Danpatherm K12 Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs.

Danpatherm K7 Danpatherm K7 is a unique pre-assembled building system offering excellent light transmission and thermal insulation. Composed of two skins of Danpalon® separated by an air gap, Danpatherm K7 achieves high thermal performances with U-values as low as 0.39W/m2K whilst providing an excellent aesthetic. Each Danpatherm K7 module is cut to size and assembled in the factory to match the individual building requirements and constraints. The system may also be delivered to site in sequential order of installation reducing site cutting, waste and greatly increasing the efficiency of the installation process. Depending on the level of thermal insulation required, an additional translucent insulation fiber may be incorporated for increased thermal performance. This insulation is inserted inside the module without any additional labor required on site.

Danpatherm K12 Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs.

Market needs

• Energy saving

• High quality glazing products

• Clean appearance

• Fast and easy installation

Danpatherm K12 Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs

Energy saving

• 40% of the worlds energy consumption is used in buildings*.

• Roughly 40% of heat and cold in buildings comes in/out through windows**

* According to the IEA (international energy agency)

** American Solar Energy Society (ASES)

Danpatherm K12 Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs

Energy saving

According to the guidelines given by the DIN 4701 standard, an average annual saving of between 0.9-1.3 liters of oil per m² of glazing area will be obtained by decreasing the U-value by 0.1W/m² K.

Danpatherm K12 Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs

High quality glazing products.

Better control over final outcome.

Unprofessional installer.

Weather interruptions.

Unitized system – require no further additions.

Danpatherm K12 Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs

Clean appearance

• No visible structure from outside or inside.

Danpatherm K12 Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs

Fast and easy installation

• Quick and easy to install

• Reducing labor costs and construction times

Danpatherm K12 Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs

DPT 12mm Honeycomb panel

Aluminum glazing bars

Unitized High Insulation System For Facade

Danpatherm K12 Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs

U value – per customer needs between 1.2 to 0.39

Unitized High Insulation System For Facade

Danpatherm K12 Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs

Thermal break Frame

Purlin’s connection

Unitized High Insulation System For Facade

Danpatherm K12 Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs

Product Description

Air gap + Light Diffuser Air gap + Polycarbonate sheets Air gap only Type of insulation

12+12+LD 12+12+ up to 7 layers of 6 mm PC sheets 12mm+12mm Walls structure

12mm Honeycomb panels, forming double glazing Structure

120 mm Thickness

603 mm Module for installation

Standard up to 8 meters Length

Down to 0.52 Down to 0.39 (7 layers) 1.2 U value

24% 19% 46% Light transmission

300 [KG\m2] Load resistance

Up to 3 meter Span between supports

Danpatherm K12 Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs

Main Advantages

• Exceptional thermal insulation

• U value can be adjusted to project’s needs • Factory Prefabricated unit

• Quick and easy to install

Danpatherm K12

Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs

Main Advantages

• Soft, diffused light

• Excellent spanning capabilities and load resistance

• No visible aluminium except frame

• Superior protection against water and air infiltration

Danpatherm K12 Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs

Specification Points

• Excellent U value

• Large Distance between supports

• Unitized glazing system

• Absolute Water and Air infiltration proof

Danpatherm K12 Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs

Danpatherm K12 Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs

Inspiration

Inspiration

Danpatherm K12 Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs

Inspiration

Danpatherm K12 Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs

Inspiration

Danpatherm K12 Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs

Inspiration

Danpatherm K12 Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs

Inspiration

Danpatherm K12 Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs

Inspiration

Danpatherm K12 Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs

Inspiration

Danpatherm K12 Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs

Danpatherm K12 Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs

Inspiration

Danpatherm K12 Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs

Inspiration

Inspiration

Danpatherm K12 Unitized System

Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs

j n christofides lighting limited 3, elenis palaiologis street, 1016 – nicosia, cyprus

t. +357 22813043 www.jnc.com.cy