JTT Rulmeca
-
Upload
crossmind-reklamebureau -
Category
Documents
-
view
236 -
download
3
description
Transcript of JTT Rulmeca
Moving ahead.
RULMECA LAUNCH NEW RANGE OF PU SCRAPERS
We are pleased and excited to launch our new product range of conveyor PU scrapers.
Your BULK Handling team in Denmark
Moving ahead. 3
RULMECA SCRAPER PU 83
The Pu 83 pre-scraper 8300 truly symbolizes our aim of making simple, effective scrapers made for pulleys ø220-1000 mm.
Simplicity: the scraper strip is easy to remove from the beam (without tools) for replacement and cleaning. Simple holders guarantee easy fitting and functionality . A lever arm that is fixed to the frame using a chainproduces the required scraper pressure.
B-W 400-2000mm.
B-W
400500650800100012001400160018002000
SCRAPING WIDTH
35045055070090010501250145016501850
BEAM LENGTH
1150125013501500170018502050225024502650
Rulli Rulmeca S.p.A - 24011 Almè (BG) - Italia - Via A. Toscanini,1
Tel: 035 4300111 Fax: 035 545523 E.mail: [email protected] Web: www.rulmeca.com
Rulmeca Scraper PU 83
The Pu 83 pre-scraper 8300 truly symbolizes our aim of making simple, effective scrapers made for pulleys ø220-1000 mm. Simplicity: the scraper strip is easy to remove from the beam (without tools) for replacement and cleaning. Simple holders guarantee easy fitting and functionality . A lever arm that is fixed to the frame using a chain produces the required scraper pressure. B-W 400-2000mm
B-W SCRAPING WIDTH BEAM LENGTH
400 350 1150 500 450 1250 650 550 1350 800 700 1500
1000 900 1700 1200 1050 1850 1400 1250 2050 1600 1450 2250 1800 1650 2450 2000 1850 2650
Moving ahead.4
RULMECA SCRAPER PU 88
The PU 88 is a stable plough with steel frame and exchangeable PU-scraper strips.When fitting the plough, a tube of diameter 40 mm is threaded through the PU link.The tube is then fixed to the frame of the conveyor.The plough can be modified for reversible drive.
B-W 400-1800mm.
B-W
400500650800
10001200140016001800
L
380430510570680780880980
1080
Moving ahead.4
RULMECA SCRAPER PU 88
The PU 88 is a stable plough with steel frame and exchangeable PU-scraper strips.When fitting the plough, a tube of diameter 40 mm is threaded through the PU link.The tube is then fixed to the frame of the conveyor.The plough can be modified for reversible drive.
B-W 400-1800mm.
B-W
40050065080010001200140016001800
L
3804305105706807808809801080
33
Moving ahead. 3
RULMECA SCRAPER PU 83
The Pu 83 pre-scraper 8300 truly symbolizes our aim of making simple, effective scrapers made for pulleys ø220-1000 mm.
Simplicity: the scraper strip is easy to remove from the beam (without tools) for replacement and cleaning. Simple holders guarantee easy fitting and functionality . A lever arm that is fixed to the frame using a chainproduces the required scraper pressure.
B-W 400-2000mm.
B-W
400500650800100012001400160018002000
SCRAPING WIDTH
35045055070090010501250145016501850
BEAM LENGTH
1150125013501500170018502050225024502650
Rulli Rulmeca S.p.A - 24011 Almè (BG) - Italia - Via A. Toscanini,1
Tel: 035 4300111 Fax: 035 545523 E.mail: [email protected] Web: www.rulmeca.com
Rulmeca Scraper PU 83
The Pu 83 pre-scraper 8300 truly symbolizes our aim of making simple, effective scrapers made for pulleys ø220-1000 mm. Simplicity: the scraper strip is easy to remove from the beam (without tools) for replacement and cleaning. Simple holders guarantee easy fitting and functionality . A lever arm that is fixed to the frame using a chain produces the required scraper pressure. B-W 400-2000mm
B-W SCRAPING WIDTH BEAM LENGTH
400 350 1150 500 450 1250 650 550 1350 800 700 1500
1000 900 1700 1200 1050 1850 1400 1250 2050 1600 1450 2250 1800 1650 2450 2000 1850 2650
Moving ahead.4
RULMECA SCRAPER PU 88
The PU 88 is a stable plough with steel frame and exchangeable PU-scraper strips.When fitting the plough, a tube of diameter 40 mm is threaded through the PU link.The tube is then fixed to the frame of the conveyor.The plough can be modified for reversible drive.
B-W 400-1800mm.
B-W
40050065080010001200140016001800
L
3804305105706807808809801080
Moving ahead. 3
RULMECA SCRAPER PU 83
The Pu 83 pre-scraper 8300 truly symbolizes our aim of making simple, effective scrapers made for pulleys ø220-1000 mm.
Simplicity: the scraper strip is easy to remove from the beam (without tools) for replacement and cleaning. Simple holders guarantee easy fitting and functionality . A lever arm that is fixed to the frame using a chainproduces the required scraper pressure.
B-W 400-2000mm.
B-W
400500650800100012001400160018002000
SCRAPING WIDTH
35045055070090010501250145016501850
BEAM LENGTH
1150125013501500170018502050225024502650
Rulli Rulmeca S.p.A - 24011 Almè (BG) - Italia - Via A. Toscanini,1
Tel: 035 4300111 Fax: 035 545523 E.mail: [email protected] Web: www.rulmeca.com
Rulmeca Scraper PU 83
The Pu 83 pre-scraper 8300 truly symbolizes our aim of making simple, effective scrapers made for pulleys ø220-1000 mm. Simplicity: the scraper strip is easy to remove from the beam (without tools) for replacement and cleaning. Simple holders guarantee easy fitting and functionality . A lever arm that is fixed to the frame using a chain produces the required scraper pressure. B-W 400-2000mm
B-W SCRAPING WIDTH BEAM LENGTH
400 350 1150 500 450 1250 650 550 1350 800 700 1500
1000 900 1700 1200 1050 1850 1400 1250 2050 1600 1450 2250 1800 1650 2450 2000 1850 2650
4
Moving ahead. 5
RULMECA SCRAPER PU 89
PU 89 is a robust pre-scraper that effectively cleans the conveyor belt in tough operating environments. Made for pulleys ø400 - 1000 mm.The scraper blade is a solid polyurethane strip that adapts to the shape of the conveyor belt and pulley. Changing the blade is very easy and can be done without any tools. The scraper has been designed with a minimum of moving parts.
B-W 650-1400mm.
B-W
650800100012001400
SCRAP WIDTH
54569589510951295
BEAM LENGTH
8501300150017001900
Rulli Rulmeca S.p.A - 24011 Almè (BG) - Italia - Via A. Toscanini,1Tel: 035 4300111 Fax: 035 545523 e.mail: [email protected] Web: www.rulmeca.com
Rulmeca Scraper PU 89
PU 89 is a robust pre-scraper that effectively cleans the conveyor belt in tough operating environments. Made for pulleys ø400 - 1000 mm. The scraper blade is a solid polyurethane strip that adapts to the shape of the conveyor belt and pulley. Changing the blade is very easy and can be done without any tools. The scraper has been designed with a minimum of moving parts. B-W 650-1400mm
B-W SCRAP WIDTH BEAM LENGTH 650 545 850 800 695 1300
1000 895 1500 1200 1095 1700 1400 1295 1900
Rulli Rulmeca S.p.A - 24011 Almè (BG) - Italia - Via A. Toscanini,1Tel: 035 4300111 Fax: 035 545523 e.mail: [email protected] Web: www.rulmeca.com
Rulmeca Scraper PU 89
PU 89 is a robust pre-scraper that effectively cleans the conveyor belt in tough operating environments. Made for pulleys ø400 - 1000 mm. The scraper blade is a solid polyurethane strip that adapts to the shape of the conveyor belt and pulley. Changing the blade is very easy and can be done without any tools. The scraper has been designed with a minimum of moving parts. B-W 650-1400mm
B-W SCRAP WIDTH BEAM LENGTH 650 545 850 800 695 1300
1000 895 1500 1200 1095 1700 1400 1295 1900
Moving ahead.6
Rulli Rulmeca S.p.A - 24011 Almè (BG) - Italia - Via A. Toscanini,1Tel: 035 4300111 Fax: 035 545523 e.mail: [email protected] Web: www.rulmeca.com
Rulmeca Scraper PU 91
The PU 91 pre-scraper with scraper segments that flex individually. It is fitted at the front of the drive pulley, with the pu-blades just below the horizontal centre line of the pulley, at right angles to the conveyor belt.
Can be fitted with tungsten-carbide blades.
B-W 400-2400mm
B-W SEGMENTS SCRAPING WIDTH BEAM LENGTH 400 4 400 1100 500 5 500 1200 650 6 600 1300 800 7 700 1500
1000 9 900 1700 1200 11 1100 1900 1400 13 1300 2100 1600 15 1500 2300 1800 17 1700 2500 2000 19 1900 2700 2400 22 2200 2900
RULMECA SCRAPER PU 91
The PU 91 pre-scraper with scraper segments that flex individually. It is fitted at the front of the drive pulley, with the pu-blades just below the horizontal centre line of the pulley, at right angles to the conveyor belt.
Can be fitted with tungsten-carbide blades.
B-W 400-2400mm.
B-W
400500650800
1000120014001600180020002400
SEGMENTS
45679
111315171922
SCRAPING WIDTH
400500600700900
110013001500170019002200
BEAM LENGTH
11001200130015001700190021002300250027002900
Moving ahead.4
RULMECA SCRAPER PU 88
The PU 88 is a stable plough with steel frame and exchangeable PU-scraper strips.When fitting the plough, a tube of diameter 40 mm is threaded through the PU link.The tube is then fixed to the frame of the conveyor.The plough can be modified for reversible drive.
B-W 400-1800mm.
B-W
40050065080010001200140016001800
L
3804305105706807808809801080
5
Moving ahead. 5
RULMECA SCRAPER PU 89
PU 89 is a robust pre-scraper that effectively cleans the conveyor belt in tough operating environments. Made for pulleys ø400 - 1000 mm.The scraper blade is a solid polyurethane strip that adapts to the shape of the conveyor belt and pulley. Changing the blade is very easy and can be done without any tools. The scraper has been designed with a minimum of moving parts.
B-W 650-1400mm.
B-W
650800100012001400
SCRAP WIDTH
54569589510951295
BEAM LENGTH
8501300150017001900
Rulli Rulmeca S.p.A - 24011 Almè (BG) - Italia - Via A. Toscanini,1Tel: 035 4300111 Fax: 035 545523 e.mail: [email protected] Web: www.rulmeca.com
Rulmeca Scraper PU 89
PU 89 is a robust pre-scraper that effectively cleans the conveyor belt in tough operating environments. Made for pulleys ø400 - 1000 mm. The scraper blade is a solid polyurethane strip that adapts to the shape of the conveyor belt and pulley. Changing the blade is very easy and can be done without any tools. The scraper has been designed with a minimum of moving parts. B-W 650-1400mm
B-W SCRAP WIDTH BEAM LENGTH 650 545 850 800 695 1300
1000 895 1500 1200 1095 1700 1400 1295 1900
Rulli Rulmeca S.p.A - 24011 Almè (BG) - Italia - Via A. Toscanini,1Tel: 035 4300111 Fax: 035 545523 e.mail: [email protected] Web: www.rulmeca.com
Rulmeca Scraper PU 89
PU 89 is a robust pre-scraper that effectively cleans the conveyor belt in tough operating environments. Made for pulleys ø400 - 1000 mm. The scraper blade is a solid polyurethane strip that adapts to the shape of the conveyor belt and pulley. Changing the blade is very easy and can be done without any tools. The scraper has been designed with a minimum of moving parts. B-W 650-1400mm
B-W SCRAP WIDTH BEAM LENGTH 650 545 850 800 695 1300
1000 895 1500 1200 1095 1700 1400 1295 1900
Moving ahead.6
Rulli Rulmeca S.p.A - 24011 Almè (BG) - Italia - Via A. Toscanini,1Tel: 035 4300111 Fax: 035 545523 e.mail: [email protected] Web: www.rulmeca.com
Rulmeca Scraper PU 91
The PU 91 pre-scraper with scraper segments that flex individually. It is fitted at the front of the drive pulley, with the pu-blades just below the horizontal centre line of the pulley, at right angles to the conveyor belt.
Can be fitted with tungsten-carbide blades.
B-W 400-2400mm
B-W SEGMENTS SCRAPING WIDTH BEAM LENGTH 400 4 400 1100 500 5 500 1200 650 6 600 1300 800 7 700 1500
1000 9 900 1700 1200 11 1100 1900 1400 13 1300 2100 1600 15 1500 2300 1800 17 1700 2500 2000 19 1900 2700 2400 22 2200 2900
RULMECA SCRAPER PU 91
The PU 91 pre-scraper with scraper segments that flex individually. It is fitted at the front of the drive pulley, with the pu-blades just below the horizontal centre line of the pulley, at right angles to the conveyor belt.
Can be fitted with tungsten-carbide blades.
B-W 400-2400mm.
B-W
4005006508001000120014001600180020002400
SEGMENTS
45679111315171922
SCRAPING WIDTH
400500600700900110013001500170019002200
BEAM LENGTH
11001200130015001700190021002300250027002900
Moving ahead. 3
RULMECA SCRAPER PU 83
The Pu 83 pre-scraper 8300 truly symbolizes our aim of making simple, effective scrapers made for pulleys ø220-1000 mm.
Simplicity: the scraper strip is easy to remove from the beam (without tools) for replacement and cleaning. Simple holders guarantee easy fitting and functionality . A lever arm that is fixed to the frame using a chainproduces the required scraper pressure.
B-W 400-2000mm.
B-W
400500650800100012001400160018002000
SCRAPING WIDTH
35045055070090010501250145016501850
BEAM LENGTH
1150125013501500170018502050225024502650
Rulli Rulmeca S.p.A - 24011 Almè (BG) - Italia - Via A. Toscanini,1
Tel: 035 4300111 Fax: 035 545523 E.mail: [email protected] Web: www.rulmeca.com
Rulmeca Scraper PU 83
The Pu 83 pre-scraper 8300 truly symbolizes our aim of making simple, effective scrapers made for pulleys ø220-1000 mm. Simplicity: the scraper strip is easy to remove from the beam (without tools) for replacement and cleaning. Simple holders guarantee easy fitting and functionality . A lever arm that is fixed to the frame using a chain produces the required scraper pressure. B-W 400-2000mm
B-W SCRAPING WIDTH BEAM LENGTH
400 350 1150 500 450 1250 650 550 1350 800 700 1500
1000 900 1700 1200 1050 1850 1400 1250 2050 1600 1450 2250 1800 1650 2450 2000 1850 2650
6
Moving ahead. 7
Rulli Rulmeca S.p.A - 24011 Almè (BG) e.mail: [email protected]
Rulmeca Scraper
PU 92 secondary scraper is placed below the drive pulley. The pressure of the PU strip against the belt is produced by two predimensions of the scraper can be continuously adjusted. The scraper cannot be used on belts with reversible operations. Can be fitted with tungsten-carbide blades.
B-W 400-2000
B-W SCRAP400 500 650 800
1000 1200 1400 1600 1800 2000
24011 Almè (BG) - Italia - Via A. Toscanini,1Tel: 035 4300111 Fax: 035 545523 [email protected] Web: www.rulmeca.com
Rulmeca Scraper PU 92
PU 92 secondary scraper is placed below the drive pulley. The pressure of the PU strip against the belt is produced by two pre tensioned torsion springs. The installation dimensions of the scraper can be continuously adjusted. The scraper cannot be used carbide blades.
SCRAPING WIDTH L- LENGTH 400 482-582 500 582-682 600 682-782 700 840-940 900 1040-1140
1100 1240-1340 1300 1440-1540 1500 1700-1800 1700 1900-2000 1900 2100-2200
Tel: 035 4300111 Fax: 035 545523
PU 92 secondary scraper is placed below the drive pulley. The pressure of the PU strip springs. The installation dimensions of the scraper can be continuously adjusted. The scraper cannot be used
RULMECA SCRAPER PU 92
PU 92 secondary scraper is placed below the drive pulley. The pressure of the PU strip against the belt is produced by two pre tensioned torsion springs. The installation dimensions of the scraper can be continuously adjusted. The scraper cannot be usedon belts with reversible operations.
Can be fitted with tungsten-carbide blades.
B-W 400-2000.
B-W
400500650800100012001400160018002000
SCRAPING WIDTH
40050060070090011001300150017001900
BEAM LENGTH
482-582582-682682-782840-940
1040-11401240-13401440-15401700-18001900-20002100-2200
Rulli Rulmeca S.p.A - 24011 Almè (BG) e.mail: [email protected]
Rulmeca Scraper
PU 92 secondary scraper is placed below the drive pulley. The pressure of the PU strip against the belt is produced by two predimensions of the scraper can be continuously adjusted. The scraper cannot be used on belts with reversible operations. Can be fitted with tungsten-carbide blades.
B-W 400-2000
B-W SCRAP400 500 650 800
1000 1200 1400 1600 1800 2000
24011 Almè (BG) - Italia - Via A. Toscanini,1Tel: 035 4300111 Fax: 035 545523 [email protected] Web: www.rulmeca.com
Rulmeca Scraper PU 92
PU 92 secondary scraper is placed below the drive pulley. The pressure of the PU strip against the belt is produced by two pre tensioned torsion springs. The installation dimensions of the scraper can be continuously adjusted. The scraper cannot be used
carbide blades.
SCRAPING WIDTH L- LENGTH 400 482-582 500 582-682 600 682-782 700 840-940 900 1040-1140
1100 1240-1340 1300 1440-1540 1500 1700-1800 1700 1900-2000 1900 2100-2200
Tel: 035 4300111 Fax: 035 545523
PU 92 secondary scraper is placed below the drive pulley. The pressure of the PU strip springs. The installation
dimensions of the scraper can be continuously adjusted. The scraper cannot be used
Rulli Rulmeca S.p.A - 24011 Almè (BG) - Italia - Via A. Toscanini,1 Tel: 035 4300111 Fax: 035 545523 e.mail: [email protected] Web: www.rulmeca.com
MAINTENANCE Inspect and clean the scraper regularly– we suggest once a week. When half the strip height remains, change it (2). Change the segments by undoing the M8 nuts and flat iron bar. Bolt on the new strip. Set the scraper. Set the torsion element using a pipe wrench and lock the bolt. Readjust the scraper pressure so as to achieve optimal cleaning. There must be no vibrations or noise. However, vibrations may arise when the belt is run without material or when the belt has a coating of resin. In the long term, vibrations may result in cracking of the beam. These must therefore be eliminated. Try therefore: …… changing the angle of the blade against the belt a few degrees …… changing the pressure of the blade against the belt. …… making a more robust attachment to the frame. …… increasing the mass of the beam (1) by, for example, fitting a small lever arm to the beam (1). WARRANTY Damage to the scraper caused by incorrect handling or in connection with incorrect installation cannot be considered to be covered by warranty if these instructions have not been followed. We therefore accept no claims for any consequential damage or loss.
B-W L at standard øD A Fixing bolt Tightening F beam length torque
400 482-582 58 166 M10 49 Nm 9º - 14º 500 582-682 58 166 M10 49 Nm 11º - 16º 650 682-782 58 166 M10 49 Nm 12º - 18º 800 840-940 78 208 M12 86 Nm 10º - 15º 1000 1040-1140 78 208 M12 86 Nm 13º - 18º 1200 1240-1340 78 208 M12 86 Nm 15º - 21º 1400 1440-1540 78 208 M12 86 Nm 17º - 23º 1600 1700-1800 95 260 M16 210 Nm 12º - 17º 1800 1900-2000 95 260 M16 210 Nm 14º - 18º 2000 2100-2200 95 260 M16 210 Nm 15º - 20º
Rulli Rulmeca S.p.A - 24011 Almè (BG) e.mail: [email protected]
Rulmeca Scraper
PU 92 secondary scraper is placed below the drive pulley. The pressure of the PU strip against the belt is produced by two predimensions of the scraper can be continuously adjusted. The scraper cannot be used on belts with reversible operations. Can be fitted with tungsten-carbide blades.
B-W 400-2000
B-W SCRAP400 500 650 800
1000 1200 1400 1600 1800 2000
24011 Almè (BG) - Italia - Via A. Toscanini,1Tel: 035 4300111 Fax: 035 545523 [email protected] Web: www.rulmeca.com
Rulmeca Scraper PU 92
PU 92 secondary scraper is placed below the drive pulley. The pressure of the PU strip against the belt is produced by two pre tensioned torsion springs. The installation dimensions of the scraper can be continuously adjusted. The scraper cannot be used
carbide blades.
SCRAPING WIDTH L- LENGTH 400 482-582 500 582-682 600 682-782 700 840-940 900 1040-1140
1100 1240-1340 1300 1440-1540 1500 1700-1800 1700 1900-2000 1900 2100-2200
Tel: 035 4300111 Fax: 035 545523
PU 92 secondary scraper is placed below the drive pulley. The pressure of the PU strip springs. The installation
dimensions of the scraper can be continuously adjusted. The scraper cannot be used
Moving ahead.4
RULMECA SCRAPER PU 88
The PU 88 is a stable plough with steel frame and exchangeable PU-scraper strips.When fitting the plough, a tube of diameter 40 mm is threaded through the PU link.The tube is then fixed to the frame of the conveyor.The plough can be modified for reversible drive.
B-W 400-1800mm.
B-W
40050065080010001200140016001800
L
3804305105706807808809801080
7
Moving ahead. 7
Rulli Rulmeca S.p.A - 24011 Almè (BG) e.mail: [email protected]
Rulmeca Scraper
PU 92 secondary scraper is placed below the drive pulley. The pressure of the PU strip against the belt is produced by two predimensions of the scraper can be continuously adjusted. The scraper cannot be used on belts with reversible operations. Can be fitted with tungsten-carbide blades.
B-W 400-2000
B-W SCRAP400 500 650 800
1000 1200 1400 1600 1800 2000
24011 Almè (BG) - Italia - Via A. Toscanini,1Tel: 035 4300111 Fax: 035 545523 [email protected] Web: www.rulmeca.com
Rulmeca Scraper PU 92
PU 92 secondary scraper is placed below the drive pulley. The pressure of the PU strip against the belt is produced by two pre tensioned torsion springs. The installation dimensions of the scraper can be continuously adjusted. The scraper cannot be used carbide blades.
SCRAPING WIDTH L- LENGTH 400 482-582 500 582-682 600 682-782 700 840-940 900 1040-1140
1100 1240-1340 1300 1440-1540 1500 1700-1800 1700 1900-2000 1900 2100-2200
Tel: 035 4300111 Fax: 035 545523
PU 92 secondary scraper is placed below the drive pulley. The pressure of the PU strip springs. The installation dimensions of the scraper can be continuously adjusted. The scraper cannot be used
RULMECA SCRAPER PU 92
PU 92 secondary scraper is placed below the drive pulley. The pressure of the PU strip against the belt is produced by two pre tensioned torsion springs. The installation dimensions of the scraper can be continuously adjusted. The scraper cannot be usedon belts with reversible operations.
Can be fitted with tungsten-carbide blades.
B-W 400-2000.
B-W
400500650800100012001400160018002000
SCRAPING WIDTH
40050060070090011001300150017001900
BEAM LENGTH
482-582582-682682-782840-940
1040-11401240-13401440-15401700-18001900-20002100-2200
Rulli Rulmeca S.p.A - 24011 Almè (BG) e.mail: [email protected]
Rulmeca Scraper
PU 92 secondary scraper is placed below the drive pulley. The pressure of the PU strip against the belt is produced by two predimensions of the scraper can be continuously adjusted. The scraper cannot be used on belts with reversible operations. Can be fitted with tungsten-carbide blades.
B-W 400-2000
B-W SCRAP400 500 650 800
1000 1200 1400 1600 1800 2000
24011 Almè (BG) - Italia - Via A. Toscanini,1Tel: 035 4300111 Fax: 035 545523 [email protected] Web: www.rulmeca.com
Rulmeca Scraper PU 92
PU 92 secondary scraper is placed below the drive pulley. The pressure of the PU strip against the belt is produced by two pre tensioned torsion springs. The installation dimensions of the scraper can be continuously adjusted. The scraper cannot be used
carbide blades.
SCRAPING WIDTH L- LENGTH 400 482-582 500 582-682 600 682-782 700 840-940 900 1040-1140
1100 1240-1340 1300 1440-1540 1500 1700-1800 1700 1900-2000 1900 2100-2200
Tel: 035 4300111 Fax: 035 545523
PU 92 secondary scraper is placed below the drive pulley. The pressure of the PU strip springs. The installation
dimensions of the scraper can be continuously adjusted. The scraper cannot be used
Rulli Rulmeca S.p.A - 24011 Almè (BG) - Italia - Via A. Toscanini,1 Tel: 035 4300111 Fax: 035 545523 e.mail: [email protected] Web: www.rulmeca.com
MAINTENANCE Inspect and clean the scraper regularly– we suggest once a week. When half the strip height remains, change it (2). Change the segments by undoing the M8 nuts and flat iron bar. Bolt on the new strip. Set the scraper. Set the torsion element using a pipe wrench and lock the bolt. Readjust the scraper pressure so as to achieve optimal cleaning. There must be no vibrations or noise. However, vibrations may arise when the belt is run without material or when the belt has a coating of resin. In the long term, vibrations may result in cracking of the beam. These must therefore be eliminated. Try therefore: …… changing the angle of the blade against the belt a few degrees …… changing the pressure of the blade against the belt. …… making a more robust attachment to the frame. …… increasing the mass of the beam (1) by, for example, fitting a small lever arm to the beam (1). WARRANTY Damage to the scraper caused by incorrect handling or in connection with incorrect installation cannot be considered to be covered by warranty if these instructions have not been followed. We therefore accept no claims for any consequential damage or loss.
B-W L at standard øD A Fixing bolt Tightening F beam length torque
400 482-582 58 166 M10 49 Nm 9º - 14º 500 582-682 58 166 M10 49 Nm 11º - 16º 650 682-782 58 166 M10 49 Nm 12º - 18º 800 840-940 78 208 M12 86 Nm 10º - 15º 1000 1040-1140 78 208 M12 86 Nm 13º - 18º 1200 1240-1340 78 208 M12 86 Nm 15º - 21º 1400 1440-1540 78 208 M12 86 Nm 17º - 23º 1600 1700-1800 95 260 M16 210 Nm 12º - 17º 1800 1900-2000 95 260 M16 210 Nm 14º - 18º 2000 2100-2200 95 260 M16 210 Nm 15º - 20º
Rulli Rulmeca S.p.A - 24011 Almè (BG) e.mail: [email protected]
Rulmeca Scraper
PU 92 secondary scraper is placed below the drive pulley. The pressure of the PU strip against the belt is produced by two predimensions of the scraper can be continuously adjusted. The scraper cannot be used on belts with reversible operations. Can be fitted with tungsten-carbide blades.
B-W 400-2000
B-W SCRAP400 500 650 800
1000 1200 1400 1600 1800 2000
24011 Almè (BG) - Italia - Via A. Toscanini,1Tel: 035 4300111 Fax: 035 545523 [email protected] Web: www.rulmeca.com
Rulmeca Scraper PU 92
PU 92 secondary scraper is placed below the drive pulley. The pressure of the PU strip against the belt is produced by two pre tensioned torsion springs. The installation dimensions of the scraper can be continuously adjusted. The scraper cannot be used
carbide blades.
SCRAPING WIDTH L- LENGTH 400 482-582 500 582-682 600 682-782 700 840-940 900 1040-1140
1100 1240-1340 1300 1440-1540 1500 1700-1800 1700 1900-2000 1900 2100-2200
Tel: 035 4300111 Fax: 035 545523
PU 92 secondary scraper is placed below the drive pulley. The pressure of the PU strip springs. The installation
dimensions of the scraper can be continuously adjusted. The scraper cannot be used
RULMECA A/SLANGEBJERGVÆNGET 8B
DK - 4000 ROSKILDEPHONE: +45 3677 6755
RULMECA.COM
Moving ahead.
RULMECA IS THE FIRST COMPANY IN DENMARK WHICH CAN OFFER OWN BRAND PRODUCTION OF TRANSPORT COMPONENTS FOR MOST INDUSTRIES, STRAIGHT FROM THE FOOD INDUSTRY TO AIRPORTS, GRAVEL PITS, CEMENT FACTORIES AND POWER PLANTS.
Bakmøllevej 61, NørhalneDK-9430 Vadum
Telefon: +45 9826 8799Fax: +45 9826 8735
HOVEDKONTORIndustriparken 20DK-7182 Bredsten
Tlf.: +45 7588 1511Fax: +45 7588 1372
AFD. AABENRAALundsbjerg
Industrivej 45DK-6200 AabenraaTlf.: +45 7463 1858
www.jtt.dk