JOHN DEERE HAY EQUIPMENT 4 foot Round Baler Accumulator

Four Foot Round Baler Accumulator

CodeAttachmentIdentifier Description

List PriceSuggested

USD ($)

Select One Code From Each Required Category

BASE MACHINEEX-Works Monterrey, Mexico.

0820P 4 foot Round Baler Accumulator 13,963.00

DESTINATION

North America0202 United States In Base Price

0184 Canada Same Price

OPERATOR'S MANUAL AND DECALS0409 English (U.S. / Canada ONLY)

English operator manual and text free decals.In Base Price

0413 French (Canada ONLY)French operator manual and text free decals.

Same Price

0443 English/Spanish (U.S. Only)English and Spanish operator manual and text free decals.

Same Price

0448 English No TextEnglish operator manual and text free decals

Same Price

BALER CONFIGURATION4100 Precutter

This accumulator is for the 6 foot diameter, 0 Series MegaWideHC2 machines only. 854, 960and 990 will not accommodate this accumulator.

900.00

4000 Dry Hay or SilageThis accumulator will accommodate the 7, 8, 9 and 0 Series, 6 foot diameter round balers thathave a MegaWide pickup and jumbo tires. 854, 960 and 990 balers will not accommodate thisaccumulator.

In Base Price

ALLIED SUPPLIER INFORMATIONCamera observation system is not necessary for the A520R and A420R but it is availablethrough your local John Deere Dealer. ToughCam Medium-duty dual-camera observationsystem (SWVOS7MDCL2B). 7" LCD observation screen. 2 high performance super CMOScameras. 4" LCD camera mount. Will accept up to 3 cameras. 2 - 25 foot cables and 1 - 75foot cable.

AGRICULTURAL PRODUCTSJOHN DEERE HAY EQUIPMENT

4 foot Round Baler AccumulatorEquipment for Base Machine

01 November 2017 US & Canada5-HAY & FORAGE- 1


4 foot Round Baler AccumulatorContinued


Five Foot Round Baler Accumulator


List PriceSuggested

USD ($)


BASE MACHINEEX-Works Monterrey, Mexico.

0830P 5 foot round baler accumulator 14,715.00

DESTINATION






Same Price

0443 English/Spanish (U.S. Only)English and Spanish operator manual and text free decals.

Same Price

0448 English No TextEnglish operator manual and text free decals

Same Price

BALER CONFIGURATION4100 Precutter

This accumulator is for the 6 foot diameter, 0 Series MegaWideHC2 machines only. 854, 960and 990 will not accommodate this accumulator.

900.00

4000 Dry Hay or SilageThis accumulator will accommodate the 7, 8, 9 and 0 Series, 6 foot diameter round balers thathave a MegaWide pickup and jumbo tires. 854, 960 and 990 balers will not accommodate thisaccumulator.

In Base Price

ALLIED SUPPLIER INFORMATIONCamera observation system is not necessary for the A520R and A420R but it is availablethrough your local John Deere Dealer. ToughCam Medium-duty dual-camera observationsystem (SWVOS7MDCL2B). 7" LCD observation screen. 2 high performance super CMOScameras. 4" LCD camera mount. Will accept up to 3 cameras. 2 - 25 foot cables and 1 - 75foot cable.


5 foot round baler accumulatorEquipment for Base Machine



5 foot round baler accumulatorContinued


61.6 In. (1565mm) Wide Up to 72 In. (1829mm)Diameter Bale Weighing up to 2200 lb. (998kg) Eight7 In. (178mm) Wide, DiamondTough Triple Weave BeltsDiamond Tread Friction Surface Belts Mato,Plate-Type Belt Splices Regular Pickup: 61.4 In.(1.6 M), Inside 71 In. (1.8 M), Flare to FlareRoller Chain with V-Belt Drive Four-Bar PickupReel, 96 Teeth Adjustable Contoured Hay CompressorsAdjustable Height Control Side Flare Crop GuidesConstant Velocity 540 RPM PTO Tractor Hookup -Free-Rotation, Lockback Collar, Slip ClutchProtected Adjustable Hydraulic Density Control withPressure Gauge Large Feed Opening Powered RoundbarStarter Roll Staggered Belt Roll Bearing ProtectorsElectric Twine Wrap-Double Arm Adjustable,Self-Activated Visual Twine Movement IndicatorAdjustable Twine Guides Eight Ball Twine Storage14L x 16.1, 8PR Hi-Flotation Tires Adjustable WheelSpindles Screw-type Jack Mechanical Bale DiameterIndicator Hinged Shields Hydraulic Gate LockoutFlashing Warning Lights with Turning Signal 10,000lbs. (45 kN) Safety Chain Bale-Trak ProMonitor/Controller: (Less Mounting Brackets)

Monitor Functions: Gate Latched-Ready Bale ShapeIndicators Near Full Size Alert Full Bale AlarmBale Full-Size Wrap Started Oversize Bale AlertGate Partially Open-Stop Display Bale Size Out ofNet Net Cutoff Selection of Twine or Net On BoardDiagnostics Bale Counter Low Voltage IndicatorDisplay Error Codes Bale Size Calibration ManualActuator Movement with Electronic Bypass ControllerFunctions: Net or Twine Application Auto Wrap CycleControl of Bale Size Control of Twine Spacing/NetWraps Number of End Wraps End Wrap Location Controlof Soft Core (Connects to Tractor 3-TerminalConvenience Outlet) For tractors not equipped witha Convenience Outlet, order AE50549, 3-TerminalConvenience Outlet Wiring Harness from Parts.Balers equipped with Hydraulic Pickup Lift requiretractor with two SCV's


List PriceSuggested

USD ($)


BASE MACHINE2370E 560M Round Baler 43,194.00

DESTINATION



OPERATOR'S MANUAL AND DECALS0409 English In Base Price

0443 English/Spanish (U.S. ONLY)English and Spanish operator manual and bilingual decals.

Same Price


Same Price

0437 SpanishSpanish operator manual and text free decals.

Same Price

0448 English No TextEnglish operator manual and text free decals.

Same Price

0430 PortuguesePortuguese operator manual and text free decals.

Same Price


560M Round BalerEquipment for Base Machine



List PriceSuggested

USD ($)

OPERATOR'S MANUAL AND DECALS ...Continued...0433 Russian

Russian operator manual and text free decals.Same Price

0445 KazakhstanRussian operator manual and text free decals.

Same Price

BALER CONFIGURATION0501 Dry Hay Baler Configuration

560M Dry Hay Baler ConfigurationCOMMON, ADJUSTABLE CLEVIS2.2M MegaWide Plus PickupSLIP CLUTCH ALERTBaleTrac Pro DisplayMegaWide Plus RotorMegaWide Plus Baffle and Compression RackTWINE

In Base Price

0502 SILAGE Baler Configuration560M Silage Baler ConfigurationSILAGE IDENTIFIER DECALSMAIN FRAME, 5X6 BALERAUGER, 560 SILAGE PARTSTONGUE, COMMON, ADJUSTABLE CLEVISBale Trac Pro Display

2,195.00

0503 Precutter Baler Configuration560M Precutter Baler Configuration20 KNIFE 5X6 SILAGE PRECUTTER2.2 METER PICKUPHYDRAULIC DROP FLOORPRECUTTER TONGUE ROUND BALER1000 RPM PRECUTTER GEARBOXSLIP CLUTCH ALERTMONITOR, BALETRAK PROPRECUTTER IDENTIFIER DECALSMEGAWIDE PLUS GAUGE WHEEL3RD ROLL DRIVE 5X621.5L-16.1 Tires, PrecutterSILAGE PARTSGREASE BANKSNET AND TWINEMAIN DRIVELINE CUT OUT CLUTCH

21,579.00

PACKAGE CONFIGURATIONS0901 0901 Round Baler Package

560M 0901 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1010 540 RPM PTO Hookup (CV) with Slip Clutch3. 2020 14L x 16.1, 8PR, Hi-Flo Tires4. 3000 Regular Pickup with Twine System5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5500 CoverEdge Surface Wrap with Twine

In Configuration

0902 0902 Round Baler Package560M 0902 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1010 540 RPM PTO Hookup (CV) with Slip Clutch3. 2020 14L x 16.1, 8PR, Hi-Flo Tires4. 3000 Regular Pickup with Twine System

In Configuration


560M Round BalerContinued



List PriceSuggested

USD ($)

PACKAGE CONFIGURATIONS ...Continued...5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5550 CoverEdge Surface Wrap Only

0903 0903 Round Baler Package560M 0903 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1010 540 RPM PTO Hookup (CV) with Slip Clutch3. 2020 14L x 16.1, 8PR, Hi-Flo Tires4. 3000 Regular Pickup with Twine System5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5595 Less Surface Wrap - Twine Only

In Configuration

0904 0904 Round Baler Package560M 0904 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1010 540 RPM PTO Hookup (CV) with Slip Clutch3. 2020 14L x 16.1, 8PR, Hi-Flo Tires4. 3020 MegaWide Pickup5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5500 CoverEdge Surface Wrap with Twine

In Configuration

0905 0905 Round Baler Package560M 0905 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1010 540 RPM PTO Hookup (CV) with Slip Clutch3. 2020 14L x 16.1, 8PR, Hi-Flo Tires4. 3020 MegaWide Pickup5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5550 CoverEdge Surface Wrap Only

In Configuration

0906 0906 Round Baler Package560M 0906 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1010 540 RPM PTO Hookup (CV) with Slip Clutch3. 2020 14L x 16.1, 8PR, Hi-Flo Tires4. 3020 MegaWide Pickup5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5595 Less Surface Wrap - Twine Only

In Configuration

0920 920 Round Baler Package560M 0920 Round Baler Package1. 0501 DRY HAY Baler Configuration or 0502 SILAGE Baler Configuration2. 1010 540 RPM PTO Hookup (CV) with Slip Clutch3. 2030 21.5 - 16.1 10 Ply Tires4. 3020 MegaWide Pickup5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5500 CoverEdge Surface Wrap With Twine

In Configuration

0921 0921 Round Baler Package560M 0921 Round Baler Package1. 0501 DRY HAY Baler Configuration or 0502 SILAGE Baler Configuration2. 1010 540 RPM PTO Hookup (CV) with Slip Clutch3. 2030 21.5 - 16.1 10 Ply Tires4. 3020 MegaWide Pickup5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5550 CoverEdge Surface Wrap Only

In Configuration

0922 0922 Round Baler Package560M 0922 Round Baler Package1. 0501 DRY HAY Baler Configuration or 0502 SILAGE Baler Configuration2. 1020 1 3/8 In. 1000 RPM PTO Hookup (CV) with Slip Clutch3. 2030 21.5 - 16.1 10 Ply Tires4. 3020 MegaWide Pickup

In Configuration





List PriceSuggested

USD ($)

PACKAGE CONFIGURATIONS ...Continued...5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5500 CoverEdge Surface Wrap With Twine

0923 0923 Round Baler Package560M 0923 Round Baler Package1. 0501 DRY HAY Baler Configuration or 0502 SILAGE Baler Configuration2. 1020 1 3/8 In. 1000 RPM PTO Hookup (CV) with Slip Clutch3. 2030 21.5 - 16.1 10 Ply Tires4. 3020 MegaWide Pickup5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5550 CoverEdge Surface Wrap Only

In Configuration

0924 0924 Round Baler Packages560M 0924 Round Baler Package1. 0501 DRY HAY Baler Configuration or 0502 SILAGE Baler Configuration2. 1030 1 3/4 In. 1000 RPM PTO Hookup (CV) with Slip Clutch3. 2030 21.5 - 16.1 10 Ply Tires4. 3020 MegaWide Pickup5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5500 CoverEdge Surface Wrap With Twine

In Configuration

0925 0925 Round Baler Package560M 0925 Round Baler Package1. 0501 DRY HAY Baler Configuration or 0502 SILAGE Baler Configuration2. 1030 1 3/4 In. 1000 RPM PTO Hookup (CV) with Slip Clutch3. 2030 21.5 - 16.1 10 Ply Tires4. 3020 MegaWide Pickup5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5550 CoverEdge Surface Wrap Only

In Configuration

0935 0935 Round Baler Package560M 0935 Round Baler Package1. 0503 PRECUTTER Baler Configuration2. 1020 1-3/8 In. 1000 RPM PTO Hookup (CV) with Cam Clutch3. 2030 21.5 - 16.1 10 Ply4. 3040 Precutter Pickup5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5500 CoverEdge Surface Wrap with Twine

In Configuration

0936 0936 Round Baler Package560M 0936 Round Baler Package1. 0503 PRECUTTER Baler Configuration2. 1030 1 3/4 In. 1000 RPM PTO Hookup (CV) with Cam Clutch3. 2030 21.5 - 16.1 10 Ply4. 3040 Precutter Pickup5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5500 CoverEdge Surface Wrap with Twine

In Configuration

0907 0907 Round Baler Package560M 0907 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1010 540 RPM PTO Hookup (CV) with Slip Clutch3. 2030 21.5 - 16.1 10 Ply Tires4. 3020 MegaWide Pickup5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5595 Less Surface Wrap - Twine Only

In Configuration

0908 0908 Round Baler Package560M 0908 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1020 1 3/8 In. 1000 RPM PTO Hookup (CV) with Slip Clutch3. 2020 14L x 16.1, 8PR, Hi-Flo Tires4. 3020 MegaWide Pickup

In Configuration





List PriceSuggested

USD ($)

PACKAGE CONFIGURATIONS ...Continued...5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5500 CoverEdge Surface Wrap With Twine

0909 0909 Round Baler Package560M 0909 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1020 1 3/8 In. 1000 RPM PTO Hookup (CV) with Slip Clutch3. 2020 14L x 16.1, 8PR, Hi-Flo Tires4. 3020 MegaWide Pickup5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5550 CoverEdge Surface Wrap Only

In Configuration

0910 0910 Round Baler Package560M 0910 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1020 1 3/8 In. 1000 RPM PTO Hookup (CV) with Slip Clutch3. 2020 14L x 16.1, 8PR, Hi-Flo Tires4. 3020 MegaWide Pickup5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5595 Less Surface Wrap - Twine Only

In Configuration

0911 0911 Round Baler Package560M 0911 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1020 1 3/8 In. 1000 RPM PTO Hookup (CV) with Slip Clutch3. 2030 21.5 - 16.1 10 Ply Tires4. 3020 MegaWide Pickup5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5595 Less Surface Wrap - Twine Only

In Configuration

POWER TAKE-OFF (PTO) DRIVELINE1010 540 rpm Power Take-Off (PTO) Hookup

With Slip ClutchIn Base Price

1020 35 mm (1-3/8 in.) 1000 rpm Power Take-Off (PTO) HookupWith Cam ClutchWith Slip Clutch

Same Price


147.00

BALE EJECTION4000 Bale Push Bar 1,547.00

4050 Accumulator ReadyAccumulator Ready Baler will include Push Bar A-Arms and hardware.

1,526.00

4095 Less Push Bar In Base Price

WRAPPING SYSTEM

Surface Wrap5500 CoverEdge Surface Wrap, with Twine 6,781.00





List PriceSuggested

USD ($)

WRAPPING SYSTEM ...Continued...5550 CoverEdge Surface Wrap, Less Twine 5,315.00

Twine Wrap5595 Twine Only, Less CoverEdge Surface Wrap In Base Price

WHEELS AND TIRES2020 14L x 16.1 in., 8 PR HiFlow tires In Base Price

2030 21.5L - 16.1 in. Hi-Flotation Tires 1,625.00

PICKUP3000 Regular Pickup

Includes Gate Crop Deflector when ordered WITH CoverEdge Surface Wrap (Code 5500).See Gate Crop Deflector Kit (BE31105) in 'Attachments for Field Conversion' section fororders LESS CoverEdge Surface Wrap (Code 5595).

In Base Price

3020 MegaWidePlus PickupWith Slip-Clutch Alert and CompensationIncludes Pickup Gauge Wheels, Right and Left.Includes Pickup Gauge Wheels, Right and Left.

4,603.00

3040 Precutter Pickup5 FOOT PRECUTTER PICKUPPRECUTTER PICKUP GAUGE WHEELSFeed Unit, 5FT RB PRECUTTER ROTORFeed Unit, RB PRECUTTER PICKUP DRIVESFeed Unit, RB PRECUTTER ROTOR DRIVESFEED UNIT, BAFFLEFeed Unit, 5FT RB PRECUTTER 20 KNIFE FLOOR

4,603.00

B-WRAP8167 B-Wrap

Factory Installed B-Wrap Kit362.00

DISPLAYS9011 Mounting Brackets for Monitor or Display or Controller - 5020, 5025, 6000, 7000, or 8000

Series Cab TractorsFor mounting BaleTrak Pro monitor to 5020, 5025, 6000, 6005, 6010, 6015, 6020, 7000,7010, 7020, or 8000 Series Cab Tractors.

76.00

9012 Mounting Brackets for Monitor or Display Controller - John Deere Sound-Gard Body CabTractorsFor mounting BaleTrak Pro monitor to John Deere tractors with Sound-Gard Body cab.

76.00

HYDRAULIC PICKUP LIFT8100 Hydraulic Pickup Lift with Down Stop

Balers with MegaWide Plus Pickup ONLY.Requires tractor equipped with two Selective Control Valve Functions.Balers with Regular Pickup ONLY.Requires tractor equipped with two Selective Control Valve Functions.

532.00





List PriceSuggested

USD ($)

HYDRAULIC PICKUP LIFT ...Continued...Balers with MegaWide Plus Pickup ONLY.Requires tractor equipped with two Selective Control Valve Functions.

KNIFE HOLDER8110 Knife Storage Holder

Option is only available for the Precutter Configuration50.00

PICKUP9002 Gathering Wheels

Balers with Regular and MegaTooth Pickup ONLY.1,681.00

KNIVES9121 21 Knife Replacement Bundle 524.00

9123 20 Knife-Blank Filler BundleIf the Precutter will not be used to cut and size crop, these blanks can replace the knives to fillthe void and keep material out of the floor to allow for easier installation of the knives at alater date.

524.00

HIGH MOISTURE KITS9008 High Moisture Kit

1.52 m (5 ft) Wide.1.21 m (4 ft) Wide.Includes starter roll scraper knife and #13 roll scraper.

779.00

SIDE-SHEET ENHANCEMENTS9650 Side-Sheet Enhancement Kit

Replaceable wear liners made from abrasion resistant steel. Intended for highly abrasive cropssuch as corn stalks and peanut hay. Includes liners and attaching hardware. Can be used torepair balers with already worn side-sheets.

1,609.00

DENSITY CONTROL9014 Variable Core Valve

For 466, 566, 467, 567, 468, 568, 469, 569, 460 and 560 Models.Available only for machines ordered with option 5050-Electric Tie.

419.00

GREASING SYSTEM9143 Non Premium Non Precutter Grease Bank X69

BE32314 Non Premium Non Precutter Grease Bank X69533.00

WEAR PARTS BOX9660 Round Baler Wear Parts Box

25 of the most common wear parts for the John Deere 8, 9 and 0 Series 6 foot diameter balers.2,259.00





List PriceSuggested

USD ($)

WEAR PARTS BOX ...Continued...Comes in a durable box that can be kept in the truck or the shop.

ATTACHMENTS FOR FIELD CONVERSIONAttachments ordered from this section are field installed. These Attachments are in addition tofactory installed options.

Bale EjectionBE24128 Bale Push Bar 1,871.10

Driveline Conversions - To 1000 RPM from 540 RPMSee Service Parts to confirm application. In case of conflicting information, Service Partsinformation supersedes that below.

E82511 Decal, Warning 1000 RPM 4.73

AE73355 Front Yoke and Lockback Collar, 1-3/4 In. 1000 RPM 414.76


AE54323 Output Shaft, 1000 RPM 300.15

AE73352 PTO Driveline, Front Half with Lockback Collar, 1-3/4 In. 1000 RPM 2,409.69



E96695 Slip Clutch Disk Spring, 1000 RPM 193.02


A54618 Decal, Warning 540 RPM 6.15


AE59637 Front Yoke with Lockback Collar, 540 RPMRequires Universal Joint (AE73351) ordered separately from Service Parts.

341.67


AE73356 PTO Driveline, Front Half with Lockback Collar, 540 RPMRequires Plastic Lower Safety Shield (AE73557), ordered separately from Service Parts, tocomplete installation on PTO shafts originally equipped with steel safety shield.

1,303.60


1,232.93






List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...

DrivelinesBE32272 PTO Driveline, 1-3/4 In. 1000 RPM Telescoping Tractor Hookup with Slip Clutch

ONLY for 569 Round Baler and 569 Sllage Special Models.1,861.20

BE32271 PTO Driveline, 1-3/8 In. 1000 RPM Telescoping Tractor Hookup with Slip ClutchFor 9 Series - 469, 469 Silage, 569 and 559 Silage Balers.

1,679.70

BE32270 PTO Driveline, 540 RPM Telescoping Tractor Hookup with Slip ClutchFor 9 Series - 459, 459 Silage, 559, 559 Silage, 469, 469 Silage, 569 and 569 Silage Balers.

1,690.70

ElectricalRE17282 7-Terminal Electrical Outlet Socket

For tractor with no rear electrical outlet for implements.95.70

AE50549 Convenience Outlet (3-Pin)For use on tractors that do not have a convenience outlet or do not provide the requiredvoltage for BaleTrak Pro monitors through the tractor's convenience outlet. Wiring harnessconnects directly to the battery.

98.02

AA37254 Harness, Convenience OutletFor adapting "5" and "6" Series monitors/displays/controllers with 3-Terminal femaleconnector to 2-Terminal female tractor convenience outlet.

109.66

AE50531 Harness, Convenience OutletFor adapting "5" and "6" Series monitors/displays/controllers with 2-Terminal maleconnectors to 3-Terminal female tractor convenience outlet.

86.64

Forming ChamberBE32259 Auxiliary Take-up Roller 554.40

BE31105 Crop Deflector KitIncluded with balers ordered WITH CoverEdge Surface Wrap AND Regular or MegaToothpickup ONLY.Minimizes possible crop buildup in the corners of the rear gate.Recommended when baling cornstalks or other very dry, brittle crops.Can be field-installed on balers, new orders or previously shipped, built withoutfactory-installed deflectors.

484.00

BE32443 Silage Special Kit - 5' WideIncludes staggerd belt roll auger kit and starter roll scraper knife. Recommended for balingsilage hay and very dry brittle crops.

1,928.30

Hitch and DrawbarAL81724 Drawbar Drop-Down Kit

For 6000 Series John Deere Tractors - 3 In. Drop.474.10

RE63147 Drawbar Drop-Down KitFor 7000 Series John Deere Tractors - 2 In. Drop.Not compatible with Hi-Crop models.

327.80

BE32262 Drawbar Shield 56.10

BE24261 Safety Chain for Towed Equipment, 20,000 Lb (90 kN) 93.50





List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE24260 Safety chain for towed equipment, 4535.924 kg (10,000 lb) 44.00

HydraulicsSW700-1510 Fasse Hydraulic Multiplier Valve

1) For tractors with only 1 SCV.2) Includes ISO hydraulic couplers and switch box.3) For non ISO tractors, appropriate couplers will need to be ordered through Parts.

538.47

AE52498 Hydraulic Pressure Reduction Kit for High Flow/High Pressure Tractors 262.07

Monitors/Displays/ControllersBE30007 BaleTrak Pro Monitor LESS Mounting Brackets

(Order if Second Monitor is Desired)1) Connects to Tractor 3-Terminal Convenience Outlet. For tractors not equipped with aConvenience Outlet, order AE50549, 3-Terminal Convenience Outlet Wiring Harness fromParts.2) See Attachments for Field Conversion section to order Mounting Brackets.

1,590.60

A53254 L Mount Bracket 51.64

A54171 Mounting Bracket for Console 44.13

E88560 Mounting Bracket for Monitor/Display/Controller -John Deere Sound-Gard Body Cab Tractors

45.70

BE23864 Mounting Brackets for Monitor/Display/Controller -5000 or 5010 Series Cab TractorFor mounting BaleTrak Pro monitor to 5000 or 5010 Series Cab Tractor.

91.30





List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE23863 Mounting Brackets for Monitor/Display/Controller -

5000 or 6000 Series OS TractorsFor mounting Electric Twine Control Module only to 5000 or 6000 Series Operator StationTractor ROPS.Clamps to Roll-Over Protective Structure.

ORDERING INSTRUCTIONS FOR MOUNTING ELECTRIC TWINE CONTROL MODULE:

For mounting the Electric Twine Control Module in John Deere 5000 (with Cab), 6000 and7000 Series Tractors with ComfortGard Cabs and on all 7000 Series Open Station Tractors.Order the following brackets and hardware from Parts:A54171, Console Mount Bracket1 - 19M7784, Screw (M10 x 20)A53254, L Mount Bracket2 - 19M7784, Screw (M10 x 20)

For mounting the Electric Twine Control Module in John Deere Tractors with Sound-GardBody.Order the following plate and hardware from Parts:E88560, Console Plate2 - 03H1701, Cge. Bolt (1/4 x 3/4)2 - 24H1657, Washer (21/64 x 1-1/4 x 7/64)2 - 14H952, Wing Nut (1/4)

For mounting the Electric Twine Control Module on Open Station John Deere 5000 and 6000Series Tractors.Order BE23863, Mounting Brackets (Clamps on ROP Support).Also order the following brackets and hardware from Parts:A54171, Console Mount Bracket1 - 19M7784, Screw (M10 x 20)A53254, L Mount Bracket

91.30

BE24231 Mounting Brackets for Monitor/Display/Controller -5020 Series IOOS TractorsFor mounting BaleTrak Pro monitor to 5020 Series Isolated Open Operator Station TractorsONLY.

117.70

BE23840 Mounting Brackets for Monitor/Display/Controller -6000 Series OS or 7000 Series TractorFor mounting BaleTrak Pro monitor to 6000 Series Operator Station Tractors (SN148721 andbelow) or ALL 7000 Series Tractors.

92.40

BE23862 Mounting Brackets for Monitor/Display/Controller -6000, 6010, 6020 Series OS TractorsFor mounting BaleTrak Pro monitor to 6000, 6010 or 6020 Series Open Operator StationTractors (Standard models SN148722 and above or Low Profile models SN148787 and above).

173.80

BE23963 Mounting Brackets for Monitor/Display/Controller - 6003, 6005, or 7005 Series OS TractorsFor mounting BaleTrak Pro monitor to 6403, 6603, 6405, 6605 or 7405 Open OperatorStation Tractors.

185.90

BE32327 Slip Clutch Alert and Automatic CompensationRequires BaleTrak Pro Monitor and MegaWidePlus or MegaTooth pickup. Included inMegaWidePlus (Code 3020) or MegaTooth Pickup (Code 3010) for MY2010 and newermodels.

374.00

Operator EnvironmentRE20352 Exterior Convex Rearview Mirror with Mounting Bracket for

John Deere Tractors with Sound-Gard Body197.06





List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...TY15133 Fire Extinguisher Mounting Bracket

Required to mount TY25183 Fire Extinguisher.Also order (4) 37M7058 Self-Tapping Screws from Parts.

38.99

TY25183 Fire Extinguisher, Water Type (U.S. and Canada)Requires TY15133 Mounting Bracket and (4) 37M7058 Self-Tapping Screws from Parts.

142.49

PICKUPBE32241 Hydraulic Pickup Lift with Down Stop

Balers with Regular Pickup ONLY. Requires tractor equipped with two Selective Control ValveFunctions.

580.80

PickupBE32310 Corn Cob Filler Plates

8 and 9 Series Models only with MegaWide Pickup with Roller Baffle. For improved tooth lifeand prevention of corn cobs lodging in pickup.

374.00

BE32257 Corn Stalk Compression Rack8 and 9 Series Models only with MegaWide Pickup with Roller Baffle. For improved capacityin chopped (fluffy) cornstalks.

622.60

TWINE WRAPBE24157 Adjustable Twine Guide 202.40

TiresBE31125 21.5L-16.1 In. Hi-Flotation Tire Conversion

For MegaWide or MegaWidePlus Pickups ONLY. Will cause feeding problems with Regular orMegaTooth Pickups.Includes set of 21.5L-16.1 In. tires/wheels, required 8-bolt hub/spindle assemblies, andattaching parts.

4,249.30

Twine and Surface WrapBE32449 CoverEdge Surface Wrap Bundle

Spanish or French Operator Manual and Decal Kit must be ordered separately.8,571.20

BE32467 Standard B-wrap KitThe B-wrap kit is required to use B-wrap material. Balers must be 7, 8, or 9 Series (nonpremium) with a BaleTrak Pro monitor. The speed compensation/slip clutch alert kit is alsorequired.See www.ambraco.com for more details regarding the B-Wrap material only.

438.90




61.6 In. (1565mm) Wide Up to 72 In. (1829mm)Diameter Bale Weighing up to 2400 lb. (1089kg)Eight 7 In. (178mm) Wide, DiamondTough Triple WeaveBelts Diamond Tread Friction Surface Belts Mato,Plate-Type Belt Splices MegaWidePlus Plus Pickup:78 In. (2.0 M), Inside 87 In. (2.2 M), Flare toFlare Chain Drive Four-Bar Pickup Reel (four leftand four right), 120 Teeth Adjustable HayCompressors Adjustable Height Control Side FlareCrop Guides Pickup Gauge Wheels, Right and LeftAdjustable Roller Baffle Automatic Slip ClutchAlert and Speed Compensation Constant Velocity PTOHookup - Free-Rotation, Lockback Collar, SlipClutch Protected Adjustable Hydraulic DensityControl with Pressure Gauge Large Feed OpeningPowered Roundbar Starter Roll Staggered Belt RollBearing Protectors Electric Twine Wrap-Double ArmAdjustable, Self-Activated Visual Twine MovementIndicator Adjustable Twine Guides Eight Ball TwineStorage Adjustable Wheel Spindles Screw-type JackMechanical Bale Diameter Indicator Hinged ShieldsHydraulic Gate Lockout Flashing Warning Lights withTurning Signal 10,000 lbs. (45 kN) Safety ChainBale-Trak Pro Monitor/Controller: (Less Mounting

Brackets) Monitor Functions: Gate Latched-ReadyBale Shape Indicators Near Full Size Alert FullBale Alarm Bale Full-Size Wrap Started OversizeBale Alert Gate Partially Open-Stop Display BaleSize Out of Net Net Cutoff Selection of Twine orNet On Board Diagnostics Bale Counter Low VoltageIndicator Display Error Codes Bale Size CalibrationManual Actuator Movement with Electronic BypassController Functions: Net or Twine Application AutoWrap Cycle Control of Bale Size Control of TwineSpacing/Net Wraps Number of End Wraps End WrapLocation Control of Soft Core (Connects to Tractor3-Terminal Convenience Outlet) For Tractors notEquipped with a Convenience Outlet, Order AE50549,3-Terminal Convenience Outlet Wiring Harness fromParts. Balers Equipped with Hydraulic Pickup LiftRequire Tractor with Two SCV's.


List PriceSuggested

USD ($)


BASE MACHINE2371E 560M PR Round Baler 43,728.00

DESTINATION





Same Price


Same Price


560M Dry Hay Baler ConfigurationCOMMON, ADJUSTABLE CLEVIS2.2M MegaWide Plus PickupSLIP CLUTCH ALERTBaleTrac Pro Display

In Base Price


560M PR Round BalerEquipment for Base Machine



List PriceSuggested

USD ($)

BALER CONFIGURATION ...Continued...MegaWide Plus RotorMegaWide Plus Baffle and Compression RackTWINE

0502 SILAGE Baler Configuration560M Silage Baler ConfigurationSILAGE IDENTIFIER DECALSMAIN FRAME, 5X6 BALERAUGER, 560 SILAGE PARTSTONGUE, COMMON, ADJUSTABLE CLEVISBale Trac Pro Display

2,195.00


560M PR 0950 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1010 540 RPM PTO Hookup (CV) with Slip Clutch3. 2030 21.5 - 16.1 10 Ply Tires4. 3020 MegaWide Pickup5. 4000 Pushbar6. 5500 CoverEdge Surface Wrap with Twine7. 8100 Factory Installed Hyd. Pickup Lift

In Configuration

0951 0951 Round Baler Package560M PR 0951 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1020 1 3/8 In. 1000 RPM PTO Hookup (CV) with Slip Clutch3. 2030 21.5 - 16.1 10 Ply Tires4. 3020 MegaWide Pickup5. 4000 Pushbar6. 5500 CoverEdge Surface Wrap with Twine7. 8100 Factory Installed Hyd. Pickup Lift

In Configuration

0955 0955 Round Baler Package560M PR 0955 Round Baler1. 0502 SILAGE Baler Configuration2. 1020 1 3/8 In. 1000 RPM PTO Hookup (CV) with Slip Clutch3. 2030 21.5 - 16.1 10 Ply Tires4. 3020 MegaWide Pickup5. 4000 Pushbar6. 5500 CoverEdge Surface Wrap with Twine7. 8100 Factory Installed Hyd. Pickup Lift

In Configuration




Same Price


WRAPPING SYSTEM


560M PR Round BalerContinued



List PriceSuggested

USD ($)

WRAPPING SYSTEM ...Continued...


WHEELS AND TIRES2030 21.5L - 16.1 in. Hi-Flotation Tires 1,625.00

PICKUP3020 MegaWidePlus Pickup

With Slip-Clutch Alert and CompensationIncludes Pickup Gauge Wheels, Right and Left.Includes Pickup Gauge Wheels, Right and Left.

4,603.00

3040 Precutter Pickup5 FOOT PRECUTTER PICKUPPRECUTTER PICKUP GAUGE WHEELSFeed Unit, 5FT RB PRECUTTER ROTORFeed Unit, RB PRECUTTER PICKUP DRIVESFeed Unit, RB PRECUTTER ROTOR DRIVESFEED UNIT, BAFFLEFeed Unit, 5FT RB PRECUTTER 20 KNIFE FLOOR

4,603.00



76.00


Balers with MegaWide Plus Pickup ONLY.Requires tractor equipped with two Selective Control Valve Functions.Balers with Regular Pickup ONLY.Requires tractor equipped with two Selective Control Valve Functions.Balers with MegaWide Plus Pickup ONLY.Requires tractor equipped with two Selective Control Valve Functions.

532.00



419.00






List PriceSuggested

USD ($)


ElectricalAE50549 Convenience Outlet (3-Pin)

For use on tractors that do not have a convenience outlet or do not provide the requiredvoltage for BaleTrak Pro monitors through the tractor's convenience outlet. Wiring harnessconnects directly to the battery.

98.02

Hitch and DrawbarBE32262 Drawbar Shield 56.10

Twine and Surface WrapBE32467 Standard B-wrap Kit

The B-wrap kit is required to use B-wrap material. Balers must be 7, 8, or 9 Series (nonpremium) with a BaleTrak Pro monitor. The speed compensation/slip clutch alert kit is alsorequired.See www.ambraco.com for more details regarding the B-Wrap material only.

438.90




61.6 In. (1565mm) Wide Up to 72 In. (1829mm)Diameter Bale Weighing up to 2400 lb. (1089kg)Eight 7 In. (178mm) Wide, DiamondTough Triple WeaveBelts Diamond Tread Friction Surface Belts Mato,Plate-Type Belt Splices Premium MegaWidePlus Pickup78 In. (2.0 M), Inside 87 In. (2.2 M), Flare toFlare Chain Drive Four-Bar Pickup Reel (four leftand four right), 120 Teeth Adjustable HayCompressors Adjustable Height Control Side FlareCrop Guides Larger Cam and Cam Bearings LargerSpider Gears with Bearings Pickup Gauge Wheels,Right and Left Adjustable Roller Baffle AutomaticCam Clutch Alert and Speed Compensation ConstantVelocity 540 RPM PTO Tractor Hookup -Free-Rotation, Lockback Collar, Cam ClutchProtected Adjustable Hydraulic Density Control withPressure Gauge Large Feed Opening Powered RoundbarStarter Roll Staggered Belt Roll Bearing ProtectorsElectric Twine Wrap-Double Arm Adjustable,Self-Activated Visual Twine Movement IndicatorAdjustable Twine Guides Eight Ball Twine Storage21.5L x 16.1, 10 PR Hi-Flotation Tires Screw-typeJack Mechanical Bale Diameter Indicator Gull WingComposite Doors Hydraulic Gate Lockout FlashingWarning Lights with Turning Signal 10,000 lbs. (45kN) Safety Chain Hydraulic Pickup Lift Variable

Core Valve Factory Installed Grease Bank SurfaceWrapping System CoverEdge Surface Wrap with TwineSystem Factory Installed B-Wrap Kit and SoftwareLESS ISO Bus display, display can be ordered (LessMounting Brackets) Display Functions: GateLatched-Ready Bale Shape Indicators Near Full SizeAlert Full Bale Alarm Bale Full-Size Wrap StartedOversize Bale Alert Gate Partially Open-StopDisplay Bale Size Out of Net Net Cutoff Third BaleShape Sensor Selection of Twine or Net On BoardDiagnostics Bale Counter Low Voltage IndicatorDisplay Error Codes Bale Size CalibrationController Functions: Net or Twine Application AutoWrap Cycle Control of Bale Size Control of TwineSpacing/Net Wraps Number of End Wraps End WrapLocation Control of Soft Core Tractor BalerAutomation Baler Automation Activation StandardSince baler is equipped with hydraulic pickup lift,the tractor must be equipped with two SCV's.


List PriceSuggested

USD ($)


BASE MACHINE2380E 560R Round Baler 64,808.00

DESTINATION





Same Price


Same Price


Same Price


Same Price


560R Round BalerEquipment for Base Machine



List PriceSuggested

USD ($)


560R Dry Hay Baler ConfigurationLevel 4 ROLLS W/NET2.2M MEGAWIDE HD - Level 4Wheel Kit - MegaWide Plus gauge wheel kitLevel 4 Driveline SLIP Clutch PROTECTION21.5L-16.1 TiresTONGUE, COMMON, ADJUSTABLE CLEVISGREASE BANKSHydraulic Pick-up LiftBaffle and Compressor Rack2 YEAR 12,000 BALE WARRANTYISO BUS ELECTRONICSTRACTOR BALER AUTOMATIONMAIN DRIVELINE CUT OUT CLUTCH PROTECTION

In Base Price

0503 Precutter Baler Configuration560R Precutter Baler Configuration20 KNIFE 5X6 SILAGE PRECUTTER2.2 METER PICKUPHYDRAULIC DROP FLOORPRECUTTER TONGUE ROUND BALER1000 RPM PRECUTTER GEARBOXSLIP CLUTCH ALERTPRECUTTER IDENTIFIER DECALSMEGAWIDE PLUS GAUGE WHEEL3RD ROLL DRIVE 5X621.5L-16.1 Tires, PrecutterSILAGE PARTSGREASE BANKSNET AND TWINEMAIN DRIVELINE CUT OUT CLUTCH PROTECTIONISOBUS ELECTRONICSLEVEL 4 PICKUP COMPONENTS2 YEAR/12,000 BALE WARRANTYTRACTOR BALER AUTOMATION

21,055.00


560R 0901 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1010 540 RPM PTO Hookup (CV) with Cam Clutch3. 1820 Less Display or 1823 BE32288 GS1800 Display or 1825 BE32315 GS3 2630 Display4. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar5. 5500 CoverEdge Surface Wrap with Twine

In Configuration

0902 0902 Round Baler Package560R 0902 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1010 540 RPM PTO Hookup (CV) with Cam Clutch3. 1820 Less Display or 1823 BE32288 GS1800 Display or 1825 BE32315 GS3 2630 Display4. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar5. 5550 Coveredge Surface Wrap ONLY

In Configuration

0903 0903 Round Baler Package560R 0903 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1020 1-3/8 In. 1000 RPM PTO Hookup (CV) with Cam Clutch3. 1820 Less Display or 1823 BE32288 GS1800 Display or 1825 BE32315 GS3 2630 Display4. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar5. 5500 CoverEdge Surface Wrap with Twine

In Configuration


560R Round BalerContinued



List PriceSuggested

USD ($)

PACKAGE CONFIGURATIONS ...Continued...0904 0904 Round Baler Package

560R 0904 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1020 1-3/8 In. 1000 RPM PTO Hookup (CV) with Cam Clutch3. 1820 Less Display or 1823 BE32288 GS1800 Display or 1825 BE32315 GS3 2630 Display4. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar5. 5550 Coveredge Surface Wrap ONLY

In Configuration

0905 0905 Round Baler Package560R 0905 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1030 1 3/4 In. 1000 RPM PTO Hookup (CV) with Cam Clutch3. 1820 Less Display or 1823 BE32288 GS1800 Display or 1825 BE32315 GS3 2630 Display4. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar5. 5500 CoverEdge Surface Wrap with Twine

In Configuration

0906 0906 Round Baler Package560R 0906 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1030 1 3/4 In. 1000 RPM PTO Hookup (CV) with Cam Clutch3. 1820 Less Display or 1823 BE32288 GS1800 Display or 1825 BE32315 GS3 2630 Display4. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar5. 5550 Coveredge Surface Wrap ONLY

In Configuration

0935 0935 Round Baler Package560R 0935 Round Baler Package1. 0503 PRECUTTER Baler Configuration2. 1020 1-3/8 In. 1000 RPM PTO Hookup (CV) with Cam Clutch3. 1820 Less Display or 1823 BE32288 GS1800 Display or 1825 BE32315 GS3 2630 Display4. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar5. 5500 CoverEdge Surface Wrap with Twine

In Configuration

0936 0936 Round Baler Package560R 0936 Round Baler Package1. 0503 PRECUTTER Baler Configuration2. 1030 1 3/4 In. 1000 RPM PTO Hookup (CV) with Cam Clutch3. 1820 Less Display or 1823 BE32288 GS1800 Display or 1825 BE32315 GS3 2630 Display4. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar5. 5500 CoverEdge Surface Wrap with Twine

In Configuration


With Cam ClutchSame Price

1020 35 mm (1-3/8 in.) 1000 rpm Power Take-Off (PTO) HookupWith Cam Clutch

In Base Price


147.00

BALE EJECTION4000 Bale Push Bar

For balers that will utilize Tractor Baler Automation a pushbar MUST be ordered with themachine.

1,547.00

4050 Accumulator ReadyAccumulator Ready Baler will include Push Bar A-Arms and hardware.Tractor Baler Automation will not work with the A520R and A420R Accumulator.

1,526.00





List PriceSuggested

USD ($)

BALE EJECTION ...Continued...

4095 Less Push BarFor balers that will utilize Tractor Baler Automation a pushbar MUST be ordered with themachine.

In Base Price

WRAPPING SYSTEM

Surface Wrap5500 CoverEdge Surface Wrap, with Twine In Base Price

5550 CoverEdge Surface Wrap, Less Twine -1,475.00

DISPLAYS1820 Less GreenStar Display In Base Price

1823 GreenStar 2 1800 DisplayDoes not include display harness (PF90687). Display shipped separately.

1,850.00


5,895.00

BRACKETS9748 ISOBUS Display Mounting Bracket

For 30, 40, 50, 55, 60, or 70 Series Tractors.170.00

9749 ISOBUS Display Mounting BracketFor 6000, 7000, and 8000 Series Tractors.

170.00

HARNESSES9750 Auxiliary ISOBUS Harness

For 30, 40, 50, 55, 60, or 70 Series Tractors or competitive tractor models without a currentISOBUS wiring harness installed. Requires a 3 terminal convenience outlet.Includes battery (AFH205692) harness and cab harness (AF205697).Due to restricted functionality, harness is recommended for Premium Round Baler use ONLY.

590.00








List PriceSuggested

USD ($)

KNIVES ...Continued...9123 20 Knife-Blank Filler Bundle

If the Precutter will not be used to cut and size crop, these blanks can replace the knives to fillthe void and keep material out of the floor to allow for easier installation of the knives at alater date.

524.00



779.00



1,609.00


25 of the most common wear parts for the John Deere 8, 9 and 0 Series 6 foot diameter balers.Comes in a durable box that can be kept in the truck or the shop.

2,259.00


DrivelinesBE32273 PTO Driveline, 1-3/4 In. 1000 RPM Telescoping Tractor Hookup with Cam Clutch

469, 569 Premium Baler Models.2,253.90

BE32287 PTO Driveline, 1-3/8 In. 1000 RPM Telescoping Tractor Hookup with Cam Clutch469, 569 Premium Baler Models.

2,088.90

BE32286 PTO Driveline, 540 RPM Telescoping Tractor Hookup with Cam Clutch469, 569 Premium Baler Models.

2,088.90



AE50549 Convenience Outlet (3-Pin)For tractor with no convenience outlet.

98.02


109.66





List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...AE50531 Harness, Convenience Outlet

For adapting "5" and "6" Series monitors/displays/controllers with 2-Terminal maleconnectors to 3-Terminal female tractor convenience outlet.

86.64



1,928.30




327.80



BE24260 Safety chain for towed equipment, 4535.924 kg (10,000 lb) 44.00



538.47

AE52498 Hydraulic Pressure Reduction Kit for High Flow/High Pressure Tractors435 or 535 Round Balers.

262.07

Monitors/Displays/ControllersBE24231 Mounting Brackets for Monitor/Display/Controller -

5020 Series IOOS TractorsFor mounting BaleTrak Pro monitor to 5020 Series Isolated Open Operator Station TractorsONLY.

117.70



AFH207443 Fire Extinguisher Mounting BracketRequired to mount TY25183 Fire Extinguisher.Also order 03M7184, (5) 14M7298, (4) 19M7407, and (4) 24M7024 to mount bracket.

176.51


142.49





List PriceSuggested

USD ($)



8 and 9 Series Models only with MegaWide Pickup with Roller Baffle. For improved tooth lifeand prevention of corn cobs lodging in pickup.8 Series Models only with MegaWide Pickup with Roller Baffle.

374.00

BE32257 Corn Stalk Compression Rack8 and 9 Series Models only with MegaWide Pickup with Roller Baffle. For improved capacityin chopped (fluffy) cornstalks.

622.60

Premium Baler DisplaysBE32278 Auxiliary ISOBus Harness

For 6000, 7000, and 8000 Series Tractors without a current ISOBus wiring harness installed.Requires a 3 terminal convenience outlet.Includes battery harness (AFH205691) and cab harness (AFH205697).Due to restricted functionality harness is recommended for Premium Round Baler Use.

495.00

Twine and Surface WrapBE32551 Premium B-wrap Kit

The B-wrap Kit is required to use B-wrap material. Balers must be Model Year 2013 or ModelYear 2014, 469 or 569 Premium Round Balers with an ISOBUS monitor.*Note: The Premium B-wrap kit is factory installed on all Model Year 2015, 469 and 569Premium Round Balers.See www.ambraco.com for more details regarding the B-Wrap material only.

438.90






THIS PAGE INTENTIONALLY LEFT BLANK


46.1 In. (1171mm) Wide Up to 72 In. (1829mm)Diameter Bale Weighing up to 1650 lb. (748 kg) Six7 In. (178mm) Wide, DiamondTough Triple Weave BeltsDiamond Tread Friction Surface Belts Mato, PlateType Belt Splices MegaWidePlus Pickup: 62.4 In.(1.6 M), Inside 71 In. (1.8 M), Flare to FlareChain Drive Four-Bar Pickup Reel, 96 TeethAdjustable Roller Baffle Adjustable Hay CompressorsAdjustable Height Control Side Flare Crop GuidesPickup Gauge Wheels, Right and Left Automatic SlipClutch Alert and Speed Compensation ConstantVelocity 540 RPM PTO Tractor Hookup -Free-Rotation, Lockback Collar, Slip ClutchProtected Adjustable Hydraulic Density Control withPressure Gauge Large Feed Opening Powered RoundbarStarter Roll Staggered Belt Roll Bearing ProtectorsElectric Twine Wrap-Double Arm Adjustable,Self-Activated Visual Twine Movement IndicatorAdjustable Twine Guides Eight Ball Twine Storage14L x 16.1, 8PR Hi-Flotation Tires Adjustable WheelSpindles Screw-type Jack Mechanical Bale DiameterIndicator Hinged Shields Hydraulic Gate LockoutFlashing Warning Lights with Turning Signal 10,000lbs. (45 kN) Safety Chain Bale-Trak Pro

Monitor/Controller: (Less Mounting Brackets)Monitor Functions: Gate Latched-Ready Bale ShapeIndicators Near Full Size Alert Full Bale AlarmBale Full-Size Wrap Started Oversize Bale AlertGate Partially Open-Stop Display Bale Size Out ofNet Net Cutoff Selection of Twine or Net On BoardDiagnostics Bale Counter Low Voltage IndicatorDisplay Error Codes Bale Size Calibration ManualActuator Movement with Electronic Bypass ControllerFunctions: Net or Twine Application Auto Wrap CycleControl of Bale Size Control of Twine Spacing/NetWraps Number of End Wraps End Wrap Location Controlof Soft Core (Connects to Tractor 3-TerminalConvenience Outlet) For tractors not equipped witha Convenience Outlet, order AE50549, 3-TerminalConvenience Outlet Wiring Harness from Parts.Balers equipped with Hydraulic Pickup Lift requiretractor with two SCV's.


List PriceSuggested

USD ($)



DESTINATION





Same Price


Same Price


Same Price


Same Price

0430 PortuguesePortuguese operator manual and text free decals.

Same Price





List PriceSuggested

USD ($)

OPERATOR'S MANUAL AND DECALS ...Continued...


460M Dry Hay Baler ConfigurationCOMMON, ADJUSTABLE CLEVIS1.8M MegaWide Plus PickupSLIP CLUTCH ALERTBaleTrac Pro DisplayMegaWide Plus RotorMegaWide Plus Baffle and Compression RackTWINE

In Base Price

0502 SILAGE Baler Configuration460M Silage Baler ConfigurationSILAGE IDENTIFIER DECALS4X6 SILAGE MAINFRAME460 SILAGE PARTSTONGUE, COMMON, ADJUSTABLE CLEVISSLIP CLUTCH ALERTBale Trac Pro Display

2,195.00

0503 Precutter Baler Configuration460M Precutter Baler Configuration14 KNIFE 4X6 SILAGE PRECUTTER2.2 METER PICKUPHYDRAULIC DROP FLOORPRECUTTER TONGUE ROUND BALER1000 RPM PRECUTTER GEARBOXSLIP CLUTCH ALERTPRECUTTER IDENTIFIER DECALSMEGAWIDE PLUS GAUGE WHEEL3RD ROLL DRIVE 4X621.5L-16.1 Tires, PrecutterSILAGE PARTSGREASE BANKSNET AND TWINEMAIN DRIVELINE - CUT OUT CLUTCH

16,864.00


460M 0920 Round Baler Package1. 0501 DRY HAY Baler Configuration or 0502 SILAGE Baler Configuration2. 1010 540 RPM PTO Hookup (CV) with Slip Clutch3. 2020 14L x 16.1, 8PR, Hi-Flo Tires4. 3020 MegaWide Pickup5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5595 Less Surface Wrap

In Configuration

0921 0921 Round Baler Package460M 0921 Round Baler Package1. 0501 DRY HAY Baler Configuration or 0502 SILAGE Baler Configuration2. 1010 540 RPM PTO Hookup (CV) with Slip Clutch3. 2020 14L x 16.1, 8PR, Hi-Flo Tires4. 3020 MegaWide Pickup5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5500 CoverEdge Surface Wrap with Twine

In Configuration

0922 0922 Round Baler Package460M 0922 Round Baler Package

In Configuration





List PriceSuggested

USD ($)

PACKAGE CONFIGURATIONS ...Continued...1. 0501 DRY HAY Baler Configuration or 0502 SILAGE Baler Configuration2. 1010 540 RPM PTO Hookup (CV) with Slip Clutch3. 2030 21.5 - 16.1 10 Ply Tires4. 3020 MegaWide Pickup5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5500 CoverEdge Surface Wrap with Twine

0923 0923 Round Baler Package460M 0923 Round Baler Package1. 0501 DRY HAY Baler Configuration or 0502 SILAGE Baler Configuration2. 1020 1-3/8 In. 1000 RPM PTO Hookup (CV) with Slip Clutch3. 2020 14L x 16.1, 8PR, Hi-Flo Tires4. 3020 MegaWide Pickup5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5595 Less Surface Wrap

In Configuration

0924 0924 Round Baler Packages460M 0924 Round Baler Package1. 0501 DRY HAY Baler Configuration or 0502 SILAGE Baler Configuration2. 1020 1-3/8 In. 1000 RPM PTO Hookup (CV) with Slip Clutch3. 2030 21.5 - 16.1 10 Ply Tires4. 3020 MegaWide Pickup5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5595 Less Surface Wrap

In Configuration

0925 0925 Round Baler Package460M 0925 Round Baler Package1. 0501 DRY HAY Baler Configuration or 0502 SILAGE Baler Configuration2. 1020 1-3/8 In. 1000 RPM PTO Hookup (CV) with Slip Clutch3. 2020 14L x 16.1, 8PR, Hi-Flo Tires4. 3020 MegaWide Pickup5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5500 CoverEdge Surface Wrap with Twine

In Configuration

0926 0926 Round Baler Package460M 0926 Round Baler Package1. 0501 DRY HAY Baler Configuration or 0502 SILAGE Baler Configuration2. 1020 1-3/8 In. 1000 RPM PTO Hookup (CV) with Slip Clutch3. 2030 21.5 - 16.1 10 Ply Tires4. 3020 MegaWide Pickup5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5500 CoverEdge Surface Wrap with Twine

In Configuration

0935 0935 Round Baler Package460M 0935 Round Baler Package1. 0503 PRECUTTER Baler Configuration2. 1020 1-3/8 In. 1000 RPM PTO Hookup (CV) with Cam Clutch3. 2030 21.5 - 16.1 10 Ply4. 3040 Precutter Pickup5. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar6. 5500 CoverEdge Surface Wrap with Twine

In Configuration




Same Price

1030 45 mm (1-3/4 in.) 1000 rpm Power Take-Off (PTO) Hookup 147.00





List PriceSuggested

USD ($)

POWER TAKE-OFF (PTO) DRIVELINE ...Continued...With Cam ClutchWith Slip Clutch


4050 Accumulator ReadyAccumulator Ready Baler will include Push Bar A-Arms and hardware.

1,526.00

4095 Less Push Bar In Base Price

WRAPPING SYSTEM







In Base Price

3040 Precutter Pickup4 FOOT PRECUTTER PICKUPPRECUTTER PICKUP GAUGE WHEELSFeed Unit, RB PRECUTTER PICKUP DRIVESFeed Unit, RB PRECUTTER ROTOR DRIVESFeed Unit, 4FT RB PRECUTTER ROTOR5' Mega wide Pickup ReelFEED UNIT, BAFFLEFeed Unit, 4FT RB PRECUTTER 14 KNIFE FLOOR

In Configuration

B-WRAP8167 B-Wrap



Series Cab TractorsFor mounting BaleTrak Pro monitor to 5020, 5025, 6000, 6005, 6010, 6015, 6020, 7000,

76.00





List PriceSuggested

USD ($)

DISPLAYS ...Continued...7010, 7020, or 8000 Series Cab Tractors.


76.00



532.00





280.00



779.00



1,609.00



419.00

GREASING SYSTEM9143 Non Premium Non Precutter Grease Bank X69 533.00





List PriceSuggested

USD ($)

GREASING SYSTEM ...Continued...BE32314 Non Premium Non Precutter Grease Bank X69



2,259.00


Bale EjectionBE24127 Bale Push Bar 1,791.90














341.67

AE74610 Output Shaft, 540 RPMFor 4' wide models. For 5, 6, 7, and 8 series machines.If a complete PTO shaft (BE31165) is ordered, only a 540 RPM Output Shaft (AE74610) isrequired to complete the conversion.

271.38





List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...AE73356 PTO Driveline, Front Half with Lockback Collar, 540 RPM

Requires Plastic Lower Safety Shield (AE73557), ordered separately from Service Parts, tocomplete installation on PTO shafts originally equipped with steel safety shield.

1,303.60


1,232.93


DrivelinesBE32271 PTO Driveline, 1-3/8 In. 1000 RPM Telescoping Tractor Hookup with Slip Clutch

For 9 Series - 469, 469 Silage, 569 and 559 Silage Balers.1,679.70


1,690.70




98.02


109.66


86.64



1,747.90




327.80








List PriceSuggested

USD ($)




538.47




1,590.60




45.70


91.30

BE23863 Mounting Brackets for Monitor/Display/Controller -5000 or 6000 Series OS TractorsFor mounting Electric Twine Control Module only to 5000 or 6000 Series Operator StationTractor ROPS.Clamps to Roll-Over Protective Structure.





91.30





List PriceSuggested

USD ($)



117.70


92.40


173.80


185.90

BE32327 Slip Clutch Alert and Automatic CompensationIncluded in base equipment for MY2010 and later models.Requires BaleTrak Pro Monitor and MegaWidePlus pickup. Included in MegaWidePlus Pickup(Code 3020) for MY2010 and newer models.

374.00



TY15133 Fire Extinguisher Mounting BracketRequired to mount TY25183 Fire Extinguisher.Also order (4) 37M7058 Self-Tapping Screws from Parts.

38.99


142.49


Balers with MegaWidePlus Pickup ONLY.Requires tractor equipped with two Selective Control Valve Functions.

580.80



374.00



4,249.30





List PriceSuggested

USD ($)



Spanish or French Operator Manual and Decal Kit must be ordered separately.8,481.00


438.90




46.1 In. (1171mm) Wide Up to 72 In. (1829mm)Diameter Bale Weighing up to 1650 lb. (748 kg) Six7 In. (178mm) Wide, DiamondTough Triple Weave BeltsDiamond Tread Friction Surface Belts Mato, PlateType Belt Splices MegaWidePlus Pickup: 62.4 In.(1.6 M), Inside 71 In. (1.8 M), Flare to FlareChain Drive Four-Bar Pickup Reel, 96 TeethAdjustable Roller Baffle Adjustable Hay CompressorsAdjustable Height Control Side Flare Crop GuidesPickup Gauge Wheels, Right and Left Automatic SlipClutch Alert and Speed Compensation ConstantVelocity 540 RPM PTO Tractor Hookup -Free-Rotation, Lockback Collar, Slip ClutchProtected Adjustable Hydraulic Density Control withPressure Gauge Large Feed Opening Powered RoundbarStarter Roll Staggered Belt Roll Bearing ProtectorsElectric Twine Wrap-Double Arm Adjustable,Self-Activated Visual Twine Movement IndicatorAdjustable Twine Guides Eight Ball Twine Storage14L x 16.1, 8PR Hi-Flotation Tires Adjustable WheelSpindles Screw-type Jack Mechanical Bale DiameterIndicator Hinged Shields Hydraulic Gate LockoutFlashing Warning Lights with Turning Signal 10,000lbs. (45 kN) Safety Chain Bale-Trak Pro

Monitor/Controller: (Less Mounting Brackets)Monitor Functions: Gate Latched-Ready Bale ShapeIndicators Near Full Size Alert Full Bale AlarmBale Full-Size Wrap Started Oversize Bale AlertGate Partially Open-Stop Display Bale Size Out ofNet Net Cutoff Selection of Twine or Net On BoardDiagnostics Bale Counter Low Voltage IndicatorDisplay Error Codes Bale Size Calibration ManualActuator Movement with Electronic Bypass ControllerFunctions: Net or Twine Application Auto Wrap CycleControl of Bale Size Control of Twine Spacing/NetWraps Number of End Wraps End Wrap Location Controlof Soft Core (Connects to Tractor 3-TerminalConvenience Outlet) For tractors not equipped witha Convenience Outlet, order AE50549, 3-TerminalConvenience Outlet Wiring Harness from Parts.Balers equipped with Hydraulic Pickup Lift requiretractor with two SCV's.


List PriceSuggested

USD ($)



DESTINATION





Same Price


Same Price


460M Dry Hay Baler ConfigurationCOMMON, ADJUSTABLE CLEVIS1.8M MegaWide Plus PickupSLIP CLUTCH ALERTBaleTrac Pro Display

In Base Price





List PriceSuggested

USD ($)

BALER CONFIGURATION ...Continued...MegaWide Plus RotorMegaWide Plus Baffle and Compression RackTWINE

0502 SILAGE Baler Configuration460M Silage Baler ConfigurationSILAGE IDENTIFIER DECALS4X6 SILAGE MAINFRAME460 SILAGE PARTSTONGUE, COMMON, ADJUSTABLE CLEVISSLIP CLUTCH ALERTBale Trac Pro Display

2,195.00


460M PR 0950 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1010 540 RPM PTO Hookup (CV) with Slip Clutch3. 2030 21.5 - 16.1 10 Ply Tires4. 3020 MegaWide Pickup5. 4000 Pushbar6. 5500 CoverEdge Surface Wrap with Twine7. 8100 Factory Installed Hyd. Pickup Lift

In Configuration

0951 0951 Round Baler Package460M PR 0951 Round Baler Package1. 0502 SILAGE Baler Configuration2. 1010 540 RPM PTO Hookup (CV) with Slip Clutch3. 2030 21.5 - 16.1 10 Ply Tires4. 3020 MegaWide Pickup5. 4000 Pushbar6. 5500 CoverEdge Surface Wrap with Twine7. 8100 Factory Installed Hyd. Pickup Lift

In Configuration




Same Price


WRAPPING SYSTEM


WHEELS AND TIRES2030 21.5L - 16.1 in. Hi-Flotation Tires 1,625.00





List PriceSuggested

USD ($)

WHEELS AND TIRES ...Continued...



In Base Price


In Configuration



76.00



532.00



419.00




98.02





List PriceSuggested

USD ($)




Balers with MegaWidePlus Pickup ONLY.Requires tractor equipped with two Selective Control Valve Functions.

580.80



438.90




46 In. (1171mm) Wide Up to 72 In. (1829mm) DiameterBale Weighing up to 2400 lb. (1089kg) Six 7 In.(178mm) Wide, DiamondTough Triple Weave BeltsDiamond Tread Friction Surface Belts Mato,Plate-Type Belt Splices Premium MegaWidePlus Pickup62.4 In. (1.6 M), Inside 71 In. (1.8 M), Flare toFlare Chain Drive Four-Bar Pickup Reel, 96 TeethAdjustable Hay Compressors Adjustable HeightControl Side Flare Crop Guides Larger Cam and CamBearings Larger Spider Gears with Bearings PickupGauge Wheels, Right and Left Adjustable RollerBaffle Automatic Cam Clutch Alert and SpeedCompensation Constant Velocity 540 RPM PTO TractorHookup - Free-Rotation, Lockback Collar, Cam ClutchProtected Adjustable Hydraulic Density Control withPressure Gauge Large Feed Opening Powered RoundbarStarter Roll Staggered Belt Roll Bearing ProtectorsElectric Twine Wrap-Double Arm Adjustable,Self-Activated Visual Twine Movement IndicatorAdjustable Twine Guides Eight Ball Twine Storage21.5L x 16.1, 10 PR Hi-Flotation Tires Screw-typeJack Mechanical Bale Diameter Indicator Gull WingComposite Doors Hydraulic Gate Lockout FlashingWarning Lights with Turning Signal 10,000 lbs. (45kN) Safety Chain Hydraulic Pickup Lift Variable

Core Valve Factory Installed Grease Bank SurfaceWrapping System CoverEdge Surface Wrap with TwineSystem Factory Installed B-Wrap Kit and SoftwareLESS ISO Bus display, display can be ordered (LessMounting Brackets) Display Functions: GateLatched-Ready Bale Shape Indicators Near Full SizeAlert Full Bale Alarm Bale Full-Size Wrap StartedOversize Bale Alert Gate Partially Open-StopDisplay Bale Size Out of Net Net Cutoff Selectionof Twine or Net On Board Diagnostics Bale CounterLow Voltage Indicator Display Error Codes Bale SizeCalibration Third Bale Shape Sensor ControllerFunctions Net or Twine Application Auto Wrap CycleControl of Bale Size Control of Twine Spacing/NetWraps Number of End Wraps End Wrap Location Controlof Soft Core Tractor Baler Activation BalerAutomation Activation Standard Since baler isequipped with hydraulic pickup lift, the tractormust be equipped with two SCV's.


List PriceSuggested

USD ($)


BASE MACHINE2350E 460R Round Baler 54,133.00

DESTINATION





Same Price


Same Price


Same Price


Same Price


460R Round BalerEquipment for Base Machine



List PriceSuggested

USD ($)


460R Dry Hay Baler ConfigurationLevel 4 ROLLS W/NET1.8M MEGAWIDE HD - Level 4Wheel Kit - MegaWide Plus gauge wheel kitLevel 4 Driveline SLIP Clutch PROTECTION21.5L-16.1 TiresTONGUE, COMMON, ADJUSTABLE CLEVISGREASE BANKSHydraulic Pick-up LiftBaffle and Compressor Rack2 YEAR 12,000 BALE WARRANTYISO BUS ELECTRONICSTRACTOR BALER AUTOMATIONMAIN DRIVELINE CUT OUT CLUTCH PROTECTION

In Base Price

0503 Precutter Baler Configuration460R Precutter Baler Configuration14 KNIFE 4X6 SILAGE PRECUTTER2.2 METER PICKUPHYDRAULIC DROP FLOORPRECUTTER TONGUE ROUND BALER1000 RPM PRECUTTER GEARBOXSLIP CLUTCH ALERTPRECUTTER IDENTIFIER DECALSMEGAWIDE PLUS GAUGE WHEEL3RD ROLL DRIVE 4X621.5L-16.1 Tires, PrecutterSILAGE PARTSGREASE BANKSNET AND TWINEMAIN DRIVELINE CUT OUT CLUTCH PROTECTIONISOBUS ELECTRONICSLEVEL 4 PICKUP COMPONENTS2 YEAR/12,000 BALE WARRANTYTRACTOR BALER AUTOMATION

16,340.00


460R 0901 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1010 540 RPM PTO Hookup (CV) with Cam Clutch3. 1820 Less Display or 1823 BE32288 GS1800 Display or 1825 BE32315 GS3 2630 Display4. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar5. 5500 CoverEdge Surface Wrap with Twine

In Configuration

0902 0902 Round Baler Package460R 0902 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1010 540 RPM PTO Hookup (CV) with Cam Clutch3. 1820 Less Display or 1823 BE32288 GS1800 Display or 1825 BE32315 GS3 2630 Display4. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar5. 5550 Coveredge Surface Wrap ONLY

In Configuration

0903 0903 Round Baler Package460R 0903 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1020 1-3/8 In. 1000 RPM PTO Hookup (CV) with Cam Clutch3. 1820 Less Display or 1823 BE32288 GS1800 Display or 1825 BE32315 GS3 2630 Display4. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar5. 5500 CoverEdge Surface Wrap with Twine

In Configuration





List PriceSuggested

USD ($)


460R 0935 Round Baler Package1. 0503 PRECUTTER Baler Configuration2. 1020 1-3/8 In. 1000 RPM PTO Hookup (CV) with Cam Clutch3. 1820 Less Display or 1823 BE32288 GS1800 Display or 1825 BE32315 GS3 2630 Display4. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar5. 5500 CoverEdge Surface Wrap with Twine

In Configuration

0936 0936 Round Baler Package460R 0936 Round Baler Package1. 0503 PRECUTTER Baler Configuration2. 1030 1 3/4 In. 1000 RPM PTO Hookup (CV) with Cam Clutch3. 1820 Less Display or 1823 BE32288 GS1800 Display or 1825 BE32315 GS3 2630 Display4. 4000 Pushbar or 4050 Bale Accumulator Ready or 4095 Less Pushbar5. 5500 CoverEdge Surface Wrap with Twine

In Configuration


With Cam ClutchSame Price


In Base Price


147.00

BALE EJECTION4000 Bale Push Bar

For balers that will utilize Tractor Baler Automation a pushbar MUST be ordered with themachine.

1,547.00

4050 Accumulator ReadyAccumulator Ready Baler will include Push Bar A-Arms and hardware.Tractor Baler Automation will not work with the A520R and A420R Accumulator.

1,526.00

4095 Less Push BarFor balers that will utilize Tractor Baler Automation a pushbar MUST be ordered with themachine.

In Base Price

WRAPPING SYSTEM

Surface Wrap5500 CoverEdge Surface Wrap, with Twine In Base Price

5550 CoverEdge Surface Wrap, Less Twine -1,475.00



1,850.00





List PriceSuggested

USD ($)

DISPLAYS ...Continued...1825 GreenStar 3 2630 Display

Does not include display harness (PF90687). Display shipped separately.5,895.00




170.00


For 30, 40, 50, 55, 60, or 70 Series Tractors or competitive tractor models without a currentISOBUS wiring harness installed. Requires a 3 terminal convenience outlet.Includes battery (AFH205692) harness and cab harness (AF205697).Due to restricted functionality, harness is recommended for Premium Round Baler use ONLY.

590.00





280.00



779.00



1,609.00

WEAR PARTS BOX





List PriceSuggested

USD ($)

WEAR PARTS BOX ...Continued...9660 Round Baler Wear Parts Box


2,259.00


DrivelinesBE32273 PTO Driveline, 1-3/4 In. 1000 RPM Telescoping Tractor Hookup with Cam Clutch

469, 569 Premium Baler Models.2,253.90

BE32287 PTO Driveline, 1-3/8 In. 1000 RPM Telescoping Tractor Hookup with Cam Clutch469, 569 Premium Baler Models.

2,088.90


2,088.90




98.02


109.66


86.64



1,747.90




327.80







List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE24260 Safety chain for towed equipment, 4535.924 kg (10,000 lb) 44.00



538.47


262.07

Monitors/Displays/ControllersBE24231 Mounting Brackets for Monitor/Display/Controller -


117.70




38.99

AFH207443 Fire Extinguisher Mounting BracketRequired to mount TY25183 Fire Extinguisher.Also order 03M7184, (5) 14M7298, (4) 19M7407, and (4) 24M7024 to mount bracket.

176.51


142.49



374.00

Premium Baler DisplaysBE32278 Auxiliary ISOBus Harness

For 6000, 7000, and 8000 Series Tractors without a current ISOBus wiring harness installed.Requires a 3 terminal convenience outlet.Includes battery harness (AFH205691) and cab harness (AFH205697).Due to restricted functionality harness is recommended for Premium Round Baler Use.

495.00

Twine and Surface WrapBE32551 Premium B-wrap Kit

The B-wrap Kit is required to use B-wrap material. Balers must be Model Year 2013 or ModelYear 2014, 469 or 569 Premium Round Balers with an ISOBUS monitor.*Note: The Premium B-wrap kit is factory installed on all Model Year 2015, 469 and 569Premium Round Balers.See www.ambraco.com for more details regarding the B-Wrap material only.

438.90




61.6 In. (1565mm) Wide Up to 60 In. (1829mm)Diameter Bale Weighing up to 2200 lb. (998kg) Eight7 In. (178mm) Wide, DiamondTough Triple Weave BeltsDiamond Tread Friction Surface Belts Mato,Plate-Type Belt Splices Regular Pickup: 61.4 In.(1.6 M), Inside 71 In. (1.8 M), Flare to FlareRoller Chain with V-Belt Drive Four-Bar PickupReel, 96 Teeth Adjustable Hay CompressorsAdjustable Height Control Side Flare Crop GuidesConstant Velocity 540 RPM PTO Tractor Hookup -Free-Rotation, Lockback Collar, Slip ClutchProtected Adjustable Hydraulic Density Control withPressure Gauge Large Feed Opening Powered RoundbarStarter Roll Staggered Belt Roll Bearing ProtectorsElectric Twine Wrap-Double Arm Adjustable,Self-Activated Visual Twine Movement IndicatorAdjustable Twine Guides Eight Ball Twine Storage14L x 16.1, 8PR Hi-Flotation Tires Adjustable WheelSpindles Screw-type Jack Mechanical Bale DiameterIndicator Hinged Shields Hydraulic Gate LockoutFlashing Warning Lights with Turning Signal 10,000lbs. (45 kN) Safety Chain Bale-Trak ProMonitor/Controller: (Less Mounting Brackets)

Monitor Functions: Gate Latched-Ready Bale ShapeIndicators Near Full Size Alert Full Bale AlarmBale Full-Size Wrap Started Oversize Bale AlertGate Partially Open-Stop Display Bale Size Out ofNet Net Cutoff Selection of Twine or Net On BoardDiagnostics Bale Counter Low Voltage IndicatorDisplay Error Codes Bale Size Calibration ManualActuator Movement with Electronic Bypass ControllerFunctions: Net or Twine Application Auto Wrap CycleControl of Bale Size Control of Twine Spacing/NetWraps Number of End Wraps End Wrap Location Controlof Soft Core (Connects to Tractor 3-TerminalConvenience Outlet) For tractors not equipped witha Convenience Outlet, order AE50549, 3-TerminalConvenience Outlet Wiring Harness from Parts.Balers equipped with Hydraulic Pickup Lift requiretractor with two SCV's.


List PriceSuggested

USD ($)



DESTINATION





Same Price


Same Price


Same Price


Same Price

BALER CONFIGURATION





List PriceSuggested

USD ($)

BALER CONFIGURATION ...Continued...0501 Dry Hay Baler Configuration

550M Dry Hay Baler ConfigurationIn Base Price

0502 SILAGE Baler Configuration550M Silage Baler ConfigurationSILAGE IDENTIFIER DECALSAuger, 550 Silage Kit

2,195.00


550M 0901 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 2020 14L x 16.1, 8PR, Hi-Flo Tires3. 3000 Regular Pickup4. 5595 Less Surface Wrap

In Configuration

0902 0902 Round Baler Package550M 0902 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 2020 14L x 16.1, 8PR, Hi-Flo Tires3. 3020 Wide Pickup4. 5595 Less Surface Wrap

In Configuration

0920 920 Round Baler Package550M 0920 Round Baler Package1. 0501 DRY HAY Baler Configuration or 0502 SILAGE Baler Configuration2. 2020 14L x 16.1, 8PR, Hi-Flo Tires3. 3020 Wide Pickup4. 5500 CoverEdge Surface Wrap

In Configuration

0921 0921 Round Baler Package550M 0921 Round Baler Package1. 0501 DRY HAY Baler Configuration or 0502 SILAGE Baler Configuration2. 2030 21.5 - 16.1 10 Ply Tires3. 3020 Wide Pickup4. 5500 CoverEdge Surface Wrap

In Configuration

WRAPPING SYSTEM





PICKUP3000 Regular Pickup In Base Price





List PriceSuggested

USD ($)

PICKUP ...Continued...Includes Gate Crop Deflector when ordered WITH CoverEdge Surface Wrap (Code 5500).See Gate Crop Deflector Kit (BE31105) in 'Attachments for Field Conversion' section fororders LESS CoverEdge Surface Wrap (Code 5595).


4,603.00

BALE EJECTION9003 Bale Ramp

Compatible with 4 ft x 5 ft and 5 ft x 5 ft Balers.Requires 2200 PSI Tractor Hydraulics.

1,432.00

B-WRAP8167 B-Wrap


TWINE WRAP9006 Adjustable Twine Guide

Left-hand and right-hand.Left Hand

184.00



76.00


76.00

9013 Mounting Brackets for Monitor or Display or Controller - 5000, 5010, or 5020 Series OSTractorsFor mounting BaleTrak Pro monitor to 5000, 5010, or 5020 Series Open Operator StationTractors (Straddle Mount Open Operator Station ONLY for 5020 Series models).

84.00



9001 Hydraulic Pickup Lift with Down StopBalers with MegaWidePlus Pickup ONLY.Requires tractor equipped with two Selective Control Valve Functions.Balers with MegaWidePlus Pickup ONLY.1) Requires tractor equipped with two Selective Control Valve Functions,OR2) Requires three Tractor Selective Control Valve Functions if baler has Hydraulic TwineWrap.

528.00





List PriceSuggested

USD ($)

PICKUP ...Continued...9000 Hydraulic Pickup Lift with Down Stop

Balers with Regular Pickup ONLY. Requires tractor equipped with two Selective Control ValveFunctions.Balers with Regular Pickup ONLY.1) Requires tractor equipped with two Selective Control Valve Functions,OR2) Requires three Tractor Selective Control Valve Functions if baler has Hydraulic TwineWrap.

528.00



779.00



419.00


Driveline Conversions - To 540 RPM from 1000 RPMAE54321 Output Shaft, 540 RPM

For 5' wide models. For 5, 6, 7, and 8 series machines.If a complete PTO shaft (BE31165) is ordered, only a 540 RPM Output Shaft (AE54321) isrequired to complete the conversion.

299.30

DrivelinesBE32270 PTO Driveline, 540 RPM Telescoping Tractor Hookup with Slip Clutch

For 9 Series - 459, 459 Silage, 559, 559 Silage, 469, 469 Silage, 569 and 569 Silage Balers.1,690.70




98.02


109.66


86.64





List PriceSuggested

USD ($)




484.00


1,928.30




327.80






538.47




1,590.60




45.70





List PriceSuggested

USD ($)


5000 or 5010 Series Cab TractorFor mounting BaleTrak Pro monitor to 5000 or 5010 Series Cab Tractor.

91.30

BE23863 Mounting Brackets for Monitor/Display/Controller -5000 or 6000 Series OS TractorsFor mounting Electric Twine Control Module only to 5000 or 6000 Series Operator StationTractor ROPS.Clamps to Roll-Over Protective Structure.





91.30


117.70


173.80


185.90


374.00







List PriceSuggested

USD ($)



38.99


142.49



4,249.30


Balers with Factory equipped BaleTrak Pro or BaleTrak Plus monitors ONLY.Spanish or French Operator Manual and Decal Kit must be ordered separately.

8,265.40


438.90




46.1 In. (1171 mm) Wide Up to 60 In. (1524 mm)Diameter Bale Weighing up to 1100 Lbs. (499 kg) Six7 In. (178mm) Wide, DiamondTough Triple Weave BeltsDiamond Tread Friction Surface Belts Mato, PlateType Belt Splices Regular Pickup: 45.9 In. (1.2 M),Inside 55.5 In. (1.4 M), Flare to Flare RollerChain with V-Belt Drive Four-Bar Pickup Reel, 72Teeth Adjustable Hay Compressors Adjustable HeightControl Side Flare Crop Guides Constant Velocity540 RPM PTO Tractor Hookup - Cat. 4, LockbackCollar, Slip Clutch Protected Fixed HydraulicDensity Control Large Feed Opening Powered RoundbarStarter Roll Staggered Belt Roll Bearing ProtectorsDouble Electric Twine Arms Visual Twine MovementIndicators Six Ball Twine Storage 14L x 16.1, 8PRHi Flotation Tires Adjustable Wheel Spindles ScrewType Jack Mechanical Bale Size Indicator HingedShields Hydraulic Gate Lockout Flashing WarningLights with Turning Signal 10,000 Lb. (45 kN)Safety Chain BaleTrak Pro Monitor/Controller: (LessMounting Brackets) Monitor Functions: GateClosed-Ready Bale Shape Indicators Near Full SizeAlert Full Bale Alarm Bale Full Size-Wrap StartedOversize Bale Alert Gate Partially Open DisplayBale Size Out of Net Net Cutoff Selection of Twine

or Net On Board Diagnostics Bale Counter LowVoltage Indicator Bale Size Calibration DisplayError Codes Manual Actuator Movement withElectronic Bypass Controller Functions: Net orTwine Application Auto Wrap Cycle Control of BaleSize Control of Twine Spacing/Net Wraps Number ofEnd Wraps End Wrap Location Control of Soft Core(Connects to Tractor 3-Terminal Convenience Outlet)One Tractor Selective Control Valve is requiredwhen baler is equipped with BaleTrak Pro orBaleTrak Plus Monitor/Controller. Two TractorSelective Control Valves are required when baler isequipped with BaleTrak Pro or BaleTrak PlusMonitor/Controller and Hydraulic Pickup Lift. Fortractors not equipped with a convenience outlet,order AE50549, 3-Terminal Convenience Outlet WiringHarness from Parts, see Attachments for FieldConversion.


List PriceSuggested

USD ($)



DESTINATION





Same Price


Same Price


Same Price


Same Price





List PriceSuggested

USD ($)


450M Dry Hay Baler Configuration1.8M MegaWide Plus PickupCOMMON, ADJUSTABLE CLEVISSLIP CLUTCH ALERTBale Trac Pro DisplayMegaWide Plus RotorMegaWide Plus Baffle and Compression RackTWINE

In Base Price

0502 SILAGE Baler Configuration450M Silage Baler Configuration4X5 MAIN FRAME BASE/SILAGEAUGER, 450 SILAGE PARTSTONGUE, COMMON, ADJUSTABLE CLEVISBale Trac Pro DisplaySILAGE IDENTIFIER DECALSSLIP CLUTCH ALERT

2,195.00

0503 Precutter Baler Configuration450M Precutter Baler Configuration14 KNIFE 4X5 SILAGE PRECUTTER2.2 METER PICKUPHYDRAULIC DROP FLOORPRECUTTER TONGUE ROUND BALER540RPM OR 1000 RPM PRECUTTER GEARBOXSLIP CLUTCH ALERTPRECUTTER IDENTIFIER DECALSMEGAWIDE PLUS GAUGE WHEEL3RD ROLL DRIVE 4X521.5L-16.1 Tires, PrecutterSILAGE PARTSGREASE BANKSNET AND TWINEMAIN DRIVELINE - CUT OUT CLUTCH

16,924.00


450M 0901 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1010 540 Slip Clutch3. 2010 11L - 14, 8-PR Tires4. 3000 Regular Pickup5. 5595 Less Surface Wrap

In Configuration

0902 0902 Round Baler Package450M 0902 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1010 540 Slip Clutch3. 2020 14L x 16.1, 8PR, Hi-Flo Tires4. 3000 Regular Pickup5. 5500 CoverEdge Surface Wrap with Twine

In Configuration

0920 920 Round Baler Package450M 0920 Round Baler Package1. 0501 DRY HAY Baler Configuration or 0502 SILAGE Baler Configuration2. 1010 540 Slip Clutch3. 2020 14L x 16.1, 8PR, Hi-Flo Tires4. 3020 Wide Pickup5. 5595 Less Surface Wrap

In Configuration





List PriceSuggested

USD ($)


450M 0921 Round Baler Package1. 0501 DRY HAY Baler Configuration or 0502 SILAGE Baler Configuration2. 1010 540 RPM PTO Hookup (CV) with Slip Clutch3. 2020 14L x 16.1, 8PR, Hi-Flo Tires4. 3020 MegaWide Pickup5. 5500 CoverEdge Surface Wrap with Twine

In Configuration

0922 0922 Round Baler Package450M 0922 Round Baler Package1. 0501 DRY HAY Baler Configuration or 0502 SILAGE Baler Configuration2. 1020 1000 1-3/8" Slip Clutch3. 2030 21.5 - 16.1 10 Ply Tires4. 3020 MegaWide Pickup5. 5500 CoverEdge Surface Wrap with Twine

In Configuration

0923 0923 Round Baler Package450M 0923 Round Baler Package1. 0501 DRY HAY Baler Configuration or 0502 SILAGE Baler Configuration2. 1010 540 Slip Clutch3. 2030 21.5 - 16.1 10 Ply Tires4. 3020 MegaWide Pickup5. 5500 CoverEdge Surface Wrap with Twine

In Configuration

0935 0935 Round Baler Package450M 0935 Round Baler Package1. 0503 PRECUTTER Baler Configuration2. 1010 540 Cam Clutch3. 2030 21.5 - 16.1 10 Ply Tires4. 3040 Pre Cutter Pickup5. 5500 CoverEdge Surface Wrap with Twine

In Configuration

0936 0936 Round Baler Package450M 0936 Round Baler Package1. 0503 PRECUTTER Baler Configuration2. 1020 1 3/8 In. 1000 RPM PTO Hookup (CV) with Cam Clutch3. 2030 21.5 - 16.1 10 Ply Tires4. 3040 Pre Cutter Pickup5. 5500 CoverEdge Surface Wrap with Twine

In Configuration


With Cam ClutchWith Slip Clutch

In Base Price


Same Price


147.00

WRAPPING SYSTEM






List PriceSuggested

USD ($)

WRAPPING SYSTEM ...Continued...




2010 11L - 14 in., 8 PR Tires -934.00

PICKUP3000 Regular Pickup


In Base Price


4,231.00


4,231.00



1,561.00

B-WRAP8167 B-Wrap




136.00


Series Cab Tractors76.00





List PriceSuggested

USD ($)

DISPLAYS ...Continued...For mounting BaleTrak Pro monitor to 5020, 5025, 6000, 6005, 6010, 6015, 6020, 7000,7010, 7020, or 8000 Series Cab Tractors.


76.00


84.00






528.00

9000 Hydraulic Pickup Lift with Down StopBalers with Regular Pickup ONLY. Requires tractor equipped with two Selective Control ValveFunctions.Balers with Regular Pickup ONLY.1) Requires tractor equipped with two Selective Control Valve Functions,OR2) Requires three Tractor Selective Control Valve Functions if baler has Hydraulic TwineWrap.

528.00



280.00



779.00





List PriceSuggested

USD ($)



419.00


Driveline Conversions - To 540 RPM from 1000 RPMAE74610 Output Shaft, 540 RPM

For 4' wide models. For 5, 6, 7, and 8 series machines.If a complete PTO shaft (BE31165) is ordered, only a 540 RPM Output Shaft (AE74610) isrequired to complete the conversion.

271.38






98.02


109.66


86.64



484.00


1,747.90





List PriceSuggested

USD ($)





327.80






538.47




1,590.60




45.70


91.30





List PriceSuggested

USD ($)







91.30


117.70


92.40


173.80


185.90


374.00







List PriceSuggested

USD ($)



38.99


142.49



4,249.30


Balers with Factory equipped BaleTrak Pro or BaleTrak Plus monitors ONLY.Spanish or French Operator Manual and Decal Kit must be ordered separately.

7,723.10


438.90




46.1 In. (1171 mm) Wide Up to 60 In. (1524 mm)Diameter Bale Weighing up to 1100 Lbs. (499 kg) Six7 In. (178mm) Wide, DiamondTough Triple Weave BeltsDiamond Tread Friction Surface Belts Mato, PlateType Belt Splices Regular Pickup: 45.9 In. (1.2 M),Inside 55.5 In. (1.4 M), Flare to Flare RollerChain with V-Belt Drive Four-Bar Pickup Reel, 72Teeth Adjustable Hay Compressors Adjustable HeightControl Side Flare Crop Guides Constant Velocity540 RPM PTO Tractor Hookup - Cat. 4, LockbackCollar, Slip Clutch Protected Fixed HydraulicDensity Control Large Feed Opening Powered RoundbarStarter Roll Staggered Belt Roll Bearing ProtectorsDouble Electric Twine Arms Visual Twine MovementIndicators Six Ball Twine Storage 14L x 16.1, 8PRHi Flotation Tires Adjustable Wheel Spindles ScrewType Jack Mechanical Bale Size Indicator HingedShields Hydraulic Gate Lockout Flashing WarningLights with Turning Signal 10,000 Lb. (45 kN)Safety Chain BaleTrak Pro Monitor/Controller: (LessMounting Brackets) Monitor Functions: GateClosed-Ready Bale Shape Indicators Near Full SizeAlert Full Bale Alarm Bale Full Size-Wrap StartedOversize Bale Alert Gate Partially Open DisplayBale Size Out of Net Net Cutoff Selection of Twine

or Net On Board Diagnostics Bale Counter LowVoltage Indicator Bale Size Calibration DisplayError Codes Manual Actuator Movement withElectronic Bypass Controller Functions: Net orTwine Application Auto Wrap Cycle Control of BaleSize Control of Twine Spacing/Net Wraps Number ofEnd Wraps End Wrap Location Control of Soft Core(Connects to Tractor 3-Terminal Convenience Outlet)One Tractor Selective Control Valve is requiredwhen baler is equipped with BaleTrak Pro orBaleTrak Plus Monitor/Controller. Two TractorSelective Control Valves are required when baler isequipped with BaleTrak Pro or BaleTrak PlusMonitor/Controller and Hydraulic Pickup Lift. Fortractors not equipped with a convenience outlet,order AE50549, 3-Terminal Convenience Outlet WiringHarness from Parts, see Attachments for FieldConversion.


List PriceSuggested

USD ($)



DESTINATION





Same Price


Same Price


450M Dry Hay Baler Configuration1.8M MegaWide Plus PickupCOMMON, ADJUSTABLE CLEVISSLIP CLUTCH ALERT

In Base Price





List PriceSuggested

USD ($)

BALER CONFIGURATION ...Continued...Bale Trac Pro DisplayMegaWide Plus RotorMegaWide Plus Baffle and Compression RackTWINE

0502 SILAGE Baler Configuration450M Silage Baler Configuration4X5 MAIN FRAME BASE/SILAGEAUGER, 450 SILAGE PARTSTONGUE, COMMON, ADJUSTABLE CLEVISBale Trac Pro DisplaySILAGE IDENTIFIER DECALSSLIP CLUTCH ALERT

2,195.00


450M PR Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1010 540 Slip Clutch3. 2020 14L x 16.1, 8PR, Hi-Flo Tires4. 3020 Wide Pickup5. 5500 CoverEdge Surface Wrap with Twine

In Configuration

0951 0951 Round Baler Package450M PR 0951 Round Baler Package1. 0502 SILAGE Baler Configuration2. 1010 540 Slip Clutch3. 2020 14L x 16.1, 8PR, Hi-Flo Tires4. 3020 Wide Pickup5. 5500 CoverEdge Surface Wrap with Twine

In Configuration


With Cam ClutchWith Slip Clutch

In Base Price


Same Price

WRAPPING SYSTEM




PICKUP3020 MegaWidePlus Pickup 4,231.00





List PriceSuggested

USD ($)

PICKUP ...Continued...With Slip-Clutch Alert and CompensationIncludes Pickup Gauge Wheels, Right and Left.Includes Pickup Gauge Wheels, Right and Left.


4,231.00



76.00

PICKUP9001 Hydraulic Pickup Lift with Down Stop

Balers with MegaWidePlus Pickup ONLY.Requires tractor equipped with two Selective Control Valve Functions.Balers with MegaWidePlus Pickup ONLY.1) Requires tractor equipped with two Selective Control Valve Functions,OR2) Requires three Tractor Selective Control Valve Functions if baler has Hydraulic TwineWrap.

528.00



419.00




98.02






List PriceSuggested

USD ($)


TWINE WRAPBE24158 Adjustable Twine Guide 149.60



438.90




46.1 In. (1171mm) Wide up to 60 In. Diameter BaleWeighing up to 1000 Lbs. (454 kg) Six 7 In. (178mm) Wide, DiamondTough Triple Weave Belts, DiamondTread Friction Surface Belts, Mato Plate-Type BeltSplices Regular Pickup: 45.9 In. (1.2 M), Inside55.5 In. (1.4 M), Flare to Flare Roller Chain withV-Belt Drive Four-Bar Pickup Reel, 72 TeethAdjustable Height Control Adjustable Contoured HayCompressors Side Flare Crop Guides ConstantVelocity 540 RPM PTO Tractor Hookup, LockbackCollar, Shearbolt Protected Adjustable Clevis HitchDouble Electric Twine Fixed Hydraulic Density LargeFeed Opening Powered Roundbar Starter RollStaggered Belt Roll Single Roll of Net- Noadditional net storage 11L-14 Tires Fixed WheelSpindles Screw Type Jack Audible Alert for NearFull, Full Bale Size, and Oversize Bale HingedShields Mechanical Gate Lockout Flashing WarningLights with Turning Signal 10,000 Lbs. (45 kN)Safety Chain Bale-Trak Pro Monitor/Controller:

(Less Mounting Brackets) (Connects to Tractor3-Terminal Convenience Outlet) Monitor Functions:Gate Latched-Ready Near Full Size Alert Full BaleAlarm Bale Full Size-Wrap Started Oversize BaleAlert Gate Partially Open-Stop Display Bale SizeOut of Net Net Cutoff On Board Diagnostics BaleCounter Low Voltage Indicator Display Error CodesController Functions: Auto Wrap Cycle Adjust BaleSize Number of Wraps Control of Soft Core ForTractors not Equipped with a Convenience Outlet,Orer AE50549 3 Terminal Convenience Outlet WiringHarness from Parts. To AdaptAudible Alert to 2Terminal Tractor Convennce Outlet, Order AA37254Harness through Parts


List PriceSuggested

USD ($)


BASE MACHINE2310E 450E Round Baler 27,070.00

DESTINATION





Same Price


Same Price


Same Price


Same Price

BALER CONFIGURATION


450E Round BalerEquipment for Base Machine



List PriceSuggested

USD ($)

BALER CONFIGURATION ...Continued...0501 Dry Hay Baler Configuration

450E Dry Hay Baler ConfigurationIn Base Price


450E 0901 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 5050 Electric Double Twine System

In Configuration

0902 0902 Round Baler Package450E 0902 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 5055 Edge to Edge Netwrap System

In Configuration

WRAPPING SYSTEM

Surface Wrap5055 Edge-to-Edge Surface Wrap, Less Twine

Offers MOST of same features as BaleTrak Pro for other twine balers. Key EXCEPTION isbale shape indication.To order Mounting Parts, see Notes in Attachments for Field Conversion Section.

In Base Price

Twine Wrap5050 Auto Electric Double Twine Wrap with BaleTrak Pro Monitor (Control Monitor Mounting

Brackets Are Not IncludedOffers MOST of same features as BaleTrak Pro for other twine balers. Key EXCEPTION isbale shape indication.To order Mounting Parts, see Notes in Attachments for Field Conversion Section.

-3,312.00



1,526.00



76.00


76.00


84.00

9010 BaleTrak Pro Monitor LESS Mounting Brackets (Order if Second Monitor is Desired)1) Connects to Tractor 3-Terminal Convenience Outlet. For tractors not equipped with a

1,473.00


450E Round BalerContinued



List PriceSuggested

USD ($)

DISPLAYS ...Continued...Convenience Outlet, order AE50549, 3-Terminal Convenience Outlet Wiring Harness fromParts.2) See Attachments for Field Conversion section to order Mounting Brackets.





419.00


Bale EjectionBE32453 Take Up Arms

Standard and PR Round Balers.319.00

Bale RampBE32285 Bale Ramp

Compatible with 459 Standard Round Baler.Requires 2200 PSI Tractor Hydraulics.Order BE32453 - Auxiliary Take Up Arms if ordered as field installed attachment.

1,717.10

DENSITY CONTROLBE24159 Variable Core Valve 460.90






98.02


109.66





List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...AE50531 Harness, Convenience Outlet

For adapting "5" and "6" Series monitors/displays/controllers with 2-Terminal maleconnectors to 3-Terminal female tractor convenience outlet.

86.64




327.80






538.47


Monitors/Displays/ControllersAM3118E Bale Counter

Only the bale counter. To order the full kit, order BE22696.24.51

BE30007 BaleTrak Pro Monitor LESS Mounting Brackets(Order if Second Monitor is Desired)1) Connects to Tractor 3-Terminal Convenience Outlet. For tractors not equipped with aConvenience Outlet, order AE50549, 3-Terminal Convenience Outlet Wiring Harness fromParts.2) See Attachments for Field Conversion section to order Mounting Brackets.

1,590.60




45.70


91.30





List PriceSuggested

USD ($)







91.30


117.70


92.40


173.80


185.90




38.99


142.49





List PriceSuggested

USD ($)



Balers with Regular Pickup ONLY.1) Requires tractor equipped with two Selective Control Valve Functions,OR2) Requires three Tractor Selective Control Valve Functions if baler has Hydraulic TwineWrap.

580.80

Service ToolsAE43296 Lacer Vise for Extra Service Life Belt Fasteners 212.59




46.1 In. (1171mm) Wide up to 60 In. Diameter BaleWeighing up to 1000 Lbs. (454 kg) Six 7 In. (178mm) Wide, DiamondTough Triple Weave Belts, DiamondTread Friction Surface Belts, Mato Plate-Type BeltSplices Regular Pickup: 45.9 In. (1.2 M), Inside55.5 In. (1.4 M), Flare to Flare Roller Chain withV-Belt Drive Four-Bar Pickup Reel, 72 TeethAdjustable Height Control Adjustable Contoured HayCompressors Side Flare Crop Guides ConstantVelocity 540 RPM PTO Tractor Hookup, LockbackCollar, Shearbolt Protected Adjustable Clevis HitchDouble Electric Twine Fixed Hydraulic Density LargeFeed Opening Powered Roundbar Starter RollStaggered Belt Roll Single Roll of Net- Noadditional net storage 11L-14 Tires Fixed WheelSpindles Screw Type Jack Audible Alert for NearFull, Full Bale Size, and Oversize Bale HingedShields Mechanical Gate Lockout Flashing WarningLights with Turning Signal 10,000 Lbs. (45 kN)Safety Chain Bale-Trak Pro Monitor/Controller:

(Less Mounting Brackets) (Connects to Tractor3-Terminal Convenience Outlet) Monitor Functions:Gate Latched-Ready Near Full Size Alert Full BaleAlarm Bale Full Size-Wrap Started Oversize BaleAlert Gate Partially Open-Stop Display Bale SizeOut of Net Net Cutoff On Board Diagnostics BaleCounter Low Voltage Indicator Display Error CodesController Functions: Auto Wrap Cycle Adjust BaleSize Number of Wraps Control of Soft Core ForTractors not Equipped with a Convenience Outlet,Orer AE50549 3 Terminal Convenience Outlet WiringHarness from Parts. To AdaptAudible Alert to 2Terminal Tractor Convennce Outlet, Order AA37254Harness through Parts


List PriceSuggested

USD ($)


BASE MACHINE2311E 450E PR Round Baler 27,070.00

DESTINATION





Same Price


Same Price




450E PR 0950 Round Baler Package1. 0501 DRY HAY Baler Configuration

In Configuration


450E PR Round BalerEquipment for Base Machine



List PriceSuggested

USD ($)

PACKAGE CONFIGURATIONS ...Continued...2. 5055 Edge to Edge Netwrap System

WRAPPING SYSTEM

Surface Wrap5055 Edge-to-Edge Surface Wrap, Less Twine

Offers MOST of same features as BaleTrak Pro for other twine balers. Key EXCEPTION isbale shape indication.To order Mounting Parts, see Notes in Attachments for Field Conversion Section.

In Base Price



1,526.00


Series Cab Tractors76.00




Bale EjectionBE32453 Take Up Arms

Standard and PR Round Balers.319.00

Bale RampBE32285 Bale Ramp

Compatible with 459 Standard Round Baler.Requires 2200 PSI Tractor Hydraulics.Order BE32453 - Auxiliary Take Up Arms if ordered as field installed attachment.

1,717.10



98.02



450E PR Round BalerContinued


46.1 In. (1171 mm) Wide up to 48 In. (1295 mm)Diameter Bale Weighing up to 750 Lbs. (340 kg) Six7 in. (178 mm) Wide, DiamondTough Triple WeaveBelts, Diamond Tread Friction Surface Belts, MatoPlate-Type Belt Splices, V-Belt Drive Four-BarPickup Reel, 72 Teeth Adjustable Height ControlAdjustable Contoured Hay Compressors Side FlareCrop Guides Constant Velocity 540 RPM PTO TractorHookup - Cat. 4, Lockback Collar, ShearboltProtected Fixed Hydraulic Density Control LargeFeed Opening Powered Round Bar Starter RollStaggered Belt Roll Bearing Protectors HydraulicDouble Twine Wrap Five Ball Twine Storage 9.5L-14,6PR Tires Adjustable Wheel Spindles Screw Type JackMechanical Bale Size Indicator Audible Alert forNear Full, Audible alert for Oversize Bale HingedShields Mechanical Gate Lockout Flashing WarningLights with Turning Signal 10,000 Lb. (45 kN)Safety Chain One Tractor Selective Control Valve is

required when baler is equipped with Electric TwineWrap. Two Tractor Selective Control Valves arerequired when baler is equipped with HydraulicTwine Wrap. Three Tractor Selective Control Valvesare required when baler is equipped with HydraulicTwine Wrap and Hydraulic Pickup Lift. For tractorsnot equipped with a Convenience Outlet, orderAE50549, 3-Terminal Convenience Outlet WiringHarness from Parts. To adapt Audible Alert to 2Terminal Tractor Convenience Outlet, order AA37254,Harness Wiring from Parts, see Attachments forField Conversion.


List PriceSuggested

USD ($)


BASE MACHINE2300E 440E Round Baler 22,634.00

DESTINATION





Same Price


Same Price


Same Price


Same Price




440E Round BalerEquipment for Base Machine



List PriceSuggested

USD ($)


440E 0901 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1000 540 RPM PTO Hookup with Shearbolt3. 2010 11L x 144. 3000 Regular Pickup5. 5010 Hydraulic Double Twine Wrap

In Configuration

0902 0902 Round Baler Package440E 0902 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1010 540 RPM PTO Hookup with Slip Clutch3. 2010 11L x 144. 3000 Regular Pickup5. 5040 Electric Double Twine System

In Configuration

0903 0903 Round Baler Package440E 0903 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1010 540 RPM PTO Hookup with Slip Clutch3. 2020 14L x 16.1, 8PR, Hi-Flotation Tires4. 3020 Wide Pickup5. 5040 Electric Double Twine System

In Configuration

0904 0904 Round Baler Package440E 0904 Round Baler Package1. 0501 DRY HAY Baler Configuration2. 1010 540 RPM PTO Hookup with Slip Clutch3. 2020 14L x 16.1, 8PR, Hi-Flotation Tires4. 3020 Wide Pickup5. 5010 Hydraulic Double Twine Wrap

In Configuration


With Slip Clutch428.00

1000 540 rpm Power Take-Off (PTO) Hookup with Shearbolt In Base Price

WRAPPING SYSTEM

Twine Wrap5010 Hydraulic Double Twine Wrap In Base Price

5040 Electric Double Twine Wrap with BaleTrak Pro Monitor (Control Monitor Mounting BracketsAre Not Included)Offers MOST of same features as BaleTrak Pro for other twine balers. Two key EXCEPTIONSare bale shape indication and soft core control.To order Mounting Parts, see Notes in Attachments for Field Conversion Section.

1,409.00

WHEELS AND TIRES2020 14L x 16.1 in., 8 PR HiFlow tires 1,009.00

2010 11L - 14 in., 8 PR Tires In Base Price

PICKUP





List PriceSuggested

USD ($)

PICKUP ...Continued...3000 Regular Pickup


In Base Price


4,056.00



1,250.00



136.00

BALE COUNTERS9007 Bale Counter

Full kit includes bale counter and hardware to mount counter.59.00




528.00

9000 Hydraulic Pickup Lift with Down StopBalers with Regular Pickup ONLY. Requires tractor equipped with two Selective Control ValveFunctions.Balers with Regular Pickup ONLY.1) Requires tractor equipped with two Selective Control Valve Functions,OR2) Requires three Tractor Selective Control Valve Functions if baler has Hydraulic TwineWrap.

528.00



779.00





List PriceSuggested

USD ($)

HIGH MOISTURE KITS ...Continued...

SIDE-SHEET ENHANCEMENTS9050 Bale Shape Indicator

BE32676 BALE SHAPE INDICATOR375.00


DISPLAYSBE23599 Mounting Brackets for Monitor or Display Controller - John Deere Sound-Gard Body Cab

TractorsFor mounting BaleTrak Pro monitor to John Deere tractors with Sound-Gard Body cab.

83.60

BE23519 Mounting Brackets for Monitor or Display or Controller - 5020, 5025, 6000, 7000, or 8000Series Cab TractorsFor mounting BaleTrak Pro monitor to 5020, 5025, 6000, 6005, 6010, 6015, 6020, 7000, 7010,7020, or 8000 Series Cab Tractors.

83.60






98.02


109.66


86.64








List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...RE63147 Drawbar Drop-Down Kit

For 7000 Series John Deere Tractors - 2 In. Drop.Not compatible with Hi-Crop models.

327.80






538.47


Monitors/Displays/ControllersAM3118E Bale Counter

Only the bale counter. To order the full kit, order BE22696.24.51

BE30007 BaleTrak Pro Monitor LESS Mounting Brackets(Order if Second Monitor is Desired)1) Connects to Tractor 3-Terminal Convenience Outlet. For tractors not equipped with aConvenience Outlet, order AE50549, 3-Terminal Convenience Outlet Wiring Harness fromParts.2) See Attachments for Field Conversion section to order Mounting Brackets.

1,590.60




45.70


91.30





List PriceSuggested

USD ($)







91.30


117.70


92.40


173.80


185.90




38.99


142.49





List PriceSuggested

USD ($)


Service ToolsAE43296 Lacer Vise for Extra Service Life Belt Fasteners 212.59




FrameFull Frame design with independant bale chamber

FeedingPick Up2,2m (2,12m DIN) Premium pick upStainless steel strippersCamtrack driven pickup5 tine bars with central spider and ball bearings6mm tinesWindrow compressor roll and compressing rodsHydraulic pick up liftAdjustable down stop and floating

High Capacity (HC) feeding systemHC Premium rotor with converging augers on rotoraxle3 Hardox® wear plate rotor tines per turnFull width + parallel kinematic drop floorDrop floor controlled from the cab

Bale chamberAdjustable bale diameter from 0,8m to 1.60m -set-up from the monitorBale chamber width: 1.21m2 front driven rolls + 1 driven starter roll2 x 576 mm width endless belts2 rubber coated driving rollsAdjustable bale density from monitorHydraulic pressure gauge on monitorSoftcore pressure and diameter fully adjustablefrom monitorCleaning rollers for wet conditionsGreasable bearings1-1/4" Diamonds H bale chamber & feeder rotorsdrive chainsAutomatic chain lubrication (volumetric pump)Fast Release System - Bale unloadingMovable side sheets to release bales w/o contactFast and light tailgate

Rear protective curtainNet wrapping systemNet tying system in front of the machineSelf adjusting net roll brakeLoading tray3 net rolls as loading capacityCompatible with CoverEdge and Edge to Edge net2 plastic stops for non CoverEdge net rollsAll settings from displayElectrical systemISOBUS balerMonitor support not includedTractor Baler Automation function activated(compatible with John Deere tractors only - seedetails below)TransmissionCasted gearbox with crossbeam designCamclutch safetyPTO with wide angle, free rotation and 50hlubrication intervalAxleStraight axleAttachingAdjustable tongue for lower or upper positionhitch (turnbuckles)2 gears jackstandTractor requirementMinimum tractor HP = 100 hp (no knife - knives notengaged)Minimum tractor HP = 110 hp (13 knives engaged)Minimum tractor HP = 120 hp (25 knives engaged)1 Double acting SCV is required for tailgate1 Double acting SCV is required for the pickup


List PriceSuggested

USD ($)


BASE MACHINE0921C V451R RotoFlow HC Premium/MaxiCut HC 13 Premium Variable Chamber round Baler 74,714.00

DESTINATION0184 Canada Same Price

0202 USA In Base Price

OPERATOR'S MANUAL0409 English In Base Price

0413 French Same Price


V451R RotoFlow HC Premium/MaxiCut HC 13 Premium Variable Chamber round BalerEquipment for Base Machine



List PriceSuggested

USD ($)

SHIPPING PREPARATION7703 Ro-Ro shipment In Base Price

ROTOR1040 MaxiCut HC 13 Premium

13 knives - 80mm space between knives0/13 knives activated from monitorKnives individually spring loadedKnives double heat treated

In Base Price

GAUGE WHEELS1082 Standard (fixed) gauge wheels In Base Price

1083 Caster action (pivoting) gauge wheels 470.00

TYING SYSTEM1430 Net tying only

Net system on baler tailgate3 net rolls loading capacityCompatible with CoverEdge and Edge to Edge netAll settings from display2 plastic stops for non CoverEdge net rolls

In Base Price

1470 Net + Twine tyingNet system on baler tailgate3 net rolls loading capacityCompatible with CoverEdge and Edge to Edge netAll settings from display2 plastic stops for non CoverEdge net rolls2 twine arms systemFully adjustable from display10 twine coils capacity (5 on each baler side)

2,022.00

POWER TAKE-OFF (PTO) DRIVELINE1000 RPM PTO advised for optimized baler capacity/productivity (136 kW capacity vs 124kW)

3513 540 RPM transmission / 124 KW (168 Hp)/ Cam clutch/ 6 Splines tractor side In Base Price

3542 1000 RPM transmission / 136 KW (185Hp) / Cam clutch/ 21 Splines tractor side Same Price

DISPLAYS7308 Greenstar Display 1800

Delivered with cab harness (requires 12V COBO plug) AND corner post harness (allowing toplug monitor to John Deere corner cab plug)Baler can be directly plugged to ISOBUS tractor18 cm diagonal color screenGreenstar Display 1800 providing functions on top of Implement Display 1100 :- Tractor Baler Automation capability- John Deere guidance system capacities (through AMS/fFarmsight options)

In Base Price

7309 No monitor delivered with balerBaler MUST be directly plugged to ISOBUS tractor

-1,850.00


V451R RotoFlow HC Premium/MaxiCut HC 13 Premium Variable Chamber round BalerContinued



List PriceSuggested

USD ($)

DISPLAYS ...Continued...Similar information than Implement 7306 option code (Implement Display 1100) displayed.Tractor Baler Automation capacity if teamed with compatible John Deere tractor.

WHEELS AND TIRES3025 16/70-20 tires

2,55m overall baler width420 mm width1080 mm diameter

In Base Price

3026 500/55-20 tires2.72m overall baler width508mm width1060mm diameter

826.00

3034 520/55R22.5 tires2.72m overall baler width515mm width1155mm diameter

2,382.00

3029 600/50-22.5 tires2.92m overall baler width605mm width1170mm diameter

2,890.00

BRAKING SYSTEM7022 No brakes

Up to 40 KM/H (need to follow local regulation)In Base Price

HITCHESTo improve turning radius (reduce interference PTO transmission/ baler's tongue):Angled hitch is recommended when the baler tongue is in upper position (tractor wagon hitch)Straight hitch is recommended when the baler tongue is in lower position (tractor drawbarhitch)

5010 Straight hitch with ball joint33 mm pin diameter

250.00

5070 Clevis hitchFor Canada (0184) and United States (0202) only25 mm pin diameter

In Base Price

SAFETY CHAIN9508 Safety chain

Mandatory for France, Spain, Portugal, Australia, New-Zealand, Russia, Kazakhstan,Belarus, USA, Canada (0136 / 0163 / 0157 / 0230 / 0237 / 0096 / 0081/ 0125 / 0202 / 0184 )

81.00

ROAD LIGHTING7806 Road lighting for NA

For Canada (0184) and United States (0202) only598.00





List PriceSuggested

USD ($)

ROAD LIGHTING ...Continued...

GREASING1580 Manual greasing - centralized greasing banks In Base Price

1582 Automatic greasing - Tank system1200g grease tank capacity - filling through traditional zerk or fast filling systemGreasing lentgh and interval fully adjusted from the monitorTank level message on monitor

1,651.00

KNIFE SLOT FILLERSAvoid to fill knives slots with stones and dust when not cutting (precutter knives retracted).Requires to remove precutter knives before to install

8101 Knife slot fillers for MaxiCut HC13 Premium 212.00

B-WRAP8167 B-Wrap tying system

For dry crops (straw, hay...)Protect bales stored outside from rain and snow.Uses net tying system components.Settings from monitor

In Configuration

BALE EJECTION8160 Bale unloading ramp

Avoid the bale to stay under the tailgate while closing the chamberMANDATORY to run baler with Tractor Baler Automation mode

713.00

BRACKETS9732 Monitor bracket - for John Deere 6000/7000/6R/7R tractors 167.00

9733 Monitor bracket - all tractors except John Deere 6000/7000/6R/7R 167.00

HARNESSES9748 Battery wiring harness

For tractors without 3 pin power outlet294.00

CHOCK BLOCKS8300 Wheel chocks 127.00

MISCELLANEOUS8660 Tool box

Located on front of the balerCan be removed

154.00

8162 Fire extinguisher 133.00





List PriceSuggested

USD ($)

MISCELLANEOUS ...Continued...Non homologated deviceWater pressurized tank10 liters

MISCELLANEOUS9055 Parts catalog No Charge




FrameFull Frame design with independant bale chamber

FeedingPick Up2,2m (2,12m DIN) Premium pick upStainless steel strippersCamtrack driven pickup5 tine bars with central spider and ball bearings6mm tinesWindrow compressor roll and compressing rodsHydraulic pick up liftAdjustable down stop and floating

High Capacity (HC) feeding systemHC Premium rotor with converging augers on rotoraxle3 Hardox® wear plate rotor tines per turnFull width + parallel kinematic drop floorDrop floor controlled from the cab

Bale chamberAdjustable bale diameter from 0,8m to 1.85m -set-up from the monitorBale chamber width: 1.21m2 front driven rolls + 1 driven starter roll2 x 576 mm width endless belts2 rubber coated driving rollsAdjustable bale density from monitorHydraulic pressure gauge on monitorSoftcore pressure and diameter fully adjustablefrom monitorCleaning rollers for wet conditionsGreasable bearings1-1/4" Diamonds H bale chamber & feeder rotorsdrive chainsAutomatic chain lubrication (volumetric pump)Fast Release System - Bale unloadingMovable side sheets to release bales w/o contactFast and light tailgate

Rear protective curtainNet wrapping systemNet tying system in front of the machineSelf adjusting net roll brakeLoading tray3 net rolls as loading capacityCompatible with CoverEdge and Edge to Edge net2 plastic stops for non CoverEdge net rollsAll settings from displayElectrical systemISOBUS balerMonitor support not includedTractor Baler Automation function activated(compatible with John Deere tractors only - seedetails below)TransmissionCasted gearbox with crossbeam designCamclutch safetyPTO with wide angle, free rotation and 50hlubrication intervalAxleStraight axleAttachingAdjustable tongue for lower or upper position hitch(turnbuckles)2 gears jackstandTractor requirementsMinimum tractor HP = 100 hp (no knife - knives notengaged)Minimum tractor HP = 110 hp (13 knives engaged)Minimum tractor HP = 120 hp (25 knives engaged)1 Double acting SCV is required for tailgate1 Double acting SCV is required for the pickup


List PriceSuggested

USD ($)


BASE MACHINE0951C V461R RotoFlow HC Premium/MaxiCut HC 13 Premium Variable Chamber round Baler 81,308.00






V461R RotoFlow HC Premium/MaxiCut HC 13 Premium Variable Chamber round BalerEquipment for Base Machine



List PriceSuggested

USD ($)

SHIPPING PREPARATION7703 Ro-Ro shipment In Base Price

ROTOR1040 MaxiCut HC 13 Premium

13 knives - 80mm space between knives0/13 knives activated from monitorKnives individually spring loadedKnives double heat treated

In Base Price





In Base Price


2,022.00

POWER TAKE-OFF (PTO) DRIVELINE1000 RPM PTO advised for optimized baler capacity/productivity (136 kW capacity vs 124kW)

3513 540 RPM transmission / 124 KW (168 Hp)/ Cam clutch/ 6 Splines tractor side In Base Price

3542 1000 RPM transmission / 136 KW (185Hp) / Cam clutch/ 21 Splines tractor side Same Price



In Base Price

7309 No monitor delivered with balerBaler MUST be directly plugged to ISOBUS tractor

-1,850.00





List PriceSuggested

USD ($)

DISPLAYS ...Continued...Similar information than Implement 7306 option code (Implement Display 1100) displayed.Tractor Baler Automation capacity if teamed with compatible John Deere tractor.



In Base Price

3026 500/55-20 tires2.72m overall baler width508mm width1060mm diameter

826.00


2,382.00


2,890.00





250.00

5070 Clevis hitchFor Canada (0184) and United States (0202) only25 mm pin diameter

In Base Price


Mandatory for France, Spain, Portugal, Australia, New-Zealand, Russia, Kazakhstan,Belarus, USA, Canada (0136 / 0163 / 0157 / 0230 / 0237 / 0096 / 0081/ 0125 / 0202 / 0184 )

81.00







List PriceSuggested

USD ($)

ROAD LIGHTING ...Continued...


1582 Automatic greasing - Tank system1200g grease tank capacity - filling through traditional zerk or fast filling systemGreasing lentgh and interval fully adjusted from the monitorTank level message on monitor

1,651.00

KNIFE SLOT FILLERSAvoid to fill knives slots with stones and dust when not cutting (precutter knives retracted).Requires to remove precutter knives before to install

8101 Knife slot fillers for MaxiCut HC13 Premium 212.00



In Configuration



713.00








154.00

8162 Fire extinguisher 133.00





List PriceSuggested

USD ($)

MISCELLANEOUS ...Continued...Non homologated deviceWater pressurized tank10 liters





FrameFull Frame design with independent bale chamberFeedingPick Up2,2m (2,12m DIN) Premium pick upStainless steel strippersCamtrack driven pickup5 tines bars with central spider and ball bearings6mm tinesWindrow compressor roll and compressing rodsHydraulic pick up liftAdjustable down stop and floatingHigh Capacity (HC) feeding systemHC Premium rotor with converging augers on rotoraxle3 Hardox® wear plate rotor tines per turn25 knives - 40mm space between knives0/12/13/25 knives activated from monitor (2independant sets)Knives individually spring loadedKnives double heat treatedFull width + parallel kinematic drop floorDrop floor controlled from the cabBale chamberAdjustable bale diameter from 0,8m to 1.60m -set-up from the monitorBale chamber width: 1.21m2 front driven rolls + 1 driven starter roll2 x 576 mm width endless belts2 rubber coated driving rollsAdjustable bale density from monitorHydraulic pressure gauge on monitorSoftcore pressure and diameter fully adjustablefrom monitorCleaning rollers for wet conditionsGreasable bearings1-1/4" Diamonds H bale chamber & feeder rotorsdrive chainsAutomatic chains lubrication (volumetric pump)Fast Release System - Bale unloadingMovable side sheets to release bales w/o contact

Fast and light tailgateRear protective curtainNet wrapping systemNet tying system in front of the machineSelf adjusting net roll brakeLoading tray3 net rolls as loading capacityCompatible with CoverEdge and Edge to Edge net2 plastic stops for non CoverEdge net rollsAll settings from displayElectrical systemISOBUS balerMonitor support not includedTractor Baler Automation function activated(compatible with John Deere tractors only - seedetails below)Transmission1000 RPM casted gearbox with crossbeam designCamclutch safetyPTO with wide angle, free rotation and 50hlubrication intervalAxleStraight axleAttachingAdjustable tongue for lower or upper positionhitch (turnbuckles)2 gears jackstandTractor requirementMinimum tractor HP = 100 hp (no knife - knives notengaged)Minimum tractor HP = 110 hp (13 knives engaged)Minimum tractor HP = 120 hp (25 knives engaged)1 Double acting SCV is required for tailgate1 Double acting SCV is required for the pickup


List PriceSuggested

USD ($)


BASE MACHINE0922C V451R MaxiCut HC 25 Premium Variable Chamber round Baler 79,041.00





SHIPPING PREPARATION


V451R MaxiCut HC 25 Premium Variable Chamber round BalerEquipment for Base Machine



List PriceSuggested

USD ($)

SHIPPING PREPARATION ...Continued...7703 Ro-Ro shipment In Base Price





In Base Price


2,022.00

POWER TAKE-OFF (PTO) DRIVELINE3541 1000 RPM transmission / 136 KW(185 Hp) / Cam clutch/ 6 Splines tractor side Same Price

3542 1000 RPM transmission / 136 KW (185Hp) / Cam clutch/ 21 Splines tractor side In Base Price



In Base Price

7309 No monitor delivered with balerBaler MUST be directly plugged to ISOBUS tractorSimilar information than Implement 7306 option code (Implement Display 1100) displayed.Tractor Baler Automation capacity if teamed with compatible John Deere tractor.

-1,850.00



In Base Price

3026 500/55-20 tires2.72m overall baler width508mm width

826.00


V451R MaxiCut HC 25 Premium Variable Chamber round BalerContinued



List PriceSuggested

USD ($)

WHEELS AND TIRES ...Continued...1060mm diameter


2,382.00


2,890.00





250.00

5070 Clevis hitch25 mm pin diameterFor Canada (0184) and United States (0202) only

In Base Price


Mandatory for France, Spain, Portugal, Australia, New-Zealand, Russia, Kazakhstan, Belarus,Canada, US (0136 / 0163 / 0157 / 0230 / 0237 / 0096 / 0081 / 0125 / 0184 / 0202)

81.00




1582 Automatic greasing - Tank system1200g grease tank capacity - filling through traditional zerk or fast filling systemGreasing length and interval fully adjusted from the monitorTank level message on monitor

1,651.00

KNIFE SLOT FILLERS





List PriceSuggested

USD ($)

KNIFE SLOT FILLERS ...Continued...Avoid to fill knives slots with stones and dust when not cutting (precutter knives retracted).Requires to remove precutter knives before to install

8100 Knives slot fillers for MaxiCut HC25 Premium 404.00



In Configuration



713.00








154.00

8162 Fire extinguisherNon homologated deviceWater pressurized tank10 liters

133.00





FrameFull Frame design with independent bale chamberFeedingPick Up2,2m (2,12m DIN) Premium pick upStainless steel strippersCamtrack driven pickup5 tines bars with central spider and ball bearings6mm tinesWindrow compressor roll and compressing rodsHydraulic pick up liftAdjustable down stop and floatingHigh Capacity (HC) feeding systemHC Premium rotor with converging augers on rotoraxle3 Hardox® wear plate rotor tines per turn25 knives - 40mm space between knives0/12/13/25 knives activated from monitor (2independant sets)Knives individually spring loadedKnives double heat treatedFull width + parallel kinematic drop floorDrop floor controlled from the cabBale chamberAdjustable bale diameter from 0,8m to 1.85m -set-up from the monitorBale chamber width: 1.21m2 front driven rolls + 1 driven starter roll2 x 576 mm width endless belts2 rubber coated driving rollsAdjustable bale density from monitorHydraulic pressure gauge on monitorSoftcore pressure and diameter fully adjustablefrom monitorCleaning rollers for wet conditionsGreasable bearings1-1/4" Diamonds H bale chamber & feeder rotorsdrive chainsAutomatic chains lubrication (volumetric pump)Fast Release System - Bale unloadingMovable side sheets to release bales w/o contact

Fast and light tailgateRear protective curtainNet wrapping systemNet tying system in front of the machineSelf adjusting net roll brakeLoading tray3 net rolls as loading capacityCompatible with CoverEdge and Edge to Edge net2 plastic stops for non CoverEdge net rollsAll settings from displayElectrical systemISOBUS balerMonitor support not includedTractor Baler Automation function activated(compatible with John Deere tractors only - seedetails below)Transmission1000 RPM casted gearbox with crossbeam designCamclutch safetyPTO with wide angle, free rotation and 50hlubrication intervalAxleStraight axleAttachingAdjustable tongue for lower or upper position hitch(turnbuckles)2 gears jackstandTractor requirementsMinimum tractor HP = 100 hp (no knife - knives notengaged)Minimum tractor HP = 110 hp (13 knives engaged)Minimum tractor HP = 120 hp (25 knives engaged)1 Double acting SCV is required for tailgate1 Double acting SCV is required for the pickup


List PriceSuggested

USD ($)


BASE MACHINE0952C V461R MaxiCut HC 25 Premium Variable Chamber round Baler 87,695.00





SHIPPING PREPARATION


V461R MaxiCut HC 25 Premium Variable Chamber round BalerEquipment for Base Machine



List PriceSuggested

USD ($)

SHIPPING PREPARATION ...Continued...7703 Ro-Ro shipment In Base Price





In Base Price


2,022.00

POWER TAKE-OFF (PTO) DRIVELINE3541 1000 RPM transmission / 136 KW(185 Hp) / Cam clutch/ 6 Splines tractor side Same Price

3542 1000 RPM transmission / 136 KW (185Hp) / Cam clutch/ 21 Splines tractor side In Base Price



In Base Price

7309 No monitor delivered with balerBaler MUST be directly plugged to ISOBUS tractorSimilar information than Implement 7306 option code (Implement Display 1100) displayed.Tractor Baler Automation capacity if teamed with compatible John Deere tractor.

-1,850.00



In Base Price

3026 500/55-20 tires2.72m overall baler width508mm width

826.00





List PriceSuggested

USD ($)

WHEELS AND TIRES ...Continued...1060mm diameter


2,382.00


2,890.00





250.00

5070 Clevis hitch25 mm pin diameterFor Canada (0184) and United States (0202) only

In Base Price


Mandatory for France, Spain, Portugal, Australia, New-Zealand, Russia, Kazakhstan, Belarus,Canada, US (0136 / 0163 / 0157 / 0230 / 0237 / 0096 / 0081 / 0125 / 0184 / 0202)

81.00




1582 Automatic greasing - Tank system1200g grease tank capacity - filling through traditional zerk or fast filling systemGreasing length and interval fully adjusted from the monitorTank level message on monitor

1,651.00

KNIFE SLOT FILLERS





List PriceSuggested

USD ($)

KNIFE SLOT FILLERS ...Continued...Avoid to fill knives slots with stones and dust when not cutting (precutter knives retracted).Requires to remove precutter knives before to install

8100 Knives slot fillers for MaxiCut HC25 Premium 404.00



In Configuration



713.00








154.00

8162 Fire extinguisherNon homologated deviceWater pressurized tank10 liters

133.00





14 x 18 In. Bale 12 to 50 In. LongRegular Bale Chute74 In. Pickup with 104 Teeth80 Strokes per Minute, 30 In. StrokesCategory 4, Three Joint Heavy Duty

Powershaft with540 RPM PTO Sliding Collar Hookup,Long Tongue, Equal Angle Hitch,and Slip Clutch

Support Bracket for HydraulicHose and PTO Hookup

Pickup CompressorJack

11L-14 In. 6 PR Rib Implement Tireon Left Hand Side

26-12.00 12 In. 4 PR High FlotationTire on Right Hand Side

Plungerhead ExtensionsSafety Chain


List PriceSuggested

USD ($)


BASE MACHINEEX-WORKS Ottumwa, Iowa

6013E 328 Twine Baler 22,633.00

DESTINATION



OPERATOR'S MANUAL AND DECALS0409 English (U.S./ Canada ONLY) In Base Price

0443 English/Spanish (U.S. ONLY)English and Spanish operator manuals and bilingual decals.

Same Price


Same Price

BALE CHUTES2000 Side Drop Bale Chute 379.00

2010 Regular Bale Chute In Base Price

2095 Less Bale Chute -113.00

BALE EJECTION9003 Bale Ejector (Complete), Electric Distance and Tilt Controls (English Decals)

U.S. and Canada Markets.10,296.00

9004 Bale Ejector (Complete), Electric Distance and Hydraulic Tilt Controls Including Cylinder 9,744.00


328 Twine BalerEquipment for Base Machine



List PriceSuggested

USD ($)

BALE EJECTION ...Continued...(English Decals)U.S. and Canada Markets.

9006 Bale Ejector (Complete), Electric Distance and Tilt Controls (No Text Decals)Export Markets Only.

10,296.00

9007 Bale Ejector (Complete), Electric Distance and Hydraulic Tilt Controls Including Cylinder (NoText Decals)Export Markets Only.

9,744.00

DENSITY CONTROL9300 Side Hay Resistor 48.00

9400 Hydraulic Bale Tension 1,563.00

BALE COUNTERS9100 Bale Counter 67.00

WAGON HITCHES9000 Wagon Hitch, Center Telescoping with Bale Chute Extension 735.00

9001 Wagon Hitch, Remote Release 256.00

9005 Wagon Hitch, Center Telescoping with Support 588.00

GAUGE WHEELS9200 Gauge wheel and support 154.00

HYDRAULIC PICKUP LIFT9045 Hydraulic Pickup Lift 536.00

HYDRAULICS9050 Hydraulic Tongue Positioning Cylinder

For Long Tongue only. Not compatible with Short Tongue.429.00

9500 Hydraulic Tongue Positioning BracketFor Long Tongue only. Not compatible with Short Tongue.

129.00

ALLIED SUPPLIER INFORMATIONFOR TWINE CONTACT:

AMBRACOP.O. Box 506Hwy. 61 & 155Dubuque, IA 52001Telephone: (800) 225-8946Fax: (563) 583-3531

FOR BALER'S CHOICE PRESERVATIVE AND PRESERVATIVE APPLICATOR:

Harvest Tec, Inc.


328 Twine BalerContinued



List PriceSuggested

USD ($)

ALLIED SUPPLIER INFORMATION ...Continued...P.O. Box 63Hudson WI 54016Telephone: (715) 386-9100 or (800) 635-7468Fax: (715) 386-9509

Refer to the Agricultural Sales Manual for Additional Information.

ATTACHMENTS FOR FIELD CONVERSION

BALE COUNTERSBE23404 Bale Counter 73.70

BALE EJECTIONBE32066 Bale Ejector (Complete), Electric Distance and Hydraulic Tilt Controls Including Cylinder

(English Decals)U.S. and Canada Markets.

10,718.40

BE32224 Bale Ejector (Complete), Electric Distance and Hydraulic Tilt Controls Including Cylinder (NoText Decals)Export Markets Only.

10,718.40

BE32065 Bale Ejector (Complete), Electric Distance and Tilt Controls (English Decals)U.S. and Canada Markets.

11,325.60

BE32223 Bale Ejector (Complete), Electric Distance and Tilt Controls (No Text Decals)Export Markets Only.

11,325.60

Bale EjectionBE21497 Bale Chute, Regular 137.50

BE21723 Bale Chute, Side Drop with Guide 609.40

BE23854 Bale Ejector, Distance Controls with Hydraulic Cylinder SupportsIncluded in BE32066 Bale Ejector (Complete)Requires BE21036 and BE22060 if ordered separately.

731.50

BE23853 Bale Ejector, Distance and Tilt ControlsIncluded in BE32065 Bale Ejector (Complete)To adapt controls to tractor 3-Terminal Convenience Outlet, order AE50531 Harness,Convenience Outlet from Parts.

1,830.40

BE21036 Bale Ejector, Hydraulic Cylinder for Tilt ControlIncluded in BE32066 Bale Ejector (Complete)

74.80


416.90

BE21502 Bale Ejector, Wheel Extension - Left SideIncluded in BE32065 or BE32066 Bale Ejector (Complete)

410.30

DENSITY CONTROLBE32064 Hydraulic Bale Tension 1,719.30





List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE20120 Side Hay Resistor 52.80

GAUGE WHEELSBE22172 Gauge wheel and support 169.40

HYDRAULIC PICKUP LIFTBE24263 Hydraulic Pickup Lift 589.60

HYDRAULICSBE22078 Hydraulic Tongue Positioning Bracket

For Long Tongue only. Not compatible with Short Tongue.141.90

BE24273 Hydraulic Tongue Positioning CylinderFor Long Tongue only. Not compatible with Short Tongue.

471.90

Hitch and DrawbarBE24261 Safety Chain for Towed Equipment, 20,000 Lb (90 kN) 93.50

BE21895 Wagon Hitch SupportIncluded in BE32065 or BE32066 Bale Ejector (Complete)

363.00

BE22074 Wagon Hitch, Center Telescoping with Support 594.00

PickupBE32309 Feeding Enhancement Kit

328, 338, and 348 Square Balers508.20

Twine SystemBE21437 Multi-Luber 713.90

WAGON HITCHESBE22065 Wagon Hitch, Center Telescoping with Bale Chute Extension 808.50

BE22557 Wagon Hitch, Remote Release 281.60





Powershaft with540 RPM PTO Sliding Collar Hookup,Long Tongue, Equal Angle Hitch,and Slip Clutch



11L-14 In. 6 PR Rib Implement Tireon Left Hand Side

26-12.00 12 In. 4 PR High FlotationTire on Right Hand Side



List PriceSuggested

USD ($)



6014E 328 Twine Baler PR 22,633.00

DESTINATION





Same Price




PACKAGE CONFIGURATIONS0850 Bale Chutes

Side drop bale chute, regular bale chute, or less bale chute (Codes 2000,2010,2095) willautomatically be added along with the associated incremental pricing for each.

In Configuration

DENSITY CONTROL


328 Twine Baler PREquipment for Base Machine



List PriceSuggested

USD ($)

DENSITY CONTROL ...Continued...9300 Side Hay Resistor 48.00






DENSITY CONTROLBE20120 Side Hay Resistor 52.80




328 Twine Baler PRContinued



Powershaft with 540 RPM PTO SlidingCollar Hookup, Tongue, Equal AngleHitch and Slip Clutch



11L-14 In. 6 PR Rib ImplementTire on Left Hand Side

26-12.00-12 In. 4 PR High FlotationTire on Right Hand Side



List PriceSuggested

USD ($)



6241E 338 Series Baler 24,932.00

DESTINATION





Same Price


Same Price




KNOTTER1000 Twine Knotters In Base Price

1020 Wire Knotters 2,191.00


338 Series BalerEquipment for Base Machine



List PriceSuggested

USD ($)



9004 Bale Ejector (Complete), Electric Distance and Hydraulic Tilt Controls Including Cylinder(English Decals)U.S. and Canada Markets.

9,744.00


10,296.00


9,744.00









HYDRAULICS9050 Hydraulic Tongue Positioning Cylinder 429.00

9500 Hydraulic Tongue Positioning Bracket 129.00





338 Series BalerContinued



List PriceSuggested

USD ($)

ALLIED SUPPLIER INFORMATION ...Continued...Harvest Tec, Inc.P.O. Box 63Hudson WI 54016Telephone: (715) 386-9100 or (800) 635-7468Fax: (715) 386-9509






10,718.40


10,718.40


11,325.60


11,325.60



BE23854 Bale Ejector, Distance Controls with Hydraulic Cylinder SupportsIncluded in BE32066 Bale Ejector (Complete)Requires BE21036 and BE22060 if ordered separately.

731.50


1,830.40


74.80


416.90


410.30






List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE20120 Side Hay Resistor 52.80



HYDRAULICSBE22078 Hydraulic Tongue Positioning Bracket 141.90

BE24273 Hydraulic Tongue Positioning Cylinder 471.90



363.00











Powershaft with 540 RPM PTO SlidingCollar Hookup, Tongue, Equal AngleHitch and Slip Clutch







List PriceSuggested

USD ($)



6242E 338 Series Baler PR 24,932.00

DESTINATION





Same Price





Twine Knotter System and Bale Chute. Twine Knotter System, Side Drop Bale Chute, RegularBale Chute, or Less Bale Chute (Codes 1000, 2000/2010/2095) will automatically be addedalong with the associated incremental pricing for each.

In Configuration

KNOTTER


338 Series Baler PREquipment for Base Machine



List PriceSuggested

USD ($)

KNOTTER ...Continued...1000 Twine Knotters In Base Price









338 Series Baler PRContinued


14 x 18 In. Bale 12 to 50 In. LongRegular Bale Chute74 In. Pickup with 156 Teeth93 Strokes per Minute, 30 In. StrokesCategory 4, Three Joint Powershaft

with 540 RPM PTO Sliding CollarTelescoping Hookup, Tongue, EqualAngle Hitch and Slip Clutch

Support Bracket for Hydraulic Hoseand PTO Hookup

Pickup CompressorJackBale Counter



Plungerhead Extensions(Serial Number 843101 and Above)

Safety Chain


List PriceSuggested

USD ($)



6251E 348 Series Baler 27,458.00

DESTINATION





Same Price


Same Price





1010 Twine Baler With Multi-Luber 600.00


348 Series BalerEquipment for Base Machine



List PriceSuggested

USD ($)

KNOTTER ...Continued...1030 Wire Baler With Multi-Luber 2,233.00

POWER TAKE-OFF3000 Category 4

Category 4, Three-Joint Powershaft with 540 RPM PTO Sliding Collar Telescoping Hookup,Tongue, Equal Angle Hitch and Slip Clutch

In Base Price

3020 Category 5Category 5, Three-Joint Powershaft with 540 RPM PTO Sliding Collar Telescoping Hookup,Tongue, Equal Angle Hitch, Slip Clutch and Brackets for Hydraulic Tongue Positioning.

809.00



9004 Bale Ejector (Complete), Electric Distance and Hydraulic Tilt Controls Including Cylinder(English Decals)U.S. and Canada Markets.

9,744.00


10,296.00


9,744.00








HYDRAULICS9050 Hydraulic Tongue Positioning Cylinder 429.00

9500 Hydraulic Tongue Positioning Bracket 129.00

LIGHTING





List PriceSuggested

USD ($)

LIGHTING ...Continued...9030 Auxiliary Lights - 12 Volt 305.00




Harvest Tec, Inc.P.O. Box 63Hudson WI 54016Telephone: (715) 386-9100 or (800) 635-7468Fax: (715) 386-9509





10,718.40


10,718.40


11,325.60


11,325.60



BE23854 Bale Ejector, Distance Controls with Hydraulic Cylinder SupportsIncluded in BE32068 and Bale Ejector (Complete)Requires BE21036 and BE22060 if ordered separately.

731.50


1,830.40


74.80





List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE22060 Bale Ejector, Hydraulic Cylinder for Tilt Control

Included in BE32068 Bale Ejector (Complete)416.90


410.30


BE20120 Side Hay Resistor 52.80



HYDRAULICSBE22078 Hydraulic Tongue Positioning Bracket 141.90

BE24273 Hydraulic Tongue Positioning Cylinder 471.90



363.00


LIGHTINGBE21106 Auxiliary Lights - 12 Volt 335.50









14 x 18 In. Bale 12 to 50 In. LongRegular Bale Chute74 In. Pickup with 156 Teeth93 Strokes per Minute, 30 In. StrokesCategory 4, Three Joint Powershaft

with 540 RPM PTO Sliding CollarTelescoping Hookup, Tongue, EqualAngle Hitch and Slip Clutch

Support Bracket for Hydraulic Hoseand PTO Hookup

Pickup CompressorJackBale Counter



Plungerhead Extensions(Serial Number 843101 and Above)

Safety Chain


List PriceSuggested

USD ($)



6252E 348 Series Baler PR 27,458.00

DESTINATION





Same Price





Twine Knotter System, Bale Chute, Cat. 4 Hookup or Cat. 5 Hookup. Twine Knotter System,Side Drop Bale Chute, Regular Bale Chute, or Less Bale Chute, Cat. 4 Hookup, or Cat. 5Hookup (Codes 1000, 2000/2010/2095, 3000/3020) will automatically be added along with theassociated incremental pricing for each.

In Configuration

0851 Twine Knotter System with Multi-Luber, Bale Chute, Cat. 4 Hookup or Cat. 5 Hookup In Configuration


348 Series Baler PREquipment for Base Machine



List PriceSuggested

USD ($)

PACKAGE CONFIGURATIONS ...Continued...Twine Knotter System, Side Drop Bale Chute, Regular Bale Chute, or Less Bale Chute, Cat. 4Hookup, or Cat. 5 Hookup (Codes 1010, 2000/2010/2095, 3000/3020) will automatically beadded along with the associated incremental pricing for each.

0852 Wire Knotter System with Multi-Luber, Bale Chute, Cat. 4 Hookup or Cat. 5 HookupWire Knotter System, Side Drop Bale Chute, Regular Bale Chute, or Less Bale Chute, Cat. 4Hookup, or Cat. 5 Hookup (Codes 1030, 2000/2010/2095, 3000/3020) will automatically beadded along with the associated incremental pricing for each.

In Configuration


1010 Twine Baler With Multi-Luber 600.00

1030 Wire Baler With Multi-Luber 2,233.00

POWER TAKE-OFF3000 Category 4

Category 4, Three-Joint Powershaft with 540 RPM PTO Sliding Collar Telescoping Hookup,Tongue, Equal Angle Hitch and Slip Clutch

In Base Price

3020 Category 5Category 5, Three-Joint Powershaft with 540 RPM PTO Sliding Collar Telescoping Hookup,Tongue, Equal Angle Hitch, Slip Clutch and Brackets for Hydraulic Tongue Positioning.

809.00







348 Series Baler PRContinued


32in by 35in up to 118in Long BaleMegaWide Pickup88in (2.2m) Wide PickupEight Staggered Tooth BarsSide Flare Crop GuidesPickup Gauge Wheels, Right and LeftAdjustable Roller BaffleAdjustable Height ControlAutomatic Cam Clutch AlertHeavy Duty, High Capacity RotorHeavy Duty Plunger at 45 Strokes Per MinuteHeavy Duty Fly WheelConstant Velocity 1000 RPM PTO Tractor Hookup1-3/8in 1000 RPM PTO DrivelineShear Bolt ProtectedDouble Tie Knotter SystemGear and Shaft DrivenKnotter Cleaning FansMechanical Knotter TripCat 3, 38.1mm (1.5in) Hitch Bushing - InstalledCat 4, 50.8mm (2.0in) Hitch BushingSingle Axle Without BrakesTwo Single 600/50 - 22.5 TiresAdjustable Hydraulic DensityAutomatic Hydraulic Bale Chamber3 CylindersHydraulic Folding Roller ChuteBale Drop Sensor

Functional StylingSingle Row Twine BoxesTwine Boxes Hold up to 30 Twine Balls9 Degrees of Twine Box MovementGull Wing Composite DoorsHydraulic JackFlashing Warning Lights with Turning Signals30,000 Lb. (133 kN) Safety ChainHydraulic Pickup LiftFactory Installed Automatic Greasing SystemLess ISOBUS Display, Display can be Ordered (LessMounting Brackets)Display Functions:Knotter FlagsDriving DirectionsWarning Codes and AlertsDisplay Bale/Flake SizeOut of Twine AlertLow Voltage IndicatorDisplay Error CodesSince baler is equipped with hydraulic pickup, thetractor must be equipped with at least one SCV.


List PriceSuggested

USD ($)


BASE MACHINEEX-WORKS Ottumwa, IA

3315E L331 Large Square Baler 134,657.00

DESTINATION

North America0184 Canada Same Price

0202 United States In Base Price



Same Price


Same Price


Same Price


L331 Large Square BalerEquipment for Base Machine



List PriceSuggested

USD ($)

OPERATOR'S MANUAL AND DECALS ...Continued...0448 English No Text

English operator manual and text free decals.Same Price

POWER TAKE-OFF (PTO) DRIVELINE3551 1-3/8 in. 1000 RPM PTO In Base Price

3553 1-3/4 in. 1000 RPM PTO Same Price

GEARBOX3570 Main Drive Gearbox w/ Shear Bolt Protection In Base Price

3571 Main Drive Gearbox w/ Flywheel Cam Clutch Protection 1,165.00

PICKUP1250 2.2m MegaWide Pickup In Base Price

1251 2.2m Premium MegaWide Pickup 4,395.00

ROTOR1700 2.2m Standard Rotor In Base Price

1701 2.2m Precutter Rotor13 knife precutter with spring overload protection.

17,864.00

AXLES7001 Tandem Axle with Hydraulic Brakes 6,295.00

7002 Tandem Axle without Brakes 2,631.00

7020 Single Axle with Hydraulic Brakes 584.00

7021 Single Axle without Brakes In Base Price

WHEELS AND TIRES3020 4 - Tandem Axle Tires 500/55 - 20 827.00

3021 4 - Tandem Axle Tires 550/45 - 22.5 2,120.00

3030 2 - Single Axle Tires 600/50 - 22.5 In Base Price

3031 2 - Single Axle Tires 710/40R - 22.5 (Radial) 928.00

TYING SYSTEM1310 Mechanical Knotter Trip In Base Price

1311 Electronic Knotter Trip 1,099.00

DISPLAYS


L331 Large Square BalerContinued



List PriceSuggested

USD ($)

DISPLAYS ...Continued...1820 Less GreenStar Display In Base Price

1823 GreenStar 2 1800 DisplayDoes not include display harness (BE32277). Display shipped separately.

1,850.00


5,895.00

MOISTURE SENSOR1280 Less Moisture Sensor In Base Price

1281 Moisture Sensor 2,336.00

WEIGHING SYSTEM1275 Less Weighing System In Base Price

1276 Weighing System 2,641.00

BALE CHUTES1600 Less Roller Chute

For balers that will utilize a bale accumulator.-2,446.00

1602 Bale Roller Chute In Base Price

PRESERVATIVE APPLICATOR1720 Less Preservative Applicator In Base Price

1721 Preservative Applicator 10,170.00

BALERASSIST8804 BalerAssist 4,812.00

KNIFE SLOT FILLERS8111 Precutter Knife Filler Plates

3x3 - 13 Filler Plates304.00

KNIVES9113 Precutter Knives

3x3 - 13 knives325.00

GATHERING WHEELS9740 Converging Wheels

Only available with the 2.2m MegaWide pickup.1,813.00

BRACKETS9748 ISOBUS Display Mounting Bracket 100.00





List PriceSuggested

USD ($)

BRACKETS ...Continued...For 30, 40, 50, 55, 60, or 70 Series Tractors.


96.00


For 30, 40, 50, 55, 60, or 70 Series Tractors or competitive tractor models without a currentISOBUS wiring harness installed. Requires a 3 terminal convenience outlet. Includes battery(AFH205692) harness and cab harness (AF205697). Due to restricted functionality, harness isrecommended for baler use ONLY.

590.00

PRE-COMPRESSION CHAMBER SILAGE KITS8005 Precompression Chamber High Moisture Kit 588.00

HITCHES9650 Cat 4 40.0mm (1.7-in.) Hitch Bushing 73.00

GREASING9004 Auto Lube System Fast Fill Kit 131.00

LIGHTING9780 LED Field Light Kit

Two Rearward Facing Lamps.558.00

WEAR PARTS BOX9660 Wear Parts Box 2,238.00


CameraSW31200050 4' Camera Harness

Replacement Camera Harness74.20

SWVMAGBASE Magnetic Mounting BaseReplacement Mounting Base

17.79

SWBE32568 Wireless Baler Camera KitIncludes camera, display, mounting base, and harness.

598.13

SWBE32595 Wireless Camera KitIncludes camera, mounting base, and harness.

273.60





List PriceSuggested

USD ($)


Drivelines and DrivetrainBE32575 PTO Driveline, 1-3/4 In. 1000 RPM Telescoping Tractor Hookup

For L330 and L340 balers.1,523.50

BE32574 PTO Driveline, 1-3/8 In. 1000 RPM Telescoping Tractor HookupFor L330 and L340 balers.

1,496.00



Hitch and DrawbarBE23622 Rubber Drawbar Shield 57.20

BE32582 Safety Chain for Towed Equipment, 30,000Lb. (135 kN) 79.20

Operator EnvironmentTY15133 Fire Extinguisher Mounting Bracket


38.99


142.49

PickupBE32580 Fixed Gauge Wheels

For L330 Balers Only.594.00

BE32581 Pivoting Gauge WheelsFor L330 Balers Only

996.60

Precompression ChamberAFH212437 Precompression Chamber Silage Kit (3x3)

For L330 3x3 balers.1,239.40




35in by 46.5in up to 118in Long BaleMegaWide Pickup88in (2.2m) Wide PickupEight Staggered Tooth BarsSide Flare Crop GuidesPickup Gauge Wheels, Right and LeftAdjustable Roller BaffleAdjustable Height ControlAutomatic Cutout Clutch AlertHeavy Duty, High Capacity RotorHeavy Duty Plunger at 45 Strokes Per MinuteHeavy Duty Fly Wheel and ClutchConstant Velocity 1000 RPM PTO Tractor Hookup1-3/8in 1000 RPM PTO DrivelineCam Clutch ProtectedDouble Tie Knotter SystemGear and Shaft DrivenKnotter Cleaning FansMechanical Knotter TripCat 3, 38.1mm (1.5in) Hitch Bushing - InstalledCat 4, 50.8mm (2.0-in) HitchSingle Axle Without BrakesTwo Single 600/50/22.5 TiresAdjustable Hydraulic DensityAutomatic Hydraulic Bale Chamber4 Cylinders

Hydraulic Folding Roller ChuteBale Drop Sensor

Functional StylingSingle Row Twine BoxesTwine Boxes Hold up to 30 Balls of Twine9 Degrees of Twine Box MovementGull Wing Composite DoorsHydraulic JackHydraulic Roller Chute LockFlashing Warning Lights with Turning Signals10,000 Lb. (45 kN) Safety ChainHydraulic Pickup LiftFactory Installed Automatic Greasing SystemLess ISOBUS Display, Display can be Ordered (LessMounting Brackets)Display Functions:Knotter FlagsDriving DirectionsWarning Codes and AlertsDisplay Bale/Flake SizeOut of Twine AlertLow Voltage IndicatorDisplay Error CodesSince baler is equipped with hydraulic pickup, thetractor must be equipped with at least one SCV.


List PriceSuggested

USD ($)


BASE MACHINEEX-WORKS Ottumwa, IA

3415E L341 Large Square Baler 164,284.00

DESTINATION





Same Price


Same Price

0443 English/Spanish (U.S. ONLY) Same Price


L341 Large Square BalerEquipment for Base Machine



List PriceSuggested

USD ($)

OPERATOR'S MANUAL AND DECALS ...Continued...English and Spanish operator manual and bilingual decals.


Same Price

POWER TAKE-OFF (PTO) DRIVELINE3551 1-3/8 in. 1000 RPM PTO In Base Price

3553 1-3/4 in. 1000 RPM PTO Same Price

PICKUP1250 2.2m MegaWide Pickup In Base Price



ROTOR1700 2.2m Standard Rotor In Base Price


22,673.00

1706 2.5m Standard Rotor Same Price


22,673.00

AXLES7001 Tandem Axle with Hydraulic Brakes 6,295.00

7002 Tandem Axle without Brakes 2,631.00

7020 Single Axle with Hydraulic Brakes 584.00

7021 Single Axle without Brakes In Base Price

WHEELS AND TIRES3020 4 - Tandem Axle Tires 500/55 - 20 827.00

3021 4 - Tandem Axle Tires 550/45 - 22.5 2,120.00

3030 2 - Single Axle Tires 600/50 - 22.5 In Base Price

3031 2 - Single Axle Tires 710/40R - 22.5 (Radial) 928.00

TYING SYSTEM1310 Mechanical Knotter Trip In Base Price

1311 Electronic Knotter Trip 1,099.00





List PriceSuggested

USD ($)

TYING SYSTEM ...Continued...



1,850.00


5,895.00

MOISTURE SENSOR1280 Less Moisture Sensor In Base Price

1281 Moisture Sensor 2,336.00

WEIGHING SYSTEM1275 Less Weighing System In Base Price

1276 Weighing System 2,641.00

BALE CHUTES1600 Less Roller Chute

For balers that will utilize a bale accumulator.-2,446.00

1602 Bale Roller Chute In Base Price

PRESERVATIVE APPLICATOR1720 Less Preservative Applicator In Base Price

1721 Preservative Applicator 10,170.00

BALERASSIST8804 BalerAssist 4,812.00

KNIFE SLOT FILLERS8111 Precutter Knife Filler Plates

3x4 - 21 Filler Plates491.00

KNIVES9113 Precutter Knives

3x4 - 21 knives524.00

GATHERING WHEELS9740 Converging Wheels

Only available with the 2.2m MegaWide pickup.1,813.00





List PriceSuggested

USD ($)




96.00


For 30, 40, 50, 55, 60, or 70 Series Tractors or competitive tractor models without a currentISOBUS wiring harness installed. Requires a 3 terminal convenience outlet. Includes battery(AFH205692) harness and cab harness (AF205697). Due to restricted functionality, harness isrecommended for baler use ONLY.

590.00

PRE-COMPRESSION CHAMBER SILAGE KITS8005 Precompression Chamber High Moisture Kit 588.00

HITCHES9650 Cat 4 40.0mm (1.7-in.) Hitch Bushing 73.00

GREASING9004 Auto Lube System Fast Fill Kit 131.00

LIGHTING9780 LED Field Light Kit

Two Rearward Facing Lamps.558.00

WEAR PARTS BOX9660 Wear Parts Box 2,238.00


CameraSW31200050 4' Camera Harness

Replacement Camera Harness74.20

SWVMAGBASE Magnetic Mounting BaseReplacement Mounting Base

17.79

SWBE32568 Wireless Baler Camera KitIncludes camera, display, mounting base, and harness.

598.13

SWBE32595 Wireless Camera KitIncludes camera, mounting base, and harness.

273.60





List PriceSuggested

USD ($)


Drivelines and DrivetrainBE32575 PTO Driveline, 1-3/4 In. 1000 RPM Telescoping Tractor Hookup

For L330 and L340 balers.1,523.50

BE32574 PTO Driveline, 1-3/8 In. 1000 RPM Telescoping Tractor HookupFor L330 and L340 balers.

1,496.00




BE32582 Safety Chain for Towed Equipment, 30,000Lb. (135 kN) 79.20



38.99


142.49

PickupBE32578 Fixed Gauge Wheels

For L340 Balers Only.662.20

BE32579 Pivoting Gauge WheelsFor L340 Balers Only.

1,093.40

Precompression ChamberAFH212438 Precompression Chamber Silage Kit (3x4)

For L340 3x4 balers.1,881.34




CutterbarOil Immersed Gear Driven Cutting Bed with 3.1 m (10ft 2 in) Cutting Width8 Oval Shaped Low Profile Discs with 2986 rpm SpeedTwo Quick Change Knives on each DiscCutting Height 30 - 80 mm (1.2 - 3.2 in)

Conditioner2.64 m (8 ft 8 in) Wide Rotor with 54 Free SwingingSteel Fingers, 540 mm (21 ft 3 in) diameterBelt Driven with Two Speeds - 780 rpm (factorysetting) or 1000 rpmAdjustable (2 x 6 Positions) Conditioning Hood

WindrowSwath Width 1.2 - 2 m (4 ft to 6 ft 7 in)

Drive1-3/8 in (34.9 mm) 21-Spline Driveline1-3/4 in (44.5 mm) 20-Spline Yoke Available ThroughParts1000 rpm with Friction Slip ClutchClockwise PTO Input (factory setting), Convertibleto Counter Clockwise

ChassisA-Frame Mounting System

A-Frame Adapter (Category 2)Adjustable Hydro Pneumatic Suspension SystemLift Cylinder works with Tractor Hydraulics toMaximize Ground ClearanceBreakaway System to Protect Cutting Bed & AllowContinual WorkTransport Lock StandardMaximum Transport Width 3.1 m (10 ft 2 in)Weight 1270 kg (2800 lb)

MiscellaneousOperators ManualToolbox

Recommended Tractor SpecificationsPTO Power 100 HP (75 kW)Front hitch with downstop chain supports or returnto position hitchOne Single Acting Front SCV (independent of fronthitch)Auxilliary Driving Lights / Loader Light Kit


List PriceSuggested

USD ($)



0741XF F310R Front Mower ConditionerNote: Includes A-frame hitch. Tractor should be equipped with Auxiliary Driving/Loader LightKit. Front-mounted mower-conditioner must be operated by an SCV with float position that isindependent of front lift cylinders. Available with fast-fit knives and steel impeller only.

28,870.00

OPERATOR'S MANUAL AND DECALS9200 French Operator's Manual and Decals (Front F310R and F350R) No Charge

9300 Spanish Operator's Manual and Decals (Front F310R and F350R) No Charge


F310R Front Mower ConditionerEquipment for Base Machine



F310R Front Mower ConditionerContinued



CutterbarOil Immersed Gear Driven Cutting Bed with 3.5 m (11ft 6 in) Cutting Width8 Oval Shaped Low Profile Discs with 2986 rpm SpeedTwo Quick Change Knives on each DiscCutting Height 30 - 80 mm (1.2 - 3.2 in)

Conditioner2.64 m (8 ft 8 in) Wide Rotor with 54 Free SwingingSteel Fingers, 540 mm (21 ft 3 in) diameterBelt Driven with Two Speeds - 780 rpm (factorysetting) or 1000 rpmAdjustable (2 x 6 Positions) Conditioning Hood

WindrowSwath Width 1.2 - 2 m (4 ft to 6 ft 7 in)

Drive1-3/8 in (34.9 mm) 21-Spline Driveline1-3/4 in (44.5 mm) 20-Spline Yoke Available ThroughParts1000 rpm with Friction Slip ClutchClockwise PTO Input (factory setting), Convertibleto Counter Clockwise

ChassisA-Frame Mounting System

A-Frame Adapter (Category 2)Adjustable Hydro Pneumatic Suspension SystemLift Cylinder works with Tractor Hydraulics toMaximize Ground ClearanceBreakaway System to Protect Cutting Bed & AllowContinual WorkTransport Lock StandardMaximum Transport Width 3.5 m (11 ft 6 in)Weight 1330 kg (2932 lb)

MiscellaneousOperators ManualToolbox

Recommended Tractor SpecificationsPTO Power 100 HP (75 kW)Front hitch with downstop chain supports or returnto position hitchOne Single Acting Front SCV (independent of fronthitch)Auxilliary Driving Lights / Loader Light Kit


List PriceSuggested

USD ($)



0751XF F350R Front Mower ConditionerNote: Includes A-frame hitch. Tractor should be equipped with Auxiliary Driving/Loader LightKit. Front-mounted mower-conditioner must be operated by an SCV with float position that isindependent of front lift cylinders. Available with fast-fit knives and steel impeller only.

31,191.00

OPERATOR'S MANUAL AND DECALS9200 French Operator's Manual and Decals (Front F310R and F350R) No Charge

9300 Spanish Operator's Manual and Decals (Front F310R and F350R) No Charge


F350R Front Mower ConditionerEquipment for Base Machine



F350R Front Mower ConditionerContinued



Cutterbar2 Oil Immersed Gear Driven Cutting Beds Providing8.7 m (28 ft 8 in) Cutting Width(Includes Front Moco)2 x 7 Oval Shaped Low Profile Discs with 2986 rpmSpeedTwo Quick Change Knives on each DiscCutting Height 30 - 80 mm (1.2 - 3.2 in)

Conditioner2 x 2.64 m (8 ft 8 in) Wide Rotor with 54 FreeSwinging Steel Fingers, 540 mm (21 ft 3 in)diameterBelt Driven with Two Speeds - 780 rpm (factorysetting) or 1000 rpmAdjustable (2 x 6 Positions) Conditioning Hood

Windrow2x Adjustable Swath Width 1.2 to 2.5 m (4 ft to 8ft 2 in)

Drive1-3/4 in (44.5 mm) 20-Spline Driveline1000 rpm with Overrunning and Slip ClutchProtection

ChassisAdjustable Hydro Pneumatic Suspension System withIndependent Settings for each UnitIndependent Breakaway System

Machine Offset Controlled From Cab: 270 mm (10.6in) Left or RightMachine Overlap Between Front and Rear CuttingPlatforms 0.3-0.5 cm (1-1.6 ft)Maximum Transport Width 2.95 m (9 ft 8 in)Maximum Transport Height 4 m (13 ft 1 in)Weight 3025 kg (6669 lb)

MiscellaneousOperators ManualOperators Manual ContainerTransport LightsToolbox

Recommended Tractor SpecificationsPTO Power 210 HP (155 kW) - Includes Front MocoCategory 3, 3-Point Hitch (3 And 4N Quick HitchCompatible)Electrical Outlets (7 Pin Connector for lights/3Pin Connector for Control Box)Two Double Acting SCV s

Front Moco is Required


List PriceSuggested

USD ($)



0761XF R870R Twin Rear Mower ConditionerNote: Includes quick hitch adapters. Available with Fast-fit knives and steel impeller only.Includes wide spread feature. Compatible with F310R- 3.1m Front Mower Conditioner Only.

70,704.00

OPERATOR'S MANUAL AND DECALS9013 French Operator's Manual and Decals (Rear- R870R, R910R, R950R) No Charge

9037 Spanish Operator's Manual and Decals (Rear- R870R, R910R, R950R) No Charge


R870R Twin Rear Mower ConditionerEquipment for Base Machine



R870R Twin Rear Mower ConditionerContinued








Machine Offset Controlled From Cab: 270 mm (10.6in) Left or RightMachine Overlap Between Front and Rear CuttingPlatforms 0.3-0.5 cm (1-1.6 ft)Maximum Transport Width 2.95 m (9 ft 8 in)Maximum Transport Height 4 m (13 ft 1 in)Weight 3175 kg (7000 lb)





List PriceSuggested

USD ($)



0771XF R950R Twin Rear Mower ConditionerNote: Includes quick hitch adapters. Available with Fast-fit knives and steel impeller only.Includes wide spread feature. Compatible with F310R- 3.1m Front Mower Conditioner Only.

73,178.00











Machine Offset Controlled From Cab: 270 mm (10.6in) Left or RightMachine Overlap Between Front and Rear CuttingPlatforms 0.3-0.5 cm (1-1.6 ft)Maximum Transport Width 3.35 m (11 ft)Maximum Transport Height 4 m (13 ft 1 in)Weight 3225 kg (7110 lb)





List PriceSuggested

USD ($)



0781XF R990R Twin Rear Mower ConditionerNote: Includes quick hitch adapters. Available with Fast-fit knives and steel impeller only.Includes wide spread feature. Compatible with F350R- 3.5 m Front Mower Conditioner Only.

75,231.00






Impeller Conditioner Only8 Ft. 2 In. Cutting WidthLow-Profile Modular Cutterbar Made of

High-Strength Nodular Iron Castings5 Shear-Protected Cutting Disks with

Replaceable Heat Treated InsertsTwo Reversible Cutting Knives per DiskReplaceable Skid Plate Under Each

Cutting DiskAdjustable Gauge ShoesImpeller Conditioner:

33 Equally Spaced, V-tinesTwo-speed Conditioner DriveCrank Adjustable Conditioning Hood with Gauge

Clevis Hitch and Standard Tongue540 RPM ASAE Category 4 Telescoping

Hookup with Sliding Collar forTractors with 1-3/8 In. DiameterPTO Shaft

Overrunning DrivelineSlip Clutch3-V Power Band Belt Drive

No-Tools Cutterbar Flotation AdjustmentIntegral Hydraulic

Platform Lift System with Cylinders,Hoses and Breakaway Couplers

Hydraulic Platform Cylinder LockoutsScrew-Type JackNo-Tools Forming Shield AdjustmentAdjustable Cutterbar Angle-

TurnbuckleTwo Wheels with 11LX15, 8 PR

Hi-Flotation TiresHydraulic Tongue PositionerTransport Lock (Tongue)SMV SignFlashing Warning LightsSafety Chain

For protection from thrown objects, it is required that this Mower-Conditioner be used with a tractor equipped with a complete operator enclosure.


List PriceSuggested

USD ($)



2130E 625 Side-Pull Rotary Mower-Conditioner with Impeller Conditioner 24,633.00

DESTINATION



OPERATOR'S MANUAL, DECALS, AND LANGUAGE0409 English (U.S. / Canada ONLY) In Base Price


Same Price

0413 French (Canada ONLY)Text free decals and French operator manual.

Same Price

HITCHESTurn Limiters, order code 9000 or 9001, may be required for tractors having a hitch pointbeyond the rear drive wheels; EXCLUDING machines equipped with Rockshaft SwivelHitches. See "Attachments - Order as Desired" or Agricultural Sales Manual for additionalordering information.


625 Side-Pull Rotary Mower-Conditioner with Impeller ConditionerEquipment for Base Machine



List PriceSuggested

USD ($)

HITCHES ...Continued...

2500 Clevis Hitch with Standard Tongue In Base Price

2510 Ball-Joint Hitch and Slip-On Drawbar Extension with Standard Tongue-540 RPM TractorHookup

353.00

WHEELS AND TIRES4000 11L X 15, 8 PR Hi-Flotation Wheels and Tires In Base Price

4010 31 X 13.5-15, 8 PR Hi-Flotation Wheels and Tires 530.00

ANGLE ADJUSTMENT5000 Turnbuckle Top Link In Base Price

5010 Hydraulic Tilt Control - IndependentRequires separate selective control valve. Total of Three SCVs are required for operation.

351.00

REAR POWERLINE6500 Rear Powerline with Standard U-Joints In Base Price

6510 Rear Powerline with Single CV U-JointEnables platform to be repositioned, under power, for limited amounts of time.

758.00

HITCHES9000 Turn Limiters, Narrow 197.00

9001 Turn Limiters, Wide 292.00

CUSTOMER GOLD KEY PROGRAMSThe Gold Key Customer Experience Tour is a personal guided tour that provides you with theunique opportunity to watch a machine similar to the one you are purchasing during its finalstages of manufacturing. This tour can be scheduled by visiting goldkey.deere.com, a part ofthe Dealer Advertising Resources site.


CutterbarBE32040 Cutting Angle Adjustment, Hydraulic Tilt Control

Requires separate selective control valve. Total of three SCVs are required for operation.726.00

AFH200183 Cutting Angle Adjustment, Turnbuckle Top Link 292.24

CC104769 Gauge Shoe Extension - Four RequiredUsed to increase maximum cutting height.Also requires the following items from Parts for installation:

8-19M7790 Bolts (M12 X 35)8-14M7401 Lock Nuts

33.65


625 Side-Pull Rotary Mower-Conditioner with Impeller ConditionerContinued



List PriceSuggested

USD ($)


DrivelinesBE10055 PTO Driveline, 540 RPM Telescoping Tractor Hookup for Ball-Joint Hitch

Gearcase must match RPM of tractor hookup.Used to convert standard tongue with 540 RPM Clevis Hitch.

739.20

BE10057 PTO Driveline, 540 RPM Telescoping Tractor Hookup for Clevis HitchGearcase must match RPM of tractor hookup.Used to convert standard tongue with 540 RPM Ball-Joint Hitch and Drawbar Extension.

739.20

BE32038 Rear PTO Driveline, 540 RPM with Single CV U-JointEnables platform to be repositioned, under power, for limited amounts of time.

2,050.40

BE32032 Rear PTO Driveline, 540 RPM with Standard U-Joints for Standard Tongue 1,128.60

ElectricalRE17282 7-Terminal Electrical Outlet Socket 95.70

HITCHESBE31086 Turn Limiters, Narrow 216.70

BE31087 Turn Limiters, Wide 321.20

Hitch and DrawbarBE31176 Ball-Joint Hitch and Slip-On Drawbar Extension

Gearcase must match RPM of tractor hookup.Also requires BE10055, 540 RPM tractor hookup for Ball-Joint Hitch.Used to convert standard tongue with Clevis Hitch.

642.40

BE31153 Clevis HitchGearcase must match RPM of tractor hookup.Also requires BE10057, 540 RPM tractor hookup for Clevis Hitch.Used to convert standard tongue with Ball-Joint Hitch and Drawbar Extension.

227.70

PM03015 Quick Hitch Bushing - Two RequiredTo adapt swivel hitch for use with quik-coupler.

11.49

BE23622 Rubber Drawbar Shield 57.20




38.99


142.49




625 PR MOCOImpeller Conditioner Only8 Ft. 2 In. Cutting WidthLow-Profile Modular Cutterbar Made of




33 Equally Spaced, V-tinesTwo-speed Conditioner DriveCrank Adjustable Conditioning Hood with Gauge



Overrunning DrivelineSlip Clutch3-V Power Band Belt Drive

No-Tools Cutterbar Flotation AdjustmentIntegral Hydraulic

Platform Lift System with Cylinders,Hoses and Breakaway Couplers

Hydraulic Platform Cylinder LockoutsScrew-Type JackNo-Tools Forming Shield AdjustmentAdjustable Cutterbar Angle-

TurnbuckleTwo Wheels with 11LX15, 8 PR




List PriceSuggested

USD ($)



2131E 625 Side-Pull Rotary Mower-Conditioner with Impeller Conditioner PR 24,633.00

DESTINATION




0413 French (Canada ONLY) Same Price


2500 Clevis Hitch with Standard Tongue In Base Price

2510 Ball-Joint Hitch and Slip-On Drawbar Extension with Standard Tongue-540 RPM Tractor 353.00


625 Side-Pull Rotary Mower-Conditioner with Impeller Conditioner PREquipment for Base Machine



List PriceSuggested

USD ($)

HITCHES ...Continued...Hookup




5010 Hydraulic Tilt Control - Independent 351.00

PACKAGES

Rotary Mower-Conditioner PR Packages0850 540 RPM Impeller Conditioner Package

Requires manual selection from the Hitch, Tires and Wheels, Cutterbar Angle, and RearPowerline sections.

In Configuration


6510 Rear Powerline with Single CV U-Joint 758.00


625 Side-Pull Rotary Mower-Conditioner with Impeller Conditioner PRContinued


Impeller Conditioner or UrethaneRoll Optional

9 Ft. 9 In. (3M) Cutting WidthLow-profile, Modular Cutterbar

Made of High-Strength NodularIron Castings

6 Shear-Protected Cutting Diskswith Replaceable HeatTreated Inserts

Two reversible Cutting KnivesPer Disk

Replaceable Skid Plate undereach Cutting Disk

Adjustable Gauge ShoesImpeller Conditioner:

45 Equally Spaced V-TinesTwo-Speed Conditioner DriveCrank AdjustableConditioning Hood with Gauge



Overrunning Driveline3-V Power Band Belt DriveNo-Tools Cutterbar Flotation AdjustmentIntegral Hydraulic Platform

Lift System with Cylinders,Hoses, and Breakaway Couplers

Hydraulic Platform Cylinder LockoutsScrew-Type JackNo-Tools Forming Shield AdjustmentAdjustable Cutterbar Angle-TurnbuckleTwo Wheels with 11L X 15 8 PR




List PriceSuggested

USD ($)



2140E 630 Side-Pull Rotary Mower-Conditioner 28,551.00

DESTINATION





Same Price


Same Price

HITCHESTurn Limiters, order code 9000 or 9001, may be required for tractors having a hitch pointbeyond the rear drive wheels; EXCLUDING machines equipped with Rockshaft Swivel


630 Side-Pull Rotary Mower-ConditionerEquipment for Base Machine



List PriceSuggested

USD ($)

HITCHES ...Continued...Hitches. See "Attachments - Order as Desired" or Agricultural Sales Manual for additionalordering information.

2500 Clevis Hitch with Standard TongueCANNOT be converted to Rockshaft Swivel Hitch.

In Base Price

2510 Ball-Joint Hitch and Slip-On Drawbar Extension with Standard Tongue-540 RPM TractorHookupCANNOT be converted to Rockshaft Swivel Hitch.

353.00

2520 Rockshaft Swivel Hitch and TongueCode 2520 is for Category 2 or 3N, three-point hitch with or without Quik-Coupler. IncludesDownstop Chain. CANNOT be converted to Standard Tongue.

1,927.00





351.00

PACKAGES

Impeller Conditioner Packages0902 540 RPM Impeller Conditioner Package

Codes 1000 and 1510 will automatically be added along with the associated incrementalpricing for each.Requires manual selection from the Hitch; Tires and Wheels; and Cutterbar Angle sections.

In Configuration

0901 1000 RPM Impeller Conditioner PackageCodes 1000 and 1500 will automatically be added along with the associated incrementalpricing for each.Requires manual selection from the Hitch; Tires and Wheels; Cutterbar Angle; and RearPowerline sections.

In Configuration

Roll Conditioner Packages0912 540 RPM Urethane Roll Conditioner Package

Codes 1010 and 1510 will automatically be added along with the associated incrementalpricing for each. Requires manual selection from the Hitch; Tires and Wheels; CutterbarAngle; and Rear Powerline sections.

In Configuration

0911 1000 RPM Urethane Roll Conditioner PackageCodes 1010 and 1500 will automatically be added along with the associated incrementalpricing for each.Requires manual selection from the Hitch; Tires and Wheels; Cutterbar Angle; and RearPowerline sections.

In Configuration


630 Side-Pull Rotary Mower-ConditionerContinued



List PriceSuggested

USD ($)

PACKAGES ...Continued...0922 540 RPM V10 Steel Roll Conditioner Package

Order Code 1025 and 1510 will automatically be added along with the associated incrementalpricing.Requires manual selection from Swivel Hitch section and Cutterbar Angle Adjustment section.

In Configuration

0921 1000 RPM V10 Steel Roll Conditioner PackageOrder Code 1025 and 1500 will automatically be added along with the associated incrementalpricing.Requires manual selection from Swivel Hitch section and Cutterbar Angle Adjustment section.

In Configuration

CONDITIONER1000 Impeller Conditioner In Base Price

1010 Urethane Roll Conditioner74 In. long with Recessed Intermittent Cleats - 10 In. Diameter.Quick-Adjust Roll Spacing.Adjustable Roll Pressure independent of Float Pressure.

1,531.00

1025 V10 Steel Roll Conditioner74 In. (1878 mm) long with ten intermeshing flutes in V-pattern - 10 In. (254 mm) diameterShaft drive to conditionerQuick-Adjust Roll SpacingAdjustable Roll PressureCushioned Roll Stops

2,190.00

HOOKUPMower-Conditioner is shipped with Gearcase RPM matching the PTO Hookup ordered.Gearcase Speed CANNOT be converted.

1500 1000 RPM Tractor Hookup, ASAE Category 4, 1-3/8 In. Diameter PTO Shaft In Base Price

1510 540 RPM Tractor Hookup, ASAE Category 4, 1-3/8 In. Diameter PTO ShaftNot compatible with Swivel Hitch Code 2520.

285.00



758.00



WINDROW DISTRIBUTION KIT8300 Impeller Conditioner - Windrow Distribution Kit

The Wide Swath Kit consists of a series of four steel fins that are bolted to the bottom side ofthe swath board and is designed to spread the swath wider than the base configuration of themachine.

232.00





List PriceSuggested

USD ($)

WINDROW DISTRIBUTION KIT ...Continued...8305 Roll Conditioner - Windrow Distribution Kit

The Wide Swath Kit consists of a series of six steel fins that are bolted to the bottom side of theswath board and is designed to spread the swath wider than the base configuration of themachine.

232.00








33.65

DrivelinesBE10056 PTO Driveline, 1-3/8 In. 1000 RPM Telescoping Tractor Hookup

for Ball-Joint HitchGearcase must match RPM of tractor hookup.Used to convert standard tongue with 1000 RPM Clevis Hitch.

739.20

BE10058 PTO Driveline, 1-3/8 In. 1000 RPM Telescoping Tractor Hookupfor Clevis HitchGearcase must match RPM of Tractor Hookup.Used to convert standard tongue with 1000 RPM Ball-Joint Hitch and Drawbar Extension.

739.20

BE32031 PTO Driveline, 1-3/8 In. 1000 RPM Telescoping Tractor Hookupfor Swivel Hitch

645.70

BE10055 PTO Driveline, 540 RPM Telescoping Tractor Hookup for Ball-Joint HitchGearcase must match RPM of tractor hookup.Used to convert standard tongue with 540 RPM Clevis Hitch.

739.20

BE10057 PTO Driveline, 540 RPM Telescoping Tractor Hookup for Clevis HitchGearcase must match RPM of tractor hookup.Used to convert standard tongue with 540 RPM Ball-Joint Hitch and Drawbar Extension.

739.20


1,719.30

BE32033 Rear PTO Driveline, 1000 RPM with Standard U-Joints for Standard Tongue 806.30

BE32035 Rear PTO Driveline, 1000 RPM with Standard U-Joints for Swivel Tongue 806.30





List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32038 Rear PTO Driveline, 540 RPM with Single CV U-Joint

Enables platform to be repositioned, under power, for limited amounts of time.2,050.40

BE32032 Rear PTO Driveline, 540 RPM with Standard U-Joints for Standard Tongue 1,128.60

BE31142 Universal Driveshaft, 1000 RPM HookupFor 630, 635, 830, 835 Models.For use with 6R tractors that utilize the quick hitch and 2 pt.

809.60


809.60





Gearcase must match RPM of tractor hookup.Also requires BE10056, 1000 RPM tractor hookup for Ball-Joint Hitch OR BE10055, 540RPM tractor hookup for Ball-Joint Hitch.Used to convert standard tongue with Clevis Hitch.

642.40

BE31153 Clevis HitchGearcase must match RPM of tractor hookup.Also requires BE10058, 1000 RPM tractor hookup for Clevis Hitch OR BE10057, 540 RPMtractor hookup for Clevis Hitch.Used to convert standard tongue with Ball-Joint Hitch and Drawbar Extension.

227.70


11.49





38.99


142.49





9 Ft. 9 In. (3M) Cutting WidthLow-profile, Modular Cutterbar



Two reversible Cutting KnivesPer Disk

Replaceable Skid Plate undereach Cutting Disk











List PriceSuggested

USD ($)



2141E 630 Side-Pull Rotary Mower-Conditioner PR 28,551.00

DESTINATION





Same Price



630 Side-Pull Rotary Mower-Conditioner PREquipment for Base Machine



List PriceSuggested

USD ($)

HITCHES ...Continued...2500 Clevis Hitch with Standard Tongue

CANNOT be converted to Rockshaft Swivel Hitch.In Base Price

2510 Ball-Joint Hitch and Slip-On Drawbar Extension with Standard Tongue-540 RPM TractorHookupCANNOT be converted to Rockshaft Swivel Hitch.

353.00





351.00

PACKAGES


Requires manual selection from the Hitch, Tires and Wheels, Cutterbar Angle, and RearPowerline sections.Codes 1000 and 1510 will automatically be added along with the associated incrementalpricing for each.

In Configuration

0851 540 RPM Roll Conditioner PR PackageCodes 1010 and 1510 will automatically be added along with the associated incrementalpricing for each. Requires manual selection from the Hitch, Tires and Wheels, CutterbarAngle, and Rear Powerline sections.

In Configuration

0852 540 RPM V10 Steel Roll Conditioner PackageCodes 1025 and 1510 will automatically be added along with the associated incrementalpricing for each. Requires manual selection from the Hitch, Tires and Wheels, CutterbarAngle, and Rear Powerline sections.

In Configuration



1,531.00


2,190.00


630 Side-Pull Rotary Mower-Conditioner PRContinued



List PriceSuggested

USD ($)

HOOKUPMower-Conditioner is shipped with Gearcase RPM matching the PTO Hookup ordered.Gearcase Speed CANNOT be converted.


285.00



758.00





11 Ft. 6 In. (3.5M) Cutting WidthLow-Profile Modular Cutterbar



Two Reversible Cutting KnivesPer Disk

Replaceable Skid Plate UnderEach Cutting Disk


57 Equally Spaced V-TinesTwo-Speed Conditioner DriveCrank Adjustable ConditioningHood with Gauge









List PriceSuggested

USD ($)



2150E 635 Side-Pull Rotary Mower-Conditioner 32,069.00

DESTINATION





Same Price


Same Price

HITCHESTurn Limiters, order code 9000 or 9001, may be required for tractors having a hitch pointbeyond the rear drive wheels; EXCLUDING machines equipped with Rockshaft Swivel


635 Side-Pull Rotary Mower-ConditionerEquipment for Base Machine



List PriceSuggested

USD ($)

HITCHES ...Continued...Hitches. See "Attachments - Order as Desired" or Agricultural Sales Manual for additionalordering information.

2500 Clevis Hitch with Standard TongueClevis Hitch with Standard Tongue and 1000 RPM Tractor Hookup,ASAE Category 4, 1-3/8 In. Diameter PTO ShaftCANNOT be converted to Rockshaft Swivel Hitch.

In Base Price

2510 Ball-Joint Hitch and Slip-On Drawbar Extension with Standard Tongue-540 RPM TractorHookupBall-Joint Hitch and Slip-On Drawbar Extension with Standard Tongue and1000 RPM Tractor Hookup, ASAE Category 4, 1-3/8 In. Diameter PTO ShaftCANNOT be converted to Rockshaft Swivel Hitch.

353.00

2520 Rockshaft Swivel Hitch and TongueRockshaft Swivel Hitch and tongue with 1000 RPM Tractor Hookup,ASAE Category 4, 1-3/8 In. Diameter PTO ShaftCode 2520 is for Category 2 or 3N, three-point hitch with or without Quik-Coupler. IncludesDownstop Chain. CANNOT be converted to Standard Tongue.

1,927.00





351.00

PACKAGES


Code 1000 will automatically be added along with the associated incremental pricing.Requires manual selection from the Hitch; Tires and Wheels; Cutterbar Angle; and RearPowerline sections.

In Configuration


Code 1010 will automatically be added along with the associated incremental pricing.Requires manual selection from the Hitch; Tires and Wheels; Cutterbar Angle; and RearPowerline sections.

In Configuration

0921 1000 RPM V10 Steel Roll Conditioner PackageCode 1025 will automatically be added along with the associated incremental pricing.Requires manual selection from the Hitch; Tires and Wheels; Cutterbar Angle; and RearPowerline sections.

In Configuration






List PriceSuggested

USD ($)

CONDITIONER ...Continued...

1010 Urethane Roll Conditioner93 In. Long with recessed intermittent Cleats - 10 In. Diameter.Quick-Adjust Roll Spacing.Adjustable Roll Pressure independent of Float Pressure.

1,854.00


2,681.00



758.00




The Wide Swath Kit consists of a series of six steel fins that are bolted to the bottom side of theswath board and is designed to spread the swath wider than the base configuration of themachine.

232.00

8305 Roll Conditioner - Windrow Distribution KitThe Wide Swath Kit consists of a series of eight steel fins that are bolted to the bottom side ofthe swath board and is designed to spread the swath wider than the base configuration of themachine.

232.00










List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...CC104769 Gauge Shoe Extension - Four Required

Used to increase maximum cutting height.Also requires the following items from Parts for installation:


33.65


for Ball-Joint HitchUsed to convert standard tongue with 1000 RPM Clevis Hitch.

739.20

BE10058 PTO Driveline, 1-3/8 In. 1000 RPM Telescoping Tractor Hookupfor Clevis HitchUsed to convert standard tongue with 1000 RPM Ball-Joint Hitch and Drawbar Extension.

739.20

BE32031 PTO Driveline, 1-3/8 In. 1000 RPM Telescoping Tractor Hookupfor Swivel Hitch

645.70


1,719.30

BE32033 Rear PTO Driveline, 1000 RPM with Standard U-Joints for Standard Tongue 806.30

BE32035 Rear PTO Driveline, 1000 RPM with Standard U-Joints for Swivel Tongue 806.30


809.60


809.60





Gearcase must match RPM of tractor hookup.Also requires BE10056, 1000 RPM tractor hookup for Ball-Joint Hitch.Used to convert standard tongue with 1000 RPM Clevis Hitch.

642.40

BE31153 Clevis HitchGearcase must match RPM of tractor hookup.Also requires BE10058, 1000 RPM tractor hookup for Clevis Hitch.Used to convert standard tongue with Ball-Joint Hitch and Drawbar Extension.

227.70


11.49





List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE23622 Rubber Drawbar Shield 57.20




38.99


142.49





9 Ft. 9 In. (3 m) Cutting WidthLow-Profile, Modular Cutterbar Made of





Ball-Joint Hitch and Slip-On DrawbarExtension with Standard Tongue

1000 RPM ASAE Category 5 TelescopingHookup with Sliding Collar forTractors with 1-3/8 In. Diameter

PTO ShaftOverrunning Driveline3-V Power Band Belt DriveNo-Tools Cutterbar Flotation AdjustmentScrew-Type JackNo-Tools Forming Shield AdjustmentAdjustable Cutterbar Angle - TurnbuckleTwo Wheels with 11L X 15,

8 PR Hi-Flotation TiresTransport Lock (Tongue)Hydraulic Cylinders (Both Lift and Pivot)Hydraulic Platform Cylinder LockoutsSMV SignFlashing Warning LightsSafety Chain



List PriceSuggested

USD ($)


BASE MACHINE2160E 830 Center-Pivot Rotary Mower-Conditioner 34,143.00

DESTINATION





Same Price


Same Price

PACKAGES



In Configuration


830 Center-Pivot Rotary Mower-ConditionerEquipment for Base Machine



List PriceSuggested

USD ($)

PACKAGES ...Continued...0901 1000 RPM Impeller Conditioner Package


In Configuration



In Configuration

0911 1000 RPM Urethane Roll Conditioner PackageCodes 1010 and 1500 will automatically be added along with the associated incrementalpricing for each.Requires manual selection from the Hitch; Tires and Wheels; and Cutterbar Angle sections.

In Configuration

0922 540 RPM V10 Steel Roll Conditioner PackageOrder Code 1025 and 1510 will automatically be added along with the associated incrementalpricing. Requires manual selection from Swivel Hitch section and Cutterbar Angle Adjustmentsection.

In Configuration

0921 1000 RPM V10 Steel Roll Conditioner PackageOrder Code 1025 and 1500 will automatically be added along with the associated incrementalpricing. Requires manual selection from Swivel Hitch section and Cutterbar Angle Adjustmentsection.

In Configuration



1,558.00


2,216.00

HOOKUPMower-Conditioner is shipped with Gearcase positioned to match the PTO Hookup ordered.

Gearcase speed CANNOT be converted.

1500 1000 RPM Tractor Hookup, ASAE Category 5, 1-3/8 In. Diameter PTO Shaft In Base Price


286.00

TONGUE AND HITCHTurn Limiters, order code 9000 or 9001, may be required for tractors having a hitch point


830 Center-Pivot Rotary Mower-ConditionerContinued



List PriceSuggested

USD ($)

TONGUE AND HITCH ...Continued...beyond the rear drive wheels; EXCLUDING machines equipped with Rockshaft SwivelHitches. See "Attachments - Order as Desired" or Agricultural Sales Manual for additionalordering information.

2500 Ball-Joint Hitch and Slip-On Drawbar Extension with Standard Tongue1) Code 2500 includes a 10,000 lb. (45kN) Safety Chain to be used as anAuxiliary Attaching System to the tractor.2) CANNOT be converted to Rockshaft Swivel Hitch.

In Base Price

2520 Rockshaft Swivel Hitch and Tongue1) Code 2520 is for Category 2 or 3N, three-point hitch with or without Quik-Coupler.2) Includes Downstop Chain.3) CANNOT be converted to Drawbar Ball-Joint Hitch.

1,613.00



ANGLE ADJUSTMENT5000 Turnbuckle Cutterbar Angle Adjustment In Base Price


357.00


The Wide Swath Kit consists of a series of steel fins that are bolted to the bottom side of theswath board and is designed to spread the swath wider than the base configuration of themachine.

232.00

8305 Roll Conditioner - Windrow Distribution KitThe Wide Swath Kit consists of a series of steel fins that are bolted to the bottom side of theswath board and is designed to spread the swath wider than the base configuration of themachine.

232.00









List PriceSuggested

USD ($)




DC200311 Cutting Angle Adjustment, Turnbuckle Top Link 202.63



33.65

DrivelinesBE31142 Universal Driveshaft, 1000 RPM Hookup

For 630, 635, 830, 835 Models.For use with 6R tractors that utilize the quick hitch and 2 pt.

809.60


809.60




Hitch and DrawbarPM03015 Quick Hitch Bushing - Two Required

To adapt swivel hitch for use with quik-coupler.11.49





38.99


142.49





11 Ft. 6 In. (3.5 m) Cutting WidthLow-Profile, Modular Cutterbar


7 Shear-Protected CuttingDisks with Replaceable HeatTreated Inserts

Two Reversible Cutting Knivesper Disk





1000 RPM ASAE Category 5 TelescopingHookup with Sliding Collar for

Tractors with 1-3/8 In. DiameterPTO Shaft

Overrunning Driveline3-V Power Band Belt DriveNo-Tools Forming Shield AdjustmentScrew-Type JackNo-Tools Forming Shield AdjustmentAdjustable Cutterbar Angle - TurnbuckleTwo Wheels with 11L X 15,




List PriceSuggested

USD ($)


BASE MACHINE2170E 835 Center-Pivot Rotary Mower-Conditioner 37,262.00

DESTINATION





Same Price


Same Price

PACKAGES





List PriceSuggested

USD ($)

PACKAGES ...Continued...


Code 1000 will automatically be added along with the associated incremental pricing.Requires manual selection from the Hitch; Tires and Wheels; and Cutterbar Angle sections.

In Configuration



In Configuration

0921 1000 RPM V10 Steel Roll Conditioner PackageCode 1025 will automatically be added along with the associated incremental pricing.Requires manual selection from the Hitch; Tires and Wheels; Cutterbar Angle; and RearPowerline sections.

In Configuration


1010 Urethane Roll Conditioner93 In. Long with recessed intermittent Cleats - 10 In. Diameter.Quick-Adjust Roll Spacing.Adjustable Roll Pressure independent of Float Pressure.

1,888.00


2,714.00

TONGUE AND HITCHTurn Limiters, order code 9000 or 9001, may be required for tractors having a hitch pointbeyond the rear drive wheels; EXCLUDING machines equipped with Rockshaft SwivelHitches. See "Attachments - Order as Desired" or Agricultural Sales Manual for additionalordering information.


In Base Price


1,613.00







List PriceSuggested

USD ($)



357.00


The Wide Swath Kit consists of a series of steel fins that are bolted to the bottom side of theswath board and is designed to spread the swath wider than the base configuration of themachine.

232.00

8305 Roll Conditioner - Windrow Distribution KitThe Wide Swath Kit consists of a series of steel fins that are bolted to the bottom side of theswath board and is designed to spread the swath wider than the base configuration of themachine.

232.00





CutterbarBE32040 Cutting Angle Adjustment, Hydraulic Tilt Control 726.00

BE32041 Cutting Angle Adjustment, Hydraulic Tilt ControlRequires separate selective control valve. Total of three SCVs are required for operation.

737.00

DC200311 Cutting Angle Adjustment, Turnbuckle Top Link 202.63



33.65

DrivelinesBE31142 Universal Driveshaft, 1000 RPM Hookup


809.60





List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE31141 Universal Driveshaft, 540 RPM Hookup


809.60




Hitch and DrawbarPM03015 Quick Hitch Bushing - Two Required

To adapt swivel hitch for use with quik-coupler.11.49





38.99


142.49




Impeller Conditioner11 Ft. 6 In. (3.5 m) Cutting WidthLow-Profile, Modular Cutterbar


7 Shear-Protected CuttingDisks with Replaceable HeatTreated Inserts

Two Reversible Cutting Knivesper Disk





1000 RPM ASAE Category 5 TelescopingHookup with Sliding Collar for

Tractors with 1-3/8 In. DiameterPTO Shaft

Overrunning Driveline3-V Power Band Belt DriveNo-Tools Forming Shield AdjustmentScrew-Type JackNo-Tools Forming Shield AdjustmentAdjustable Cutterbar Angle - TurnbuckleTwo Wheels with 11L X 15,



List PriceSuggested

USD ($)


BASE MACHINE2171E 835 Center-Pivot Rotary Mower-Conditioner PR 37,262.00

DESTINATION





Same Price

PACKAGES



In Configuration



835 Center-Pivot Rotary Mower-Conditioner PREquipment for Base Machine



List PriceSuggested

USD ($)

CONDITIONER ...Continued...

TONGUE AND HITCHTurn Limiters, order code 9000 or 9001, may be required for tractors having a hitch pointbeyond the rear drive wheels; EXCLUDING machines equipped with Rockshaft SwivelHitches. See "Attachments - Order as Desired" or Agricultural Sales Manual for additionalordering information.


In Base Price


1,613.00





357.00


835 Center-Pivot Rotary Mower-Conditioner PRContinued


Impeller conditioner - Urethane, V10 steel orTri-Lobe steel roll optionalCenter-pivot design4.0 m (13 ft) cutting widthLow-profile, modular cutterbar made ofhigh-strength nodular iron castings8 shear-protected cutting disks with replaceableheat treated insertsTwo reversible cutting knives per diskReplaceable skid plate under each cutting diskMechanical drive1000 RPM ASAE Category 5 telescoping tractorhookup with lock back collar for tractors with 1.59cm (1-3/8 in.) diameter power take-off (PTO) shaftOverrunning driveline3-V power band belt driveTwo wheels with 12.5L x 15, 8PR hi-flotation tiresRight-hand and left-hand adjustable gauge shoesQuick-adjust platform floatSwivel hitch (compatible with Category 2 or 3N,

three-point hitch with or without quik-coupler)Adjustable cutterbar angleHydraulic cylinders (both lift and pivot)Adjustable swathboardTransport lock (tongue)Platform cylinder locksSlow-moving vehicle (SMV) signTransport warning lightsImpeller Conditioner:Two-speed conditioner drive4-V power band belt drive72 V-shaped tinesLever adjustable conditioning hood



List PriceSuggested

USD ($)



1435E 946 Center-Pivot Rotary Mower-Conditioner 43,185.00

DESTINATION



OPERATOR'S MANUAL, DECALS, AND LANGUAGE0409 English (United States and Canada ONLY) In Base Price

0443 English/Spanish (United States ONLY)English and Spanish operator manual and bilingual decals.

Same Price

0413 French (Canada ONLY)French operator manual and text free decal.

Same Price

PACKAGES0901 Impeller conditioner package

Order Code 1000 will automatically be added along with the associated incremental pricing.Requires manual selection from swivel hitch section and cutterbar angle adjustment section.

In Configuration

0911 Urethane roll conditioner packageOrder Code 1010 will automatically be added along with the associated incremental pricing.

In Configuration





List PriceSuggested

USD ($)

PACKAGES ...Continued...Requires manual selection from swivel hitch section and cutterbar angle adjustmentsection.Order Code 1010 will automatically be added along with the associated incrementalpricing. Requires manual selection from swivel hitch section and cutterbar angle adjustmentsection.

0921 V-10 steel roll conditioner packageOrder Code 1025 will automatically be added along with the associated incremental pricing.Requires manual selection from swivel hitch section and cutterbar angle adjustment section.

In Configuration

0931 Tri-Lobe steel roll conditioner packageOrder Code 1030 will automatically be added along with the associated incremental pricing.Requires manual selection from swivel hitch section and cutterbar angle adjustment section.

In Configuration

CONDITIONER1000 Impeller conditioner In Base Price

1010 Urethane roll conditioner2680 mm (106 in.) long with recessed intermittent cleats - 254 mm (10 in.) diameterQuick-adjust roll spacingAdjustable roll pressureCushioned roll stops4-V power band belt driveGear and shaft driven conditioner rolls

1,834.00

1025 V10 steel roll conditioner2680 mm (106 in.) long with ten intermeshing flutes in V-pattern - 254 mm (10 in.) diameter4-V powerband belt to gearcaseShaft drive to conditionerQuick-adjust roll spacingAdjustable roll pressureCushioned roll stops

2,775.00

1030 Tri-Lobe steel roll conditioner2680 mm (106 in.) long with three continuous contact intermeshing flutes - 254 mm (10 in.)diameter4-V powerband belt to gearcaseShaft drive to conditionerQuick-adjust roll spacingAdjustable roll pressureCushioned roll stops

12,417.00

SWIVEL HITCH2500 Rockshaft swivel hitch for tractor with 3.49 cm (1-3/8 in.) diameter power take-off (PTO)

shaft1) For Category 2 or 3N, three-point hitch with or without quik-coupler.2) Safety chain not required.3) CANNOT be converted to drawbar swivel hitch.4) To convert to 4.44 cm (1-3/4 in.) diameter PTO shaft order the following items from Parts:1 - AE56235 Yoke1 - AC15878 Cross and bearing assembly

In Base Price

2510 Drawbar swivel hitch for tractor with 3.49 cm (1-3/8 in.) diameter power take-off (PTO) shaft1) Includes a 45 kN (10,000 lb) safety chain to be used as an auxiliary attaching system to thetractor.2) CANNOT be converted to rockshaft swivel hitch.3) To convert to 4.44 cm (1-3/4 in.) diameter PTO Shaft order the following items from Parts:1 - AE56235 Yoke1 - AC15878 Cross and bearing assembly

Same Price





List PriceSuggested

USD ($)

SWIVEL HITCH ...Continued...

ANGLE ADJUSTMENT5000 Turnbuckle top link with adjusting wrench In Base Price

5020 Hydraulic tilt controlRequires separate selective control valve (SCV). Total of three SCVs are required foroperation.

360.00

HITCHES9005 Hose support for quik-coupler

Helps to prevent damage to hoses when using quik-coupler.105.00



ConditionerAE54912 Lower Roll Shield

1) Helps prevent wrapping of lower roll in heavy, viney type crops such as Cali or Star Grass.2) Also requires the following items from Parts for installation:

2-19M7788 Hex Head Flange Bolt (M12 X 25)2-E63527 Spinlock Nut (M12)2-03M7197 Carriage Bolt (M12 X 25)

679.96


Requires separate selective control valve. Three SCVs are required when machine is equippedwith Hydraulic Tilt Control.

732.60

BE32040 Cutting Angle Adjustment, Hydraulic Tilt Control 726.00

BE23921 Cutting Angle Adjustment, Turnbuckle Top Link 310.20

BE32526 Service Side Sheet KitReplacement Side Sheet for 946, 995 Mower Condititoners.

453.20


453.20


146.30

BE32534 Service Side Sheet Kit - LHReplacement Side Sheet for 946 and 956 Mowers.

442.20





List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32525 Service Side Sheet Kit -RH

Replacement Side Sheet for 946 and 956 Mowers.442.20

Driveline Conversions - To 1-3/4 In. 1000 RPM from 1-3/8 In. 1000 RPMSee Service Parts to confirm application. In case of conflicting information, Service Partsinformation supersedes that below.

AE56235 Front Yoke with Lockback Collar, 1-3/4 In. 1000 RPMRequires AC15878, U-Joint Assembly from Parts.

506.77



393.30


HITCHESBE23877 Hose support for quik-coupler

Helps to prevent damage to hoses when using quik-coupler.Helps to prevent damage to hoses when using Quik-Coupler.

115.50




38.99


142.49




Impeller conditioner or V10 steel rollsCenter-pivot design4.0 m (13 ft) cutting widthLow-profile, modular cutterbar made ofhigh-strength nodular iron castings8 shear-protected cutting disks with replaceableheat treated insertsTwo reversible cutting knives per diskReplaceable skid plate under each cutting diskMechanical drive1000 RPM ASAE Category 5 telescoping tractorhookup with lock back collar for tractors with 1.59cm (1-3/8 in.) diameter power take-off (PTO) shaftOverrunning driveline3-V power band belt driveTwo wheels with 12.5L x 15, 8PR hi-flotation tiresRight-hand and left-hand adjustable gauge shoesQuick-adjust platform floatSwivel hitch (compatible with Category 2 or 3N,

three-point hitch with or without quik-coupler)Adjustable cutterbar angleHydraulic cylinders (both lift and pivot)Adjustable swathboardTransport lock (tongue)Platform cylinder locksSlow-moving vehicle (SMV) signTransport warning lightsImpeller Conditioner:Two-speed conditioner drive4-V power band belt drive72 V-shaped tinesLever adjustable conditioning hood



List PriceSuggested

USD ($)



1436E 946 Center-Pivot Rotary Mower-Conditioner PR 43,185.00

DESTINATION





Same Price

PACKAGES

Rotary Mower-Conditioner PR Packages0850 1000 RPM impeller conditioner package

Code 1000 will automatically be added along with the associated incremental pricing.Requires manual selection from the hitch, tires and wheels, and cutterbar angle sections.

In Configuration





List PriceSuggested

USD ($)

PACKAGES ...Continued...0851 1000 RPM steel roll conditioner package


In Configuration



2,775.00



In Base Price


Same Price



360.00




Impeller conditioner - Urethane, V10 steel orTri-Lobe steel roll optionalCenter-pivot design4.5 m (14 ft 6 in.) cutting widthLow-profile, modular cutterbar made ofhigh-strength nodular iron castings9 shear-protected cutting disks with replaceableheat treated insertsTwo reversible cutting knives per diskReplaceable skid plate under each cutting diskMechanical drive1000 RPM ASAE Category 5 telescoping tractorhookup with lock back collar for tractors with 1.59cm (1-3/8 in.) diameter power take-off (PTO) shaftOverrunning driveline3-V power band belt driveTwo wheels with 31 X 13.5 - 15, 8 PR hi-flotationtiresRight-hand and left-hand adjustable gauge shoesQuick-adjust platform float

Swivel hitch (compatible with Category 2 or 3N,three-point hitch with or without quik-coupler)Adjustable cutterbar angleHydraulic cylinders (both lift and pivot)Adjustable swathboardTransport lock (tongue)Platform cylinder locksSlow-moving vehicle (SMV) signTransport warning lightsImpeller Conditioner:Two-speed conditioner drive4-V power band belt drive72 V-shaped tinesLever adjustable conditioning hood



List PriceSuggested

USD ($)



1445E 956 Center-Pivot Rotary Mower-Conditioner 50,150.00

DESTINATION




0443 English/Spanish (United States ONLY)English and Spanish operator manual and bilingual decals.

Same Price


Same Price

PACKAGES0901 Impeller conditioner package

Order Code 1000 will automatically be added along with the associated incremental pricing.Requires manual selection from swivel hitch section and cutterbar angle adjustment section.

In Configuration

0911 Urethane roll conditioner packageOrder Code 1010 will automatically be added along with the associated incremental pricing.

In Configuration





List PriceSuggested

USD ($)

PACKAGES ...Continued...Requires manual selection from swivel hitch section and cutterbar angle adjustmentsection.Order Code 1010 will automatically be added along with the associated incrementalpricing. Requires manual selection from swivel hitch section and cutterbar angle adjustmentsection.

0921 V-10 steel roll conditioner packageOrder Code 1025 will automatically be added along with the associated incremental pricing.Requires manual selection from swivel hitch section and cutterbar angle adjustment section.

In Configuration

0931 Tri-Lobe steel roll conditioner packageOrder Code 1030 will automatically be added along with the associated incremental pricing.Requires manual selection from swivel hitch section and cutterbar angle adjustment section.

In Configuration


1010 Urethane roll conditioner2680 mm (106 in.) long with recessed intermittent cleats - 254 mm (10 in.) diameterQuick-adjust roll spacingAdjustable roll pressureCushioned roll stops4-V power band belt driveGear and shaft driven conditioner rolls

392.00


1,340.00

1030 Tri-Lobe steel roll conditioner2680 mm (106 in.) long with three continuous contact intermeshing flutes - 254 mm (10 in.)diameter4-V powerband belt to gearcaseShaft drive to conditionerQuick-adjust roll spacingAdjustable roll pressureCushioned roll stops

10,983.00



In Base Price


Same Price





List PriceSuggested

USD ($)

SWIVEL HITCH ...Continued...



360.00

HITCHES9005 Hose support for quik-coupler

Helps to prevent damage to hoses when using quik-coupler.105.00




1) Helps prevent wrapping of lower roll in heavy, viney type crops such as Cali or Star Grass.2) Also requires the following items from Parts for installation:


679.96


Requires separate selective control valve. Three SCVs are required when machine is equippedwith Hydraulic Tilt Control.

732.60

BE23921 Cutting Angle Adjustment, Turnbuckle Top Link 310.20


453.20


453.20


146.30

BE32534 Service Side Sheet Kit - LHReplacement Side Sheet for 946 and 956 Mowers.

442.20

BE32525 Service Side Sheet Kit -RHReplacement Side Sheet for 946 and 956 Mowers.

442.20





List PriceSuggested

USD ($)




506.77



393.30


HITCHESBE23877 Hose support for quik-coupler

Helps to prevent damage to hoses when using quik-coupler.Helps to prevent damage to hoses when using Quik-Coupler.

115.50




38.99


142.49




Impeller conditioner - Urethane, V10 steel orTri-Lobe steel roll optionalCenter-pivot design4.5 m (14 ft 6 in.) cutting widthLow-profile, modular cutterbar made ofhigh-strength nodular iron castings9 shear-protected cutting disks with replaceableheat treated insertsTwo reversible cutting knives per diskReplaceable skid plate under each cutting diskMechanical drive1000 RPM ASAE Category 5 telescoping tractorhookup with lock back collar for tractors with 1.59cm (1-3/8 in.) diameter power take-off (PTO) shaftOverrunning driveline3-V power band belt driveTwo wheels with 31 X 13.5 - 15, 8 PR hi-flotationtiresRight-hand and left-hand adjustable gauge shoesQuick-adjust platform float

Swivel hitch (compatible with Category 2 or 3N,three-point hitch with or without quik-coupler)Adjustable cutterbar angleHydraulic cylinders (both lift and pivot)Adjustable swathboardTransport lock (tongue)Platform cylinder locksSlow-moving vehicle (SMV) signTransport warning lightsImpeller Conditioner:Two-speed conditioner drive4-V power band belt drive72 V-shaped tinesLever adjustable conditioning hood



List PriceSuggested

USD ($)



1446E 956 Center-Pivot Rotary Mower-Conditioner PR 50,150.00

DESTINATION





Same Price

PACKAGES

Rotary Mower-Conditioner PR Packages0850 1000 RPM impeller conditioner package


In Configuration

CONDITIONER





List PriceSuggested

USD ($)

CONDITIONER ...Continued...1000 Impeller conditioner In Base Price



In Base Price


Same Price



360.00




3-Point Hitch (Cat. 1 & 2)540 PTO Drive5-ft 3-in (1.60-m) Cut Width4-Disc Cutterbar with ExternallyRemovable Drive Disk BearingsLow Profile CutterbarOpen-Style Cutterbar EndOuter Swath Wheel

Hydraulic Lift

For Additional Operator Protection From Thrown Objects, it is Recommended that the R160 Rotary Disc Mower be used with tractors having an operatorenclosure.


List PriceSuggested

USD ($)


BASE MACHINEEX-WORKS Point of entry Dealers must order and have shipped in multiples of two.

2220E R160 Disc Mower (4 Discs) 8,942.00

DESTINATION



OPERATOR'S MANUAL AND DECALS0409 English Operator Manual In Base Price

0443 Spanish Operator Manual Same Price

0413 French Operator Manual Same Price

0437 Export - Spanish Operator ManualWith text free Decals.

Same Price


CutterbarAE55688 High Skid Shoe Kit

Requires (2) for new installation only.170.68


R160 Disc Mower (4 Discs)Equipment for Base Machine



R160 Disc Mower (4 Discs)Continued



3-Point Hitch (Cat. 1 & 2)540 PTO Drive6-ft 7-in (2.00-m) Cut Width5-Disc Cutterbar with ExternallyRemovable Drive Disk BearingsLow Profile CutterbarOpen-Style Cutterbar EndOuter Swath Wheel

Hydraulic Lift



List PriceSuggested

USD ($)




DESTINATION







Same Price







3-Point Hitch (Cat. 2)540 PTO Drive7-ft 11-in (2.40-m) Cut Width6-Disc Cutterbar with ExternallyRemovable Drive Disk BearingsLow Profile CutterbarOpen-Style Cutterbar EndOuter Swath Wheel

Hydraulic Lift



List PriceSuggested

USD ($)




DESTINATION







Same Price




Hitch and DrawbarE92926 Extended Left Hand Hitch Pin 130.25

AE79200 Rear-swing Hydraulic Cylinder 1,076.17





Hydraulic Lift



List PriceSuggested

USD ($)




DESTINATION







Same Price









John Deere PSS 4.5L FT4 engineTurbo-Charged 4 cylinder rated 155 hp, bulge of175 hpFinal Tier 4 emissionsHydrostatic Ground Drive 3 SpeedPlanetary Final DrivesVariable Drive MotorTransport: 0 to 23 mph (0 to 37 km/h)Field (Cab Forward): 0 to 16 mph (0 to 26 km/h)Drive Tires: 18.4 x 26 ButtonRear Tires: 16.5L - 16.1 Forked Casters,Adjustable Width Rear AxleTwo Exterior Rear View Mirrors andOne Interior Rear View MirrorHydraulic CenterlinkHydraulic Platform LiftSpring Platform FloatFine Float Adjustable from the CabAdjustable Cutting Angle

CAB FEATURES:Reversible Operator StationLarge Approach Landing to Cab with Movable ServicePlatforms with Large Integrated ToolboxTilt Steering WheelHeater/Air ConditionerAutomatic Parking BrakeAdjustable Air Suspension Seat and Seat BeltTraining Seat with Seat BeltCAN-BUS Electrical SystemGreenStar ReadyArmrest Display: Warning Monitor with 2 LineDisplay and ControlsDigital Display of:Engine RPMGround SpeedTraction Unit HoursEngine HoursBelt SpeedKnife SpeedReel SpeedAnalog Display of:Fuel LevelEngine TemperatureMaster Control Lever:Ground Speed Forward/ReversePlatform Raise/Lower, TiltReel Raise Lower, Fore AftAuto Trac Resume SwitchRadio Ready with Two Speakers, Wiring and AntennaSingle-Blade Windshield WiperFront and RearExterior Lighting:Seven Forward Cab Mounted Headlamps

Two Side Floodlamps Cab Mounted,Two Additional Floodlamps on Rear of MachineWarning BeaconsHydraulic Service AccessHydraulic Valves and FiltersElectric Control Service CabinetAccess to Fuses and RelaysRotary Wand Air Screen12-Volt Electrical System with 130 Amp AlternatorTwo 700 CCA Batteries97 Gallon (367 L) Fuel TankAnti-FreezeHydraulic OilTurn SignalsFlashing Warning LightsHydraulic System and Couplers to Attach 400DDraper PlatformsLess Couplers for 100A Auger PlatformsAXLE WEIGHTS:Weight in lbs, with weight box (recommendedconfiguration for towing all drapers 30 ft. orlarger), Full fuel and DEF, Bar Drive Tires andForked 16.5-16.1 Castor Tires, Castors spun IN:Front Axle: 10019 lbsRear Axle: 4861 lbsTotal: 14880 lbsWeight in lbs, with weight box (recommendedconfiguration for towing all drapers 30 ft. orlarger), Full fuel and DEF, Bar Drive Tires andForked 16.5-16.1 Castor Tires, Castors spun OUT:Front Axle: 11030 lbsRear Axle: 3850 lbsTotal: 14880 lbsWeight in lbs, with 16' Auger attached- max axleweight following recomended transport procedures,Full fuel and DEF, Bar Drive Tires and Forked16.5-16.1 Castor Tires, Castors spun IN:Front Axle: 13883 lbsRear Axle: 4193 lbsTotal: 18076 lbsWeight in lbs, with 16' Auger attached- max axleweight following recomended transport procedures,Full fuel and DEF, Bar Drive Tires and Forked16.5-16.1 Castor Tires, Castors spun OUT:Front Axle: 14745 lbsRear Axle: 3331 lbsTotal: 18076 lbs


List PriceSuggested

USD ($)


BASE MACHINEEX-WORKS Winnipeg, MB or Port of Entry

BALLASTING & FLOAT SPRING RECOMMENDATIONS:For more information on float springs and ballasting recommendations, please see machineoperator manual and Ag Sales manual.


W155 Turbo-Diesel Self-Propelled Windrower Traction UnitEquipment for Base Machine



List PriceSuggested

USD ($)

BASE MACHINE ...Continued...4040E W155 Turbo-Diesel Self-Propelled Windrower Traction Unit

Compatible with MY13 and Newer 100A and 400D Platforms Only.157,876.00

DESTINATION



OPERATOR'S MANUAL AND DECALS0409 English (U.S./Canada ONLY)



Same Price

0443 English/Spanish (U.S. ONLY)English and Spanish operator manual and text free decals.

Same Price

DRIVE WHEELS AND TIRES3000 600-65R28 Radial Bar Tires

Recommended for best ride quality and for muddy conditions and draper use in small grains.3,219.00

3010 18.4-26 Bar TiresNot recommended with 40 Ft. Draper Platform or 35 Ft. with double knife and split reel.

429.00

3020 23.1-26 Button TiresRecommended for minimum turf damage on hay crops.

2,016.00

3030 18.4-26 Button TiresRecommended for minimum turf damage on hay crops. Not recommended with 40 Ft. DraperPlatform or 35 Ft. with double knife and split reel.

In Base Price

TAIL WHEELS AND TIRES3100 16.5L - 16.1 Tires and Forked Casters

Recommended for best ride quality and for muddy conditions.In Base Price

3110 10 x 16 Tires and Forked Casters -416.00

3120 7.5 - 16 SL Tires and Formed CastersRecommended for easier to change tire compared to forked caster and less interference withwindrow.

-800.00

3130 10 x 16 Tires and Formed CastersRecommended for easier to change tire compared to forked caster and less interference withwindrow.

-1,065.00

RECEIVER


W155 Turbo-Diesel Self-Propelled Windrower Traction UnitContinued



List PriceSuggested

USD ($)

RECEIVER ...Continued...1840 StarFire 6000 Receiver - SF1

Provides access to the no-charge SF1 differential correction signal. SF1 provides +/- 15 cm(+/- 6 in) horizontal pass-to-pass accuracy.

Use of this service, and all rights and obligations of John Deere and the Customer (asidentified in the applicable agreement), are governed by the terms and conditions outlined inthe applicable Services and Software agreements available atwww.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do notproceed and do not use the service.

3,895.00

1841 StarFire 6000 Receiver - SF3Includes StarFire 6000 SF3 Ready Activation. SF3 provides +/- 3 cm (1.2 in) horizontalpass-to-pass accuracy with in-season repeatability (where applicable). An SF3 Subscriptionis required to use SF3 differential corrections. Purchase through www.StellarSupport.com.See Ag Sales Manual for additional information.

7,895.00

1842 StarFire 6000 Receiver - SF3 with 1 year SF3 SubscriptionIncludes StarFire 6000 SF3 Ready Activation and 1 Year SF3 Subscription. SF3 provides +/- 3cm (1.2 in) horizontal pass-to-pass accuracy with in-season repeatability (where applicable).See Ag Sales Manual for additional information.


8,945.00

1843 StarFire 6000 Receiver - SF3 and RTK (Modem/Radio Not Included)Includes StarFire 6000 SF3 Ready Activation and StarFire 6000 RTK Ready Activation. RTKprovides +/- 2.5 cm (1 in) horizontal pass-to-pass accuracy with long-term repeatability. RTKfunctionality requires access to differential corrections from an RTK base station andadditional hardware or subscriptions may be required.

11,395.00

1844 Less StarFire 6000 Receiver In Base Price

DISPLAYThis is an optional secondary display (GreenStar 3 2630) for mounting on corner post. Thissecondary display is not supported on the corner post when the GS3 2630 is mounted on theCommandARM (Ultimate Cab package, code 1300).

1820 Less GreenStar 3 2630- corner post mount In Base Price

1825 GreenStar 3 2630 - corner post mountIncludes:GS3 2630 DisplayMounting Bracket.

6,319.00

AUTOTRAC KIT1880 Less AutoTrac Kit In Base Price

1881 AutoTrac KitIncludes:Hydraulic AutoTrac KitAutoTrac Controller KitUniversal Receiver Mounting Kit.

5,831.00

AUTOTRAC ACTIVATIONS





List PriceSuggested

USD ($)

AUTOTRAC ACTIVATIONS ...Continued...1845 Less AutoTrac Activations - GS3 In Base Price

1847 AutoTrac Activation - GS3 3,500.00

PIVOT PRO ACTIVATION184A Less Pivot Pro Activation - GS3 In Base Price

184B Pivot Pro Activation - GS3Pivot Pro Activation - GS3 also requires an AutoTrac Activiation - GS3 to enable.

1,495.00

FRAME AND CHASSIS9004 Booster Spring Kit External (Includes 2 Springs and Hardware)

Booster spring kits are required for all 180A Auger Headers and many 25 Ft. and largerDraper Header configurations. Refer to the Float Spring Requirements in Sales Manual forrequirements.

348.00

9006 Light Platform Floatation KitRequired for 415D. Extension bracket for spring to reduce float. Refer to the Float SpringRequirements in Sales Manual for requirements.

205.00

9013 Engine Fan BaffleReduces windrow disturbance caused by engine cooling fan blast. Recommended for reducingdust or crop disturbance for extended intervals between cleaning the rear screen and airfilters.

151.00

9090 Windrow Merger Attachment for W150 or W155Dealer Installed. Recommended for 140A and 160A auger platforms and 425D Ft. andnarrower under draper platforms. Requires hay conditioner on draper platforms on to transfercrop to belt on double windrow attachment.

11,787.00

9001 Centerlink Vertical-Alignment KitAdditional cylinder to raise and lower the center link for faster and easier attaching of theplatform. Highly recommended for commercial operators and customers who attach anddetach the platform for transport frequently. Compatible with W150/W155 ONLY. Notcompatible with W110.

288.00

9002 Pressure Sensor KitGives indication of capacity when operating in tough conditions to maximize machineproductivity. Compatible with W150/W155 ONLY. Not compatible with W110. Allowsmonitoring of hydraulic platform drive pressures as follows: Knife or Reel circuit on DraperPlatform, Knife/Conditioner circuit on Auger Platform.

402.00

9003 Reverser - W150 or W155 OnlyRecommended with hay conditioner on draper platforms. Compatible with W150 and W155ONLY. Not compatible with W110. Includes valve and plumbing. Reverses Knife, and optionalconditioner on 400D Draper Platforms, (does not reverse reel or draper belt) Reverses Knife,Auger, Reel, and Conditioner on 100A Auger Platforms.

1,290.00

9005 Booster Spring Kit- Internal (includes 1 spring)Booster spring kits are required for all 180A Auger Headers and many 25 Ft. and largerDraper Header configurations. Refer to the Float Spring Requirements in Sales Manual forrequirements.

211.00

LIGHTING9018 HID Auxiliary Front Lighting - Includes Two Lights

Mounts to rear view mirror brackets.1,191.00





List PriceSuggested

USD ($)

LIGHTING ...Continued...

9012 Lighting/Marking Kit for Cab Forward Road Travel on W150/W155Kit is required for cab forward road travel on W150/W155. The lighting does not meet theRussia GOST standards and is not available in Russia.

381.00

CAB EQUIPMENT9007 Windshield Shades (Includes Front and Rear Shades)

Recommended to reduce glare from sun off front windshield during early morning and lateafternoon operation.

324.00


Frame and ChassisBE32362 Booster Spring Kit External (Includes 2 Springs and Hardware)

Booster spring kits are required for all 180A Auger Headers and many 30 Ft. and largerDraper Header configurations. Refer to the Float Spring Requirements in Sales Manual forrequirements.

276.89

BE32359 Centerlink Vertical-Alignment KitAdditional cylinder to raise and lower the center link for faster and easier attaching of theplatform. Highly recommended for commercial operators and customers who attach anddetach the platform for transport frequently. Compatible with W150 ONLY. Not compatiblewith W110.

230.09

BE32371 Engine Fan BaffleReduces windrow disturbance caused by engine cooling fan blast. Recommended for reducingdust or crop disturbance for extended intervals between cleaning the rear screen and airfilters.

120.12

BE32364 Light Platform Floatation KitRequired for 415D. Extension bracket for spring to reduce float. Refer to the Float SpringRequirements in Sales Manual for requirements.

163.80

BE32360 Pressure Sensor KitGives indication of capacity when operating in tough conditions to maximize machineproductivity. Compatible with W150 ONLY. Not compatible with W110. Allows monitoring ofhydraulic platform drive pressures as follows: Knife or Reel circuit on Draper Platform,Knife/Conditioner circuit on Auger Platform.

318.24

BE32361 Reverser - W150 or W155 OnlyRecommended with hay conditioner on draper platforms. Compatible with W150 or W155ONLY. Not compatible with W110.Reverses Knife, and optional conditioner on 400D Draper Platforms, (does not reverse reel ordraper belt)Reverses Knife, Auger, Reel, and Conditioner on 100A Auger Platforms.

1,026.48

BE32428 Windrow Merger Attachment for W150Dealer Installed. Recommended for 160A auger platforms and 425D Ft. and narrower underdraper platforms. Requires hay conditioner on draper platforms on to transfer crop to belt ondouble windrow attachment.

9,359.21

LightingBE32376 HID Auxiliary Front Lighting - Includes Two Lights

Mounts to rear view mirror brackets.945.36





List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32370 Lighting/Marking Kit for Cab Forward Road Travel

Kit is required for cab forward road travel. In base equipment on W110 - cab forwardonly. Not compatible with export markets outside of the US/Canada/Mexico. The lighting alsodoes not meet the Russia GOST standards.

304.20

Operator EnvironmentSWJHD1120 Jensen AM/FM/WB Heavy Duty Stereo

W110 and W150 Windrowers are pre-wired with 2 speakers, antenna, and wiring for easyinstallation of the radio as desired. The wiring is DIN "E" style for power and speakerconnections with standard AM/FM antenna connection. Jensen heavy duty radio optionsrecommended. Requires adapter harness SW31100103. See Parts Expert for more information.

167.99

SWJHD3620 Jensen AM/FM/WB/CD/USB Satellite & iPod Ready StereoW110 and W150 Windrowers are pre-wired with 2 speakers, antenna, and wiring for easyinstallation of the radio as desired. The wiring is DIN "E" style for power and speakerconnections with standard AM/FM antenna connection. Jensen heavy duty radio optionsrecommended. Requires adapter harness SW31100103. See Parts Expert for more information.

319.99

SWJHD1620 Stereo with AM/FM, Weatherband, SIRIUS Satellite and iPod ReadyW110 and W150 Windrowers are pre-wired with 2 speakers, antenna, and wiring for easyinstallation of the radio as desired. The wiring is DIN "E" style for power and speakerconnections with standard AM/FM antenna connection. Jensen heavy duty radio optionsrecommended. Requires adapter harness SW31100103. See Parts Expert for more information.

249.99




Equipment for Base Traction Unit:

ENGINE:6-Cylinder Turbo-Charged John Deere PowerTech PVSEngine6.8 L (414 Cu. In.) Displacement175 kW (235 Hp) @ 2400 RPM (rated)190 kW (255 Hp) @ 2200 RPM (peak)Final Tier IV emissions compliantElectronic fuel injection and shut offAir-to-air aftercooledDry type air cleanerRotary screen air intake with vacuum pickupAir scoop cooling technology

TRANSMISSION:Hydrostatic Ground DrivePlanetary double reduction final driveGear Ratio: 36.8:1Dual Speed Drive MotorField: 0-25.7 km/h (0-16 mph)Transport: 0-33.8 km/h (0-21 mph)Automatic Parking Brake

WHEELS AND TIRES:Drive Tires: 580/85R38 155A8 (R1) radial bar tiresRear Tires: 14L x 16.1 8PR Rib TiresAdjustable rear axle widthIntelliAxle - independent rear suspension andsteering assist

ECONOMY CAB FEATURES:Air suspension operator seat with seat beltFore-aft attenuationTraining seat with seat belt12% LT tinted rear windowSingle-blade windshield wiperSingle tilt telescoping steering wheelHeater/air conditioner with automatic temperaturecontrolPremium upholstery and storageInterior rear view mirrorExterior rear view mirror2 manual, foldableLarge cup holdersAuxiliary power outlet stripRadio readyBusiness band radio ready

CONTROLS AND INSTRUMENTATION:CommandARM armrest:GS3 CommandCenter color display,18 cm (7 in) non-touchVehicle and platform controls and diagnosticsinformationCommandCenter display scroll wheel and buttonkeypadPlatform enable/disable switchPlatform float pressure adjust knobPlatform speed adjust knobTransmission gear selectEngine speed selectTemperature controlsWorklight switches (if equipped)Rotating beacon switchHazard light switchGreenStar ReadyIntegrated AutoTracJDLink EnabledMTG and antenna installed

Multi-function hydrostat handle:Ground speed forward/reversePlatform presetsAutoTrac resumePlatform raise/lower, tilt

Merger enable/disable (if equipped)Merger position (if equipped)Right-Hand Cornerpost Display:General Machine Information:Stop, alarm, info indicators2Engine power meterEngine coolant tempPark indicatorTurn signalsExhaust filter cleaning indicatorFuel gaugeHigh beam indicatorDEF gaugeEngine RPMGround speedRotary Platform Specific Information:Platform speedFloat pressureSelected presetCorner post display ready:Wired for GS3 2630 and ethernetConstant Header Speed platform control

LIGHTING:Front: 6 halogen cab mountedRear: 2 halogen frame mountedFlashing warning lightsRotating beacon lights (2)Turn signalsAuxiliary side worklight ready

ELECTRICAL:12-V electrical system240 amp alternator12-V heavy-duty batteryRemote electrical posts for powering fuel nursetankFuse bankCAN bus communication system

FRAME AND CHASSIS:Tapered main frameRockshaft platform liftHydraulically adjustable platform floatHydraulically adjusted cutting angleHeavy-duty hydraulic motor for platformIndependent left/right platform float adjustmentWindrow merger attachment readyFull composite gull-wing doorsLarge toolbox/storage compartmentHydraulic service cabinet for hydraulic valvesRigid 4th step for cab access

VEHICLE:568L (150 gal) fuel tank26.5 L (7 gal) DEF tank94.5 L (25 gal) hydraulic oil reservoir2.7 kg (6.0 lb) R134a refrigerant49.2 L (13.7 gal) anti-freezeSlow Moving Vehicle emblemLESS PLATFORMCompatible with 994 (4m and 4.5m), 995 and 500Rrotary platforms and 525D, 530D, and 536D draperplatformsAXLE WEIGHTS:Without Platform, full fuelFront Axle: 4698 kg (10357 lb)Rear Axle: 2605 kg (5743 lb)Total: 7303 kg (16100 lb)


W235 Self-Propelled Windrower Traction UnitEquipment for Base Machine



List PriceSuggested

USD ($)



BALLASTING RECOMMENDATIONS:For more information on ballasting recommendations, please visit the Ag Sales Manual.

4021E W235 Self-Propelled Windrower Traction UnitCompatible with 525D, 530D, 536D, 994 (4m and 4.5m), 995, and 500R Platforms Only.

154,646.00

DESTINATION



OPERATOR'S MANUAL AND DECALS0409 English (U.S. / Canada / Australia / New Zealand ONLY)

English operator manual and decals.In Base Price

0413 French (Canada ONLY)French operator manual and decals.

Same Price


Same Price

DRIVE WHEELS AND TIRES3000 520/85R38 155A8 (R1) Radial Bar Tires


3020 480/80R38 149A8 (R1) Radial Bar TiresRequired for W235 and W260 with 994 (4m) platform to keep wheel track within platformwidth and not run over uncut crop. Should NOT be used with 994 (4.5M), 995, or 500Rplatform due to exceeding maximum load rating of the tire.

-1,576.00

3030 650/75R32 172B (R1W) Radial Bar TiresRecommended for best ride quality and for muddy conditions.

4,212.00

3035 24.5R32 159A8/B (R3) Radial Button TireRecommended for minimum turf damage on hay crops.

536.00

TAIL WHEELS AND TIRES3170 14L x 16.1 8PR Rib Tires

Required for use with RCI merger option.In Base Price


W235 Self-Propelled Windrower Traction UnitContinued



List PriceSuggested

USD ($)

TAIL WHEELS AND TIRES ...Continued...3180 16.5L x 16.1 8PR Rib Tires

NOT compatible with RCI merger due to clearance issues with merger frame.878.00

RECEIVER1840 StarFire 6000 Receiver - SF1



3,895.00


7,895.00



8,945.00


11,395.00


DISPLAYThis is an optional secondary display (GreenStar 3 2630)for mounting on corner post. This secondary display is not supportedon the corner post when the GS3 2630 is mountedon the CommandARM (Ultimate Cab package, code 1300).

1820 Less GreenStar 3 2630 - corner post mount In Base Price

1825 GreenStar 3 2630 - corner post mountIncludes:GreenStar 3 2630 26-cm (10-In.) Display (touchscreen)Ethernet harnessDisplay harnessMounting bracket - BPF10277 - GreenStar Display Cornerpost Bracket - S-Series Combines.

6,319.00

AUTOTRAC ACTIVATIONS1845 Less AutoTrac Activations - GS3 In Base Price





List PriceSuggested

USD ($)

AUTOTRAC ACTIVATIONS ...Continued...1847 AutoTrac Activation - GS3 3,500.00


184B Pivot Pro Activation - GS3Pivot Pro Activation - GS3 also requires an AutoTrac Activation - GS3 to enable.

1,495.00

CONNECTIVITY188U JDLink Hardware only - Subscription Not Included

Includes JDLink hardware: integrated cab wiring harness, antenna, modular telematicsgateway (MTG), Ethernet harnesses, and Machine Communication Radio antenna harness.Ethernet harnesses may vary per configuration.Does not include a JDLink Subscription, Machine Communication Radio and antenna.Requires subscription for JDLink functionality. Subscription availability through dealers thatmeet New Model Qualification requirements. Subscription sales process may vary by country.Available for customers who do not choose to use the JDLink service and dealers that do notmeet New Model Qualification requirements.

In Base Price

188N JDLink Connect Upgrade 1 Year plus JDLink Access + RDA 5 Year subscriptionIncludes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription, 1 yearJDLink Connect Upgrade subscription, 5 years JDLink Access + RDA subscription (5 totalyears subscription), Ethernet harnesses, and Machine Communication Radio antenna harness.Does not include the Machine Communication Radio and antenna. Note: When GreenStar 32630 Display is mounted on cornerpost, Ethernet cable (order from Service parts) is requiredto connect Display to MTG.

Use of this service, and all rights and obligations of John Deere and the Customer (asidentified in the applicable agreement), are governed by the terms and conditions outlined inthe applicable Services and Software agreements available atwww.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do notproceed and do not use the service. Only available through dealers that meet New ModelQualification requirements.

No Charge

188S JDLink Connect 5 Year subscriptionIncludes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription, 5 yearJDLink Connect subscription, Ethernet harnesses, and Machine Communication Radioantenna harness. Does not include the Machine Communication Radio and antenna. Note:When GreenStar 3 2630 Display is mounted on cornerpost, Ethernet cable (order from Serviceparts) is required to connect Display to MTG.

Use of this service, and all rights and obligations of John Deere and the Customer (asidentified in the applicable agreement), are governed by the terms and conditions outlined inthe applicable Services and Software agreements available atwww.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do notproceed and do not use the service. Only available in the United States, Canada, Australia,and New Zealand through dealers that meet New Model Qualification requirements.

1,600.00

OPERATOR'S STATION1000 Economy Operator Station

Includes:Radio ready with 2 pre-wired speakers and antenna;GS3 CommandCenter 18-cm (7-In.) display (non touchscreen);Standard seat with air suspension;6 halogen front lights;2 exterior rear view mirrors, manual adjust;Single tilt/telescoping steering column;Single-blade windshield wiper;

In Base Price





List PriceSuggested

USD ($)

OPERATOR'S STATION ...Continued...Premium upholstery and storage;Business band ready

1100 Standard Operator StationIncludes:Standard AM/FM/WB/CD radio;GS3 CommandCenter 18-cm (7-In.) display (touchscreen);Premium seat with lateral attenuation and low frequency suspension;8 halogen front lights;2 exterior rear view mirrors, manual adjust;Dual tilt/telescoping steering column;Footrests;Dual-blade windshield wiper;Premium upholstery and storage;Business band ready

4,561.00

1200 Premium Operator StationIncludes:Premium AM/FM/WB/XM/CD/Bluetooth radio with subwoofer and armrest controls;GS3 CommandCenter 18-cm (7-In.) display (touchscreen);Premium seat with lateral attenuation and low frequency suspension;4 halogen front lights and 4 LED front lights;2 exterior rear view mirrors, power adjust;Dual tilt/telescoping steering column;Footrests;Dual-blade windshield wiper;Premium upholstery and storage;Front and rear sunshade;Active refrigerator;Business band ready

9,568.00

1300 Ultimate Operator StationIncludes:Premium AM/FM/WB//XM/CD/Bluetooth radio with subwoofer and armrest controls;GS3 2630 on CommandARM 26-cm (10-In.) display (touchscreen);Premium seat with lateral attenuation and low frequency suspension;4 halogen front lights and 4 HID front lights;2 exterior rear view mirrors, power adjust;Dual tilt/telescoping steering column;Footrests;Dual-blade windshield wiper;Large storage bin;Fascia styling;Front and rear sunshade;Active refrigerator;Business band ready

15,627.00

LIGHTING9785 Auxiliary Side Lighting Kit

Includes four halogen lights and mounting hardware: two lights each on left and right catwalkhand rail.

332.00

FRAME AND CHASSIS8002 Tool Box

Removable toolbox, mounts to left hand catwalk.154.00

FRAME AND CHASSIS





List PriceSuggested

USD ($)

FRAME AND CHASSIS ...Continued...9295 Flexible 4th Step

Includes step, flexible mounts, and hardware to add 4th step toW200 Series windrowers. Flexible 4th step substituted inbase for rigid 4th step if selected.

175.00


ALLIED SUPPLIER INFORMATIONDRAPER PLATFORMS:2016 W235 or W260 traction units come from the factory fully compatible with the 500DDraper Platform and no additional kits are required to purchase.Note: To put a 500D on a 2014 or 2015 W200 rotary traction unit additional compatibility kitsare required. See the 500D ag sales manual or price pages for complete details oncompatibility kits required for 2014 or 2015 W200 windrowers and ordering information.

FOR WINDROW MERGER ATTACHMENT CONTACT:RCI Engineering LLC970 Metalcraft DriveMayville, WI 53050Telephone: (toll free) (888) 472-4552Telephone: (920) 387-9804Fax: (920) 387-9806Email: [email protected]: www.RCIengineering.com

WEIGHT BOX FOR TRANSPORT OF W200 SERIES WINDROWERS WITHOUT APLATFORM ATTACHED CONTACT:RCI Engineering LLC970 Metalcraft DriveMayville, WI 53050Telephone: (toll free) (888) 472-4552Fax: (920) 387-9806Email: [email protected]: www.RCIengineering.com

Refer to the Agricultural Sales Manual For Additional Information.POWERGARD PROTECTION PLAN AVAILABLE:Refer to Pathways/Sales/Marketing Tools/PowerGard Protection for options and pricing.


EngineSWDEF110VKIT 110V Pump Kit

Allows pump to connect to portable dispensing units, totes anddrums; 4' suction hose with closed system dry-break coupler;20' discharge hose with stainless steel automatic shutoff nozzle;pump has built in motor over-heating protection with an internal170 degree F thermal overload switch; automatic reset; pumpdelivers 7-10GPM; 5-year pump warranty; kit includes a closedsystem valve and dip tube for a 55-gal drum.

858.57





List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...SWDEF12VKIT 12V Pump Kit


852.86

SWDEF025 2.5 gal jug of John Deere Diesel Exhaust Fluid11.75 x 9.5 x 7.6"; 25lbs. Full.

0.00

SWDEFPDU20T 20gal Portable Dispensing Unit with lockable, hinged lidIncludes forklift/strap guide accessible feet; 12V self-primingdiaphragm pump; 20' dispensing hose with stainless steel,auto shutoff nozzle with swivel; pump delivers 7-10GPM; DEFport will only accept the appropriate DEF nozzle and will notaccept diesel nozzle mishaps; pump is easily removed foruse with totes and drums; rust resistant powder coat finish (gray);view strip easily allows operator to monitor DEF levels;outside dimensions: 36"W x 18"D x 22"H.

1,680.00

SWDEF275 275gal tote of John Deere Diesel Exhaust FluidIncludes drop tube/valve; 39.4 x 47.2 x 45.75"2750lbs. Full; Micromatic EPV and Butterfly valve.

0.00


0.00

SWDEF055 55gal drum of John Deere Diesel Exhaust FluidDoes not include drop tube/valve; 23.5 x 35"; 550lbs. Full.

0.00


1,864.00

FRAME AND CHASSISBE32493 Flexible 4th Step


192.50

Frame and ChassisAH170596 Fire Extinguisher Mounting Bracket

Required to mount AH184159 Fire Extinguisher.Also order 14M7518 (qty 3), 19m7804 (qty 3),and M131711 (qty 3) to complete mounting.

91.19

AT184159 Fire Extinguisher, ABC Dry Chemical (U.S. and Canada) 92.75





List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32600 Independent Float - Field Installed

This kit is intended for MY14 W235 (Rotary Configuration) machines to add independent floatfor improved functionality and operation with regards to adjusting float independently.

1,600.50

BE32484 Tool BoxRemovable toolbox, mounts to left hand catwalk.

185.90

LIGHTINGBE32485 Auxiliary Side Lighting Kit


365.20

TiresBE32554 Rear Tire 16.5L X 16.1 8PR Rib 1,717.10




Equipment for Base Traction Unit:ENGINE:6-Cylinder Twin Turbo-Charged John Deere PowerTechPSS Engine6.8 L (414 Cu. In.) Displacement194 kW (260 Hp) @ 2400 RPM (rated)213 kW (285 Hp) @ 2200 RPM (peak)Final Tier IV emissions compliantElectronic fuel injection and shut offAir-to-air aftercooledDry type air cleanerRotary screen air intake with vacuum pickupAir scoop cooling technology

TRANSMISSION:Hydrostatic Ground DrivePlanetary double reduction final driveGear Ratio: 36.8:1Dual Speed Drive MotorField: 0-25.7 km/h (0-16 mph)Transport: 0-33.8 km/h (0-21 mph)Automatic Parking Brake

WHEELS AND TIRES:Drive Tires: 580/85R38 155A8 (R1) radial bar tiresRear Tires: 14L x 16.1 8PR Rib TiresAdjustable rear axle widthIntelliAxle - independent rear suspension andsteering assist

ECONOMY CAB FEATURES:Air suspension operator seat with seat beltFore-aft attenuationTraining seat with seat belt12% LT tinted rear windowSingle-blade windshield wiperSingle tilt telescoping steering wheelHeater/air conditioner with automatic temperaturecontrolPremium upholstery and storageInterior rear view mirrorExterior rear view mirror2 manual, foldableLarge cup holdersAuxiliary power outlet stripRadio readyBusiness band radio ready

CONTROLS AND INSTRUMENTATION:CommandARM armrest:GS3 CommandCenter color display, 18 cm (7 in)non-touchVehicle and platform controls and diagnosticsinformationCommandCenter display scroll wheel and buttonkeypadPlatform enable/disable switchPlatform float pressure adjust knobPlatform speed adjust knobTransmission gear selectEngine speed selectTemperature controlsWorklight switches (if equipped)Rotating beacon switchHazard light switchGreenStar ReadyIntegrated AutoTracJDLink EnabledMTG and antenna installedMulti-function hydrostat handle:Ground speed forward/reversePlatform presetsAutoTrac resumePlatform raise/lower, tiltMerger enable/disable (if equipped)Merger position (if equipped)

Right-Hand Cornerpost Display:General Machine Information:Stop, alarm, info indicatorsEngine power meterEngine coolant tempPark indicatorTurn signalsExhaust filter cleaning indicatorFuel gaugeHigh beam indicatorDEF gaugeEngine RPMGround speedRotary Platform Specific Information:Platform speedFloat pressureSelected presetCorner post display ready:Wired for GS3 2630 and ethernetConstant Header Speed platform control

LIGHTING:Front: 6 halogen cab mountedRear: 2 halogen frame mountedFlashing warning lightsRotating beacon lights (2)Turn signalsAuxiliary side worklight ready

ELECTRICAL:12-V electrical system240 amp alternator12-V heavy-duty batteryRemote electrical posts forpowering fuel nurse tankFuse bankCAN bus communication system

FRAME AND CHASSIS:Tapered main frameRockshaft platform liftHydraulically adjustable platform floatHydraulically adjusted cutting angleHeavy-duty hydraulic motor for platformIndependent left/right platform float adjustmentWindrow merger attachment readyFull composite gull-wing doorsLarge toolbox/storage compartmentHydraulic service cabinet forhydraulic valvesRigid 4th step for cab access

VEHICLE:620 L (150 gal) fuel tank26.5 L (7 gal) DEF tank94.5 L (25 gal) hydraulic oil reservoir2.7 kg (6.0 lb) R134a refrigerant49.2 L (13.7 gal) anti-freezeSlow Moving Vehicle emblemLESS PLATFORMCompatible with 994 (4m and 4.5m), 995 and 500Rrotary platforms and 525D, 530D, and 536D draperplatforms

AXLE WEIGHTS:Without Platform, full fuelFront Axle: 4732 kg (10432 lb)Rear Axle: 2616 kg (5768 lb)Total: 7348 kg (16200 lb)


W260 Self-Propelled Windrower Traction UnitEquipment for Base Machine



List PriceSuggested

USD ($)



BALLASTING RECOMMENDATIONS:For more information on ballasting recommendations, please visit the Ag Sales Manual.

4031E W260 Self-Propelled Windrower Traction UnitCompatible with 525D, 530D, 536D, 994 (4m and 4.5m), 995, and 500R Platforms Only.

166,610.00

DESTINATION



OPERATOR'S MANUAL AND DECALS0409 English (U.S. / Canada / Australia / New Zealand ONLY)



Same Price


Same Price

DRIVE WHEELS AND TIRES3000 520/85R38 155A8 (R1) Radial Bar Tires


3020 480/80R38 149A8 (R1) Radial Bar TiresRequired for W235 and W260 with 994 (4m) platform to keep wheel track within platformwidth and not run over uncut crop. Should NOT be used with 994 (4.5M), 995, or 500Rplatform due to exceeding maximum load rating of the tire.

-1,576.00

3030 650/75R32 172B (R1W) Radial Bar TiresRecommended for best ride quality and for muddy conditions.

4,212.00

3035 24.5R32 159A8/B (R3) Radial Button TireRecommended for minimum turf damage on hay crops.

536.00

TAIL WHEELS AND TIRES3170 14L x 16.1 8PR Rib Tires

Required for use with RCI merger option.In Base Price





List PriceSuggested

USD ($)

TAIL WHEELS AND TIRES ...Continued...3180 16.5L x 16.1 8PR Rib Tires

NOT compatible with RCI merger due to clearance issues with merger frame.878.00

RECEIVER1840 StarFire 6000 Receiver - SF1



3,895.00


7,895.00



8,945.00


11,395.00


DISPLAYThis is an optional secondary display (GreenStar 3 2630)for mounting on corner post. This secondary display is not supportedon the corner post when the GS3 2630 is mountedon the CommandARM (Ultimate Cab package, code 1300).

1820 Less GreenStar 3 2630 - corner post mount In Base Price

1825 GreenStar 3 2630 - corner post mountIncludes:GreenStar 3 2630 26-cm (10-In.) Display (touchscreen)Ethernet harnessDisplay harnessMounting bracket - BPF10277 - GreenStar Display Cornerpost Bracket - S-Series Combines.

6,319.00

AUTOTRAC ACTIVATIONS1845 Less AutoTrac Activations - GS3 In Base Price





List PriceSuggested

USD ($)

AUTOTRAC ACTIVATIONS ...Continued...1847 AutoTrac Activation - GS3 3,500.00


184B Pivot Pro Activation - GS3Pivot Pro Activation - GS3 also requires an AutoTrac Activation - GS3 to enable.

1,495.00

CONNECTIVITY188U JDLink Hardware only - Subscription Not Included

Includes JDLink hardware: integrated cab wiring harness, antenna, modular telematicsgateway (MTG), Ethernet harnesses, and Machine Communication Radio antenna harness.Ethernet harnesses may vary per configuration.Does not include a JDLink Subscription, Machine Communication Radio and antenna.Requires subscription for JDLink functionality. Subscription availability through dealers thatmeet New Model Qualification requirements. Subscription sales process may vary by country.Available for customers who do not choose to use the JDLink service and dealers that do notmeet New Model Qualification requirements.

In Base Price

188N JDLink Connect Upgrade 1 Year plus JDLink Access + RDA 5 Year subscriptionIncludes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription, 1 yearJDLink Connect Upgrade subscription, 5 years JDLink Access + RDA subscription (5 totalyears subscription), Ethernet harnesses, and Machine Communication Radio antenna harness.Does not include the Machine Communication Radio and antenna. Note: When GreenStar 32630 Display is mounted on cornerpost, Ethernet cable (order from Service parts) is requiredto connect Display to MTG.

Use of this service, and all rights and obligations of John Deere and the Customer (asidentified in the applicable agreement), are governed by the terms and conditions outlined inthe applicable Services and Software agreements available atwww.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do notproceed and do not use the service. Only available through dealers that meet New ModelQualification requirements.

No Charge

188S JDLink Connect 5 Year subscriptionIncludes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription, 5 yearJDLink Connect subscription, Ethernet harnesses, and Machine Communication Radioantenna harness. Does not include the Machine Communication Radio and antenna. Note:When GreenStar 3 2630 Display is mounted on cornerpost, Ethernet cable (order from Serviceparts) is required to connect Display to MTG.

Use of this service, and all rights and obligations of John Deere and the Customer (asidentified in the applicable agreement), are governed by the terms and conditions outlined inthe applicable Services and Software agreements available atwww.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do notproceed and do not use the service. Only available in the United States, Canada, Australia,and New Zealand through dealers that meet New Model Qualification requirements.

1,600.00

OPERATOR'S STATION1000 Economy Operator Station

Includes:Radio ready with 2 pre-wired speakers and antenna;GS3 CommandCenter 18-cm (7-In.) display (non touchscreen);Standard seat with air suspension;6 halogen front lights;2 exterior rear view mirrors, manual adjust;Single tilt/telescoping steering column;Single-blade windshield wiper;

In Base Price





List PriceSuggested

USD ($)

OPERATOR'S STATION ...Continued...Premium upholstery and storage;Business band ready

1100 Standard Operator StationIncludes:Standard AM/FM/WB/CD radio;GS3 CommandCenter 18-cm (7-In.) display (touchscreen);Premium seat with lateral attenuation and low frequency suspension;8 halogen front lights;2 exterior rear view mirrors, manual adjust;Dual tilt/telescoping steering column;Footrests;Dual-blade windshield wiper;Premium upholstery and storage;Business band ready

4,561.00

1200 Premium Operator StationIncludes:Premium AM/FM/WB/XM/CD/Bluetooth radio with subwoofer and armrest controls;GS3 CommandCenter 18-cm (7-In.) display (touchscreen);Premium seat with lateral attenuation and low frequency suspension;4 halogen front lights and 4 LED front lights;2 exterior rear view mirrors, power adjust;Dual tilt/telescoping steering column;Footrests;Dual-blade windshield wiper;Premium upholstery and storage;Front and rear sunshade;Active refrigerator;Business band ready

9,568.00

1300 Ultimate Operator StationIncludes:Premium AM/FM/WB//XM/CD/Bluetooth radio with subwoofer and armrest controls;GS3 2630 on CommandARM 26-cm (10-In.) display (touchscreen);Premium seat with lateral attenuation and low frequency suspension;4 halogen front lights and 4 HID front lights;2 exterior rear view mirrors, power adjust;Dual tilt/telescoping steering column;Footrests;Dual-blade windshield wiper;Large storage bin;Fascia styling;Front and rear sunshade;Active refrigerator;Business band ready

15,627.00

LIGHTING9785 Auxiliary Side Lighting Kit


332.00

FRAME AND CHASSIS8002 Tool Box


FRAME AND CHASSIS





List PriceSuggested

USD ($)

FRAME AND CHASSIS ...Continued...9295 Flexible 4th Step


175.00


ALLIED SUPPLIER INFORMATIONDRAPER PLATFORMS:2016 W235 or W260 traction units come from the factory fully compatible with the 500DDraper Platform and no additional kits are required to purchase.Note: To put a 500D on a 2014 or 2015 W200 rotary traction unit additional compatibility kitsare required. See the 500D ag sales manual or price pages for complete details oncompatibility kits required for 2014 or 2015 W200 windrowers and ordering information.

FOR WINDROW MERGER ATTACHMENT CONTACT:RCI Engineering LLC970 Metalcraft DriveMayville, WI 53050Telephone: (toll free) (888) 472-4552Telephone: (920) 387-9804Fax: (920) 387-9806Email: [email protected]: www.RCIengineering.com

WEIGHT BOX FOR TRANSPORT OF W200 SERIES WINDROWERS WITHOUT APLATFORM ATTACHED CONTACT:RCI Engineering LLC970 Metalcraft DriveMayville, WI 53050Telephone: (toll free) (888) 472-4552Fax: (920) 387-9806Email: [email protected]: www.RCIengineering.com

Refer to the Agricultural Sales Manual For Additional Information.POWERGARD PROTECTION PLAN AVAILABLE:Refer to Pathways/Sales/Marketing Tools/PowerGard Protection for options and pricing.


EngineSWDEF110VKIT 110V Pump Kit


858.57





List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...SWDEF12VKIT 12V Pump Kit


852.86

SWDEF025 2.5 gal jug of John Deere Diesel Exhaust Fluid11.75 x 9.5 x 7.6"; 25lbs. Full.

0.00


1,680.00


0.00


0.00

SWDEF055 55gal drum of John Deere Diesel Exhaust FluidDoes not include drop tube/valve; 23.5 x 35"; 550lbs. Full.

0.00


1,864.00

FRAME AND CHASSISBE32493 Flexible 4th Step


192.50

Frame and ChassisAH170596 Fire Extinguisher Mounting Bracket

Required to mount AH184159 Fire Extinguisher.Also order 14M7518 (qty 3), 19m7804 (qty 3),and M131711 (qty 3) to complete mounting.

91.19

AT184159 Fire Extinguisher, ABC Dry Chemical (U.S. and Canada) 92.75





List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32484 Tool Box


LIGHTINGBE32485 Auxiliary Side Lighting Kit


365.20

TiresBE32554 Rear Tire 16.5L X 16.1 8PR Rib 1,717.10




Cutting Width: 14 Ft. 9 In. (4496 mm) 140A,16 Ft. 3 In. (4953 mm) 160A,17 Ft. 9 In. (5410 mm) 180A

Hydraulically Driven with Independent VariableSpeeds of Reel, Auger, and Knife/Conditioner

Timed Dual-Knife Drive withKevlar Reinforced Cogged Belts

Forged Two Tine Guards with AdjustableHold Downs, and Bolt On Sickle Sections

Storage for Extra Knives in Knockdown BarReel:Six-Bat Reel with Enclosed Oval Tube BatsHeavy-Duty Bolt-On Reel SpidersHeavy-Duty, High Density, Wraparound Reel TeethHeavy-Duty Tooth Pipes with Greaseable Ball

BearingsSteel Reel CamSteel Reel TeethAdjustable Reel SpeedHeader Index Automatic Reel Speed Control

with W110 or W150Right Hand and Left Hand Inboard Mounted GaugeShoesSteel Conditioner Rolls102 In. Long, Intermeshing Straight Steel Flutes

with N Bar ProfileAdjustable Roll Spacing and Roll Pressure

Single 20" Auger Crop DeliveryPoly Auger Pan with StrippersDrop Out Area for Soil and Rocks

Between Auger and ConditionerSingle Lever Adjustable Swath BoardFlat Face Hydraulic Quick Coupler Connection

for Compatibility with W110 or W150Hydraulic Quick Couplers for One Power Unit

(W110 or W150)Transport Warning LightsMechanical Reversing Tool

Requires Option 9048 for Forming Shields whichIncludes

Forming Shields with Vanes and AdjustableSide Panels and Fluff BoardForming Shield Attaching Hardware


List PriceSuggested

USD ($)



Compatible with W110, W150, or W155 windrowers. 180A 18' auger platforms are notcompatible with W110 due to power level.

4240E 160A Auger Platform - 16 Ft. (4.9 m)Option code 9048 forming shield kit is required with this base code. Be sure to select this codewithin the optional equipment section.If mounting on a W110, must also order Check Valve to prevent reel movement on startup (partnumber AFH209759).

49,560.00

DESTINATION0202 United States In Base Price


OPERATOR'S MANUAL AND DECALSEnglish Operators Manuals are included with all other languages selected.

0409 English (U.S. / Canada ONLY)English operator manual and text free decals.

In Base Price


Same Price



160A Auger Platform - 16 Ft. (4.9 m)Equipment for Base Machine



List PriceSuggested

USD ($)

OPERATOR'S MANUAL AND DECALS ...Continued...French operator manual and text free decals.

FRAME9090 Windrow Merger Attachment for W150 and W155

Dealer Installed. Recommended for 140A and 160A auger platforms and 425D Ft. andnarrower draper platforms.

11,787.00

MISCELLANEOUS9000 Gauge Rollers (Qty. 2)

Dealer installed. One set can be installed in outboard position only. If desired, orderadditional gauge roller set BE32358 to replace inboard mounted gauge shoes.

1,692.00

9010 Additional Gauge Shoes (Qty. 2)Dealer installed. One set can be installed in outboard position. One set of shoes is factoryinstalled (inboard mounted on all models). Can also be used as replacement sets.

577.00

9040 Tall Crop DividerDealer installed. Includes left and right side crop dividers, hardware, and extensions to raiseknock down bar for harvesting tall crops.

721.00

9048 Forming Shields KitDealer Installed. Includes forming shields and attaching hardware to equip one W110, W150,or W155 windrower. One set required for each 100A platform.Option Code 9048 MUST be ordered for each Auger Platform.

1,272.00

9020 Non Clog Guards 16 Ft.Dealer Installed. It is in addition to or for replacement of pointed guards in base equipment.

2,466.00

9077 Replacement Reel Bat Kit 16 Ft. - 160ADealer Installed. Can also be installed as an additional bat for improved feeding.

1,692.00

BALLASTING RECOMMENDATIONSBallasting weights should be ordered through weight program. For more information onballasting recommendations, please visit the Ag Sales Manual.


Frame and ChassisBE32361 Reverser - W150 or W155 Only

Recommended with hay conditioner on draper platforms. Compatible with W150 or W155ONLY. Not compatible with W110.Reverses Knife, and optional conditioner on 400D Draper Platforms, (does not reverse reel ordraper belt)Reverses Knife, Auger, Reel, and Conditioner on 100A Auger Platforms.

1,026.48


9,359.21


160A Auger Platform - 16 Ft. (4.9 m)Continued



List PriceSuggested

USD ($)


MiscellaneousBE32368 Additional Gauge Shoes (Qty. 2)

Dealer installed. One set can be installed in outboard position. One set of shoes is factoryinstalled (inboard mounted on all models). Can also be used as replacement sets.

464.09

BE32358 Gauge Rollers (Qty. 2)Dealer installed. One set can be installed in outboard position only.

1,347.84

BE32378 Non Clog Guards 16 Ft.Dealer Installed. It is in addition to or for replacement of pointed guards in base equipment.

1,847.04

BE32420 Replacement Reel Bat Kit 16 Ft. - 160ADealer Installed. Can also be installed as an additional bat for improved feeding.

1,342.37

BE32399 Tall Crop DividerDealer installed. Includes left and right side crop dividers, hardware, and extensions to raiseknock down bar for harvesting tall crops.

572.52




Cutting Width: 16 Ft. 3 In. (4953 mm)Hydraulically Driven with Independent Variable

Speeds of Reel, Auger, and KnifeTimed Dual-Knife Drive with

Kevlar Reinforced Cogged BeltsForged Two Tine Not Clog Guards with Adjustable

Hold Downs, and Bolt On Sickle SectionsSickle Sections:

Fine, Over Serrated with Fourteen Serrations perInch

Storage for Extra Knives in Knockdown BarReel:

Seven-Bat Reel with Enclosed Oval Tube BatsHeavy-Duty Bolt-On Reel SpidersHeavy-Duty, High Density, Wraparound Reel TeethHeavy-Duty Tooth Pipes with Greaseable BallBearingsSteel Reel CamSteel Reel TeethAdjustable Reel Speed

Header Index Automatic Reel Speed Controlwith W110 or W150

Right Hand and Left Hand Inboard Mounted GaugeShoesLess Conditioner RollsAdjustable Windrow Opening with Forming RodsSingle 20" Undershot Auger Crop DeliveryPoly Auger Pan with StrippersFlat Face Hydraulic Quick Coupler Connection

for Compatibility with W110 or W150Transport Warning Lights

Requires Option 9000 for outboard Gauge Rollersor Option 9010 for outboard Gauge Shoes


List PriceSuggested

USD ($)




4245E 160A Auger Grass Seed Platform - 16 Ft. (4.9 m)Outboard gauge shoes or gauge rollers are required. Be sure to check code 9000 (rollers) or9010 (shoes) from the optional equipment section.If mounting on a W110, must also order Check Valve to prevent reel movement on startup (partnumber AFH209759).

46,174.00





In Base Price


Same Price


Same Price


160A Auger Grass Seed Platform - 16 Ft. (4.9 m)Equipment for Base Machine



List PriceSuggested

USD ($)

MISCELLANEOUS9000 Gauge Rollers (Qty. 2) 1,692.00

9010 Additional Gauge Shoes (Qty. 2) 577.00


721.00





1,026.48


9,359.21


Dealer installed, outboard position. Can also be used as replacement part for factory installedinboard mounted gauge shoes.

464.09

BE32358 Gauge Rollers (Qty. 2)Dealer installed, outboard position. If desired, order additional gauge roller set BE32358 toreplace inboard mounted gauge shoes.

1,347.84


572.52


160A Auger Grass Seed Platform - 16 Ft. (4.9 m)Continued


Cutting Width: 14 Ft. 9 In. (4496 mm) 140A,16 Ft. 3 In. (4953 mm) 160A,17 Ft. 9 In. (5410 mm) 180A

Hydraulically Driven with Independent VariableSpeeds of Reel, Auger, and Knife/Conditioner

Timed Dual-Knife Drive withKevlar Reinforced Cogged Belts

Forged Two Tine Guards with AdjustableHold Downs, and Bolt On Sickle Sections

Storage for Extra Knives in Knockdown BarReel:Six-Bat Reel with Enclosed Oval Tube BatsHeavy-Duty Bolt-On Reel SpidersHeavy-Duty, High Density, Wraparound Reel TeethHeavy-Duty Tooth Pipes with Greaseable Ball

BearingsSteel Reel CamSteel Reel TeethAdjustable Reel SpeedHeader Index Automatic Reel Speed Control

with W110 or W150Right Hand and Left Hand Inboard Mounted GaugeShoesSteel Conditioner Rolls102 In. Long, Intermeshing Straight Steel Flutes

with N Bar ProfileAdjustable Roll Spacing and Roll Pressure

Single 20" Auger Crop DeliveryPoly Auger Pan with StrippersDrop Out Area for Soil and Rocks

Between Auger and ConditionerSingle Lever Adjustable Swath BoardFlat Face Hydraulic Quick Coupler Connection

for Compatibility with W110 or W150Hydraulic Quick Couplers for One Power Unit

(W110 or W150)Transport Warning LightsMechanical Reversing Tool

Requires Option 9048 for Forming Shields whichIncludes

Forming Shields with Vanes and AdjustableSide Panels and Fluff BoardForming Shield Attaching Hardware


List PriceSuggested

USD ($)




4260E 180A Auger Platform - 18 Ft. (5.5 m)Option code 9048 forming shield kit is required with this base code. Be sure to select this codewithin the optional equipment section.Recommended for use with W150 or W155 windrower. Not compatible with W110 due topower requirement.

50,535.00





In Base Price


Same Price



180A Auger Platform - 18 Ft. (5.5 m)Equipment for Base Machine



List PriceSuggested

USD ($)

OPERATOR'S MANUAL AND DECALS ...Continued...French operator manual and text free decals.

MISCELLANEOUS9000 Gauge Rollers (Qty. 2)

Dealer installed. One set can be installed in outboard position only. If desired, orderadditional gauge roller set BE32358 to replace inboard mounted gauge shoes.

1,692.00

9010 Additional Gauge Shoes (Qty. 2)Dealer installed. One set can be installed in outboard position. One set of shoes is factoryinstalled (inboard mounted on all models). Can also be used as replacement sets.

577.00


721.00

9048 Forming Shields KitDealer Installed. Includes forming shields and attaching hardware to equip one W110, W150,or W155 windrower. One set required for each 100A platform.Option Code 9048 MUST be ordered for each Auger Platform.

1,272.00

9025 Non Clog Guards 18 Ft.Dealer Installed. It is in addition to or for replacement of pointed guards in base equipment.

2,683.00

9080 Replacement Reel Bat Kit 18 Ft. - 180ADealer Installed. Can also be installed as an additional bat for improved feeding.

1,702.00





1,026.48

BE32428 Windrow Merger Attachment for W150 9,359.21


Dealer installed. One set can be installed in outboard position. One set of shoes is factoryinstalled (inboard mounted on all models). Can also be used as replacement sets.

464.09

BE32358 Gauge Rollers (Qty. 2)Dealer installed. One set can be installed in outboard position only.

1,347.84





List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32383 Non Clog Guards 18 Ft.

Dealer Installed. It is in addition to or for replacement of pointed guards in base equipment.2,126.28

BE32421 Replacement Reel Bat Kit 18 Ft. - 180ADealer Installed. Can also be installed as an additional bat for improved feeding.

1,354.08


572.52




Impeller Conditioner - Urethane, V10 Steel, orTri-Lobe Steel Roll Optional13 Ft. (4 m) Cutting Width (8 Disks)Low-Profile, Modular CutterbarMade of High-Strength, Nodular Iron CastingsShear-Protected Cutting Disks with Replaceable,Heat Treated InsertsTwo Free Swinging, Reversible Cutting Knives perDiskShear Protected Modules with Replaceable DriversReversible Direction ModulesReplaceable Skid PlateUnder Each Cutting DiskHydraulically DrivenTwo Adjustable Gauge Shoes

Adjustable Forming ShieldsTransport Warning Lights

Impeller Conditioner:Two-Speed Conditioner Drive4-V Power Band Belt Drive72 V-Shaped TinesLever Adjustable Conditioning Hood


List PriceSuggested

USD ($)


BASE MACHINEEX-WORKS Ottumwa, Iowa. Compatible with W235 (Rotary Traction Unit), W260 (RotaryTraction Unit), R450, or 4995 Windrower ONLY. If attaching R450 to old platform (SN -359999) order wiring harness AFH205053. If adapting 4995 to new platform (SN 360000-)order wiring harness AFH205054 through service parts.

1672E 994 Rotary Platform - 13 Ft. (4 m) 30,698.00

DESTINATION

North America:0202 United States In Base Price




0443 English/Spanish (U.S. ONLY)English and spanish operator manual and bilingual decals.

Same Price


Same Price


1010 Urethane Roll ConditionerRevised roll geometry with adjustable swathboard.106 In. (2680 mm) long with recessed intermittent cleats - 10 In. (254 mm) diameter.Quick-Adjust Roll Spacing. Adjustable Roll Pressure.Cushioned Roll Stops.

Same Price


994 Rotary Platform - 13 Ft. (4 m)Equipment for Base Machine



List PriceSuggested

USD ($)

CONDITIONER ...Continued...4-V Power Band Belt Drive.Gear and Shaft Driven Conditioner Rolls.

1025 V10 Steel Roll ConditionerRevised roll geometry with adjustable swathboard.106 In. (2680 mm) long with ten intermeshing flutes in V-pattern - 10 In. (254 mm) diameter.4-V powerband belt to gearcase.Shaft drive to conditioner.Quick-Adjust Roll Spacing.Adjustable Roll Pressure.Cushioned Roll Stops.

985.00

1030 Tri-Lobe Steel Roll ConditionerRevised roll geometry with adjustable swathboard.106 In. (2680 mm) long with three continuous contact intermeshing flutes - 10 In. (254 mm)diameter.4-V powerband belt to gearcase.Shaft drive to conditioner.Quick-Adjust Roll Spacing.Adjustable Roll Pressure.Cushioned Roll Stops.

10,986.00

FRAME9005 Adjustable Swathboard Bundle (for Impeller Conditioner)

Includes swathboard bundle with complete components to mount on impeller platform. Alsocontains most of the components for the roll platform. BE24278 also needed to install the kiton a roll style conditioner platform. BE24278 plus BE24277 = BE24279.

195.00

9010 Adjustable Swathboard Bundle for Roll Conditioner 497.00



ConditionerE94819 1000 rpm Impeller Conditioner Parts

Must order with E94820.437.36

E94820 1000 rpm Impeller Conditioner PartsMust order with E94819.

331.32

E125066 1000 rpm Roll Conditioner PartsMust order with E98362.

351.85


137.37

AE73791 Crop Deflector for Roll ConditionerAlso order (4) 19M7285 bolts and (4) E63527 nuts.

495.37


994 Rotary Platform - 13 Ft. (4 m)Continued



List PriceSuggested

USD ($)


FRAMEBE24277 Adjustable Swathboard Bundle (for Impeller Conditioner)


214.50

BE24279 Adjustable Swathboard Bundle for Roll Conditioner 546.70




Impeller Conditioner - Urethane, V10 Steel, orTri-Lobe Steel Roll Optional14.5 Ft. (4.5 m) Cutting Width (9 Disks)Low-Profile, Modular CutterbarMade of High-Strength, Nodular Iron CastingsShear-Protected Cutting Disks with Replaceable,Heat Treated InsertsTwo Free Swinging, Reversible Cutting Knives perDiskShear Protected Modules with Replaceable DriversReversible Direction ModulesReplaceable Skid Plate Under Each Cutting DiskHydraulically DrivenTwo Adjustable Gauge Shoes

Adjustable Forming ShieldsTransport Warning Lights

Impeller Conditioner:Two-Speed Conditioner Drive4-V Power Band Belt Drive72 V-Shaped TinesLever Adjustable Conditioning Hood


List PriceSuggested

USD ($)



1675E 994 Rotary Platform - 14.5 Ft. (4.5 m) 33,088.00

DESTINATION






Same Price


Same Price

CONDITIONER1010 Urethane Roll Conditioner

Revised roll geometry with adjustable swathboard.106 In. (2680 mm) long with recessed intermittent cleats - 10 In. (254 mm) diameter.Quick-Adjust Roll Spacing. Adjustable Roll Pressure.Cushioned Roll Stops.4-V Power Band Belt Drive.Gear and Shaft Driven Conditioner Rolls.

Same Price


994 Rotary Platform - 14.5 Ft. (4.5 m)Equipment for Base Machine



List PriceSuggested

USD ($)

CONDITIONER ...Continued...1025 V10 Steel Roll Conditioner

Revised roll geometry with adjustable swathboard.106 In. (2680 mm) long with ten intermeshing flutes in V-pattern - 10 In. (254 mm) diameter.4-V powerband belt to gearcase.Shaft drive to conditioner.Quick-Adjust Roll Spacing.Adjustable Roll Pressure.Cushioned Roll Stops.

985.00


10,986.00

1000 Impeller Conditioner In Base Price



195.00

9010 Adjustable Swathboard Bundle for Roll Conditioner 497.00




Must order with E94820.437.36

E94820 1000 rpm Impeller Conditioner PartsMust order with E94819.

331.32


351.85


137.37

AE73791 Crop Deflector for Roll ConditionerAlso order (4) 19M7285 bolts and (4) E63527 nuts.

495.37


994 Rotary Platform - 14.5 Ft. (4.5 m)Continued



List PriceSuggested

USD ($)




214.50

BE24279 Adjustable Swathboard Bundle for Roll Conditioner 546.70




Impeller Conditioner16 Ft. (5 m) Cutting Width (10 Disks)Low-Profile, Modular Cutterbar Made ofHigh-Strength, Nodular Iron CastingsShear-Protected Cutting Disks with Replaceable,Heat Treated InsertsTwo Free Swinging, Reversible Cutting Knives perDiskShear Protected Modules with Replaceable DriversReversible Direction ModulesReplaceable Skid Plate Under Each Cutting Disk

Hydraulically DrivenTwo Adjustable Gauge ShoesAdjustable Forming ShieldsTransport Warning Lights


List PriceSuggested

USD ($)



1690E 995 Rotary Platform - 16 Ft. (5 m) - Impeller Conditioner 39,041.00

DESTINATION






Same Price


Same Price




195.00


995 Rotary Platform - 16 Ft. (5 m) - Impeller ConditionerEquipment for Base Machine



List PriceSuggested

USD ($)





214.50

MiscellaneousBE32536 Replacement Service Side Sheet

Replacement Service Side Sheet for 995 Rotary Platform.442.20

BE32539 Replacement Service Side SheetReplacement Service Side Sheet for 995 Rotary Platform.

442.20


995 Rotary Platform - 16 Ft. (5 m) - Impeller ConditionerContinued


V10 Steel Conditioner - Urethane,or Tri-Lobe SteelRoll OptionalOvershot cross auger16 Ft. (5 m) Cutting Width (10 Disks)Low-Profile, Modular Cutterbar Made ofHigh-Strength, Nodular Iron CastingsShear-Protected Cutting Disks with Replaceable,Heat Treated InsertsTwo Free Swinging, Reversible Cutting Knives perDiskShear Protected Modules with Replaceable DriversReversible Direction Modules

Replaceable Skid Plate Under Each Cutting DiskHydraulically DrivenTwo Adjustable Outboard Gauge ShoesAdjustable Forming ShieldsAdjustable Swatch BoardTransport Warning Lights


List PriceSuggested

USD ($)



1665E 500R Rotary Platform - 16 Ft. (5 m) 40,566.00

DESTINATION






Same Price


Same Price

CONDITIONER1010 Urethane Roll Conditioner

Revised roll geometry with adjustable swathboard.106 In. (2680 mm) long with recessed intermittent cleats - 10 In. (254 mm) diameter.Quick-Adjust Roll Spacing. Adjustable Roll Pressure.Cushioned Roll Stops.4-V Power Band Belt Drive.Gear and Shaft Driven Conditioner Rolls.

In Base Price

1025 V10 Steel Roll ConditionerRevised roll geometry with adjustable swathboard.

985.00


500R Rotary Platform - 16 Ft. (5 m)Equipment for Base Machine



List PriceSuggested

USD ($)

CONDITIONER ...Continued...106 In. (2680 mm) long with ten intermeshing flutes in V-pattern - 10 In. (254 mm) diameter.4-V powerband belt to gearcase.Shaft drive to conditioner.Quick-Adjust Roll Spacing.Adjustable Roll Pressure.Cushioned Roll Stops.


10,986.00



500R Rotary Platform - 16 Ft. (5 m)Continued


CUTTERBAR:Double or Single Cut Knife System with screwadjustable knife hold-downsFull Width Poly Skid ShoesGUARDS:Pointed Profile/Double Heat Treated Long PointForged Steel Guards

HEIGHT CONTROL AND FEEDING:Rigid Cutterbar with Spring Float41.6 In. Wide (Front to Rear Dimension)Draper Belts with Speed Sensor and Variable SpeedAdjustable Center Opening Width2 Adjustable Outboard Gauge Shoes2 Adjustable Inboard Gauge ShoesSwath Forming Rods (base on 415D with 9 bat reelonly- all others available as option code)

REEL:Large 65 In. Effective diameter Cam reel with 4Position Adjustable Cam ReleaseHeader Index Automatic Reel and/or Draper BeltSpeed ControlHydraulic Reel Position (Fore/Aft and Height)

DRIVES:

Enclosed oil bath knife drive gearcase(s) withKevlar Knife Drive Belt(s)Timed Knife Drives on Dual Knife MachinesVariable Speed Hydraulic Reel Drive MotorVariable Speed Hydraulic Draper Belt Drive Motorswith Ribbed Drive RollersVariable Speed Hydraulic Knife Drive MotorSingle-Point Right Hand Hydraulic connection andError Proof Left Hand Hydraulic Line Connections

MISCELLANEOUS:Road Transport Warning LightsVertical Crop Divider RodsOperator's Manual Holder under Left End Shield

The Above Specifications are Indicative of the BaseFeature Machine only and may Differ if AlternativeOptions/Attachments are Ordered.Pricing and Specifications are Recommended onlyand are Subject to Change without Notice.


List PriceSuggested

USD ($)


BASE MACHINECompatible with W110, W150, or W155 Windrowers ONLY. Not compatible with 4890, 4895,4990, 4995, A400, R450, D450, W235, or W260 models.

4270E 415D - 4.57 m (15 Ft.) Draper Cutting Platform - Dual Knife Drive 9 Bat Plastic Finger ReelCompatible with W110, W150, or W155 Windrowers only.

57,469.00

DESTINATION



OPERATOR'S MANUAL AND DECALS0409 English (U.S. / Canada / Australia / New Zealand ONLY) In Base Price



PACKAGE CONFIGURATIONS


415D - 4.57 m (15 Ft.) Draper Cutting Platform - Dual Knife Drive 9 Bat Plastic FingerReel

Equipment for Base Machine



List PriceSuggested

USD ($)

PACKAGE CONFIGURATIONS ...Continued...0801 Dual Knife Drive 9 Bat Plastic Finger Reel Package - 4.57 m (15 Ft.)

Non clog / Forged Steel Guards;Fine Sections 14 Teeth per Inch;Single Span 9 Bat Reel;Plastic Finger;No Deck Shift, Center Delivery Only;2 Inboard Gauge Shoes;2 Outboard Gauge Shoes;Cutterbar Full Width Poly Skid Shoes;Swath Forming Rods for Center Delivery in Base for 415D with 9 Bat Reel Only

In Configuration

CUTTERBAR9030 Non Clog Guard Kit - 415D

Recommended for on ground cutting and tough cutting conditions. Kit is for replacement ofentire set of non clog guards in base equipment.

2,342.00

DRIVES9044 Auxiliary Vertical Knife Plumbing Kit

Includes quick attach couplers for quickly attaching and removing the vertical knives. Allowsattachment of vertical knife to multiple platforms.

855.00

9029 Double Draper Drive Kit (For Heavy Forage Side Delivery Applications)For heavy forage side delivery applications using deck shift. When used with the Top CropConveying Auger (TCCA), an additional hydraulic kit (BE32419) is required. Not compatiblewith draper extension kit. Not compatible with 425D platform.

2,497.00

9070 Hydraulic Drive Kit - Double Draper & Top Crop Converging AugerHydraulic kit is required to install both Top Crop Conveying Auger & Double Draper Drive ona W110, W150, or W155 Windrower. Not required when installing Top Crop Conveying Augeronly or Double Draper Drive only.

1,093.00

9042 Vertical Knife Mounts - LHDesigned for SABRE or ZIEGLER vertical knife. Includes template, hardware and someplumbing.

1,372.00

9043 Vertical Knife Mounts - RHDesigned for SABRE or ZIEGLER vertical knife. RH includes flow control, template, hardwareand some plumbing.

1,372.00

FEEDING9028 Draper Extension Kit

Recommended for lighter crops to make a more dense windrow. Allows easier harvesting ofcrop. Kit narrows swath opening by 20" (500mm). Not compatible with double draper drive.

442.00

9026 Hay Conditioner with Center Feed SectionThe Hay Conditioner mounts to 30 Ft. and smaller Double Knife Draper Platforms ONLY. Thehay conditioner is compatible with W150 or W155 Windrower ONLY. It is recommended toalso order reverser kit with the hay conditioner.

19,075.00

9045 Steel End Finger Kit for ReelSuggested for tough, down, tangled, or lodged crop conditions. Includes 3 fingers for one endof the reel. One set is needed for each end of the reel.

360.00



Continued



List PriceSuggested

USD ($)

FEEDING ...Continued...9071 Top Crop Conveying Auger - 15 Ft.

When used with the Double Draper Drive, an additional Hydraulic Kit (BE32388) is required.The Top Crop Conveying Auger is not recommended for most crops and conditions.When ordering without double draper drive, case drain kit BE32510 is required.Top Crop Conveying Auger recommended for Windrower use in the followingcrops/conditions:- Tall bulky over-ripe Canola- Any tall heavy forage crop such as sudan or cane crop types, where material flow through theopening is constricted.

3,880.00

FRAME9041 Inboard Gauge Shoes with Poly (set of 2)

Recommended for on ground cutting. Allows closer cutting and helps keep cutterbar out of theground. Set of 2 shoes with poly per bundle. Can order two sets for 435D and 440D, ordersingle set for 415D, 425D, 430D.

693.00

9090 Windrow Merger Attachment for W150/W155Dealer Installed. Recommended for 140A and 160A auger platforms and 425D Ft. andnarrower under draper platforms. Requires hay conditioner with center feed section code 9026on draper platforms on to transfer crop to belt on double windrow attachment.

11,777.00

9095 Wiring Harness and Hitch Pin KitIncludes wiring harness for weight box to attach lighting for platform when operating onpublic roadways.

191.00

9008 Weight Box (With Weight) For Transport Less Platform (U.S., Canada, and Mexico Only)Weight Box required to allow transport without platform attached. Weight Box includes hitchfor towing slow speed transport behind W150/W155 Windrowers. Requires ordering wiringharness and hitch pin kit (option code 9095 or bundle BE32429) for weight box toaccommodate towing draper platform.

1,877.00

BALLASTING RECOMMENDATIONSFor information on ballasting recommendations, please visit the Ag Sales Manual.


CutterbarBE32389 Non Clog Guard Kit - 415D

Recommended for on ground cutting and tough cutting conditions. Kit is for replacement ofentire set of non clog guards.

1,868.09

DrivesBE32403 Auxiliary Vertical Knife Plumbing Kit


684.05

BE32388 Double Draper Drive Kit (For Heavy Forage Side Delivery Applications)For heavy forage side delivery applications using deck shift. When used with the Top CropConveying Auger (TCCA), an additional hydraulic kit (BE32419) is required. Not compatiblewith draper extension kit. Not compatible with 425D platform.

1,988.21



Continued



List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32510 Hose Kit, 400D Draper Platform Case Drain Kit

This case drain kit is required when installing an Upper Cross auger on a platform that is notequipped with the double draper drive kit.

115.44

BE32419 Hydraulic Drive Kit - Double Draper & Top Crop Converging AugerHydraulic kit is required to install both Top Crop Conveying Auger (TCCA) & Double DraperDrive (DDD) on a W110 or W150 Windrower. Not required when installing TCCA only orDDD only.

869.69

BE32401 Vertical Knife Mounts - LHDesigned for SABRE or ZIEGLER vertical knife. Includes template, hardware and someplumbing.

1,092.77

BE32402 Vertical Knife Mounts - RHDesigned for SABRE or ZIEGLER vertical knife. RH includes flow control, template, hardwareand some plumbing.

1,092.77

FeedingBE32387 Draper Extension Kit


353.33

BE32386 Hay Conditioner with Center Feed SectionThe Hay Conditioner mounts to 30 Ft. and smaller Double Knife Draper Platforms ONLY. Thehay conditioner is compatible with W150 Windrower ONLY. It is recommended to also orderreverser kit with the hay conditioner.

15,147.60

BE32404 Steel End Finger Kit for ReelSuggested for tough, down, tangled, or lodged crop conditions. Includes 3 fingers for one endof the reel. One set is needed for each end of the reel.

290.16

BE32381 Swath Forming Rods (Center Delivery)Recommended to make a narrower windrow. Typical for grass seed harvest.

869.69

BE32413 Top Crop Conveying Auger - 15 Ft.When used with the Double Draper Drive, additional Hydraulic Kit (BE32388) is required.The Top Crop Conveying Auger is not recommended for most crops and conditions.When ordering without double draper drive, case drain kit BE32510 is required.Top Crop Conveying Auger recommended for Windrower use in the followingcrops/conditions:- Tall bulky over-ripe Canola- Any tall heavy forage crop such as sudan or cane crop types, where material flow through theopening is constricted.

3,084.89

Frame and ChassisBE32405 Cutterbar Full Width Poly Skid Shoes and Hardware Kit - 415D

Recommended for on ground cutting. Complete replacement kit for shoes included in baseequipment.

682.49

BE32400 Inboard Gauge Shoes with Poly (Set of 2)Recommended for on ground cutting. Allows closer cutting and helps keep cutterbar out of theground. Set of 2 shoes with poly per bundle. Can order two sets for 435D and 440D, ordersingle set for 415D, 425D, 430D.

556.13



Continued



List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32361 Reverser - W150 or W155 Only


1,026.48

BE32367 Weight Box (Less Weight) For Transport Less Platform (Outside of U.S. and Canada Only)Weight Box required to allow transport without platform attached. Weight Box includes hitchfor towing slow speed transport behind W150 Windrowers. Requires ordering wiring harnessand hitch pin kit (option code 9095 or bundle BE32429) for weight box to accommodatetowing draper platform. Requires adding concrete for ballast during set up.

1,378.25

BE32366 Weight Box (With Weight) For Transport Less Platform (U.S. and Canada Only)Weight Box required to allow transport without platform attached. Weight Box includes hitchfor towing slow speed transport behind W150 Windrowers. Requires ordering wiring harnessand hitch pin kit (option code 9095 or bundle BE32429) for weight box to accommodatetowing draper platform.

1,496.81


9,359.21

BE32429 Wiring Harness and Hitch Pin KitIncludes wiring harness for weight box to attach lighting for platform when operating onpublic roadways.

152.88



Continued




Continued



CUTTERBAR:Double or Single Cut Knife System with screwadjustable knife hold-downsFull Width Poly Skid ShoesGUARDS:Pointed Profile/Double Heat Treated Long PointForged Steel Guards

HEIGHT CONTROL AND FEEDING:Rigid Cutterbar with Spring Float41.6 In. Wide (Front to Rear Dimension)Draper Belts with Speed Sensor and Variable SpeedAdjustable Center Opening Width2 Adjustable Outboard Gauge Shoes2 Adjustable Inboard Gauge Shoes

REEL:Large 65 In. Effective diameter Cam reel with 4Position Adjustable Cam ReleaseHeader Index Automatic Reel and/or Draper BeltSpeed ControlHydraulic Reel Position (Fore/Aft and Height)

DRIVES:Enclosed oil bath knife drive gearcase(s) withKevlar Knife Drive Belt(s)

Timed Knife Drives on Dual Knife MachinesVariable Speed Hydraulic Reel Drive MotorVariable Speed Hydraulic Draper Belt Drive Motorswith Ribbed Drive RollersVariable Speed Hydraulic Knife Drive MotorSingle-Point Right Hand Hydraulic connection andError Proof Left Hand Hydraulic Line Connections


The Above Specifications are Indicative of the BaseFeature Machine only and may Differ if AlternativeOptions/Attachments are Ordered.

Pricing and Specifications are Recommended only andare Subject to Change without Notice.


List PriceSuggested

USD ($)




54,314.00

DESTINATION












List PriceSuggested

USD ($)


Pointed Profile / Double Heat Treated Forged Steel;Fine Sections 14 Teeth per Inch;Single Span 6 Bat Reel;Plastic Finger;No Deck Shift, Center Delivery Only;2 Inboard Gauge Shoes;2 Outboard Gauge Shoes;Cutterbar Full Width Poly Skid Shoes

In Configuration



2,342.00



855.00


2,497.00


1,093.00


1,372.00


1,372.00



442.00


19,075.00


360.00

9023 Swath Forming Rods (Center Delivery) 1,093.00



Continued



List PriceSuggested

USD ($)

FEEDING ...Continued...Recommended to make a narrower windrow. Typical for grass seed harvest. Standardequipment on 415D with 9 bat reel only.

9071 Top Crop Conveying Auger - 15 Ft.When used with the Double Draper Drive, an additional Hydraulic Kit (BE32388) is required.The Top Crop Conveying Auger is not recommended for most crops and conditions.When ordering without double draper drive, case drain kit BE32510 is required.Top Crop Conveying Auger recommended for Windrower use in the followingcrops/conditions:- Tall bulky over-ripe Canola- Any tall heavy forage crop such as sudan or cane crop types, where material flow through theopening is constricted.

3,880.00

9056 6 Bat to 9 Bat Reel Conversion Kit - 415DAdds bats to improve feeding in heavy down crop conditions and specialty crops such as grassseed.

2,115.00



693.00


11,777.00


191.00


1,877.00





1,868.09



Continued



List PriceSuggested

USD ($)




684.05


1,988.21

BE32510 Hose Kit, 400D Draper Platform Case Drain KitThis case drain kit is required when installing an Upper Cross auger on a platform that is notequipped with the double draper drive kit.

115.44


869.69


1,092.77


1,092.77

FeedingBE32563 6 Bat to 9 Bat Reel Conversion Kit - 415D

Add bats to improve feeding in heavy down crop conditions and specialty crops such as grassseed.

1,684.80

BE32387 Draper Extension KitRecommended for lighter crops to make a more dense windrow. Allows easier harvesting ofcrop. Kit narrows swath opening by 20" (500mm). Not compatible with double draper drive.

353.33


15,147.60


290.16


869.69



Continued



List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32413 Top Crop Conveying Auger - 15 Ft.

When used with the Double Draper Drive, additional Hydraulic Kit (BE32388) is required.The Top Crop Conveying Auger is not recommended for most crops and conditions.When ordering without double draper drive, case drain kit BE32510 is required.Top Crop Conveying Auger recommended for Windrower use in the followingcrops/conditions:- Tall bulky over-ripe Canola- Any tall heavy forage crop such as sudan or cane crop types, where material flow through theopening is constricted.

3,084.89



682.49


556.13


1,026.48


1,378.25


1,496.81


9,359.21


152.88



Continued




Continued



CUTTERBAR:Double or Single Cut Knife System with ScrewAdjustable Knife Hold-downsFull Width Poly Skid ShoesGUARDS:Pointed profile/double heat trated long pointforged steel guards

HEIGHT CONTROL AND FEEDING:Rigid Cutterbar with Spring Float41.6 In. Wide (Front to Rear Dimension) DraperBelts with Speed Sensor and Variable SpeedAdjustable Center Opening Width2 adjustable outboard gauge shoes0 to 4 adjustable inboard gauge shoes depending onpackage configuration

REEL:Large 65 In. effective diameter Cam reel with 4Position Adjustable Cam ReleaseHeader Index Automatic Reel and/or Draper BeltSpeed ControlHydraulic Reel Position (Fore/Aft and Height)

DRIVES:Enclosed oil bath knife drive gearcase(s) with

Kevlar Knife Drive Belt(s)Timed Knife Drives on Dual Knife MachinesVariable Speed Hydraulic Reel Drive MotorVariable Speed Hydraulic Draper Belt Drive Motorswith Ribbed Drive RollersVariable Speed Hydraulic Knife Drive MotorSingle-Point Right Hand Hydraulic connection andError Proof Left Hand Hydraulic Line Connections


The Above Specifications are Indicative of the BaseFeature Machine only and may Differ if AlternativeOptions/Attachments are Ordered.Pricing and Specifications are Recommended onlyand are Subject to Change without Notice.


List PriceSuggested

USD ($)




61,061.00

DESTINATION












List PriceSuggested

USD ($)


Pointed Profile / Double Heat Treated Forged Steel Guards;Fine Sections 14 Teeth per Inch;Single Span 6 Bat Reel;Plastic Finger;No Deck Shift, Center Delivery Only;2 Inboard Gauge Shoes;2 Outboard Gauge Shoes;Cutterbar Full Width Poly Skid Shoes

In Configuration



3,344.00



855.00


2,497.00


1,372.00


1,372.00



442.00


19,075.00


360.00

9023 Swath Forming Rods (Center Delivery)Recommended to make a narrower windrow. Typical for grass seed harvest. Standardequipment on 415D with 9 bat reel only.

1,093.00

9057 6 Bat to 9 Bat Reel Conversion Kit - 420DAdds bats to improve feeding in heavy down crop conditions and specialty crops such as grass

2,456.00



Continued



List PriceSuggested

USD ($)

FEEDING ...Continued...seed.



693.00


11,777.00


191.00


1,877.00





2,662.92



684.05


1,988.21


1,092.77


1,092.77



Continued



List PriceSuggested

USD ($)



Add bats to improve feeding in heavy down crop conditions and specialty crops such as grassseed.

1,954.68


353.33


15,147.60


290.16


869.69



883.73


556.13


1,026.48


1,378.25


1,496.81


9,359.21



Continued



List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32429 Wiring Harness and Hitch Pin Kit

Includes wiring harness for weight box to attach lighting for platform when operating onpublic roadways.

152.88



Continued




Continued



CUTTERBAR:Double or Single Cut Knife System with ScrewAdjustable Knife Hold-downsFull Width Poly Skid Shoes

GUARDS: Pointed profile/double heat treated longpoint forged steel guards









List PriceSuggested

USD ($)



4290E 425D - 7.62 m (25 Ft.) Draper Cutting Platform - Single Knife Drive 6 Bat Plastic Finger ReelManual Deck ShiftCompatible with W110, W150, or W155 Windrowers only.

56,959.00

DESTINATION







425D - 7.62 m (25 Ft.) Draper Cutting Platform - Single Knife Drive 6 Bat Plastic FingerReel Manual Deck ShiftEquipment for Base Machine



List PriceSuggested

USD ($)

PACKAGE CONFIGURATIONS0810 Single Dual Knife Drive 6 Bat Plastic Finger Reel Package - 25 Ft.

Pointed Profile / Double Heat Treated Forged Steel;Coarse sections 9 teeth per inch;Single Span 6 Bat Reel;Plastic Finger;Manual Deck Shift, Triple Delivery;2 Inboard Gauge Shoes;2 Outboard Gauge Shoes;Cutterbar Full Width Poly Skid Shoes

In Configuration



3,880.00

9081 Spare Knife, One-Piece with Knife Head Coarse Cut - 25 Ft.Compatible with Single Knife platform package 0810 only.

825.00



855.00


1,093.00


1,372.00


1,372.00

9024 Hydraulic Deck Shift Conversion KitAdds deck shift capability to these models: 425D Single Knife, 430D Single Knife, 435D SingleKnife, 435D Double Knife Single Reel and 440D. In base equipment on all other models.

3,539.00



442.00


360.00


1,093.00


425D - 7.62 m (25 Ft.) Draper Cutting Platform - Single Knife Drive 6 Bat Plastic FingerReel Manual Deck Shift

Continued



List PriceSuggested

USD ($)

FEEDING ...Continued...9021 End Swath Deflector Rods (For LH End)

Recommended when using deck shift to reduce windrow laying on the uncut crop.387.00

9022 End Swath Deflector Rods (For RH End)Recommended when using deck shift to reduce windrow laying on the uncut crop.

387.00

9038 6 Bat to 9 Bat Reel Conversion Kit - 425DAdds bats to improve feeding in heavy down crop conditions and specialty crops such as grassseed. 9 bat end shields included with 25' and 30' conversion kits.

2,829.00

9072 Top Crop Conveying Auger - 25 FtWhen used with the Double Draper Drive, an additional Hydraulic Kit (BE32388) is required.The Top Crop Conveying Auger is not recommended for most crops and conditions.When ordering without double draper drive, case drain kit BE32510 is required.Top Crop Conveying Auger recommended for Windrower use in the followingcrops/conditions:- Tall bulky over-ripe Canola- Any tall heavy forage crop such as sudan or cane crop types where material flow through theopening is constricted.

4,448.00



693.00


11,777.00


191.00


1,877.00





3,091.13



Continued



List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32422 Spare Knife, One-Piece with Knife Head Coarse Cut - 25 Ft.

Compatible with Single Knife platform package 0810 only.655.20



684.05


115.44

BE32385 Hydraulic Deck Shift Conversion KitAdds deck shift capability to these models: 425D Single Knife, 430D Single Knife, 435D SingleKnife, 435D Double Knife, 435D Double Knife Single Reel and 440D. In base equipment on allother models.

2,816.57


869.69


1,092.77


1,092.77


Adds bats to improve feeding in heavy down crop conditions and specialty crops such as grassseed.

2,254.20


353.33

BE32379 End Swath Deflector Rods (For LH End)Recommended when using deck shift to reduce windrow laying on the uncut crop.

309.65

BE32380 End Swath Deflector Rods (For RH End)Recommended when using deck shift to reduce windrow laying on the uncut crop.

309.65


290.16


869.69



Continued



List PriceSuggested

USD ($)


When used with the Double Draper Drive, additional Hydraulic Kit (BE32388) is required.The Top Crop Conveying Auger is not recommended for most crops and conditions.When ordering without double draper drive, case drain kit BE32510 is required.Top Crop Conveying Auger recommended for Windrower use in the followingcrops/conditions:- Tall bulky over-ripe Canola- Any tall heavy forage crop such as sudan or cane crop types where material flow through theopening is constricted.

3,555.24



1,084.97


556.13


1,026.48


1,378.25


1,496.81


9,359.21


152.88



Continued




Continued













List PriceSuggested

USD ($)



4295E 425D - 7.62 m (25 Ft.) Draper Cutting Platform - Dual Knife Drive 6 Bat Plastic Finger ReelHydraulic Deck ShiftCompatible with W110, W150, or W155 Windrowers only.

69,683.00

DESTINATION







425D - 7.62 m (25 Ft.) Draper Cutting Platform - Dual Knife Drive 6 Bat Plastic FingerReel Hydraulic Deck Shift




List PriceSuggested

USD ($)

PACKAGE CONFIGURATIONS0811 Dual Knife Drive 6 Bat Plastic Finger Reel Package - 25 Ft.

Pointed Profile / Double Heat Treated Forged Steel Guards;Fine Sections 14 Teeth per Inch;Single Span 6 Bat Reel;Plastic Finger;Hydraulic Deck Shift, Triple Delivery;2 Inboard Gauge Shoes;2 Outboard Gauge Shoes;Cutterbar Full Width Poly Skid Shoes

In Configuration



3,880.00



855.00


1,093.00


1,372.00


1,372.00



442.00


19,075.00


360.00


1,093.00

9021 End Swath Deflector Rods (For LH End)Recommended when using deck shift to reduce windrow laying on the uncut crop.

387.00



Continued



List PriceSuggested

USD ($)

FEEDING ...Continued...


387.00

9038 6 Bat to 9 Bat Reel Conversion Kit - 425DAdds bats to improve feeding in heavy down crop conditions and specialty crops such as grassseed. 9 bat end shields included with 25' and 30' conversion kits.

2,829.00


4,448.00



693.00


11,777.00


191.00


1,877.00





3,091.13

BE32422 Spare Knife, One-Piece with Knife Head Coarse Cut - 25 Ft.Compatible with Single Knife platform package 0810 only.

655.20



Continued



List PriceSuggested

USD ($)




684.05


115.44


869.69


1,092.77


1,092.77


Adds bats to improve feeding in heavy down crop conditions and specialty crops such as grassseed.

2,254.20


353.33


309.65


309.65


15,147.60


290.16


869.69



Continued



List PriceSuggested

USD ($)



3,555.24



1,084.97


556.13


1,026.48


1,378.25


1,496.81


9,359.21


152.88



Continued




Continued



CUTTERBAR:Double or Single Cut Knife System with ScrewAdjustable Knife Hold-downs










List PriceSuggested

USD ($)



4300E 430D - 9.14 m (30 Ft.) Draper Cutting Platform - Single Knife Drive 5 Bat Plastic Finger ReelManual Deck ShiftCompatible with W110, W150, or W155 Windrowers only.

62,561.00

DESTINATION










List PriceSuggested

USD ($)

PACKAGE CONFIGURATIONS0815 Single Dual Knife Drive 5 Bat Plastic Finger Reel Package - 30 Ft.

Pointed Profile / Double Heat Treated Forged Steel Guards;Course Sections 9 Teeth per Inch;Single Span 5 Bat Reel;Plastic Finger;Manual Deck Shift, Triple Delivery;2 Outboard Gauge Shoes

In Configuration



4,561.00

9082 Spare Knife, One-Piece with Knife Head Coarse Cut - 30 Ft.Compatible with Single Knife platform package 0815 only.

1,155.00



855.00


2,497.00


1,093.00


1,372.00


1,372.00


3,539.00



442.00


360.00




Continued



List PriceSuggested

USD ($)



387.00


387.00

9073 Top Crop Conveying Auger - 30 FtWhen used with the Double Draper Drive, an additional Hydraulic Kit (BE32388) is required.The Top Crop Conveying Auger is not recommended for most crops and conditions.When ordering without double draper drive, case drain kit BE32510 is required. Top CropConveying Auger recommended for Windrower use in the following crops/conditions:- Tall bulky over-ripe Canola- Any tall heavy forage crop such as sudan or cane crop types where material flow through theopening is constricted.

6,575.00



693.00


191.00

9053 Cutterbar Full Width Poly Skid Shoes and Hardware Kit - 430DRecommended for on ground cutting. Complete replacement kit for shoes included in baseequipment with package 0816 only.

1,372.00

9085 Gauge WheelsCompatible with 430D, 435D, and 440D models ONLY. With 25 Ft. and narrower draperplatforms, gauge wheels are not compatible or needed. The platform is supported by thetraction unit for off ground cutting and by the gauge shoes for on ground cutting.

3,663.00

9096 Gauge Wheels and Integrated Slow Speed Road Transport SystemCompatible with 430D, 435D, and 440D models ONLY. Do not exceed 25 MPH (40 KPH).

Gauge Wheels / Integrated Slow-speed Transport Package may be towed behind a Windrowerwhen using a weight box.Transport must not exceed 25 mph (40 kph) when being towed. Towing vehicle (W150/W155Windrower or tractor only) must have 7 pin electrical outlet for warning lights and is limitedto 25 mph.

8,277.00


1,877.00




Continued



List PriceSuggested

USD ($)




3,630.89

BE32423 Spare Knife, One-Piece with Knife Head Coarse Cut - 30 Ft.Compatible with Single Knife platform package 0815 only.

918.05

BE32422 Spare Knife, One-Piece with Knife Head Coarse Cut - 25 Ft. 655.20



684.05


1,988.21


115.44


2,816.57


869.69


1,092.77


1,092.77



353.33


309.65


309.65



Continued



List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32404 Steel End Finger Kit for Reel

Suggested for tough, down, tangled, or lodged crop conditions. Includes 3 fingers for one endof the reel. One set is needed for each end of the reel.

290.16


869.69

BE32415 Top Crop Conveying Auger - 30 Ft.When used with the Double Draper Drive, additional Hydraulic Kit (BE32388) is required.The Top Crop Conveying Auger is not recommended for most crops and conditions.When ordering without double draper drive, case drain kit BE32510 is required.Top Crop Conveying Auger recommended for Windrower use in the followingcrops/conditions:- Tall bulky over-ripe Canola- Any tall heavy forage crop such as sudan or cane crop types where material flow through theopening is constricted.

5,243.16


Recommended for on ground cutting. Complete replacement kit for shoes included in baseequipment with package 0816 only.

1,092.77

BE32426 Gauge WheelsCompatible with 430D, 435D, and 440D models ONLY. With 25 Ft. and narrower draperplatforms, gauge wheels are not compatible or needed. The platform is supported by thetraction unit for off ground cutting and by the gauge shoes for on ground cutting.

2,907.84

BE32430 Gauge Wheels and Integrated Slow Speed Road Transport SystemCompatible with 430D, 435D, and 440D models ONLY. Do not exceed 25 MPH (40 KPH).

Gauge Wheels / Integrated Slow-speed Transport Package may be towed behind a Windrowerwhen using a weight box. Transport must not exceed 25 mph (40 kph) when being towed.Towing vehicle (W150 Windrower or tractor only) must have 7 pin electrical outlet forwarning lights and is limited to 25 mph.

6,647.16


556.13


1,026.48


1,378.25


1,496.81



Continued



List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32429 Wiring Harness and Hitch Pin Kit

Includes wiring harness for weight box to attach lighting for platform when operating onpublic roadways.

152.88



Continued












List PriceSuggested

USD ($)



4305E 430D - 9.14 m (30 Ft.) Draper Cutting Platform - Dual Knife Drive 6 Bat Plastic Finger SplitReel Hydraulic Deck ShiftCompatible with W110, W150, or W155 Windrowers only.

79,206.00

DESTINATION







430D - 9.14 m (30 Ft.) Draper Cutting Platform - Dual Knife Drive 6 Bat Plastic FingerSplit Reel Hydraulic Deck Shift




List PriceSuggested

USD ($)

PACKAGE CONFIGURATIONS0816 Dual Knife Drive 6 Bat Plastic Finger Split Reel Package - 30 Ft.

Pointed Profile / Double Heat Treated Forged Steel Guards;Fine Sections 14 Teeth per Inch;Split Span 6 Bat Reel;Plastic Finger;Hydraulic Deck Shift, Triple Delivery;4 Inboard Gauge Shoes;2 Outboard Gauge Shoes;Cutterbar Full Width Poly Skid Shoes

In Configuration



4,561.00



855.00


2,497.00


1,093.00


1,372.00


1,372.00



442.00


19,075.00


360.00




Continued



List PriceSuggested

USD ($)



387.00


387.00

9073 Top Crop Conveying Auger - 30 FtWhen used with the Double Draper Drive, an additional Hydraulic Kit (BE32388) is required.The Top Crop Conveying Auger is not recommended for most crops and conditions.When ordering without double draper drive, case drain kit BE32510 is required. Top CropConveying Auger recommended for Windrower use in the following crops/conditions:- Tall bulky over-ripe Canola- Any tall heavy forage crop such as sudan or cane crop types where material flow through theopening is constricted.

6,575.00



693.00


191.00


3,663.00



8,277.00


1,877.00





Continued



List PriceSuggested

USD ($)




3,630.89



684.05


1,988.21


115.44


869.69


1,092.77


1,092.77



353.33


309.65


309.65


15,147.60


290.16


869.69



Continued



List PriceSuggested

USD ($)



5,243.16


Recommended for on ground cutting. Complete replacement kit for shoes included in baseequipment with package 0816 only.

1,092.77


2,907.84



6,647.16


556.13


1,026.48


1,378.25


1,496.81


152.88



Continued




Continued



CUTTERBAR:Double or Single Cut Knife System with ScrewAdjustable Knife Hold-downs










List PriceSuggested

USD ($)



4310E 435D - 10.66 m (35 Ft.) Draper Cutting Platform - Single Knife Drive 5 Bat Plastic FingerReel Manual Deck ShiftCompatible with W110, W150, or W155 Windrowers only.

66,424.00

DESTINATION










List PriceSuggested

USD ($)

PACKAGE CONFIGURATIONS0820 Single Knife Drive 5 Bat Plastic Finger Reel Package - 35 Ft.

Pointed Profile / Double Heat Treated Forged Steel Guards;Course Sections 9 Teeth per Inch;Single Span 5 Bat Reel;Plastic Finger;Manual Deck Shift, Triple Delivery;2 Outboard Gauge Shoes

In Configuration

CUTTERBAR9083 Spare Knife, One-Piece with Knife Head Coarse Cut - 35 Ft.

Compatible with Single Knife platform package 0820 only.1,279.00



855.00


2,497.00


1,093.00


1,372.00


1,372.00


3,539.00



442.00


360.00


1,093.00

9021 End Swath Deflector Rods (For LH End) 387.00



Continued



List PriceSuggested

USD ($)

FEEDING ...Continued...Recommended when using deck shift to reduce windrow laying on the uncut crop.


387.00

9074 Top Crop Conveying Auger - 35 Ft.When used with the Double Draper Drive, an additional Hydraulic Kit (BE32388) is required.The Top Crop Conveying Auger is not recommended for most crops and conditions.When ordering without double draper drive, case drain kit BE32510 is required.Top Crop Conveying Auger recommended for Windrower use in the followingcrops/conditions:- Tall bulky over-ripe Canola- Any tall heavy forage crop such as sudan or cane crop types where material flow through theopening is constricted.

6,874.00



693.00


191.00


3,663.00



8,277.00

9054 Cutterbar Full Width Poly Skid Shoes and Hardware Kit - 435DRecommended for on ground cutting. Complete replacement kit for shoes originally included inbase equipment with packages 0821 and 0822.

1,578.00


1,877.00





Continued



List PriceSuggested

USD ($)


CutterbarBE32424 Spare Knife, One-Piece with Knife Head Coarse Cut - 35 Ft.

Compatible with Single Knife platform package 0820 only.1,021.80



684.05


1,988.21


115.44


2,816.57


869.69


1,092.77


1,092.77



353.33


309.65


309.65


290.16


869.69



Continued



List PriceSuggested

USD ($)



5,481.05


Recommended for on ground cutting. Complete replacement kit for shoes. Included in baseequipment with packages 0821 and 0822.

1,260.48


2,907.84



6,647.16


556.13


1,026.48


1,378.25


1,496.81


152.88



Continued




Continued




GUARDS:Pointed profile/double heat treated long pointforged steel guards









List PriceSuggested

USD ($)



4314E 435D - 10.66 m (35 Ft.) Draper Cutting Platform - Dual Knife Drive 5 Bat Plastic Finger ReelManual Deck ShiftCompatible with W110, W150, or W155 Windrowers only.

76,223.00

DESTINATION







435D - 10.66 m (35 Ft.) Draper Cutting Platform - Dual Knife Drive 5 Bat Plastic FingerReel Manual Deck ShiftEquipment for Base Machine



List PriceSuggested

USD ($)

PACKAGE CONFIGURATIONS0821 Dual Knife Drive 5 Bat Plastic Finger Reel Package - 35 Ft.

Pointed Profile / Double Heat Treated Forged Steel Guards;Fine Sections 14 Teeth per Inch;Single Span 5 Bat Reel;Plastic Finger;Manual Deck Shift, Triple Delivery;4 Inboard Gauge Shoes;2 Outboard Gauge Shoes;Cutterbar Full Width Poly Skid Shoes

In Configuration



5,377.00



855.00


2,497.00


1,093.00


1,372.00


1,372.00


3,539.00



442.00


360.00

9023 Swath Forming Rods (Center Delivery)Recommended to make a narrower windrow. Typical for grass seed harvest. Standard

1,093.00


435D - 10.66 m (35 Ft.) Draper Cutting Platform - Dual Knife Drive 5 Bat Plastic FingerReel Manual Deck Shift

Continued



List PriceSuggested

USD ($)

FEEDING ...Continued...equipment on 415D with 9 bat reel only.


387.00


387.00


6,874.00



693.00


191.00


3,663.00



8,277.00


1,877.00





Continued



List PriceSuggested

USD ($)




4,272.84



684.05


1,988.21


115.44


2,816.57


869.69


1,092.77


1,092.77



353.33


309.65


309.65


290.16


869.69



Continued



List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32511 Tine Tube Reinforcement Kit for 5 Bat Reel - 435D

Reinforcement tine tubes for improved reel life in heavy crop cutting conditions.Only compatible with Model Year 2013 435D 5 bat reel platforms.

287.04


5,481.05

Frame and ChassisBE32426 Gauge Wheels

Compatible with 430D, 435D, and 440D models ONLY. With 25 Ft. and narrower draperplatforms, gauge wheels are not compatible or needed. The platform is supported by thetraction unit for off ground cutting and by the gauge shoes for on ground cutting.

2,907.84



6,647.16


556.13


1,026.48


1,378.25


1,496.81


152.88



Continued




Continued













List PriceSuggested

USD ($)



4318E 435D - 10.66 m (35 Ft.) Draper Cutting Platform - Dual Knife Drive 6 Bat Plastic Finger ReelHydraulic Deck ShiftCompatible with W110, W150, or W155 Windrowers only.

82,186.00

DESTINATION











List PriceSuggested

USD ($)

PACKAGE CONFIGURATIONS0822 Dual Knife Drive 6 Bat Plastic Finger Split Reel Package - 35 Ft.

Pointed Profile / Double Heat Treated Forged Steel Guards;Fine Sections 14 Teeth per Inch;Split Span 6 Bat Reel;Plastic Finger;Hydraulic Deck Shift, Triple Delivery;4 Inboard Gauge Shoes;2 Outboard Gauge Shoes;Cutterbar Full Width Poly Skid Shoes;Tine Tube Reinforcement Kit for Heavy Reel Loads

In Configuration



5,377.00



855.00


2,497.00


1,093.00


1,372.00


1,372.00



442.00


360.00


1,093.00

9021 End Swath Deflector Rods (For LH End) 387.00



Continued



List PriceSuggested

USD ($)

FEEDING ...Continued...Recommended when using deck shift to reduce windrow laying on the uncut crop.


387.00


6,874.00



693.00


191.00


3,663.00



8,277.00


1,877.00





Continued



List PriceSuggested

USD ($)




4,272.84



684.05


1,988.21


115.44


869.69


1,092.77


1,092.77



353.33


309.65


309.65


290.16


869.69



Continued



List PriceSuggested

USD ($)



5,481.05

Frame and ChassisBE32426 Gauge Wheels

Compatible with 430D, 435D, and 440D models ONLY. With 25 Ft. and narrower draperplatforms, gauge wheels are not compatible or needed. The platform is supported by thetraction unit for off ground cutting and by the gauge shoes for on ground cutting.

2,907.84



6,647.16


556.13


1,026.48


1,378.25


1,496.81


152.88



Continued




Continued













List PriceSuggested

USD ($)



4320E 440D - 40 Ft. Draper Cutting Platform - Dual Knife Drive 5 Bat Plastic Finger Reel ManualDeck Shift- US, Canada, MexicoNot recommended for W110 windrowers. Power level is better matched with W150 or W155.

82,648.00

DESTINATION







440D - 40 Ft. Draper Cutting Platform - Dual Knife Drive 5 Bat Plastic Finger Reel ManualDeck Shift- US, Canada, Mexico




List PriceSuggested

USD ($)

PACKAGE CONFIGURATIONS0825 Dual Knife Drive 5 Bat Plastic Finger Split Reel Drive Package - 40 Ft.

For US, Canada, and Mexico markets only. Pointed Profile / Double Heat Treated ForgedSteel Guards;Coarse Sections 9 Teeth per Inch;Split Span 5 Bat Reel;Plastic Finger;Manual Deck Shift, Triple Delivery;2 Outboard Gauge Shoes;Cutterbar Full Width Poly Skid Shoes;Tine Tube Reinforcement Kit for Heavy Reel Loads (North American only)

In Configuration

CUTTERBAR9084 Spare Knife set with Knife Head Coarse Cut - 40 Ft.

Compatible with Double Knife 40 Ft. platform only.1,382.00



855.00


2,497.00


1,093.00


1,372.00


1,372.00


3,539.00



442.00


360.00

9023 Swath Forming Rods (Center Delivery)Recommended to make a narrower windrow. Typical for grass seed harvest. Standard

1,093.00



Continued



List PriceSuggested

USD ($)

FEEDING ...Continued...equipment on 415D with 9 bat reel only.


387.00


387.00


7,215.00



693.00


191.00


3,663.00



8,277.00


1,877.00





Continued



List PriceSuggested

USD ($)


CutterbarBE32425 Spare Knife set with Knife Head Coarse Cut - 40 Ft.

Compatible with Double Knife 40 Ft. platform only.1,104.48



684.05


1,988.21


115.44


2,816.57


869.69


1,092.77


1,092.77



353.33


309.65


309.65


290.16


869.69



Continued



List PriceSuggested

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BE32512 Tine Tube Reinforcement Kit for 6 Bat Reel - 440D

Reinforcement tine tubes for improved reel life in heavy crop cutting conditions.Only compatible with Model Year 2013 440D 6 bat reel platforms.

313.56


5,745.48


Recommended for on ground cutting.1,430.52


2,907.84



6,647.16


556.13


1,026.48


1,378.25


1,496.81


152.88



Continued




Continued


CUTTERBAR:The SCH Easy Cut Cutting System provides smooth,superior cutting. Spring steel guards with cuttingedges on top and bottom, along with alternating andbolted heat-treated sections, eliminate the needfor hold downs. The system keeps dirt and debrisfrom accumulating under the knives for increasedperformance in severe cutting conditions.

HAY GUARDS:Hay guard ensures a smooth transition from knife todraper and reduces material wrapping on therollers.

POLYESTER DRAPERS42" (106.7 cm) drapers are made of long-lasting,rubberized polyester with fibreglass reinforcedslats and are V-guided to eliminate manual drapertracking

DRAPER DRIVEThe 3" (7.6 cm) diameter drive rollers providetraction in heavy crop conditions. Powered from theinside by a hydraulic motor, the drapers move thecrop towards the centre for more uniform feeding

REEL DRIVEThe hydraulically driven reel is easily controlledusing standard in-cab controls. In-cab controlsallow for quick reel adjustment in changing cropconditions.

KNIFE DRIVEThe knife is driven by a 3 5/16" (8.4 cm) strokeepicyclic knife drive which operates at 1,440

strokes per minute. The knife drive is driven by alow-maintenance hydraulic drive motor. Double knifedrive systems are standard equipment on 25', 30'and 36' models.

DOUBLE SWATHUsing two shifting decks, double swath gives youin-cab control for right, left and centre deliveryof your windrow. Double swath is optional on 25',30' and 36' models.

SWATH OPENINGStandard swath opening is 81" +/- 3". Double swathstandard opening of 46" +/- 6". Standard swathopening may be decreased by 14" or 28" on somemodels.

ADJUSTABLE CASTORING GAUGE WHEELVertically adjustable and cushioned with a springfor compression and rebound, castoring gauge wheelsare available as standard equipment on 30' and 36'swather tables. N/A on 25'. The castoring designeliminates gouging when turning.

INTEGRAL STORAGE TRANSPORTThe self-contained transport, including hitch, jackand axle, is conveniently stored on the swathertable.


List PriceSuggested

USD ($)


BASE MACHINEEX-WORKS Frontier, Saskatchewan or Port of EntryCompatible with Model Year 2016 W235 and W260. Additional kits required for MY2014 or2015 W235 Rotary's or W260. Not compatible with 2014 or 2015 W235 Draper traction unit.

4400E 525D - 25 Ft. Draper Cutting PlatformDouble Knife;Schumacher Cutting System with Steel bars (no rollers);Poly Skid;Parallel Path Hydraulics;Hydraulic Tilt;Hydraulic Fore and Aft;Storage Transport c/w Tires and Wheels;Remote Canvas Speed Control;Hay Guard;Adapter Package;Warning Light Package;Crop Divider Short Nose;Crop Divider tall;"Roto-Shear" ready;6 Bat Reel;Remote Reel Speed Control;

57,043.00


525D - 25 Ft. Draper Cutting PlatformEquipment for Base Machine



List PriceSuggested

USD ($)

DESTINATION




0409 English (U.S. / Canada / Australia / New Zealand ONLY)English operator manual and decals.

In Base Price

0443 English/Spanish (U.S. ONLY)English and Spanish operator manual and decals.

Same Price


Same Price

PACKAGE CONFIGURATIONS4530 Single Swath Package A

Single swath gives operators the ability for center windrow delivery only.In Base Price

4535 Double Swath Package BDouble swath (hydraulic deck shift) uses two shifting decks to give operators in-cab control forright, left and center windrow delivery.

5,130.00

AUGER8453 Cross Auger - Single Swath Drapers Only

25 Foot draper head only. Only for drapers with code 4530 Single Swath Package.Helps convey bushy crop across the drapers.

2,992.00

8454 Cross Auger - Double Swath Drapers Only25 Foot draper head only. Only for drapers with code 4535 Double Swath Package.Helps convey bushy crop across the drapers when using it for center delivery. If you are usingdouble swath and discharging to the left or right side of the platform, the cross auger can bemoved up out of the way.

3,075.00

MISCELLANEOUS9455 14" Deck Extension

Kit includes two 14 inch deck extensions. By adding one or both of the deck extensions, youcan narrow the width of the swath opening allowing for a thicker windrow if desired. Note:Deck extensions come standard if you order the double swath option.

815.00

9456 End Strut Gauge WheelsAdditional wheels on left and right hand ends of the draper table helping to avoid the draperdigging into the ground when turning or going over uneven terrain.

3,126.00

9457 4 Wheel Transport SystemThe 4 wheel transport system adds a set of dolly wheels at the hitch (in addition to the standardtransport wheels in the middle of the table) making it a carted solution.

2,797.00


525D - 25 Ft. Draper Cutting PlatformContinued



List PriceSuggested

USD ($)

ALLIED SUPPLIER INFORMATIONThe 500D comes from the factory fully compatible with the 2016 W235 or W260 traction unitand no additional kits are required. However, see below for kits needed for 2014 or 2015W235 or W260 Rotary traction units.

To put a 500D on a 2015 W235 or W260 Rotary traction unit, the following additional itemsare required:1. Honey Bee Switchbox Kit*2. John Deere BEX10477 Mobile Mounting Bar

To put a 500D on a 2014 W235 Rotary Traction Unit the following additional items arerequired:1. Honey Bee Switchbox Kit*2. John Deere BE32600 Independent Float Kit3. John Deere BEX10477 Mobile Mounting Bar

To order the Honey Bee Switchbox Kit, HB part number 94946, for 2014 or 2015 W200'scontact Honey Bee Manufacturing directly, at:Honey Bee Manufacturing LTD.P.O. Box 120Frontier, SK S0N 0W0 CanadaTelephone: (306) 296-2297FAX: (306) 296-2165www.honeybee.ca
















List PriceSuggested

USD ($)







List PriceSuggested

USD ($)

BASE MACHINE ...Continued...4410E 530D - 30 Ft. Draper Cutting Platform

Double Knife;Schumacher Cutting System with Steel bars (no rollers);Poly Skid;Parallel Path Hydraulics;Hydraulic Tilt;Hydraulic Fore and Aft;Storage Transport c/w Tires and Wheels;Remote Canvas Speed Control;Hay Guard;Adapter Package;Warning Light Package;Crop Divider Short Nose;Crop Divider tall;"Roto-Shear" ready;6 Bat Reel;Remote Reel Speed Control; Gauge Wheels (Tires and Wheels with Transport) included on530D and 536D only

62,287.00

DESTINATION





In Base Price


Same Price


Same Price




5,130.00



3,818.00

8454 Cross Auger - Double Swath Drapers Only 3,818.00





List PriceSuggested

USD ($)

AUGER ...Continued...30 Foot draper head only. Only for drapers with code 4535 Double Swath PackageHelps convey bushy crop across the drapers when using it for center delivery. If you are usingdouble swath and discharging to the left or right side of the platform, the cross auger can bemoved up out of the way.



815.00


3,126.00


2,797.00




















List PriceSuggested

USD ($)



4420E 536D - 36 Ft. Draper Cutting PlatformDouble Knife;Schumacher Cutting System with Steel bars (no rollers);Poly Skid;Parallel Path Hydraulics;Hydraulic Tilt;Hydraulic Fore and Aft;Storage Transport c/w Tires and Wheels;Remote Canvas Speed Control;Hay Guard; Adapter Package;Warning Light Package;Crop Divider Short Nose;Crop Divider tall;"Roto-Shear" ready;6 Bat Reel;Remote Reel Speed Control; Gauge Wheels (Tires and Wheels with Transport) included on530D and 536D only

70,498.00





List PriceSuggested

USD ($)

DESTINATION





In Base Price


Same Price


Same Price




5,130.00



4,128.00

8454 Cross Auger - Double Swath Drapers Only36 Foot draper head only. Only for drapers with code 4535 Double Swath PackageHelps convey bushy crop across the drapers when using it for center delivery. If you are usingdouble swath and discharging to the left or right side of the platform, the cross auger can bemoved up out of the way.

4,231.00



815.00


3,126.00


2,797.00





List PriceSuggested

USD ($)








MountingPick up with fixed mounting frame for attachment toa 8000 series SPFHMulti-coupler for all hydraulic and electricconnectionsAutomatic header recognition by the SPFHHeight-adjustable jack stands

Drive lineStandard header drive connection for PTO-shaftSingle speed main transmission for the auger andthe pick up reelDrive shaft with radial pin slip clutchPick up reel overrun clutch

Pick up reelPick up with 4 tooth bars40 teeth / barRoller bearing pick up reelTwo skid shoesPick up working width 2550 mm (tine to tine)Tooth working diameter 450 mmTooth spacing 65 mmStripper diameter 255 mmAugerFully-flighted auger with removable/adjustablepaddlesFlight diameter 560 mmAuger tube diameter 300 mmLength of the auger 2640 mm

Compression unitRoller compression unit with rake tinesRelease of tension with an accumulatorHeight sensor for the compression unitAutomatic auger lifting during reversing

Gauge wheelsTwo manual folding pneumatic gauge wheels360° pivoting gauge wheelsEasy adjustment of the height without using toolsTire 18.5 x 8.5-8PR Diameter 478 mm Width 210 mmMax. load 515 kg

Road transportGauge wheels manual foldable for road transport360° pivoting gauge wheels automatically lockedduring transportCounterweights should be in compliance withgovernment road regulationsTransport width 3000 mm

MiscellaneousFull width trash net completely covering the pickup


List PriceSuggested

USD ($)


BASE MACHINE0174KM Windrow Pick Up 639

For adaptation on SPFH 8000 Series28,429.00



OPERATOR'S MANUAL0455 English NA In Base Price

SHIPPING PREPARATION7705 Shipping Preparation For Container Shipment In Base Price

MOUNTING FRAMES1040 SPFH 8000 Series standard crop flow channel Same Price

1050 SPFH 8000 Series wide crop flow channel In Base Price

AGRICULTURAL PRODUCTSJOHN DEERE FORAGE EQUIPMENT

Windrow Pick Up 639Equipment for Base Machine



List PriceSuggested

USD ($)

PICKUP UNIT1100 Standard Picking unit

4.9 mm tinesstandard angled tooth barstandard bearingsstandard cam tracksstandard spiders28 mm hexagon shaft

In Base Price

1110 Premium - heavy duty pick up unit & Dura Line wear parts6 mm tinesheavy duty u-shaped tooth barheavy duty bearingsheavy duty cam tracksheavy duty spiders32 mm hexagon shaftDura Line auger flight reinforcement stripsDura Line deck platesDura Line auger strippersDura Line deflector plates

3,204.00

HEADER DRIVE CONNECTION2421 Standard PTO for SPFH 8000 Series In Base Price

2426 Automatic PTO Coupler for mechanical Header Drive (header side) for 8000 series SPFHSPFH also needs to have the option 'automatic PTO coupler for mechanical Header Drive'

630.00

HEADER DRIVE4030 Standard pick up reel transmission In Base Price

4035 Dual Header Drive (= hydraulic pick up reel drive)Pick up with auxiliary drive (2nd hydraulic drive for the pick up reel)Only works if the SPFH is equipped with the optional 'Dual Header Drive'

3,251.00

GAUGE WHEELS3200 Manual foldable gauge wheels In Base Price

3210 Hydraulic foldable gauge wheels 645.00

COMPRESSION UNIT4210 Roller compression unit with rake tines In Base Price

4225 Roller compression unit with alfalfa sheet 878.00

OPERATOR'S MANUAL AND DECAL KIT9013 French as additional language (translation of NA version) No Charge

9037 Spanish as additional language (translation of NA version) No Charge

LUBRICATION SYSTEM8175 Automatic Lubrication system for chains 620.00


Windrow Pick Up 639Continued



List PriceSuggested

USD ($)

GAUGE WHEELS8150 Center gauge wheel 842.00




MountingPick up with fixed mounting frame for attachment toa 8000 series SPFHMulti-coupler for all hydraulic and electricconnectionsAutomatic header recognition by the SPFHHeight-adjustable jack stands

Drive lineStandard header drive connection for PTO-shaftSingle speed main transmission for the auger andthe pick up reelDrive shaft with radial pin slip clutchPick up reel overrun clutch

Pick up reelPick up 8 tooth bars 28 teeth / barRoller bearing pick up reelTwo skid shoesPick up working width 3630 mm (tine to tine)Tooth working diameter 450 mmTooth spacing 65 mmStripper diameter 255 mm

AugerFully-flighted auger with removable/adjustablepaddlesFlight diameter 560 mmAuger tube diameter 300 mmLength of the auger 3715 mm

Premium - heavy duty pick up unit & Dura Line wearparts

# 6 mm tines# heavy duty u-shaped tooth bar# heavy duty bearings

# heavy duty cam tracks# heavy duty spiders# 32 mm hexagon shaft# Dura Line auger flight reinforcement strips# Dura Line deck plates# Dura Line auger strippers# Dura Line deflector plates

Gauge wheelsTwo manual folding pneumatic gauge wheels360° pivoting gauge wheelsEasy adjustment of the height without using toolsTire 18.5 x 8.5-8PR Diameter 478 mm Width 210 mmMax. load 515 kg

Compression unitRoller compression unit with rake tinesRelease of tension with an accumulatorHeight sensor for the compression unitAutomatic auger lifting during reversing

Road transportGauge wheels manual foldable for road transport360° pivoting gauge wheels automatically lockedduring transport Counterweights should be incompliance with government road regulationsTransport width 4090 mm Miscellaneous Full widthtrash net completely covering the pick up


List PriceSuggested

USD ($)












List PriceSuggested

USD ($)


1050 SPFH 8000 Series wide crop flow channel In Base Price



630.00



3,251.00












MountingPick up with fixed mounting frame for attachmentto a 8000 series SPFHMulti-coupler for all hydraulic and electricconnectionsAutomatic header recognition by the SPFHHeight-adjustable jack standsDrive lineStandard header drive connection for PTO-shaftSingle speed main transmission for the auger andthe pick up reelDrive shaft with radial pin slip clutchPick up reel overrun clutchPick up reelPick up 8 tooth bars 32 teeth / barRoller bearing pick up reelTwo skid shoesPick up working width 4140 mm (tine to tine)Tooth working diameter 450 mmTooth spacing 65 mmStripper diameter 255 mmAugerFully-flighted auger with removable/adjustablepaddlesFlight diameter 560 mmAuger tube diameter 300 mmLength of the auger 4225 mmPremium - heavy duty pick up unit & Dura Line wearparts

# 6 mm tines# Heavy duty u-shaped tooth bar# Heavy duty bearings# Heavy duty cam tracks

# Heavy duty spiders32 mm hexagon shaft# Dura Line auger flight reinforcement strips# Dura Line deck plates# Dura Line Auger strippers# Dura Line deflector plates

Compression unitRoller compression unit with rake tinesRelease of tension with an accumulatorHeight sensor for the compression unitAutomatic auger lifting during reversingGauge wheelsTwo manual folding pneumatic gauge wheels360° pivoting gauge wheelsEasy adjustment of the height without using toolsTire 18.5 x 8.5-8PR Diameter 478 mm Width 210 mmMax. load 515 kgRoad transportGauge wheels manual foldable for road transport360° pivoting gauge wheels automatically lockedduring transportCounterweights should be in compliance withgovernment road regulationsTransport width 4590 mmMiscellaneousFull width trash net completely covering the pickup


List PriceSuggested

USD ($)













List PriceSuggested

USD ($)

MOUNTING FRAMES ...Continued...1050 SPFH 8000 Series wide crop flow channel In Base Price



630.00



3,251.00












MountingRotary crop header with integral mounting framefor attachment to a SPFHFixed frame (8000 series)Mechanical pivoting frame (7000 series)Height-adjustable jack standsMulti-coupler for all hydraulic and electricconnections (8000 series)Drive lineSingle speed main transmission (8000 series)Two speed gearbox (7000 series)Power is transmitted by closed oil bath gearboxesand safety clutchesLiquid cooled friction clutchesStandard header drive connection for PTO-shaftPTO shaft 23 splints for SPFH (7000 series)Protection of the main frameBolt on wear plates underneath the main frameCutting systemRow-independent cutting system with high-speedcutting rotorsCuts across the entire working width usingenclosed saw-type rotor blades with replaceablesegmentsBlades coated with tungsten carbide

Crop transportEven bundling and intake of the crop lengthwise tothe chopping unitOptimal quality of cut through compact and cleanbundlingOptimised intake of down crop thanks to the flatdesign of the header and aggressive gathering drumsBolt-on easy changeable cleaners on all drumsRoad transportOuter gathering drums hydraulically foldable forroad transportCounterweights should be in compliance withgovernment road regulationsTechnical specificationsLength 1600 mmOverall width 4500 mmWorking width 4500 mmTransport width 3000 mmHeight 1840 mm


List PriceSuggested

USD ($)


BASE MACHINE0144KM Base machine 696 Rotary Crop Header 88,535.00




MOUNTING FRAMES1015 SPFH 7000 Series standard crop flow channel 1,634.00

1040 SPFH 8000 Series standard crop flow channelFits only on MY2018 SPFHFor attachment MY2017 and earlier a special SPFH parts bundle (PDC) is requiredOnly for 696, 698 and 690

In Base Price

HEADER DRIVE CONNECTION2410 PTO for 7000 series SPFH Same Price

2421 Standard PTO for 8000 series SPFH In Base Price

2426 Automatic PTO Coupler for mechanical Header Drive (header side) for 8000 series SPFH 630.00


Base machine 696 Rotary Crop HeaderEquipment for Base Machine



List PriceSuggested

USD ($)

HEADER DRIVE CONNECTION ...Continued...SPFH also needs to have the option 'automatic PTO coupler for mechanical Header Drive'



AUTOMATIC STEERING SYSTEM8410 RowSense - automatic steering system for 8000 series SPFH

SPFH needs to be at least 'RowSense ready'2,357.00

POINTERS9355 Fixed crop lifters

Includes 12 pc464.00


Base machine 696 Rotary Crop HeaderContinued


MountingRotary crop header with integral mounting frame forattachment to a SPFHFixed frame (8000 series)Mechanical pivoting frame (7000 series)Height-adjustable jack standsMulti-coupler for all hydraulic and electricconnections (8000 series)

Drive lineSingle speed main transmission (8000 series)Two speed gearbox (7000 series)Power is transmitted by closed oil bath gearboxesand safety clutchesLiquid cooled friction clutchesStandard header drive connection for PTO-shaftPTO-shaft 23 splints for SPFH (7000 series)Protection of the main frameBolt on wear plates underneath the main frameCutting systemRow-independent cutting system with high-speedcutting rotorsCuts across the entire working width using enclosedsaw-type rotor blades with replaceable segmentsBlades coated with tungsten carbide

Crop transportEven bundling and intake of the crop lengthwise tothe chopping unitOptimal quality of cut through compact and cleanbundlingOptimised intake of down crop thanks to the flatdesign of the header and aggressive gathering drumsBolt-on easy changeable cleaners on all drumsRoad transportOuter gathering drums hydraulically foldable forroad transportCounterweights should be in compliance withgovernment road regulationsTechnical specificationsLength 1730 mmOverall width 6000 mmWorking width 6000 mmTransport width 3000 mmHeight 1840 mm


List PriceSuggested

USD ($)







1030 SPFH 7000 Series wide crop flow channel 5,488.00


Same Price

1050 SPFH 8000 Series wide crop flow channelFits only on MY2018 SPFHFor attachment MY2017 and earlier a special SPFH parts bundle (PDC) is requiredOnly for 698 and 690

In Base Price





List PriceSuggested

USD ($)




630.00



ADVANCED HEADER CONTROL8200 Advanced Header Control (AHC) - automatic header height control for 7000 series SPFH

SPFH also needs to have the option Advanced Header Control (AHC)4,155.00

8210 Advanced Header Control (AHC) - automatic header height control for 8000 series SPFHSPFH also needs to have the option Advanced Header Control (AHC)

4,155.00



8410 RowSense - automatic steering system for 8000 series SPFHSPFH needs to be at least 'RowSense ready'

2,357.00






MountingRotary crop header with integral mounting frame forattachment to a SPFH Fixed frame (8000 series)Mechanical pivoting frame (7000 series)Height-adjustable jack standsMulti-coupler for all hydraulic and electricconnections (8000 series)Drive lineSingle speed main transmission (8000 series)Two speed gearbox (7000 series)Power is transmitted by closed oil bath gearboxesand safety clutchesLiquid cooled friction clutchesStandard header drive connection for PTO-shaftPTO-shaft 23 splints for SPFH (7000 series)Protection of the main frameBolt on wear plates underneath the main frameCutting systemRow-independent cutting system with high-speedcutting rotorsCuts across the entire working width using enclosedsaw-type rotor blades with replaceable segmentsBlades coated with tungsten carbideCrop transport

Even bundling and intake of the crop lengthwise tothe chopping unitOptimal quality of cut through compact and cleanbundlingOptimised intake of down crop thanks to the flatdesign of the header and aggressive gathering drumsBolt-on easy changeable cleaners on all drumsRoad transportOuter gathering drums hydraulically foldable forroad transportCounterweights should be in compliance withgovernment road regulationsTechnical specificationsLength 1730 mmOverall width 7500 mmWorking width 7500 mmTransport width 3000 mmHeight 1840 mm


List PriceSuggested

USD ($)







1030 SPFH 7000 Series wide crop flow channel 5,488.00


In Base Price

1050 SPFH 8000 Series wide crop flow channelFits only on MY2018 SPFHFor attachment MY2017 and earlier a special SPFH parts bundle (PDC) is requiredOnly for 698 and 690

Same Price





List PriceSuggested

USD ($)




630.00





8210 Advanced Header Control (AHC) - automatic header height control for 8000 series SPFHSPFH also needs to have the option Advanced Header Control (AHC)

4,155.00




2,357.00






MountingRotary crop header with integral fixed mountingframe for attachment to a 8000 seriesSPFH with a wide crop flow channelHeight-adjustable jack standsMulti-coupler for all hydraulic and electricconnectionsDrive lineSingle speed main transmissionPower is transmitted by closed oil bath gearboxesand safety clutchesLiquid cooled friction clutchesStandard header drive connection for PTO-shaftProtection of the main frameBolt on wear plates underneath the main frameCutting systemRow-independent cutting system with high-speedcutting rotorsCuts across the entire working width using enclosedsaw-type rotor blades with replaceable segmentsBlades coated with tungsten carbideCrop transportEven bundling and intake of the crop lengthwise to

the chopping unitOptimal quality of cut through compact and cleanbundlingOptimised intake of down crop thanks to the flatdesign of the header and aggressive gathering drumsBolt-on easy changeable cleaners on all drumsRoad transportOuter gathering drums hydraulically foldable forroad transportCounterweights should be in compliance withgovernment road regulationsTechnical specificationsLength 1730 mmOverall width 9000 mmWorking width 9140 mmTransport width 3300 mmHeight 1840 mm


List PriceSuggested

USD ($)






HEADER DRIVE CONNECTION2421 Standard PTO for 8000 series SPFH In Base Price


630.00



ADVANCED HEADER CONTROL





List PriceSuggested

USD ($)

ADVANCED HEADER CONTROL ...Continued...8210 Advanced Header Control (AHC) - automatic header height control for 8000 series SPFH









MountingRotary crop header with integral fixed mountingframe for attachment to a SPFHFits for standard channel width SPFH (up to 75X0and 8500)Height-adjustable jack standsMulti-coupler for all hydraulic and electricconnections (8000 series)Drive lineSingle speed main transmission (8000 series)Two speed gearbox (7000 series)Power is transmitted by closed oil bath gearboxesand safety clutchesTwo standard main friction clutchesStandard header drive connection for PTO-shaftPTO-shaft 23 splints for SPFH (7000 series)Cutting systemRow-independent cutting system with high-speedcutting rotorsCuts across the entire working width usingenclosed saw-type rotor blades with replaceablesegmentsBlades coated with tungsten carbideCrop transport

Even bundling and intake of the crop lengthwise tothe chopping unitOptimal quality of cut through compact and cleanbundlingTwo actively driven down crop augers (power endfenders) left- and right-hand sideRoad transportOuter gathering drums hydraulically foldable forroad transportCounterweights should be in compliance withgovernment road regulationsTechnical specificationsLength 2200 mmOverall width 4600 mmWorking width 4550 mmTransport width 2470 mmHeight 1150 mm


List PriceSuggested

USD ($)







1040 SPFH 8000 Series standard crop flow channel In Base Price

HEADER DRIVE CONNECTION2410 PTO for SPFH 7000 Series Same Price

2421 Standard PTO for SPFH 8000 series In Base Price


630.00

CLUTCH





List PriceSuggested

USD ($)

CLUTCH ...Continued...3080 Friction clutch In Base Price

3081 Liquid-cooled friction clutch 834.00






Includes 6 pc231.00

9812 Height adjustable crop lifters 252.00

9350 Whole crop silage equipment (2 pc.) 200.00




MountingRotary crop header with integral mounting frame forattachment to a SPFHHeight-adjustable jack standsMulti-coupler for all hydraulic and electricconnections (8000 series)Drive lineSingle speed main transmission (8000 series)Two speed gearbox (7000 series)Power is transmitted by closed oil bath gearboxesand safety clutchesTwo liquid-cooled main friction clutchesStandard header drive connection for PTO-shaftPTO-shaft 23 splints for SPFH (7000 series)Cutting systemRow-independent cutting system with high-speedcutting rotorsCuts across the entire working width using enclosedsaw-type rotor blades with replaceable segmentsBlades coated with tungsten carbideCrop transportEven bundling and intake of the crop lengthwise tothe chopping unit

Optimal quality of cut through compact and cleanbundlingOptimised intake of down crop thanks to low outsidepoints and aggressive gathering drumsBolt-on easy changeable cleaners on all drumsRoad transportOuter gathering drums hydraulically foldable forroad transportCounterweights should be in compliance withgovernment road regulationsTechnical specificationsLength 2600 mmOverall width 6000 mmWorking width 6000 mmTransport width 3000 mmHeight 1810 mm


List PriceSuggested

USD ($)


BASE MACHINE044AKM Base machine 778 Rotary Crop Header 117,941.00





1030 SPFH 7000 Series wide crop flow channel Same Price






630.00





List PriceSuggested

USD ($)

HEADER DRIVE CONNECTION ...Continued...




SPFH also needs to have the option Advance Header Control (AHC)4,155.00

8210 Advanced Header Control (AHC) - automatic header height control for 8000 series SPFHSPFH also needs to have the option Advance Header Control (AHC)

4,155.00




2,357.00


Includes 8 pc311.00





MountingRotary crop header with integral mounting frame forattachment to a SPFHHeight-adjustable jack standsMulti-coupler for all hydraulic and electricconnections (8000 series)Drive lineSingle speed main transmission (8000 series)Power is transmitted by closed oil bath gearboxesand safety clutchesTwo liquid-cooled main friction clutchesStandard header drive connection for PTO-shaftCutting systemRow-independent cutting system with high-speedcutting rotorsCuts across the entire working width usingenclosed saw-type rotor blades with replaceablesegmentsBlades coated with tungsten carbideCrop transportEven bundling and intake of the crop lengthwise tothe chopping unitOptimal quality of cut through compact and clean

bundlingOptimised intake of down crop thanks to lowoutside points and aggressive gathering drumsBolt-on easy changeable cleaners on all drumsRoad transportOuter gathering drums hydraulically double foldablefor road transportCounterweights should be in compliance withgovernment road regulations

Technical specificationsLength 2780 mmOverall width 7550 mmWorking width 7500 mmTransport width 3000 mmHeight 1520 mm


List PriceSuggested

USD ($)






MOUNTING FRAMES1030 SPFH 7000 Series wide crop flow channel Same Price






630.00





List PriceSuggested

USD ($)




SPFH also needs to have the option Advance Header Control (AHC)4,155.00

8210 Advanced Header Control (AHC) - automatic header height control for 8000 series SPFHSPFH also needs to have the option Advance Header Control (AHC)

4,155.00




2,357.00







Engine:Max. Power at 1900 rpm.279 kW (375 hp/380PS) 9L Engine.Permanent fan drive by engine.Drive System:Road Mode with Fuel Saving Function ( engine rpm toidle when moving MFL in neutral).HD final drives 95:10 gear ratio / 10 wheel studson 335mm circle.Operator's Cab:Premium Cab.HVAC - Heating, Ventilation and Air Conditioning.Deluxe seat with air suspension.Training seat with seat belt.CommandTouch Operator Control Console.Primary cornerpost display unit.Adjustable steering column & telescopic steeringwheel.Multi-function master control lever integrated inseat armrest.Radio Installation Package.Convenience outlets for power.Video ready cab.JDLink Telematics ready.Automatic header detection via multicoupler.Lighting system:- 4 * Cab Roof Lights (1, 2 , 7 and 8).- 2 * Worklight Rail Front.- 2 * Low Beam.- 2 * High Beam.- 2 * Work light Rear.- 2* Spout Worklight.- 1 * Ladder Lamp.- 2 * Rotary Beacon light.- 2 * Row finder light.- 2 * Position Light Front / Turn Light Front.- 2 * Tail Light / Stop Light / Turn Light Rear.- 2 * License plate light .- 1 * Service Light Toolbox.- 1 * Service Compartment.Feedroll Housing:Lower front feed roll with replaceable serratedbars.4 Feedrolls.2 upper feedrolls.2 lower feedrolls.Metal Detector intergrated in lower front feedroll.Feedroll Springs.4 feedroll springs.LOC.

Infinitely Variable Length of Cut.Cutterhead:Cutterhead speed.1100 rpm.Cutterhead width / diameter.686 mm width / 670 mm diameter.Remote & automatic knife sharpening system.Remote & automatic shearbar adjustment.Accelerator:Accelerator speed.1800 rpm.Accelerator width / diameter.540 mm width / 560 mm diameter.Spout :210° turning angle.Electrical System:200 amp.12 V.1 x 200 A alternator.Number of 12 V - 174 AH 1 wet charged batterie.12V power outlet (switchable) located in serviceroom.3rd party Silage additive pump control port.12V power outlet located in service room.12V power outlet located in toolbox compartment.Hydraulics:Hydrostatic variable headerdrive.Hydrostatic variable feedrolldrive.Single acting hydraulic SCV front .Double acting hydraulic SCV front.Standard header drive.Chassis:Pivoting attaching frame for front end equipment.Header lift cylinders.80mm.Tank System:1100 L Diesel.43 L DEF tank.20 L Water for Handwashing.MISCELLANEOUS:Integrated storage compartment with bracket forToolbox.Integrated battery compartment with main batteryswitch.


List PriceSuggested

USD ($)


BASE MACHINE2728Z 8100 SPFH NA 310,443.00

DESTINATION


8100 SPFH NAEquipment for Base Machine



List PriceSuggested

USD ($)

DESTINATION ...Continued...

North America0184 Canada

EUstage IV engine (FT4)max. 30km/h travel speed allowed in 3-Gear, 40km/h in ProDriveRequires Guidance Ready 181525 L additional fuel for RORO shippingRear Camera, Displayed on CommandTouchGrain Panel kit (bypacked)

1,309.00

0202 United StatesEUstage IV engine (FT4)max. 30km/h travel speed allowed in 3-Gear, 40km/h in ProDriveWithout JDLink not available25 L additional fuel for RORO shippingRear Camera, Displayed on CommandTouchGrain Panel kit (bypacked)

1,309.00


PACKAGE CONFIGURATIONS0500 without Package In Base Price

AG MANAGEMENT SOLUTIONS PACKAGES1910 Without i Feature -5,018.00

1911 "i" ReadyMass Flow Sensor Factory installed, HarvestLab ready, display mount railRequires code 8144 - Display mount railNote: HarvestLab Sensor from 7000 Series not compatible with 8000 Series SPFH

In Base Price

1912 "i" Ready packageMass Flow Sensor and HarvestLab Sensor Factory installed, display mount rail, I decalRequires code 8185 - HLAB 3000Requires code 8144 - Display mount rail

Same Price

GUIDANCE1800 Without Guidance In Base Price

1815 Guidance ReadyManual RowSense Ready and AutoTrac ReadyHeader sensors needs to be ordered separatelyTo use RowSense your header needs to be equipped with RowSense feelers.No Activation required to use Manual RowSense.To use AutoTrac a Starfire Receiver and a separate AT activation are required.

4,487.00

DISPLAY1823 GreenStar 3 Command Center (Touch 7'' / 18 cm Display)

Harvest Monitor onlyIn Base Price

1825 GreenStar 3 2630 Display Mounted on Armrest (10'' / 26 cm Display)Enables Documentation

4,635.00


8100 SPFH NAContinued



List PriceSuggested

USD ($)

DISPLAY ...Continued...Enables Mapping if ordered with SF6000 Receiver

1827 GreenStar 3 Command Center on armrest and GS3 2630 Display mounted on Display railRequires 8144 - Display mount rail

5,895.00

RECEIVER1832 Without Receiver In Base Price

1840 StarFire 6000 Receiver- SF1Enables Mapping if ordered with GS3 2630 Display ( code 1825 or 1827)

3,895.00

JDLINKMachine connectivity functions require cellular coverage.Options with JDLink include the following hardware (unless otherwise noted):- JDLink hardware: integrated cab wiring harness, antenna, and Modular Telematics Gateway(MTG).- 1 Ethernet harness connecting the MTG to the primary display/integrated processor.- 1 Ethernet harness routed from the MTG to the optional display port.- Antenna wiring harness for the Machine Communication Radio (MCR)- Additional Ethernet wiring harnesses may be required to connect GS3 2630 universal displaywhen field installed.Features with JDLink Connect subscription include (unless otherwise noted):- JDLink machine measurements, Service ADVISOR Remote, Remote Display Access, WirelessData Transfer, visualized in online and dealer support tools. See Ag Sales Manual for details.Features with JDLink Connect Upgrade subscription include:- Wireless Data Transfer and online tools.Features with JDLink Access + RDA subscription include (unless otherwise noted):- JDLink machine measurements, Service ADVISOR Remote, Remote Display Access,visualized in online and dealer support tools. See Ag Sales Manual for details.Features with JDLink Access subscription include (unless otherwise noted)- JDLink machine measurements, Service ADVISOR Remote, visualized in online and dealersupport tools. See Ag Sales Manual for details.Subscription length of contract varies; Subscription renewal required after term of service forcontinued functionality. Option availability limited by specific geographical regions. Pleaserefer to region and country specific price page section for appropriate order codes.

188U JDLink Hardware only - Subscription Not IncludedIncludes JDLink hardware: integrated cab wiring harness, antenna, modular telematicsgateway (MTG), Ethernet harnesses, and Machine Communication Radio antenna harness.Ethernet harnesses may vary per configuration.Does not include a JDLink Subscription, Machine Communication Radio and antenna.Requires subscription for JDLink functionality. Subscription availability through dealers thatmeet New Model Qualification requirements. Subscription sales process may vary by country.Available for customers who do not choose to use the JDLink service and dealers that do notmeet New Model Qualification requirements.

No Charge

188N JDLink Connect Upgrade 1 Year plus JDLink Access + RDA 5 Year subscriptionIncludes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription, 1 yearJDLink Connect Upgrade subscription, 5 years JDLink Access + RDA subscription (5 totalyears subscription), Ethernet harnesses, and Machine Communication Radio antenna harness.Does not include the Machine Communication Radio and antenna.Note: When GreenStar 3 2630 Display is mounted on cornerpost, Ethernet cable(order from Service parts) is required to connect Display to MTG.


In Base Price





List PriceSuggested

USD ($)

JDLINK ...Continued...Only available through dealers that meet New Model Qualification requirements.

188S JDLink Connect 5 Year SubscriptionIncludes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription,5 year JDLink Connect subscription, Ethernet harnesses, and MachineCommunication Radio antenna harness.Does not include the Machine Communication Radio and antenna.Note: When GreenStar 3 2630 Display is mounted on cornerpost, Ethernet cable(order from Service parts) is required to connect Display to MTG.

Use of this service, and all rights and obligations of John Deere and the Customer (asidentified in the applicable agreement), are governed by the terms and conditions outlined inthe applicable Services and Software agreements available atwww.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do notproceed and do not use the service.Note: Only available in the United States, Canada, Australia, and New Zealand throughdealers that meet New Model Qualification requirements.

1,600.00

ACTIVATIONS1845 Without Autotrac Activation In Base Price

1847 AutoTrac Activation - GS3Includes AutoTrac functionalityRequires Guidance Ready, code 1815

3,500.00

1846 AutoTrac and AutoTrac RowSense Activation - GS3Includes AutoTrac and AutoTrac RowSense functionalityRequires Guidance Ready, code 1815

6,500.00

SEAT1220 Deluxe Seat In Base Price

1221 Premium cloth seat 503.00

1222 Premium leather seatLeather, heated, passively ventilated operator seat with enhanced air suspension, leatherinstructor seat, and leather wrapped steering wheel.

2,061.00

RADIO1411 Radio Ready

Radio Ready with 2 Pre-wired Speakers and Antenna.In Base Price

1415 Premium Radio PackageAM/FM Stereo, MP3 file support via USB port, Remote Controls, USB port in right handstorage console, Auxiliary Input Jack located in right hand storage console, Bluetooth®capable including microphone, Integrated Bluetooth Phone Book connection throughCommandCenter, Audio-Streaming with compatible Bluetooth devices, Two Speakers,Subwoofer, and External Antenna.Radio is XM ready-XM functionality can be upgraded by purchasing an XM antenna hardwareand subscription via your local electric hardware dealers

356.00

MIRRORS1310 2 rear view mirrors manually adjustable In Base Price





List PriceSuggested

USD ($)

MIRRORS ...Continued...

1320 2 rear view mirrors electrically adjusted and heated 789.00

LIGHTING1361 4 HIR (infrared) working lights in the cab roof In Base Price

1378 Premium Lighting Package (LED)Eight cab roof mounted lights: Four overhead LED worklights, two halogen high beam drivinglights and two halogen low beam driving lights.

1,984.00

TRANSMISSION2057 PBST with 30 km/h speed version

3 Speed Transmission (High Torque) Electric Shift & Electric BrakeIn Base Price

2063 ProDrive Transmission in 40 km/h version (25 mph)includes engine speed management (road and field mode)

13,943.00

REAR AXLE2210 2WD - Non Powered, non-adjustable axle In Base Price

2230 4WD - Non-adjustable, Hydro mechanical powered axle 25,811.00

2235 4 WD - ProDrive full ASR non-adjustable, hydro mechanical powered axle 26,925.00

ADVANCED HEADER HEIGHT CONTROL2400 Without Advanced Header Control

Passive Lateral tiltIn Base Price

2415 Advanced Header Control (AHC)Automatic header height control (Ground contour following) in cornActive Lateral Tilt

3,970.00

HEADER CONNECTION2420 Free Motion U-joint for mechanical Header Drive In Base Price

2425 Automatic PTO Coupler for mechanical Header DriveHeader needs to be ordered also with compatible coupling

630.00

HEADER DRIVE2430 Standard variable header drive -6,057.00

2431 Dual Header DriveRequired when pick-up is equipped with an auxiliary drive (2nd hydraulic drive for the pick-upreel)

In Base Price

MACHINE CONFIGURATION





List PriceSuggested

USD ($)

MACHINE CONFIGURATION ...Continued...2700 Standard wear machine In Base Price

2722 Dura Line PremiumRecommended if you harvest corn and grass in standard conditions.

Includes Dura Line coating for: spiral band, accelerator band.Spout flap, lower spout wear liners, mid spout wear liner, front chute base liner.Requires Dura Line Plus Shearbar with Grass knives (code 4017) or with Corn knives (code4018)

5,004.00

2723 Dura Line UltimateRecommended for very abrasive conditions.

Includes Dura Line coating for: spiral band, accelerator band, front chute base liner and sideliner, grass chute, accelerator side wall liners, smooth roll scraper.Spout flap, lower spout wear liners, mid spout wear liner.Requires Dura Line Plus Shearbar with Grass knives (code 4017) or with Corn knives (code4018)Requires Dura Line cutterhead knife bracket (code 4070)

6,504.00

GREASE SYSTEM2515 Auto Lube System

controls automatically the grease supply to grease pointsIn Base Price

CUTTERHEAD4005 40 Knife Bracket Dura-Drum cutterhead

Length of Cut 7-26mm1100 rpm Cutterhead speed

In Base Price

4007 48 Knife Bracket Dura-Drum cutterheadLength of Cut 6-22mm1100 rpm Cutterhead speed

419.00


952.00

CUTTERHEAD KNIFE HOLDER4060 Standard cutterhead knife holder In Base Price

4070 Dura Line cutterhead knife holderProvides maximum knife holder wear life.

1,288.00

CUTTERHEAD KNIFE AND SHEAR BAR4010 Grass knives and grass shearbar In Base Price

4012 Corn knives and corn shearbar 328.00

KERNEL PROCESSOR3711 Grass Chute Only

without drive parts for Kernel ProcessorIn Base Price





List PriceSuggested

USD ($)

KERNEL PROCESSOR ...Continued...

3713 Grass Chute Only , prepared for Kernel Processor or KernelStarIncludes tensioner (KP tensioning drive belt mechanism ) and does not include drive pulley onblower shaft, neither belt.

1,733.00

3743 Grass Chute and Whole Crop KP178 triangle teeth and 32% speed differential

24,352.00

3744 Grass Chute and Milo KP238 triangle teeth and 32% speed differential

24,352.00

3738 Grass Chute and USA Heavy Duty-Dura Line KP118 teeth and 32% speed differential, rear roll reversed

25,310.00

3772 Grass Chute and KernelStar2 32,129.00

SPOUT5590 Without Spout

Not orderable with Automatic spout positioning (code 8112)Not orderable with Dura Line packages (codes 2721, 2722, 2723 )

-5,359.00

5591 Short Flat Spout -850.00

5594 Long Flat Spout -161.00

5597 High Arch Spout for 8 Row and Pick upRecommended when side loading into open wagon, trucks or trailers.10 and 12 row spout extensions are ordered separately.

In Base Price

HITCH6400 Without trailer hitch In Base Price

FRONT WHEELS AND TIRES

3.3m Machine Widh6718 Increased Flexion 800/70 R38 179D Axiobib

Front tires; 3.3 m Machine WidthRequires brand preference Code 9663 (Michelin )Requires Rear Tire code 6612, 6613, 6616 or 6624

In Base Price

6725 800/70 R38 178D SFTFront tires; 3.3 m Machine WidthRequires Brand Preference code 9679 (Mitas )Requires Rear Tire code 6612, 6616 or 6613

-1,026.00

6711 710/75 R42 175D SFTRequires Rear Tire code 6613 ,6612, 6616 or 6624Front tires; 3.3 m Machine WidthRequires Brand Preference code 9679 (Mitas )

512.00

6735 Increased Flexion 710/75 R42 176D Axiobib / TM1000HPFront tires; 3.3 m Machine WidthRequires Brand Preference code 9663 (Michelin ) or code 9670 (Trelleborg )Requires Rear Tire code 6612, 6613, 6616 or 6624

736.00





List PriceSuggested

USD ($)

FRONT WHEELS AND TIRES ...Continued...6713 710/70 R42 173D SFT

Front tires; 3.3 m Machine WidthRequires Brand Preference code 9679 (Mitas )Requires Rear Tire code 6612, 6613, 6616 or 6624

-1,980.00

3.5m Machine Width6723 900/60 R42 180D TM900HP

Front tires; 3.5 m Machine WidthRequires Brand Preference code 9670 (Trelleborg )Requires Rear Tire code 6612, 6613, 6627, 6626, 6624, 6625, 6636, 6616 or 6615

1,938.00

670A Increased Flexion 900/60 R42 186D AxiobibFront tires; 3.5 m Machine WidthRequires Brand Preference code 9663 (Michelin )Requires Rear Tire code 6612, 6613, 6627, 6626, 6624, 6625, 6636 , 6616 or 6615

2,808.00

6721 900/60 R38 178A8 SFTFront tires; 3.5 m Machine WidthRequires Brand Preference code 9679 (Mitas )Requires Rear Tire code 6612, 6613, 6627, 6626, 6624, 6625, 6636, 6616 or 6615

-904.00

Over 3.5m Machine Width6719 800/70 R38 178D SFT,Wide Stance

Front tires; >3.5 m Machine Width: wide stance 120"Requires Brand Preference code 9679 (Mitas )Requires Rear Tire code 6613, 6624, 6625, 6616 or 6612

-259.00

6737 Increased Flexion 800/70 R38 179D AxiobibFront tires; >3.5 m Machine Width: wide stance 120"Requires Brand Preference code 9663 (Michelin )Requires Rear Tire code 6613, 6624, 6625, 6616 or 6612

3,554.00

6712 710/70 R42 173D SFT,Wide stanceFront tires; >3.5 m Machine Width: wide stance 120"Requires Brand Preference code 9679 (Mitas )Requires Rear Tire code 6613, 6624, 6625, 6616 or 6612

-616.00


1,004.00

670B Increased Flexion 900/60 R42 186D AxiobibFront tires; >3.5 m Machine Width: wide stance 120"Requires Brand Preference code 9663 (Michelin )Requires Rear Tire code 6613, 6624, 6625, 6616 or 6612

4,172.00

6780 520/85 R46 158A8 DualsRequires Brand Preference code 9679 (Mitas ) or 9663 (Michelin )Requires Rear Tire code 6613, 6624, 6625, 6616 or 6612

3,669.00

REAR WHEELS AND TIRES6612 620/70 R30 178A8 IMP SFT

Requires Brand Preference code 9665 (Mitas )In Base Price

6624 Increased Flexion 620/75 R30 164D AxiobibRequires Brand Preference code 9667 (Michelin )

1,692.00





List PriceSuggested

USD ($)

REAR WHEELS AND TIRES ...Continued...

6613 650/60 R34 159D TM900HPRequires Brand Preference code 9678 (Trelleborg )

-570.00

6616 IF 650/60 R34 165D Michelin AxiobibRequires Brand Preference code 9663 (Michelin )

1,824.00

6615 710/60 R30 162D SFTRequires Brand Preference code 9665 (Mitas )

324.00


1,024.00

6626 Very High Flexion 710/60 R30 167D VT-TractorRequires Brand Preference code 9686 (Bridgestone )

4,054.00


490.00

6636 750/65 R26 166A8 MegaxbibRequires Brand Preference code 9667 (Michelin )

2,922.00

BALLASTFollowing weights are available factory installed, please refer to the table in the sales manual

7300 Without ballasting In Base Price

7374 4 Sets weight plates ((240kg) - 8 plates in total 1,193.00

7377 7 Sets weight Plates (420kg) - 14 plates in total 2,042.00




FIRE EXTINGUISHER1606 2.5 gal water fire extinguisher (Amerex Mod 240) and 6kg powder fire extinguisher pressure

pre-chargedIn Base Price

OPERATOR'S MANUAL AND DECALS9013 French OM as additional language

translation of NA versionNo Charge

9037 Spanish OM as additional languagetranslation of NA version

No Charge

9049 Parts Catalog No Charge

AG MANAGEMENT SOLUTIONS8185 HarvestLab 3000 18,250.00





List PriceSuggested

USD ($)

AG MANAGEMENT SOLUTIONS ...Continued...8191 John Deere Constituent Sensing-Forage Bundle

Includes a one-time activation through Stellar Support.Requires HarvestLab SensorIncludes fresh and ensiled calibration files for the following crop types.Corn/corn silage: moisture, dry matter, crude protein, starch, NDF, ADFHaylage (Alfalfa): moisture, dry matter, crude protein, sugar NDF, ADFSmall grains/small grain silage (whole crop silage): moisture, dry matter, crude protein,sugar, NDF, ADFnot orderable with 1910

3,865.00

SEAT8122 Leather steering wheel

Not available with 1222, automatically included.136.00

LIGHTING8142 Deluxe Service Light Package

Engine compartment back, engine compartment left and right, cutterhead lightNot orderable with 8147 Premium service lighting

567.00

8147 Premium service lighting (as LED)Includes LED lights at Engine compartment back, engine compartment left and right,cutterhead light,Replaces 1 standard (halogene) light in service compartment with LED lightNot orderable with 8142 Deluxe Service lighting package

644.00

8143 Deluxe Worklight PackageIncludes 2 fascia lights, 2 worklights lower/ Driving lights lower, 2 worklight rail front, 2 workLight side in addition to base lightsNot orderable with 8148 Premium worklight package

607.00

8148 Premium worklight Package (as LED)Includes LED lights: 2 fascia lights, 2 worklights lower/ Driving lights lower, 2 worklight railfront, 2 work Light side,Replaces standard lights with LED lights: 2 work lights rail front, 2 work lights rear, 2 spoutwork lights, 2 row finder lights.Additional work lights at spout base are only added with Active Fill Control (code 8529)."Not orderable with 8143 Deluxe worklight package

1,217.00

8784 LED beacon lightsstandard beacon lights will be replaced by LED type

153.00

OPERATOR'S STATION8139 Refrigerator 842.00

8140 Lateral (LH and RH) and rear window wiper and washer 721.00

8144 Display mount railIncludes ethernet harness to connect Display to MTG

100.00

8146 Footpegs 40.00

MISCELLANEOUS8710 Air Compressor package

includes nozzle, hose, tank3,432.00





List PriceSuggested

USD ($)

MISCELLANEOUS ...Continued...

ADDITIVE APPLICATION SYSTEM8801 Additive tank and dosing system, factory installed

pump, pipes, control on CommandTouch,360LTankrecommended to use with mass flow sensorRequired if water injection is ordered as kit

4,065.00

8802 Additive dosing system twin line (ADS - TL)Additive dosing system twin line, 30L tankRequires 8801

http://dlrdoc.deere.com/sales/salesmanual/en_GB/hay_forage/2017/feature/spfh/crop_delivery/silage_dosing_options_8000spfh.html

1,684.00

FEEDROLLS8319 Stone detection system

Includes Feedroll dampening System, not orderable with code 83213,055.00

8321 Feedroll Dampening SystemRecommended for lengths of cut above 16 mm (.62 inches).Recommended for uneven windrowed crops.Recommended for light crop conditions.Recommended for varying corn conditions.

1,200.00

CUTTERHEAD9415 CH recutter floor

Spiral floor with replaceable knives (bypacked)Reduces long leaves in dry corn conditionsNot available with Dura Line coating

1,361.00

FEEDROLLSGrain Panel Kit (code 9325) in Base for US -base codes and in Base for Australia and NewZealand

9326 Feedroll Sealing Kit (bypacked)For use when harvesting ear cornIncludes side feedroll side wall panels

358.00

KERNEL PROCESSOR8376 Electrical Kernel Processor gap adjustment

Not with Grass Chute Only or KP ready (not with 3711,3713)733.00

8380 Crane for KP removal complete with electric winchHighly recommended when KP is installed

1,191.00

KERNEL PROCESSOR9389 40% Speed differential

Pulley and belt bundle bypackedOnly available with 3738, 3743 or 3744

653.00





List PriceSuggested

USD ($)


SPOUT AND CONTROLS8112 Automatic Spout positioning - Active Fill Control Ready

Not orderable without a spout (code 5590)844.00

8535 ProTouchAutomatic road / field preparationRequires 8112 Automatic spout positioning

358.00

8117 Spout CameraNot orderable without a spout (code 5590)Only works with GS3 2630 Display on Rail or Motec display (attachments section) with videoinput

832.00

8529 Active Fill Control (AFC)New : includes Rear Unloading functionsworks in straight line onlyIncludes 2 additional LED work lights at spout base.Replaces standard spout work lights with LED lights".Requires a StarFire ReceiverRequires 8112 - Automatic Spout positioning - Active Fill Control Ready.For optional video feed a GS3 2630 Display on Rail or Motec display (attachment section)with video input is required.Requires 5597 - High Arch Spout 8 Row/Pick up.

9,872.00

SPOUT9551 10 Row Extension, High Arch

for machines without Active Fill ControlRequires 5597 - High Arch Spout 8 Row/Pick up

1,537.00

9554 10 Row Extension, High Arch (bypacked) - for AFCwith wiring harness extension for Active Fill ControlRequires 5597 - High Arch Spout 8 Row/Pick up

2,065.00

FRONT TIRE BRAND PREFERENCE9663 Michelin Brand Preferred - Front Tire No Charge

9670 Trelleborg Brand Preference - Front Tire No Charge

9685 Bridgestone Brand Preference - Front Tire No Charge

9679 Mitas Brand Preference - Front Tire No Charge

REAR TIRE BRAND PREFERENCE9678 Trelleborg Brand Preference - Rear Tire No Charge

9667 Michelin Brand Preference - Rear Tire No Charge

9665 Mitas Brand Preference - Rear Tire No Charge

9686 Bridgestone Brand Preference - Rear Tire No Charge





List PriceSuggested

USD ($)

HYDRAULICS8602 Hydraulic actuated rear outlet Regular flow 30 l/mn

Not orderable with High Flow wagon dump code 86031,289.00

8603 High flow hydraulic actuated rear outlet High flow 100 l/mnNot orderable with Hydr. Outlet for wagon dump code 8602

4,547.00

ENGINE BLOCK HEATER8700 110 Volt engine block heater 104.00

ETHER STARTING AID8702 Ether starting kit 113.00

EXHAUST8715 Stainless steel exhaust pipe 305.00




Engine.Max. Power at 1900 rpm.317 kW (425 hp/431PS) 9L Engine.Permanent fan drive by engine.

Drive System:Road Mode with Fuel Saving Function ( engine rpm toidle when moving MFL in neutral).HD final drives 95:10 gear ratio / 10 wheel studson 335mm circle.

Operator's Cab:Premium Cab.HVAC - Heating, Ventilation and Air Conditioning.Deluxe seat with air suspension.Training seat with seat belt.CommandTouch Operator Control Console.Primary cornerpost display unit.Adjustable steering column & telescopic steeringwheel.Multi-function master control lever integrated inseat armrest.Radio Installation Package.Convenience outlets for power.Video ready cab.JDLink Telematics ready.Automatic header detection via multicoupler.

Lighting system:- 4 * Cab Roof Lights (1, 2 , 7 and 8).- 2 * Worklight Rail Front.- 2 * Low Beam.- 2 * High Beam.- 2 * Work light Rear .- 2* Spout Worklight.- 1 * Ladder Lamp .- 2 * Rotary Beacon light .- 2 * Row finder light.- 2 * Position Light Front / Turn Light Front.- 2 * Tail Light / Stop Light / Turn Light Rear.- 2 * License plate light .- 1 * Service Light Toolbox.- 1 * Service Compartment.

Feedroll Housing:Lower front feed roll with replaceable serratedbars.4 Feedrolls.2 upper feedrolls.2 lower feedrolls.Metal Detector intergrated in lower front feedroll.Feedroll Springs.4 feedroll springs.LOC.Infinitely Variable Length of Cut.

Cutterhead:Cutterhead speed.1100 rpm.Cutterhead width / diameter.686 mm width / 670 mm diameter.Remote & automatic knife sharpening system.Remote & automatic shearbar adjustment.

Accelerator :Accelerator speed .1800 rpm .Accelerator width / diameter.540 mm width / 560 mm diameter.Spout :210° turning angle.

Electrical System:200 amp.12 V .1 x 200 A alternator.Number of 12 V - 174 AH 1 wet charged batterie.12V power outlet (switchable) located in serviceroom.3rd party Silage additive pump control port.12V power outlet located in service room.12V power outlet located in toolbox compartment.

Hydraulics:Hydrostatic variable headerdrive.Hydrostatic variable feedrolldrive.Single acting hydraulic SCV front .Double acting hydraulic SCV front.Standard header drive.

Chassis:Pivoting attaching frame for front end equipment.Header lift cylinders.80mm.

Tank System:1100 L Diesel.43 L DEF tank.20 L Water for Handwashing.

MISCELLANEOUS:Integrated storage compartment with bracket forToolbox.Integrated battery compartment with main batteryswitch.


List PriceSuggested

USD ($)



DESTINATION





List PriceSuggested

USD ($)




1,309.00


1,309.00





In Base Price


Same Price



4,487.00




4,635.00





List PriceSuggested

USD ($)



5,895.00



3,895.00



No Charge



In Base Price





List PriceSuggested

USD ($)




1,600.00



3,500.00


6,500.00




2,061.00




356.00






List PriceSuggested

USD ($)





1,984.00




13,943.00







3,970.00



630.00



In Base Price






List PriceSuggested

USD ($)




5,004.00



6,504.00





In Base Price


419.00


952.00



1,288.00









List PriceSuggested

USD ($)



1,733.00


24,352.00


24,352.00


25,310.00




-5,359.00




In Base Price





In Base Price


-1,026.00


512.00


736.00





List PriceSuggested

USD ($)



-1,980.00



1,938.00


2,808.00


-904.00



-259.00


3,554.00


-616.00


1,004.00


4,172.00


3,669.00




1,692.00





List PriceSuggested

USD ($)



-570.00


1,824.00


324.00


1,024.00


4,054.00


490.00


2,922.00













No Charge







List PriceSuggested

USD ($)



3,865.00





567.00


644.00


607.00


1,217.00


153.00




100.00

8146 Footpegs 40.00







List PriceSuggested

USD ($)

MISCELLANEOUS ...Continued...



4,065.00



1,684.00




1,200.00



1,361.00



358.00




1,191.00



653.00





List PriceSuggested

USD ($)





358.00


832.00


9,872.00



1,537.00


2,065.00













List PriceSuggested

USD ($)




4,547.00







Engine:Max. Power at 1800 rpm.360 kW (483 hp/490 PS ) 13,5L Engine.Permanent fan drive by engine.



Lighting system:- 4 * Cab Roof Lights (1, 2 , 7 and 8).- 2 * Worklight Rail Front.- 2 * Low Beam.- 2 * High Beam.- 2 * Work light Rear.- 2* Spout Worklight.- 1 * Ladder Lamp.- 2 * Rotary Beacon light.- 2 * Row finder light.- 2 * Position Light Front / Turn Light Front.- 2 * Tail Light / Stop Light / Turn Light Rear.- 2 * License plate light.- 1 * Service Light Toolbox.- 1 * Service Compartment.



Accelerator:Accelerator speed.1800 rpm.Accelerator width / diameter.540 mm width / 560 mm diameter.

Spout:210° turning angle.

Electrical System:200 amp.12 V.1 x 200 A alternator.Number of 12 V - 154 AH 2 wet charged batteries.12V power outlet (switchable) located in serviceroom.3rd party Silage additive pump control port.12V power outlet located in service room.12V power outlet located in toolbox compartment.






List PriceSuggested

USD ($)







List PriceSuggested

USD ($)

DESTINATION



1,309.00


1,309.00





In Base Price


Same Price



4,487.00



1825 GreenStar 3 2630 Display Mounted on Armrest (10'' / 26 cm Display) 4,635.00





List PriceSuggested

USD ($)

DISPLAY ...Continued...Enables DocumentationEnables Mapping if ordered with SF6000 Receiver


5,895.00



3,895.00



No Charge


Use of this service, and all rights and obligations of John Deere and the Customer (asidentified in the applicable agreement), are governed by the terms and conditions outlined inthe applicable Services and Software agreements available atwww.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not

In Base Price





List PriceSuggested

USD ($)

JDLINK ...Continued...proceed and do not use the service.Only available through dealers that meet New Model Qualification requirements.



1,600.00



3,500.00


6,500.00




2,061.00




356.00

MIRRORS





List PriceSuggested

USD ($)

MIRRORS ...Continued...1310 2 rear view mirrors manually adjustable In Base Price




1,984.00




13,943.00







3,970.00



630.00



In Base Price






List PriceSuggested

USD ($)




5,004.00



6,504.00





In Base Price


419.00

4008 56 Knife Bracket Dura-Drum cutterheadLength of Cut 4-17mm1200 rpm Cutterhead Speed

952.00



1,288.00









List PriceSuggested

USD ($)



1,733.00


24,352.00


24,352.00


25,310.00




-5,359.00




In Base Price





In Base Price


-1,026.00


512.00


736.00





List PriceSuggested

USD ($)



-1,980.00



1,938.00


2,808.00


-904.00



-259.00


3,554.00


-616.00


1,004.00


4,172.00


3,669.00




1,692.00





List PriceSuggested

USD ($)



-570.00


1,824.00


324.00


1,024.00


4,054.00


490.00


2,922.00













No Charge







List PriceSuggested

USD ($)



3,865.00





567.00


644.00


607.00


1,217.00


153.00




100.00

8146 Footpegs 40.00

HEADER CONNECTION8424 Heavy Duty Header Drive

Required for harvesting with Direct Cut Header or earlage heads805.00





List PriceSuggested

USD ($)

HEADER CONNECTION ...Continued...





4,065.00



1,684.00




1,200.00



1,361.00



358.00




1,191.00





List PriceSuggested

USD ($)

KERNEL PROCESSOR ...Continued...8383 Heavy Duty KP Drive (6 grooves) 537.00



653.00




358.00


832.00


9,872.00



1,537.00


2,065.00










List PriceSuggested

USD ($)

REAR TIRE BRAND PREFERENCE ...Continued...9667 Michelin Brand Preference - Rear Tire No Charge






4,547.00







Engine:Max. Power at 1800 rpm.397 kW (532 hp/540PS) 13,5L Engine.Permanent fan drive by engine.



Lighting system:- 4 * Cab Roof Lights (1, 2 , 7 and 8).- 2 * Worklight Rail Front.- 2 * Low Beam.- 2 * High Beam.- 2 * Work light Rear.- 2* Spout Worklight.- 1 * Ladder Lamp.- 2 * Rotary Beacon light.- 2 * Row finder light.- 2 * Position Light Front / Turn Light Front.- 2 * Tail Light / Stop Light / Turn Light Rear.- 2 * License plate light.- 1 * Service Light Toolbox.- 1 * Service Compartment.


Cutterhead:Cutterhead speed.1100 rpm.Cutterhead width / diameter.686 mm width / 670 mm diameter.Remote & automatic knife sharpening system .Remote & automatic shearbar adjustment.



Electrical System:200 amp.12 V.1 x 200 A alternator .Number of 12 V - 154 AH 2 wet charged batteries.12V power outlet (switchable) located in serviceroom.3rd party Silage additive pump control port.12V power outlet located in service room.12V power outlet located in toolbox compartment.

Hydraulics:Hydrostatic variable headerdrive.Hydrostatic variable feedrolldrive.Single acting hydraulic SCV front.Double acting hydraulic SCV front.Standard header drive.


Tank System1100 L Diesel.43 L DEF tank.20 L Water for Handwashing.



List PriceSuggested

USD ($)







List PriceSuggested

USD ($)

DESTINATION



1,309.00


1,309.00





In Base Price


Same Price



4,487.00








List PriceSuggested

USD ($)



5,895.00



3,895.00



No Charge



In Base Price





List PriceSuggested

USD ($)




1,600.00



3,500.00


6,500.00




2,061.00




356.00

MIRRORS





List PriceSuggested

USD ($)





1,984.00




13,943.00







3,970.00



630.00



In Base Price






List PriceSuggested

USD ($)




5,004.00



6,504.00





In Base Price


419.00


952.00



1,288.00









List PriceSuggested

USD ($)



1,733.00


24,352.00


24,352.00


25,310.00




-5,359.00




In Base Price





In Base Price


-1,026.00


512.00


736.00





List PriceSuggested

USD ($)



-1,980.00



1,938.00


2,808.00


-904.00



-259.00


3,554.00


-616.00


1,004.00


4,172.00


3,669.00




1,692.00





List PriceSuggested

USD ($)



-570.00


1,824.00


324.00


1,024.00


4,054.00


490.00


2,922.00













No Charge







List PriceSuggested

USD ($)



3,865.00





567.00


644.00


607.00


1,217.00


153.00




100.00

8146 Footpegs 40.00







List PriceSuggested

USD ($)






4,065.00



1,684.00




1,200.00



1,361.00



358.00




1,191.00





List PriceSuggested

USD ($)




653.00




358.00


832.00


9,872.00

8534 Folding spout readyIncludes hydraulic valves for folding spoutRequired for 12 row extensions

1,049.00



1,537.00


2,065.00









List PriceSuggested

USD ($)








4,547.00







Engine:Max. Power at 1800 rpm.430 kW (577 hp/585PS) 13,5L Engine.Permanent fan drive by engine.


Operator's Cab:Premium Cab.HVAC - Heating, Ventilation and Air Conditioning.Deluxe seat with air suspension.Training seat with seat belt.CommandTouch Operator Control Console.Primary cornerpost display unit.Adjustable steering column & telescopic steeringwheel.Multi-function master control lever integrated inseat armrest.Radio Installation Package .Convenience outlets for power.Video ready cab.JDLink Telematics ready.Automatic header detection via multicoupler.

Lighting system:- 4 * Cab Roof Lights (1, 2 , 7 and 8).- 2 * Worklight Rail Front.- 2 * Low Beam.- 2 * High Beam.- 2 * Work light Rear.- 2* Spout Worklight.- 1 * Ladder Lamp.- 2 * Rotary Beacon light.- 2 * Row finder light .- 2 * Position Light Front / Turn Light Front.- 2 * Tail Light / Stop Light / Turn Light Rear.- 2 * License plate light .- 1 * Service Light Toolbox.- 1 * Service Compartment.





Electrical System:200 amp.12 V.1 x 200 A alternator .Number of 12 V - 154 AH 2 wet charged batteries.12V power outlet (switchable) located in serviceroom.3rd party Silage additive pump control port.12V power outlet located in service room.12V power outlet located in toolbox compartment.



Tank System:1100 L Diesel43 L DEF tank20 L Water for Handwashing

MISCELLANEOUSIntegrated storage compartment with bracket forToolboxIntegrated battery compartment with main batteryswitch


List PriceSuggested

USD ($)




