JD Edwards EnterpriseOne Tools 8.9x Minimum Technical ... MTRs.pdf · • Enterprise (logic and...

Welcome Back Ken Wong representing Profit Concepts International,

Implementation Guide

Optimization Guide

Upgrade Guide

Additional Search Engines:

Improve search results | Site index

» Knowledge Browser» SARs» Update Center» Course Catalog

» Advisor Webcasts» Contact Directory» Global Customer Care

Directory» Email Subscription Center» Global Support Center

Directory» New Customers Start Here

JD Edwards EnterpriseOne Tools 8.9x Minimum Technical Requirements for EnterpriseServers

Last Updated: 02-01-2008 Release Level: 8.97

Please seethe Informational Web Sites for upgrade and sizing issues of the particularhardware and software supporting EnterpriseOproducts. Links to these websites are located on the current MTR index page.

Topics in this Document

• Hardware Requirements

· Operating System Requirements for Linux(x86) 32-Bit

ONLY THE SOFTWARE AND PLATFORMS SHOWN IN THE CHARTS BELOW ARE SUPPORTED

ANY DEVIATIONS WILL NOT BE SUPPORTED

of 12

2/14/2008http://www.peoplesoft.com/corp/en/iou/platforms/enterpriseone.jsp?doc=3046503c39ff27ac88256ebe00290333/$FILE/erp9-ent...

• Operating System Requirements for HP-UX(PA-RISC)

• Operating System Requirements for HP-UX(Itanium)

• Operating System Requirements forMicrosoft Windows (x86) 32-Bit

• Operating System Requirements for Solaris(UltraSPARC)

• Operating System Requirements for AIX (IBMpSeries)

• Operating System Requirements for OS/400(IBM iSeries)

The following tables list minimum hardware and softwaretechnical requirements for JD Edwards EnterpriseOne 8.9.

Information Common for all Software and Hardware

• Additional requirements may apply in clusteredserver environments. See the Cluster Server MTR for more details.

• Only the operating system and platformcombinations indicated in the charts below are supported.

• Specific vendor hardware and softwareinformation is available in the Informational Web Sites for EnterpriseOne 8.9xdocument

Hardware Requirements

• Contact your specific hardware representativefor optimal system configurations.

• Sizing information is provided by the hardwarerepresentatives.

• It is critical to check with your hardwarevendor for sizing requirements when upgrading from XE or ERP 8 to EnterpriseOnerele8.9 or later.

Printer Support

• Non-DoubleByte: Post Script Language Level 2, PCL 5 or line printer.

of 12


• PCL 5 is only supported for non-DoubleByte customers.

• DoubleByte: Genuine Adobe Systems PostScript Language Level 2 Interpreter version 2015, orPostScript Language Level 3.

• EnterpriseOne uses CID Font Technology. Support starts at Language Level 2 Interpreter 2015.

• It has been discovered that some third-partyinterpreters of PostScript Language Level 2 will not properly print CID-Fontbased DoubleByte PostScript.

Linux (x86) 32-Bit

Operating System

Oracle Enterprise Linux 4

Note: Some installation scripts require a Korn shell interpreter. Installation of thpdksh package is required.

Note: In order to use the compress option on the EnterpriseOne package buildyou must install the “ncompress” rpm package. This package is normally installed during the Oracle Enterprise Linux 4 installation process.

Note: Oracle Enterprise Linux 4 is supported starting with EnterpriseOne Tools8.96.2 (8.96 update 2)

Note: Update 4 is required to be installed

Note: Only 32 bit systems are supported on Linux.

Note: IBM products (WebSphere, DB2, IBM Directory Server, WebSphere MQhave not been validated with EnterpriseOne on Oracle Enterprise Linux.

Red Hat Enterprise Linux AS/ES 3.0

Note: Some installation scripts require a Korn shell interpreter. Installation of tRed Hat pdksh package is required.

Note: Red Hat Enterprise Linux AS/ES 3.0 is only supported with EnterpriseOTools 8.96


Note: Only 32 bit systems are supported on Linux.

of 12


HP-UX (PA-RISC)

Note: Red Hat Enterprise Linux AS/ES 3.0 is not supported with EnterpriseOnTools 8.97. Customers are advised to upgrade to supported Linux 4.0 version.

Red Hat Enterprise Linux AS/ES 4.0

Note: Some installation scripts require a Korn shell interpreter. Installation of theHat pdksh package is required.

Note: In order to use the compress option on the EnterpriseOne package build, must install the RedHat “ncompress” package. This package is normally noinstalled on Red Had Enterprise Linux AS/ES 4.0.

Note: Red Hat Enterprise Linux AS/ES 4.0 is supported starting with EnterpriseOTools 8.96


Note: Update 4 is supported beginning with EnterpriseOne Tools 8.96.2.0

Note: Only 32 bit systems are supported on Linux. Java Runtime E1 8.96-8.97

Version 1.4.2 Note: Bundled with E1 Software.

ANSI C Compiler

gcc version 3.2 Note: The gcc version 3.2 compiler is supported only with Red Hat Enterprise LiAS/ES 3.0

gcc version 3.4 Note: The gcc version 3.4 compiler is supported only with Red Hat Enterprise LiAS/ES 4.0 or Oracle Enterprise Linux 4

Operating System

HP-UX 11i (11.11)

Note: Patches PHCO_25841, PHKL_26269, and PHKL_28025 or superceding patches are required. These patches provide RockRidge format CD support using mount.

Note: Version B.11.11.14 of the HP C/ANSI C Developer’ Bundle is required beginning with 8.96.

HP-UX 11i v2 (11.23)

Java Runtime E1 8.9x-8.95 Note: Found on OS install CD

of 12


HP-UX (Itanium)

Version 1.3.1

E1 8.96-8.97 Version 1.4.2

Note: Bundled with E1 Software.

ANSI C Compiler

HP C/ANSI C Compiler

Operating System

HP-UX 11i v2 (11.23)

Support with application release 8.12 begins with JD Edwards EnterpriseOne Tools 8.96_E1.

Support with application release 8.11 SP1 begins with JD Edwards EnterpriseOne To8.96.1.4.

Application releases prior to 8.11 SP1 are not supported on HP-UX on Itanium processors.

Support extends to the following tiers of the JD Edwards EnterpriseOne architecture:

• Enterprise (logic and batch) server

• Database server running Oracle Database 10g or IBM DB2 Universal DatabaseRefer to the Database Software MTR for more information.

• Web server running Oracle Application Server 10g or IBM WebSphere ApplicatiServer. Refer to the Web Servers MTR for more information.

• Oracle Portal. Refer to the Collaborative Portal MTR for more information.

EnterpriseOne support for HP-UX on Itanium 2 processors currently excludes the following components:

• Collaborative Portal with IBM WebSphere Portal

• XPI and Web Services Gateway

• Crystal Enterprise Server

of 12


Microsoft Windows Server(x86) 32-Bit

• Advanced search functionality such as is available in the following EnterpriseOnapplications:

• Solution Advisor

• Search eRecruit Applicants

• Custom text search indexes

Refer to the appropriate MTR documents for explicit platform support information for other components. Note: HP-UX on Itanium requires LDAP-UX Integration for HP-UX libraries. These

currently must be obtained from HP. See the MTR Informational Websites folink to the HP-UX LDAP-UX product site.

Java Runtime E1 8.96-8.97 Version 1.4.2


ANSI C Compiler

HP C/ANSI C Compiler

Operating System

Windows Server 2003 32 Bit

Note: Database restrictions exist. Refer to the Database Software MTR for specifics.

Note: Windows Server 2003 SP1 is supported starting with EnterpriseOne 8.9 wTools Release 8.93_R1

Note: Windows 2003 SP2 is supported beginning with Enterprise One 8.9 – TooRelease 8.96. Support for service packs is valid for Windows 2003 and Windows 2003 R2

Note: Windows Server 2003 R2 is supported starting with EnterpriseOne 8.9 witTools Release 8.93_R1

Note: Oracle validates JD Edwards EnterpriseOne products with Microsoft WindServer 2003 Standard Edition. This validation also extends to Windows Ser2003 Enterprise Edition and Datacenter Edition. Customers who choose to implement EnterpriseOne on Windows Server 2003 Enterprise Edition or Datacenter Edition will receive support services according to their EnterpriseOne services agreement.

Note: Only 32 bit systems are supported on Windows.

of 12


Table 1: Microsoft C++ CompilerRequirements

Java Runtime E1 8.9x-8.95 Version 1.3.1

Note: Download from SUN Microsystems Web Site.

E1 8.96-8.97 Version 1.4.2


ANSI C Compiler

Microsoft Visual C++ 6.0

Note: See Table 1

Microsoft Visual C++ .NET 2003

Note: See Table 1

Microsoft Visual C++ .NET 2005

Support begins with EnterpriseOne Tools 8.97 Note: See Table 1

8.9 SP2 Tools 8.93 Tools 8.94 / 8.95 / 8.96 Tools

8.97 Tools

8.9 Apps Compiler:

Visual Studio C++ 6.0 SP5 or SP6

Compiler:


Compiler:

Visual Studio C++ 6.0 (SP5 or SP6) and RTL 7.1

Compiler:


8.10 Apps N/A Compiler:


Compiler:


Compiler:


8.11 and 8.11 SP1 Apps

N/A N/A Compiler:

Visual Studio C++ .NET 2003 SP1

Compiler:


8.12 Apps N/A N/A Compiler:


Compiler:


of 12


Note: Configuration information for Visual StudioC++ .NET 2005 is included in the PackageManagement Guide 8.97.

RTL = Runtime Libraries.

Prior to 8.97, these DLLs should be located in the Windowssystem32 directory. With 8.97 the DLLsneed to be located in the EnterpriseOne system/bin32 directory. The required runtime DLLs will be installedas part of EnterpriseOne.

Table 2: Runtime Libraries DLLs

or

Compiler:

Visual Studio C++ .NET 2005 SP1 (See Note)

Visual Studio C++ .NET 2003 SP1 (RTL 7.1) Visual Studio C++ .NET 2005 SP1 (RTL 8.0) atl71.dll

MFC71.dll

MFC71u.dll

Msvcp71.dll

Msvcr71.dll

atl80.dll

mfc80.dll

mfc80u.dll

mfcm80.dll

mfcm80u.dll

msvcm80.dll

of 12


EnterpriseOne 8.9 and 8.10 Apps do not support the VisualStudio C++ .NET 2003 compiler.

In order to install VC 6.0 the user will need to acquire andlicense the Visual Studio .NET software from Microsoft.

Install the .NET version then follow the downgradeinstructions from the Microsoft web site referenced in the EnterpriseOne 8.9Informational Web Sites document.

Solaris (UltraSPARC)

msvcp80.dll

msvcr80.dll

Operating System

Solaris 8 Note: The minimum level for the standard C shared library (libc.so) is 108993-2(You can check the current level of your C library by running the commandwhat /usr/lib/libc.so)

Solaris 9

Solaris 10


Note: Found on OS Install CD

E1 8.96-8.97 Version 1.4.2


ANSI C Compiler

Sun ONE Studio 8 (Sun C 5.5)

Sun Studio 9 (Sun C 5.6)



of 12


AIX (IBM pSeries)

OS/400 (IBM iSeries)


Operating System

AIX 5.2 Note: For AIX 5.2, Service Pack 2 (5200_08_02) is required if Technology Level 8 been installed.

AIX 5.3 Note: For AIX 5.3, Technology Level 5 (5300_05) is the minimum required fix packNote: For AIX 5.3, Service Pack 01-0722 (5300_06_01_0722) is required if

Technology Level 6 has been installed. Note: LDR_CNTRL=NOKRTL environment variable is no longer supported, and mu

be removed.


Note: Found on OS install CD

E1 8.96-8.97 Version 1.4.2


ANSI C Compiler

IBM XL C for AIX Version 7.0 or 8.0

Note: IBM C for AIX is the C language subset of the Visual Age C/C++ product andcan be purchased and installed separately.

Note: Installation of the Visual Age C/C++ Compiler also complies to this MTR, because it includes the IBM C for AIX product.

Operating System

OS/400 V5R3 Note: For required PTF listings, reference IBM Informational sites. Please refer to Table 3 below.

Note: Support for V5R3 starts with EnterpriseOne 8.93_D1. Note: Rapid Install 8.10 is supported. Post install requires application of 8.93_D1 o

later.

OS/400 V5R4 and V5R4M5

Note: For required PTF listings, reference IBM Informational sites. Please refer to Table 3 below.

Note: Support for V5R4 and V5R4M5 on EnterpriseOne 8.95 begins with 8.95_E1Note: Support for V5R4 and V5R4M5 on EnterpriseOne 8.96 begins with 8.96_A1


Note: Found on Program Product CD. Please refer to Table 3 below.

E1 8.96-8.97 Note: Found on Program Product CD. Please refer to Table 3 below.

of 12




Optimization Guide

Upgrade Guide







JD Edwards EnterpriseOne Tools 8.9x Minimum Technical Requirements forDatabase Software

LastUpdated: 10-18-2007 ReleaseLevel: GA


Requirements for Oracle Database Requirements forOracle Database Communications

SUPPORT FOR SQL SERVER 2000 DATABASE WILL END APRIL 2008



Page 1 of 39

2/14/2008http://www.peoplesoft.com/corp/en/iou/platforms/enterpriseone.jsp?doc=fa9ca34ea9293fb588256ebe0027e519/$FILE/erp9-dat...

Requirements forOracle Enterprise Linux 4 (x86) Oracle Database Requirements for RedHatLinux 3.0 (x86) Oracle Database Requirements for RedHatLinux 4.0 (x86) Oracle Database Requirements for HP UX (PA-RISC)Oracle Database Requirements for HP-UX(Itanium) Oracle Database Requirements for MicrosoftWindows (x86) Oracle Database Requirements for Solaris(UltraSPARC) Oracle Database Requirements for AIX (IBM pSeries)Oracle Database

Requirements for SQL Server2005 Database Requirementsfor SQL Server 2005 Database Communications

Requirements for SQL Server2000 Database Requirementsfor SQL Server 2000 Database Communications

Requirements for DB2 UDB foriSeries Requirementsfor DB2 UDB for iSeries Database Communications

Requirements for DB2 UDB Database Requirements for DB2 UDBDatabase for RedHat Linux 3.0 (x86) Requirements for DB2 UDBDatabase for RedHat Linux 4.0 (x86) Requirements for DB2 UDBDatabase for Microsoft Windows (x86) Requirements for DB2 UDBDatabase for HP-UX 11.11 (PA-RISC) Requirements for DB2 UDBDatabase for HP-UX 11.23 update 2 (PA-RISC) Requirements for DB2 UDB Databasefor HP-UX 11.23 update 2 (Itanium) Requirements for DB2 UDBDatabase for Solaris (UltraSPARC) Requirements for DB2 UDBDatabase for AIX (IBM pSeries) Requirements for DB2UDB Database Communications and Administration

Page 2 of 39


The following tables list minimum database softwaretechnical requirements for JD Edwards EnterpriseOne 8.9.

Information Common for all Database Software

Additional requirements apply in clustered database server environments. See below for specific clustered database requirements. Only the database software and platforms indicated in the charts below are supported. Specific Vendor Hardware and Software Information available at Informational Web Sites for JD Edwards EnterpriseOne 8.9document. Unless otherwise noted in this document, requirements for hardware platform (processor), operating system, and patch levefor the database server are the same as for the enterprise server. Refer to the Enterprise Server MTR document for details.

Requirements for Oracle Database

TO AVOID A POTENTIAL OPERATIONAL FAILURE

ORACLE HIGHLY RECOMMENDS THAT CUSTOMERS REVIEW VENDOR REQUIREMENTS FOR ADDITIONAL OPERATING SYSTEM PATCHES THAT NEED TO BE INSTALLED PRIOR TO ANY DATABASE UPGRADES OR

UPDATES

Database Software Minimum Version

AIX (IBM

pSeries)

HP-UX (PA-

RISC)

HP-UX (Itanium)


Linux (x86)

Microsoft Windows

(x86)

Oracle 9i R2 32 Bit Version 9.2.0.4 Version 9.2.0.5 Version 9.2.0.6 Version 9.2.0.7 Version

X For Specifics SEE BELOW

Page 3 of 39


9.2.0.8

Oracle 9i R2 64 Bit Version 9.2.0.4 Version 9.2.0.5 Version 9.2.0.6 Version 9.2.0.7 Version 9.2.0.8

X For

Specifics SEE

BELOW

X For

Specifics SEE

BELOW

X For

Specifics SEE

BELOW


Oracle 10g R1 32 Bit Version 10.1.0.4 Version 10.1.0.5


Oracle 10g R1 64 Bit Version 10.1.0.4 Version 10.1.0.5

X For

Specifics SEE

BELOW

X For

Specifics SEE

BELOW

X For

Specifics SEE

BELOW


Oracle 10g R2 32 Bit Version 10.2.0.1 Version 10.2.0.2 Version 10.2.0.3

X For Oracle Enterprise

Linux 4 Specifics

SEE BELOW

X

For Red Hat 3.0

Specifics SEE

BELOW X

For Red Hat 4.0

Specifics


Page 4 of 39


SEE BELOW

Oracle 10g R2 64 Bit Version 10.2.0.1 Version 10.2.0.2 Version 10.2.0.3

X For

Specifics SEE

BELOW

X For

Specifics SEE

BELOW

X For

Specifics SEE

BELOW



Linux 4 Specifics

SEE BELOW

X

For Red Hat 4.0

Specifics SEE

BELOW


Oracle 11g R1 32 Bit Version 11.1.0.6


Linux 4 Specifics

SEE BELOW

X

For Red Hat 4.0

Specifics SEE

BELOW

General Information: Note: Only Oracle Certified Database Version and Operating System is supported. (See Oracle MetaLink) Note: Beginning with JD Edwards EnterpriseOne Application Release 8.11 used with JD Edwards

EnterpriseOne Tools 8.94 Oracle is supported with EnterpriseOnePlatform Pack. Note: Raw devices are supported with the Oracle database. Please note that when the

EnterpriseOnePlatform Pack is used only operating system created disk “mount points” can be used. (Ex. /u01/…). Customers choosing to use raw devices must create the entire database including all necessary JD Edwards EnterpriseOne tablespaces using their chosen raw devices.

Oracle 9i R2: ALERT: Oracle 9i R2: Oracle has recommended that only versions 9.2.0.4, 9.2.0.5, 9.2.0.6, 9.2.0.7 or 9.2.0.8

be used based on the patch fixes for the Security Alert 68 they issued. Please use the Oracle MetaLink site and reference the document ID# 282108.1 for specific details.

Note: Oracle 9i R2: Oracle Server: Standard Edition or Enterprise Edition is supported in 64 bit for AIX (IBM pSeries), HP-UX (PA-RISC), HP-UX (Itanium), and Solaris (UltraSPARC). 32 bit is supported for

Page 5 of 39


Microsoft Windows (x86) and Red Hat Linux (x86). Note: Oracle 9i R2: (9.2.0.4, 9.2.0.5, 9.2.0.6, 9.2.0.7 or 9.2.0.8) Real Application Clusters (RAC) Option is

supported beginning with JD Edwards EnterpriseOne 8.93_A1 Note: Oracle 9i R2: JD Edwards EnterpriseOne 8.9 Shared Libraries used with Oracle 9.2.0.4, 9.2.0.5,

9.2.0.6, 9.2.0.7 or 9.2.0.8 Database: libora90.so AIX (IBM pSeries), Solaris (UltraSPARC) and HP-UX (Itanium) libora90.sl HP-UX (PA-RISC)

jdboci90.dll Microsoft Windows (x86) Oracle 10g R1: Note: Oracle 10g R1: (10.1.0.4, 10.1.0.5) Database software is supported beginning with JD Edwards

EnterpriseOne 8.95_A1. Note: Oracle 10g R1: Oracle Server: Standard Edition One, Standard Edition or Enterprise Edition is

supported in 64 bit for AIX (IBM pSeries), HP-UX (PA-RISC), HP-UX (Itanium), and Solaris (UltraSPARC). 32 bit is supported for Microsoft Windows (x86).

Note: Oracle 10g R1: (10.1.0.4, 10.1.0.5) Real Application Clusters (RAC) Option is supported beginning with JD Edwards EnterpriseOne 8.95_A1 (See specific platforms supported below)

Note: Oracle 10g R1: JD Edwards EnterpriseOne 8.95_A1 Shared Libraries used with Oracle 10.1.0.4, 10.1.0.5 Database:

libora101.so AIX (IBM pSeries), Solaris (UltraSPARC) and HP-UX (Itanium) libora101.sl HP-UX (PA-RISC) jdboci101.dll Microsoft Windows (x86)

Oracle 10g R2: Note: After installation of the Oracle Database software ORACLE_HOME and subsequent directories will

have the wrong permissions. This problem will only allow only the OS user oracle to be able to run such programs as SQL*Plus. You must apply the following patch which is available from Oracle Metalink: 4516865

Note: Oracle 10g R2: (10.2.0.3) Be sure to read and execute all of the appropriate Post Installation steps after this patch is applied. Specifically on UNIX installations the changePerm.sh script execution.

Note: Oracle 10g R2: (10.2.0.1, 10.2.0.2, 10.2.0.3) Database software is supported beginning with JD Edwards EnterpriseOne 8.96

Note: Oracle 10g R2: (10.2.0.2, 10.2.0.3) Database software is supported in 64 bit for Microsoft Windows x64 Edition (x86-64) beginning with JD Edwards EnterpriseOne 8.96.1

Note: Oracle 10g R2: (10.2.0.2, 10.2.0.3) Database software is supported in 64 bit for Oracle Enterprise Linux and Red Hat Linux x64 (x86-64) beginning with JD Edwards EnterpriseOne 8.96.2

Note: Oracle 10g R2: Oracle Server: Standard Edition One, Standard Edition or Enterprise Edition is supported in 64 bit for Microsoft Windows x64 Edition (x86-64), AIX (IBM pSeries), HP-UX (PA-RISC), HP-UX (Itanium), Oracle Enterprise Linux and Red Hat Linux x64 (x86-64), and Solaris (UltraSPARC). 32 bit is supported for Microsoft Windows (x86), Oracle Enterprise Linux and Red Hat Linux (x86).

Note: Oracle 10g R2: (10.2.0.1, 10.2.0.2, 10.2.0.3) Real Application Clusters (RAC) Option is supported beginning with JD Edwards EnterpriseOne 8.96 (See specific platforms supported below)

Note: Oracle 10g R2: (10.2.0.2, 10.2.0.3) Real Application Clusters (RAC) Option is supported in 64 bit for Microsoft Windows x64 Edition (x86-64) beginning with JD Edwards EnterpriseOne 8.96.1

Note: Oracle 10g R2: (10.2.0.1, 10.2.0.2, 10.2.0.3) JD Edwards EnterpriseOne 8.96 Shared Libraries used with Oracle 10.2.0.1, 10.2.0.2, 10.2.0.3 Database:

libora101.so AIX (IBM pSeries), Solaris (UltraSPARC), Linux (x86) and HP-UX (Itanium) libora101.sl HP-UX (PA-RISC)

Page 6 of 39


Requirements for Oracle Database Communications

jdboci101.dll Microsoft Windows (x86) and Microsoft Windows x64 Edition (x86-64) Oracle 11g R1: Note: Oracle 11g R1: (11.1.0.6) Database software is supported on Oracle Enterprise Linux 4.0 (x86) 32-

bit and Red Hat Linux 4.0 (x86) 32-bit beginning with EnterpriseOne Tools 8.97 Note: Oracle 11g R1: Oracle Server: Standard Edition One, Standard Edition or Enterprise Edition is

supported for Oracle Enterprise Linux 4.0 (x86) 32-bit and Red Hat Linux 4.0 (x86). Note: Oracle 11g R1: When using a Microsoft Windows Client with Oracle 11g R1 Database on Linux

download and use the Oracle 10g R2 Client available from the Oracle E-Delivery website.(Part Number B24559-01)

Note: Oracle 11g R1: (11.1.0.6) Real Application Clusters (RAC) Option is supported beginning with JD Edwards EnterpriseOne 8.97 (See specific platforms supported below)

Note: Oracle 11g R1: JD Edwards EnterpriseOne 8.97 Shared Libraries used with Oracle 11.1.0.6 Database:

libora111.so Linux (x86) Oracle Real Application Clusters (RAC) Option: Note: Certifications for Real Application Clusters are performed against the Operating System and

Clusterware versions. The corresponding system hardware is offered by system vendors and specialized technology vendors. Some system vendors offer pre-installed, pre-configured RAC clusters. Oracle will support the Oracle software on clusters comprised of RAC compatible technologies and certified software combinations. Please consult your hardware vendor as not all vendors may choose to support their hardware in every possible cluster combination. Only the database software and platforms indicated in the charts below are supported.

Oracle Database

Communications

AIX (IBM

pSeries)

HP-UX (PA-

RISC)

HP-UX (Itanium)


Linux (x86)

Microsoft Windows

(x86)Oracle Client Software X X X X X X PROTOCOL

Note: Only TCP/IP and IPC Protocols are supported.

IPC PROTOCOL Note: IPC Protocol should be used when running JD Edwards EnterpriseOne Server Software on the same

server as the database. Note: An Oracle Client is considered any machine that needs to communicate with the Database Server. Note: The Oracle Client Software must match the release version of Oracle Server Software. Note: Oracle 11g R1: When using a Microsoft Windows Client with Oracle 11g R1 Database on Linux


Page 7 of 39


Requirements for Oracle Enterprise Linux 4.0 (x86) Oracle Database(EnterpriseOn8.96)

Note: The Oracle sqlnet.ora file and tnsnames.ora file must be configured to communicate with the Database Server Oracle Database.

Operating System Requirements

Minimum Supported Oracle Versions

Oracle Enterprise Linux 4 Update 4 Required

Oracle Server Standard Edition One Oracle 10g R2 - 32 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 32 Bit 10.2.0.2 (Reference MetaLink Note 363721.1) Oracle 10g R2 - 64 Bit 10.2.0.2 Oracle 10g R2 - 32 Bit 10.2.0.3 Oracle 10g R2 - 64 Bit 10.2.0.3 Oracle 11g R1 - 32 Bit 11.1.0.6 Oracle Server Standard Edition Oracle 10g R2 - 32 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 32 Bit 10.2.0.2 (Reference MetaLink Note 363721.1) Oracle 10g R2 - 64 Bit 10.2.0.2 Oracle 10g R2 - 32 Bit 10.2.0.3 Oracle 10g R2 - 64 Bit 10.2.0.3 Oracle 11g R1 - 32 Bit 11.1.0.6 Oracle Server Enterprise Edition Oracle 10g R2 - 32 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 32 Bit 10.2.0.2 (Reference MetaLink Note 363721.1) Oracle 10g R2 - 64 Bit 10.2.0.2 Oracle 10g R2 - 32 Bit 10.2.0.3 Oracle 10g R2 - 64 Bit 10.2.0.3 Oracle 11g R1 - 32 Bit 11.1.0.6 Oracle Server RAC Option Oracle 10g R2 – 32 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 32 Bit 10.2.0.2 (Reference MetaLink Note 363721.1) Oracle 10g R2 - 64 Bit 10.2.0.2 Oracle 10g R2 - 32 Bit 10.2.0.3 Oracle 10g R2 - 64 Bit 10.2.0.3 Oracle 11g R1 - 32 Bit 11.1.0.6

General Information: Note: Oracle Enterprise Linux 4 – Update 4 is supported with Oracle 10g R2 and Oracle 11g R1

Page 8 of 39


Requirements for Red Hat Linux 3.0 (x86) OracleDatabase (EnterpriseOne 8.96)

Note: Please see specific Oracle version below for compatible Operating System Version Note: Refer to current release notes and Oracle Metalink Note: Raw devices are supported with the Oracle database. Please note that when the EnterpriseOnePlatform

Pack is used only operating system created disk “mount points” can be used. (Ex. /u01/…). Customers choosing to use raw devices must create the entire database including all necessary JD Edwards EnterpriseOne tablespaces using their chosen raw devices.

Oracle 10g R2: Note: Oracle 10g R2: Database software is supported beginning with JD Edwards EnterpriseOne 8.96 for 32-bit,

8.96.2 for 64-bit Note: Oracle 10g R2: Oracle requires use of Oracle Enterprise Linux 4 – Update 4 Note: Oracle 10g R2: (10.2.0.3) Be sure to read and execute all of the appropriate Post Installation steps after

this patch is applied. Specifically on UNIX installations the changePerm.sh script execution. Oracle 11g R1: Note: Oracle 11g R1: Database software is supported beginning with JD Edwards EnterpriseOne 8.97 for 32-bit Note: Oracle 11g R1: Oracle requires use of Oracle Enterprise Linux 4 – Update 4 Note: Oracle 11g R1: When using a Microsoft Windows Client with Oracle 11g R1 Database on Linux download

and use the Oracle 10g R2 Client available from the Oracle E-Delivery website.(Part Number B24559-01)

Oracle Real Application Clusters (RAC) Option: Note: Refer to the Oracle Metalink Certification Matrices and Product Availability for platform specific

requirements that must be met when using the RAC option of Oracle Database. Note: When using Oracle RAC with JD Edwards EnterpriseOne the following Oracle parameter must be set:

max_commit_propagation_delay = 0



Red Hat Enterprise Linux AS/ES 3.0 – Update 5 Required

Oracle Server Standard Edition One Oracle 10g R2 - 32 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 32 Bit 10.2.0.2 (Reference MetaLink Note 363721.1) Oracle 10g R2 - 32 Bit 10.2.0.3 Oracle 10g R2 - 64 Bit – Not supported with JD Edwards EnterpriseOne Oracle Server Standard Edition Oracle 10g R2 - 32 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 32 Bit 10.2.0.2 (Reference MetaLink Note 363721.1) Oracle 10g R2 - 32 Bit 10.2.0.3 Oracle 10g R2 - 64 Bit – Not supported with JD Edwards EnterpriseOne

Page 9 of 39


Requirements for Red HatLinux 4.0 (x86) Oracle Database (EnterpriseOne 8.96)

Oracle Server Enterprise Edition Oracle 10g R2 - 32 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 32 Bit 10.2.0.2 (Reference MetaLink Note 363721.1) Oracle 10g R2 - 32 Bit 10.2.0.3 Oracle 10g R2 - 64 Bit – Not supported with JD Edwards EnterpriseOne Oracle Server RAC Option Oracle 10g R2 - 32 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 32 Bit 10.2.0.2 (Reference MetaLink Note 363721.1) Oracle 10g R2 - 32 Bit 10.2.0.3 Oracle 10g R2 - 64 Bit – Not supported with JD Edwards EnterpriseOne

General Information: Note: Red Hat Enterprise Linux AS/ES 3.0 – Update 5 is supported in 32 Bit Only Note: Red Hat Enterprise Linux AS/ES 3.0 – Update 5 is supported with Oracle 10g R2 Note: Red Hat Enterprise Linux AS/ES 3.0 is not supported with EnterpriseOne Tools 8.97. Customers are

advised to upgrade to supported Linux 4.0 version. Note: Please see specific Oracle version below for compatible Operating System Version Note: Refer to current release notes and Oracle Metalink Note: 169706.1 for necessary O/S Kernel settings. Note: Raw devices are supported with the Oracle database. Please note that when the EnterpriseOnePlatform


Oracle 10g R2: Note: Oracle 10g R2: Database software is supported beginning with JD Edwards EnterpriseOne 8.96 Note: Oracle 10g R2: Oracle requires use of RedHat Enterprise Linux Advanced Server 3.0 – Update 5 Note: Oracle 10g R2: (10.2.0.3) Be sure to read and execute all of the appropriate Post Installation steps after

this patch is applied. Specifically on UNIX installations the changePerm.sh script execution.






Page 10 of 39


Red Hat Enterprise Linux AS/ES 4.0 – Update 2 Required

Oracle Server Standard Edition One Oracle 10g R2 - 32 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 32 Bit 10.2.0.2 (Reference MetaLink Note 363721.1) Oracle 10g R2 - 64 Bit 10.2.0.2 Oracle 10g R2 - 32 Bit 10.2.0.3 Oracle 10g R2 - 64 Bit 10.2.0.3 Oracle 11g R1 - 32 Bit 11.1.0.6 Oracle Server Standard Edition Oracle 10g R2 - 32 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 32 Bit 10.2.0.2 (Reference MetaLink Note 363721.1) Oracle 10g R2 - 64 Bit 10.2.0.2 Oracle 10g R2 - 32 Bit 10.2.0.3 Oracle 10g R2 - 64 Bit 10.2.0.3 Oracle 11g R1 - 32 Bit 11.1.0.6 Oracle Server Enterprise Edition Oracle 10g R2 - 32 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 32 Bit 10.2.0.2 (Reference MetaLink Note 363721.1) Oracle 10g R2 - 64 Bit 10.2.0.2 Oracle 10g R2 - 32 Bit 10.2.0.3 Oracle 10g R2 - 64 Bit 10.2.0.3 Oracle 11g R1 - 32 Bit 11.1.0.6 Oracle Server RAC Option Oracle 10g R2 – 32 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 32 Bit 10.2.0.2 (Reference MetaLink Note 363721.1) Oracle 10g R2 - 64 Bit 10.2.0.2 Oracle 10g R2 - 32 Bit 10.2.0.3 Oracle 10g R2 - 64 Bit 10.2.0.3 Oracle 11g R1 - 32 Bit 11.1.0.6

General Information: Note: Red Hat Enterprise Linux AS/ES 4.0 – Update 2 is supported with Oracle 10g R2 and Oracle 11g R1 Note: Please see specific Oracle version below for compatible Operating System Version Note: Refer to current release notes and Oracle Metalink Note: Raw devices are supported with the Oracle database. Please note that when the EnterpriseOnePlatform


Oracle 10g R2: Note: Oracle 10g R2: Database software is supported beginning with JD Edwards EnterpriseOne 8.96 for 32-

bit, 8.96.2 for 64-bit Note: Oracle 10g R2: Oracle requires use of Red Hat Enterprise Linux Advanced Server 4.0 – Update 2 Note: Oracle 10g R2: Red Hat Enterprise Linux Advanced Server 4.0 Update 4 is supported starting with

8.96.2.0 Note: Oracle 10g R2: (10.2.0.3) Be sure to read and execute all of the appropriate Post Installation steps after

Page 11 of 39


Requirements for HP-UX (PA-RISC) Oracle Database

this patch is applied. Specifically on UNIX installations the changePerm.sh script execution. Oracle 11g R1: Note: Oracle 11g R1: Database software is supported beginning with JD Edwards EnterpriseOne 8.97 for 32-

bit Note: Oracle 11g R1: Oracle requires use of Red Hat Enterprise Linux Advanced Server 4.0 – Update 2 Note: Oracle 11g R1: When using a Microsoft Windows Client with Oracle 11g R1 Database on Linux







HP-UX (PA-RISC) 11i (11.11) HP-UX (PA-RISC) 11i v2 (11.23)

Oracle Server Standard Edition One Oracle 10g R1 - 64 Bit 10.1.0.4 Oracle 10g R1 - 64 Bit 10.1.0.5 Oracle 10g R2 - 64 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 64 Bit 10.2.0.2 (Reference MetaLink Note 363721.1) Oracle 10g R2 - 64 Bit 10.2.0.3 Oracle Server Standard Edition Oracle 9i R2 - 64 Bit 9.2.0.4 Oracle 9i R2 - 64 Bit 9.2.0.5 Oracle 9i R2 - 64 Bit 9.2.0.6 (See MetaLink DocID 292946.1) Oracle 9i R2 - 64 Bit 9.2.0.7 (See MetaLink DocID 292946.1) (Apply Patch 4533592) Oracle 9i R2 - 64 Bit 9.2.0.8 Oracle 10g R1 - 64 Bit 10.1.0.4 Oracle 10g R1 - 64 Bit 10.1.0.5 Oracle 10g R2 - 64 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 64 Bit 10.2.0.2 (Reference MetaLink Note 363721.1) Oracle 10g R2 - 64 Bit 10.2.0.3 Oracle Server Enterprise Edition Oracle 9i R2 - 64 Bit 9.2.0.4 Oracle 9i R2 - 64 Bit 9.2.0.5

Page 12 of 39


Oracle 9i R2 - 64 Bit 9.2.0.6 (See MetaLink DocID 292946.1) Oracle 9i R2 - 64 Bit 9.2.0.7 (See MetaLink DocID 292946.1) (Apply Patch 4533592) Oracle 9i R2 - 64 Bit 9.2.0.8 Oracle 10g R1 - 64 Bit 10.1.0.4 Oracle 10g R1 - 64 Bit 10.1.0.5 Oracle 10g R2 - 64 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 64 Bit 10.2.0.2 (Reference MetaLink Note 363721.1) Oracle 10g R2 - 64 Bit 10.2.0.3 Oracle Server RAC Option Oracle 9i R2 - 64 Bit 9.2.0.4 Oracle 9i R2 - 64 Bit 9.2.0.5 Oracle 9i R2 - 64 Bit 9.2.0.6 (See MetaLink DocID 292946.1) Oracle 9i R2 - 64 Bit 9.2.0.7 (See MetaLink DocID 292946.1) (Apply Patch 4533592) Oracle 9i R2 - 64 Bit 9.2.0.8 Oracle 10g R1 - 64 Bit 10.1.0.4 Oracle 10g R1 - 64 Bit 10.1.0.5 Oracle 10g R2 - 64 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 64 Bit 10.2.0.2 (Reference MetaLink Note 363721.1) Oracle 10g R2 - 64 Bit 10.2.0.3

General Information: Note: Please see specific Oracle version below for compatible Operating System Version Note: This is a 64 Bit product and 64 Bit hardware is absolutely required. Note: Refer to current release notes and Oracle Metalink Note: 169706.1 for necessary O/S Kernel settings. Note: Verify the following symbolic links are created: cd /usr/lib

ln -s /usr/lib/libX11.3 libX11.sl ln -s /usr/lib/libXIE.2 libXIE.sl ln -s /usr/lib/libXext.3 libXext.sl ln -s /usr/lib/libXhp11.3 libXhp11.sl ln -s /usr/lib/libXi.3 libXi.sl ln -s /usr/lib/libXm.4 libXm.sl ln -s /usr/lib/libXp.2 libXp.sl ln -s /usr/lib/libXt.3 libXt.sl ln -s /usr/lib/libXtst.2 libXtst.sl

Note: Raw devices are supported with the Oracle database. Please note that when the EnterpriseOnePlatform Pack is used only operating system created disk “mount points” can be used. (Ex. /u01/…). Customers choosing to use raw devices must create the entire database including all necessary JD Edwards EnterpriseOne tablespaces using their chosen raw devices.

Oracle 9i R2: Note: Oracle 9i R2: HP-UX (PA-RISC) 11i (11.11) Install all the OS patches/patch bundles, mentioned in

Oracle 9i R2 Release Notes or superseding patches, patch bundles. As per the Release Notes and Oracle Metalink Note: 169706.1 the required OS patches to run Oracle 9i R2 on HP-UX (PA-RISC) 11i (11.11) are:

Note: Oracle 9i R2: HP-UX (PA-RISC) 11i (11.11) required O/S patches: Support Plus Bundle ‘December 2002 SP-0212’

Page 13 of 39


PHCO_24402 s/b PHCO_25569 PHCO_28427 s/b PHCO_29029 PHCO_31903 PHKL_25506 PHNE_27745 s/b PHNE_30580 PHNE_28568 s/b PHNE_30378 PHSS_26560 s/b PHSS_30966 PHSS_26946 PHSS_28849 PHSS_26263

PHSS_24638 JDK 1.3.1.02

Oracle 10g R1: Note: Oracle 10g R1: HP-UX (PA-RISC) 11i (11.11) Install all the OS patches/patch bundles, mentioned

in Oracle 10g R1 Release Notes or superseding patches, patch bundles. As per the Release Notes and Oracle Metalink Note: 169706.1 the required OS patches to run Oracle 10g R1 on HP-UX (PA-RISC) 11i (11.11) are:

Note: Oracle 10g R1: HP-UX (PA-RISC) 11i (11.11) required O/S patches: GOLDQPK11i, June 2003 or later GOLDAPPS11i GOLDBASE11i Jun03GQPK11i_Aux_Patch (Does not exist, see Oracle Metalink Bug: 3512068) PHCO_28123 PHKL_29198 PHNE_28476 s/b PHNE_29825 PHNE_28923 s/b PHSS_30049 PHSS_28871 PHSS_28880 PHCO_26331 s/b PHCO_27958 PHCO_29109 s/b PHCO_29960 PHKL_25468 s/b PHKL_30542 PHKL_25842 PHKL_25993 PHKL_25994 PHKL_25995 s/b PHKL_30541 PHKL_26468 s/b PHKL_27316 PHKL_28489 Note: Oracle 10g R1: HP-UX (PA-RISC) 11i v2 (11.23) In order to install Oracle 10g R1 on please use the -ignoreSysPreReqs flag with runInstaller Oracle 10g R2: Note: Oracle 10g R2: (10.2.0.3) Be sure to read and execute all of the appropriate Post Installation steps

after this patch is applied. Specifically on UNIX installations the changePerm.sh script

Page 14 of 39


Requirements for HP-UX (Itanium) Oracle Database

execution. Note: Oracle 10g R2: HP-UX (PA-RISC) 11i (11.11) Install all the OS patches/patch bundles, mentioned

in Oracle 10g R2 Release Notes or superseding patches, patch bundles. As per the Release Notes and Oracle Metalink Note: 169706.1 the required OS patches to run Oracle 10g R2 on HP-UX (PA-RISC) 11i (11.11) are:

Note: Oracle 10g R2: HP-UX (PA-RISC) 11i (11.11) required O/S patches: GOLDQPK11i, December 2004 or later PHNE_31097

PHSS_31221 PHSS_30970

Note: Oracle 10g R2: HP-UX (PA-RISC) 11iv2 (11.23) required O/S patches: PHSS_31849

PHSS_31852 Oracle Real Application Clusters (RAC) Option: Note: Refer to the Oracle Metalink Certification Matrices and Product Availability for platform specific

requirements that must be met when using the RAC option of Oracle Database. Note: When using Oracle RAC with JD Edwards EnterpriseOne the following Oracle parameter must be

set: max_commit_propagation_delay = 0



HP-UX (Itanium) 11i v2 (11.23)

Oracle Server Standard Edition One Oracle 10g R1 - 64 Bit 10.1.0.4 Oracle 10g R2 - 64 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 64 Bit 10.2.0.2 (Reference MetaLink Note 363721.1) Oracle 10g R2 - 64 Bit 10.2.0.3 Oracle Server Standard Edition Oracle 9i R2 - 64 Bit 9.2.0.4 Oracle 9i R2 - 64 Bit 9.2.0.5 Oracle 9i R2 - 64 Bit 9.2.0.6 (See MetaLink DocID 292946.1) Oracle 9i R2 - 64 Bit 9.2.0.7 (See MetaLink DocID 292946.1) (Apply Patch 4533592) Oracle 9i R2 - 64 Bit 9.2.0.8 (Apply Patch 5606601) Oracle 10g R1 - 64 Bit 10.1.0.4 Oracle 10g R2 - 64 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 64 Bit 10.2.0.2 (Reference MetaLink Note 363721.1) Oracle 10g R2 - 64 Bit 10.2.0.3 Oracle Server Enterprise Edition

Page 15 of 39


Oracle 9i R2 - 64 Bit 9.2.0.4 Oracle 9i R2 - 64 Bit 9.2.0.5 Oracle 9i R2 - 64 Bit 9.2.0.6 (See MetaLink DocID 292946.1) Oracle 9i R2 - 64 Bit 9.2.0.7 (See MetaLink DocID 292946.1) (Apply Patch 4533592) Oracle 9i R2 - 64 Bit 9.2.0.8 (Apply Patch 5606601) Oracle 10g R1 - 64 Bit 10.1.0.4 Oracle 10g R2 - 64 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 64 Bit 10.2.0.2 (Reference MetaLink Note 363721.1) Oracle 10g R2 - 64 Bit 10.2.0.3 Oracle Server RAC Option Oracle 10g R2 - 64 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 64 Bit 10.2.0.2 (Reference MetaLink Note 363721.1) Oracle 10g R2 - 64 Bit 10.2.0.3

General Information: Note: Please see specific Oracle version below for compatible Operating System Version Note: This is a 64 Bit product and 64 Bit hardware is absolutely required. Note: Refer to current release notes and Oracle Metalink Note: 169706.1 for necessary O/S Kernel settings. Note: Raw devices are supported with the Oracle database. Please note that when the EnterpriseOnePlatform


Oracle 9i R2: Note: Oracle 9i R2: HP-UX (Itanium) 11i v2 (11.23) Install all the OS patches/patch bundles, mentioned in

Oracle 9i R2 Release Notes or superseding patches, patch bundles. Oracle 10g R1 Note: Oracle 10g R1: HP-UX (Itanium) 11i v2 (11.23) Oracle 10g R2 Note: Oracle 10g R2: HP-UX (Itanium) 11i v2 (11.23) Note: Oracle 10g R2: (10.2.0.3) Be sure to read and execute all of the appropriate Post Installation steps

after this patch is applied. Specifically on UNIX installations the changePerm.sh script execution.




Page 16 of 39


Requirements for Windows Oracle Database



Windows 2003 Oracle Server Standard Edition One Oracle 10g R1 - 32 Bit 10.1.0.4 Oracle 10g R1 - 32 Bit 10.1.0.5 Oracle 10g R1 - 64 Bit – Not supported with JD Edwards EnterpriseOne Oracle 10g R2 - 32 Bit 10.2.0.1 Oracle 10g R2 - 32 Bit 10.2.0.2 Oracle 10g R2 - 64 Bit 10.2.0.2 Oracle 10g R2 - 32 Bit 10.2.0.3 Oracle 10g R2 - 64 Bit 10.2.0.3 Oracle Server Standard Edition Oracle 9i R2 - 32 Bit 9.2.0.4 Oracle 9i R2 - 32 Bit 9.2.0.5 Oracle 9i R2 - 32 Bit 9.2.0.6 Oracle 9i R2 - 32 Bit 9.2.0.7 Oracle 9i R2 - 32 Bit 9.2.0.8 Oracle 9i R2 - 64 Bit – Not supported with JD Edwards EnterpriseOne Oracle 10g R1 - 32 Bit 10.1.0.4 Oracle 10g R1 - 32 Bit 10.1.0.5 Oracle 10g R1 - 64 Bit – Not supported with JD Edwards EnterpriseOne Oracle 10g R2 - 32 Bit 10.2.0.1 Oracle 10g R2 - 32 Bit 10.2.0.2 Oracle 10g R2 - 64 Bit 10.2.0.2 Oracle 10g R2 - 32 Bit 10.2.0.3 Oracle 10g R2 - 64 Bit 10.2.0.3 Oracle Server Enterprise Edition Oracle 9i R2 - 32 Bit 9.2.0.4 Oracle 9i R2 - 32 Bit 9.2.0.5 Oracle 9i R2 - 32 Bit 9.2.0.6 Oracle 9i R2 - 32 Bit 9.2.0.7 Oracle 9i R2 - 32 Bit 9.2.0.8 Oracle 9i R2 - 64 Bit – Not supported with JD Edwards EnterpriseOne Oracle 10g R1 - 32 Bit 10.1.0.4 Oracle 10g R1 - 32 Bit 10.1.0.5 Oracle 10g R1 - 64 Bit – Not supported with JD Edwards EnterpriseOne Oracle 10g R2 - 32 Bit 10.2.0.1 Oracle 10g R2 - 32 Bit 10.2.0.2 Oracle 10g R2 - 64 Bit 10.2.0.2 Oracle 10g R2 - 32 Bit 10.2.0.3 Oracle 10g R2 - 64 Bit 10.2.0.3 Oracle Server RAC Option Oracle 9i R2 - 32 Bit 9.2.0.4

Page 17 of 39


Requirements for Solaris (UltraSPARC) Oracle Database

Oracle 9i R2 - 32 Bit 9.2.0.5 Oracle 9i R2 - 32 Bit 9.2.0.6 Oracle 9i R2 - 32 Bit 9.2.0.7 Oracle 9i R2 - 32 Bit 9.2.0.8 Oracle 9i R2 - 64 Bit – Not supported with JD Edwards EnterpriseOne Oracle 10g R1 - 32 Bit 10.1.0.4 Oracle 10g R1 - 32 Bit 10.1.0.5 Oracle 10g R1 - 64 Bit – Not supported with JD Edwards EnterpriseOne Oracle 10g R2 - 32 Bit 10.2.0.1 Oracle 10g R2 - 32 Bit 10.2.0.2 Oracle 10g R2 - 64 Bit 10.2.0.2 Oracle 10g R2 - 32 Bit 10.2.0.3 Oracle 10g R2 - 64 Bit 10.2.0.3

General Information: Note: Please see specific Oracle version below for compatible Operating System Version Oracle 9i R2: Note: Oracle 9i R2: Windows 2003 - 32 Bit is only supported. Oracle 10g R1 Note: Oracle 10g R1: Windows 2003 - 32 Bit is only supported. Oracle 10g R2 Note: Oracle 10g R2: Windows 2003 - 32 Bit is only supported with the 32-bit version of Oracle 10g R2. Note: Oracle 10g R2: Windows 2003 R2 – 32 Bit is only supported with the 32-bit version of Oracle 10g R2

with 10.2.0.2 Minimum Required. Note: Oracle 10g R2: Windows 2003 - 64 Bit is only supported with the 64-bit version of Oracle 10g R2 with

10.2.0.2 Minimum Required. Note: Oracle 10g R2: Windows 2003 R2 – 64 Bit is only supported with the 64-bit version of Oracle 10g R2

with 10.2.0.2 Minimum Required. Oracle Real Application Clusters (RAC) Option: Note: Refer to the Oracle Metalink Certification Matrices and Product Availability for platform specific





Solaris 8 – 64 Bit Solaris 9 – 64 Bit

Oracle Server Standard Edition One Oracle 10g R1 - 64 Bit 10.1.0.4

Page 18 of 39


Solaris 10 – 64 Bit Oracle 10g R1 - 64 Bit 10.1.0.5 Oracle 10g R2 - 64 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 64 Bit 10.2.0.2 (Apply Mandatory Patch 5117016) (Then Apply Patch 5087548) Oracle 10g R2 - 64 Bit 10.2.0.3 Oracle Server Standard Edition Oracle 9i R2 - 64 Bit 9.2.0.4 Oracle 9i R2 - 64 Bit 9.2.0.5 Oracle 9i R2 - 64 Bit 9.2.0.6 (See MetaLink DocID 292946.1) Oracle 9i R2 - 64 Bit 9.2.0.7 (See MetaLink DocID 292946.1) (Apply Patch 4533592) Oracle 9i R2 - 64 Bit 9.2.0.8 (Apply Patch 5606601) Oracle 10g R1 - 64 Bit 10.1.0.4 Oracle 10g R1 - 64 Bit 10.1.0.5 Oracle 10g R2 - 64 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 64 Bit 10.2.0.2 (Apply Mandatory Patch 5117016) (Then Apply Patch 5087548) Oracle 10g R2 - 64 Bit 10.2.0.3 Oracle Server Enterprise Edition Oracle 9i R2 - 64 Bit 9.2.0.4 Oracle 9i R2 - 64 Bit 9.2.0.5 Oracle 9i R2 - 64 Bit 9.2.0.6 (See MetaLink DocID 292946.1) Oracle 9i R2 - 64 Bit 9.2.0.7 (See MetaLink DocID 292946.1) (Apply Patch 4533592) Oracle 9i R2 - 64 Bit 9.2.0.8 (Apply Patch 5606601) Oracle 10g R1 - 64 Bit 10.1.0.4 Oracle 10g R1 - 64 Bit 10.1.0.5 Oracle 10g R2 - 64 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 64 Bit 10.2.0.2 (Apply Mandatory Patch 5117016) (Then Apply Patch 5087548) Oracle 10g R2 - 64 Bit 10.2.0.3 Oracle Server RAC Option Oracle 9i R2 - 64 Bit 9.2.0.4 Oracle 9i R2 - 64 Bit 9.2.0.5 Oracle 9i R2 - 64 Bit 9.2.0.6 (See MetaLink DocID 292946.1) Oracle 9i R2 - 64 Bit 9.2.0.7 (See MetaLink DocID 292946.1) (Apply Patch 4533592) Oracle 9i R2 - 64 Bit 9.2.0.8 (Apply Patch 5606601) Oracle 10g R1 - 64 Bit 10.1.0.4 Oracle 10g R1 - 64 Bit 10.1.0.5 Oracle 10g R2 - 64 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 64 Bit 10.2.0.2 (Apply Mandatory Patch 5117016) (Then Apply Patch 5087548) Oracle 10g R2 - 64 Bit 10.2.0.3

General Information: Note: Please see specific Oracle version below for compatible Operating System Version Note: This is a 64 Bit product and 64 Bit hardware is absolutely required. Note: Refer to current release notes and Oracle Metalink Note: 169706.1 for necessary O/S Kernel settings.

Page 19 of 39


Note: Raw devices are supported with the Oracle database. Please note that when the EnterpriseOnePlatform Pack is used only operating system created disk “mount points” can be used. (Ex. /u01/…). Customers choosing to use raw devices must create the entire database including all necessary JD Edwards EnterpriseOne tablespaces using their chosen raw devices.

Oracle 9i R2: Note: Oracle 9i R2: Solaris 8, 9 and 10 is supported. Note: Oracle 9i R2: Oracle 9i R2 supports Solaris 10 beginning with 9.2.0.5 Note: Oracle 9i R2: Solaris 8, 9 and 10 must be 64 Bit. Note: Oracle 9i R2: Starting with Oracle version 9.2.0.4, the Server product is always in 64 Bit and ships

with both a 32 Bit and 64 Bit client. If the Server product is 64 Bit then 64 Bit hardware (processors) is required.

Note: Oracle 9i R2: Oracle 9.2.0.4, 9.2.0.5, 9.2.0.6, 9.2.0.7 and 9.2.0.8 are 64 Bit products and 64 Bit hardware is absolutely required.

Note: Oracle 9i R2: Solaris 8 required patch: 108528-05 Note: Oracle 9i R2: Solaris 8, 9, and 10 required OS packages: SUNWarc,

SUNWbtool, SUNWhea, SUNWlibm, SUNWlibms, SUNWmfrun, SUNWsprot, SUNWtoo SUNWi1of and SUNWxwfnt (for Java) SUNWsprox (Not applicable to Solaris 10)

Note: Oracle 9i R2: Solaris 10: In order to install Oracle 9i R2 please use the -ignoreSysPreReqs flag with runInstaller Oracle 10g R1: Note: Oracle 10g R1: Solaris 8, 9 and 10 is supported Note: Oracle 10g R1: Solaris 10 supports Oracle 10g R1 beginning with 10.1.0.4 or 10.1.0.5 Note: Oracle 10g R1: Solaris 8, 9 and 10 must be 64 Bit. Note: Oracle 10g R1: Oracle 10g R1 is a 64 Bit product and 64 Bit hardware is absolutely required Note: Oracle 10g R1: Solaris 8 required patches: 108528-23

108652-66 108773-18 108921-16 108940-53 108987-13 108989-02 108993-18 109147-24 110386-03 111023-02 111111-03

Page 20 of 39


111308-03 111310-01 112396-02 111721-04 112003-03 112138-01

Note: Oracle 10g R1: Solaris 9 required patches: 112233-11

111722-04 Note: Oracle 10g R1: Solaris 8, 9, and 10 required OS packages: SUNWarc,

SUNWbtool, SUNWhea, SUNWlibm, SUNWlibms, SUNWmfrun, SUNWsprot, SUNWsprox (Not applicable to Solaris 10), SUNWtoo, SUNWxwfnt, SUNWi1cs, SUNWi15cs, SUNWi1of SUNWuiu8,SUNWulcf (if Oracle Bug:4025250 occurs)

Note: Oracle 10g R1: Solaris 10 Installation Information: 1. Execute runInstaller with the -ignoreSysPrereqs option. 2. Select 'Do not create a starter database' when installing Oracle 10g. 3. During installation, the warning message 'SUNWsprox package not installed' can be ignored.

Press Continue to resume the installation. 4. Download and install patch 4365826 from metalink.oracle.com. 5. Download and install 10.1.0.4, or 10.1.0.5 6. If you have an End User Solaris 10 distribution, install the SUNWuiu8 package prior to

installing the 10g client. Oracle 10g R2: Note: Oracle 10g R2: (10.2.0.3) Be sure to read and execute all of the appropriate Post Installation steps after

this patch is applied. Specifically on UNIX installations the changePerm.sh script execution.

Note: Bug 5117016 Solaris: Mandatory Patch for 10.2.0.2 on Solaris. Metalink Note 394933.1 gives a brief overview of this bug. (Apply Mandatory Patch 5117016) (Then Apply Patch 5087548)

Note: Oracle 10g R2: Solaris 8, 9 and 10 is supported Note: Oracle 10g R2: Solaris 8, 9 and 10 must be 64 Bit. Note: Oracle 10g R2: Oracle 10g R2 is a 64 Bit product and 64 Bit hardware is absolutely required Note: Oracle 10g R2: Solaris 8 required patches:

108528-23 108652-66 108773-18

Page 21 of 39


Requirements for AIX (IBM pSeries) Oracle Database

108921-16 108940-53 108987-13 108989-02 108993-45 109147-24 110386-03 111023-02 111111-03 111308-03 111310-01 112396-02 111721-04 112003-03 112138-01 112760-05

Note: Oracle 10g R2: Solaris 9 required patches: 112233-11

111722-04 115675-01

113471-08 115675-01 112760-05

Note: Oracle 10g R2: Solaris 8, 9, and 10 required OS packages: SUNWarc,

SUNWbtool, SUNWhea, SUNWlibm, SUNWlibms, SUNWmfrun, SUNWsprot, SUNWsprox (Not applicable to Solaris 10), SUNWtoo, SUNWxwfnt, SUNWi1cs, SUNWi15cs, SUNWi1of


requirements that must be met when using the RAC option of Oracle Database Note: When using Oracle RAC with JD Edwards EnterpriseOne the following Oracle parameter must be set:


Page 22 of 39




AIX 5.2 AIX 5.3 (see notes below for supported maintenance levels)

Oracle Server Standard Edition One Oracle 10g R1 - 64 Bit 10.1.0.4 Oracle 10g R1 - 64 Bit 10.1.0.5 Oracle 10g R2 - 64 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 64 Bit 10.2.0.2 (Apply Patch 5087548) Oracle 10g R2 - 64 Bit 10.2.0.3 Oracle Server Standard Edition Oracle 9i R2 - 64 Bit 9.2.0.4 Oracle 9i R2 - 64 Bit 9.2.0.5 Oracle 9i R2 - 64 Bit 9.2.0.6 (See MetaLink DocID 292946.1) Oracle 9i R2 - 64 Bit 9.2.0.7 (See MetaLink DocID 292946.1) (Apply Patch 4533592) Oracle 9i R2 - 64 Bit 9.2.0.8 (Apply Patch 5606601) Oracle 10g R1 - 64 Bit 10.1.0.4 Oracle 10g R1 - 64 Bit 10.1.0.5 Oracle 10g R2 - 64 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 64 Bit 10.2.0.2 (Apply Patch 5087548) Oracle 10g R2 - 64 Bit 10.2.0.3 Oracle Server Enterprise Edition Oracle 9i R2 - 64 Bit 9.2.0.4 Oracle 9i R2 - 64 Bit 9.2.0.5 Oracle 9i R2 - 64 Bit 9.2.0.6 (See MetaLink DocID 292946.1) Oracle 9i R2 - 64 Bit 9.2.0.7 (See MetaLink DocID 292946.1) (Apply Patch 4533592) Oracle 9i R2 - 64 Bit 9.2.0.8 (Apply Patch 5606601) Oracle 10g R1 - 64 Bit 10.1.0.4 Oracle 10g R1 - 64 Bit 10.1.0.5 Oracle 10g R2 - 64 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 64 Bit 10.2.0.2 (Apply Patch 5087548) Oracle 10g R2 - 64 Bit 10.2.0.3 Oracle Server RAC Option Oracle 9i R2 - 64 Bit 9.2.0.4 Oracle 9i R2 - 64 Bit 9.2.0.5 Oracle 9i R2 - 64 Bit 9.2.0.6 (See MetaLink DocID 292946.1) Oracle 9i R2 - 64 Bit 9.2.0.7 (See MetaLink DocID 292946.1) (Apply Patch 4533592) Oracle 9i R2 - 64 Bit 9.2.0.8 (Apply Patch 5606601) Oracle 10g R1 - 64 Bit 10.1.0.4 Oracle 10g R1 - 64 Bit 10.1.0.5 Oracle 10g R2 – 64 Bit 10.2.0.1 (Apply Patch 4516865) Oracle 10g R2 - 64 Bit 10.2.0.2 (Apply Patch 5087548) Oracle 10g R2 - 64 Bit 10.2.0.3

General Information:

Page 23 of 39


Note: All Oracle 9i Database and Oracle 10g Database customers who are running on AIX 5L V5.3 Technology Level 5 (TL 5300-05) must reference Metalink Note 282036.1 titled Minimum Software Versions and Patches Required to Support Oracle Products on IBM pSeries

Note: Please review Oracle Metalink Note: 169706.1 (Oracle RDBMS on (UNIX Platforms): Versions, Sizes, Requirements Quick Reference.

Note: Please review Oracle Metalink Note: 282036.1 (Minimum Software Versions and Patches Required to Support Oracle Products on IBM pSeries). This is a dynamic document so users should check back for any document updates before installing or updating software.

Note: Please see specific Oracle version below for compatible Operating System Version. Note: Raw devices are supported with the Oracle database. Please note that when the EnterpriseOnePlatform


Oracle 9i R2: Note: Oracle 9i R2: AIX 5.2 Maintenance level 1, or 5.3 is supported. Note: Oracle 9i R2: Starting with Oracle version 9.2.0.4, the Server product is always in 64 Bit and ships

with both a 32 Bit and 64 Bit client. If the Server product is 64 Bit then 64 Bit hardware (processors) is required.

Note: Oracle 9i R2: Oracle 9.2.0.4, 9.2.0.5, 9.2.0.6, 9.2.0.7 and 9.2.0.8 are 64 Bit products and 64 Bit hardware is absolutely required.

Note: Oracle 9i R2: AIX 5L required OS packages: bos.adt.base bos.adt.lib bos.adt.libm bos.perf.libperfstat bos.perf.perfstat Oracle 10g R1: Note: Oracle 10g R1: AIX 5.2 Maintenance level 1, or 5.3 is supported Note: Oracle 10g R1: This is a 64 Bit product and 64 Bit hardware is absolutely required. Note: Oracle 10g R1: AIX 5.2 required OS patches: IY43980 IY44810 IY45462 IY45707 IY46214 IY46605 IY48525 IY51801 IY59082 refer to Oracle Metalink Note 285158.1 Note: Oracle 10g R1: AIX 5.3 required OS patches: Refer to Oracle Metalink Note 282036.1 IY58143 IY59386 IY60930 Note: Oracle 10g R1: AIX 5L required OS packages: bos.adt.base bos.adt.lib

Page 24 of 39


Requirementsfor SQL Server 2005 Database

Support for SQL Server 2005 Services Pack 1 begins withEnterpriseOne Tools 8.96_F1

Support for SQL Server 2005 Services Pack 2 begins withEnterpriseOne Tools 8.96.2

bos.adt.libm bos.perf.libperfstat bos.perf.perfstat bos.perf.proctools Oracle 10g R2: Note: Oracle 10g R2: (10.2.0.3) Be sure to read and execute all of the appropriate Post Installation steps

after this patch is applied. Specifically on UNIX installations the changePerm.sh script execution.

Note: Oracle 10g R2: AIX 5.2 Maintenance level 4, or 5.3 Maintenance level 2 is supported Note: Oracle 10g R2: This is a 64 Bit product and 64 Bit hardware is absolutely required. Note: Oracle 10g R2: AIX 5.2 ML4 required OS patches: IY63133 IY64978 IY63366 IY64691 IY64737 IY65001 Note: Oracle 10g R2: AIX 5.3 ML2 required OS patches: IY58143 IY59386 IY60930 IY66513 IY70159 Note: Oracle 10g R2: AIX 5L required OS packages: bos.adt.base bos.adt.lib bos.adt.libm bos.perf.libperfstat bos.perf.perfstat bos.perf.proctools Oracle Real Application Clusters (RAC) Option: Note: Refer to the Oracle Metalink Certification Matrices and Product Availability for platform specific

requirements that must be met when using the RAC option of Oracle Database. Note: When using Oracle RAC with JD Edwards EnterpriseOne the following Oracle parameter must be

set: max_commit_propagation_delay = 0

Page 25 of 39




Optimization Guide

Upgrade Guide







JD Edwards EnterpriseOne Tools 8.9x MinimumTechnical Requirements for Deployment Server and Server Manager

Last Updated: 12/27/2007

Release Level: GA

This document describes the minimum technical requirementsfor deployment servers for the following EnterpriseOneTools versions:

EnterpriseOne Tools 8.9, SP1 and SP2 EnterpriseOne Tools 8.93 EnterpriseOne Tools 8.94 EnterpriseOne Tools 8.95 EnterpriseOne Tools 8.96 EnterpriseOne Tools 8.97

For additional information, please refer to the Hardware andSoftware Requirements section of the EnterpriseOne8.9x

Page 1 of 7

2/14/2008http://www.peoplesoft.com/corp/en/iou/platforms/enterpriseone.jsp?doc=ea2ddc3e2809469b88256ed80053d75e/$FILE/erp9-de...

Installation, Upgrade, or Update Guide.


Hardware Requirements Operating System Requirements Database Requirements ANSI C++ Compiler Requirements Miscellaneous Requirements

Information Common for all Software and Hardware for Deployment Server andServer Manager

Only thesoftware and platforms indicated in the charts below are supported.

SpecificVendor Hardware and Software Information is availableat EnterpriseOne 8.9x Informational Web SitesDocument.

Server Manager

Server Manager for JD Edwards EnterpriseOne is a web based application used to assist JD Edwards EnterpriseOne administrators with deploying tools releases,simplifying system configuration, and monitoring all EnterpriseOneservers. It is delivered with theJD Edwards EnterpriseOne Tools Release 8.97, andsupports the same JD Edwards EnterpriseOneapplication releases supported by Tools Release 8.97, which includes: 8.9,8.10, 8.11, 8.11 SP1, 8.12.

It is important to note that Server Managerfor JD Edwards EnterpriseOne is required to deployall tool releases starting with release 8.97. With the release of 8.97,Server Manager needs to be installed to deploy release 8.97 to your JD Edwards EnterpriseOne environments.

JD Edwards will support runningServer Manager on the Deployment Server.

Server Manager has the samerequirements as the Deployment Server with the following exceptions:

Page 2 of 7


Adobe Acrobat Reader is not required for Server Manager A compiler is not required for Server Manager


• Contact your specific hardware representativefor optimal system configurations.

• Sizing information is provided by the hardwarerepresentatives.

• It is critical to check with your hardwarevendor for sizing requirements when upgrading from XE or ERP 8 to EnterpriseOne 8.9 or later release.

• Oracle highly recommends that the server bededicated to EnterpriseOne 8.9x deployment (and optionally,Server Manager for 8.97).

Printer Support

• Non-DoubleByte: Post Script Language Level 2, PCL 5 or line printer.

• PCL 5 is only supported for non-DoubleByte customers.

• DoubleByte: Genuine Adobe Systems PostScript Language Level 2 Interpreter version 2015, orPostScript Language Level 3.

• EnterpriseOne uses CIDFont Technology. Support starts at Language Level 2 Interpreter 2015.

• It has been discovered that some third-partyinterpreters of PostScript Language Level 2 will not properly print CID-Font basedDoubleByte PostScript.


Note: Windows Server 2003 installedwith Windows terminal server remote administration as a default. To use thisserver as an EnterpriseOne Deployment server you mustadd the following to the deployment server jde.ini under the Debug section:

[Debug]

Page 3 of 7


OWDeveloper=TRUE

Windows Server 2003 SP1 is supported beginning with Enterprise One 8.9 – Tools Release 8.93_R1

Windows 2003 SP2 is supported beginning with Enterprise One 8.9 – Tools Release 8.96. Support for service packs is valid for Windows 2003 and Windows 2003 R2.

Windows Server 2003 R2 is supported beginning with Enterprise One 8.9 – Tools Release 8.93_R1

Note: JD Edwards EnterpriseOne Validationon Windows Server 2003 Editions

Oracle validates JD Edwards EnterpriseOneproducts with Microsoft Windows Server 2003 Standard Edition. This validationalso extends to Windows Server 2003 Enterprise Edition and Datacenter Edition.Customers who choose to implement EnterpriseOne onWindows Server 2003 Enterprise Edition or Datacenter Edition will receivesupport services according to their EnterpriseOneservices agreement.

Database Requirements

Database client connectivity

Refer to the JD Edwards EnterpriseOne 8.9x Database Software Minimum TechnicalRequirements document for client connectivity to EnterpriseOne8.9x databases. Unless otherwise noted the Client Database Component versionshould match the database software version, including jde.ini settings.

MSDE 2000 SP3 is included on SetupCD #1. It is installed during the deployment server installation. Instructionsfor installing MSDE are included in the EnterpriseOneInstall/Upgrade guides.

Note: Microsoft SQL Server 2000Client Tools are not required but recommended for local data viewing onWindows.

Note: Beginning with EnterpriseOne Tools 8.97 Microsoft SQL Server 2005 Expressis included instead of MSDE. SQL Server2005 Express is required for clients running Microsoft Vista.

Page 4 of 7


ANSI C++ CompilerRequirements

Configuration information for Visual StudioC++ .NET 2005 is included in the PackageManagement Guide 8.97.

8.9 SP2 Tools 8.93 Tools 8.94 / 8.95 / 8.96 Tools

8.97 Tools

8.9 Apps Compiler:


Compiler:


Compiler:


Compiler:


8.10 Apps N/A Compiler:


Compiler:


Compiler:


8.11 and 8.11 SP1 Apps

N/A N/A Compiler:


Compiler:


8.12 Apps N/A N/A Compiler:


Compiler:


or

Compiler:


Page 5 of 7


Note: Server Manager does not require a compiler.


RUNTIME LIBRARY DLLs

Prior to 8.97, these DLLs should be located in the Windowssystem32 directory. With 8.97 the DLLsneed to be located in the EnterpriseOne system/bin32directory. The required runtime DLLswill be installed as part of Enterprise One.

Miscellaneous Requirements

Adobe Acrobat Reader (Not required for Server Manager)


MFC71.dll

MFC71u.dll

Msvcp71.dll

Msvcr71.dll

atl80.dll

mfc80.dll

mfc80u.dll

mfcm80.dll

mfcm80u.dll

msvcm80.dll

msvcp80.dll

msvcr80.dll

Contact Us | Website Help | Site Index | Site Map

Page 6 of 7




Optimization Guide

Upgrade Guide







JD Edwards EnterpriseOne Tools 8.9x Minimum Technical Requirements for WebServers

11/21/2007 GA

The following informationdescribes the minimum hardware and software technical requirements forEnterpriseOne Tools 8.9, 8.93, 8.94, 8.95, 8.96and 8.97.

Information Common for Software and Hardware

Additional requirements apply in clustered server environments. Only the software and platforms indicated in the charts below are supported. Specific Vendor Hardware and Software Information available at EnterpriseOne 8.9 Informational Web Sites Document



Page 1 of 22

2/14/2008http://www.peoplesoft.com/corp/en/iou/platforms/enterpriseone.jsp?doc=5ae709197911a58088256ebe0078b46b/$FILE/erp9-w...

Requirements for Oracle Application Serverfor EnterpriseOne HTML Server Oracle Application Server with HP-UX (PA-RISC) Oracle ApplicationServer with Microsoft Windows (x86) 32-Bit Oracle ApplicationServer with AIX (IBM pSeries) Requirements for WebSphereApplication Server for EnterpriseOne HTML Server WebSphere Application Server with HP-UX (PA-RISC) WebSphere Application Server with HP-UX (Itanium) WebSphere Application Server with Microsoft Windows (x86)32-Bit WebSphere Application Server with Solaris (UltraSPARC) Application Server with AIX (IBM pSeries) WebSphere Application Server with OS/400 (IBM iSeries)

Requirements for Oracle Application Server forEnterpriseOne HTML Server

Support for Oracle ApplicationServer 10g R2 (10.1.2.0.0 and 10.1.2.0.2) starts with JD Edwards EnterpriseOneTools 8.95

Oracle Application Server10g R2 (10.1.2.0.0 and 10.1.2.0.2) are not supported with JD EdwardsEnterpriseOne Tools 8.97

Support for Oracle ApplicationServer 10g R3 (10.1.3.1.0) starts with JD Edwards EnterpriseOne Tools 8.97

Oracle Application Server with Linux (x86) 32-Bit Software Requirements

Red Hat Enterprise Linux AS/ES 3.0 Red Hat Enterprise Linux AS/ES 4.0 Oracle Enterprise Linux 4

Note: Red Hat Linux AS/ES 3.0 is supported with update 5 and support starts with 8.96 Note: Red Hat Linux AS/ES 3.0 is not supported with 8.97 Note: Red Hat Linux AS/ES 4.0 is supported with update 2 and support starts with 8.96 Note: Oracle Enterprise Linux 4 is supported with update 4 and support starts with 8.96.2

Oracle Application Server Requirements

Oracle Application Server 10g R2 (10.1.2.0.0)

SEE NOTE 1 BELOW


SEE NOTE 2 BELOW

Page 2 of 22



SEE NOTE 4 BELOW

HTTP Server (Web Server) Requirements

Oracle HTTP Server with Oracle Application Server 10g R2 (10.1.2.0.0)

Note: Only the HTTP Server that is included with Oracle Application Server is supported.





Oracle Web Cache

Oracle Web Cache 10.1.2.0.2 Note: Manage both Oracle Application Server 10.1.2.0.2 and 10.1.3.1.0

Note: Oracle Web Cache is not part of Oracle Application Server 10.1.3.1.0

JDBC Driver Requirements

DB2 UDB V8.1/ V8.2/V9.1 (Type 2) SEE NOTE 3 BELOW

Oracle 9i (9.2.0.x) and 10g SEE NOTE 3 BELOW

iSeries Toolbox for Java (5722-JC1) SEE NOTE 3 BELOW

Microsoft SQL Server JDBC driver SEE NOTE 3 BELOW

Oracle Application Server with HP-UX (PA-RISC) Software Requirements

HP-UX 11i (11.11) HP-UX 11i v2 (11.23)



SEE NOTE 1 BELOW


SEE NOTE 2 BELOW

Page 3 of 22



SEE NOTE 4 BELOW








Oracle Web Cache




DB2 UDB V8.1 / V8.2 / V9.1 (Type 2) SEE NOTE 3 BELOW




Oracle Application Server with HP-UX (Itanium) Software Requirements

HP-UX 11i v2 (11.23)



SEE NOTE 2 BELOW


SEE NOTE 4 BELOW


Page 4 of 22






Oracle Web Cache




DB2 UDB V8.1 / V8.2 / V9.1 (Universal Type 2)

SEE NOTE 3 BELOW




Oracle Application Server with Microsoft Windows (x86) 32-Bit Software Requirements

Windows Server 2003 Note: Oracle validates JD Edwards EnterpriseOne products with Microsoft Windows Server 2003 Standard Edition. This validation also extends to Windows Server 200Enterprise Edition and Datacenter Edition. Customers who choose to implement EnterpriseOne on Windows Server 2003 Enterprise Edition or Datacenter Edition will receive support services according to their EnterpriseOne services agreement.



SEE NOTE 1 BELOW


SEE NOTE 2 BELOW


SEE NOTE 4 BELOW


Page 5 of 22








Oracle Web Cache








Client Workstation Requirements

EnterpriseOne 8.9x Generation Machine

Note: The client workstation is required for generating Java objects (Serialized Objects)Note: The EnterpriseOne client system must match the Enterprise Server system. Note: WebSphere Express is not supported for generating EnterpriseOne serialized objects to an Oracle

Application Server.

Oracle Application Server with Solaris (UltraSPARC) Software Requirements

Solaris 8 Solaris 9 Solaris 10



SEE NOTE 1 BELOW


SEE NOTE 2 BELOW

Oracle Application Server SEE NOTE 4 BELOW

Page 6 of 22


10g R3 (10.1.3.1.0)








Oracle Web Cache




DB2 UDB V8.1 / V8.2 (Type 2) SEE NOTE 3 BELOW




Oracle Application Server with AIX (IBM pSeries) Software Requirements

AIX 5L (5.2) AIX 5L (5.3)

Note: AIX 5L support starts with Oracle Application Server 10g R2 10.1.2.0.2 Note: For AIX 5L Version 5.2

· Maintenance Level 04 · APAR 76141 is required

Note: For AIX 5L Version 5.3 · Maintenance Level 02 · APAR 76140 is required



Note: Not supported on AIX platform

Oracle Application Server SEE NOTE 2 BELOW

Page 7 of 22


10g R2 (10.1.2.0.2) The following manual steps are required for AIX 5L with Oracle Application Server 10g R2 (10.1.2.0.2):

· Download and apply the latest 32-bit JDK from IBM · Download a JDK install script and a Readme file from Oracle Patch 4432933 · Follow the instructions from Oracle Metalink Doc ID 365725.1 to edit the emctl

and emd.properties scripts · For EnterpriseOne Transaction Server applications, set Max Heap Size to 1024MB


SEE NOTE 4 BELOW Note: For AIX 5L Version 5.2

· Maintenance Level 07 · APAR 76141 is required

Note: For AIX 5L Version 5.3 · Maintenance Level 03 - APAR 76140 is required






Oracle Web Cache








NOTE 1:

Note: Oracle Application Server 10g R2 (10.1.2.0.0 ) is not supported with JD Edwards EnterpriseOne Tools 8.97

Page 8 of 22


Please note that Oracle Application Server 10g R2 Java and Standard Editions (version 10.1.2.0.0) are supported with a specificpatch that is downloadable from Oracle Metalink web site (Please refer to Informational Website for link to metalink). Please refeto the instructions below on what fixes are required. The following patch is required to be installed, after Oracle Application Server 10g R2 (10.1.2.0.0) has been installed.

Patch p2617419 for Oracle Universal Installer is required and need to be applied before applying following patches. Patch P3412804 for J2EE Containers is required. Patch P3636847 for JDBC patch is required if backend database is an Oracle Database. Patch is for Oracle JDBC Driver

10.1.0.3 Step to install Oracle Application Server 10g R2 (10.1.2.0.0) along with the patch. (Detail installation instructions along with instructions for applying patch are documented in the “EnterpriseOne Tools 8.95 HTML Server Installation for [Windows/Unix] – Based Systems and Oracle Application Server”)

Install Oracle Application Server 10g R2(10.1.2.0.0). Install Patch P2617419 for Oracle Universal Installer Install Patch P3412804 for J2EE Containers If you are using Oracle Database as a backend database, please also install P3636847. This is a patch for JDBC 10.1.0.3

NOTE 2:

Note: Oracle Application Server 10g R2 (10.1.2.0.2 ) is not supported with JD Edwards EnterpriseOne Tools 8.97 The following patch is required after Oracle Application Server 10g R2 (10.1.2.0.2) has been installed.

Oracle JDBC Driver 10.1.0.5.0 is required.

Step to install Oracle Application Server 10g R2 (10.1.2.0.2) along with the patch. (Detail installation instructions along with instructions for applying patch are documented in the Guides)

Install Oracle Application Server 10g R2 (10.1.2.0.2). Replace the Oracle 10.1.0.4.2 JDBC Driver with the Oracle JDBC Driver 10.1.0.5.0

Note: There is no upgrade path between 10.1.2.0.0 and 10.1.2.0.2 products.

NOTE 3: Note: Please refer to the appropriate Database Server MTR for more details. Note: Always use the JDBC drivers that match your database version. Note: The JDBC drivers must be obtained from Database or a third party vendor

Applicable for Oracle 10g R2 JDBC Driver:

Oracle JDBC driver patch p4711863 is required for Oracle Application Server 10g R3 (10.1.3.1.0). This patch was built for database release 10.2.0.2, and can only be applied to this release. At this time there is no patch for database release 10.2.0.3, however, it has been verified that JDBC 10.2.0.2 is compatible with JDBC 10.2.0.3.

Page 9 of 22


Note: Support for Oracle Application Server 10g R3 (10.1.3.1.0) starts with JD Edwards EnterpriseOne Tools 8.97

Note: Oracle Application Server 10g R2 (10.1.2.0.0 and 10.1.2.0.2) are not supported with JD Edwards EnterpriseOne Tools 8.97

Note: Oracle Application Server 10g R3 (10.1.3.1.0) is not a full product release. It contains Oracle SOA Suite and OC4J. There are no Web Cache, Infrastructand Portal for 10.1.3.1.0. You need the components from 10g R2 (10.1.2.0.2) to work with 10.1.3.1.0. The following patch is required after Oracle Application Server 10g R3 (10.1.3.1.0) has been installed.

Patch p5669155 – MUST apply first Patch p5555875 - Correct http server problems.

Additional patches for the following platform: For HP-UX PA-RISC platform, MUST apply the latest patch p2617419 prior to install patch p5555875. For AIX 5L platform, apply the latest IBM JDK.

Step to install Oracle Application Server 10g R3 (10.1.3.1.0) along with the patch. (Detail installation instructions along with

Applicable for iSeries JDBC Driver:

The iSeries Toolbox for Java contains the JT400.jar file which can be used for non-iSeries platforms to access iSeries databases such as Windows platform Web Server accessing OS/400 database. The EnterpriseOne iSeries database is onlsupported in the configuration where it is accessed as a remote database from EnterpriseOne HTML Server running on Oracle Application Server 10g on any supported non-iSeries platform.

Applicable for DB2 UDB V8.1, V8.2 and V9.1 JDBC Driver:

Only DB2 UDB Type 2 driver is supported. This driver is part of the client or database installation. DYNAMIC=1 is required in the [Common] section of db2cli.ini file. Starting with EnterpriseOne Tools release 8.93 B1, LOBCACHESIZE=2500000 is also required in the [Common] section of

db2cli.ini file. To Configure DB2/UDB with Oracle Application Server. Please refer to HTML Server Guides.

For Itanium Platform, use DB2 UDB Universal Type 2 driver, db2jcc.jar, for Oracle Application Server. - Locate the Universal Type 2 driver, db2jcc.jar, and the license file, db2jcc_license_cu.jar from <DB2DIR>/java directory- Copy the db2jcc.jar and db2jcc_license_cu.jar files to the applib directory of the JAS instance - Modify the jdbj.ini to use the Universal Type 2 driver

[JDBj-JDBC DRIVERS] UDB=com.ibm.db2.jcc.DB2Driver Applicable for Microsoft SQL Server JDBC Driver:

JDBC drivers can be obtained directly from Microsoft. - Microsoft SQL 2005 JDBC driver support starts with EnterpriseOne 8.96_F1 and Oracle Application Server 10.1.2.0.2- Microsoft SQL Server 2005 JDBC driver is supported on both SQL Server 2000 and SQL Server 2005 databases. - If the SQL Server 2005 database is configured, the Microsoft SQL server 2005 JDBC driver must be used. - The EnterpriseOne Tools release on the HTML Server must match the Tools release on the Enterprise Server.

Page 10 of 22


instructions for applying patch are documented in the Readme file for each patch) Install Oracle Application Server 10g R3 (10.1.3.1.0). Apply patch p5669155

For HP-UX PA-RISC, apply p2617419 For AIX 5L, download and apply the latest IBM JDK, follow the Oracle metalink doc # 396096.1 on how to replace the default jdk.

Apply patch p5555875

Note: There is no upgrade path between 10.1.2.0.0, 10.1.2.0.2 and 10.1.3.1.0 products.

Page 11 of 22




Optimization Guide

Upgrade Guide







JD Edwards EnterpriseOne Tools 8.9x MinimumTechnical Requirements for Clients

Last Updated: 12

ReleaseLevel: GA

This document describes the minimum technical requirementsfor clients for the following EnterpriseOne Toolsversions:

• EnterpriseOne Tools8.9, SP1 and SP2

• EnterpriseOne Tools8.93






Page 1 of 12

2/14/2008http://www.peoplesoft.com/corp/en/iou/platforms/enterpriseone.jsp?doc=f4f3dd36b1d537c688256ebe00253238/$FILE/erp9-wi...

• Information Common for all Clients

• Web Client

• Windows Client

• DevelopmentClient

Information Common for All Clients

Only the software and platforms indicated in the chartsbelow are supported.

Specific vendor hardware and software information isavailable in the EnterpriseOne 8.9x Informational WebSites document.

System Restore on Windows XP should beturned off on Enterprise One Windows and Development Clients to allow Enterprise One to function correctly.

Turn off SystemRestore

To turn off System Restore, follow these steps:

1. Click Start,right-click My Computer, and then click Properties.

2. Click the SystemRestore tab.

3. Select the Turn off System Restore check box (or the Turn off System Restore on all drives check box), andthen click OK.

4. Click Yeswhen you receive the prompt to the turn off System Restore.

Turn on System Restore

To turn on System Restore, follow these steps:

1. Click Start,right-click My Computer, and then click Properties.

2. Click the SystemRestore tab.

3. Clear the Turn off System Restore check box (or the Turn off System Restore on all drives check box), andthen

Page 2 of 12


click OK.

Web Client

Note:Starting with JDEdwards application 8.11, the webclient is required for running business applications (the Windows client issupported only for running EnterpriseOneadministrative applications starting with 8.11). The Windows client issupported with application releases 8.9 and 8.10 for administrative andbusiness applications.


• Contact your specific hardware representativefor optimal system configuration for the operating system on which the browserruns.

• It is critical to check with your hardwarevendor for sizing requirements when upgrading from XE or ERP 8 to EnterpriseOne release 8.9 or later.

One of the primary factors that effects the performance ofthe Web client is the number of cells to be rendered in the grid withininteractive applications. Ifunsatisfactory performance is experienced while rendering the grid, performanceof the Web client can usually be improved by:

1. Reducing the number of columns in the grid by using custom views 2. Increasing the RAM on the Web client 3. Increasing the CPU on the Web client

Operating System and Web Browser Requirements

The following table lists the supported operating system/Web browsercombinations by EnterpriseOne Tools release. Onlycombinations listed in this table are supported.

Operating System Browser 8.9 SP1 8.9 SP2 8.93 8.94, 8.95, 8.96

8.97

Windows XP Professional SP1

Note: Windows XP Home Edition is not supported.

Internet Explorer 6

See Internet Explorer Notes below.

X X X X X

Windows XP Professional SP2 Internet Explorer 6 X X X

Page 3 of 12


InternetExplorer Notes



Windows XP Professional SP2 excluding Home Edition. Windows Vista Business, Windows Vista Ultimate, and Windows Vista Enterprise Editions.

Internet Explorer 7


Support begins with

8.96.1.0

X

Windows XP Professional SP2 excluding Home Edition. Windows Vista Business, Windows Vista Ultimate, and Windows Vista Enterprise Editions.

Firefox 2.0

See Firefox Notes below.

X

Mac OS X Safari 1.2

See Safari Notes below.

X

Mac OS X Firefox 2.0


X

Red Hat Enterprise Linux WS 2.1 Mozilla 1.6, 1.7

See Mozilla Notes below.

X

Red Hat Enterprise Linux WS 4.0 Firefox 2.0


X

• Always allow session cookies.

• Java permissions should be set to medium or lower.

• Check for newer versions of stored pages.

Page 4 of 12


Firefox Notes

Safari Notes

MozillaNotes

The following are known limitations using Firefox 2.0:

• Firefox cannot be used as a browser for SameTime and QuickPlace.

• OLE and RTF media objects cannot be viewed as embedded objects.

• Import and export with Microsoft Excel and Word is not supported.

Other behavioral differences have been observed using Firefox.

The following are known limitations using Safari 1.2:

• Safari cannot be used as a browser for SameTime and QuickPlace.



Other behavioral differences have been observed using Safari.

The following are known limitations using Mozilla:



• Lean manufacture control is not available.

• Arabic language right to left is not available.

Page 5 of 12



WindowsClient

Note: Starting with JDEdwards application 8.11, the web client is required forrunning business applications (the Windows client is supported only for runningEnterpriseOne administrative applications startingwith 8.11). The Windows client is supported with applicationreleases 8.9 and 8.10 for administrative and business applications.

HardwareRequirements

Other behavioral differences have been observed using Mozilla.

• Adobe Acrobat Reader

• Freedom Scientific JAWS 4.5. The Web client supports accessibility for the seeing impaired through JAWS. JAWS 4.5 is the only supported level and is only supported on Internet Explorer.

• Microsoft Office 2003 is optional.

• Microsoft Office 2007 is optional. Microsoft Office 2007 is supported beginning with JD Edwards EnterpriseOne Tools 8.96.2. Note that Microsoft Office 2007 has changed some default file extensions. For example, the default extension for Excel files has changed from .xls to .xlsx. Therefore, when exporting to Excel 2007 files, users might have to change the target file name to *.* to see all available files.

Specification Recommendation

CPU Minimum required by Microsoft for the operating system

RAM 156 MB above the requirements for the operating system

Hard Drive 8 GB for system code and initial path code. 6 GB for each additional path code. This is in addition to any other system requirements.

Printer Support Non-double-byte: Post Script Language Level 2, PCL 5 or line printer.

Double-byte: Genuine Adobe Systems PostScript Language Level 2 Interpreter version 2015, or PostScript Language Level 3.

Page 6 of 12



Note: The EnterpriseOne Windowsclient must be installed with “Run as Administrator” on Windows Vista.

Note: The EnterpriseOne Windowsclient must be run with “Run as Administrator” on Windows Vista.


Database ClientConnectivity

Refer to the EnterpriseOne 8.9xDatabase Software Minimum Technical Requirements document for clientconnectivity to EnterpriseOne 8.9x databases. Unlessotherwise noted the Client Database Component version should match the databasesoftware version, including jde.ini settings.

Microsoft Data AccessComponents (MDAC)

Oracle suggests that all MDAC levels be the same across allclient workstations and servers.

PCL 5 is only supported for non-double-byte customers.

EnterpriseOne uses CID Font Technology. Support starts at Language Level 2 Interpreter 2015.

Note: It has been discovered that some third-party interpreters of PostScript Language Level 2 will not properly print CID-Font based double-byte PostScript.

Operating System 8.9 SP1 8.9 SP2 8.93 8.94, 8.95, 8.96 8.97 Windows XP Professional SP1


X X X X X

Windows XP Professional SP2


X X X

Windows Vista (Business, Ultimate, and Enterprise Editions)

X

Page 7 of 12


Updates to the installed software may change the MDAC levelautomatically.

Additional MDAC information and reference web sites can befound on the Informational Web Sites for EnterpriseOne8.9x document.

MSDE 2000 SP3

MSDE 2000 SP3 is installed during the client workstation installations.Instructions for installing MSDE are included in the EnterpriseOneInstall/Upgrade guides.

Microsoft SQL Server2005 Express

Beginning with EnterpriseOne Tools8.97 Microsoft SQL Server 2005 Express is included instead of MSDE. SQL Server2005 Express is required for clients running Microsoft Windows Vista. An error message will result when MSDEpackages are deployed to clients running Microsoft Windows Vista.


DevelopmentClient


The hardware requirementsfor the development client are the same as the Windows client.


The operatingsystem requirements for the development client are the same as the Windowsclient.

• Adobe Acrobat Reader

• With Windows XP Professional SP2 the System Restore feature must be turned off.

• Microsoft Office 2003 is optional.

• Microsoft Office 2007 is optional. Microsoft Office 2007 is supported beginning with JD Edwards EnterpriseOne Tools 8.96.2. Note that Microsoft Office 2007 has changed some default file extensions. For example, the default extension for Excel files has changed from .xls to .xlsx. Therefore, when exporting to Excel 2007 files, users might have to change the target file name to *.* to see all available files.

Page 8 of 12



The database requirementsfor the development client are the same as he Windows client.

ANSI C and C++ Compiler Requirements

8.9 SP2 Tools 8.93 Tools 8.94 Tools 8.95 / 8.96 Tools 8.97 Tools 8.9 Apps Compiler:


Compiler:


Compiler:

Visual Studio C++ 6.0 (SP5 or SP6) and

RTL 7.1

Compiler:


RTL 7.1

Compiler:


RTL 7.1 8.10 Apps N/A Compiler:


Compiler:


RTL 7.1

Compiler:


RTL 7.1

Compiler:


RTL 7.1 8.11 and 8.11 SP1 Apps

N/A N/A Compiler:


Compiler:


Compiler:


8.12 Apps N/A N/A N/A Compiler:


Compiler:


OR

Compiler:


Page 9 of 12


Note: Visual Studio C++ .NET 2005 is the only supported compiler onMicrosoft Windows Vista. Configuration information for Visual StudioC++ .NET 2005 is included in the PackageManagement Guide 8.97.


RUNTIME LIBRARY DLLs

Prior to 8.97, theseDLLs should be located in the Windows system32 directory. With 8.97 the DLLs need to be located in the EnterpriseOne system/bin32 directory. The required runtime DLLs will be installedas part of EnterpriseOne.

EnterpriseOne 8.9 and 8.10 Apps donot support the Visual Studio C++ .NET 2003 compiler. In order to install VC6.0 the user will need to acquire and license the Visual Studio .NET softwarefrom Microsoft. Install the .NET version then follow the downgrade instructionsfrom the Microsoft web site referenced in the EnterpriseOne8.9 Informational Web Sites Document.


MFC71.dll

MFC71u.dll

Msvcp71.dll

Msvcr71.dll

atl80.dll

mfc80.dll

mfc80u.dll

mfcm80.dll

mfcm80u.dll

msvcm80.dll

msvcp80.dll

msvcr80.dll

Page 10 of 12


Web Application Server Requirements

Beginning with EnterpriseOne Tools8.9 SP2 the development tools allow a developer to preview Web applications onthe local developer workstation. This feature requires that a Web applicationserver is installed on the developer workstation. Refer to the EnterpriseOne Install/Upgrade guides for instructions oninstalling the development client.

The Web application servers listed below are supported. OC4J 10g Standalone

• OC4J Standalone (10.1.2.x). Support for OC4JStandalone (10.1.2..x) begins with EnterpriseOneTools 8.95. In order to use the OC4J Standalone (10.1.2.x) installation,a Java2 Standard Edition (J2SE) SDK version 1.4 must be available on theDeployment Server.

• OC4J Standalone (10.1.3.2). Support for Oracle OC4JStandalone 10.1.3.2 begins with EnterpriseOne Tools8.97. Support for the Oracle Application Server with Microsoft WindowsVista begins with Oracle Application Server 10g R3 (10.1.3.1). In orderto use the OC4J Standalone (10.1.3.1) installation, a Java2 Standard Edition(J2SE) SDK version 5.0 (JDK 1.5) must be available on the Deployment Server.

For convenience of installation, the supported version of StandaloneOC4J and JDK are included as part of the development client installationprocess.

IBM WebSphereApplication Server Express

• IBM WebSphereApplication Server Express 6.0. Supportfor WebSphere Application Server Express 6.0 beginswith EnterpriseOne Tools 8.96

• IBM WebSphereApplication Server Express 6.1. Supportfor WebSphere Application Server Express 6.1 beginswith EnterpriseOne Tools 8.97. Support for the WebSphereApplication Server Express with Microsoft Windows Vista begins with WebSphere Application Server Express 6.1.

WebSphere Application ServerExpress must be installed manually before installing the development client.The WebSphere Application Server Express CD isincluded with the EnterpriseOne Technology FoundationCDs.


The miscellaneousrequirements for the development client are the same as for the Windowsclient.

Contact Us | Website Help | Site Index | Site Map Legal Terms | Privacy Policy

Page 11 of 12




Optimization Guide

Upgrade Guide







J.D. Edwards EnterpriseOne 8.9x Minimum Technical Requirements Disk SpaceRequirement Tables

Last Updated: 9/14/2005

Release Level: GA


• Enterprise ServerDisk Space Requirements Windows 2003 and UNIX Only

• SQL Server DatabaseWindows 2003 Only

• AS400 Data Server (OracleDatabase) AS400 Only

• AS400 EnterpriseServer Disk Space Requirements AS400 Only

•<ΣΠΑΝΣΤΨΛΕ=∋ΦΟΝΤ:7.0ΠΤ Νεω Ρομαν?? ?Τιμεσ> LanguageInstallation Disk Space Requirements All Platforms

Deployment Server Disk Space Requirements AllPlatforms

Description Size

Page 1 of 7

2/14/2008http://www.peoplesoft.com/corp/en/iou/platforms/enterpriseone.jsp?doc=920d0e6e9c287d1188256ebe00287b61/$FILE/ERP9D...

*Each path code size includes space for two full packages. Afull package requires approximately 4.1GB

EnterpriseServer Disk Space Requirements Windows 2003 and UNIX Only

Oracle Database Windows 2003 and UNIX Only

Planner and other objects 6GB Database Exports: Oracle 2.42GB SQL Server 2.14GB DB2 UDB 2.23GB Prototype path code 8.9GB* Development path code 8.9GB* Pristine path code 8.9GB* Production path code 8.9GB* Addtional path code 8.9GB*

Description SizeSystem Directory 108MB Pristine path code directory and corresponding package

3.4GB

Production path code directory and corresponding package

3.4GB

Prototype path code directory and corresponding package

3.4GB

Development path code directory and corresponding package

3.4GB

Additional path code directory and corresponding package

3.4GB

Description SizeSystem Tables (System B9) 300MB Server Map Tables (machine name B9 Server Map) 20MB Object Librarian Tables (Object Librarian B9) 210MB Data Dictionary Tables (Data Dictionary B9) 325MB Production Data (Business Data Prod) 850MB Pristine Data (Business Data JDE) 850MB Prototype Data (Business Data CRP) 850MB Test Data (Business Data TEST) 850MB Production Control Tables (Control Tables Prod) 400MB

Page 2 of 7


SQL Server Database Windows 2003 Only

Pristine Control Tables 750MB Prototype Control Tables (Control Tables CRP) 400MB Test Control Tables (Control Tables Test) 500MB Central Objects for Production Path Code (Central Objects PD9)

5.15GB

Central Objects for Pristine Path Code (Central Objects JD9)

5.15GB

Central Objects for Prototype Path Code (Central Objects PY9)

5.15GB

Central objects for development path code (Central Objects DV9)

5.15GB

Central objects for additional path code 5.1GB

Description SizeJDE9 (System B9, Object Librarian B9, Data Dictionary B9, machine name B9 Server Map (where machine name is the enterprise server))

530 MB

JDE_PD9 (Central Objects PD9, Versions PD9) 3.7GB

JDE_PRODUCTION (Business Data PROD, Control Tables Prod)

1.3GB

JDE_PY9 (Central Objects PY9, Versions PY9) 3.7GB

JDE_CRP (Business Data CRP, Control Tables CRP) 1.3GB

JDE_JD9 (Central Objects JD9, Versions JD9) 3.7GB

JDE_PRISTINE (Business Data JDE, Control Tables JDE)

1.3GB

JDE_DV9 (Central Objects DV9, Versions DV9) 3.7GB

JDE_DEVELOPMENT (Business Data Test, Control Tables Test)

1.3GB

Page 3 of 7


Language Installation Disk Space RequirementsAll Platforms

Description SizeXXSYS* library (server objects) 140MB OL9 library (Object Librarian) 47MB DD9 library (Data Dictionary) 120MB PD9 library (Prod Central Objects) 4.5GB JD9 library (Prist Central Objects 4.5GB PY9 library (CRP Central Objects) 4.5GB DV9 library (Dev Central Objects 4.5GB Additional CO Libraries 4.5GB SYS9 library (System) 180MB PRODDTA library (Business Data) 365MB PRISTDTA library (Business Data) 365MB CRPDTA library (Business Data) 365MB TESTDTA library(Business Data) 365MB PRODCTL library(Control Tables) 67MB PRISTCTL library (Control Tables) 67MB CRPCTL library (Control Tables) 67MB TESTCTL library (Control Tables) 67MB SVM9 library (Server Map) 3MB

Description SizeDeployment Server (+) 500MB Client Workstation (+) 200MB Database Central objects for production path code (Central Objects PD9)

(+) 600MB

Central objects for pristine path code (Central Objects JD9)

(+) 600MB

Central objects for prototype path code (Central Objects PY9)

(+) 600MB

Central objects for development path code (Central Objects DV9)

(+) 600MB

Page 6 of 7


JD Edwards EnterpriseOne Tools 8.9x Minimum Technical ... MTRs.pdf · • Enterprise (logic and...

Documents

Transcript of JD Edwards EnterpriseOne Tools 8.9x Minimum Technical ... MTRs.pdf · • Enterprise (logic and...