JDM-1551/14Overland4x4ARTRRCTruck · 2020. 1. 19. · 2 Scale:1:14...
Transcript of JDM-1551/14Overland4x4ARTRRCTruck · 2020. 1. 19. · 2 Scale:1:14...
-
1
JDM-155 1/14 Overland 4x4ARTR RC Truck
-
2
Scale: 1:14Dimensions: length 633, width 230, height 273 (excluding antenna 233),unit: mmWheelbase: total wheelbase 369mmFront shock absorber stroke: 20 mmBattery Specification: 3S, 5200mAh, 11.1v, above 25C; batterycompartment size: 142 * 45 * 40MM (battery size is within this range)battery needs to be purchased separatelyWeight: 3.3kgTheoretical load: 8kgTotal weight: 12kgController needs to be purchased separately
-
3
Remove the cab
Remove the hood
-
4
Remove the hood
Remove the battery boxRemove the holder and thecable mount piece
-
5
Install the steering gear(the steering gear needs tobe purchased separately)
-
6
-
7
Use BHCS M3*8mmUse BHCS M3*8mm
Install the variable speedsteering gear (thesteering gear needs to bepurchased separately)
-
8
(Install 4pc FHCS M3 * 8mm)
Assemble the cable mountand install 2pc of BHCS M3* 8mm
Remove the gearbox
-
9
Install the gearbox (the motorneeds to be purchasedseparately)
-
10
The motor needs to bepurchased separately. It isrecommended to use 35T,2pc of SHCS m3 * 6mm.
-
11
-
12
-
13
Put on the cable, fasten thecable screw with properforce, and ensure thesheath fastening passesthrough smoothly
-
14
The cable passes through thecable seat
Installation diff locking,general assembly picture(mark for easy adjustmentwhen finishing assembling)
-
15
-
16
-
17
-
18
-
19
Install the cab
-
20
Install the hood Install the front bumper
-
21
-
22
Install the wiper
-
23
Install the antenna
Install the front grill and side grill
-
24
Install the snorkel cap
Install the right rear mirror
-
25
Install the battery
-
26
Open the door
-
27