John Diaz Schematic Dave Curtis Schematic Rev3 Mystery parts 1 These L3,L4 (L3,L8 in original) are...
15
John Diaz’ Schematic Dave Curtis’ Schematic Rev3 Mystery parts 1 These L3,L4 (L3,L8 in original) are hand wound coils that need to be specially made here at SSL.
description
Other questions! Caps not found in 1206 package, what is comparable? Ans: Tantalum Caps will never be found in that package, find another. Resistors listed as RWR81 (R41,19,21,44,49) – how do we translate that into a package size? Answer: RWR81 is a milspec package, look for commercial part possibly in 2815 package. 2 caps V V, can’t find those anywhere in Digikey or other cat. Answer: V is a misprint in the new schematic, should be 0.01 microF. The other one does not have to be 10V it can be 100 and that can probably be found.
Transcript of John Diaz Schematic Dave Curtis Schematic Rev3 Mystery parts 1 These L3,L4 (L3,L8 in original) are...
John Diaz’ Schematic Dave Curtis’ Schematic Rev3Mystery parts 1
These L3,L4 (L3,L8 in original) are hand wound coils that need to be specially made here at SSL.
Mystery part 2
Where do we order this oscillator? The answer is “Dorothy Knows”
Other questions!• Caps 10-32 not found in 1206 package, what is comparable?
Ans: Tantalum Caps will never be found in that package, find another.
• Resistors listed as RWR81 (R41,19,21,44,49) – how do we translate that into a package size? Answer: RWR81 is a milspec package, look for commercial part possibly in 2815 package.
• 2 caps 0.01 pF @ 50V. 10 pF @ 10V, can’t find those anywhere in Digikey or other cat. Answer: 0.01 pF @ 50V is a misprint in the new schematic, should be 0.01 microF. The other one does not have to be 10V it can be 100 and that can probably be found.
ProblemCurtis Diaz
Diaz Schematic is missing “Antenna_Deploy_Control” input
Problem
Curtis Diaz
Resistor values do not match
ProblemDiaz
Wire is not connected
ProblemCurtis
Diaz
Multiple Discrepancies
ProblemCurtis
Diaz
Voltages do not match on 47uF resistors
ProblemCurtis Diaz
Capacitors do not match
ProblemCurtis Diaz
Capacitor Values do not match
ProblemCurtis Diaz
Percentage on resistor absent in Diaz Schematic
ProblemCurtis Diaz
Percentage on resistor absent in Diaz Schematic, also not connected to 64 pin?
ProblemCurtis Diaz
Resistors do not match
Problem
Where is the Input voltage on pin 4 of U25 in the Diptrace schematic?
Need 8v HERE!!
Question
Why is the pull up resistor connected to On/Off toggle instead of Vin or missing on some of the FPF2106 load switches in both schematics?
