Rail Signal Engineering Services

JMDR: Team of 110 Permanent Staff

www.jmdr.com; mail@jmdrailtech.com

+61 412 521 362 / +61 2 9299 5637 / +44 77 22 55 90 56 / + 44 7913 341 862 / +91 97 17 90 4343 / +91 22 3267 8477

2The Company

JMD Railtech is an experienced Rail Engineering company and an Authorised Engineering

Organisation (AEO) providing signalling services across a broad engineering spectrum.

We employ a wide range of experienced, competent and licensed engineers, who possess the

required knowledge of standards, procedures and processes of various railways in Australia,

UK, Malaysia, Thailand, Singapore, Indonesia and India.

We provide a total signalling solution in

• Signal Design, Wiring works, Construction & Site works, Testing and Commissioning

• Train Interference Testing

• Signalling & Commissioning Management

• IRSE and ARTC Licensing

• Training and Competency Management

3

ISO 9001:2008, 14001:2004, OHSAS18001:2007 Certified

Where Customer Focus, Team Work, Safety, Value for Money

and People means business….

JMD RailtechSydney Ingleburn Perth York Birmingham

Mumbai Noida New Delhi Bangalore Singapore

Group

4

Global Senior Team5

S. Pandian

Deputy General Manager

(Engineering)

India

D. Goyal

Managing DirectorR. Mifsud

General Manager

(Engineering)

Australia

A. Toffolo

Project Manager

Signals/TIC

V. Sawant

General Manager – India /

Design Manager - UK

(Engineering)D. Martin

Design Manager

Australia

R. Hobby

Training & Competency

Manager

J. Forrest

Project Manager

J. Kircher

Signal Commissioning

Manager

B. McMurtrie

Senior Testing &

Commissioning

Manager

C. Oxborrow

Principles Design

Engineer

Our leadership team has extensive experience in all aspects of rail

signalling engineering. Our broad spectrum of expertise and the ability

and flexibility to deliver the project lifecycle, enables JMDR to be the

provider of choice.

Jonna Paw

Senior Signal

Design Engineer

Mahendran M.

Senior Signal

Design Engineer

6Offices

• York (UK)

• Birmingham (UK)

• Sydney, Australia

• Ingleburn, Australia

• Perth, Australia

• Noida, India

• Mumbai, India

• Bangalore, India

• Singapore

7Locations of WorksOur Capacity to Work and/or Current / Previous Locations:

1. Australia wide (NSW, WA, SA, Queensland, Victoria, Tasmania)

2. UK (York, Derby, Birmingham, London, Swindon, Manchester

and UK wide)

3. India (all over India with current projects in Delhi for Delhi

Metro, Jaipur, Manikpur, Orai, Kota, Jodhpur, Mumbai, Noida,

Allahabad, Jhansi and many other places)

4. South East Asia (Singapore, Thailand, Indonesia, Taiwan and

Malaysia)

5. New Zealand

6. Middle East

8Vision and Values

Our Vision

Rail industry provider of choice for people, signalling services and

competence management

Our Values

Customer Focus, Team Work, Safety, Value for Money and People means

business….

9Preferred Supplier Agreements

Transport for NSW – Sydney Trains

Design Drafting Services

Design Reviews and Verification

Master Service Agreement (MSA) – Construction

Master Service Agreement (MSA) - Engineering

Supply of Subject Matter Experts – Signal Design

Rail Infrastructure Panel of NSW

John Holland / CRN

Authorised Signalling Design Organisation for Country Rail Network CRN

Alstom UK – Framework Agreement for Design Services

Novo Rail - Tier 1 Position for Signalling Resources Panel

ARTC – Standing Offer of Service

NSW – Contingent Workforce Panel

10Framework Agreement / Panel Member

Advantages of Framework Agreement / Panel

Membership

1. Qualified by Audit based on

a) Safety, Quality, Process and Systems

b) Competence and Resource Availability

c) Value for Money and Competitive Pricing

2. Rates negotiated and locked where the rates are based on measurable unit rates. Where the rates

are not locked in for fixed price, simple quotes are required for price with resources, program

and methodology.

3. One Page Work Order to simplify the paper work

4. Volume Discounts where applicable

11Framework Agreement / Panel Member

Examples of Framework Agreement / Panel

Membership

JMDR Panel 1 TfNSW

JMDR Panel 2 Novo

JMDR Panel 3 RailCorp 36

JMDR Panel 4 RailCorp 36 Ext

JMDR Panel 5 MSA Engineering & Construction

JMDR Panel 6 TfNSW SME ETCS

JMDR Panel 7 Alstom

JMDR Panel 8 Variation Alstom

JMDR Panel 9

12Services - Concept to Completion

Signal DesignWiring, Racks

and Location Cases

Signalling Site

Construction

Signalling Testing

& Commissioning

Signalling

Management

Licensing,

Training and

Competency

Management

Supply of

Critical

Resources

13Services

Line

No.Signalling Service UK Australia India South East Asia

1 Design Grip 4 to 8

2 Design (Concept to Detailed, Relay to CBI)

3 Records Updating and CAD work

4 IRSE Licensing and Assessments (total solution)

5 Cable Route

6 Cable Installation

7 Location Cases and Wiring Racks

8 Termination of Cables

9Installation of Signalling Equipment and

Construction Works

10 Panel Works

11 Signal Support Perway

12 Testing

13 Signalling Work Packages and Test Plans

14 Principles Testing

15 Commissioning / Commissioning Support

16 Provide Signalling Resources

14Signalling Design

Concept Design to Detailed Design; Relay to CBI Interlocking

• Design Correlation, Detailed Site Surveys and Signal Sighting

• Concept Layouts, Functional and Operational Specifications, Signal Plan

• Track Insulation Plan (Bonding Plan), Cable Plan

• Control Tables, Circuits and Data

• Design Integrity Test Plan

• Weekly / Safe Notices and Drivers Diagrams

• We also provide the services of Design Reviews and Independent Verifications

Services

15Signalling Design (UK)

GRIP 4

Scheme Plans, Specifications, Risk Assessments, SAT, DA, SORA and Correlation.

GRIP 5

Location/REB Design, Stage works, Fringe works, Control Tables, Bonding, RRI,

Geographical, SSI Data, Microlok Data, TFM Schematics, Data Link Schematics,

Cable Schematics, Cable Core Plans, Level Crossings, Panels, CAD, Records.

Services

16Testing and Commissioning

• Correlation

• Factory Acceptance Testing (FAT)

• Insulation testing

• Train Interference Testing

• Verification Testing (Bell, Wire & Null Count)

• Function Testing and SAT (Site Acceptance Testing)

• Principle Testing

• Commissioning Support

Signalling Management

• Design Management

• Testing Management

• Commissioning Management

• Project Management

Services

17Competence Management

• In-depth knowledge of the Competency Management System’s operating in the

Rail Industry within UK and Overseas

• IRSE Approved Assessing Agency

• Audits

Wiring/Signal Construction

• On site and Off site wiring and installation

• Factory Acceptance Testing

Services

18Supply of Specialist Resources

• Design Engineers/Management

• Commissioning Engineers/Management

• TIC/Functional / Verification Testers

• Principles Testers

• Construction Staff

• Project Engineers

• Project Planners

• Signal Electricians

Services

19Accreditations

• ISO 9001 Certified - Quality Management System

• ISO 14001 Certified - Environmental Management System

• OHSAS 18001 Certified - Occupational Health & Safety

Management System

• Link Up - UK Qualified Supplier

• AEO - Authorised Engineering Organisation – ASA TfNSW

• IRSE - Approved Licensing Scheme Agency

20Recent Projects (UK)

• Cross Rail Anglia - Relock

• Cross Rail Anglia - Ilford & Gidea park Remodelling

• East Nottingham Modular Re-signalling (ENMR)

• Records Updating - Arun Valley Resignalling project, Pool to Woole

• Cross Rail Anglia - Cross Rail West- Stage K (Inner & Outer) & Stage-M

• Westbury - 650V Power cable renewal, GRIP 5 - Design and Verification of Location Case

Design, Design Specification, Location Survey Report.

21Recent Projects (UK)

• London Overground Capacity Improvement Project, GRIP 5 – Relocatable Equipment

Building (REB) Design, Control Table amendment.

• East London Line - Platform Extension, GRIP 3 – Option selection, Feasibility Study

• Nottingham-NewarK Castle & Grantham Re-Signalling, Stagework, (ENMR) GRIP 5 - Scheme

Plan, Bonding Plan, Signalling Design Specification, Location Design, Correlation Update, Red

& Green work, Fringe Locations, Control Table updates.

• Other projects such as Doncaster GRIP 7, Pool to Wool GRIP 7 & 8, Finsbury Park to Alexandra

Palace GRIP 8, East Nottingham to Newark Modular Signalling GRIP 5

• IRSE Licensing

22Recent Projects (Australia)

• TfNSW – Novo Rail - Parramatta Turnback – Testing & Commissioning including Design Integrity

Principles Testing.

• TfNSW – Novo Rail - Westmead to Granville Resignalling Project - Testing & Commissioning.

• TfNSW – RCR – Aurecon - ATP and Advance Management System – TfNSW – Concept Designs and

Detailed Designs of nominated areas

• ARTC Singleton – Converting Relay Interlocking to Microlok Design and Principles Testing

• Substations – Associated Signal Design for upgrade of Sub-Stations

23Recent Projects (Australia)

• Glenfield Junction (South West Rail Link Stage 1) - Another major junction upgrade and multi-

discipline project – Design Independent Verification, Design Integrity Test Plan, Testing including

Principles Testing and overall Commissioning Management. Successfully commissioned on 10th June

2014.

• Auburn Junction (LGCUP Stages 9, 10 and 11) – A major junction upgrade and multi-discipline project

– Testing & Commissioning, Design Reviews and Independent Verification. Successfully commissioned in

between Dec 13 to Jan 15.

• Drayton Junction – Concept to Detailed Design (Signalling Functional Specification, Signal Plan, Control

tables, Power Calculations, Bonding Plan, Circuits, Data, BOM, Design Reports) and MISS Testing

• Updating of Certified Commissioning Copies of Sydney Trains (Hornsby, Hurstville and Port Kembla) and

Network Rail, UK

• Newcastle Truncation Project Commissioning (26 Dec’ 14 to 4 Jan’ 15).

24

Recent Projects (India and South East Asia)

• Assistance with Principles Testing in Malaysia and TPWS Works in India

• Assistance with Principles Testing in Singapore for Thales

• IRSE Licencing (35) for Taiwan High Speed Rail Corporation

• IRSE Licencing (12) for Bombardier in Thailand

• Independent Design Verification – Control Tables – Delhi Metro Rail Corporation for Line 7, Line 8 and

Kochi Metro. The integration of Interlockings utilises two interlocking systems working simultaneously,

namely Communication Based Train Control (CBTC) Interlocking and Solid State Interlocking (SSI). The

SSI system would come into effect when non-CBTC trains are running.

• JMDR India has been now also approved as sub-contractor by DMRC for Installation works for Line 7 of

Delhi Metro through Bombardier.

25

Recent Projects (India and South East Asia)

Completion of Axle Counter Projects in India for Siemens India - Supply, Installation, Testing and

Commissioning of Multi Section Digital Axle Counters (MSDAC) with installation works of more than 111

Detection Points completed for Pali, Makrana, Durgapura and Gandinagar. A letter of appreciation was

received from client for completion of quality works in timely manner to client satisfaction.

Route Relay Interlocking (RRI) Project at Kota – Alterations to Route Relay Interlocking to convert Goods

Line No. 4 to Passenger Common Loop at Dadhdevi of Kota division – The works included installation, wiring

and pre-testing of 18 Relay Racks and 3 Cable Termination Racks. The project has been successfully

commissioned now.

Construction Works in progress for manufacturing facility of wire factory at Greater Noida

26Our Clients

27Operating Markets

Group

28

Key MembersDilip Goyal Managing Director

Signal Engineer, M.Engg – Electrical, FIRSE, RPEQ, MIEAust, CPEng

More than 31 years of experience in the rail and engineering industry having worked as a Graduate Engineer, Project Engineer,

Test Engineer, Signals Construction Manager, Commissioning Manager and Program Manager of Railways Signalling in NSW

delivering large number of signalling projects from concept to handover. He is now the Managing Director of the JMDR Group.

Richard Mifsud General Manager – AUS (Engineering)

Signal Engineer, BEng - Electrical

Senior Manager with multi-discipline management experience in railways across signals, communications, electrical and civil.

Richard is managing all aspects of signal engineering at JMDR across Australia and has managed the process of AEO

accreditation. He has more than 26 years of experience in railway signalling and brings significant experience in the areas of

Signalling Management including Design, Construction, Testing & Commissioning Management, Asset Management, Maintenance,

Interface Management and Staff Management. He values competency and customer relations and nurtures staff to ensure we

deliver works with our core values.

Vilas Sawant General Manager IND (Engineering) / Design Manager - UK

IRSE 1.1.150D; IRSE 1.1.160

More than 25 years of experience. Responsible for design coordination, design and independent design check, resource planning

& project management of Indian, UK, US & Australian Railways. Experience covers the preparation of Signalling Plan and Design

& Independent Checking of Railway Signalling designs, which includes Signalling Scheme Plans, Signalling Plans, Bonding Plans,

Location Area Plans, SSI/RRI Control Tables, Locking tables, Route Section Plans, Aspect control Charts, Outline Project

Specification, Design Specification, Circuit diagrams and Cable Plans, Power loading calculations, level crossing gate control

circuits, SSI I/O circuits, Microlok I/O circuits, automatic signalling.

29

Darren Martin Design Manager (AUS)

Signal Electrician

Darren has over 32 years of experience in the field of Signalling Design in the NSW rail industry. He is currently working for

Sydney Trains Control Systems on behalf of JMDR as a Signalling Subject Matter Expert, converting control tables to ATRICS

simulation data. Prior to joining JMDR he was employed by Sydney Trains in the role of Technical Specialist, working as

Verifier and SME on the K2RQ (where he verified the Control Tables on behalf of Sydney Trains), Ashfield ATRICS and Sydney

Box TD Replacement projects amongst many others. During his career he has worked on almost all major NSW projects.

Key MembersBruce McMurtrie Senior Testing & Commissioning Manager

Signal Engineer

Bruce has over 40 years of rail signalling and communications experience having worked in numerous roles with excellent

project management, interface management, construction and testing & commissioning experience. Recently Bruce has

managed the commissioning’s of a very complex multi-discipline project (LGCUP) of more than $400M. He is also a Workplace

Assessor and has previously managed projects such as Homebush Bay Rail Link and numerous Re-signalling projects.

Adam Toffolo Project Manager Signals/TIC

Signal Engineer, BEng - Electronic

Adam has over 12 years’ experience in Australia and UK. He commissioned Stage 11 Auburn Junction Project (Multi-discipline

complex Re-signalling Project >$400M) as a TIC. He has worked on other high profile complex projects such as Epping to

Chatswood Rail Link, North Shore Headways and Homebush Turn back. Previously, he had managed and delivered a portfolio

of MPM projects for the City/Inner West Region of Sydney Trains.

30

Jarrad Kircher Signal Commissioning Manager

Overall 14 years’ of experience in testing, commissioning, maintenance and project management of signalling projects in the

railway industry in Australia. Jarrad has worked in a range of positions including Signalling Testing Manager, AEO Package Lead,

Commissioning Manager, Senior Project Engineer, Project Manager, and Tester In Charge.

Colin Oxborrow Principles Signal Design Engineer

BEng - Electrical

With over 26 years in the Railway Signalling Industry, Colin’s wealth of experience extends to the Design, Review and

Independent Verification of all aspects of Signalling Design. He has recently undertaken design reviews for the GLRL and

Auburn Stage 10 (LGCUP) projects (including the production of Control Tables in XML format using the latest version of

EGG 1648). In addition to his experience at Auburn Junction, Colin undertook the XML Control Tables Difference Listing

works, developing a procedure to enable changes to be tracked on XML Control Tables. Colin previously worked for

RailCorp as a Design Verifier.

31Key Members

Jen Forrest Project Manager

BA(Hons) – International Business Studies

Highly proficient and versatile Project Manager with a demonstrable track record of accomplishment in various sectors,

delivering multiple projects across the public and private sector. Detailed knowledge of full project implementation cycle

including setting scope and governance, planning, resource management, progress, budgetary controls and mitigating risks

driving successful implementation within timescales. Operationally astute with exemplary communication skills; engaging

with key stakeholders and influencing decision makers.

Richard Hobby Training & Competency Manager

BA (Hons)Richard Hobby is the Training & Competency Manager. He responsible for ensuring that all necessary JMDR Engineering Staff

achieve and maintain the relevant competencies for the role that they perform. Prior to joining JMDR he was responsible for

the management of the internationally accredited IRSE Licensing Scheme at IRSE UK. He managed the competence of all

persons engaged in the safety critical railway signalling & telecommunications work. He has wealth of experience within

Competency Management to provide confidence and support to both clients and employees in the Competence Management

System JMD Railtech operate.

Jonna Paw Senior Signal Design Engineer

BEng - Electrical

Overall 18 years experience in the Railway Industry, focusing on the design, review of relay and processor based Interlocking

Circuits / Data, Signalling Arrangement, and Train Control System. Jonna has designed Signalling Plans, Control Tables,

Circuits, Bonding Plan, Cable Plan, Power Distribution, Control Distribution and Signalling Functional Specifications. Her

experience also includes managing and commissioning of signalling systems of numerous signalling projects and ATC on-board

systems.

Singadurai Pandian Deputy General Manager (Engineering)

BE (Electronics & Communication Engineering)

Overall 25 years of experience in the field of Railway Signalling which includes Testing and Commissioning of Various

installations on Indian Railways (Western zone, Mumbai Division). He has vast knowledge of Electro-mechanical, RRI, Microlok

II Location Cases, SSI Location Cases, Free wired location cases, REB for LX with MCB-OD and Axle counters

32IRSE Licensing

“In September 2014, JMDR became an IRSE Approved Assessing Agency and were

authorised to undertake both Workplace and Competence Assessment on behalf

of the internationally accredited and globally recognised IRSE Licensing Scheme.

With first-hand knowledge of the IRSE Scheme, JMDR promise to provide you an

assessment service that is professional, efficient and timely.”

Richard Hobby is our Assessing Agency Manager.

33Overseas Support

• 20 IRSE Licensed Designers and 30 other Design Engineers based in India

ranging from Designer to Design Manager with total staff of 65 permanent

staff plus contractors

• Competitive Pricing

• Additional Designers based in Australia and UK.

• A number of highly skilled engineers with Australian and UK practices with

good planning round the clock working improving delivery timescales

• Training in Australian and UK practices and standards

• Local interface with Clients

34Training

• Overseas staff all undergo specific training before deployment.

• Signalling Design training for staff ongoing, CAD, BST, IST, AST, Location,

Bonding etc.

• Weekly training for staff on design best practices.

• Ongoing training for Installation, Testing and Commissioning Staff

• Trainee scheme in place for Interns, Graduates and Apprentices.

• Clients requirements will be accommodated.

• Upcoming Training facility in Noida.

35Business Growth

Year 1

Offices in Sydney and Mumbai with staff of 5 (May 2008)

Year 8

Offices in Sydney, Ingleburn, York, Birmingham, Mumbai, Noida, Delhi, Bangalore

and Singapore; and more than 110 permanent staff globally working in Australia

(30 of which 5 in Perth), UK (21), India (59), and many sub-contractors. New

company registered in Singapore now.

Working in Australia, UK, India and South East Asia (Malaysia, Thailand, Singapore

and Taiwan)

30Past Achievements/Projects Photos

JMDR AEO Group

37Achievements/Projects Photos

LGCUP Projects final Commissioning

38Achievements/Projects Photos

GTI (Glenfield Transport Interchange)

39Achievements/Projects Photos

Sydney Light Rail Wiring Works

40Achievements/Projects Photos

Site Works

41York Office

42Birmingham Office

43Sydney Office

44Mumbai Office

45Noida (New Delhi) Office

46Bangalore Office

47IRSE Meeting at JMDR York

48

JMDR’s Cultural Festival

49

Thank YouOur values: Customer Focus, Team Work, Safety, Value for Money and People