JENSEN Printed in Switzerland Vö.D. 2000, 05.04 ... · JENSEN GROUP JENSEN JENFORM OMEGA PLUS...
Transcript of JENSEN Printed in Switzerland Vö.D. 2000, 05.04 ... · JENSEN GROUP JENSEN JENFORM OMEGA PLUS...
JENSEN GROUP
JENSENJENFORM OMEGA PLUS
Tunnelfi nisher based on the principle
Garment fi nishing automationwith high and constant performance
JENSEN GROUP– the heavy-duty laundry division in LSG, Laundry Systems Group
www.jensen-group.com
– A world of competence
JENSEN the market leader in fi nishing automationMETRICON the world’s most advanced garment sorting and handling systemSENKING the market leader in washing equipmentFUTURAIL the world’s leading bag handling, sorting and production control systemD’HOOGE/L-TRON the washer extractor and dryer product range
The JENSEN GROUP’s world of competence comprises the following JENSEN brand names:
Call us ...JENSEN provides a complete range of heavy-duty equipment for commercial laun-dries, delivered and installed according to your specifi cations. Please do not hesitate to contact us for fur-ther advice and information, or visit www.jensen-group.com
Picture: OMEGA Plus IV
New transport system
POCKETBLOWERS
Directed air nozzles prevent moisture trapping
ADJUSTABLECLIMATE CONTROL
Monitors fresh air, exhaust air, and temperature
Prin
ted
in S
witz
erla
nd V
ö.D.
20
00,
05.
04 ©
Ate
lier J
akob
AG
, CH
-178
3 Ba
rber
êcheApplication
• The new JENFORM series meets all requirements of today’s garment fi nishing automation. Its modular frame construc-tion allows individual machine confi gura-tions, thus covering all customer needs.• Two basic models each in four perform-ance categories as well as many options are available:• JENFORM OMEGA Plus GAS individual gas heating per drying zone• JENFORM OMEGA Plus STEAM individual steam heating per drying zone
Basic construction• As the name of the new JENFORM series suggests, the conveying system is based on the Greek sign. This simple and at the same time ingenious solution considerably increases the processing time during fi nishing.• The drying zone and the air circulation system have been noise insulated. Spe-cial attention has also been given to ther-mal insulation to minimize heat loss.
STEAM VERSION
GAS VERSION
������������
������������
������������
����������
����������
����������
����������
��������������������
����������
�����������
�����������
����������
������������������������� ��������������������������
���������������������������
��������������������������
����������
����������
����������
�����������
����������
����������
�����������
����������
����������
�����������
5
7
4
2
1
3
3
37
6 6
8 8
9 9
1
1
1
2
2
3
3 4
1 2
F
F
F
FE
E
E
E E
B D
A
C
JENFORM OMEGA PLUS
Subject to change. Pictures and layouts are partly optional.
Steam-heated version• One high-performance heating register (8) is integrated in each drying zone.
Gas-heated version• A separately adjustable gas burner (9) is provided for each drying zone. The burner is located in the center of the drying cham-ber and injects the heat into the circulated air through a specially developed distribu-tion tube. The distribution tube points at a high-temperature baffl e plate. Process air fl ows around this baffl e plate, so it functions like a radiator and assures ideal heat distri-bution.
Automatic lint scraper• Each tunnel fi nisher has an integrated au-tomatic lint scraper. Together with the lint, dropped garments are transported to the side access. Automatic detection and alarm of this event may be included on request.
JENFORM OMEGA Plus General OMEGA Plus I OMEGA PLlus II OMEGA Plus III OMEGA Plus IV
Opening for installation 2900 × 1750 mm 2900 × 1750 mm 2900 × 1750 mm 2900 × 1750 mm
Weight 2500 kg 3500 kg 4500 kg 5500 kg
Standard voltage 3 × 400 V + PE 3 × 400 V + PE 3 × 400 V + PE 3 × 400 V + PE
Electrical connection 14 kW / 20 A 26 kW / 40 A 36 kW / 52 A 45 kW / 65 A
Air pressure 6 – 8 bar 6 – 8 bar 6 – 8 bar 6 – 8 bar
Air consumption 90 Liter / h 180 Liter / h 270 Liter / h 360 Liter / h
OMEGA Plus STEAM VERSION
Evaporation capacity 70 Liter / h 140 Liter / h 210 Liter / h 280 Liter / h
Steam pressure 10 – 13 bar 10 – 13 bar 10 – 13 bar 10 – 13 bar
Steam consumption 150 – 250 Kg / h 3000 – 450 Kg / h 450 – 600 Kg / h 600 – 750 Kg / h
OMEGA Plus GAS VERSION
Evaporation capacity 75 Liter / h 150 Liter / h 225 Liter / h 300 Liter / h
Steam pressure 6 – 10 bar 6 – 10 bar 6 – 10 bar 6 – 10 bar
Steam consumption 50 – 120 Kg / h 70 – 210 Kg / h 120 – 320 Kg / h 140 – 430 Kg / h
Gas consumption 6 – 8 m³ / h 11 – 14 m³ / h 16 – 20 m³ / h 22 – 26 m³ / h
1 2 3 4
Drying units
Inlet F E Outlet
STEAM VERSION GAS VERSIONInlet zone
The S-shaped conveying system considerably incre-ases the processing time in the tunnel compared to other systems, whereby the temperature of the garment is slowly
and gently raised.
Outlet zone
The S-shaped convey-ing system increases the processing time greatly compared to other systems on the market, whereby the garment is slowly and care-fully brought to ambient
temperature.
Four-level steamingThe standard JENFORM OMEGA Plus is equipped with a 4-level steaming system.• The S-shaped conveying system creates a wedge-shaped gap between the garments. Steam is carefully directed to the two peak points, resulting in the full exposure of the garments to be steamed.• At the end of the inlet zone the garments are processed with steam from above as well as from the side. The steaming process extends into the drying zone.• The air circulation fans create a steam and hot air stream. All steaming parameters can of course be individually adjusted for each fi nishing program.
A Level 1: steaming peak point 1
B Level 2: steaming peak point 2
C Level 3: steaming from the side
D Level 4: steaming from above
Drying zone• Climate control:In the JENFORM OMEGA Plus, the drying zone has been transformed into a genuine climate zone! The exchange of air is indispensable for superior performance. In other words, saturated air (1) must be evacu-ated and replaced by unsaturated air (2). Accordingly, the JENFORM OMEGA Plus features not only individual tempera-ture control but also separately adjustable in-feed and exhaust air parameters per drying zone (3). Apart from capacity optimization, this also allows balanced control of energy input – and thus energy costs.• Air circulation principle:The orientation of the air circulation fan (4) defl ects the air stream at a right angle. This reduces fl ow losses and of course optimizes the volumetric fl ow as well. Process air reach-es the garments through the standard-confi g-uration JET nozzles (5), and the high-velocity air stream guarantees an ideal stretching and drying effect.
Trockenzone• Most work garments are fi tted with pock-ets. Pocket areas dry less quickly because of the extra fabric layer. To solve this prob-lem, the JENFORM OMEGA Plus is equipped with so-called pocket blowers (6). Unsaturated process air is routed down-ward through double sidewalls and directed through nozzles that point to the pocket ar-eas of the garments.• To achieve perfect fi nishing quality for long garments, the lower section (7) of the processing chamber was narrowed. This automatically increases the air speed to enhance the stretching effect over the entire length of the garment.