingStep
K1/K2 HubIndicator
SystemDisarmed
Pressthe icon
System StatusesSystem ArmedAll the K1/K2 sensors detect for anomalies; the indoor siren will sound immediately when a sensor is triggered. You and other pre-authorized users will receive push notifications on your/their phone. This mode is recommended for when no one is at home, and can be easily set from the Keypad or app.
KP-20 Keypad Operating Steps APP OperatingStep
K1/K2 HubIndicator
SystemArmed
Pressthe icon
System in Home ModeOnly the Motion Sensor in this kit will stop detecting (default setting; can be changed on the app), which enables you and your family to move freely inside your home without triggering the motion sensor, yet your door/window sensors are still alert and protecting the perimeter. This mode is recommended for when someone is at home, such as during the night, and can be set from the Keypad or the app.
KP-20 Keypad Operating Steps APP OperatingStep
K1/K2 HubIndicator
System inHome Mode
Pressthe icon
All the sensors stop detecting except any sensors that you may have set to 24 Hour Mode (that is, alarm regardless of the system state 24/7, refer to page 21). Sensors in the 24 Hour Mode are continuously monitoring a particular area, kitchen or laundry room. Some examples would be a WI-20 Water Sensor (need to purchase separately) near a washing machine, hot water heater or dishwasher or a DS-20 Door/ Window Sensor on a medicine cabinet or your safe. Any sensor placed in 24 Hour Mode will keep working regardless of system status.
Rotate the Keypad ring to the left, and then enter the Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right, and then enter the Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right first, then to the left, and then enter the Keypad password (Press the left top key for 6 times).
System DisarmedAll the sensors stop detecting except any sensors that you may have set to 24 Hour Mode (that is, alarm regardless of the system state 24/7, refer to page 21). Sensors in the 24 Hour Mode are continuously monitoring a particular area, kitchen or laundry room. Some examples would be a WI-20 Water Sensor (need to purchase separately) near a washing machine, hot water heater or dishwasher or a DS-20 Door/ Window Sensor on a medicine cabinet or your safe. Any sensor placed in 24 Hour Mode will keep working regardless of system status.
Note: The Keypad password can be changed on the “smanos home” app. Rzefer to page 22
KP-20 Keypad Operating Steps APP OperatingStep
K1/K2 HubIndicator
SystemDisarmed
Pressthe icon
System StatusesSystem ArmedAll the K1/K2 sensors detect for anomalies; the indoor siren will sound immediately when a sensor is triggered. You and other pre-authorized users will receive push notifications on your/their phone. This mode is recommended for when no one is at home, and can be easily set from the Keypad or app.
KP-20 Keypad Operating Steps APP OperatingStep
K1/K2 HubIndicator
SystemArmed
Pressthe icon
System in Home ModeOnly the Motion Sensor in this kit will stop detecting (default setting; can be changed on the app), which enables you and your family to move freely inside your home without triggering the motion sensor, yet your door/window sensors are still alert and protecting the perimeter. This mode is recommended for when someone is at home, such as during the night, and can be set from the Keypad or the app.
KP-20 Keypad Operating Steps APP OperatingStep
K1/K2 HubIndicator
System inHome Mode
Pressthe icon
KP-20 Keypad Operating Steps APP OperatingStep
K1/K2 HubIndicator
Rotate the Keypad ring to the left, and then enter the Keypad password (Press the left top key for 6 times).
Pressthe icon
SystemDisarmed
Note: The Keypad password can be changed on the “smanos home” app. Refer to page 22
17
App Operation
Device List PageOnce you finished the network setting for your K1/K2 Smart Hub, it will appear on the Device List Page.
7
Edit the devices
When the status bar turns light, it means the device is ONLINE and available.If it's gray, it means the device is OFFLINE and cannot be accessed.
This icon on the left of your device indicates that the device was shared to you by family or friends.
Edit Your Device(s)
7
Delete DevicesTap on the right top Edit button[ ], press the Delete button [ ] and choose [ ].
SortingTap on the right top Edit button [ ], press and hold the Sorting button [ ], drag it up or down to the position where you want it to be located and then release.
18
K1/K2 Main Page
Add the K1/K2 System to the “smanos home” App Share Your Device to Family Accounts
Add DevicePress the “+” button on the Device List. Tap on [K1/K2 Smart Hub], then follow the configuration steps to set up your K1/K2 Hub with your home WiFi.
Tap on [ ] on the main page to enter the Account Menu.
By choosing “My Shares” on the menu and pressing the [ + ] button, you can share access to your device(s) with other registered smanos accounts who may not own a smanos product. Enter the email address and nickname of the account you want to share with, and then select the device(s).
It is highly recommended that you set access limits to those who you may share your camera(s) with. In choosing not to do so, you grant your family and/or friends continual access to the camera(s) you have shared.
The user who receives the shared device can only mark the name of the device, sharing of the device to other users or changing the settings of the device can not be done.
K1/K2 Main Page
Review the latest operations or alerts. These will appear here with the bottom one being the most recent.
Change the status of the K1/K2 system by pressing 1 of the 4 corresponding icons of the Alarm Status you wish to select.
Accessories
System Settings
Colors of the background will indicate the corresponding System Status: Blue: Home Mode Red: ArmedGreen: DisarmedFlashing red: SOS
SOS Home Mode Disarm Arm
Review the latest operations or alerts. These will appear here with the bottom one being the most recent.
AccessoriesSystem Settings
Colors of the background will indicate the corresponding System Status: Blue: Home Mode Red: ArmedGreen: DisarmedFlashing red: SOS
Change the status of the K1/K2 system by pressing 1 of the 4 corresponding icons of the Alarm Status you wish to select.
SOS Disarm ArmHome Mode
Door(s) / Window(s) Open AlertWhen the K1/K2 system is being armed, you will receive a notification to tell you if any door or window is open. The armed behavior will be processed even if you leave these doors or windows open, so it is HIGHLY RECOMMENDED you go to check and close all these doors or windows, otherwise the system is not 100% in guard.
7
19
History
7
You can check the latest 300 records of Alarms and Operations.The Alarm alerts are in red.
Accessories PagePress the [ ] button to enter Accessories List.
7
20
Add New AccessoryTap [ ] icon on the upright corner, choose the corresponding accessory, then follow the instructions on the app.
7
*You can also pair the accessory by short pressing the RF button once on the K1/K2 Hub, wait it sounds one beep and then press the tamper ing swi tch on the accessory for 3 times, wait until the K1/K2 Hub beep once to finish the pairing.
Accessory ManagementThe categories (rooms) and the quantity of the assigned accessories in each will show on this page.You will see if the accessory is offline or in a low battery status, there will be a corresponding notification icon which appears on the category.
7
7
Tap one catogary or room and the assigned accessories would appear and you can check the battery status of your accessories.If you want to delete the accessory, just select and slide the accessory to the left and then choose [ ] icon.
*For deleting all the devices, you can also press and hold the RF button on the K1/K2 Hub and wait until it sounds a long beep.
+
21
Customize Your Own Accessories Door / Window Sensor and Motion Sensor
7
7
1. Edit sensor name. You could name it “Front Door” and place it in the Entrance Location.2. Choose a location for the sensor. You can have multiple sensors in one location.3. This option, if enabled, will sound alarm if triggered when system is armed in Home Mode. For example, this would not be enabled for most indoor motion sensors so you could move freely inside of your home while all perimeter sensors are enabled.4. This option, if enabled, the sensor set to 24 Hour Mode, will sound alarm when triggered regardless of what state the system is in.A water sensor would be a good example of a 24/7 sensor.5. This option, if enabled, the hub will alarm after the set delay time if sensor is triggered, so that the customer can disarm in time if it is triggered by mistake.Note: This feature doesn't apply to sensor set in “Alarm Regardless of State (24/7)” For delay time setting, please refer to page 24
6. Bell Mode (Available only for Door/Window Sensor). When the system is in the Disarmed status, the hub will give out a "Dingdong" sound when door sensor is triggered then you know someone opened the front door.Note: The feature doesn’t apply to door sensors set in “Alarm Regardless of State (24/7)”
7. Sensitivity (Available only for PIR motion sensor)The sensitivity of motion sensor could be adjusted based on your home conditions.
22
Keypad
7
1. If you want to reset your keypad password, press “Set New Key Pattern” and enter the new key patten.2. If you want to check the current keypad password, press “check the key pattern” and it will appear on the dialog. 3. You can turn on / off the indicator light of the Keypad.
Indoor Siren
7
1. You can adjust the volume and the duration of the Siren to suit your requirements.
2. When you arm / disarm the system, the Siren will sound a corresponding tone to indicate the status, you can turn on / off this function here.
3. You can turn on / off the alarm indicator light of the Siren.
23
Settings PagePress the [ ] button to enter Settings Page. Now you can enter the Settings Page and edit the settings of the K1/K2 and make the system yours.
7
Timed Arm / DisarmOn this page, you can set a time to Arm/Disarm/Home Arm your system automatically. If you want to activate one timer, you can turn it on and set the action and time.
7
Turn timer on/offSet a timeChoose an action
Choose repeat days
24
Push Messages
7
1. Change the ringtone of the push message
Note: This feature only applies to iPhone or Android smart phones under Android 8.0. It isn’t available for Android 8.0 or above because of the system limitations.
2. If you want to get an email notification whenever the system alarm is triggered, you can turn on the “Email” function and input your email address.
Delay SettingsIn this page, you can set an Alarm delay & Auto-armed delay for your K1/K2 system.
7
1. When "Alarm delay" is selected, the triggered accessory will sound the Siren when the delay setting times-out. A reminding sound will be heard during this period (the length of the delay can be set by the user). How to set?Step 1: Select the delay time.Step 2: Go back to the main page, select the relative door/window sensor and activate this delay function.(see page 21)
2. When the Auto-armed delay is set, the K1/K2 Hub will turn into Armed status after the setting period of time.
25
Time SettingYou can synchronize K1/K2 system time with the time zone of your mobile and set the format of date.
7
Test ModeTwo Uses for the Test Mode:1. Check the range between accessories and K1/K2 Hub, without triggering an alarm.2. Prevent the tamper switch of a sensor triggering an alarm while installing the accessory or during the replacement of batteries.
7
Once you triggered the sensor, the signal mark would indicate the signal strength between the sensor and the K1/K2 Hub.
The Test Mode will automatically quit in 10 minutes.
26
Firmware Update
7
Your K1/K2 system is a living, ever evolving product and we will always be making improvements and additions to the K1/K2 so you get the most enjoyment from it.When you see a red “new” beside your Firmware tab you will know you have new firmware to update. When you choose to update the firmware, please be sure you have time to do so. You will need to stay at the page and wait until it's completed, making sure you do not turn off your phone or K1/K2. You will also need to follow any additional instructions provided during update.
Edit Your Smanos AccountTap on [ ] on the Device List page to enter the Account Menu.
7
Tap on the picture, and you can add or replace your account image by taking a picture or choosing a picture from your phone’s album. Warning: If you upload a personal account picture, the profile photo is open to other users who share device to you. If you don't want that to be seen by others, please don't upload your personal picture.If you want to change your account name, just tap on the [ ] button and enter a new name. Changing your password can also be done on this page.
27
My SharesBy choosing “My Shares” on the menu and pressing the [ ] button, you can share access to your device(s) with other registered smanos accounts who may not own a smanos product.Enter the email address and nickname of the account you want to share with, and then select the device(s).
Admin (Full Access)With Admin (Full Access), the shared user in this group will be able to do almost everything as the Owner can to the devices you've shared, with few exceptions, like re-sharing to others.Important: Because people in Admin group with access to a device can do so much, you should only invite people you really trust.
User (Read Only)With User (Read Only), the shared user in this group will only be able to edit the name of the device(s) and receive alerts; re-sharing the device(s) to other users or changing the settings are not permitted.By week daysSelect the day(s) and each day's routine you want the device(s) to be accessible to the account you share with.By datesThe family and/or friend(s) you share with would have access to your device(s) during the entire chosen time period.
Stop SharingIf you would like to limit access to the device you have shared, tap stop sharing, then tap "√" on the top right to
save.
7
28
Recommended PlacementsK1/K2 Smart Hub: KP-20 Security Keypad:
Place your K1/K2 Hub in an open area that is located centrally to the whole smart home system, and within line of sight of your WiFi router.
Place the Keypad near the entry of your home that is convenient for you to control the system on your way out/in.
DS-20 Door/Window Sensor: MD-20 Pet Friendly Motion Sensor:
Can be installed on a door/door frame, window/window frame or any other object that can be opened/closed and needs detection. There are aligning marks on the sides of the transmitter and magnet; make sure the marks face each other and within the range of 1 cm (0.4”).
Place the sensor at a location that is critical for home security at a height of 2-2.2 meters (6.6'-7.3') from the ground. Avoid facing swinging objects, heat, window and door.
PET-FRIENDLYMOTION SENSOR
29
The best installation placement is when the MD-20 is facing 90°to the walking directionor pathway of any would-be intruders.
SS-20 Indoor Siren:You should place the Siren in any location as long as it is within the range with K1 Hub and it is not a bad idea to have 2 or 3 Sirens. More than one Siren helps deter would-be intruders even more as they will go towards the initial Siren to try to break it. If successful and the 2nd or 2nd and 3rd Siren are still blaring at 104 decibels, it is more likely they will be leaving as intruders do not care for attention and know they have only a short period of time.
It’s needed to use the crowbar comes with the standard set to carefully lift the back cover and replace the battery.The tamper alarm may be triggered when the back cover is opened,you can set hub volume to mute or set it to test mode before replacing the battery.
60°
2m
2m
SS-20 Indoor Siren:You should place the Siren in any location as long as it is within the range with K1/K2 Hub and it is not a bad idea to have 2 or 3 Sirens. More than one Siren helps deter would-be intruders even more as they will go towards the initial Siren to try to break it. It successful and the 2nd or 2nd 3rd Siren are still blaring at 104 decibels, it is more likely they will be leaving as intruders do not care for attention and know they have only a short period of time.
30
InstallationStep1: Unlock the base from your device. Use the crowbar comes with the standard set to carefully lift the back cover.
SS-20 Indoor Siren:You should place the Siren in any location as long as it is within the range with K1 Hub and it is not a bad idea to have 2 or 3 Sirens. More than one Siren helps deter would-be intruders even more as they will go towards the initial Siren to try to break it. If successful and the 2nd or 2nd and 3rd Siren are still blaring at 104 decibels, it is more likely they will be leaving as intruders do not care for attention and know they have only a short period of time.
It’s needed to use the crowbar comes with the standard set to carefully lift the back cover and replace the battery.The tamper alarm may be triggered when the back cover is opened,you can set hub volume to mute or set it to test mode before replacing the battery.
60°
2m
2m
Step 2: Place the base on the wall; make sure the “UP” arrow on the base is pointing vertically to the ceiling. (The green “Level” is a good reference to keep your device leveled).
Recommended Placements
DS-20 Door/Window Sensor:Can be installed on a door/door frame, window/window frame or any other object that can be opened/closed and needs detection. There are aligning marks on the sides of the transmitter and magnet; make sure the marks face each other and within the range of 1 cm (0.4”).
MD-20 Pet Friendly Motion Sensor:Place the sensor at a location that is critical for home security at a height of 2-2.2 meters (6.6'-7.3') from the ground. Avoid facing swinging objects, heat, window and door.
K1/K2 Smart Hub:Place your K1/K2 Hub in an open area that is located centrally to the whole smart home system, and within line of sight of your WiFi router.
KP-20 Security Keypad:Place the Keypad near the entry of your home that is convenient for you to control the system on your way out/in.
PET-FRIENDLYMOTION SENSOR
InstallationStep 1: Unlock the base from your device.Step 2: Place the base on the wall; make sure the “UP” arrow on the base is pointing vertically to the ceiling; use the provided screws or double sided tape to install it properly (the green “Level” is a good reference to keep your device leveled).Ste p 3: Lock your device onto the base.
K1/K2 Smart Hub Light Indicator Color MeaningsThe different colors shown on the light indicator on the back of the K1/K2 Hub tell you the device’s current status. Here is a list of what each color or pattern means:
Pattern Description
The indicator blinks in a white color
Red and blue blink alternately
Red, blue and green blink alternately
Red indicator
Blue indicator
Green indicator
The blue indicator blinks slowly (once every 2 sec)
The indicator shows a steady light
Meaning
Hub is booting up
Hub is in WiFi Configuration Mode
Hub is in Accessory Pairing Mode
System is armed
System is armed in Home Mode
System is disarmed
Hub is disconnected from a viable WiFi network
Hub is connected with a viable WiFi network
Step 3: Use the provided screws or double sided tape to install it properly and then lock your device onto the base.
SS-20 Indoor Siren:You should place the Siren in any location as long as it is within the range with K1 Hub and it is not a bad idea to have 2 or 3 Sirens. More than one Siren helps deter would-be intruders even more as they will go towards the initial Siren to try to break it. If successful and the 2nd or 2nd and 3rd Siren are still blaring at 104 decibels, it is more likely they will be leaving as intruders do not care for attention and know they have only a short period of time.
It’s needed to use the crowbar comes with the standard set to carefully lift the back cover and replace the battery.The tamper alarm may be triggered when the back cover is opened,you can set hub volume to mute or set it to test mode before replacing the battery.
60°
2m
2m
31
Reload the Batteries of Accessories It's needed to use the crowbar comes with the standard set to carefully lift the back cover and replace the battery.
The tamper alarm may be triggered when the back cover is opened, you can set hub volume to mute or set it to test mode before replacing the battery.
Z-Wave (Available only for K2 Hub)If the hub you bought has a Z-Wave logo on it, which means it could work with other Z-Wave certified devices. Please scan the QR code for more information.
Technical Support:http://www.smanos.com/K1http://www.smanos.com/[email protected]
32
Specifications
HubPower supply:DC 12V 500mABackup battery: Rechargeable li-ion batteryExpandable Accessories:10 remote controls, 50 sensorsRadio Frequency:EAN 8718868403926 & 8719325039443 868MHzUPC 859756005193 & 859756005636 915MHz*Europe: 868MHz; Australia: 915MHz
Receiver Category: Category 2 (standard performance level of receiver)EIRP (dBm) Max.: K1: 16.1; K2: 15.09ERP(dBm) Max. 868MHz: -4.15; 868.4MHz: -7.62 Wireless standards: IEEE802.11b/g/nHousing Material: ABS plastic + PCOperation Condition: Temperature 0-50°C/32° - 122°F, Humidity < 80% RH (non-condensing)Dimensions (L×W×H): 85 x 85 x 36mm
Door/Window SensorModel: DS-20Power: 3V CR123A Li-Mn battery x 1 pcRadio frequency: 868MHz or 915MHz*Europe: 868MHz; Australia: 915MHz
ERP (dBm) Max.: 1.73Wireless range: ≤ 80m (in open area)Operating conditions:Temperature 0-50°C/32° - 122°F, Humidity < 80% RH (non-condensing)Transmitter dimensions (L x W x H): 23.8 x 26.4 x 70mm/0.94" x 1.04" x 2.76"Magnet dimensions (L x W x H): 14.9 x 10.4 x 70mm/0.59" x 0.41" x 2.76"
33
Pet Friendly Motion SensorModel: MD-20Power: 3V CR123A Li-Mn battery x 2 pcsFrequency: 868MHz or 915MHz*Europe: 868MHz; Australia: 915MHz
ERP (dBm) Max.: -17.7Wireless range: ≤ 80m (in open area)Operating conditions:Temperature 0-50°C/32° - 122°F, Humidity < 80% RH (non-condensing)Dimensions (L x W x H): 85 x 85 x 36mm/3.35" x 3.35" x 1.42"
Security KeypadModel: KP-20Power: 3V CR123A li-Mn battery x 2 pcsFrequency: 868MHz or 915MHz *Europe: 868MHz; Australia: 915MHz
ERP(dBm).MAX: -0.86Wireless range: ≤ 80m (in open area)Operating conditions:Temperature 0-50°C/32° - 122°F, Humidity < 80% RH (non-condensing)Dimensions (L x W x H): 80 x 80 x 35.5mm/3.15" x 3.15" x 1.34"
Indoor SirenModel: SS-20Power: 3V CR123A Li-Mn battery x 4 pcsSound: 104 DecibelsFrequency: 868MHz or 915MHz*Europe: 868MHz; Australia: 915MHz
ERP (dBm) Max.: -5.81Wireless range: ≤ 80m (in open area)Operating conditions:Temperature 0-50°C/32° - 122°F, Humidity < 80% RH (non-condensing)Dimensions (L x W x H): 85 x 85 x 37mm/3.35" x 3.35" x 1.46"