J.Byrne 20151. Sofa Table Course work 12/13 J.Byrne 20152.
-
Upload
robert-cummings -
Category
Documents
-
view
212 -
download
0
Transcript of J.Byrne 20151. Sofa Table Course work 12/13 J.Byrne 20152.
J.Byrne 2015 1
Sofa TableCourse work 12/13
J.Byrne 2015 2
Sofa TableCourse work 12/13
J.Byrne 2015 3
Q 2. Produce an orthographic drawing of the Sofa Table shown in the drawing provided at a scale of 1:5. Include eight dimensions. (5%)
Q 3. Produce an Isometric drawing of the Sofa Table shown in the drawing provided at a scale of 1:5. Do not dimension. (5%)
Specifications: The Top has 70mm cross banding all
around with an ellipse size Major 500mm, Minor 260mm centred on the table.
The ellipse is divided in 30° segments. The bottom rail is 20mm x 20mm and is
flush with legs. The Top has a 15mm round moulding all around.
Sofa TableCourse work 12/13
J.Byrne 2015 4
The shaped Pull Rail is detailed as below in Fig 1.
Draw Orthographic
Each View should fit inside a box equal to overall sizeEach view relates to another viewDraw height line and keep as dimension line using Tee square bring each height across to both drawings
J.Byrne 2015 5
Draw Orthographic
Put light box around ellipse
Put light box around quadrant
J.Byrne 2015 6
Draw isometric box overall size of Table 1040mm x 500mm x 500mm at the correct scale
J.Byrne 2015 7
Divide quadrant into equal lines
Divide quarter of circle into 5mm spaces Divide quarter of ellipse into 5mm spaces
J.Byrne 2015 8
Repeat steps on isometric
Number each division and take measurements from plan and mark off on isometric
J.Byrne 2015 9
Complete drawing
Draw in leg frame taking all measurements from elevation and end view
J.Byrne 2015 10
Sofa TableCourse work 12/13
J.Byrne 2015 11
Sofa Table Course work 12/13
Q 2. Produce an orthographic drawing of the Sofa Table shown in the drawing
provided at a scale of 1:5. Include eight dimensions. (5%)
Q 3. Produce an Isometric drawing of the Sofa Table shown in the drawing
provided at a scale of 1:5. Do not dimension. (5%)
Specifications: The Top has 70mm cross banding all around with an ellipse size Major
500mm, Minor 260mm centred on the table. The ellipse is divided in 30° segments. Fig 2 The bottom rail is 20mm x 20mm and is flush with legs. The Top has a 15mm round moulding all around. The shaped Pull Rail is detailed as below in Fig 1
J.Byrne 2015 12