Janos B WALL-FLEX-SC JET PULSE CLEANING AND TRAY … 2008/001... · 2014. 11. 3. · SILENCER...
Transcript of Janos B WALL-FLEX-SC JET PULSE CLEANING AND TRAY … 2008/001... · 2014. 11. 3. · SILENCER...
Sheet:File Name:Drawing No.:
Material:
Drawn by:
Scale:Date:
Weight:
CUSTOMER:CUSTOMER P.O.:PROJECT:ENGINEER:SALES REP.:IDENTIFICATION / TAGGING:
JET PULSE CLEANING AND TRAYWALL-FLEX-SCJanos B
NTS
1/8--
N/A Specification Drawing
7/4/2014
WALL-FLEX-SC - SD
The device depicted and described hereon embodies proprietary information owned by the manufacturer. All design, manufacturing, reproduction, sales and patent rights regarding this device or drawing reserved except where explicit right is guaranteed in writing. We reserve the right to make design changes.
3. "INVERTED" WALL-FLEX-SC WITH FLEXI ARM1. WALL-FLEX-SC WITH DUCT CONNECTION 2. WALL-FLEX-SC WITH FLEXI ARM
START/STOP BUTTON C/WMOTOR OVERLOAD PROTECTION
SET TO 11.5 AMPS, ENCLOSED IN ANEMA 4 HOUSING
12FT OF 14 GA SJOOW POWER CORD
STANDARD NEMA 5-15P POWER PLUG
MOTOR SPECIFICATIONS:
1100 WATTS/1.5HP/120V/1/60FLA: 10.2 AMPSOVERCURRENT PROTECTIONINCLUDED
NOTES:
NO ADDITIONAL1.PROTECTION REQUIRED
2. SWITCHED OUTLETMAY BE PREFERREDDEPENDING ON UNITLOCATION
SWITCH POSITION CAN BE ROTATED TO SUIT PREFERRED LOCATION
Sheet:File Name:Drawing No.:
Material:
Drawn by:
Scale:Date:
Weight:
CUSTOMER:CUSTOMER P.O.:PROJECT:ENGINEER:SALES REP.:IDENTIFICATION / TAGGING:
JET PULSE CLEANING AND TRAYWALL-FLEX-SCJanos B
NTS
2/8--
N/A Specification Drawing
7/4/2014
WALL-FLEX-SC - SD
The device depicted and described hereon embodies proprietary information owned by the manufacturer. All design, manufacturing, reproduction, sales and patent rights regarding this device or drawing reserved except where explicit right is guaranteed in writing. We reserve the right to make design changes.
BLOWER
COMPRESSED AIRFOR JET PULSE BALL VALVE
FRONT VIEW
29.53
~39.37
SIDE VIEW
19.09
19.75
ISOMETRIC VIEW
Blower package:
Construction:
Nominal CFM:
Extraction arm:
Filtration:
Jet Pulse Cleaning:
Noise level:
Weight:
Specifications:
- 1phase/1.5 HP/115V/60Hz
- 12/14/16 ga. welded steel, powdercoated cabinet
- 600 CFM @ 4” ESP
- Ø6.5” diameter 10’ long Flexi-I arm
- With up to 99,9% filter efficiency the Wall-Flex Cartridge Filters will clean the premisesof welding fumes and light grinding dust.The cleaned air is re-circulated into thepremises, with no heat loss at all. Theaccess to the “maintenance-free”replaceable cartridge filter is easy andchanging it takes just a couple of minutes.
WF-Eco has a very efficient built in compressedair cleaning system. In a few minutes it cleans the built in filter cartridge. Then just open thedoor and empty the dust pan.
Base unit: 77dB(A) @ 3'w/Silencer: 71dB(A) @ 3'w/HEPA Filter: 71dB(A) @ 3'
Base unit: 140 lbs.w/Silencer: 170 lbs.w/HEPA Filter: 180 lbs.
PERFORMANCE CURVE
DUAL ARM CONFIGURATION
Sheet:File Name:Drawing No.:
Material:
Drawn by:
Scale:Date:
Weight:
CUSTOMER:CUSTOMER P.O.:PROJECT:ENGINEER:SALES REP.:IDENTIFICATION / TAGGING:
JET PULSE CLEANING AND TRAYWALL-FLEX-SCJanos B
NTS
3/8--
N/A Specification Drawing
7/4/2014
WALL-FLEX-SC - SD
The device depicted and described hereon embodies proprietary information owned by the manufacturer. All design, manufacturing, reproduction, sales and patent rights regarding this device or drawing reserved except where explicit right is guaranteed in writing. We reserve the right to make design changes.
"INVERTED" DUAL ARM CONFIGURATION
Sheet:File Name:Drawing No.:
Material:
Drawn by:
Scale:Date:
Weight:
CUSTOMER:CUSTOMER P.O.:PROJECT:ENGINEER:SALES REP.:IDENTIFICATION / TAGGING:
JET PULSE CLEANING AND TRAYWALL-FLEX-SCJanos B
NTS
4/8--
N/A Specification Drawing
7/4/2014
WALL-FLEX-SC - SD
The device depicted and described hereon embodies proprietary information owned by the manufacturer. All design, manufacturing, reproduction, sales and patent rights regarding this device or drawing reserved except where explicit right is guaranteed in writing. We reserve the right to make design changes.
ISOMETRIC VIEWS - WALL-FLEX-SC WITH OPTIONS
OPTIONALHEPA FILTER
OPTIONALFLEXI ARM
ADAPTER FOR HEPA FILTER+
OPTIONALHEPA FILTER
DETAIL
ACCESS DOOR
FILTER
TRAY
6.75
6.75
28.75
28.75 19.75 3
4 "
OPTIONAL SILENCER
OPTIONALFLEXI ARM
ACCESS DOOR
FILTER
TRAY
6.0
2.75 19.75
28.75
6.85
Sheet:File Name:Drawing No.:
Material:
Drawn by:
Scale:Date:
Weight:
CUSTOMER:CUSTOMER P.O.:PROJECT:ENGINEER:SALES REP.:IDENTIFICATION / TAGGING:
JET PULSE CLEANING AND TRAYWALL-FLEX-SCJanos B
NTS
5/8--
N/A Specification Drawing
7/4/2014
WALL-FLEX-SC - SD
The device depicted and described hereon embodies proprietary information owned by the manufacturer. All design, manufacturing, reproduction, sales and patent rights regarding this device or drawing reserved except where explicit right is guaranteed in writing. We reserve the right to make design changes.
PDK-8-SW
ISOMETRIC VIEWS - WALL-FLEX-SC INSTALLATION OPTIONS
Sheet:File Name:Drawing No.:
Material:
Drawn by:
Scale:Date:
Weight:
CUSTOMER:CUSTOMER P.O.:PROJECT:ENGINEER:SALES REP.:IDENTIFICATION / TAGGING:
JET PULSE CLEANING AND TRAYWALL-FLEX-SCJanos B
NTS
6/8--
N/A Specification Drawing
7/4/2014
WALL-FLEX-SC - SD
The device depicted and described hereon embodies proprietary information owned by the manufacturer. All design, manufacturing, reproduction, sales and patent rights regarding this device or drawing reserved except where explicit right is guaranteed in writing. We reserve the right to make design changes.
PDK-8-DS
WALL-FLEX-SC WITH OPTIONAL ARM
Sheet:File Name:Drawing No.:
Material:
Drawn by:
Scale:Date:
Weight:
CUSTOMER:CUSTOMER P.O.:PROJECT:ENGINEER:SALES REP.:IDENTIFICATION / TAGGING:
JET PULSE CLEANING AND TRAYWALL-FLEX-SCJanos B
NTS
7/8--
N/A Specification Drawing
7/4/2014
WALL-FLEX-SC - SD
The device depicted and described hereon embodies proprietary information owned by the manufacturer. All design, manufacturing, reproduction, sales and patent rights regarding this device or drawing reserved except where explicit right is guaranteed in writing. We reserve the right to make design changes.
Models and Options:
Sheet:File Name:Drawing No.:
Material:
Drawn by:
Scale:Date:
Weight:
CUSTOMER:CUSTOMER P.O.:PROJECT:ENGINEER:SALES REP.:IDENTIFICATION / TAGGING:
JET PULSE CLEANING AND TRAYWALL-FLEX-SCJanos B
NTS
8/8--
N/A Specification Drawing
7/4/2014
WALL-FLEX-SC - SD
The device depicted and described hereon embodies proprietary information owned by the manufacturer. All design, manufacturing, reproduction, sales and patent rights regarding this device or drawing reserved except where explicit right is guaranteed in writing. We reserve the right to make design changes.
Part # Description
____ WF‐ECO‐SILENCER
Silencer for WF ECO
Part # Description
____ Wall Flex Eco 6'' dia extraction arm connection kit Must use with Flexi I extraction arms 4m in length and longer
____ WF‐ECO‐CON‐KIT‐8
Wall Flex Eco 8'' dia extraction arm connection kit Must use with Flexi II extraction arms 4m in length and longer
Part # Description
____ R‐064 Inlet Ø75 powder coated black, 8 bolts M8 x 16mm. Packed in plastic.
____ R‐063 Inlet Ø100 powder coated black, 8 bolts M8 x 16mm. Packed in plastic.
____ R‐061 Inlet Ø150/160 powder coated black, 8 bolts M8 x 16mm. Packed in plastic.
____ R‐062 Inlet Ø200 powder coated black, 8 bolts M8 x 16mm. Packed in plastic.
____ PDK‐8‐DS Industrial grade DESTRATIFICATION kit for destratifing heat and fugitive emissions.
____ Industrial grade Summer-Winter duct kit used to exhaust air to atmosphere in the summer months and return the air to the facility in winter months.Kit comes complete with the following:1 pc - square to round transition (connects to the exhaust of the WF-SC / WF-ECO)2 pcs of 24" OF 8" diameter spiral duct1 pc - 8" TEE with dual (2) dampers2 pcs - wall flashing (1 for interior wall and 1 for exterior wall)1 pc - 45 degree elbow1 pc - bird screen
Part # Description
____ P‐541 Main Filter for ''Self Cleaning" filter units (RF-SC, CF-ECO, Sledge-hammer, MF-ECO & WF-SC)
____ P‐544 Replacement 99.97% Hepa After Filter For RF-SCF and WF-SCF models
Replacement filters ‐ (Quantity discounts available upon request) ‐ EDIT PART TYPE
Sound Attenuation
PDK‐8‐SW
WF‐ECO‐CON‐KIT‐6
Accessories
Installation Accessories ‐ EDIT PART TYPE
Part # Description
____ Wall Flex with built in jet-pulse cleaning system. Rated at 600CFM at 7" TSP, 1.5HP 115/1/60 motor
Complete with motor, switch, overload protection, cord and Plug.
Part # Description
____ Wall Flex “Self-Cleaning” w/7’ Extraction Arm
Rated at 600CFM at 7" TSP, 1.5HP 115/1/60 motorComplete with motor, switch, overload protection, cord and Plug.
____ Wall Flex “Self-Cleaning” w/10’ Extraction Arm
Rated at 600CFM at 7" TSP, 1.5HP 115/1/60 motorComplete with motor, switch, overload protection, cord and Plug.
____ Wall Flex “Self-Cleaning” w/14’ Extraction Arm
Rated at 600CFM at 7" TSP, 1.5HP 115/1/60 motorComplete with motor, switch, overload protection, cord and Plug.
____ Wall Flex “Self-Cleaning” w/17’ Extraction Arm
Rated at 600CFM at 7" TSP, 1.5HP 115/1/60 motorComplete with motor, switch, overload protection, cord and Plug.
Part # Description
____ WF‐SC‐HEPA Hepa-filter and holder kit. Includes mounting hardware and P-544 HEPA filter.
Part # Description
____ P‐006 Flexi-I Extraction Arm 160mm (6.5”)Ø – 1.5m (5’)L. c/w damper and wall/Fan bracket.
____ P‐007 Flexi-I Extraction Arm 160mm (6.5”)Ø – 2m (7’)L. c/w damper and wall/Fan bracket.
____ P‐008 Flexi-I Extraction Arm 160mm (6.5”)Ø – 3m (10’)L. c/w damper and wall/Fan bracket.
____ P‐009 Flexi-l Extraction Arm 160mm (6.5”)Ø – 4m (14’)L. c/w damper and wall/Fan bracket.
____ P‐010 Flexi-I Extraction Arm 160mm (6.5”)Ø – 5m (17’)L. c/w damper and wall/Fan bracket.
____ P‐143 Flexi-II Extraction Arm: 200mm (8”)Ø – 2m (07')L. c/w damper and wall/Fan bracket.
____ P‐144 Flexi-II Extraction Arm: 200mm (8”)Ø – 3m (10’)L. c/w damper and wall/Fan bracket.
____ P‐145 Flexi-ll Extraction Arm: 200mm (8”)Ø – 4m (14’)L. c/w damper and wall/Fan bracket.
____ P‐146 Flexi-II Extraction Arm: 200mm (8”)Ø – 5m (17’)L. c/w damper and wall/Fan bracket.
Main System / Part
Main System ‐ Pre‐Engineered‐Kits
Filter Options (when ordering main unit)
Extraction Arms
WF‐SCF‐7
P‐551
WF‐SCF‐17
WF‐SCF‐14
WF‐SCF‐10