JUNO International catalogue

InternationalCatalogue

Paints, enamels and varnishesfor decorative, professionaland industrial sectors

Colour, use and legal disclaimer:

Printed colours in this catalogue may vary as printing inks do not perform like dying inks. Showed colours are approximations and therefore not valid for decision making. For accurate colour samples, ask the marketing department for real applications or colour cards.

This catalogue shows JUNO standard range. Product range, specifications, naming and code system may vary according to the markets. Contact the commercial department for further information and product possibilities.

All art work is property of JUNO company and cannot be used or reproduced. Any unauthorized art work reproduction is protected by law. Any concerns as to the legality of reproduction should be directed to JUNO ([email protected]).

Index

Corporate profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Paint systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1. Professional sector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.1. Paints and treatments for facades . . . . . . . . . . . . . . . . . 9

1.2. Outdoor paints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

1.3. Indoor decorative paints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

1.4. Enamels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

1.5. Junomatic tintometric system . . . . . . . . . . . . . . . . . . . . . . . . 20

1.6. Wood treatment and decoration . . . . . . . . . . . . . . . . . . . . 20

1.7. Plasters and fillers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

1.8. Solvents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

2. Industrial sector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

2.1. Primers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

2.2. Enamels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

2.3. Special industrial paints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Juno International Catalogue | 3

Quality since 1927

JUNO company was established in 1927, in Spain. It was founded by Mr. Julio Cano in Bilbao downtown, main city of the Basque Country, and the company remains faithful to their family origins.

Main activity was the production of decorative and protective varnishes and paints, although along the years the production lines and business divisions have enlarged to industrial paints, paint machinery, tooling, refurnishing and decoration.

Nowadays, JUNO has three factories located in Spain and over 75 own distribution points, satisfying all domestic and professional needs and leading the demanding facades paint sector as well as ecologic paints and enamels.

Outgoing investments in R&D and production improvements together with right partnerships with premium quality raw material producers guarantee the steady quality of our products, some of them over 50 years experienced.

From 2007 onwards, international activities have placed the JUNO brand worldwide.

JUNO SUSTAINABILITY PROGRAMME

JUNO corporate management strategy is based on a principle of harmonising economic success and social prosperity with environmental values.

Our factories work with ISO 9001 Production and ISO 14001 Environment Systems to provide assurance to management, partners and customers that they are in control of the organisational processes and activities having an impact on the environment and to assure employees that they are working for an environmentally responsible organisation.

Flameproof

B-s1,d0

EMBLEMATIC STRUCTELECTRICAL PYLONSSTORAGE CONTAINERS

HOTELSFENCESSHIP DECKS

INDOOR WOODSPORT FACILITIESSWIMMING POOLS

DECORATIVE FACADPARKINGSART INSTITUTIONS

Work done, satisfaction guaranteed.Amateur painters and people fond of

do-it-yourself get surprised when a

professional is working, as the activity

seems to perform smooth, easy and

according to plan. It is not only due

to their experience, gained over years

and years, and professional skills. The

right selection of the products, proper

preparation of the supports and suitable

application under manufacturer’ advices

surprise during the process, and deeply

indeed once the work is complete.

Professional paint not only means

intensive application or difficult work

conditions, it is more related to the

prescription of integral paint systems.

TURES INDUSTRIAL STRUCTURES

ENERGY PIPES

OUTDOOR WOOD

DES FACADE TREATMENTS

6 | Juno International Catalogue

Raw substrate » Indoor

Preparation: If the substrate iss not properly prepared, use Akril

80. Otherwise, use Junolite or Hidrokril to improve adherence.

Finish: Use the Junoral range. If customised colour is required, use Junoprof bases. Apply two coats; first one for protective effect and second one for decorative purposes.

Raw substrate » Outdoor

Preparation: If the substrate iss not properly prepared, use Akril

80. Otherwise, use Junolite or Hidrokril to improve adherence. Use Invisible primer if the support requires anti-damp properties.

Finish: Use the high quality Junokril paint. Apply two coats; first one for protective effect and second one for decorative purposes.

Worn substrate » Indoor

Preparation: Not required, unless the support has defects, cracks or damp stains.

Finish: Use Junoral range. If customised colour is required, use Junoprof bases. Apply two coats; first one for protective effect and second one for decorative purposes.

Worn substrate » Outdoor

Preparation: Not required, unless the support has defects, cracks or damp stains. Use Invisible primer if the support requires anti-damp properties.

Finish: Use Junokril. If customised colour is required, use Bikril bases. Apply two coats; first one for protective effect and second one for decorative purposes.


Preparation: If the substrate iss not properly prepared, use Akril 80. Otherwise, use Junolite or Hidrokril to improve adherence.

Finish: Use Junokril. For immediate room use or hypersensitive people and children use B-7 Eco. Apply two coats; first one for protective effect and second one for decorative purposes.


Preparation: If the substrate iss not properly prepared, use Akril 80. Otherwise, use Junolite to improve adherence.

Finish: Use Junokril. If customised colour is required, use Bikril bases. Apply two coats; first one for protective effect and second one for decorative purposes.



Finish: Use Junoral range. If customised colour is required, use Junoprof bases. Apply two coats; first one for protective effect and second one for decorative purposes.


Preparation: Not required unless the support has defects, cracks or damp stains. Use Invisible primer if the support requires anti-damp properties.

Finish: Use Junokril. Use Juno-Rev coating in case the surface is not under intense weather conditions. If customised colour is required, use Bikril or Luna bases for the tintometric system. Apply two coats; first to protect and second for decorative purposes.


Preparation: If the support is not properly prepared, correct the defects with Plaste Juno and apply Hidrocril to improve adherence and penetration. Use Aquasell to cover joints and balance support absorption.

Finish: Use Junokril. For immediate room use or hypersensitive people and children use B-7 Eco. Apply two coats; first one for protective effect and second one for decorative purposes.


These supports are not appropriate for outdoor.



Finish: Use Junoral range. If customised colour is required, use Junoprof bases. For immediate room use or hypersensitive people and children use B-7 Eco. Apply two coats; first one for protective effect and second one for decorative purposes.


These supports are not appropriate for outdoor.


Preparation: Once the substrate is clean, use Multisupport primer or Metalex. Use Waterprim for immediate room use.

Finish: Use Junolac. If customised colour is required, use Junomalte bases. Use Aqualac for immediate room use.


Preparation: Once the substrate is clean, use Multisupport primer or Metalex.

Finish: Use Junolac. If customised colour is required, use Junomalte bases. To improve properties, use Antirust Junolac or Oxiforja. Apply two coats; first to protect and second for decorative purposes.



Finish: Use Junoplus. Use Aqualac for immediate room use. Apply two coats; first one for protective effect and second one for decorative purposes.



Finish: Use Junolac. To improve properties, use Antirust Junolac or Oxiforja. Apply two coats; first one for protective effect and second one for decorative purposes.

BRICKS

CONCRETE

PLASTER

METAL

Paint systemsPaint systems, either decorative or industrial, in new or worn substrates, require the right selection of the products, optimal application conditions and support preparation. Occasionally, when work is not satisfactory, it’s usual to accuse the paint, latest process and therefore the most exposed to blame. Nonetheless, previous steps related to advise, preparation and application guarantee the success.



Preparation: The substrate should be clean, without oils, oxide or previous paints. It’s recommended to use Multisupport primer for effective Antirust protection.

Finish: Use Junolac. If customised colour is required, use Junomalte as base for the tintometric system.


Preparation: The substrate should be clean, without oils, oxide or previous paints. It’s recommended to use Multisupport primer for effective Antirust protection.

Finish: Use Junolac. If customised colour is required, use Junomalte bases for the tintometric system. To improve properties, use Antirust Junolac or Oxiforja. Apply two coats; first to protect and second for decorative purposes.



Finish: Use Junolac. If customised colour is required, use Junomalte as base for the tintometric system. Apply two coats; first one for protective effect and second one for decorative purposes.



Finish: Use Aqualac for immediate room use and when a customised colour is required.


Preparation: Use waterbased Bondex treatment as protective barrier against insects.

Finish: Use Aquadur glossy finish for water resistance and hardness. Use Lasur to facilitate later treatments. Use Aqualac if a coloured finish is required.


Preparation: Use waterbased Bondex treatment as protective barrier.

Finish: Apply two coats of Junotinte to improve the wood resistance and hardness. To maintain the original wood beauty, use Junolac glossy varnish. Use Lasur to facilitate later treatments. Use Yacht or Teka oil if the wood is exposed to severe weather conditions.


Preparation: Gently sand the wood to remove previous treatments and apply Bondex

classic.

Finish: Use Aquadur glossy for water resistance and hardness. Apply two coats of Junotinte to improve the wood resistance.


Preparation: Gently sand the wood to remove previous treatments and apply Bondex

classic. If the former treatment is Lasur, it’s ready for the finish coat.

Finish: Apply two coats of Junotinte. To maintain the original wood colour and beauty, use Junolac glossy varnish. Use Junolac bright enamel for a coloured finish.


Preparation: Gently sand the wood to remove previous treatments and apply Aqueous

floor wood protector.

Finish: Apply glossy Aqueous

floor or Junodur varnish, in case the immediate use is not required.



floor wood protector.

Finish: Apply Yacht Spar varnish due to the great resistance to outdoor weather conditions or Lasur aqueous to improve wood permeability.



floor wood protector. If the former treatment is Lasur, it’s ready for the finish coat.

Finish: Apply Aqueous floor or Junodur varnish, in case the immediate use is not required.



floor wood protector. If the former treatment is Lasur

varnish, it’s ready for the finish coat.

Finish: Apply Yacht spar varnish due to the high resistance to outdoor weather conditions or Lasur aqueous to improve wood permeability.


Preparation: The substrate should be rough and clean, without oils, dust or previous treatments.

Finish: Use chloro-rubber Dynamol. If not exposed to intense use, it’s possible to use Junosol or Junosport. Use 2 components epoxy Pavimic

floor.




floor.




floor.




floor.



Finish: Use Junosol or Junosport. For improved resistance, use waterbased 2 components epoxy Dynapok (2/C).



Finish: Use waterbased 2 components epoxy Dynapok (2/C). It’s possible to use Junosol or Junosport if not under intense use.



Finish: Use waterbased Junosport. For improved resistance, use waterbased 2 components epoxy Dynapok

(2/C).



Finish: Use waterbased 2 components epoxy Dynapok (2/C). It’s possible to use Junosol or Junosport if not under intense use.

ALUMINUIM & GALVANISHED

WOOD

WOODEN FLOOR

CONCRETE FLOOR

ASPHALT FLOOR

1. Professional sectorPaint means immediate satisfaction. Paint is the first choice to give a room an instant makeover. It not only changes the looking but it’s able to draw attention, hide walls that are in poor condition or create the feeling of a light, airy, or bigger room. Colour possibilities, rich colour depth and effects are uncountable, but possibilities enlarge indeed if taking into account the varied applications, ranges from glossy to matt finish or textured. Up-to-date paints, enamels and varnishes become active, adding waterproof, fungicide, bactericide or mildew resistant properties.

Juno International Catalogue | 9Colours are approximations and may vary once applied.!

1.1. Paints and treatments for facades

1.1.1. Smooth waterbased paints

NOVOKRILSatin or matt

A-100 STIMAXMatt

BIKRILSatin or matt

JUNOKRILSatin

Matt

Waterbased premium paint with mildew resistant

properties.

Based on high flexibility and adherence pure acrylic copolymers and UV filters that create a water resistant film, while preserving the permeability.Indoor or outdoor.Water dilution and cleanliness.

Waterbased paint.

Based on acrylic resins.Indoor or outdoor.Water dilution and cleanliness.

Waterbased paint.

Based on acrovinyl resins and UV filters that create a water resistant film, while preserving the permeability.Indoor or outdoor.Water dilution and cleanliness.

Waterbased premium paint with mildew resistant

properties.

Based on high flexibility and adherence acrylic-vinyl copolymers and UV filters that create a water resistant film, while preserving the permeability.Indoor or outdoor.Water dilution and cleanliness.

Recommended for cement and concrete supports that may require water and damp resistance (facades, walls, yards).

Recommended for facades, walls, bathrooms and rooms that may require a water resistant and permeable quality matt finishing.



15 l 4 l

15 l 4 l 750 ml

15 l 4 l 750 ml

15 l 4 l 750 ml

White / Satin (62.150) White / Matt (62.195)

White / Matt (62.400)

White (60.100)

White base / P (60.300)

Medium base / D (60.301)

Transparent base / TR (60.302) Colours under request

15 l 10 l 4 l 750 ml

15 l 4 l 750 ml



Transparent base / TR (61.196)

Black (61.001)

Slate (61.002)

Earth (61.004)

Sky blue (61.009)

Sahara (61.018)

Mars (61.028)

Wheat (61.029)

Cement (61.038)

Ochre (61.065)

Turkish red (61.070)

Tile (61.079)

Orange (61.020)

Jai-Alai green (61.052)

New blue (61.012)

Red (61.016)

Yellow (61.025)

Colours under request




Yellow base (88.895)

Red base (88.896)


Satin finishing

Satin finishing

Matt finishing

Matt finishing

GEOCISA

GEOCISAFlameproof

B-s1,d0

Suitable for JUNOMATIC


!

Colours are approximations and may vary once applied.!10 | Juno International Catalogue 2012

A-5000Matt

MEDITERRANEAN FACADES

Matt

Great coverage waterbased paint.

Based on acrylic resins.Indoor or outdoor.Water dilution and cleanliness.

Rough waterbased paint.

Based on acrylic copolymers.Indoor or outdoor.Water dilution and cleanliness.

Recommended for facades, walls, bathrooms and rooms that may require a quick drying matt finishing, facilitating the later coats.

Recommended for walls and rooms that may require a rough matt finishing and for outdoor facades not directly exposed to severe weather conditions.

15 l 4 l

15 l 4 l



1.1.2. Elastic waterbased paints

ELASTIC ROOFS

JUNO ELASTIC

ANTILEAK JUNOTERAS

Waterbased elastic paint.

Based on acrylic resins with excellent mechanic and water protective properties and broad range of permanent elasticity (–20 °C to 60 °C).Outdoor use.Water dilution and cleanliness.

Waterbased waterproofing elastic paint.

Based on elastomeric acrylic resins.Outdoor use.Water dilution and cleanliness.

Waterbased waterproofing elastic paint.

Based on elastomeric acrylic resins.Outdoor use.Water dilution and cleanliness.

Recommended for the waterproofing and rough decoration of facades, ground floors and roofs with cracks or fissures.

Recommended for the horizontal (over 1% slope gradient) and vertical waterproofing on facades, balconies and roofs without fissures over 0.6 mm that may have damp problems not being exposed to intense use.

Recommended for the horizontal (over 1% slope gradient) and vertical waterproofing on facades, balconies and roofs without fissures over 0.6 mm that may have damp problems not being exposed to intense use.

15 l 4 l

15 l

15 l 4 l

White (62.601) Red (62.602)

Terracotta / Semi-matt (62.870)

White (62.641)

Red (62.642)

Green (62.643) Grey (62.644)

1.1.3. Stone coatings

LUNA COAT Stone coating.

Smooth finishing.Based on styrene resins with excellent flexibility and waterproofing properties.Indoor or outdoor.Water dilution and cleanliness.

Recommended to hide defects on the support giving a decorative and protective finishing.

15 l

White base / P (67.500) Colours under request Suitable for JUNOMATIC

!

!

!


SUPER JUNO-REV

Stone coating with mildew and carbonate resistant

properties.

Smooth finishing.Based on high quality acrylic resins with excellent flexibility and waterproofing properties while preserving the permeability.Indoor or outdoor.Water dilution and cleanliness.


15 l 4l

White / smooth (65.101)


Tile (65.132)

Volcano (65.103)

Brick (65.106)

Terracotta (65.102)

Clear salmon (65.153)

Arab brown (65.111)

Cinnamon (65.134)

Hazelnut (65.115)

Sand (65.117)

Cream (65.118)

Dune (65.116)

Clay (65.105)

Straw (65.195)

Mustard (65.107)

Desert (65.175)

Ivory (65.154)

Pastel (65.135)

Gold (65.177)

Bull-ring sand (65.112)

Vanilla (65.196)

Landscape (65.194)

Wafer (65.184)

Clear bone (65.119)

Wheat (65.110)

Jai-alai green (65.130)

Olive green (65.108)

Clear green (65.113)

Throne blue (65.143)

Montgo blue (65.104)


JUNO-REV Stone coating.

Smooth or rough finishing.Based on a acrylic resins with excellent flexibility and waterproofing properties while preserving the permeability.Indoor or outdoor.Water dilution and cleanliness.


15 l

15 l 4l

White (64.500)

White (65.500)

Grey (65.502)

Clay (65.515)

Sand (65.521)

Cream (65.522)

Wheat (65.530)

Brick (65.547)

Terracotta (65.548)

Light beige (65.560)


Tile (65.575)

Pastel (65.580)

Cinnamon (65.582)

Hazelnut (65.584)

Dune (65.585)

Mustard (65.550)


Rough finishing

Smooth finishing

GEOCISA

1.1.4. Special paints

A-4000Matt

Waterbased paint.

Based on acrylic resins with permeable, water resistant, anti-dust properties.Indoor or outdoor.Water dilution and cleanliness.

Recommended for facades, walls, bridges, warehouses, tunnels and parking that may require a quality matt finishing.

15 l

Grey / Matt (62.512)

SILICATO FACADES

Matt

Silicate paint with excellent transpiration.

Based on potassium silicates and inorganic pigments.Indoor or outdoor.Water dilution and cleanliness.

Recommended as a preparatory and finish paint for mineral walls thanks to the anti-blister effect, mildew protection, UV and dirtiness resistance in industrial installations.

15 l

White / Matt (75.301) Colours under request

!

!

!


JUNOLITE FACADES

Matt

SILICATO 5Matt

Self-cleaning permeable paint for facades.

Based on pliolite resins and organic diluents.Outdoor use.Solvent (D-40) dilution and cleanliness.

Silicate paint with excellent transpiration.

Based on potassium silicates and inorganic pigments.Indoor or outdoor.Water dilution and cleanliness.

Recommended to coat cement and concrete facades and walls.

Recommended as a preparatory and finish paint for mineral walls thanks to the anti-blister effect, mildew protection, UV resistance and dirtiness in industrial installations.

15 l

15 l


White / Matt (75.362) Colours under request

1.1.5. Primers and treatments

AKRIL - 80

HIDROCRILWaterbased

MINERAL PRIMERWaterbased

SILOXANO SEALER

Acrylic sealer.

Indoor or outdoor.Solvent (D-16) dilution and cleanliness.

Waterbased acrylic sealer with excellent adherence

and deep penetration.

Indoor or outdoor.Water dilution (4:1 Water-Hidrocril) and cleanness.

Waterbased primer with excellent adherence and

deep penetration.

Indoor or outdoor.Water dilution and cleanliness.

Protective primer for porous mineral supports.

Based on polysiloxane resins that reduce the rain absorption on outdoor supports.Outdoor use.No dilution, ready to use.Solvent (D-16) cleanliness.

Recommended to seal old mineral supports and consolidate differences in walls and supports (platter, stone, cement, concrete, old paints).

Recommended for supports with adherence problems or that requires an effective primer to consolidate the support.

Recommended for mineral supports with adherence problems or that requires an effective primer to consolidate the support.It’s also suggested as first coat for silicate paints.

Recommended to improve the rain protection while preserving the transpiration of the support (non vitreous bricks, grainy stone or natural stone). It maintains the original look of the support.

15 l 4 l 750 ml

20 l 4 l 750 ml

15 l

20 l

Colourless (42.115)

Colourless (81.006)

Colourless (75.302)

Colourless (68.104)

Colours are approximations and may vary once applied.! Juno International Catalogue 2012 | 13

WATER RESISTANT

SEALER

Protective primer for porous mineral supports.

Based on aliphatic solvents and aluminium stearates that reduce the rain absorption on outdoor supportsOutdoor use.No dilution, ready to use.Solvent (D-16) cleanliness.

Recommended to improve the rain protection while preserving the transpiration of the support (non vitreous bricks, grainy stone or natural stone).

20 l 4 l 750 ml

Amber (68.101)

1.2.1. Paints for sport facilities and public installations

1.2. Outdoor paints

JUNOLINEAWaterbased

JUNOSPORTWaterbased

JUNOSOLWaterbased

DYNAMOL

Concentrated waterbased paint.

Based on acrylic copolymers.Indoor or outdoor.Water dilution and cleanliness.


Based on pure acrylic resins with great resistance to weather conditions and bleach.Indoor or outdoor.Water dilution and cleanliness.


Based on acrylic resins with great adherence, rub and weather conditions resistance.Based on styrene resins.Indoor or outdoor.Water dilution and cleanliness.

Chloro-rubber paint with plastic effect and quick drying.

Based on chloro-rubber resins with great resistance to acids and alkalis.Indoor or outdoor.Solvent (D-40) dilution and cleanliness.

Recommended to signpost sport facilities, fairgrounds and safety at work over natural grass (football fields, farms, plot of lands), ground (building work, mountains and rural paths) or sand (beaches, playgrounds).

Recommended for swimming pools, sport facilities and parking without intense traffic.

Recommended for sport facilities and parking without intense traffic.

Recommended for industrial installations, road signposts, garages or sport facilities. Not suitable for pitch or bituminous asphalts.

4 l

15 l

15 l 4 l 750 ml

White (62.550)

White (06.100)

Blue (06.105)

Jai-alai green (06.152) Tennis red (06.168)

White (06.162) Jai-alai green (06.150) Tennis red (06.160)

White (09.500)

Black (09.501)

Pearl grey (09.533)


Tennis red (09.568)

10 l

!

!

!


1.3. Indoor decorative paints

1.3.1. Decorative waterbased paints

JUNORAL B-12Semi-gloss

High quality waterbased paint with anti-microbial

properties to resist mildew.

Based on vinyl polymers with broad spectrum fungicide and bactericide properties.Indoor use.Water dilution and cleanliness.

Recommended for the protection and decoration of cement, plaster or stone supports that require effective protection mildew. Durable finishing withstands frequent washings. Self-levelling formula to reduce brush and roller marks.

15 l 4 l 750 ml

White / Semi-gloss (72.010)

JUNORAL B-10Semi-gloss

JUNORAL B-7 ECOLOGIC

Matt

JUNORAL B-5 FUNMatt / Fungicide

JUNORAL B-7Black / Matt

JUNORAL B-5Matt

High quality waterbased paint.

Based on vinyl polymers.Indoor use.Water dilution and cleanliness.

Waterbased paint with anti-microbial properties to

resist mildew.

Based on acrylic copolymers with broad spectrum fungicide and bactericide properties.Indoor use.Water dilution and cleanliness.

High quality waterbased paint.

Based on acrylic polymers.Indoor use.Water dilution and cleanliness.

Great coverage and performance waterbased paint.

Based on acrylic copolymers.Indoor use.Water dilution and cleanliness.

Recommended for the protection and decoration of cement, plaster or stone supports that require effective protection mildew. Durable finishing withstands frequent washings. Self-levelling formula to reduce brush and roller marks.

Recommended for hospitals, kindergartens, nurseries, baby rooms or rooms for hypersensitive people as it does not liberate any chemical component. Durable finishing withstands frequent washings. Self-levelling formula to reduce brush and roller marks.

Recommended for the protection and decoration of cement, plaster or stone supports that require effective protection against mildew. Damp rub resistance.

Recommended for stylish decoration, tunnel effect improvement or to hide pipes, electric or industrial under roof installations. Durable finishing withstands frequent washings. Self-levelling formula to reduce brush and roller marks.

Recommended for standard use in building and decoration over cement or plaster. Damp rub resistance.

15 l 4 l 750 ml

15 l 4 l 750 ml

15 l 4 l 750 ml

15 l 4 l

15 l 10 l 4 l 2 l 750 ml

White / Semi-gloss (72.000)



Black / Matt (72.101)


Ecological certificated waterbased paint,

hypoallergenic and odourless.

Based on 100% solvent free vinyl polymers.Indoor use.TÜV and Euro ecolabel certifications.Water dilution and cleanliness.


1.3.2. Certified waterbased paints

JUNORAL N-5Matt / Quality certification

AENOR quality certificated waterbased paint (type II)

that guaranties over 5.000 wash cycles under

UNE 48243 procedures.

Based on water dispersed resins.Indoor use.Water dilution and cleanliness.

Recommended for standard use in building and decoration over cement or plaster in accordance with the prescribed and certificated memory project. Durable finishing withstands frequent washings. Great coverage and performance.

15 l 4 l 750 ml

White / Matt (73.040) Flameproof

B-s1,d0

1.3.4. Textured paints

1.3.3. Professional waterbased paints

CASTOR PICAR EXTRA

J-300Satin

J-28Matt

J-25Matt

CASTOR-NMatt / Quality certification

Thick textured paste.

Based on excellent hardness adherence and whiteness acrylic copolymers.Indoor use.Water dilution and cleanliness.

Waterbased paint.

Based on water dispersed resins.Indoor or outdoor.Water dilution and cleanliness.

Waterbased paint.

Based on acrylic copolymers, titanium bioxide and spread activators.Indoor use.Water dilution and cleanliness.

Waterbased paint.

Based on acrylic copolymers, titanium bioxide and spread activators.Indoor use.Water dilution and cleanliness.

AENOR quality certificated waterbased paint (type I)

that guaranties over 1.000 wash cycles under

UNE 48243 procedures.

Based on water dispersed resins.Indoor use.Water dilution and cleanliness.

Recommended to hide substrate imperfections on stairs, public spaces, offices or rooms.

Recommended for standard use in building and decoration over cement or plaster. Good whiteness, coverage and easy application. Damp rub resistance.

Recommended for standard use in building and decoration over cement or plaster, especially to hide substrate imperfections and visible joins in plasters. Damp rub resistance. Water steam permeable.

Recommended for standard use in building and decoration to hide substrate imperfections. Damp rub resistance.

Recommended for standard use in building and decoration over cement or plaster in accordance with the prescribed and certificated memory project. Durable finishing withstands frequent washings. Great coverage and performance.

15 l 10 l 4 l

15 l 4 l

15 l 4 l

15 l 4 l

15 l 4 l

White / Satin (71.055)





16 | Juno International Catalogue Colours are approximations and may vary once applied.!

CASTOR GOTA-PIK

Soft textured paste.

Based on excellent hardness adherence and whiteness acrylic copolymers.Indoor use.Water dilution and cleanliness.

Recommended to create fine droplet textures and hide substrate imperfections.

15 l

White (74.303)

1.3.5. Colorexpress customised production system

COLOREXPRESS Customised production system for coloured

waterbased paints that assures the perfect

homogenization of the quality and colour of the

paint, under the customer specifications.

Ask the commercial department for detailed information about this system.

15 l

Colours under request (73.700)

1.3.6. Colorants, Additives and Others

JUNORALWaterbased

UNIVERSAL JUNO

Concentrated liquid colorant.

Indoor use* and outdoor.Vermillion red, Lemon yellow and Metis green colorants are only suitable for indoor.

Universal concentrated colorant.

Indoor use* and outdoor. Vermillion red and Lemon yellow colorants are only suitable for indoor.

Recommended to dye any paint.The colorant proportion should not exceed 3%.

Recommended to dye any paint. The colorant proportion should not exceed 3%.

750 ml 125 ml

125 ml

Capri blue (78.013)

Vermillion red* (78.018)

Lemon yellow* (78.026)

Metis green* (78.055)

Mountain green (78.056)

Chamois (78.066)

Deep ochre (78.064)

Black (78.001)


Brown (78.080)

Blue (79.514)

Vermillion red* (79.518)

Lemon yellow* (79.526)

Green (79.555)

Black (79.501)

Oxide red (79.519)

Ochre yellow (79.565)

Brown (79.580)

MISKY-MISKYFungicide additive

JUNO GLUEGlue

Ready to add preparation with broad spectrum

fungicides.

Based on heterocyclic to perform an intense and long lasting broad spectrum action moulds and seaweeds.

Waterbased glue for manual artwork.

Recommended as additive for waterbased paints and coats to enhance the protective properties.Intensive shake before use.

125 ml

1 kg 500 gr 125 gr

White (82.101)

White (79.597)

!

!


1.4.1. Enamels

JUNOLACGlossy, satin or matt

Synthetic enamel.

Based on high solid alkyd resins and pigments.Indoor or outdoor (only glossy finishing).Solvent (D-16) dilution and cleanliness.

Recommended for metallic and wood surfaces. Application on thin coats to guarantee inner dryness.

4 l 750 ml 375 ml

4 l 750 ml 375 ml

4 l 750 ml

White (15.000)

Black (15.001)

Danube blue (15.006)

Horizon blue (15.007)

Cobalt blue (15.013)

Navy blue (15.014)

Bordeaux red (15.021)

Army grey (15.032)

Pearl grey (15.033)

Bluish grey (15.034)

Medium grey (15.037)

Green (15.057)

Ochre (15.065)

Dark ochre (15.074)

Leather (15.067)

British red (15.068)

Arabic brown (15.069)

Brown txoko (15.071)

Brown (15.073)

Glossy green (15.048)

Spring green (15.049)

Permanent green (15.050)

Cream (15.061)

Pine green (15.053)

Sea green (15.059)

Bone (15.060)

Chamois (15.066)

Orange (15.017)

Red (15.018)

Bright red (15.020)

Lemon yellow (15.026)

Golden yellow (15.027)

White (15.100) Black (15.101)

White (15.200) Black (15.201)

Glossy finishing

Satin finishing (only indoor)

Matt finishing (only indoor)

1.4. Enamels

JUNOLAC ANTIRUST

Glossy

Antirust synthetic enamel.

Based on resins and antirust additives.Indoor or outdoor.Solvent (D-16) dilution and cleanliness.

Recommended for metallic or steel surfaces where it’s not possible an intense preparation of the surface with an anti-rust primer (huge metallic structures, railings, fences, bridges).

4 l 750 ml

White (04.651) Black (04.652) Colours under request

JUNOPLUSGlossy, satin or matt

Synthetic.

Based on alkyd resins.Indoor or outdoor (only glossy finishing).Solvent (D-16) dilution and cleanliness.

Recommended for properly primed metallic, wood or masonry surfaces.

4 l 750 ml

4 l 750 ml

4 l 750 ml

White (16.000)

Black (16.001)

Blue (16.008)

Bright blue (16.010)

Light grey (16.031)

Cloud grey (16.038)

Dark grey (16.039)

Meadow green (16.054)

Moss green (16.058)

Arabic brown (16.069)

Medium yellow (16.029)

Ivory (16.005)

Traffic grey (16.006)

Chamois (16.002)

Ochre (16.007)

Brown (16.003)

Grass green (16.004)

Carriage red (16.021)

Blood red (16.022)

Carriage green (16.011)

Overseas blue (16.009)

Fire red (16.012)

White (16.100) Black (16.101)

White (16.200) Black (16.201)

Glossy finishing



Flameproof

B-s1,d0

!

!


OXIFORJA Wrought iron finishing synthetic with mica particles.

Based on alkyd resins and antirust pigments and additives that provide elasticity, bonding and highly water resistant properties.Indoor or outdoor.Solvent (D-16) dilution and cleanliness.

Recommended for lampposts, manhole covers, fences, benches, litter bins, metallic doors and any other urban furniture.

4 l 750 ml

Black (05.700)

Steel grey base (05.701)

Oxide red (05.723)

Annealed blue (05.720)

Gold (05.722)

Bronze green (05.721)

AQUALACGlossy, Satin or matt

Waterbased

Great coverage waterbased.

Based on acrylic resins with quick dry, low odour and great resistance to the outdoor.Indoor or outdoor (only glossy finishing).Water dilution and cleanliness.

Recommended for properly primed metallic, wood or masonry surfaces.

4 l 750 ml

4 l 750 ml

4 l 750 ml





Yellow base (10.304)

Red base (10.305)

White base / P (10.400) Medium base / D (10.402) Transparent base / TR (10.403)


Glossy finishing



1.4.2. Primers

MULTISUPPORT PRIMER

WORKSHOP PRIMER

METALEX

Preparatory synthetic primer.

Based on deep fixing resins with auto levelling finishing for easy paint.Indoor or outdoor.Solvent (D-17) dilution and cleanliness.

Quick drying preparatory synthetic primer.

Based on alkyd resins and ferric oxides.Indoor or outdoor.Solvent (D-16) dilution and cleanliness.

Antirust lead-free synthetic primer.

Based on soya oil resins and zinc phosphates.Indoor or outdoor.Solvent (D-16) dilution and cleanliness.

Recommended for ferric, metallic, aluminium, galvanised, PVC or indoor wood surfaces.

Recommended for the preparation of ferric surfaces.

Recommended for metallic (except aluminium and galvanised) surfaces that require field corrosion protection.

15 l 4 l 750 ml

15 l 4 l 750 ml

4 l 750 ml

White (27.040)

Oxide red (22.110) Grey (22.111)

White (27.000)

METALEX 212 Antirust synthetic primer.

Based on antirust resins.Indoor or outdoor.Solvent (D-16) dilution and cleanliness.

Recommended for ferric surfaces (doors, structures, fences, tanks) that require field corrosion protection.

4 l 750 ml

Orange (22.002)



!

!

!

!


1.4.3. Sealers

WATERPRIMWaterbased

Antirust synthetic primer.

Based on antirust resins.Indoor or outdoor.Water dilution and cleanliness.

Recommended for properly prepared ferric, metallic, aluminium, galvanised, PVC surfaces that require field corrosion protection and are located in poor ventilated areas.

4 l 750 ml

White (30.006)

AQUATAPAOdourless / Waterbased

Waterbased waterproof coat.

Based on anti damp resins.Indoor use.Water dilution and cleanliness.

Recommended for the protection of mineral or wood surfaces with water soluble stains, exposed to fumes, vapour or humidity condensation areas.

15 l 4 l 750 ml


ANTI-STAINOdourless / Preventive

Anti-stain preventive synthetic coat.

Based on plioway resins with anti-stain and anti-microbial properties to resist mildew.Indoor use.Solvent (D-69) dilution and cleanliness.

Recommended for any support with humidity, grease or nicotine stains.

15 l 4 l 750 ml

White (21.350)

HANGERS SEALER

AQUASELLPowder applied plaster

Waterbased

NATURSELLWaterbased

Synthetic coverage coat.

Based on high resistance and coverage alkyd resins.Indoor or outdoor.Solvent (D-16) dilution and cleanliness.

Waterbased coverage sealer.

Based on acrylic resins with high coverage and resistance.Indoor or outdoor.Water dilution and cleanliness.

Waterbased sealer.

Based on acrylic resins with high coverage and resistance.Indoor or outdoor.Water dilution and cleanliness.

Recommended to prepare wooden or masonry surfaces.

Recommended as a preparatory coat over substrates with severe differences in paint absorption (masonry, plaster joins o powder applied plasters).

Recommended for wooden and masonry surfaces.

15 l 4 l 750 ml

15 l

4 l 750 ml





1.5. Junomatic tintometric system

JUNOPROFSatin / Matt

JUNOMALTEGlossy / Satin

JUNOMATIC COLORANT

Waterbased base paint to dye.

Satin or matt finishing.Indoor or outdoor.Water dilution and cleanliness.

Synthetic base paint to dye.

Glossy or satin finishing.Indoor or outdoor (only glossy finishing).Solvent (D-16) dilution and cleanliness.

Colorant to dye waterbased or synthetic bases.

Recommended for standard use in building and decoration over cement or plaster.

Recommended for standard application on metallic and wooden surfaces.

Recommended for Junomatic tintometric system.

10 l 4 l 750 ml

4 l 750 ml

10 l 4 l 750 ml

4 l 750 ml

1 l





JS / Black (88.700)

TS / Oxide ochre (88.707)

WS / Oxide brown (88.710)

XS / Grey (88.711)

LS / Blue (88.701)

PS / Green (88.704)

KU / Oxide white (88.714)

NS / Red (88.703)

QS / Intense yellow (88.705)

RS / Intense blue (88.706)

VS / Intense red (88.709)

YS / Oxide red (88.712)

US / Orange (88.708)

MS / Yellow (88.702)

ZS / Violet (88.713)

BS / Magenta (88.715)

Satin finishing

Glossy finishing

Matt finishing

Satin finishing

1.6. Wood treatment and decoration1.6.1. Waterbased varnishes and woodprotectors

AQUEOUS FLOOR WOODPROTECTOR

Waterbased wood protector varnish, odourless.

Based on acrylic resins.Indoor use.Water cleanliness.

Recommended as easy to sand wood protector for any wooden surface. Great filling performance, easy odourless application and quick drying. It’s suggested to finishing with Aqueous floor varnish.

4 l

Colourless (82.414)

ANTI-DAMP SEALER

Quick drying synthetic waterproof coat.

Based on anti damp resins and cement particles.Indoor or outdoor.Solvent (D-16) dilution and cleanliness.

Recommended for occasional damp, grease or oil stains. Quick dry of the support to facilitate the paint or wallpaper.

4 l 750 ml





!


MULTITREATMENT (BONDEX)

EXTRA WOODPROTECTOR

(BONDEX)

Waterbased wood protector with active effect against

insects, termites and fungus.

Indoor or outdoor.Water cleanliness.

Waterbased wood protector varnish, odourless, with

active effect against insects, termites and fungus.

Indoor or outdoor.Water cleanliness.

Recommended for any kind of wooden surfaces, indoor or outdoor, that may require special preventive or curative treatments. Suitable for any later decorative finishing (lasur varnish, varnishing or decorative paint).


5 l 750 ml

5 l 750 ml

Colourless (41.250)

Colourless (41.201)

AQUEOUS FLOOR VARNISH

Glossy

AQUADUR VARNISH

Glossy, satin or matt

Odourless waterbased varnish.

Based on polyurethane resins that create a pleasant to the touch and yellowish resistant film.Indoor use.Water cleanliness.

Waterbased varnish.

Based on acrylic resins that create a pleasant to the touch and yellowish resistant film.Indoor use.Water cleanliness.

Recommended for any floor, due to the odourless and quick drying application, rub resistance properties and easy cleaning. It’s suggested the wood preparation with Aqueous Floor Woodprotector.

Recommended for any kind of wooden surfaces.

4 l 750 ml

4 l 750 ml

Colourless / Glossy (82.410)

Colourless / Glossy (82.480) Colourless / Satin (82.481) Colourless / Matt (82.482)

LASUR AQUEOUS

Waterbased damp-resistant lasur varnish, with deep

penetration properties.

Based on acrylic resins, colourless pigments and bactericides that create a micro porous and elastic film, UV resistant and transpired to the water vapour within the wood.Indoor or outdoor (except colourless).Water cleanliness.

Recommended for any wooden surface (doors, windows, fences, and porches) that once exposed to the weather conditions may diminish without getting chipped, so that it’s possible to renovate the beauty of the wood thanks to successive new applications, i.e., without removing old treatments.

4 l 750 ml

Colourless / Satin (82.451)

Chestnut (82.460)

Oregon pine (82.461)

Oak (82.462)

Rustic oak (82.463)

Walnut (82.464)

Mahogany (82.465)

Rosewood (82.466)

Teak (82.467)

Iroko (82.468)

CLASSIC WOODPROTECTOR

(BONDEX)

Wood protector with active effect against termites

and fungus.

Indoor or outdoor.Solvent (D-16) dilution.


5 l 750 ml

Colourless (41.200)

1.6.2. Synthetic varnishes and woodprotectors

!


1.6.3. Floor synthetic varnish

1.6.4. Outdoor synthetic varnishes

JUNODUR VARNISHGlossy or satin

Polyurethane synthetic varnish.

Based on alkyd resins that create a pleasant to the touch and yellowish resistant film.Indoor use.Solvent (D-16) cleanness.

Recommended to varnish or restore wooden floor that may require resistance to home cleaning products and daily use.

4 l 750 ml

Colourless / Glossy (44.001) Colourless / Satin (44.002)

JUNOLAC VARNISHGlossy or satin

Synthetic varnish with UV protection.

Based on alkyd resins that create a pleasant to the touch and yellowish resistant film.Indoor or outdoor (only glossy finishing).Solvent (D-16) dilution.


4 l 750 ml 375 ml

Amber / Glossy: 42.037 Colourless / Satin: 42.038

JUNOTINTE VARNISH

Glossy

Synthetic varnish with UV protection.

Based on alkyd resins and UV filters with decorative and protective properties.Indoor or outdoor.Solvent (D-16) cleanness.


750 ml 350 ml

Pine (42.040)

Walnut (42.041)

Mahogany (42.042)

Chestnut (42.043)

Teak (42.044)

Rosewood (42.045)

Oak (42.046)

CLASSIC LASUR (BONDEX)Matt or satin

Synthetic damp-resistant lasur varnish, with deep

penetration properties.

Based on specific resinsIndoor or outdoor.Solvent (D-16) cleanness.

Recommended for any wooden surface (doors, windows, fences, and porches) that once exposed to the weather conditions may diminish without getting chipped, so that it’s possible to renovate the beauty of the wood thanks to successive new applications, i.e., without removing old treatments. It’s suggested to coat a preparatory matt varnish and finish with 2 protective satin coats.

5 l 750 ml

Colourless / Matt (41.210)

Colourless / Satin (41.230)

Oak / Matt (41.211)

Oak / Satin (41.231)

Mahogany / Matt (41.212)

Mahogany / Satin (41.232)

Chestnut / Matt (41.213)

Chestnut / Satin (41.233)

Oregon pine / Matt (41.214)

Oregon pine / Satin (41.234)

Teak / Matt (41.215)

Teak / Satin (41.235)

Rosewood / Matt (41.216)

Rosewood / Satin (41.236)

Walnut / Matt (41.217)

Walnut / Satin (41.237)

Macasar / Matt (41.218)

Macasar / Satin (41.238)

California pine / Matt (41.219)

California pine / Satin (41.239)

YATCH SPAR VARNISH

Glossy

Synthetic spar varnish with weather and UV

resistance.

Based on elastic resins and UV filters with long lasting decorative and protective properties.Indoor or outdoor.Solvent (D-16) cleanness.

Recommended for wooden surfaces under extreme weather conditions such as intense humidity, rain, sea or permanent exposition to the sun.

4 l 750 ml

Amber / Glossy (42.036)

!

!


TEAK OIL (BONDEX)Tropical wood oil

Specific oiling for exotic wood.

Based on alkyd resins and UV filters.Indoor or outdoor.Solvent (D-16) cleanness.

Recommended to preserve and enhance the natural beauty of exotic and tropical wood, extend the duration and protection against the elements. Recommended for garden furniture as well as indoor quality woods.

4 l 750 ml

Colourless (41.252)

1.7. Plasters and fillers

FINISHING AND SMOOTHING

PLASTER

READY TO USE PLASTER

INDOOR PROFESSIONAL

PLASTER

OUTDOOR PROFESSIONAL

PLASTER

FILLER

MULTIUSE FILLER

FIBER PLASTER

Dust plaster for supports to be painted or

wallpapered.

Indoor use.Dust.

Ready to use high quality plaster.

Indoor use.Ready to use.

Ready to use high quality plaster.

Indoor use.Ready to use.

Ready to use plaster and filler.

Outdoor use.Ready to use.

Dust plaster for support preparation.

Indoor use.Dust.

Dust plaster for support preparation.

Indoor or outdoor.Dust.

Elastic ready to use plaster.

Indoor or outdoor.Ready to use.

Recommended to hide small imperfections, cracks, holes, marks, joining, etc.

Recommended for support preparation.

Recommended for intensive application.

Recommended for supports exposed to water conditions.

Recommended to smooth out supports before being painted or wallpapered.

Recommended to smooth-out supports before being painted.

Recommended to mend small cracks on supports.

15 kg 5 kg 1 kg

1 kg 500 g

5 kg

5 kg

15 kg 5 kg

1 kg

750 gr

Code (77.000)

Code (77.200)

Code (77.202)

Code (77.203)

Code (77.401)

Code (77.050)

Code (77.250)


1.8. Solvents

D-16Mineral

D-17Spray gun

D-40Chloro-Rubber

D-45Universal

D-69Odourless

D-70Junoretano

D-90Epoxy

Mineral solvent for enamels and synthetic primers.

Mineral solvent for enamels and synthetic primers.

Suitable for spray gun application.

Solvent for pliolite and chloro-rubber paints.

Universal diluent.

Solvent for plioway based paints.

Solvent for polyurethane based paints.

Solvent for epoxy based paints.

20 l 5 l 1 l 500 ml

Code (50.012)

Code (50.004)

Code (50.000)

Code (50.017)

Code (50.073)

Code (50.007)

Code (50.010)

D-15

PRIMER

STOVE

CLEAN

ALCOHOL

ZIAMAR

VINYL

Solvent for quick drying enamels.

Solvent for Shop primer.

Solvent for oven drying enamels.

Solvent for metallic surfaces.

Solvent for Dynapok S/D Epoxin.

Solvent for zinc silicate.

Solvent for vinyl paints.

Code (50.005)

Code (50.705)

Code (50.702)

Code (50.803)

Code (50.802)

Code (50.712)

Code (50.708)

2. Industrial sectorEfficiency, the answer to industrial requests. Paint treatments may be considered standard unless we start thinking about alternative uses not related to our daily use in decoration. Almost any support is suitable to be painted. Most of them need to be painted to improve protection. Industrial paint is characterised by intensive use, law regulations or companies’ high production standards, so the paint should be able to withstand demanding requirements and specifications. Industrial paints, if ever, require proactive R&D, trained staff and individual prescription so not all paint manufacturers are able to address the industrial sector.


2.1. Primers

2.1.1. Primers

DYNALINE PRIMER

DYNAPOK PRIMER

Zinc Phosphate2 components

CHLORO-RUBBER PRIMER

Zinc Phosphate

DYNAPOK THICK COAT

PRIMER2 components

SHOP PRIMER

EPOXI SHOP PRIMER

2 components

Quick drying protective primer.

Based on alkyd resins. Apply over a suitable anti-oxidant primer to prevent substrate corrosion, in order to achieve a fully guaranteed, long-lasting and effective protection.Outdoor use.Solvent (D-17) dilution and cleanliness.

High adherence two components epoxy primer.

Based on epoxy resin cured with amine adducts and an anticorrosive pigment blends.Indoor or outdoor.Solvent (D-90) dilution and cleanliness.

High adherence and resistance chloro-rubber primer.

Based on chlorinated-rubber resins and zinc phosphate pigments combined with non-saponifiable plasticers.Indoor or outdoor.Solvent (D-40) dilution and cleanliness.

Two components high-body primer epoxy.

Based on epoxy resins and zinc phosphate pigments. Free from lead and chromates.Solvent (D-90) dilution and cleanliness.

Quick drying primer.

Based on phenol reactive polyvinyl - butiral resin and anti-corrosive pigments.Primer solvent dilution and cleanliness.

High adherence and quick drying two components

primer epoxy.

Based on a combination of phenolyc reactive polyvinyl-butiral resin and anti-corrosive pigments.Indoor or outdoor.Solvent (D-15) dilution and cleanliness.

Recommended for the protection of all kinds of iron and steel surfaces, such as machinery, cranes, fencing, etc. It provides over 40 micrometres per coat.

Recommended as a primer for POXEMYC and DYNAPOK systems, according to specifications.

Recommended to protect outdoor exposed steel surfaces. Good adherence on galvanised steel surfaces.

Recommended for the protection of metal and steel surfaces in chemicals, marine or industrial environments. It’s also suitable as middle coat in DYNAPOK and POXEMYC systems, according to specifications. It provides over 60 micrometres per coat.

Recommended for efficient protection between sandblasting and calamine removing processes and the final paint application is desired. It also provides good results when applied to light-alloy based polished surfaces and copper and lead surfaces. It is recommended as primer for systems exposed to high temperatures up to 200 °C maximum. It does not affect welding lines, and does not form pores. Line edges remain intact and it does not propagate flames. It provides over 15 micrometres per coat. The use of nitrocellulose, chloro-rubber, vinyl and some special coal-tar paints for repainting is not recommended.

Recommended for steel and iron surfaces, whenever efficient protection between sandblasting and calamine removing processes and the final paint application is desired. It also provides good results when applied to light-alloy based polished surfaces and copper and lead surfaces. It is recommended as primer for systems exposed to high temperatures up to 200 °C maximum. It provides over 15 micrometres per coat.

20 kg 5 kg

15 l 4 l

15 l

15 l

15 l

15 l

Grey (22.807) Red (22.812)

Grey (22.722) Red (22.700)

Grey (21.855)

Reddish brown (22.725) Grey (22.726)

Black (24.701) Grey (24.714) Red (24.712)

Red (24.725) Grey (24.726)

Flame-proof M1

!

!

!

!

!

!


2.1.2. High zinc content primers

2.1.3. Middle coatings

ZIAMAR E.T. PRIMER

2 components

DYNAPOK HB

2 components

ZINC EPOXI PRIMER

2 components

DYNAPOK HBAC

2 components

High zinc content two components coating.

Based on zinc-ethyl silicate with excellent corrosive and abrasion resistance, UV radiation resistance, temperature resistance (400 °C in continuous regime), resistance to alcohols (methyl, ethyl, butyl, amyl, glycerine), petrol derivatives (fuel oil, gas oil, gasoline, kerosene, white spirit, aromatic hydrocarbon), ketenes (methyl isobutyl ketene, amyl methyl ketene) and mineral oil resistance.E.T. solvent dilution and cleanliness.

Thick coat two components epoxy coating.

Based on epoxy resins and hardeners that provide excellent flexibility and abrasion-resistant hardness, waterproof properties and petrol, lube oils and similar products splashes resistance.Solvent (D-90) dilution and cleanliness.

High zinc content two components coating.

Based on epoxy resin pigmented with metallic zinc powder and cured with polyamide. The high zinc powder content isolates and inhibits metal from oxidation, providing cathode protection.Solvent (D-90) dilution and cleanliness.

High solid content two components epoxy coating.

Solvent (D-90) dilution and cleanliness.

Recommended as anti-corrosive primer for metal structures, bridges, tanks, silos, off-shore platforms, vessel hulls.

Recommended as middle layer in DYNAPOK & POXEMYC systems and for previously primed ferrous surfaces exposed to aggressive and industrial environments, such as tanks, structures, lifting gear and transports. It provides 80-100 micrometres per coat.Micaceous grey (7.751) facilitates the second paint.

Recommended as anti-corrosive primer in epoxy systems, to offer long-term protection for steel surfaces exposed to highly corrosive marine or industrial environments.

Recommended for surfaces where sandblasting is not recommended and manual cleaning is required instead. It provides over 125 micrometres per coat.

15 l

15 l

15 l

15 l

Greenish Grey (25.700)

Micaceous grey (7.751) Grey (7.750) White (7.75_)

Grey (22.800) INTA grey 164414 (22.805)

Aluminium (7.765) White (7.760) Grey shades (7.76_)

2.2. Enamels

2.2.1. Enamels

DYNALINE S/RQuick drying

Quick drying synthetic enamel.

Based on alkyd resins.Solvent (D-17) dilution and cleanliness.

Recommended for the protection of all kinds of iron and steel surfaces, such as machinery, cranes, fencing, etc.Apply over a suitable anti-oxidant primer to prevent substrate corrosion, in order to achieve a fully guaranteed, long-lasting and effective protection. It’s recommended to repaint before 24 h.

15 l


!

!

!

!


DYNADUR S/HOven drying

DYNAMOL INDUSTRIAMetallic surfaces

DYNAMOL FLOORS

PAVIMYC FLOORS2 components

Oven drying (110-150 °C) enamel.

Based on glytherophthalic resins, urea formaldehyde resins and melamine resins hardeners, combined with inert pigments.Solvent (stove) dilution and cleanliness.

Chloro-rubber enamel with smooth satin finish.

Based on chloro-rubber and non-saponifiable plasticers combined with pigments and inert extenders. It combines excellent chemical and mechanical resistance with easy to apply and quick drying properties.Indoor or outdoor.Solvent (D-40) dilution and cleanliness.

Chloro-rubber enamel with plastic finishing effect.

Based on chloro-rubber and non-saponifiable plasticersIndoor or outdoor.Solvent (D-40) dilution and cleanliness.

Two components epoxy enamel for the protection of

concrete pavements and metallic surfaces.

Based on epoxy polyamide resins with excellent hardness and adherence while preventing the premature damage of concrete and dust.Indoor use.Solvent (D-90) dilution and cleanliness.

Recommended as widely use enamel with excellent mechanical and chemical properties. Apply preferably on pre-treated or primed surfaces. It combines easy application and quick drying at average temperatures while providing a smooth glossy finish. This enamel is suitable for any type of devices, especially serially produced, as due to its characteristics is ideal for series chain painting in applications (storage racks, instruments, metal cupboards, machinery parts, tools, etc.)

Recommended for the protection of metal structures exposed to marine or industrial environments where withstanding the action or occasional direct contact to aggressive, acid or alkali agents is required.

Recommended for surfaces exposed to marine or industrial environments such as roads, garages, sport facilities, etc.It’s not suitable for asphaltic surfaces.

Recommended for weathering exposed concrete floors in indoor car parks, garages, laboratories, chemical and pharmaceutical plants, sugar and petrol refineries, electroplating, mechanical workshops, and in general for any type of old and new industrial floorings. Also suitable for wooden floors.

15 l

15 l

15 l 4 l

15 l



White (09.500)

Black (09.501)

Pearl grey (09.533)


Tennis red (09.568)

British red (7.812) Green (7.814) Grey (7.807)

DYNAPOK2 components

WATERBASED DYNAPOK

2 components

Two components epoxy enamel with great hardness

and glossy finish.

Based on epoxy polyamide resins with excellent properties against water, grease, acids or diluted alkali.Indoor use.Solvent (D-90) dilution and cleanliness.

Two components waterbased epoxy enamel.

Based on epoxy resin-reactive binder with a blend of pigments and load matter, and water dissolved hardener.Water dilution and cleanliness.

Recommended for metallic surfaces chemical and pharmaceutical plants, sugar and petrol refineries, electroplating, mechanical workshops, and in general for any type of old and new industrial floorings. It is also recommended to paint unpolished concrete floors.

Recommended as general purpose industrial concrete coating for asphalt surfaces not sufficiently ventilated, where the application of conventional paints containing organic solvents would create a highly toxic atmosphere.

15 l

15 l

White (7.700) Colours under request

White 9010 (7.900) White 9003 (7.910) Colours under request

DYNAPOK EPOXIN S/D

2 components

Anti-corrosive solvent-free two components epoxy.

Based on epoxy resins with high chemical resistance, hardness and lack of any toxicity contamination.

Recommended for the interior protection of concrete or steel tanks and silos in food industries. Once the mixture is diluted, to be apply in less than 20 min.

4 l

White (7.952) Red (7.950)

Flameproof

B-s1,d0

!

!

!


2.2.2. Aluminium Enamels

POXEMYC UV ALUMINIUM

2 components

POXEMYC UV2 components

DYNAVIL

Two components polyurethane enamel with smooth

glossy finishing.

Based on acrylic resins, inert pigments and hardeners with maximum resistance to the outdoor, UV and heat (up to 150 °C).Solvent (D-17) dilution and cleanliness.

Two components polyurethane enamel with great

resistance to acids, solvents, abrasion, weathering,

light, and even good resistance to heat (up to 150 °C).

Based on hydroxilated acrylic resins combined with inert pigments and multipurpose aliphatic isocyanine hardener.Solvent (D-17) dilution and cleanliness.

Vinyl.

Based on vinyl chloride and vinyl acetate copolymers with non-saponifiable plasticizers and inert pigments.

Recommended for any metallic, wood, fibreglass or PVC surface that may require decorative finishing (facades, monuments) to be exposed to aggressive and industrial environments (tanks, structures, lifting gear and transports.

Recommended for metallic, concrete, wood, polyester with glass fibre or PVC surfaces, particularly where maximum ageing resistance is required, either to weathering, chemical agents or heat up to 150 °C. Ideal for wagons or cisterns, tanks, machinery, vessels, industrial buildings with aggressive atmospheres.

Recommended for painting and marking of textile or canvas surfaces.

15 l 4 l

15 l

1 l

Aluminium 9006 (8.824) Aluminium 9007 (8.847)

White (8.800) Colours under request

White (13.700)

Green (13.712)

Yellow (13.702)

Blue (13.705)

Red (13.711)

METALLIC ALUMINIUM

FLAME ALUMINIUM

OUTDOOR ALUMINIUM

DESOXIDINA ALUMINIUM

Aluminium enamel with smooth glossy finishing.

Based on polyurethane modified resins and aluminium metallic powder.Solvent (D-40 or D-17) dilution and cleanliness.

Thermo-stable metallic enamel.

Based on silicone and alkyd resins pigmented with aluminium metallic powder.Solvent (D-17) dilution and cleanliness.

Aluminium enamel with smooth glossy finishing.

Based on phenol resin and aluminium metallic powder.Solvent (D-45 or D-17) dilution and cleanliness.

High temperature metallization process enamel.

Based on urea formaldehyde and alkyd resins pigmented with aluminium metallic powder.Solvent (D-15) dilution and cleanliness.

Recommended as finishing coat for all kinds of metallic surfaces, due to its anticorrosive and waterproofing properties and maximum humidity resistance.

Recommended for the protection of metallic components exposed through long time periods to temperatures up to 650 °C. Note that painted surfaces can not be suddenly exposed to temperature rises as blisters may be formed, temperatures up to 350 °C must be gradually achieved instead.

Recommended as finishing coat for all kinds of metallic surfaces, due to its anticorrosive and waterproofing properties and maximum humidity resistance.

Recommended for marking areas on iron, steel, stainless steel or nickel surfaces which must be welded or assembled. It protects surfaces against oxidation by providing a protective action until the final casting and assembly. It is suitable for high temperature (600 °C) application, where the steel metal surfaces can not be sandblasted as it fixes aluminium to the metal substrate protecting it against oxidation and providing it with an aluminium metallic finish.

15 l

15 l

15 l 4 l

15 l

Aluminium 9006 (5.802) Aluminium 9007 (5.807)

Aluminium, not exceeding 350 °C (5.850) Aluminium not exceeding 650 °C (5.851)

Aluminium (5.806)

Aluminium (5.805)

!

!

!

!

!

!

Flame-proof M1


2.3. Special industrial paints

2.3.1. Intumescent paint

2.3.2. Bituminous paints

2.3.3. Antigraffiti varnish

WIP

DYNAPOK ASPHALT2 components

ANTIGRAFFITI VARNISH2 components

ASPHALT MASTIC

Waterbased intumescent (thermal-insulating) paint

with fire-extinguishing properties.

The paint reacts when exposed and in contact with fire, creating thermal-insulating intumescences and releasing fire-extinguishing salts which avoid the inflammation of combustible materials and delays the destruction of metallic structures, while maintaining its mechanical properties.Ready to use, do not dilute.Water cleanliness.

Bituminous two components epoxy paint.

Based on epoxy resins with maximum resistance, adherence and mechanical properties.Solvent (D-90) dilution and cleanliness.

Two components polyurethane glossy varnish.

Solvent (D-70) dilution and cleanliness.

Bituminous paint.

Based on natural asphalts and petrol oxy asphalts combined with non-saponifiable resins and inert extenders.Solvent (D-17) dilution and cleanliness.

Recommended for the protection of steel structures in buildings, department stores, shops, hospitals, clubs, hotels, restaurants, offices, schools and any other facility where fire damage protection is needed. Official certification (LICOF) against fire: 30-60 minutes.

Recommended to protect metal surfaces under continuous or alternate immersion in fresh water or salt water, highly corrosive atmospheres, and aggressive alkali and moderately acid ic chemicals immersion.

Recommended to facilitate the cleaning process of graffiti on facades. The treatment must be applied in advance.

Recommended to provide protection for all kinds of substrates where appearance is not a key factor, such as containers and wagons, underground tanks or piping in direct contact with water or weathering, gates, bridges, ports, etc. It provides over 50 micron per coat.

20 kg

15 l

4 l

15 l

White (89.050)

Black (7.850)

Colourless (44.270)

Black (87.702)

since 1927

www.junoindustrial.com | [email protected]

(03.

0112

/v1)

JUNO International catalogue

Documents

Transcript of JUNO International catalogue