JPMA WIC 9 - POS Functions

9
Manager Functions at the Point of Sale The PoS has several “functions” available while in operation. There are media reports, toggling Training Mode, Restarting the Peripherals, & Shutting Down the PoS Application.

Transcript of JPMA WIC 9 - POS Functions

Page 1: JPMA WIC 9 -  POS Functions

Manager Functions at the Point of Sale

The PoS has several “functions” available while in operation. There are media reports, toggling Training Mode, Restarting the Peripherals, &

Shutting Down the PoS Application.

Page 2: JPMA WIC 9 -  POS Functions

To display available functions press the Function Key

Page 3: JPMA WIC 9 -  POS Functions

A “Pop-Up” window displays a list of available functions … highlight a function and press the Select Button. In this example the terminal will run a Cashier X report

1. AVAILABLE COMMANDS – Prints a list of commend number at the PoS2. Cashier X Report – Prints details about the sale that a Cashier has done3. Media Flash Report – A small report showing media accepted at the register4. TOGGLE TRAINING MODE – Puts the PoS in to or out of Training Mode5. RESTART PERIPHERALS – Reinitializes hardware attached to the PoS6. SHUTDOWN POS - Stops the PoS application to access the desktop7. EXIT POS & POWER OFF – Stops the PoS application and turns off the computer

Page 4: JPMA WIC 9 -  POS Functions

Enter the Cashier Number desired and

press the Enter Key. A report will print at the

PoS.

Page 5: JPMA WIC 9 -  POS Functions

The Print Report Button will print a small report that will show the

totals of the media taken at the till

Page 6: JPMA WIC 9 -  POS Functions

Terminal Z Report

Positive: This defines How many transaction were done netting the totals in a positive manner (should be the ONLY total on the WIC system)Negative: This defines How many transaction were done netting the totals in a negative manner (no way to Return or Refund WIC so total will always be zero)Adding B: This defines if a media has been affected by a “Loan” to the drawer (this will always be zero as no value will ever be Loaned for WIC)Reducing: This defines if a media has been affected by a “Pick Up” to the drawer (this will always be zero as no value will ever be Picked Up for WIC)

Grand Totals – Totals from day one and will be reset through the End of the Year Process

System will ONLY have one media total – WIC EBT

Corrections, Voids, Cancelled sales will be accounted for under

the Informational Totals

Positive Items are item sold – Negative Items are items returned (can’t return in this system)

Positive Corrections are corrections made during a sale Negative Corrections are correction made

during a return (can’t return in this system)

Media Adjustment will not be used in this system, since there is no “real” media changing hands

(see below)

Page 7: JPMA WIC 9 -  POS Functions

To Shutdown the PoS application, enter 999 and

Press the Function Key

Page 8: JPMA WIC 9 -  POS Functions

The cashier is prompted to Confirm with ENTER or Cancel with Clear

Press Enter to shutdown to the

desktop

Press Clear to go back to Terminal Open and

Cancel the Shutdown

Page 9: JPMA WIC 9 -  POS Functions

If Enter is selected, the system will Shutdown to the Desktop