JTC AUTO TOOLS USA BODY SERIES...• Original wedge. • 9 /23 / 24 0.65' JTC-C703 THIN HEAVY–DUTY...

JTC AUTO TOOLS USA BODY SERIES

JTC AUTO TOOLS USA 678 – 876 – 3470 2600 NORTHLAKE DR., SUITE F, SUWANEE, GA, 30024

JTC-2522 WIRE WINDSHIELD REMOVAL KIT

• Feed the wire through the hole in the

wedge shaft, loop it through the hole at

the top of the shaft, and then back into the

handle.

• Pressing the wedge back into the handle

and the wire will be held.

• Wire material: Stainless

• Wire Length: 72” O.D.: 0.75mm

• Wire type: ▲

JTC-2523 WIRE FEEDER TOOL

• Special designed for easy and flexible insertion of

wire through polyurethane, allowing speedily

removal of bonded windshield.

JTC-2524 24" WINDSHIELD WEATHER STRIP CUTTING

KNIFE

• Made of aluminum with a steel-

retaining block for the blade.

• Allows the user to reach the corners of

the windshield easily.

• Unique design that allows you to store

an extra blade in the handle.

• Total length: 24" (610mm).



JTC-2525 WINDSHIELD REMOVAL KIT

• Contents:

2520 – Glasses rubber knife

2522A – Wire

2522B – Wire feeder tool

2525A – Trim pad remover

2525B – Windshield molding release tool

JTC-2530 COLLISION HAMMER

• Surface of hammer: 41mmφ

• L x W: 295mm x 114mm

• Special designed hammer surface will turn when

you hit the plate to eliminate the convex plate.

• 12 pcs / 36 pcs / 16 / 17 / 2.1'

JTC-2531 LARGE HEAD HAMMERS (—)

• Spec: Sidelong (—)

• Size of hammer head: 29φ

• Length: 346 x 120mm



JTC-2532 LARGE HEAD HAMMERS (｜)

• Spec: Vertical (｜)



JTC-2533 EXTRA LARGE HAMMERS (—)

• Spec: Sidelong (—)



JTC-2534 EXTRA LARGE HAMMERS (｜)

• Spec: Vertical (｜)





JTC-2535 BODY PRY BARS (BENT)

• Model: F1NG

• Length: 560mm

JTC-2536 BODY PRY BARS (USA TYPE)

• Model: F1VG

• Length: 580mm

JTC-2542 BODY WEDGE TOOLS L

• Model: 21LV

• Width: 125mm

• Length: 255mm



JTC-2543 BODY WEDGE TOOLS T

• Model: 21TV

• Width: 137mm

• Length: 255mm

JTC-2546 BODY WEDGE TOOLS (SMALL STRAIGHT)

• Model: 21V5

• Width: 48mm

• Length: 110mm

JTC-2549 BUMPING TOOLS (SINGLE THIN)

• Model: 2121

• Spec: Single thin

• W x D x H: 80 x 56 x 26mm



JTC-2551 BUMPING TOOLS (TWIN SURFACE)

• Model: 21GA

• Spec: Twin surface

• W x D x H: 92 x 58 x 28mm

JTC-2553 BUMPING TOOLS (COMMA)

• Model: 2122

• Spec: Comma

• W x D x H: 130 x 60 x 43mm

JTC-2554 7 PCS RUBBER DOLLY

• Contents:

1. Heel dolly.

2. Long type heel dolly.

3. Double end dolly.

4. Curved dolly.

5. Utility dolly. (general purpose dolly)

6. Double end hand dolly.

7. Long type curved dolly.

3 / 20.5 / 21.5 / 1.7'



JTC-3526 ADJUSTABLE BODY BLADE HOLDER

• Could be adjusted radian by demand.

• Use with 14" body blade

(JTC-3527 or JTC-3528)

JTC-3527 BODY BLADE 12TPI

• Use with JTC-3526

• Length: 14"

• TPI: 12 TPI

JTC-3528 BODY BLADE 9TPI

• Use with JTC-3526

• Length: 14"

• TPI: 9 TPI



JTC-5300B BREAK PLASTIC CONNECTOR

(ECONOMIC TYPE)

• Economic type.

• Use on any kind of plastic such as bumper,

upholstery, fender, etc.

• Power: AC110V / 220V, 50 / 60HZ

• Size: W110 x D160 x H110mm

• Contents:

0.6mm nail x 100 pcs

0.8mm nail x 100 pcs

90˚ nail x 100 pcs

JTC-C101 SMALL MOUTH PULL CLAMP

• Capacity: 5 ton

• Bolt size: 16mm φ x 70mm

• Single-way pull operation.

• 15 pc / 28 / 29 / 0.97'

JTC-C101N SMALL MOUTH PULL CLAMP (TWO–WAY)

• Capacity:

5 ton (Straight way)

2 ton (Cross way)


• Two-way pull operation.

• 12 pcs / 26 / 27 / 1'



JTC-C102 BIG MOUTH CLAMP

• Capacity: 3 ton



• 12 pcs / 26 / 27 / 1'

JTC-C102NN BOX CLAMP (TWO–WAY)

• Capacity:


2 ton (Cross way)


• Both sides of jaws are different to fit the confined

room.


• 12 pcs / 27 / 28 / 1'

JTC-C203 HEAVY DUTY CLAMP

• Capacity: 5 ton


• Distinctive design for operator when

they need to powerful pull.


• 9 pcs / 28 / 29 / 0.65'



JTC-C301 LONG NOSE CLAMP

• Capacity: 2 ton



• The flat design is specialized for the

confined room.

• 15 pcs / 25 / 26 / 0.97'

JTC-C302 MINI CLAMP (TWO–WAY)

• Capacity:

3 ton (Straight)

2 ton (Cross way)



• Special mini design is good to use in a narrow and

small space.

• 20 pcs / 20 / 21 / 0.58'

JTC-C303 90° PULL CLAMP

• Capacity: 3 ton

• Max. open: 35mm

• The width of tooth: 40mm

• Distinctive design to pull from the

position in 90° for easy using.

• 10/ 12kgs/ 13 kgs / 0.59'



JTC-C304 90° CORNER PULL CLAMP

• Capacity: 3 tons

• Capable to reach into narrow and confined

areas.

• With its teeth surface, this clamp can

provide a solid grip for straight pulls at

right angle corners.

JTC-C402 SCISSOR CLAMP

• Capacity: 3 ton


• Clipper design to make operators do not need

fixed by screws.

• The tool's feature is when operator pull longer

and will tight more.

• 10 pcs / 26 / 27 / 0.92'

JTC-C601 FRAME RACK CLAMP

• Capacity:5 ton


• Serrate length:120mm

• The special puller design used with plate

makes it hard to be broken.

• Bolt size:14mm φ x 73mm

• 9pcs / 21 / 22 / 0.65'



JTC-C601N FRAME RACK CLAMP (TWO–WAY)

• Capacity:


3 ton (Cross way)

• The special puller design used with plate

with makes it hard to be broken.


• 9 pcs / 24 / 25 / 0.65'

JTC-C602 FRAME RACK CLAMP (MULT –WAY)

• Capacity:


3 ton (Cross way)

3 ton (Multi-way)

• The special puller design used with steel makes it

hard to be broken.


• 9pcs / 29 / 30 / 0.65'

JTC-C603 FRAME RACK CLAMP BAR

• Capacity: 5 ton


• Use the two hooks to pull and fix the

car.

• This tool could be clipped to unibody

or any other place of the body.

• The puller and hooks are adjustable; it

could be change the range for fitting

the place.

• 4 pcs / 24 / 25 / 0.78'



JTC-C701 THIN EDGE MOUTH CLAMP

• Capacity: 3 ton

• Self-tightening.

• The edge mouth for getting into hard-to-reach

places.

• Drop-forged round wedge to keep twist out of

chain, aggressive cross-hatch tooth design,

spring-loaded for easy opening.

• 15pcs / 14 / 15 / 0.82'

JTC-C702 ROUND MOUTH CLAMP

• Capacity: 5 ton


• Small, light, versatile.

• Has a minimum of 1-1/2" throat clearance to

reach around flanges, cowls, pinch welds and lips.

• Pushes against panels where only narrow bite is

available.

• Original wedge.

• 9 /23 / 24 0.65'

JTC-C703 THIN HEAVY–DUTY CLAMP

• Capacity: 6 ton


• It grabs 2 1/4" of metal, making it ideal

for hard pulls on heavy metal of

frame.

• Original straight cut tooth design.

• 9 / 29 / 30 / 0.65'



JTC-C801 MULTI–POSITION PULL CLAMP

• Capacity: 5 ton

• Bolt size: 16 m/m x 93 m/m L

• Serrate length: 95 m/m

• Distinctive design to pull from multi-

position in 90°

JTC-C802 SMALL MOUTH PULL CLAMP – EUROPE TYPE

• Capacity: 5 ton

• Bolt size: 16 m/m x 70 m/m L

• Serrate length: 45 m/m

JTC-C901 DOUBLE CLAW HOOK

• Capacity: 6 ton

• For use as chain shorten or chain

connector.

• Use with 5/16", 3/8" chains.

• 15 pcs / 24 / 25 / 0.97'



JTC-C902 DOUBLE CONNECTOR

• Capacity: 6 ton

• Use with 5/16" or 3/8" chains.

• This tool enables you to use two clamps

side by side for more pull.

• 20 pcs / 23.5 / 24 / 0.36'

JTC-C903 HANDY LINK

• Capacity: 6 ton

• For use as chain shorten, chain connector or

double hooks.

• Use with 5/16", 3/8" chains.

• 20 pcs / 15.5 / 16 / 0.26'

JTC-C905 UNIBODY CLAMP

• Capacity: 5 ton.


• When the damage is in the middle of

car plate and it is not easy to fix by

those clamps.

• This model of tool is using to fix this

kind of problems.

• 12 pcs / 24 / 25 / 05'



JTC-C906 SMALL BODY HOOK

• Capacity: 3 tons.

• Overall length: 12" (300mm)

• Front tip can reach into deep position to hook

up the body parts.

JTC-YC900 LARGE SLIDING HAMMER SET

• Include every kind of hooks and pullers to fit.

• Hooks made by plate for easy work when

operator use it in confined space.

JTC AUTO TOOLS USA BODY SERIES...• Original wedge. • 9 /23 / 24 0.65' JTC-C703 THIN HEAVY–DUTY...

Documents

Transcript of JTC AUTO TOOLS USA BODY SERIES...• Original wedge. • 9 /23 / 24 0.65' JTC-C703 THIN HEAVY–DUTY...