JAVA P rogramming B asic
description
Transcript of JAVA P rogramming B asic
JAVA Programming Basic
Chapter 2
Chapter 2
2.0 Java Programming Basic 2.1 Structured language vs OOP language 2.2 Introduction to JAVA Application 2.3 Data Types 2.4 Control Structures 2.5 Array 2.6 Packages
Structured language vs OOP language
A programming language where the program may be broken down into blocks or procedures which can be written without detailed knowledge of the inner workings of other blocks, thus allowing a top-down design approach.
The use of a class of programming languages and techniques based on the concept of an “object” which is a data structure (abstract data type) encapsulated with a set of routines, called “methods”, which operate on the data. Operations on the data can only be performed via these methods, which are common to all objects that are instances of a particular “class”. Thus the interface to objects is well defined, and allows the code implementing the methods to be changed so long as the interface remains the same.
Structured language Object-oriented programming
Taken from dictionary.die.net
Structured Programming
Dividing a problem into smaller subproblem structured design. Each subproblem is then analyzed, and solution or the
subproblem is obtained. The solution to all the subproblem are then combined to solve
the overall problem. The process of implementing a strutted design is called structured
programming. Is also known as:
Top-down design, Stepwise refinement, Modular programming
Object-oriented Programming
In Object-oriented Design (OOD)
The first step in the problem solving process: To identify the components called objects, form the basic of
the solution Determine how these objects interact with one another. e.g: You want to write a program that automates the video
rental process for a local video stores. Two main object: The video The customer
Object-oriented Programming
After identifying the objects, the next step is: To specify the relevant data for each object and possible
operations to be performed on the data. e.g: video objects
The data might be :- movie name, actors, producer.The operation might be :- check the name of the movie, reduce the number of copies in stock by one after a copy is rented.
Object-oriented Programming
In OOD The final program:
Is a collection of interacting objects A programming language that implements OOD is called an OOP. To work with objects you need to know how to combine data and
operations on that data into a single unit is called class.
Object-oriented Programming
In OOP: Object
Consists of: Data The operations on those data.
Combines: Data Operations on the that data into a single unit.
History of JAVA
Initially designed at Sun Microsystems by James Gosling in 1991 as a language that was embedded in consumer electronic items. The language was named as OAK.
In 1993, the growth of internet phenomena, OAK was adapted into internet to create dynamic and interactive web pages.
Sun created web browser named HotJava, was programmed using OAK language called JAVA.
JAVA not only used for web application but also as a general purpose programming language
Introduction of JAVA Application
Introduction of JAVA Application
JAVASimple
Dynamic
Object Oriented
Distributed
Interpreted Robust
Secure
Portable
Performance
Multithread
No Characteristic Description1. Simple Java is partially modeled on C++, but greatly simplified
and improved
2. Dynamic Java was designed to adapt to an evolving environment. New code can be loaded on the fly without recompilation.
3. Object Oriented programming in Java is centered on creating objects, manipulating objects, and making objects work together.
4. Distributed involves several computers working together on a network. Java is designed to make distributed computing easy.
5. Interpreted Java programs are compiled into the Java Virtual Machine code called bytecode, and it is machine independent.
Characteristics of JAVA
Characteristics of JAVA
No Characteristic Description6. Robust Reliability because it puts a lot of emphasis on early
checking for possible errors. Java has a runtime exception-handling feature to provide programming support for robustness.
7. Secure As an Internet programming language, Java is used in a networked and distributed environment. Java implements several security mechanisms to protect your system against harm caused by stray program.
8. Portable Java is architecture neutral. It can run in any platform without being recompiled. The Java environment is portable to new hardware and operating systems
9. Performance Java’s performance is sometimes criticized compared to C++. Because Java is interpreted, the bytecode is not directly executed by the system, but is run through the interpreter.
10. Multithread a program’s capability to perform several tasks simultaneously.
Executing C++ Program
Program in PCMachine language
Program in SUNMachine language
Program in MACMachine language
myProg.cpp
Source File
C++ Compiler for PC
C++ Compiler for SUN
C++ Compiler for MAC
C++ and JAVA
myProg.java
JAVACompli
erSource File(Java Program)
JAVAInterpreterJVM/JRELibrary
files
myProg.class
The compiled program is in the form of bytecode – the same for all machines
C++ and JAVA
Executing JAVA program
Feature C++ JAVA1 Design
goalsTo design a distributed OS For programming consumer
device
2 Designer Bjarne Stroustrup.AT&T Bell Labs in 1979
James Gosling et.al.Sun Microsystems in 1990
3 Language paradigm
Hybrid OO = structured + OO
OO paradigm only
4 Prior language influence
Syntax based on C. Efficient styles based on Simula67
Syntax based on C++, approach based on Smalltalk
5 Strengths A high performance and powerful language
Cross-platform compatibility
6 Compilation Compilation-based – like most language C++ source file -> binary file (*.exe)
Compiled + Interpreted basedJava source file -> Java bytecode -> JVM to execute
C++ vs JAVA
Feature C++ JAVA7 Architecture
-neutral and portability
Platform-dependent binary code cannot be executed on a difference machine
Platform-independent bytecode can run on any machine supporting JVM
8 Simplicity More complex – pointer, operator overloading and etc.
Simpler – no pointer, no overloading and etc.
9 Performance
About 1~20 times faster than equivalent JAVA code
Much slower than C++, but good enough to run interactively for most application
10
Robustness Was not designed for robustness
Originally designed for writing highly reliable or robust software.
C++ vs JAVA
Feature C++ JAVA11
Security Memory is handled at compile-time by compiler
Byte-code is verified at run-time to ensure security restrictions are not violated.Memory layout is handled at run-time by JVM.
12
Networking Not a network-capable language.Network programming : harder
A network-capable language.Network programming: easier.
13
Multi-threaded (concurrent programming)
Single-threaded – rely on external libraries for multithreading
Multi-treaded language – provides native multithreading support.
C++ vs JAVA
Identifier is a name given to variable, constant and method name other than reserved word
It can be alphabet, numeric, underscore(_) or dollar sign ($) The name must begin with alphabet, underscore(_) or dollar
sign($) It is case sensitive Cannot be JAVA reserved word Example valid identifier name :
total _total $total total5
Identifiers
abstract continue goto package synchronized
assert default if private this
Boolean do implements protected throw
break double import public throws
byte else instanceof return transient
case extends int short try
catch final interface static void
char finally long strictfp volatile
class float native super while
const for new switch
JAVA Reserved Words
Primitive data types◦ Simple data types, also referred to as built-in types◦ Different category
Boolean type – boolean Integral type – byte, int, long, char Floating type –float, double
Reference data type◦ Either with a class, array or interface◦ Refers to object◦ Different category
Class types – such as String Array types Interface types
Constant data types◦ Declare using keyword final eg. final double PI = 3.142;◦ Constant declared inside a class using the keyword static
eg. static final double PI = 3.142;
Data Types
String class is part of java.lang package which is automatically included during compilation
Some operation used in String class toUpperCase() toLowerCase() length() charAt() substring() replace()
String
String name;
name = “Abraham Lincoln”;
name = name.toUpperCase(); //ABRAHAM LINCOLN
name = name.toLowerCase(); //abraham lincoln
int x = name.length(); //return the how many characters =15
name = name.charAt(2); //return a character in position 2
Name = name.substring(5); //return the whole word starting position 5
// = ham Lincoln
Name = name.substring(5, 3) //return the word of length 3 starting
// from position 5 = ham
**position in a string always starts with 0
Example of String Operations
Selection structure◦ Make decision – branching statement◦ Similar to C++
if statement if…else statement nested if statement switch statement
Iteration structure◦ Repetition – similar to C++
for statement while statement do…while statement nested loop break and continue
Control Structure
An array is a collection of data value An array is an indexed value of the same type Array of primitive data types
Declarationdatatype variablename []; or datatype [] variablename;
Array creation e.g. variablename = new dataype[size of array];
Array
Example
double[] rainfall; //declare an arrayrainfall = new double[12]; //create array
Consist of one or more individual classes that are stored in the same directory.
Those classes packaged are usually related in providing similar objects and methods
It facilitates software reuse by allowing programs to import classes from other packages libraries to be shared by many users
For example to use PrintStream class in contained in java.io package, you need to include keyword import in front of the package name
import java.io.*;Then you can use the print() and println() method provided by the PrintStream class
Packages
Using I/O console◦ Using Scanner class◦ Create a Scanner object by passing an input stream to the
constructor Scanner s = new Scanner(System.in);◦ You can use these method to read the data from the keyboard :
Integer data value = nextInt() Decimal data value = nextDouble(); String data value = next();
◦ Example : Scanner s = new Scanner(System.in); int num = s.nextInt(); String name = s.next();
Input Statement
Input Statement
Using dialog box You need to use javax.swing.JOptionPane package The method used is showInputDialog, and it has String parameter
which is a message displayed on the monitor. The method returns String value if user enters a value and null value if user
cancels the input The String value can be converted to numeric by the used of these method
Integer = Integer.parseInt() Double = Double.parseDouble() Foat = Float.parseFloat()
Exampleimport javax.swing.*; --
String input = JOptionPane.showInputDialog(null, “Enter an integer number “);
int num = Integer.parseInt();
Using I/O Console By using System.out object through the method print() or println()
Example int total = 4 +5; System.out.print(“The total is “); System.out.println(total); System.out.println(“The total is “ + total);
Output Statement
Output Statement
Using dialog box You need to use javax.swing.JOptionPane package The method used is showMessageDialog, and it has String
parameter which is a message displayed on the monitor screen
Example import javax.swing.*; -- JOptionPane.showMessageDialog(null,”Hello World!”); String s1 = “JAVA is fun”; JOptionPane.showMessageDialog(null, s1);