JIANGYIN SPARK ELECTRONIC TECHNOLOGY CO.,LTD Split Core ... · The JIANGYIN SPARK series of split...

13
JIANGYIN SPARK ELECTRONIC TECHNOLOGY CO.,LTD Website: www.xh-dianzi.com Email: [email protected] Split Core (Clip on) Current Sensor The JIANGYIN SPARK series of split core current sensors are designed for fast and easy installation. Split-core transformers are ideal for installation on existing electrical wiring by snapping around the conductor. This method permits a safer, easy and portable current measurement. Features: Small size, low cost High secondary turns Secure locking hinge How to using: Specifications: Maximum continuous primary current 1A to 600AAc Current Ratio: 500:1 ,1000:1 ,2000:1 ,2500:1 ,3000: 1 Output: mA or 0.333Vac to 3.53Vac Accuracy: ± 1% from 5% to 120% of rated current Insulation Voltage: 600Vac Maximum Primary Voltage: 5000Vac(Insulated Conductor) Phase angle: Less than 2 degrees at 50% of rated current Frequency Range: 50 Hz to 400 Hz Operating Temperature: -15C to 60C. Leads: 4Foot(105cm), UL 1015, Twisted Pair, 24AWG CE ,UL recognized, and RoHS compliant Output and leads can be customized

Transcript of JIANGYIN SPARK ELECTRONIC TECHNOLOGY CO.,LTD Split Core ... · The JIANGYIN SPARK series of split...

JIANGYIN SPARK ELECTRONIC TECHNOLOGY CO.,LTD

Website: www.xh-dianzi.com Email: [email protected]

Split Core (Clip on) Current Sensor

The JIANGYIN SPARK series of split core current sensors are designed for fast and easy installation. Split-core transformers are ideal for

installation on existing electrical wiring by snapping around the conductor. This method permits a safer, easy and portable current measurement.

Features:

Small size, low cost

High secondary turns

Secure locking hinge

How to using:

Specifications:

Maximum continuous primary current 1A to 600AAc

Current Ratio: 500:1 ,1000:1 ,2000:1 ,2500:1 ,3000: 1

Output: mA or 0.333Vac to 3.53Vac

Accuracy: ± 1% from 5% to 120% of rated current

Insulation Voltage: 600Vac

Maximum Primary Voltage: 5000Vac(Insulated Conductor)

Phase angle: Less than 2 degrees at 50% of rated current

Frequency Range: 50 Hz to 400 Hz

Operating Temperature: -15C to 60C.

Leads: 4Foot(105cm), UL 1015, Twisted Pair, 24AWG

CE ,UL recognized, and RoHS compliant

Output and leads can be customized

JIANGYIN SPARK ELECTRONIC TECHNOLOGY CO.,LTD

Website: www.xh-dianzi.com Email: [email protected]

Applications:

Sub-Metering Accurate Measurement

Data Loggers to analyze Building & Machinery Performance

Digital Fault Recorders

Smart Grid Application Features ,Load Center

Three Phase Balance Control

In-Factory Display ,In-Home Display

Inverters for Solar & Wind Turbine Systems

Power Measurement Device For PLC

Model I.D. Ratio Rated Amps Accuracy

XH-SCT-T10 10mm 3000:1 0-80A 0.5, 1.0

XH-SCT-T16 16mm 3000:1 0-120A 0.5, 1.0

XH-SCT-T24 24mm 3000:1 0-300A 0.5, 1.0

XH-SCT-T36 36mm 3000:1 0-600A 0.5, 1.0

XH-SCT-T70 70mm 200:1 0-1000A 0.5

Special T10 10mm 3000:1 0-5A Within 0.5

About the Special T10, our testing accuracy is 0.26%, and we think it’s accuracy will within 0.5% when it volume production

JIANGYIN SPARK ELECTRONIC TECHNOLOGY CO.,LTD

Website: www.xh-dianzi.com Email: [email protected]

CE UL ETL certificates.

Why choice split core current transformer from Jiangyin spark?

CE UL ETL, have good reputation in the market.

Our 60A/0.333V split core ct’s accuracy can catch 0.3%, and it’s price only USD 2.00/piece.

We still have very low current split core ct, 5A/0.333V, accuracy can reach within 0.5%.

Since 1995, have rich experience, 4-20mA/0.333V/0-10V/0-5V output we all have.

JIANGYIN SPARK ELECTRONIC TECHNOLOGY CO.,LTD

Website: www.xh-dianzi.com Email: [email protected]

Detail product specification for Split Core (Clip on) Current Sensor

XH-SCT-T10 Split Core Current Transformer

SPECIFICATIONS :

1、Rated Voltage:0.66KV

2、Insulation Voltage:2KV

3、Rated Frequency:50HZ或 60HZ

4、Operating Temperature:-15℃to 60℃

5、Flame resistance:UL94-V0

6、Certificates:CE、UL

FEATURES:

1、Small cost

2、Split core design ,Easier installation

3 Build diode ,no high voltage danager

4、Good linearity at very low current

DIMENSIONS( mm ):

A type B type

PARAMETERS

Model Input(A) Max currnet(A) Output

XH-SCT-T10A

0.2-80AAC 100AAC 0-30mArms/0.333VAC

/0-3 VAC XH-SCT-T10 A

CURVE PERFORMANCE

-3

-2

-1

0

1

2

3

4

5

3 5 10 20 30 50 60 80 90 100

F(I…

Input (A)

SCT0010-3000T(Rb:10Ω)

curve

0.02

0.04

0.08

0.16

0.32

50 500

Ou

tpu

t (m

A)

Input(mA)

SCT0010-3000T低端电流…

0.4

4

40

400

4000

40000

0.1 1 10 100 1000

Ou

tpu

t(m

V)

Input(A)

10 Ohm

SCT0010-3000T curve

JIANGYIN SPARK ELECTRONIC TECHNOLOGY CO.,LTD

Website: www.xh-dianzi.com Email: [email protected]

XH-SCT-T16 Split Core Current Transformer

DIMENSIONS( mm ):

DIMENSIONS( mm ):

Model Input(A) Max currnet(A) Output

XH-SCT-T16

0.2-100AAC 120AAC 0-30mArms/0.333VAC

/0-3 VAC XH-SCT-T10 A

CURVE PERFORMANCE

-1

0

1

2

3

1 4 16 64 256

F(I…

SCT0016-100A/33.3mA(Rb:10Ω)

Input(A)0.02

0.04

0.08

0.16

0.32

80 640

Ou

tpu

t (m

A)

Input(mA)

SCT0016-3000T低端…

2

20

200

2000

20000

1 5 25 125

Ou

tpu

t(m

V)

Input(A)

10ohm100ohm

SCT0016-3000T伏安线性图

SPECIFICATIONS :

1、Rated Voltage:0.66KV

2、Insulation Voltage:2KV

3、Rated Frequency:50HZ或 60HZ

4、Operating Temperature:-15℃to 60℃

5、Flame resistance:UL94-V0

6、Certificates:CE

FEATURES:

1、Small cost

2、Split core design ,Easier installation

3 Build diode ,no high voltage danager

JIANGYIN SPARK ELECTRONIC TECHNOLOGY CO.,LTD

Website: www.xh-dianzi.com Email: [email protected]

XH-SCT-T24 Split Core Current Transformer

SPECIFICATIONS :

1、Rated Voltage:0.66KV

2、Insulation Voltage:2KV

3、Rated Frequency:50HZ or 60HZ

4、Operating Temperature:-15℃ to 60℃

5、Flame resistance:CE, UL94-V0

6、Certificates:

FEATURES:

1、Small cost

2、Split core design ,Easier installation

3、Build diode ,no high voltage danager

4、Good linearity at very low current

DIMENSIONS( mm ):

四、DIMENSIONS( mm ):

Model Input(A) Max currnet(A) Turns(T) Burden(Ω) Output

SCT0024-200/66.6mA 10A-200A 200 3000 100 mA/0.333VAC/0-5 VAC

五、CURVE PERFORMANCE:

-5

-4

-3

-2

-1

0

1

2

3

8 32 128 512

input(A)

T24-3000T(Rb:100ohm)at different matrials

F(I)%-Ferrites(PC40)

δ(I)°-Ferrites(PC40)-5

-4

-3

-2

-1

0

1

2

8 16 32 64 128 256 512input(A)

T24-3000T(Rb:0ohm)

at different materials

F(I)%-Ferrites(PC40)

δ(I)°-Ferrites(PC40)

F(I)%-Silicon steel(0.27mm)

δ(I)°-Silicon steel(0.27mm)

0

0.1

0.2

0.3

0.4

0.5

0 20 40 60 80 100 120 140 160 180 200 220 240 260

ou

tpu

tvo

latg

e

(V)

input(A)

SCT0024-200A/0.333V

JIANGYIN SPARK ELECTRONIC TECHNOLOGY CO.,LTD

Website: www.xh-dianzi.com Email: [email protected]

XH-SCT-T24 5A output split core CTs

SPECIFICATIONS:

1、Standard :GB1208 and IEC60044-1

2、Rated Voltage:0.66KV;

3、Insulation Voltage:2KV;

4、Rated Frequency:50H or 60HZ;

5、Operating Temperature:-15℃to 45℃。

6 、Certificates:CE

FEATURES::

1、Small cost

2、Split core design ,Easier installation

3、 1A or 5A at secondary output

DIMENSIONS( mm ):

PARAMETERS:

1、Output:5A

Model Input(A) Output(A) Overload

current(A)

Accuracy(5%-120%)

F(I)% δ(I)°

SCT0024-100A/5A 100 5 160 ≤1.5% ≤1.5°

SCT0024-150A/5A 150 5 240 ≤1% ≤1°

SCT0024-200A/5A 200 5 320 ≤1% ≤0.5°

SCT0024-250A/5A 250 5 420 ≤1% ≤0.5°

2、Output:1A

Model Input(A) Output(A) Overload

current(A)

Accuracy(5%-120%)

F(I)% δ(I)°

SCT0024-100A/1A 100 1 300 ≤1.5% ≤0.5°

SCT0024-200A/1A 200 1 600 ≤1% ≤0.5°

SCT0024-300A/1A 300 1 800 ≤0.5% ≤0.2°

JIANGYIN SPARK ELECTRONIC TECHNOLOGY CO.,LTD

Website: www.xh-dianzi.com Email: [email protected]

CURVE PERFORMANCE:

-2

-1

0

1

2

0% 50% 100% 150% 200% 250% 300% 350%

Rated input current

XH-SCT-T24 output1A performance(2.5m leads)100A/1A-F(I)%200A/1A-F(I)%300A/1A-F(I)%100A/1A-δ(I)°200A/1A-δ(I)°

-4

-2

0

2

4

6

0% 50% 100% 150% 200%Rated input current

XH-SCT-T24 output 5A performance(1m leads)100A/5A-F(I)%150A/5A-F(I)%200A/5A-F(I)%250A/5A-F(I)%100A/5A-δ(I)°150A/5A-δ(I)°200A/5A-δ(I)°

JIANGYIN SPARK ELECTRONIC TECHNOLOGY CO.,LTD

Website: www.xh-dianzi.com Email: [email protected]

XH-SCT-T36-0.333V split core CTs

SPECIFICATIONS :

1、Rated Voltage:0.66KV

2、Insulation Voltage:2KV

3、Rated Frequency:50HZ or 60HZ

4、Operating Temperature:-15 ℃ to 60℃

5、Flame resistance:UL94-V0

6、Certificates:CE、UL、ETL

FEATURES:

1、Small cost

2、Split core design ,Easier installation

3、Build diode ,no high voltage danager

4、Good linearity at very low current

2、DIMENSIONS( mm ):

DIMENSIONS( mm ):

Model Input(A) Max currnet(A) Turns(T) Burden(Ω) Output

SCT0036-300/100mA 10A-300A 500 3000 100 mA/0.333VAC/0-5 VAC

CURVE PERFORMANCE:

JIANGYIN SPARK ELECTRONIC TECHNOLOGY CO.,LTD

Website: www.xh-dianzi.com Email: [email protected]

XH-SCT-T36 1A or 5A output split core CTs

SPECIFICATIONS:

1、Standard :GB1208 and IEC60044-1

2、Rated Voltage:0.66KV;

3、Insulation Voltage:2KV;

4、Rated Frequency:50H or 60HZ;

5、Operating Temperature:-15℃to 45℃。

6 、Certificates:CE

FEATURES::

1、Small cost

2、Split core design ,Easier installation

3、1A or 5A at secondary output

DIMENSIONS( mm ):

PARAMETERS:

1、Output:5A

Model Input(A) Output(A) Overload

current(A)

Accuracy(5%-120%)

F(I)% δ(I)°

SCT0036-100A/5A 100 5 170 ≤1% ≤1°

SCT0036-250A/5A 250 5 420 ≤0.5% ≤0.7°

SCT0036-300A/5A 300 5 540 ≤0.5% ≤0.2°

SCT0036-400A/5A 400 5 720 ≤0.5% ≤0.2°

SCT0036-600A/5A 600 5 960 ≤0.5% ≤0.1°

2、Output:1A

Model Input(A) Output(A) Overload

current(A)

Accuracy(5%-120%)

F(I)% δ(I)°

SCT0036-200A/1A 200 1 600 ≤0.5% ≤0.3°

SCT0036-300A/1A 300 1 700 ≤0.5% ≤0.2°

SCT0036-500A/1A 500 1 800 ≤0.5% ≤0.1°

JIANGYIN SPARK ELECTRONIC TECHNOLOGY CO.,LTD

Website: www.xh-dianzi.com Email: [email protected]

CURVE PERFORMANCE:

-1

-0.5

0

0.5

1

0% 50% 100% 150% 200% 250% 300%

Rated input current

XH-SCT-T36 output 1A performance(2.5m leads )

200A/1A-F(I)%300A/1A-F(I)%500A/1A-F(I)%

-2

-1

0

1

2

3

4

0% 20% 40% 60% 80% 100% 120% 140% 160% 180% 200%

Rated input current

XH-SCT-T36 output 5A performance(1m leads)

100A/5A-F(I)% 250A/5A-F(I)%300A/5A-F(I)% 400A/5A-F(I)%

JIANGYIN SPARK ELECTRONIC TECHNOLOGY CO.,LTD

Website: www.xh-dianzi.com Email: [email protected]

XH-SCT-T70 Split Core Current Transformer

Specification:

Rated primary current: 100 to 1500A AC

Rated secondary current: 5 or 1A AC

Rated load: 1, 2.5, 5.0, 10 and 30VA

Accuracy: 0.5, 1.0 and 3.0 class

Rated short-time thermal current (Ith): 20In

Rated dynamic current (Idyn): 2.5Ith

Highest voltage for equipment (Um): 720V AC RMS

Rated power-frequency withstand voltage: 3, 000V AC RMS

Frequency range: 50/60Hz

Operating temperature: -15 to 60° C

Split core design, safer, easy to install and portable

Accessories: Supplied with feet for base mounting if required

Applications:

Current, power, energy and monitoring devices

Relay protection devices

Power factor correction devices

Available in 5 standard sizes

Standard: IEC 60044-1

RoHS Directive-compliant

DIMENSIONS( mm ):

70mm hole diameter

SPECIFICATION:

Model Input(A) Max current(A) coil ratio accuracy Output

SCT0070-1500/5A 100A-1000A 1500 200:1 0.5class 1A or 5A

Clamp on Current Transformer 1500A/5A with 70mm hole diameter

1)Clamp-on Current Transformer 70mm hole diameter

2) Current Range 1000A

3)Accuracy class 0.5

4)Secondary current: 5A

5)ABS plastic casing

6)1.0M length black and red wire lead

JIANGYIN SPARK ELECTRONIC TECHNOLOGY CO.,LTD

Website: www.xh-dianzi.com Email: [email protected]

JIANGYIN SPARK ELECTRONIC TECHNOLOGY CO.,LTD

(Sales Manager) Cobain

ADD NO: NO.263,dongwaihuan Road ,JiangYin City,214432,China

FAX: +86-510-86277533

WEBSITE: www.xh-dianzi.com

SKYPE: [email protected]

Email: [email protected]

Face book: Jiangyin Spark