Corporate Office: 11th & 12th Floor, Hansalaya Building15, Barakhamba Road, New Delhi 110001

Phone: 011 2346 5100 | Toll-free Helpline: 1800 200 1889www.dalmiainnobuild.com

L I F E L O N GBONDS STRONGExt ra Smooth F in ish • H igh Durab i l i t y • Natura l Co lour Tone

Founded in 1935 by Shri. Jaidayal Dalmia and headquartered in New Delhi, Dalmia Group today straddles the cement, power, sugar and

refractory sectors. The cement division was established in 1939 and is built on the legacy of expertise and excellence. With a culture

of innovation and entrepreneurship, Dalmia Cement has been the frontrunner in cement manufacture and supply, strengthening the nation

for over 75 years. With an ever-expanding pan-India footprint, the Company is a category leader in super-speciality cements, used in

high-impact demanding applications like oil wells, railway sleepers and airstrips.

Scan to know more

IS AVAILABLE IN 2 NATURAL SHADESThe versatility of the product allows the usage of

DalmiaMagic even up to 10 mm thickness if needed, by

applying it in multiple layers of 2 mm thickness each.

DalmiaMagic is a proprietary cementitious surface finish solution.

The unique polymer modification makes it suitable for thicker

applications and for all surfaces - even, uneven, interiors, exteriors,

concrete ceilings, plastered surfaces and brick or AAC uneven

surfaces. Versatile, strong and durable, it is created for extensive

use that can make uneven and existing surfaces appear new and

luminous.

DalmiaMagic Advantage: External and Internal Application | More Coverage | Extra Smooth Finish | Zero Chalking | Greater Strength | Higher Durability

PRESENTING

DalmiaMagic PREMIUM SKIM COAT

DalmiaMagic PREMIUM SKIM COAT

Always apply DalmiaMagic over properly wet substrate

For 1 kg of DalmiaMagic, 400-450 ml of water is required

Use mechanical mixer for better consistency and results

Water should be added incrementally. Take 200 ml water and add 1 kg of DalmiaMagic, mix it and then add the balance quantity of water.

Keep mixing it till a consistent paste is achieved

Before application of DalmiaMagic, the substrate must be thoroughly cured

Property Unit DalmiaMagic Standard Test Methods Specifications

Compressive Strength N/mm2 8.4 > = 6 at 28 days aging

Setting Time Initial Minutes 245 < 360

Setting Time Final Minutes 315 < 500

Tensile Adhesion N/mm2 0.9 0.8

Water Retentivity % 99.9 > 95

GUIDELINES FORMIXING AND APPLYING

DalmiaMagic PREMIUM SKIM COAT

PROPERTIES & SPECIFICATIONS*

HOW DOESDalmiaMagic PREMIUM SKIM COAT

GIVE YOU THE EDGE?DalmiaMagic is a unique skim coat due to its natural tone finish, suitable for thicker applications

and all surfaces. It is available in 2 different natural colour tones.

Emulates light-pink granite or sandstone in colour

Suitable for all surfaces including concrete ceilings, plastered surface,brick or AAC uneven surface etc.

Water-resistant

Contains anti-fungal chemicals to resist growth of algae and fungus

Reduces usage of paint on surface

Provides high and unique coverage

Value for money

Light Pink Tone Sandstone Tone

*Tested at HDB accredited 3rd party lab, Singapore#The colour tones shown above are for reference purpose only, actual colour tones may vary.

Values conform to the requirement of BS EN 998-1:2003

A Dalmia Cement Innovation

Disclaimer: In external applications, if paint is not applied on Dalmia Magic used for surface finish, then a roller applied water based acrylic clear coat is recommended for best surface protection.