Jon Podgorni, Lab Manager 3/25/2019...Jon Podgorni, Lab Manager 3/25/2019 ID Weight % Conc. Analyst:...

5

Transcript of Jon Podgorni, Lab Manager 3/25/2019...Jon Podgorni, Lab Manager 3/25/2019 ID Weight % Conc. Analyst:...

Page 1: Jon Podgorni, Lab Manager 3/25/2019...Jon Podgorni, Lab Manager 3/25/2019 ID Weight % Conc. Analyst: LG Test Date: 3/22/2019 The client sample was analyzed for plant-based cannabinoids
Page 2: Jon Podgorni, Lab Manager 3/25/2019...Jon Podgorni, Lab Manager 3/25/2019 ID Weight % Conc. Analyst: LG Test Date: 3/22/2019 The client sample was analyzed for plant-based cannabinoids

Certificate ID: 50417Client Sample ID: LE_190138_030619_1/2

Matrix: Tincture - Hemp Oil

Received: 3/11/19

Lot Number: LE190138_1/2

Scan QR Code for authenticity

Authorization: Signature: Date:

3/25/2019Jon Podgorni, Lab Manager

ID Weight % Conc.

Analyst: LG Test Date: 3/22/2019The client sample was analyzed for plant-based cannabinoids by Liquid Chromatography (LC). The collected data was compared to data collected for certified reference standards at known concentrations.

50417-CN

CN: Cannabinoid Profile & Potency [WI-10-17 & WI-10-17-01]

D9-THC 0.13 wt % 1.22 mg/mLTHCV ND NDCBD 3.09 wt % 28.10 mg/mL

CBDV ND NDCBG ND NDCBC 0.10 wt % 0.91 mg/mLCBN 0.00 wt % 0.03 mg/mL

THCA ND NDCBDA 0.01 wt % 0.09 mg/mLCBGA ND ND

D8-THC ND NDexo-THC ND ND

3.33 wt% 30.37 mg/mLTotal0.13 wt% 1.22 mg/mLMax THC3.09 wt% 28.19 mg/mLMax CBD

Ratio of Total CBD to THC 23.0:1

0% 3.1%Cannabinoids (wt%)

Max THC (and Max CBD) are calculated values for total cannabinoids after heating, assuming complete decarboxylation of the acid to the neutral form. It is calculated based on the weight loss of the acid group during decarboxylation: Max THC = (0.877 x THCA) + THC. This calculation does not include other cannabinoid isomers (eg. D8-THC and exo-THC). ND = None detected above the limits of detection (LLD)

FM-10-10, Rev. 1, DCN:15-0003 Page 1 of 2420 Fortune Blvd • Milford, MA 01757 • 617-221-3356

www.ProVerdeLabs.com

Page 3: Jon Podgorni, Lab Manager 3/25/2019...Jon Podgorni, Lab Manager 3/25/2019 ID Weight % Conc. Analyst: LG Test Date: 3/22/2019 The client sample was analyzed for plant-based cannabinoids

Analyst: MM Test Date: 3/11/2019This test method was performed in accordance with the requirements of ISO/IEC 17025. These results relate only to the test article listed in this report. Reports may not be reproduced except in their entirety.

Symbol Analysis Results Units Limits*50417-MB1

Status

MB1: Microbiological Contaminants [WI-10-09]

AC Total Aerobic Bacterial Count <100 CFU/g 100,000 CFU/g PASSCC Total Coliform Bacterial Count <100 CFU/g 1,000 CFU/g PASSEB Total Bile Tolerant Gram Negative Count <100 CFU/g 1,000 CFU/g PASSYM Total Yeast & Mold <100 CFU/g 10,000 CFU/g PASS

Note: All recorded Microbiological tests are within the established limits.

END OF REPORT

FM-10-10, Rev. 1, DCN:15-0003 Page 2 of 2420 Fortune Blvd • Milford, MA 01757 • 617-221-3356

www.ProVerdeLabs.com

Page 4: Jon Podgorni, Lab Manager 3/25/2019...Jon Podgorni, Lab Manager 3/25/2019 ID Weight % Conc. Analyst: LG Test Date: 3/22/2019 The client sample was analyzed for plant-based cannabinoids

Certificate ID: 50415Client Sample ID: LE_190137_030619_1/2

Matrix: -

Received: 3/11/19

Lot Number: LE190137_1/2

Scan QR Code for authenticity

Authorization: Signature: Date:

3/25/2019Jon Podgorni, Lab Manager

ID Weight % Conc.

Analyst: LG Test Date: 3/22/2019The client sample was analyzed for plant-based cannabinoids by Liquid Chromatography (LC). The collected data was compared to data collected for certified reference standards at known concentrations.

50415-CN

CN: Cannabinoid Profile & Potency [WI-10-17 & WI-10-17-01]

D9-THC 0.11 wt % 1.01 mg/mLTHCV ND NDCBD 2.94 wt % 26.90 mg/mL

CBDV ND NDCBG 0.01 wt % 0.09 mg/mLCBC 0.10 wt % 0.92 mg/mLCBN 0.00 wt % 0.04 mg/mL

THCA ND NDCBDA 0.01 wt % 0.09 mg/mLCBGA ND ND

D8-THC ND NDexo-THC ND ND

3.18 wt% 29.05 mg/mLTotal0.11 wt% 1.01 mg/mLMax THC2.95 wt% 26.98 mg/mLMax CBD

Ratio of Total CBD to THC 26.8:1

0% 2.9%Cannabinoids (wt%)

Max THC (and Max CBD) are calculated values for total cannabinoids after heating, assuming complete decarboxylation of the acid to the neutral form. It is calculated based on the weight loss of the acid group during decarboxylation: Max THC = (0.877 x THCA) + THC. This calculation does not include other cannabinoid isomers (eg. D8-THC and exo-THC). ND = None detected above the limits of detection (LLD)

FM-10-10, Rev. 1, DCN:15-0003 Page 1 of 2420 Fortune Blvd • Milford, MA 01757 • 617-221-3356

www.ProVerdeLabs.com

Page 5: Jon Podgorni, Lab Manager 3/25/2019...Jon Podgorni, Lab Manager 3/25/2019 ID Weight % Conc. Analyst: LG Test Date: 3/22/2019 The client sample was analyzed for plant-based cannabinoids

Analyst: MM Test Date: 3/11/2019This test method was performed in accordance with the requirements of ISO/IEC 17025. These results relate only to the test article listed in this report. Reports may not be reproduced except in their entirety.

Symbol Analysis Results Units Limits*50415-MB1

Status

MB1: Microbiological Contaminants [WI-10-09]

AC Total Aerobic Bacterial Count <100 CFU/g 100,000 CFU/g PASSCC Total Coliform Bacterial Count <100 CFU/g 1,000 CFU/g PASSEB Total Bile Tolerant Gram Negative Count <100 CFU/g 1,000 CFU/g PASSYM Total Yeast & Mold <100 CFU/g 10,000 CFU/g PASS

Note: All recorded Microbiological tests are within the established limits.

END OF REPORT

FM-10-10, Rev. 1, DCN:15-0003 Page 2 of 2420 Fortune Blvd • Milford, MA 01757 • 617-221-3356

www.ProVerdeLabs.com