John D’Ambrosia, Dell 18 March 2013. A form of activity within IEEE 802 to develop output other...
-
Upload
berniece-harvey -
Category
Documents
-
view
214 -
download
0
Transcript of John D’Ambrosia, Dell 18 March 2013. A form of activity within IEEE 802 to develop output other...
Introduction:Industry Connections in IEEE 802
John D’Ambrosia, Dell
18 March 2013
A form of activity within IEEE 802 to develop output other than standards – ◦ individual-based process◦ Provides all normal protection to participants
Use of ICCOM is appropriate for the following◦ Report or white paper◦ Pre-Study Group Activity (i.e. roadmapping, etc)◦ Presentations
It is not appropriate to replace normal study group function.
Broad & Flexible◦ You define the scope◦ You define the output
Industry Connections Within IEEE 802
IEEE IC / 802 Structure
IEEE-SAStandards Board
IEEE-SAStandards Board
IEEE 802Sponsor Group
IEEE 802Sponsor Group
IEEE 802.xWorking GroupIEEE 802.x
Working Group
IC Activity
IC Activity
Standards Process
Approval Process
Activity
IC Process
IEEE-SAStandards Association
ICComIndustry
ConnectionsCommittee
ICComIndustry
ConnectionsCommittee
Initiating an Industry Connections Effort ICCOM Seeks Endorsement from Sponsor of
Industry Connections Activity Initialization Document (ICAID) for proposed Industry Connections Activity.◦ See References for URL
The ICAID is required and subject to EC Review Approval procedures to follow study group
policies in Exec Committee Operations Manual, except chartered for the requested duration of the ICAID.◦ Rules / Processes to be formalized.
Overview
Idea
Call forSupport
802.XForm
IC
802EC Form
IC
YesICCOM
Approve
SASBApprove
ApprovedIC
Yes
YesNo
CheckPoint
CheckPoint
RIP
No
No
NoCheckPoint
Yes
Note: At "Check Point", either the activity is ended, or there may be various options that would allow reconsideration of the approval.
IEEE 802.3 IC Bandwidth Assessment Ad hoc◦ Output: IEEE 802.3 BWA Assessment Report◦ http://www.ieee802.org/3/ad_hoc/bwa/BWA_Report.pdf
IEEE 802.3 Higher Speed Ethernet Consensus Ad hoc
◦ Output: Meeting Records: http://www.ieee802.org/3/ad_hoc/hse/index.html
◦ Results: March 2013 400 GbE Call-for-Interest, http://www.ieee802.org/3/cfi/request_0313_1.html
Successful Industry Connections
IEEE branding of effort Flexibility to define the effort Indemnification Publicity Transparency Archive of Effort
Personal Observations: Benefits
Background and PurposeDuring the IEEE P802.3ba 40Gb/s and 100Gb/s Ethernet project, it was observed that core networking and computing applications were growing at different rates, driving the need to develop the two new wireline Ethernet speeds. The focus of this IC activity will be to perform an appraisal of future “Ethernet Wireline Bandwidth Needs” of applications within the Ethernet eco-system.
Related Standard – IEEE Std 802.3-2008 and IEEE Std 802.3ba-2010
Related Sponsor – IEEE 802
Charter and ScopeThe scope of this IC will focus on gathering information that will enable an evaluation of the bandwidth needs for Ethernet wireline applications, including, but not limited to, core networking and computing. This evaluation will then enable the generation of a white paper(s) and related presentations on the future bandwidth needs of Ethernet wireline applications, which can then be used for future reference by an appropriate related standards activity.
Proposed DeliverablesThis evaluation will then enable the generation of a white paper(s) and related presentations on the future bandwidth needs of Ethernet wireline applications, which can then be used for future reference by an appropriate related standards activity.
Example ICAID Key Points: “Ethernet Bandwidth Assessment” Program Submission
8
HSE ICAID: https://mentor.ieee.org/802-ec/dcn/12/ec-12-0033-01-00EC-higher-speed-ethernet-icaid.pdf
Background and PurposeThe completion of the IEEE 802.3 Industry Connections Ethernet Bandwidth Assessment Ad hoc has demonstrated that the bandwidth requirements of multiple application spaces are continuing an exponential climb with the forecasted growth in 2020 to reach a level 100x the bandwidth required in 2010. The purpose of the IEEE 802.3 Industry Connection’s Higher Speed Ethernet Consensus activity will be to build consensus related to initiating a new effort targeting the next speed of Ethernet for wireline applications, which will be used for the evaluation and possible development of a Call-For-Interest for the next IEEE 802.3 Higher Speed Study Group.
Related Standard – IEEE Std 802.3-2008 and IEEE Std 802.3ba-2010
Related Sponsor – IEEE 802
Charter and Scope◦ The scope of this IC activity will focus on building consensus related to the next speed of Ethernet for
wireline applications, which will be used for the evaluation and possible development of an IEEE 802.3 Call-For-Interest for the next Higher Speed Study Group. The requested duration for this Industry Connections activity is 12 months.
Proposed Deliverables◦ The proposed deliverables will be the historical records, i.e. meeting notes & presentations, of the
meetings held by this Industry Connections activity.
Example ICAID Key Points: “Higher Speed Ethernet Consensus” Program Submission
Contact: James Wendorf, Ph.D.IEEE-SA Director of Industry
Connections
Industry Connections: standards.ieee.org/industryconnections
Industry Connections Committee: http://standards.ieee.org/about/sasb/iccom/index.html
ICAID: http://standards.ieee.org/develop/indconn/icaid_form.doc
Reference