Jacobsen Equipment

1

www.jacobsen.com

full-lineproduct

guide

www.jacobsen.com

www.lakeshoreturf.com

Jacobsen’s new EclipsE® 2 offers best in class quality of cut, industry leading productivity and customized controls.

QUicK spEcspower: Honda® GX-120 gas engine or 48V 20 Ah sealed lead acid battery

Width of cut: 18, 22 or 26 in. (45.7, 55.9 or 66 cm)

Height of cut:118 and 122 models: .062 - .438 in. (1.57 – 11.13 mm); bench setting126 models: .325 – 1.25 in. (8.26 – 31.75 mm); bench setting

Mow speed: Up to 3.8 mph (6.12 km/h) – electronically setReel diameter: 5 in. (12.7 cm)

Reel blades:118 models: 11 or 15 blade122 models: 11 or 15 blade126 models: 7 blade

Frequency of clip: .064 - .312 in. (1.63 mm – 4.52 mm) in increments of .001 in. (.03 mm)

ECLIPSE ®2Walking Greens Mowers

www.jacobsen.com

cHEcK iT OUT!scan with your smart phone to view the EclipsE® 2 product page. Get app using your smartphone at i-nigma.mobi

ECLIPSE® 2 122F


pRODUcT cONFiGURATiON

AvAilAblE MODEls

ECLIPSE 2 118 HybrId or ELECtrIC

ECLIPSE 2 118F HybrId or ELECtrIC


ECLIPSE 2 122F HybrId or ELECtrIC


QUAliTy OF cUT• The patented true floating head and Classic XPTM reel combine to

produce Jacobsen’s legendary quality of cut.

pRODUcTiviTy• Delivers industry leading productivity with a maximum mow speed

of up to 3.8 mph while maintaining the tightest frequency of clip.

cONTROl• Password protected LCD menu allows you to set the frequency of clip, mow speed and other settings to customize mower to course conditions.

ECLIPSE ®2

MAGKnIFE™

roLLErS turF GrooMErS®

VErtICuttErS FInE brIStLE bruSH

.

MowEr CAddy

EQUippED sTANDARD

3 Electronic frequency of clip setting

3 Mower speed setting

3 Reel speed (in non-FOC mode)

3 Operator presence control (OPC)

3 11 or 15 blade reel (18 and 22 in. units)

3 7 blade reel (26 in. unit)

3 Grass catcher

3 Kick stand

3 Hour meter

3 Maintenance hour meter

3 Backlapping

AccEssORiEs

Front rollers

Front roller scrapers

Turf Groomer

MAGKnifeTM

Fine bristle brush

Verticutters

LED light kit

Transport wheels

Mower caddy

Mower caddy mounting brackets

Push brush

ECLIPSE®2 122F ECLIPSE®2 118 Electric ECLIPSE®2 118F


Jacobsen’s new EclipsE® 2 offers best in class quality of cut, industry leading productivity and customized controls.

QUicK spEcspower: Honda® GX-120 gas engine or 48V 20 Ah sealed lead acid battery

Width of cut: 18, 22 or 26 in. (45.7, 55.9 or 66 cm)

Height of cut:118 and 122 models: .062 - .438 in. (1.57 – 11.13 mm); bench setting126 models: .325 – 1.25 in. (8.26 – 31.75 mm); bench setting

Mow speed: Up to 3.8 mph (6.12 km/h) – electronically setReel diameter: 5 in. (12.7 cm)

Reel blades:118 models: 11 or 15 blade122 models: 11 or 15 blade126 models: 7 blade

Frequency of clip: .064 - .312 in. (1.63 mm – 4.52 mm) in increments of .001 in. (.03 mm)


www.jacobsen.com


ECLIPSE® 2 122F

On-board backlapping minimizes down-time by allowing for quick and easy reel maintenance

Classic XP reel design delivers the industry best quality of cut

Patented true floating head allows lowest heights of cut without scalping, even on the most undulating green

Fully isolated mounted engine reduces operator fatigue

Lightest handle weight in the industry provides adjustable height for comfort and ease of use

Regenerative braking forincreased speed control

Moveable power source allows you to adjust the weight on the front roller for the fixed head unit and ease of turning on the floating head unit

Control the speed through the speed paddle or bale, allowing the operator to easily slow down for turns and return to normal speed when the turn is finished

Optional LED light uses less energy and is brighter while allowing your staff to get on the course sooner for minimal disruption

Widest array of frequency of clip settings – requires no tools and takes just seconds to change

Settings are accessed through password protected menu

Maximum mow speed up to 3.8 mph

Honda® engine – industry proven reliability

Improved kickstand for easier operation

ECLIPSE®2 122F shown

Superior tracking with true automotive differential. Drives from one point versus two belts or chains which require adjustment to track straight


Introducing the industry’s first 15-blade reel from Jacobsen – the highest productivity and quality-of-cut ever designed into a reel.

15-blade ReelOne More “Reel” Reason Jacobsen® is a Cut Above The Rest

1.888.922.TURF www.jacobsen.com

©2012 Jacobsen, A Textron Company/Textron Innovations Inc. All rights reserved. 1011/C/FEB2012

SPECIFICATIONS

*Engine horsepower is provided by engine manufacturer. Actual operating power output may vary due to conditions of specific use. notE: Specifications, while correct at time of printing, may change without notice.


Power

Engine Hybrid Models: Honda® GX-120

Generator Hybrid Models: 1.3 hp (1 kW) continuous; 48 VDC brushless

Battery Pack Electric Models: 48V 20Ah sealed lead acid

Sound Power Level Hybrid Models: 88 dBA

Electric Models: 82 dBA

Fuel Capacity Hybrid Models: .66 gal (2.5 L)

Traction and Differential

Drive Motor 1.3 hp (1 kW) continuous; brushless DC

Traction Drive via synchronous belt

Operator Presence Control InCommand™ standard

Differential Full automotive type, housed in traction drum

Traction Drum 7.75 in. (19.68 cm) diameter smooth machined aluminum

Brakes Lever actuated hub brake with parking lock

Transport Wheels Pneumatic 11 in. x 4 in. (27.94 cm x 16.16 cm)

Mowing Speed Electronically controlled, 3.8 mph (6.12 km/h) maximum

Reels and Blades

Reel Bearings Spring-loaded, tapered roller

Reel Diameter 5 in. (12.7 cm)

Number of Blades

18 and 22 in units: 11 blades/15 blades

26 in. unit: 7 blades

Blade Material Hardened, high manganese carbon steel

Cutting Frequency Variable (electronically programmable)

Reel Motor 1.3 hp (1 kW) continuous; brushless DC

Reel Speed Electronically controlled, 2200 RPM maximum

Height-of-Cut 18 and 22 in. units: .062 - .438 in. (1.57 – 11.13 mm); bench setting

26 in unit: .325 – 1.25 in. (8.26 – 31.75 mm); bench setting

Bedknife Material Hardened carbon steel

Weight and Dimensions

Ready-to-Cut Weight 18 in. electric: 233 lbs (106 kg) 22 in. electric: 246 lbs (112 kg) 26 in. electric: 264 lbs (120 kg)

18 in. hybrid: 213 lbs (97 kg) 22 in. hybrid: 229 lbs (104 kg) 26 in. hybrid: 245 lbs (111kg)

18 in. floating head electric: 269 lbs (122 kg) 22 in. floating head electric: 271 lbs (123 kg)

18 in. floating head hybrid: 248 lbs (113 kg) 22 in. floating head hybrid: 252 lbs (114 kg)

Widths of Cut: 18, 22 or 26 in. (45.7, 55.9 or 66 cm)

1.800.398.0388 www.lakeshoreturf.com

GK 500TM

CHECK IT OUT!Scan with your smart phone to view the GK 500TM product page. Get app using your smartphone at i-nigma.mobi

• InCommand™ Control System - Features user-friendly D-handle with variable speed control and more functional operator presence controls.

• Precision Balanced - Precisely balanced for true, straight-line tracking.

• Optional Turf Groomer® - Improves turf conditions through three-dimensional mowing.

• Durable Centrifugal Clutch - Engages easily for smooth operation with no adjustments required.

• Quiet belt drive system uses no oils, eliminating leaks on your green.

• Please Note: Due to legislation requiring technical manuals to be printed in multiple languages, this product may not currently be available for purchase in all non-English speaking countries. Please contact your nearest distributor or Contact Us for full details.

www.jacobsen.com

Engine: Honda® GX-120 gas engine

Width of Cut:

GK 518: 18 in. (45.7 cm) bench setting



Mow speed: 3.2 mph (5.14 km/h)

Reel blades: 11 blade (7 blade on GK526)

Frequency of clip:

11 blade: .169 in. (4.3 mm)

7 blade: .25 in. (6.3 mm)

QUICK SPECS

Walking Greens Mowers

The GK 500 series by Jacobsen® includes the 518, good for undulating turf, the 522, and the 526 for increased productivity on flat greens and tees. This durable, reliable walking greens mower comes standard with Jacobsen’s legendary quality of cut.


EQUIPPED STANDARD

3InCommand control system w/ operator presence control (OPC)

3 Grass catcher

3 Band type brakes

3 Kickstand

3 Honda® gas engine

ACCESSORIES

Front rollers

Front roller scrapers

Turf Groomer

MAGKnifeTM

Fine bristle brush

Verticutters

LED light kit

Transport wheels

Mower caddy

Mower caddy mounting brackets

Push brush

Engine

Type Honda® GX-120 gas engine

Horsepower* 4 hp (2.9 kw)

Maximum Torque 5.4 ft. lbs 7.5 Nm

Fuel Capacity .66 gal. (2.5 L)


Reel Drive Belt Drive

Drive Clutch Centrifugal

Traction Reduction Ratio 21.8:1

Operator Presence Control Standard; Controls reels and traction drive

Differential Full automotive type, housed in traction drum

Reel Drive Drum Aluminum Alloy

Mowing Speed 3.2 mph (5.14 km/h)

Traction and Drive

Traction System Parallel-series “on demand” 3 WD

Reel Drive Fixed displacement hydraulic with standard backlap

Hydraulic System 5.5 gal. (21 L) capacity; 10 micron, full flow filtration; GreensCare™ biodegradable oil

Reels and Blades

Reel Reduction Ratio 1.67:1

Reel Bearings Spring-loaded, tapered roller

Reel Diameter 5 in. (127 mm)

Number of Blades 11 (7 on GK526)

Blade Material Hardened high carbon steel

Cutting Frequency 11 blade: .169 in. (4.3 mm) 7 blade: .25 in. (6.3 mm)

Side Frame Material Aluminum alloy


Weight GK 518: 210 lbs. (95.2 kg) GK 522: 220 lbs. (99.8 kg) GK 526: 230 lbs. (104.3 kg)

Height-of-cut GK 518 and 522: .062 in. - .438 in.(1.6 mm – 11.1 mm) GK 522: .062 in. – 1.25 in.(1.6 mm – 31.8 mm)

Width-of-cut GK 518: 18 in. (45.7 cm) GK 522: 22 in. (55.9 cm) GK 526: 26 in. (66.1 cm)

SPECIFICATIONS

1.888.922.TURF | www.jacobsen.com


Walking Greens Mowers

GK 500TM

PRODUCT CONFIGURATION

* Engine horsepower is provided by engine manufacturer. Actual operating power output may vary due to conditions of specific use. NOTE: Specifications, while correct at time of printing, may change without notice.


With no hydraulics and better control, the Jacobsen EclipsE® 322 riding greens mower delivers the highest quality of cut and lower operating costs.

QUicK spEcspower: Battery: 48V lead acid (six 8 volt 190A deep cycle) Hybrid Gas: 14 hp (10.14 kW) Briggs & Stratton Vanguard V-Twin air cooled Hybrid Diesel: 13.3 hp (9.9 kW) Kubota Z482 2-cylinder diesel liquid cooled

Width of cut: 62 in. (1.6 meters)

Height of cut:.062 - .438 in. (1.6 – 11.1 mm)

Mow speed: 0 – 5 mph (0 – 8.9 km/h), electronically adjustable

cutting Units: Three 22 in. (.56 m) reels, 5 in. (12.7 cm) diameter with 7, 9, 11 or 15 blades

Riding Greens Mowers

www.jacobsen.com


EclipsE® 322

EclipsE ® 322


pRODUcT cONFiGURATiON

NO HyDRAUlic Oil lEAKs - EVER• No chance of turf damage since there is no hydraulics on the machine.

• No filters to change or hoses and valves to worry about equals less maintenance.

GREATER cONTROl, BEsT iN clAss QUAliTy OF cUT • Program your frequency of clip, mow speed, transport speed, and other

setting through a password protected menu to deliver consistent results regardless of the operator. Change your settings as course conditions change throughout the year.

• FeaturestheJacobsenClassicXPTM Reels known to deliver the best quality of cut in the industry.

lOWER OpERATiNG cOsTs• Batteryunitscanlowerannualoperatingcostby86%throughfuelsavingsupto630gallonsoffuel,26fewergallonsofwasteoilandreducescheduled maintenance.

• Hybridunitscanlowerannualoperatingcostby35%throughfuelsavingsupto180gallonsoffueland18fewergallonsofwasteoil.

• Seehowmuchyoucansavewiththeonlinecostcalculatorat www.ECLIPSE322.com

EclipsE ®322

AVAilABlE MODEls

ECLIPSE322BATTERY

ECLIPSE322HYBRIDGAS

ECLIPSE322HYBRIDDIESEL

ECLIPSE3223-WHEELDRIVE(ALLmoDELS)

EQUippED sTANDARD

3 EXCLUSIVE programmable frequency of clip, mow speed, transport speed, reel speed (in no FOC mode) & cross cut position

3 One touch up/down joystick controls for reels

3 On board diagnostic through LCD screen

3 Center swing out reel

3 On board backlapping

3 Grass catchers

3 Automatic parking brake

3 Durable welded reel frame construction (on floating heads)

3 Regenerative braking

3 LED headlight

3 ROPS

3 On board battery charger (battery units only)

3 One point battery watering system (battery units only)

cUTTiNG UNiTs

22 in. (55.9 cm) 15, 11, 9 or 7 blade reel

22 in. (55.9 cm) Verticut reel, .75 in. (19 mm)

ROllERs

22 in. (55.9 cm) Grooved assembly steel disc roller – 2 in. (5.1 cm) diameter

22 in. (55.9 cm) Grooved segmented machined aluminum roller – 2 ¼ in. (5.7 cm) diameter

22 in. (55.9 cm) Solid tube steel roller with scraper (light duty) – 2 in. (5.1 cm) diameter

22 in. (55.9 cm) Solid tube steel roller with scraper (heavy duty) – 2 in. (5.1 cm) diameter

22 in. (55.9 cm) Grooved machined steel roller – 2-3/16 in. (5.6 cm) diameter

22 in. (55.9 cm) Grooved machined aluminum roller – 2-3/16 in. (5.6 cm) diameter

AccEssORiEs

Turf Groomer, 22” width and .25” or .50” spacing

Quick Roll greens roller

Spiker

Powered rear roller cleaning brush

High cut kit – 15/16 in. (2.4 cm) when used with 2-3/16 in. (5.6 cm) roller

Reel conversion kit - converts G-Plex or GP400 reels to Eclipse 322

Premium seat – Grammer seat in gray vinyl with suspension base, adjustable brackets

LED light kit, ROPS mounted

Dew whip holder

Canopy/Sunshade kit - adjustable

Tow bar

Traction tire assembly 18 x 9.5 x 8 (wheel and tire)

International charger kit for battery units 220V and IEC Standard

Ergonomically designed cockpit has swing out armrest controls and LED headlight among other user-friendly features.

Swing-out center reel allows for easy access for adjustment and service.

Steer-by-wire system eliminates hydraulics and cables, allowing for quick turns and assuring an exceptionally straight line.

Greens Management System includesJacobsenClassicXP™ Reels and multipleoptionalattachmentsthatincreasetheversatilityoftheEclipse322.

Automatic parking brake is self-actuating, maintenance-free and applies automatically when the pedal accelerator is released.

Optional 3-wheel drive model offers superior climbing ability on tees, approaches and fairways.A3-wheeldriveupgradekitisavailableforexisting2-wheeldrivemodels.

Programmable frequency of clip (FOC) can be tailored to achieve the most consistent playing conditions and healthiest turf conditions, regardless of the operator.

Individual reel control isexclusivetotheEclipse322.Selectandengageonlythereelsyou want, minimizing the wear pattern known as triplex ring.

QuICkRoLLTm TuRfGRoomERS®VERTICuTTERS SPIkER

Full on-board diagnostics and monitoring are displayed through an LCD screen and on LED readouts. No additional diagnostic tools or attachments required.

Introducingtheindustry’sfirst15-bladereelfrom Jacobsen–thehighestproductivityandquality-of-cut ever designed into a reel.

15-Blade ReelOne More “Reel” Reason Jacobsen® is a Cut Above The Rest


©2012Jacobsen,ATextronCompany/TextronInnovationsInc.Allrightsreserved.1012/C/FEB2012

SPECIFICATIONS

*Enginehorsepowerisprovidedbyenginemanufacturer. Actualoperatingpoweroutputmayvaryduetoconditions ofspecificuse.NoTE:Specifications,whilecorrectattimeofprinting,may changewithoutnotice.

EclipsE®

322Riding Greens Mowers

Power Battery Hybrid Gas Hybrid DieselEngine BriggsandStrattonVanguardV-Twin;

air-cooled;14hpKubotaZ4822-cylinderdiesel;liquidcooled;13.3hp

Generator 48V,5.8kWContinuousDisplacement 29.23cu.in.(479cc)BatteryPack 48V(six8volt190AHdeepcycleleadacidbatteries)withsinglepointwateringsystemBatteryCharger On-boardhighfrequencycharger18amp,48VDCoutput,85-265VAC45-65HzinputTraction & Drive System SystemVoltage 48VnominalTractionDrive2WD/3WD Front/2WD-AC;4.4hp(3.3kW)continuous/Rear/3WD–PM;3.2hp(2.4kW)Reel Drive OnebrushlessDCmotorperreel;1.3hp(0.97kW)continuousReel Lift One linear actuator per reel with individual control Tires, Brakes & Steering Tires2WD/3WD 2WD,3-18x10.5x84-ply/2(front)-18x10.5x84-plyand1(rear)18x10.5x104-plyParkingBrake Automatic electro-magnetic multi-plate Steering Variableratioby-wiresteeringwithfeedbackcontrolSpeed Mowing 0-5.0mph(0-8.9kph);electronicallyadjustablemaxspeedTransport 0-9.0mph(0-14.5kph);electronicallyadjustablemaxspeedReverse 0-4.0mph(0-6.4kph)Weight & Dimensions Weight2WD-withreels 1394lbs.(632kg)withallfluids 1322lbs.(599kg)withallfluids 1362lbs.(739kg)withallfluids

Weight3WD 1432lbs.(649kg)withallfluids 1360lbs.(616kg)withallfluids 1401lbs.(635kg)withallfluids

Length with Catchers On 101in.(2.57m)HeightwithROPS 79.3in.(2.01m)WheelBase 52in.(1.32m)Width 58.75in.(1.5m)outsideoftiresOverallWidth 67.7in.(1.72m)withreelsGroundClearance(atreels) Front:6.125in.(15.5cm)Rear:4.25in.(10.8cm)Turning Circle Inside:20.25in.(0.51m)Outside:144.25in.(3.7m)FuelCapacity 5gal.(19L)Approximate Run Time per Tank 10hrs. 15hrs.Approximate Run Time per Charge 3-3.5hrs. Approximate Recharge Time 4-6hrs. Operator Levels Operator Ear Noise Level 84dBAReels & Blades NumberandSize Three22in.(0.56m)reels;5in.(127mm)diameterNumberofBlades 7,9,11,15

CuttingFrequency 0.05-0.25in.(1.2-6.3mm)with11bladereel;electronicallyadjustableOverallCuttingWidth 62in.(1.6m)HeightofCutRange(dependingon turfconditionandbedknifeinstalled)

0.062-0.438in.(1.6-11.1mm)

Backlapping Standardon-boardbacklappingReelWeights 7bladereel,86lbs,9bladereel,87lbs,

11bladereel,89lbs,15bladereel,92lbs


REELSIntroducing the industry’s first 15-blade reel from Jacobsen® – the highest productivity and quality-of-cut ever designed into a reel.

The MOST PRODUCTIVE reels on the market • Increase mow speed up to 36% with the 15-blade reel.

Maximize mow speed while maintaining the desired Frequency of Clip (FOC) and reel speed.

• Electronically programmable speed controls and the highest number of reel blades on greens mowers are only available through Jacobsen. Only Jacobsen delivers the highest productivity, saving you time and money.

The BEST QUALITY-OF-CUT in the business• Additional blades provide a tighter FOC, thus reducing

stragglers, yielding a smoother surface, and delivering the ability to raise the height-of-cut without compromising ball speed.

• Nothing cuts like a Jake. Jacobsen Classic XP™ Reels with Advanced Relief Technology™ are renowned for the best quality-of-cut in the industry.

The HEALTHIEST TURF on your course• By raising the height-of-cut, you can minimize stress on

the turf and reduce your water and chemical usage.

Save Time and Money• Allows for less chemical and water usage, saving you money.

• Virtually eliminates the need to double cut, saving you time.

• Increased mow speed saves time and labor costs and allows you to stay ahead of golfers. *Diagrams not to scale. For illustration purposes only.

At maximum mow speed, the 15-blade reel can provide a tighter FOC than any other reel on the market.

A tighter FOC provides a smoother playing surface, increasing ball speed. With the 15-blade reel you can now achieve this tighter FOC at a higher height-of-cut and maintain current ball speed.

www.jacobsen.com

©2011 Jacobsen, A Textron Company. All rights reserved.

PARTSJACOBSEN® 15-BLADE REEL

Cut Grass Cut Grass

.100”

.190”

Cut Grass Cut Grass

.100”

.190”

Cut Grass Cut Grass

.100”

.190”

Cut Grass Cut Grass

.100”

.190”

ONE MORE “REEL” REASON JACOBSEN® IS A CUT ABOVE THE REST

THE RESULT: FAST. TRUE. SMOOTH. HEALTHY.

More Blades Provide a Tighter FOC

Tighter FOC means faster, more consistent ball speed.


MODELS AVAILABLE

©2011 Jacobsen, A Textron Company. All rights reserved. 4251011/rev1/APR2011

The Official Turf Equipment Supplier to The PGA of America and The Exclusive Turf

Equipment Supplier to PGA Golf Properties.


PROUDMEMBER

Eclipse 122 Hybrid and Battery

Eclipse 122F Hybrid and Battery

Eclipse 118 Hybrid and Battery

Eclipse 118F Hybrid and Battery

22" 15-blade cutting unit for Eclipse 322

PARTS

Classic XP™ Reels with Advanced Relief Technology™ provide the legendary quality-of-cut Jacobsen is known for. Whether 7, 9, 11 or 15-blade, the increased durability, reduced wear and extended life allow the reels to maintain a sharp edge longer, resulting in a consistent cut, and less labor and downtime.

• Advanced Relief Technology features a 45-degree relief angle and improved face angle of the reel blade to significantly extend the life of the blade and optimize it for less wear and abrasion.

• The Jacobsen grinding process yields the best blade surface and delivers up to three times more spin grinds than generic aftermarket blades.

PROGRAMMABLE CONTROLS AND 15-BLADE REEL The perfect combination of productivity and quality-of-cut.The new Jacobsen® Classic XP™ 15-blade reel offers unbeatable performance on the Eclipse® 100 walk-behind series and the new Eclipse® 322 ride-on series. The electronic dual motor controls provide the ability to adjust the frequency of clip (FOC) independent to the mow speed, thus optimizing the ability to adapt to course requirements and conditions, and increase run time. By programming mow speed, reel speed, and height-of-cut to your course’s needs, the new Jacobsen Classic XP™ 15-blade reel will make it easier than ever to take your greens to tournament conditions.

Note: Content, while correct at time of printing, may change without notice.

Service reels available for models listed above.

THE JACOBSEN® CLASSIC XP™ REEL ADVANTAGE

WHY CHOOSE JACOBSEN?• No other manufacturer

has more blades or a better quality-of-cut.

• No other manufacturer has electronically programmable controls to adjust FOC, reel speed and mow speed.

• We give you the most productive and the best quality-of-cut greens mowers on the market.

• You will have the most productive cutting machines on the planet.


EQUIPPED STANDARD

3Joystick control

3Adjustable mow speed

3Adjustable transport speed

3On board backlapping

3Rear unit sequencing

3Front reel soft drop

3Automotive handbrake

3One-piece seat

3Headlight

3GreensCare biodegradable hydraulic fluid

3ROPS with seat belt

CUTTING UNITS

22 in. (55.9 cm) 11, 9 or 7 blade reel

22 in. (55.9 cm) Verticut reel

ACCESSORIES

22 in. (55.9 cm) Front rollers ranging from 2 in. (5.1 cm) to 2 ¼ in. (5.7 cm) – solid tube steel, grooved assembled or machined aluminum or steel

Grass catcher kit (new Eclipse style)

Turf Groomer®

Quick roll greens roller (set of 3)

Spiker attachment w/ frame assembly

22 in. (55.9 cm) front roller fine bristle brush

Powered rear roller brush for 5 in. x 22 in. (12.7 x 55.9 cm) cutting unit

High cut kit – 15/16 in. (2.4 cm) when used with 2 3/16 in. (.5 cm) roller

GP400 3WD kit

Automatic mow speed selection kit

GENUINE SERVICE PARTS

Classic XP reels (7, 9 or 11 blade)

Low or high profile, medium section, tournament, super tournament or super tournament XXR bedknives

MAGSystem™ kits

Low and high profile, medium section, tournament and super tournament MAGKnives

GreensCare™ 46 and GreensCare Plus 46 hydraulic fluid

Engine

Type Diesel:Kubota®D7223-cylinderTier4Gas:Briggs&Stratton®Vanguard™V-twin

Horsepower* 17.7hp(13.2kW)@3200rpm

Displacement Diesel:43.88cu.in.(719cc)/Gas:35cu.in.(574cc)

AirCleanerSystem Dry,twostage

CoolingSystem Diesel:Pressurized,sealedcoolingsystem;coolantcapacity:1gal.(3.79L)/Gas:Air-cooled

FuelCapacity 15gal.(56.8L)

Speed ( Maximum)

Mowing 3.7mph(6km/h)

Transport Centrifugal

Reverse 1.9mph(3.1km/h)

Traction and Drive

TractionDrive Hydraulicmotoroneachdrivewheel

ReelDrive Gear-typehydraulicmotor;backlapcontrolvalvestandard

ReelLiftHydraulicSystem Hydraulicdoubleactioncylinders;parallellinkheadlevelingsystem6.8gal.(25.7L)capacity;10micron,full-flowfiltration;biodegradablefluid;oilcoolerstandard

Tires, Brakes and Steering

Tires 20x10-10,2-plypneumatic,tubeless

ParkingBrake 6in.(152mm)caliperdisc,handoperated

GroundPressure Diesel:14psi(.98kg/cm2)/Gas:10psi(0.7kg/cm2)

Steering Power

Reels and Blades

NumberandSize Three22in.(55.9cm)reels;5in.(127mm)diameter

NumberofBlades 7,9,11

BladeMaterial Hardened,highcarbonsteel

CuttingFrequency 0.050in/mph(.789mm/kph)with11-bladereels

OverallCuttingWidth 62in.(1.6m)

Height-of-CutRange(Dependingonturfconditionandbedknifeinstalled)

0.062-0.438in(1.6mm-11.1mm)


Weight 1463-1622lbs.(664-736kg)

Length(lesscatchers) 83in.(2.12m)

Height(withROPS 67.7in.(1.72m)

Wheelbase 51.2in.(1.30m)

Width 74.5in.(1.89m)

SPECIFICATIONS




GP400


*Enginehorsepowerisprovidedbyenginemanufacturer.Actualoperatingpoweroutputmayvary duetoconditionsofspecificuse. NOTE:Specifications,whilecorrectattimeofprinting,maychangewithoutnotice.

GP400

CHECK IT OUT!Scan with your smart phone to view the GP400TM product page. Get app using your smartphone at i-nigma.mobi

• Ergonomically re-styled dash panelhasclearandeasytouseoperatorcontrolsincludingaone-touchjoysticklift /lowercontrol

• Exclusive swing-out reel and quick release mounting systemforeasymaintenanceandadjustment.

• Jacobsen Classic XP™ reels with7,9or11bladesareknownforthebestqualityofcutintheindustry.

• On-board backlappingisstandardforbothgasanddieselunits.

• Improved serviceabilitywitharefinedhydraulicsystemandeasyaccesstoelectricalcomponentsandbattery.

www.jacobsen.com

Engine: Gas or Diesel

Mowing Speed: 3.7 mph (6 km/h)

Height of Cut: 0.062 – 0.438 in. (1.6 mm – 11.1 mm)

Width of Cut: 62 in. (1.6 m)

Dimensions:

Weight: 1463 – 1622 lbs. (664 – 736 kg)

Length (less catchers): 83 in. (2.12 m)

Height with OPS: 67.7 in. (1.72 m)

Width: 74.5 in. (1.89 m)

QUICK SPECS


The Jacobsen GP400TM combines the features of its predecessor, the G-Plex III, with superior ergonomics and engineering to better meet the needs of operators and mechanics.


EQUIPPED STANDARD

3Joystick control

3Adjustable mow speed

3Adjustable transport speed

3On board backlapping

3Rear unit sequencing

3Front reel soft drop

3Automotive handbrake

3One-piece seat

3Headlight



CUTTING UNITS

22 in. (55.9 cm) 11, 9 or 7 blade reel

22 in. (55.9 cm) Verticut reel

ACCESSORIES

22 in. (55.9 cm) Front rollers ranging from 2 in. (5.1 cm) to 2 ¼ in. (5.7 cm) – solid tube steel, grooved assembled or machined aluminum or steel

Grass catcher kit (new Eclipse style)

Turf Groomer®

Quick roll greens roller (set of 3)

Spiker attachment w/ frame assembly


Powered rear roller brush for 5 in. x 22 in. (12.7 x 55.9 cm) cutting unit

High cut kit – 15/16 in. (2.4 cm) when used with 2 3/16 in. (.5 cm) roller

GP400 3WD kit

Automatic mow speed selection kit


Classic XP reels (7, 9 or 11 blade)

Low or high profile, medium section, tournament, super tournament or super tournament XXR bedknives

MAGSystem™ kits

Low and high profile, medium section, tournament and super tournament MAGKnives

GreensCare™ 46 and GreensCare Plus 46 hydraulic fluid

Engine

Type Diesel:Kubota®D7223-cylinderTier4Gas:Briggs&Stratton®Vanguard™V-twin

Horsepower* 17.7hp(13.2kW)@3200rpm

Displacement Diesel:43.88cu.in.(719cc)/Gas:35cu.in.(574cc)

AirCleanerSystem Dry,twostage

CoolingSystem Diesel:Pressurized,sealedcoolingsystem;coolantcapacity:1gal.(3.79L)/Gas:Air-cooled


Speed ( Maximum)


Transport Centrifugal


Traction and Drive


ReelDrive Gear-typehydraulicmotor;backlapcontrolvalvestandard

ReelLiftHydraulicSystem Hydraulicdoubleactioncylinders;parallellinkheadlevelingsystem6.8gal.(25.7L)capacity;10micron,full-flowfiltration;biodegradablefluid;oilcoolerstandard


Tires 20x10-10,2-plypneumatic,tubeless

ParkingBrake 6in.(152mm)caliperdisc,handoperated

GroundPressure Diesel:14psi(.98kg/cm2)/Gas:10psi(0.7kg/cm2)

Steering Power

Reels and Blades

NumberandSize Three22in.(55.9cm)reels;5in.(127mm)diameter


BladeMaterial Hardened,highcarbonsteel

CuttingFrequency 0.050in/mph(.789mm/kph)with11-bladereels


Height-of-CutRange(Dependingonturfconditionandbedknifeinstalled)

0.062-0.438in(1.6mm-11.1mm)


Weight 1463-1622lbs.(664-736kg)


Height(withROPS 67.7in.(1.72m)



SPECIFICATIONS




GP400




GREENS KING® IV /IV Plus

• Greens King IV:ManualSteering;GreensKingIVPlus:PowerSteering

• Attachments includeverticalmowers,spikers,brushes,greensrollersandTurfGroomers®

• Walk-through operator stationallowsaccessfromeitherside

• On-board backlapping

• Free-floating, steerable cutting headsmoveindependentlyofthetractor

• GreensCare™ biodegradable oileliminatestheriskoflong-termturfproblemsandenvironmentalcontamination

www.jacobsen.com

Engine: Briggs & Stratton® Vanguard™ V-Twin Gas or Kubota® D722 Diesel

Mow Speed: 3.7 mph (6 km/h)

Height of Cut: 0.062 – 0.438 in. (1.6 – 11.1 mm)


Dimensions:

Weight (less catchers): 1068 – 1174 lbs. (484.4 – 532.5 kg)

Length (less catchers): 87.5 in. (2.22 m)

Height with ROPS: 78 in. (1.98 m)

Width: 70 in. (1.78 m)

QUICK SPECS


The Greens King® IV is our least expensive and lightest

weight riding greens mower. The GK IV offers reduced

maintenance and fewer potential leak points.

The Greens King IV Plus, available in both Gas and

Diesel models, adds to the great features of the

Greens King IV with power steering for easier

operation and a higher horsepower engine to

tackle the toughest jobs. Quality, reliability and

simplicity are what make the Greens King IV

and IV Plus some of our best selling ride-on greens

mowers. Their simple design is easy to maintain and

Jacobsen reels provide a superior quality of cut every time.Factory-filled with GreensCare™ Biodegradeable Hydraulic Fluid

CHECK IT OUT!Scan with your smart phone to view the Greens King IV Plus diesel product page. Get app using your smartphone at i-nigma.mobi


EQUIPPED STANDARD

3 Standard ROPS with seat belt

3 GreensCare biodegradable hydraulic fluid

3 On board backlapping

3 One piece seat

3 Grass catchers

CUTTING UNITS

22 in. (55.9 cm) 11 blade reel



22 in. (55.9 cm) Verticut reel, .75 in. (1.9 cm) spacing

ROLLERS

22 in. (55.9 cm) Grooved assembly steel disc roller, 2 in. (5.1 cm) diameter

22 in. (55.9 cm) Grooved segmented machined aluminum roller, 2.25 in. (5.7 cm) diameter

22 in. (55.9 cm) Solid tube steel roller with scraper (light), 2 in. (5.1 cm) diameter

22 in. (55.9 cm) Solid tube steel roller with scraper, 2 in. (5.1 cm) diameter

22 in. (55.9 cm) Grooved machined steel roller, 2-3/16 in. (5.56 cm) diameter

22 in. (55.9 cm) Grooved machined aluminum roller, 2-3/16 in. (5.56 cm) diameter

ACCESSORIES

Quick Roll greens roller

Spiker with frame assembly, 2 in. (5.1 cm) spacing, 30 blades


Powered rear roller brush

High cut kit – 15/16 in. (2.4 cm) when used with 2-3/16 in. (5.56 cm) roller

Grass catcher

Canopy/Sunshade kit

Arm rest kit

Hydraulic motor storage kit

Light kit


9 blade, 5 in. x 22 in. (12.7 x 55.9 cm) Classic XP reel cylinder

11 blade, 5 in. x 22 in. (12.7 x 55.9 cm) Classic XP reel cylinder

22 in. (55.9 cm) high profile Legendary™ bedknife

22 in. (55.9 cm) low profile Legendary bedknife

22 in. (55.9 cm) tournament Legendary bedknife

22 in. (55.9 cm) super tournament Legendary bedknife

22 in. (55.9 cm) super tournament XXR bedknife

MAGSystem™ kit with backing, magnets and tournament MAGKnife™

MAGSystem kit with backing, magnets and super tournament MAGKnife

22 in. (55.9 cm) medium section MAGKnife

22 in. (55.9 cm) high profile MAGKnife

22 in. (55.9 cm) low profile MAGKnife

22 in. (55.9 cm) tournament MAGKnife

22 in. (55.9 cm) super tournament MAGKnife

GreensCare 46 – 5 gal. (18.9 L) pail

GreensCare 46 – 55 gal. (208.2 L)drum

GreensCare Plus 46 – 5 gal. (18.9 L) pail

500 hour interval maintenance kit including (1) engine air filter, (1) engine oil filter, (1) hydraulic oil filter, 5 gal. (18.9 L) GreensCare 46 biodegradable hydraulic oil

Engine

Type GKIVandGKIVPlusGas:Briggs&Stratton®Vanguard™V-twinGKIVPlusDiesel:Kubota®D7223-cylinderdiesel

Horsepower* GKIV:16hp(11.9kW)GKIVPlusGas:18hp(13.4kW)@3600rpmGKIVPlusDiesel:17.7hp(13.2kW)

Displacement GKIV:29.3cu.in.(480cc)GKIVPlusGas:34.78cu.in.(570cc)@3600rpmGKIVPlusDiesel:43.88cu.in.(719cc)

AirCleanerSystem GKIVandGKIVPlusGas:DualElementGKIVPlusDiesel:Dry,twostage

CoolingSystem GKIVandGKIVPlusGas:AircooledGKIVPlusDiesel:Pressurized,sealedcoolingsystem;coolantcapacity:3qt.(2.85L)

FuelCapacity 8gal.(31L)

Speed (Maximum)


Transport 6.6mph(10.6km/h)




ReelDrive Geartypehydraulicmotor;backlapcontrolstandard

ReelLift Hydraulic,doubleactioncylinders

HydraulicSystem 5gal.(18.9L)capacity;20-micron,fullflowfiltration;biodegradablefluid


Tires 18x9.5-8,2-ply,pneumatic,tubeless

ParkingBrake Internalexpanding,handoperated

GroundPressure 10psi(0.7kg/cm2)

Steering GKIV:ManualGKIVPlusGasandGKIVPlusDiesel:Power


Weight(lesscatchers) GKIV:1068lbs.(484.4kg)GKIVPlusGas:1073lbs.(486.7kg)GKIVPlusDiesel:1174lbs(532.5kg)

Length 87.5in.(2.22m)

HeightwithROPS 78in.(1.98m)


Width 70in.(1.78m)inmowmode;50.5in.(1.27m)intransportmode

Reels and Blades

NumberandSize Three22in.(56cm)reels;5in.(12.7cm)diameter


BladeMaterial Hardened,high-carbonsteel

CuttingFrequency 0.053in./mph(0.836mm/kph)with11bladereels


HeightofCutRange(de-pendingonturfcondition,reelwearandbedknifeinstalled)

0.062-0.438in.(1.6-11.1mm)

ReelWeights 7blade:55lbs.(25.1kg)9blade:58lbs.(26.1kg)11blade:55lbs.(24.9kg)

SPECIFICATIONS


GREENS KING® IV/IV Plus



©2012Jacobsen,ATextronCompany/TextronInnovationsInc.Allrightsreserved.1016/C/MAR2012



TTTTThhhheeeee MMMMMMooooosssssttttt PPPPPPPPrrrrrrreeeeeeecccccciiiiissssssiiiiiiooooooonnnnnnn EEEEEnnnnnnggggggiiiinnnnnneeeeeeeeeeeerrrrreeeeedddddd RRRRRRRRRRRRRRRRRRRRRRRReeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeellllllllllllllllllllllsssssssssssssssssssssssss iiiiinnnnn ttttthhhhheeee WWWWWWoooorrrrrlllldddd™™™™™™

NNNNNNoooowwwww FFFFFeeeeeaaaaatttttuuuurrrreeee AAAAAAAAAAAAAAAAAAAAAAAAAAAddddddddddddddddddddddddvvvvvvvvvvvvvvvvvvvvvvaaaaaaaaaaaaaaaaaaaaaaaannnnnnnnnnnnnnnnnnnnnncccccccccccccccccccceeeeeeeeeeeeeeeeeeeeeeeeedddddddddddddddddddddddddd RRRRRRRRRRRRRRRRRRRRRRRReeeeeeeeeeeeeeeeeeeeeelllllllllllllllllllllliiiiiiiiiiiiiiiiieeeeeeeeeeeeeeeeeeeeeefffffffffffffffffffff TTTTTTTTTTTTTTTTTTTTTTTTTTTTTeeeeeeeeeeeeeeeeeeeeeeccccccccccccccccccccccccchhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnooooooooooooooooooooooooooooooooooollllllllllllllllllllllllllllllllllllllllloooooooooooooooooooooooooooooooooooooooooooooooooogggggggggggggggggggggggggggggggggggggggggggggggggyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy™™ ™ ™ ™™™™ ™ ™™™™™™ ™ ™™™™™™™™™™™

CLASSIC XP™ CUTTING SYSTEM™

LF-3800™ Eclipse™ 122

SLF-1880™ G-Plex™ III

Greens King™ IV

PROVEN DESIGN

The Jacobsen® cutting system was designed from the ground up for perfect geometry and

superior turf conditions. Sixty-seven points of unique geometry have been perfected over tthe

last 30 years at PGA tournaments world-wide. The interplay between the frame, reels, bedknives,

pull points, rake to blade angles and many other features are the reason why Jacobsen®

is number one in quality of cut in the market.

ADVANCED RELIEF TECHNOLOGY™

The Jacobsen® Classic XP™ Reels now feature Advanced Relief Technology™ that provides

increased durability, reduced wear and extended life. The Advanced Relief Technology™

edge allows you to maintain sharper reels with less labor. All reels now have a relief angle

of 45 degrees which signifi cantly extends the life of the blade prior to your fi rst spin

grind. Also, the face angle of the blade has been optimized for less wear and abrasion.

The Jacobsen® grinding process yields the best blade surface and delivers up to three

times more spin grinds than generic aftermarket blades.

PRECISION ENGINEERING AND TUNING

The Jacobsen® Classic XP™ Reels also feature the ultimate standard in precision with tighteer

tolerances through fl atness and run-out (concentricity). Flatter reel blades eliminate the neeed to

re-grind and reduce overall set-up time. The run-out defi nes the reels’ ability to stay true aand

maintain consistent rotation within its center point. Jacobsen® holds the tightest and mostt

consistent specifi cation for run-out.

Advanced Relief Technology™ represents the next evolution of performance.

Welded steel frames outperform fastenertype designes that loosen and rattle.

Each reel is inspected by skilled professionals to tolerances of 0.0015.

Jacobsen investedmore than $1.5 million into advance relief technology systems.

Category Feature Benefi t

Maintenance Reels are fl atter and have truer run-out Requires less set-up time

Maintenance Blades are more durable Reels don’t wear as fast, reducing periodic adjustmentsUsers get up to 3 times as many spin-grinds before exhausting the relief aangle

Maintenance With improved geometry the blade stays wider longer Bedknife life is increased

Quality of Cut Blades stay sharper longer High quality of cut is maintained for longer periods of time because the reeels stay in adjustment longer (less wear)

Quality of Cut Reels are fl atter, have less taper and greater run-out High quality of cut maintained for longer periods of time across the width of the reel

Power Requirements With improved geometry the blade stays wider longer Thinner tip reduces friction, subsequently reducing power requirements

PERFORMANCE ADVANTAGES

JACOBSEN® CLASSIC XP® ™ CUTTING SYSTEM

THE JACOBSEN® CLASSIC XP™ REEL DIFFERENCE

Two of the most important ways to measure critical dimensions for reels are run-out and fl atness. Run-out is a measure of how true the reel is to holding a perfect cylindrical shape (less is better). Flatness is the measure of parallelism of the reel face to the bedknife. A reel that is more true out of the box will take less time to setup and last longer because it requires less grinding to bring it into shape.

We measured a random sample of reels from 3 competitors. Here is what we found.

• Run-out: The next closest competitor(on average) had 10 times more run-out than the Jacobsen reel. The Jacobsen® reel wasthe only reel that could hold a variance of less than .001 (inches) – every time!

• Flatness (across the bedknife): 100% ofJacobsen’s reels were fl at to the bedknives to less than .001 inch (one on thousandth of an inch); no other sample competitor reelcame within 20% of that tolerance.

Non-Jacobsen reels were not only found to have lower average numbers for fl atness and run-out, but the amount of variation was muchlarger than a Jacobsen reel. So while you mayget one non-Jacobsen reel among fi ve that are within specifi cation, the remaining reels could be very, very bad.

Of cial Supplier of Turf CareMaintenance Equipment

PROUDMEMBER

The Of cial Turf Equipment Supplier to The PGA of America and The Exclusive Turf

Equipment Supplier to PGA Golf Properties.This information was correct at the time it was printed. Information is subject to change without notice.©March 2009, Jacobsen, A Textron Company. All rights reserved. 4199800/4000/CG/REV#2/MAR2009

REPLACEMENT REEL CYLINDERS

JACOBSEN® CLASSIC XP® ™CUTTING SYSTEM

1.888.922.turf or www.jacobsen.com

+.0015

Diameter(inches)

Width(inches)

Numberof Blades

PartNumber

Application

5 18 11 Blade 4170202 Eclipse 118/118F

5 18 11 Blade 5000095 GK518

5 18 8 Blade 4119512 SLF-1880

5 18 11 Blade 4119513 SLF-1880

5 22 11 Blade 5000148 GK522

5 22 9 Blade 2500575 PGM22

5 22 11 Blade 5002605 PGM22

5 22 9 Blade 5001099 GK IV (Left), G-Plex III, E-Plex

5 22 9 Blade 5001100 GK IV (Right), GK V, GK VI

5 22 11 Blade 5001101 Eclipse 122F, GK IV (Left),G-Plex III, E-Plex

Diameter(inches)

Width(inches)

Numberof Blades

PartNumber

Application


5 22 11 Blade 4172945 Eclipse 122, E-Walk

5 26 7 Blade 4170203 Eclipse 126

5 26 11 Blade 5000416 GK526

5 26 7 Blade 5003652 GK526

5 22 7 Blade 5003053 G-Plex III, E-Plex, LF-128 (Left),LF-3400 (Left), LF-4675 (Left)

5 22 7 Blade 5003054 GK V, GK VI, LF-128 (Right), LF-3400 (Right), LF-4675 (Right)

7 22 9 Blade 2810471 LF-135, LF-3800, LF-4677

7 22 11 Blade 2810472 LF-135, LF-3800, LF-4677

THE ADVANCED RELIEF TECHNOLOGY DIFFERENCE

45˚ Relief Angle: Users get up to 3 times more spin grinds with thisaggressive new blade design.

High quality of cut is maintainedfor longer periods of time due to superior run-out.

AAdddvvaanccceeeded Relief TeTececechnnoooloogggyyyy™™ wwiwilw l backlap

fasasssteerrr aannnndddd ccccaaaause less wear ttototo to ththethet cutting system.

Jacobsen reels are fl at to the bedknifeto less than .001 inch.

Improved Angles Increased Durability Tighter Tolerance

Each blade is individually ground for better processcontrol and consistency in quality of cut.

AFTERMARKETREEL BLADE

JACOBSENREEL BLADE

Dark spots on the aftermarket blade indicate overheating during the grinding process. With overheating, the metal is prone to “fl ake off,” resultingin early failure. Advanced Relief TechnologyTM prevents overheating, which extends blade life.

JACOBSEN ANGLE

OTHERS

45˚

BEDKNIFE

JACOBSEN ANGLE

OTHERS

BEDKNIFE15˚

1515˚5˚15 FaFaaacce Angle: Eliminates the need foforff grinding before installation.

TThThiT s new angle also allows the reel bblablablaladde to stay sharp signifi cantly longer.


THE JACOBSEN® CLASSIC XP™ REEL DIFFERENCE

Two of the most important ways to measure critical dimensions for reels are run-out and fl atness. Run-out is a measure of how true the reel is to holding a perfect cylindrical shape (less is better). Flatness is the measure of parallelism of the reel face to the bedknife. A reel that is more true out of the box will take less time to setup and last longer because it requires less grinding to bring it into shape.

We measured a random sample of reels from 3 competitors. Here is what we found.

• Run-out: The next closest competitor(on average) had 10 times more run-out than the Jacobsen reel. The Jacobsen® reel wasthe only reel that could hold a variance of less than .001 (inches) – every time!

• Flatness (across the bedknife): 100% ofJacobsen’s reels were fl at to the bedknives to less than .001 inch (one on thousandth of an inch); no other sample competitor reelcame within 20% of that tolerance.

Non-Jacobsen reels were not only found to have lower average numbers for fl atness and run-out, but the amount of variation was muchlarger than a Jacobsen reel. So while you mayget one non-Jacobsen reel among fi ve that are within specifi cation, the remaining reels could be very, very bad.


PROUDMEMBER


Equipment Supplier to PGA Golf Properties.This information was correct at the time it was printed. Information is subject to change without notice.©March 2009, Jacobsen, A Textron Company. All rights reserved. 4199800/4000/CG/REV#2/MAR2009

REPLACEMENT REEL CYLINDERS

JACOBSEN® CLASSIC XP® ™CUTTING SYSTEM


+.0015

Diameter(inches)

Width(inches)

Numberof Blades

PartNumber

Application

5 18 11 Blade 4170202 Eclipse 118/118F

5 18 11 Blade 5000095 GK518

5 18 8 Blade 4119512 SLF-1880

5 18 11 Blade 4119513 SLF-1880

5 22 11 Blade 5000148 GK522

5 22 9 Blade 2500575 PGM22

5 22 11 Blade 5002605 PGM22

5 22 9 Blade 5001099 GK IV (Left), G-Plex III, E-Plex


5 22 11 Blade 5001101 Eclipse 122F, GK IV (Left),G-Plex III, E-Plex

Diameter(inches)

Width(inches)

Numberof Blades

PartNumber

Application


5 22 11 Blade 4172945 Eclipse 122, E-Walk

5 26 7 Blade 4170203 Eclipse 126

5 26 11 Blade 5000416 GK526

5 26 7 Blade 5003652 GK526

5 22 7 Blade 5003053 G-Plex III, E-Plex, LF-128 (Left),LF-3400 (Left), LF-4675 (Left)

5 22 7 Blade 5003054 GK V, GK VI, LF-128 (Right), LF-3400 (Right), LF-4675 (Right)

7 22 9 Blade 2810471 LF-135, LF-3800, LF-4677

7 22 11 Blade 2810472 LF-135, LF-3800, LF-4677

GREENS MANAGEMENT SYSTEM

When Performance Matters.™

THE JACOBSEN® GREENS MANAGEMENT ADVANTAGE

Jacobsen® offers a complete cutting and turf management system that is proven to yield superior playing conditions and improved turf health.

Your golfers will enjoy greens that are more consistent from hole to hole. Best of all, your greens will be more resilient to ball-mark damage, foot traffi c and require less water and chemical treatment because plants are stronger. Each piece of the Greens Management System plays an important role in golf course maintenance. You have tools at your fi ngertips to handle whatever the weather and golf course should require.

Classic XP™ ReelsProven Design – The Jacobsen® cutting system was designed from the ground up for perfect geometry and superior turf conditions. The inter-play between the frame, reels, bedknives, pull points, rake to blade angles and many other features are the reason why Jacobsen® is number one in quality of cut in the market.

Precision Engineering and Tuning – Jacobsen® Classic XP™ Reels also feature the ultimate standard in precision with tighter tolerances through fl atness and run-out (concentricity). The run-out defi nes the reels’ ability to stay true and maintain consistent rotation within its center point. Jacobsen holds the tightest and most consistent specifi cation for run-out.

Advanced Relief Technology™ – Jacobsen® Classic XP™ Reels now feature Advanced Relief Technology™ that provides increased durability, reduced wear and extended life. The relief angle of 45 degrees and the improved face angle of the blade help to signifi cantly extend the life of the blade and optimize it for less wear and abrasion. The Jacobsen grinding process yields the best blade surface and delivers up to three times more spin grinds than generic aftermarket blades.

agnc

m

reduced wear and extended life. The relief aeduced ea a d e te ded e e e e aimproved face angle of the blade help to siof the blade and optimize it for less wear agrinding process yields the best blade surfatimes more spin grinds than generic afterm

Legendary™ BedknivesThe Genuine Difference in achieving Jacobsen's Renowned Quality of Cut – At Jacobsen, we are renowned for our quality of cut. In order to help accomplish that, we have a full line of Legendary™ bedknives that help get the height and quality of cut you are looking for time after time.

• The stamped (Jacobsen) means it’s Genuine!

• Unmatched quality-of-cut for the life of knife.

• Made of alloy or hardened carbon steel, providing longer wear and greater strength.

• Patented, austempered heat treating process provides a tougher part with minimum distortion. All bedknives distort during the heat treat process but, by controlling it, there is less stress during straightening.

• 100% straight – closer tolerances between reel and bedknife.

• 100% quality inspection – hand-inspected to guarantee quality, fi t and function.


New growth occurs from previous groomings.

Undesirable growth patterns are corrected by cutting

only the horizontal grass blades.

Turf Groomers®

Well groomed turf provides a fi rmer and faster playing surface that is “more-true” from green to green. Not only does it prune the grass plant but

it also opens up the canopy by removing thatch allowing water, seed and fertilizer to work more effectively. Unlike verticutting, turf grooming does not dig up the turf. Regular turf grooming will actually reduce the need to verticut.

TIP: When choosing roller options for a walking greens mower, also keep in mind that a heavier front roller adds more forward bias, which can help the operator track a straighter line and avoid skip cuts from bouncing the front roller. A lighter roller can help an experienced operator perform spin turns more easily.

RollersThe conditions at your course may be completely different than a course 15 minutes down the road and can change throughout the year; that’s why Jacobsen® offers a complete variety of rollers to get the cutting performance and ground following you desire. There are several types of rollers to choose from depending on the application:

Grooved Machined Aluminum Roller – Grooves let the cutting unit sit further into the turf for a more aggressive cut and improved straight-line tracking.

Grooved Machined Steel Roller – Like the grooved aluminum roller; sits further into the turf for a more aggressive cut and improved straight-line tracking. Additional weight of the steel roller makes this more aggressive than the aluminum roller.

Grooved Segmented Front Roller – Same as the grooved machined aluminum but in three segments. The three segments can rotate at different speeds, making this roller better for tight turns on clean-up passes.

Grooved Assembly Steel Disc Rollers – Wide spacing between discs make this the most aggressive roller. Appropriate for straight line mowing only.

Solid Tube Rollers – Solid tube rollers are available in light or heavy versions. Both are less aggressive than grooved rollers making them ideal for times when the turf is under stress. They are better than full length grooved rollers for tight turns on clean-up passes because solid rollers slide over the turf. The heavier roller is slightly more aggressive. Solid rollers come standard with a scraper to prevent debris build up.

ly d and can

n® offers formancece

typpeses onon:


MAGKnife™

MAGKnife™ is always sharp, easier to change out and forgiving when you hit a sprinkler head. Magnets hold the bedknife tight without time consuming screws. Whether you’re preparing for a big event or simply short on time, you can now conveniently change the blade for a sharp cut anytime. Our new trivalent coating offers increased resistance to rust and corrosion and an increased number of more powerful magnets provides a strong and consistent hold.

VerticutterFor those times in the spring and fall when you need to remove excess thatch and stolon growth, you will fi nd the Jacobsen® verticutter attachment to be the right tool. It is designed to cut into or at the soil surface to remove thatch and plant materials. Doing so allows water, oxygen and nutrients to penetrate the root zone.

SpikerSpiking greens improves air and nutrient fl ow to the root zone without time consuming aeration. The spiker assembly is a non-powered vertical blade set that penetrates the turf and soil surface to lightly aerate with minimal disruption to the playing surface.

Quick Roll™

Rolling greens improves ball roll by smoothing and fi rming the turf. The Jacobsen Quick Roll™ attachment negates the need for a dedicated roller and gets the job done signifi cantly faster than traditional walk or ride on rollers.

Power Roller BrushThe rear roller brush will ensure a consistent cutting height across the green by keeping the rear roller free of debris. This is especially useful in wet conditions.

Fine Bristle BrushThe fi ne bristle brush helps ensure an even cut. Positioned between the forward roller and the reel, the brush stands up the grass prior to being cut.

As you know, conditions vary from course to course due to climate, soil and cultural practices. For more information on how you can use the Jacobsen Greens Management System to optimize your specifi c course and maximize results, contact your local Jacobsen dealer or call 1.888.922.TURF.



PROUDMEMBER



This information was correct at the time it was printed. Information is subject to change without notice.© January 2009, Jacobsen, A Textron Company. All rights reserved. 4193860/3,000/CG/REV#2/JAN2009

Engine

Type Kubota®D1105E3-cylinder,liquidcooled,low-emissionscertifieddiesel

RatedHorsepower* 24.8hp(18.6kW)@3000rpm

Displacement 68.5cu.in.(1.12L)

AirCleaner Donaldson®drycartridgetypewithevacuator,valveandserviceindicator

CoolingSystem Pressurized,sealedcoolingsystem

Lubrication Fullypressurized


OilFilterType Full-flow,replacementspin-ontype

ElectricalSystem 12Vstarter(0.8kW);40ampalternator/regulator

Turbocharged Engine Option

Type Kubota®D1105TE3-cylinder,turbochargedliquidcooled,low-emissionscertifieddiesel

RatedHorsepower* 33hp(24.6kW)@3000rpm

Speed (Maximum)

Mowing 6mph(9.6km/h)

Transport 2WD:10.5mph(16.9km/h)4WD:6mph(9.6km/h)

Reverse 4mph(6.4km/h)

Traction and Drive

TractionSystem Variabledisplacement,hydrostaticpumpwith2high-torquedwheelmotors;4-wheeldriveavailable

ReelDrive Tandemgearpumpwith2solenoid-controlledspooltypevalves;geartypehydraulicmotorsmountedoneachreel;pressurecompensatedbacklappingstandard

ReelLift Joystickcontrol,one-touchlift/lowercontrolforallfivereels

HydraulicSystem 8gal.(30.28L)capacity;GreensCare™biodegradablehydraulicfluid;oilmonitorwithlow-oilaudiblealarmstandard

HydraulicCooling Full-flow10micronfilter


FrontTires 24x13-12tubeless

RearTires 18x9.50-8tubeless

Brakes Dynamic,through-tractionsystem

ParkingBrakes 7in.(17.8cm)disconfrontwheels

GroundPressure 6.9psi(0.475bar)

Steering Rearwheel,hydrostaticpowersteering

Reels and Blades

NumberandSize Five5in.(12.7cm)diameterx18in.(45.7cm)

NumberofBlades 8&11blades

CuttingFrequency 8blade:0.067in./mph(1.03mm/km/h)11blade:0.049in./mph(1.24mm/km/h)


Height-of-Cut(Dependingonturfcondition,reelwearandbedknifeinstalled)

0.30-0.70in.(7.62-17.78mm)Availablehigh-cutkitraisescuttingheightupto0.937(23.8mm)withhigh-cutkit,usinglow-profile,heavybedknife


Weight(fullfluids,lessoperator)

2WD:2205lbs.(1000kg)4WD:2280lbs.(1034kg)4WDTurbo:2330lbs.(1057kg)

Length 94in.(2.39m)lesscatchers

HeightwithROPS 84.5in.(2.15m)


SPECIFICATIONS




Fairway Mowers

SLF-1880TM


EQUIPPED STANDARD


3Headlights

3Suspension seat with armrest

3Backlapping


CUTTING UNITS

8 blade reel, 5 in. (12.7 cm) diameter x 18 in. (45.7 cm) FlashAttach®, including solid tube steel rear roller with scraper


Verticut reel, .75 in. (19 mm) spacing FlashAttach™

ACCESSORIES

18 in. (45.7 cm) Front rollers ranging from 2 in. (5.1 cm) to 3 in. (7.6 cm) diameter - solid or hollow tube steel, grooved assembled or machined aluminum or steel

15.5 in. (39.4 cm) narrow width solid tube steel rear roller – 2-3/16 in. (5.6 cm) diameter

Turf Groomer® - 0.5 in. (1.3 cm) spacing

Powered rear roller cleaning brush and counterweight kits

Canopy / Sunshade

Grass Catcher

High height of cut kit

Lift yoke set for Verticut cutting units


Classic XP™ reel cylinders: 8 & 11 blade

Medium section bedknives

Low profile bedknives for Tournament applications

MAGKnife™ medium section and low profile bedknives

GreensCare™ 68 and GreensCare™ Plus 68 biodegradable fluid

500 hour interval maintenance kit

SLF-1880TM

CHECK IT OUT!Scan with your smart phone to view the SLF-1880TM product page. Get app using your smartphone at i-nigma.mobi

www.jacobsen.com

Fairway Mowers

• Industry’s lightest fairway mowerdistributeslessthan7psi(0.47bar)ofgroundpressuretotheturf.Permitsoperationonwetorstressedturfsoonerinareaswhereaheavierorhighergroundpressuremachinemaycausedamage.

• Maneuverable and versatile machinetomoworverticutfairways,approaches,surrounds,greensandsportsfields.

• Narrow and durable 18 in. (45.7 cm) Classic XP™ Reels delivertruecutqualityandfollowgroundcontourswithoutscalping.

• Patented double-pivot lift arm mechanismallowsflexiblecuttingunitmovementtomaintaincontactwiththeturfforaconsistentcutevenoverundulatingterrain.

• Choice of power options,24.8hp(18.6kW)dieselor33hp(24.6kW)turbochargeddieselengine,availableforpowerwithfuelefficiencyorextrapower.

• FlashAttach® cutting unit mounting systemreducesmaintenancetimeandnotoolsarerequiredforremovalandinstallation.

Engine: Kubota® diesel and turbocharged diesel

Cutting Units: Five 5 in. (12.7 cm) diameter x 18 in. (45.7 cm)

Height of Cut: 0.30 - 0.70 in. (7.62 - 17.78 mm) High-Cut Kit Available


Dimensions:

Weight: 2WD: 2205 lbs. (1000 kg)

4WD: 2280 lbs. (1034 kg)

4WD Turbo: 2330 lbs. (1057 kg)

Length: 94 in. (2.39 m) less catchers

Height: 84.5 in. (2.15 m) with ROPS

Width: 88.5 in. (2.25 m)

SLF-1880 2WD

SLF-1880 4WD

SLF-1880 4WD Turbo

QUICK SPECS

AVAILABLE MODELS

The SLF-1880™ super-lightweight fairway mower by Jacobsen® is the lightest fairway machine on the market. The patented lift-arm mechanism allows its narrow reels to easily glide over undulating terrain leaving more attractive turf. Its extreme versatility also allows for mowing or verticutting more areas with just one machine.

SLF-1880TM equipped with 8-blade cutting units and grooved front roller.

Factory-filled with GreensCare™ Biodegradeable Hydraulic Fluid


Engine

Type Kubota®D1105E3-cylinder,liquidcooled,low-emissionscertifieddiesel


Displacement 68.5cu.in.(1.12L)






ElectricalSystem 12Vstarter(0.8kW);40ampalternator/regulator


Type Kubota®D1105TE3-cylinder,turbochargedliquidcooled,low-emissionscertifieddiesel

RatedHorsepower* 33hp(24.6kW)@3000rpm

Speed (Maximum)


Transport 2WD:10.5mph(16.9km/h)4WD:6mph(9.6km/h)


Traction and Drive

TractionSystem Variabledisplacement,hydrostaticpumpwith2high-torquedwheelmotors;4-wheeldriveavailable

ReelDrive Tandemgearpumpwith2solenoid-controlledspooltypevalves;geartypehydraulicmotorsmountedoneachreel;pressurecompensatedbacklappingstandard

ReelLift Joystickcontrol,one-touchlift/lowercontrolforallfivereels

HydraulicSystem 8gal.(30.28L)capacity;GreensCare™biodegradablehydraulicfluid;oilmonitorwithlow-oilaudiblealarmstandard

HydraulicCooling Full-flow10micronfilter


FrontTires 24x13-12tubeless

RearTires 18x9.50-8tubeless


ParkingBrakes 7in.(17.8cm)disconfrontwheels

GroundPressure 6.9psi(0.475bar)


Reels and Blades

NumberandSize Five5in.(12.7cm)diameterx18in.(45.7cm)

NumberofBlades 8&11blades



Height-of-Cut(Dependingonturfcondition,reelwearandbedknifeinstalled)

0.30-0.70in.(7.62-17.78mm)Availablehigh-cutkitraisescuttingheightupto0.937(23.8mm)withhigh-cutkit,usinglow-profile,heavybedknife



2WD:2205lbs.(1000kg)4WD:2280lbs.(1034kg)4WDTurbo:2330lbs.(1057kg)


HeightwithROPS 84.5in.(2.15m)


SPECIFICATIONS




Fairway Mowers

SLF-1880TM


EQUIPPED STANDARD


3Headlights


3Backlapping


CUTTING UNITS




ACCESSORIES

18 in. (45.7 cm) Front rollers ranging from 2 in. (5.1 cm) to 3 in. (7.6 cm) diameter - solid or hollow tube steel, grooved assembled or machined aluminum or steel

15.5 in. (39.4 cm) narrow width solid tube steel rear roller – 2-3/16 in. (5.6 cm) diameter

Turf Groomer® - 0.5 in. (1.3 cm) spacing

Powered rear roller cleaning brush and counterweight kits

Canopy / Sunshade

Grass Catcher




Classic XP™ reel cylinders: 8 & 11 blade

Medium section bedknives

Low profile bedknives for Tournament applications

MAGKnife™ medium section and low profile bedknives




LF-4677 TM

CHECK IT OUT!Scan with your smart phone to view the LF-4677TM product page. Get app using your smartphone at i-nigma.mobi

www.jacobsen.com

Fairway Mowers

• Servo-Controlled Hydroprovidessmoothanddependableoperationreducingoperatoreffortandfatigue.

• Durable and precision-welded Classic XP cutting unitsaredesignedtomoweventhetoughestgrassesandstilldeliverasmoothconsistentcutsurface.

• Simple-to-use one-touch joystickdeliversprecisecontrolofcuttingunitliftandlower.Wingreelscanberaisedindependentlyforseamlessmowingaroundobstaclesandactivewidthofcutversatilityallowingmowingwithfive,six,orsevenreels.

• FlashAttach® cutting unit mounting systemreducesmaintenancetimeandnotoolsarerequiredforremovalandinstallation.

• Standard 4-wheel drive systemdelivershillclimbingandslopetraction.

• Electronic control modulesupplieson-boarddiagnostictestingofelectricalsystem

Engine: Kubota® Turbocharged Diesel

Cutting Units: Seven, 7 in. (17.8 cm) diameter x 22 in. (56 cm)

Height of Cut: 0.375 - 1.125 in. (9.5 - 28.5 mm) Available high cut kit raises cutting height to 1.563 in. (39.7 mm)


Dimensions:

Weight: 3530 lbs. (1601 kg)

Length: 108 in. (2.74 m) less catchers

Height: 81 in. (2.06 m) with ROPS

Width: Mow: 155 in. (3.9 m); Transport: 87 in. (2.2 m)

QUICK SPECS

No other fairway mower can match the LF-4677™ by Jacobsen® in ease of use, productivity or cut quality. Achieve a consistent cut in less time on fairways or sports fields with the LF-4677’s seven Jacobsen Classic XP™ cutting units for an industry leading 139 in. (3.53 m) width of cut.

LF-4677TM equipped with cutting units and grooved front roller.



Engine

Type Kubota®V1505TE4-cycle,4-cylinder,turbochargedliquidcooled,low-emissionscertifieddiesel


Displacement 91.4cu.in.(1498cc)






ElectricalSystem 12V(0.8kW)starter;40ampalternator/regulator

Speed (Maximum)

Mowing 7mph(11km/h)

Transport 2WD:12mph(19.3km/h)4WD:7.5mph(12.1km/h)


Traction and Drive

TractionSystem Variabledisplacement,servo-controlledhydrostaticdrive;2WD:twohigh-torquewheelmotors;4WD:fourhigh-torquewheelmotors;on-demandelectricallycontrolledhydraulic4WDvalvewithconstantdownhillspeedanddownhillautoshiftto2WD

ReelDrive 3-sectiongearpumpwithquickdisconnectcoupledreelmotors,solenoidcontrolledmowvalve

ReelLift Joystickcontrol,one-touchlift/lowercontrolforallsevenreels;Wingreelscanbecontrolledindependently

HydraulicSystem 14gal.(53L)capacity;GreensCare™biodegradablehydraulicfluid;oilmonitorwithlow-oilalarmstandard

HydraulicCooling Hydraulicoilcooler;largevolume,full-flow10micronfilter


FrontTires 26.5x14.0-12tubeless

RearTires 20.0x10.0-8tubeless


ParkingBrakes 9.25in.(23.5cm)disconfrontwheels


Reels and Blades

NumberandSize Seven,7in.(17.8cm)diameterx22in.(56cm)

NumberofBlades 11heavysectionfairwayblades9heavysectionfairwayblades


OverallCuttingWidth 139in.(3.53m)with7-reelsactive6-reelsactive:119in.(3.03m)or5-reelsactive:100in.(2.54m)

Height-of-Cut(Dependingonturfcondition,reelwear,andbedknife)

0.375-1.125in.(9.5-28.5mm)Availablehighcutkitraisescuttingheightto1.563in.(39.7mm)


Weight(fullfluids,lessoperator) 3530lbs.(1601kg)


Height 81in.(2.06m)withROPS

Width Mow:155in.(3.9m)with7-reels;Transport:87in.(2.2m)

SPECIFICATIONS




Fairway Mowers

LF-4677 TM


EQUIPPED STANDARD


3Headlights


3Onboard electronic light diagnostics

3Backlapping


CUTTING UNITS

9 blade reel, 7 in. (17.8 cm) diameter x 22 in. (56 cm) FlashAttach®, including 2.5 in. (5.4 cm) solid tube steel rear roller with scraper

11 blade reel, 7 in. (17.8 cm) diameter x 22 in. (56 cm) FlashAttach, including 2.5 in. (5.4 cm) solid tube steel rear roller with scraper

Verticut reel, 1 in. (2.5 cm) spacing FlashAttach

ACCESSORIES

22 in. (56 cm) Front rollers ranging from 2 in. (5.1 cm) to 3 in. (7.6 cm) - solid tube steel, grooved assembled or machined aluminum or steel

Front roller scraper for 3 in. (7.6 cm) grooved steel front roller

Turf Groomer®


Canopy / Sunshade

Grass Catcher



Hood locking latch (required for CE)

Ball cage: 6 post ROPS, canopy, golf ball mesh surround


Classic XP Reels: 9 & 11 blade

Heavy and medium section bedknives

MAGKnife™ heavy and medium section bedknives

GreensCare 68 and GreensCare Plus 68 biodegradable fluid



Jacobsen’s LF550/570 lightweight fairway mowers offer industry leading productivity and functionality through programmable controls, increased performance and simplified maintenance.

QUICK SPECS

Engine: Kubota® diesel and turbocharged diesel

Cutting Units: LF550™ - Five 5 in. x 22 in. (12.7 cm x 55.9 cm) LF570™ - Five 7 in. x 22 in. (17.8 cm x 55.9 cm)

Height of Cut: LF550™ - 0.375-0.75 in. (9.5-19 mm) LF570™ - 0.375-1.125 in ( 9.5-28.5 mm) High Cut Kit Available


Dimensions: Weight: 2242-2421 lbs. (1017-1098 kg) depending on model, with reels down and full fluids Length (less catchers): 108 in. (2.74 m) Height (with ROPS): 88 in. (2.23 m) Width: 115 in. (2.92 m)

LF550/570TM

Fairway Mowers

www.jacobsen.com

WATCH IT!Scan with your smart phone to watch video of the LF570

Get app using your smartphone at i-nigma.mobi

LF570TM4WD shown with TurfGroomer


ConTroLS oPTIMIzED• InCommandTM Control System console delivers the industry’s only

passcode-protected, programmable max transport and mow speed settings to control cut frequency - removing tools and operator input from the equation.

PErForMAnCE MAxIMIzED• Jacobsen Classic XP™ Reels provide the industry’s highest quality of cut

and superior after cut appearance.

• SureTrac™ 4WD system transfers power from the slipping front wheel to the opposite rear wheel providing superior traction for hill climbing and side slopes.

MAInTEnAnCE SIMPLIFIED• Industry’s only active monitoring and full-text diagnostics read-out that

identifies fault or open circuits. No additional flashing lights to decode or tools required.

EQUIPPED STAnDArD

3 Cruise control

3 ROPS with seat belt

3 Headlights

3 Suspension seat with armrest

3 Onboard diagnostics console

3 Backlapping valves

3 GreensCare™ biodegradable hydraulic fluid

LF550 CUTTInG UnITS

7 blade, 5 in. (12.7 cm) diameter x 22 in. (55.9 cm) FlashAttach™, including 2 in. (5.1 cm) solid tube steel rear roller with scraper


LF570 CUTTInG UnITS

9 blade reel, 7 in. (17.8 cm) diameter x 22 in. (55.9 cm) FlashAttach™, including 2.5 in. (6.35 cm) solid tube steel rear roller with scraper

11 blade reel, 7 in. (17.8 cm) diameter x 22 in. (55.9 cm) FlashAttach™, including 2.5 in. (6.35 cm) solid tube steel rear roller with scraper

Verticut reel, 1 in. (2.5 cm) spacing

ACCESSorIES

22 in. (55.9 cm) Front rollers ranging from 2 in. (5.1 cm) to 3 in. (7.6 cm) - solid tube steel, grooved assembled or machined aluminum or steel

TurfGroomer®


Canopy/Sunshade

Grass Catcher


Premium air suspension seat

LED operator platform light kit

Hood locking latch (required for CE)

Ballcage, cab, air conditioner, and heater

GEnUInE SErVICE PArTS

Classic XP Reels (LF550: 7 blade) (LF570: 9 or 11 blade)

Heavy and medium section bedknives

MAGKnife™ heavy and medium section bedknives



ProDUCT ConFIGUrATIon

LF550/570TM

CANOPY/SUNSHADE

AVAILAbLE MoDELS

LF5502wd

LF5504wd

LF5504wdturbo

LF5702wd

LF5704wd

LF5704wdturbo

PowErEdrEArroLLINGCLEANINGbruSH

.

turFGrooMEr®


Exclusive electronic controlled hydroprovides smooth operation through controlled acceleration and deceleration, helping prevent wheel spin and increase comfort.

Activate monitoring system provides full text diagnostics making it easy to monitor and maintain.

SureTractM 4WD parallel-cross series system is factory installed on 4WD models and provides superior traction and climbing ability.Exclusive automatic wet parking

brakes are maintenance-free and reduce cost of ownership; no linkage, cables, pads, or disks to service, maintain or adjust.

Hard tubing with bulkhead fittings to hoses make long-term maintenance easier, with fewer service parts to stock.

FlashAttach™ Reel Mounting System allows for quick reel removal.

Classic XP™ Reels within solid built steel cutting units feature Advance Relief TechnologyTM provide increased durability, reduced wear and extended life.

BIO

D

EGRADABLE FLU

ID


Routine service items, including spin-on filters, are all easily accessible and under-the-hood. There’s no need for a lift, a flip up seat or to gain access under the machine.

InCommandtM Control System console puts controls ergonomically within reach on the armrest. Includes a full text LCD display, one-touch joystick, electronic cruise control, storage bin and 12V power outlet.

Programmable max mow and transport speeds can be set by the superintendent to ensure consistent cut regardless of operator.

LF570TM4WD shown with TurfGroomer




*Engine horsepower is provided by engine manufacturer. Actual operating power output may vary due to conditions of speci�c use.

Engine

Type Kubota® V1505E 4-cycle, 4-cylinder, liquid cooled, low-emissions-certi�ed diesel

Rated Horsepower* 35.5 hp (26.5 kW) @ 3000 rpm

Displacement 91.4 cu. in. (1498 cc)

Air Cleaner Donaldson® dry cartridge type with evacuator, valve and service indicator

Cooling System Pressurized, sealed cooling system

Lubrication System Fully Pressurized

Fuel Capacity 17 gal. (64.4 L)

Oil Filter Type Full-�ow, replacement spin-on type

Electrical System 12 V (0.8 kW) starter; 40 amp alternator/regulator


Type Kubota® V1505TE 4-cycle, 4-cylinder, turbocharged liquid-cooled, low-emissions-certi�ed diesel

Horsepower 44.2 hp (32.9 kW) @ 3000 rpm

Mowing 8 mph (12.9 km/h)

Transport 12 mph (19.3 km/h)

Reverse 5 mph (8.1 km/h)

Traction Drive Variable displacement, electronically controlled hydrostatic drive; 4WD models: SureTrac™ parallel-cross-series traction system

Reel Drive 3-section gear pump with quick disconnect coupled reel motors, solenoid controlled mow valve

Reel Lift Joystick control, one-touch lift/lower control for all �ve reels

Hydraulic System 14 gal. (53 L) capacity; GreensCare™ biodegradable hydraulic �uid; oil monitor with low-oil alarm standard

Hydraulic Cooling Hydraulic oil cooler; large volume, full-�ow 10-micron �lter

Front Tires 26.5 x 14.0 - 12 tubeless

Rear Tires 18 x 9.50 - 8 tubeless

Brakes Dynamic, through traction system

Parking Brake Automatic wet park brake integrated in front wheel motors

Steering Rear-wheel, hydrostatic power steering

Number and Size LF550: Five 5 in. (12.7 cm) diameter x 22 in. (55.9 cm) LF570: Five 7 in. (17.8 cm) diameter x 22 in. (55.9 cm)

Number of Blades LF550: 7 heavy section fairway blades LF570: 9 or 11 heavy section fairway blades

Cutting Frequency LF550: 7 blade - 0.074 in./mph (1.88 mm/km/h) LF570: 9 blade - 0.079 in./mph (2.02 mm/km/h)11 blade - 0.065 in./mph (1.65 mm/km/h)

Overall Cutting Width 100 in. (2.54 m)

Height-of-Cut (Dependingon turf condition, reel wear and bedknife installed)

LF550: 0.375 - 0.75 in. (9.5 - 19.0 mm) Available high-cut kit raises cutting height to 1.187 in. (30.2 mm)


Weight with Reels Up(full �uids, less operator)

LF550 2WD: 2837 lbs. (1287 kg) LF550 4WD: 2961 lbs. (1343 kg)LF550 4WD Turbo: 2974 lbs. (1349 kg)

LF570 2WD: 3135 lbs. (1422 kg)LF570 4WD: 3247 lbs. (1473 kg)LF570 4WD Turbo: 3285 lbs. (1490 kg)

Weight with Reels Down(full �uids, less operator)


LF570 2WD: 2271 lbs. (1030 kg)LF570 4WD: 2383 lbs. (1081 kg) LF570 4WD Turbo: 2421 lbs. (1098 kg)

Length (less catchers) 108 in. (2.74 m)

Height (with ROPS) 88 in. (2.23 m)

Width Mow: 115 in. (2.92 m); Transport: 87 in. (2.2 m)


Reels and Blades


Traction and Drive

Speed (Maximum)

SPECIFICATIONS

*Enginehorsepowerisprovidedbyenginemanufacturer.Actualoperatingpoweroutputmayvaryduetoconditionsofspecificuse.NotE:Specifications,whilecorrectattimeofprinting,maychangewithoutnotice.

LF550/570TMFairway Mowers



*Engine horsepower is provided by engine manufacturer. Actual operating power output may vary due to conditions of speci�c use.

Engine

Type Kubota® V1505E 4-cycle, 4-cylinder, liquid cooled, low-emissions-certi�ed diesel

Rated Horsepower* 35.5 hp (26.5 kW) @ 3000 rpm


Air Cleaner Donaldson® dry cartridge type with evacuator, valve and service indicator

Cooling System Pressurized, sealed cooling system

Lubrication System Fully Pressurized


Oil Filter Type Full-�ow, replacement spin-on type

Electrical System 12 V (0.8 kW) starter; 40 amp alternator/regulator


Type Kubota® V1505TE 4-cycle, 4-cylinder, turbocharged liquid-cooled, low-emissions-certi�ed diesel

Horsepower 44.2 hp (32.9 kW) @ 3000 rpm

Mowing 8 mph (12.9 km/h)


Reverse 5 mph (8.1 km/h)

Traction Drive Variable displacement, electronically controlled hydrostatic drive; 4WD models: SureTrac™ parallel-cross-series traction system

Reel Drive 3-section gear pump with quick disconnect coupled reel motors, solenoid controlled mow valve

Reel Lift Joystick control, one-touch lift/lower control for all �ve reels

Hydraulic System 14 gal. (53 L) capacity; GreensCare™ biodegradable hydraulic �uid; oil monitor with low-oil alarm standard

Hydraulic Cooling Hydraulic oil cooler; large volume, full-�ow 10-micron �lter

Front Tires 26.5 x 14.0 - 12 tubeless

Rear Tires 18 x 9.50 - 8 tubeless

Brakes Dynamic, through traction system

Parking Brake Automatic wet park brake integrated in front wheel motors

Steering Rear-wheel, hydrostatic power steering

Number and Size LF550: Five 5 in. (12.7 cm) diameter x 22 in. (55.9 cm) LF570: Five 7 in. (17.8 cm) diameter x 22 in. (55.9 cm)

Number of Blades LF550: 7 heavy section fairway blades LF570: 9 or 11 heavy section fairway blades

Cutting Frequency LF550: 7 blade - 0.074 in./mph (1.88 mm/km/h) LF570: 9 blade - 0.079 in./mph (2.02 mm/km/h)11 blade - 0.065 in./mph (1.65 mm/km/h)


Height-of-Cut (Dependingon turf condition, reel wear and bedknife installed)



Weight with Reels Up(full �uids, less operator)

LF550 2WD: 2837 lbs. (1287 kg) LF550 4WD: 2961 lbs. (1343 kg)LF550 4WD Turbo: 2974 lbs. (1349 kg)


Weight with Reels Down(full �uids, less operator)


LF570 2WD: 2271 lbs. (1030 kg)LF570 4WD: 2383 lbs. (1081 kg) LF570 4WD Turbo: 2421 lbs. (1098 kg)

Length (less catchers) 108 in. (2.74 m)


Width Mow: 115 in. (2.92 m); Transport: 87 in. (2.2 m)


Reels and Blades


Traction and Drive

Speed (Maximum)

SPECIFICATIONS

*Enginehorsepowerisprovidedbyenginemanufacturer.Actualoperatingpoweroutputmayvaryduetoconditionsofspecificuse.NotE:Specifications,whilecorrectattimeofprinting,maychangewithoutnotice.

LF550/570TMFairway Mowers


AR-3TM

CHECK IT OUT!Scan with your smart phone to view the AR-3TM product page. Get app using your smartphone at i-nigma.mobi

www.jacobsen.com

Engine: Kubota® Diesel

Cutting Deck: Three TrimTek 27 in. (68.6 cm) rotary mulching/rear discharge decks

Height of Cut: 0.75 – 3.5 in. (6 – 89 mm)

Width of Cut: 67.5 in. (1.71 m)

Weight and Dimensions:


Length: 123 in. (3.12 m)

Height with OPS: 71.7 in. (1.82 m)

Width: 74.5 in. (1.89 m)

QUICK SPECS

Trim Mowers

The AR-3™ rotary deck trim mower is ideal for maintaining golf bunker and tee surrounds, sports fields and other specialty grounds areas. TrimTek™, fully floating and articulating, rotary decks offer the ability to mulch or rear discharge clippings from the same deck. The full-time all wheel drive traction, on-demand weight transfer control and reliable braking allow operators to mow with confidence and tackle tough terrain.

• Revolutionary TrimTek decks with exclusive downdraft bladekeepclippingssuspendedlongerforexceptionalmulchingresults.

• Exclusive three-tiered discharge openingdistributesclippingsmoreevenlyforasuperiorafter-cutappearance.Bladescounter-rotatetoensuregrassclippingsarenotdispersedintobunkersorwaterways.

• Durable rear rollerscreateappealingstripingeffectforprecisiontrimmingperformanceresemblingareelmowerinanall-aroundrotary–agreatassetforcustomersthatdesireaprofessional,stripedappearance.

• Parallel-Series 3WD traction systemprovidesexceptionalclimbingabilityandgriponhillyterrainensuringawheelwillkeepfootingandmaintainproductivity.

•Oil-immersed maintenance free parking brakesdeliversafebrakingoneventhesteepestofslopesandreducetotalcostofownershipwithnolinkagesorpadstoserviceoradjust.



Engine

Type Kubota®D1105-TE3-cylinder,turbochargeddiesel

RatedHorsepower* 32.8hp(24.5kW)at3000RPM


AirCleaner Drycartridgetype

CoolingSystem Pressurized,sealedcoolingsystem;coolantcapacity:1.4gal.(5.3L)

Lubrication Pressurizedsystemwithreplaceablefullflowfilter


OilFilterType Replaceablespinontype


Speed (Maximum)


Transport 8.7mph(14km/h)

Reverse 3.7mph(6km/h)

Traction and Drive

TractionSystem Parallel-series,full-time3WD

DeckDrive Fixeddisplacementhydraulic

HydraulicSystem 6.6gal.(25L)capacity;hydraulicoilmonitorandhornalarm;GreensCarebiodegradableoil


FrontTires 20x12-10TurfTrac4-ply

RearTires 20x10-8TurfTrac4-ply

ServiceBrakes Dynamicbrakingthroughhydrostaticdrive

ParkingBrake Hydraulicwetparkbrakesintegratedinthefrontwheelmotors

Steering Hydraulicpowersteeringwithtiltwheel

Decks and Cutting Units

NumberandSize Three27in.(68.6cm)rotarymulching/reardischargedecks

Construction Heavy-duty,welded7-gaugespundeck

CuttingUnitLift Joystickactuatedonetouchlift/lower

WeightTransfer Adjustablehydraulicweighttransfer-electronicallyactivatedatoperatorcontrols

BladeMaterial Hardened,carbonsteelalloy

Motor/Spindle Fixeddisplacement,self-lubricatingwith1in.(2.54cm)diametershaft;doublesealedbearings

HeightofCut 0.75-3.5in.(6-89mm)in0.25in.(6mm)increments;notoolsrequiredforadjustment

CuttingCapacity 4.1acres/hr(1.7ha/hr)

OverallCuttingWidth 67.5in.(1.71m)


Weight 2293lbs.(1040kg)

Length 123in.(3.12m)

HeightwithOPS 71.7in.(1.82m)



SPECIFICATIONS




Trim Mowers

AR-3TM


EQUIPPED STANDARD

3Operator Protection Structure (OPS) with seat belt

3Parallel-Series 3WD

3Three TrimTek™ cutting decks with lift arms for 67.5 in. (1.71 m) width of cut

3TrimTek decks with rotary mulching and rear discharge positions

3GreensCare™ biodegradable hydraulic fluid

ACCESSORIES

Work lights / Headlights

Canopy / Sunshade Kit

Lift Arm Field Kit, converts 67.5 in. (1.71 m) ma-chine to 72 in. (1.83 m) width of cut


Combination Blade

High lift blade - cool season grasses

Low lift blade - downdraft blade for extra pro-cessing of warm season grasses

Standard blade

GreensCare 46 and GreensCare Plus 46 biodegradable hydraulic fluid

Exclusive three-tiered discharge opening distributes clippings more evenly for a superior after-cut appearance.

Revolutionary new TrimTek™ deck with exclusive downdraft blade keeps clippings suspended longer for exceptional mulching results.


The TR-3TM is a world class cutting and climbing reel trim mower. It hugs contours with ease and provides Jacobsen’s legendary quality-of-cut on even the steepest of hills. The full-time all wheel drive traction, weight transfer control and reliable braking allow operators to mow with confidence and tackle tough terrain. Designed for tee boxes, approaches and surrounds where high level power and quality is needed.

TR-3TM

CHECK IT OUT!Scan with your smart phone to view the TR-3TM product page. Get app using your smartphone at i-nigma.mobi

www.jacobsen.com

Trim Mowers

• Parallel-Series 3WD traction systemprovidesgriponhillyterrainanddampworkingconditionsensuringawheelwillkeepfootingandmaintainproductivity.

• On-demand weight transfer controlallowsoperatortoshiftadditionalflowtowheelsformaximumhillclimbingpower.

• The all-out-front design with forward seating positionsuppliesoperatorwithunobstructedsightlinesofthecuttingpath.

• Heavy-duty and proven Jacobsen Classic XP™ reelsproduceexceptionalcutquality.

• Operator ergonomics and safetycomestandardwiththesmoothfoot-pedaltransmission,powersteering,adjustablesteeringwheel,high-backsuspensionseatandoperatorprotectionstructurewithseatbelt.

• Oil-immersed maintenance free parking brakesdeliversafebrakingoneventhesteepestofslopesandreducetotalcostofownershipwithnolinkageorpadstoserviceoradjust.

Engine: Kubota® diesel

Cutting Units: Three 7 in. (17.8 cm) x 26 in. (66 cm)

Height of Cut: 0.37 - 2.75 in. (9.5 - 69.8 mm)


Dimensions:


Length: 104.3 in. (2.65 m)

Height: 71.7 in. (1.82 m with OPS)

Width: 79.5 in. (2.02 m)

QUICK SPECS

TR-3 with 7 blade reel and grooved front rollers



EQUIPPED STANDARD

3Operator Protection Structure (OPS) with seat belt


CUTTING UNITS

7 blade reel, 7 in. (17.8 cm) diameter x 26 in. (66 cm), including solid tube steel rear roller (LH, RH, Center)

ACCESSORIES

26 in. (66 cm) Grooved steel front rollers (set of 3)

Grooved front roller scraper bars (set of 3)

Rear roller scraper bar

Grass catchers, gray with hardware (set of 3)

Backlap valve kit


Canopy / Sunshade


Classic XP reels: 7 & 10 blade

Heavy section Legendary™ Bedknives

Heavy section MAGKnife™

GreensCare 46 and GreensCare Plus 46 biodegradable fluid

SPECIFICATIONS




Trim Mowers

TR-3TM

PRODUCT CONFIGURATIONEngine

Type Kubota®D1105-E3-cylinderdiesel


Displacement 68.55cu.in.(1,123cc)

AirCleaner DryCartridgetype

CoolingSystem Pressurized,sealedcoolingsystem;coolantcapacity:1.4gal.(5.3L)





Speed (Maximum)



Reverse 3.7mph(6km/h)

Traction and Drive

TractionSystem Parallel-series,Full-time3WD

ReelDrive Fixeddisplacementhydraulicwithoptionalbacklap

HydraulicSystem 6.6gal.(25L)capacity;hydraulicoilmonitorandhornalarm;GreensCareTM68biodegradableoil


FrontTires Two20x12-10,TurfTrac4-ply

RearTires One20x10-8,4-ply


ParkingBrake Hydraulicwetparkbrakeintegratedinthefrontwheelmotor


Reels and Blades

NumberandSize Three7in.(17.8cm)diameter,26in.(66cm)7-bladereels

BladeMaterial Hardened,highmanganesecarbonsteel


CuttingUnitLift Joystickactuatedwithcross-cutliftposition

WeightTransfer Hydraulicallyfromreelstotractor

Height-of-Cut 0.37-2.75in.(9.5-69.8mm)

CuttingCapacity 4.4acres/hr(1.8ha/hr)at6mph(9.7km/h)




Height 71.7in.(1.82m)withOPS




Tri-King TM

CHECK IT OUT!Scan with your smart phone to view the Tri-KingTM product page. Get app using your smartphone at i-nigma.mobi

• The low and forward engine positiontransverselymountedbetweenthefrontwheelsprovidesalowcenterofgravityforsuperiorstabilityandcontour-followingability.

• On-demand 3WD parallel traction systemoffersexceptionalclimbingabilitywheninmowmodewhileconservingpowerconsumptionwhenintransport.

• Jacobsen Classic XP reelswithinthreesolidbuiltcuttingunitsprovideasuperiorcutof72in.(1.83m)or84in.(2.13m)andsupplyupto10in.(25.4cm)ofcutoutsideeachfronttire,reducingtheamountofcleanupandhandworkaroundbunkersorobstacles.

• Maneuverability, operator ergonomics and safetycomestandardwithpowersteering,adjustablesteeringwheelandoperatorprotectionstructurewithseatbelt.

www.jacobsen.com


Cutting Units: Three 7 x 26 in. (17.8 x 66 cm) or 30 in. (76 cm)

Height of Cut: 0.37 - 2.75 in. (9.5 - 69.8 mm)

Width of Cut: 72 in. (1.83 m) or 84 in. (2.13 m)

Dimensions:

Weight: 1594 lbs. (732 kg) to 1642 lbs. (745 kg)

Length (less catchers): 99 in. (2.52 m)

Height (with ROPS): 77 in. (1.95 m)

Width: 78.5 in. (1.99 m) to 90.5 in. (2.30 m)

QUICK SPECS

Trim Mowers

An industry staple for years, turf professionals have long relied on the Jacobsen Tri-King™ for reel cut quality at high heights-of-cut making it ideal for sports fields, tee boxes, approaches and surrounds. Whether it’s the mower’s Classic XP™ reels that leave a pristine finish or the unit’s superior maneuverability, smooth ride and great side-hill traction, the Tri-King gives turf professionals everything needed to mow with superior results. Factory-filled with GreensCare™

Biodegradeable Hydraulic Fluid

Tri-King™with30in.(76cm),7-bladereelsandgroovedfrontrolers


Engine

Type Kubota®D7223-cylinderdiesel



AirCleaner DryCartridgetype

CoolingSystem Pressurized,sealedcoolingsystem;coolantcapacity:3qt.(2.85L)


FuelCapacity 6.5gal.(25L)



Speed (Maximum)

Mowing 5mph(8km/h)



Traction and Drive

TractionSystem On-demand,Parallel3WD

ReelDrive Fixeddisplacementhydraulicwithstandardbacklap

HydraulicSystem 5.5gal.(21L)capacity;10micron,fullflowfiltration;GreensCare™68biodegradableoil


FrontTires Two20x10-10,tubeless

RearTires One20x10-8,tubeless


ParkingBrake Disctypeonfrontwheels;handleveractuated


Reels and Blades

NumberandSize Three26in.(66cm)or30in.(76cm)reels;7in.(17.8cm)diameterreels;7-bladereels

BladeMaterial Hardened,highmanganesecarbonsteel

OverallCuttingWidth 72in.(1.83m)with26in.(66cm)cuttingunits84in.(2.13m)with30in.(76cm)cuttingunits

CuttingUnitLift Footpedalactuated

WeightTransfer Mechanicaldownpressuresystem:transfersupto200lbs.(90.7kg)fromcuttingunitstotractor

Height-of-Cut 0.37-2.75in.(9.5-69.8mm)

CuttingCapacity 3.6acres/hrat5mph(1.46ha/hrat8km/h)with26in.(66cm)cuttingunits4.2acres/hrat5mph(1.71ha/hrat8km/h)with30in.(76cm)cuttingunits



1594lbs.(732kg)with26in.(66cm)cuttingunits1642lbs.(745kg)with30in.(76cm)cuttingunits


Height(withROPS) 77in.(1.95m)


Width 78.5in.(1.99m)with26in.(66cm)cuttingunits90.5in.(2.30m)with30in.(76cm)cuttingunits

SPECIFICATIONS



*Enginehorsepowerisprovidedbyenginemanufacturer.Actualoperatingpoweroutputmayvary duetoconditionsofspecificuse.

NOTE:Specifications,whilecorrectattimeofprinting,maychangewithoutnotice.

Trim Mowers

Tri-King TM


EQUIPPED STANDARD


3On-demand 3WD

3Backlapping

3GreensCare™ biodegradable hydraulic fluid

For 72 in. (1.83 m) Width of Cut: CUTTING UNITS & ACCESSORIES

7 blade reel, 7 in. diameter x 26 in. (17.8 cm x 66 cm), including solid tube steel rear roller (LH, RH, Center)

Verticut reel, 1 in. (2.5 cm) spacing, including solid tube steel rear and front rollers (LH, RH, Center)


26 in. (66 cm) Grooved front roller scraper bars (set of 3)

26 in. (66 cm) Rear roller scraper bar

26 in. (66 cm) Grass catchers, with hardware (set of 3)

For 84 in. (2.13 m) Width of Cut:CUTTING UNITS & ACCESSORIES

7 blade reel, 7 in. diameter x 30 in. (17.8 cm x 76 cm), including solid tube steel rear roller (LH, RH, Center)


30 in. (76 cm) Grooved front roller scraper bars (set of 3)

30 in. (76 cm) Rear roller scraper bar

30 in. (76 cm) Grass catchers, with hardware (set of 3)

COMMON ACCESSORIES


Canopy / Sunshade

Arm Rest Kit

600 rpm Reel Kit


Classic XP reels: 26 in. (66 cm) 7 & 10 blade; 30 in. (76 cm) 5 & 7 blade

Heavy section Legendary™ Bedknives

Heavy section MAGKnife™



AR-522TM

CHECK IT OUT!Scan with your smart phone to view the AR-522TM product page. Get app using your smartphone at i-nigma.mobi

The AR-522 is a 5-gang mower that leads the industry in climbing, mulching and cutting capabilities. It is ideal for intermediate golf course roughs, green and tee surrounds and can also be used in regularly maintained sports turf and park and recreation environments.

• Revolutionary TrimTek™ deck design with exclusive downdraft bladekeepsclippingssuspendedlongerforexceptionalmulchingresults.Convertfromdischargetomulchinminuteswithasinglewrench.

• Exclusive three-tiered discharge openingdistributesclippingsmoreevenlyforasuperiorafter-cutappearance.

• Increased deck volumeallowstheAR-522tocutinmoresevereconditions

• Best-in-class traction and climbing capability with on-demand weight transfer controlfromtheoperatorstationandmorehorsepowerperwidth-of-cutthananymowerinitsclass.

• Full-time parallel-series 4WD

www.jacobsen.com


Cutting Deck: Five 22 in. (55.9 cm) rotary cutting decks

Height of Cut: 0.75 – 5.25 in. (19 mm – 133 mm) in 0.25 in. (6 mm) increments

Weight and Dimensions:


Length: 130 in. (3.3 m)

Height: 83 in. (2.11 m)

Width: 98 in. (2.4 m)

QUICK SPECS

Wide-Area Rotary Mowers


Engine

Type Kubota®V2403-M-T4-cylinder,turbocharged,liquid-cooleddiesel

Horsepower* 59.0hp(44.0kW)maximum

Displacement 112cu.in.(1835cc)

AirCleaner 2-stageDonaldson®drycartridgetypewithevacuatorvalveandserviceindicator

CoolingSystem Side-by-sideradiator/hydraulicoilcooler;pressurized;8qt.(7.6L)capacity

Lubrication Fullypressurizedwithremoteengineoilcooler


OilFilterType Full-flow,replaceablespin-onremotetype

ElectricalSystem 12Vinput/outputcontroller;40-ampalternator;600CCAbattery

Speed (Maximum)

Mowing 7.0mph(11.3km/h)

Transport 10mph(16.1km/h)


Traction and Drive

TractionSystem Parallel-seriesfull-time4WD;variabledisplacement,servo-controlledhydro;fourhigh-torquewheelmotors,on-demandhydraulic4WDvalve,reverseautoshiftto2WD

DeckDrive 2-sectionpumpanddirect-cooleddeckmotors

HydraulicSystem 14gal.(53Lcapacity;hydraulicoilmonitorandhornalarm;GreensCarebiodegradablefluid;full-flow,10-micronfilter

HydraulicCooling Side-by-sideradiator/hydraulicoilcooler;pressurized;0.3gal.(1.1L)capacity,14gpm


FrontTires Two26.5x14-12,6-plyturftread

RearTires Two22.5x10-8,4-plyturftread

ServiceBrakes Dynamicbrakingfromtransmission;mechanicaldiscbrakesonfrontwheels

ParkingBrake Footoperateddiscbrakes

Steering Hydrostaticpowersteeringwithtiltwheel


NumberandSize Five22in.(55.9cm)rotarycuttingdecks

Construction 7gaugeheavydutyweldedwithpressedsteel

CasterWheels 6.25x3.25-4withsealedballbearing

CuttingUnitLift Handoperated,levercontrolledhydraulicliftsystem

WeightTransfer Adjustablehydraulicweighttransfer-electronicallyactivatedatoperatorcontrols

Blades Five22.4in.(56.8cm)heattreatedalloyblades

Motor/Spindle Fixeddisplacement,self-lubricatingwith1in.(2.54cm)diametershaft;doublesealedbearings

Height-of-Cut 0.75-5.25in.(19-133mm)in0.25in.(6mm)increments;minimaltoolsrequiredforadjustment

CuttingCapacity 6.8acresperhourat7.5mph(2.8ha/hat12km/h)


Weight and Dimension


Length 130in.(3.3m)

Height 83in.(2.11m)

Wheelbase 58in.(1.5m)

Width 98in.(2.4m)

SPECIFICATIONS





AR-522TM


EQUIPPED STANDARD


34WD

3Headlights

3Deluxe suspension seat

ACCESSORIES

Canopy/Sunshade Kit


Combo blade (standard)

High lift blade

Low lift blade

GreensCare™ 68 – 5 gal. (18.9 L) pail

GreensCare 68 – 55 gal. (208.2 L) drum

GreensCare Plus 68 – 5 gal. (18.9 L) pail


R-311T TM


CHECK IT OUT!Scan with your smart phone to view the R-311T TM product page. Get app using your smartphone at i-nigma.mobi

The R-311T™ rough mower by Jacobsen® is a cost-effective mowing solution for challenging turf found at sports fields, parks, institutional roughs and roadside areas. Reliable and easier to maintain, the R-311T is ergonomically designed to enhance the entire operator experience.

• Exceptional Cutting Performance – Powerful 59 hp turbo engine and high efficiency deck design effortlessly slices through the tallest, thickest grass creating a manicured result.

• Individual Deck Control - Individual control allows you to mow with 1, 2 or 3 decks making it easy to trim in tight spots.

• Leading Reliability - All hydraulic-driven motors on cutting decks, fewer wear parts and easy access to the engine, blades and hydraulic system make the R-311T easy to maintain.

• Superior Operator Comfort and Safety - Air suspension seat and spacious and ergonomic cockpit were all designed with operators in mind. Standard foldable ROPS keeps operators safe and allows mowing and transporting in low-height areas.

www.jacobsen.com

BIO

D

EGRADABLE FLU

ID


Engine: Kubota® Turbodiesel

Cutting Deck:

One 64 in. (1.62 m) full-floating front deck

Two 42 in. (1.07 m) full-floating wing decks

Height of Cut: 1 – 5.5 in. (2.54 – 14 cm)


Dimensions:


Length: 144 in. (3.66 m)

Height ROPS Up: 84 in. (2.13 m)

Height ROPS Down: 63.5 in. (1.61 m)

Width: 139 in. (3.53 m)

Transport Width: 93.5 in. (2.38 m)

QUICK SPECS


SPECIFICATIONS





R-311T TM


EQUIPPED STANDARD

3Foldable ROPS with seat belt

3 4WD

3 Deluxe air suspension seat

ACCESSORIES

Mulcher kit

Canopy/sunshade kit - adjustable

Light kit

Carefree tire kit


Standard blade, LH – Counterclockwise rotation

Standard blade, RH – Clockwise rotation

10W-30, 2.5 gallon (9.5L) pail, 2 pack hydraulic fluid

10W-30, 5 gallon (18.9L) pail hydraulic fluid

GreensCareTM 68 – 5 gallon(18.9L) pail hydraulic fluid

GreensCare 68 – 55 gallon (208.2L) drum hydraulic fluid

GreensCare Plus 68 – 5 gallon (18.9L) pail hydraulic fluid

THIRD-PARTY ACCESSORIES

Snow Blower

Cab

Brush/Sweeper

Front Blade

R-311T™ with cab option

Engine

Type Kubota® V2403-M-T 4-cylinder, turbocharged, liquid-cooled diesel

Horsepower* 59.0 hp (44.0 kW) maximum

Displacement 148 cu in. (2.4 L)

Peak Torque 120.7 lbs. ft (163.6 NM) @ 1800 rpm

Air Cleaner Dry type Cyclopac air cleaner with restriction indicator light

Cooling System Pressurized, sealed cooling system; coolant capacity: 8 qt. (7.6 L)

Lubrication Fully pressurized


Fuel Consumption 3.50 gal./hr. (13.2 l/hr.) at max engine loading

Oil Filter Type Full-flow, replaceable spin-on remote type

Electrical System 45 amp alternator with 12V 750 CCA battery, circuit breakers, fuses

Productivity

Cutting Time Productivity 10.4 acres (4.20 ha) per hour at 7.7 mph (12.4 km/h)

Run Time per Tank 5.7 hours at max engine loading

Speed (Maximum)

Mowing 7.7 mph (12.4 km/h)

Transport 2WD: 14.9 mph (24 km/h) 4WD: 7.8 mph (12.6 km/h)

Reverse 2WD: 6 mph (9.6 km/h) 4WD: Locked Out

Traction and Drive

Traction System Hydrostatic, closed loop system; variable displacement piston pump; fixed displacement piston motor to front limited slip differential axle with integral gear reduction; motors on rear wheel electro-hydraulically engage/disengage for selectable 2WD or 4WD

Deck Drive Hydraulic motors with integral bearings; self-lubricating

Hydraulic System 17 gal. (64.3 L) reservoir; o-ring face seal fittings; charge and return filters; suction screen at tank; oil cooler; diagnostic test ports


Front Tires 26 x 12-12 tubeless, 6-ply rated

Rear Tires 23 x 10.5-12 tubeless, 4-ply rated

Service Brakes Dynamic braking from transmission; mechanical disc brakes on front wheels

Parking Brake Foot operated disc brakes

Steering Tilt Wheel: Hydrostatic rear wheel steering


Number and Size One 64 in. (1.62 m) full-floating front deck Two 42 in. (1.07 m) full-floating wing decks

Construction 10 gauge steel with reinforcing plates, ribs, bumpers

Caster Wheels 4 x 11 pneumatic tires


Cutting Unit Lift Hand operated, individual lever controlled hydraulic lift system

Weight Transfer Hydraulic weight transfer – adjustable at operator controls

Blades Seven 23 in. (58 cm) Low Noise, Low Lift

Height-of-Cut 1 - 5.5 in. (2.54 - 14 cm)

Motor/Spindle Hydraulic motors with integral bearings; self lubricating


Weight 3974 lbs. (1803 kg)

Length 144 in. (3.66 m)

Height ROPS Up: 84 in. (2.13 m) ROPS Down: 63.5 in. (1.61 m)

Wheelbase 67.8 in. (1.72 m)

Width 139 in. (3.53 m)

Transport Width 93.5 in. (2.38 m)


HR-6010TM

CHECK IT OUT!Scan with your smart phone to view the HR-6010TM product page. Get app using your smartphone at i-nigma.mobi

The HR-6010™ is a powerful three deck rotary mower providing excellent productivity in a small footprint. This rough mower is the ideal choice for those looking after difficult golf course roughs.

• Rugged 60-hp (45kW), 4-Cylinder Diesel Engine - High-output power but operates quietly.

• Durable, Heavy-Gauge Decks With Breakaway Feature - Greater durability, reduced downtime and improved protection against damage.

• Patented, Parallel Series 4-Wheel-Drive System With Differential Lock - Excellent traction on hills with minimal turf damage during turning.

• Oil-Immersed, Zero-Maintenance Parking Brakes - Safe, positive, maintenance-free operation.

• Puncture-Free Tires on All Decks - Reduced downtime and maintenance costs.

www.jacobsen.com

Engine: Perkins® turbodiesel

Cutting Units:

One 60 in. (1.52 m) full-floating front decks

Two 40.5 in. (1.03 m) full-floating wing decks

Height of Cut: 1.14 – 4.75 in. (2.9 – 12.1 cm)


Dimensions:


Length: 122 in. (3.10 m)

Height : 53 in. (1.35 m)

Width: 127 in. (3.23 m)

Transport Width: 61 in. (1.55 m)

QUICK SPECS



SPECIFICATIONS





HR-6010TM


EQUIPPED STANDARD


3 4WD

3 Deluxe suspension seat

ACCESSORIES

Mulcher kit

Light kit for straight type ROPS


21 in. (53 cm) blade


Rotary brush

Front blades

Cab

Engine

Type Perkins® 4-cylinder, liquid-cooled, turbodiesel

Horsepower* 60 hp (45 kW)

Displacement 134.3 cu in. (2.2 L)

Air Cleaner Dry type air cleaner with dust evacuator and Top Spin™ pre-cleaner

Cooling System 1.4 gal. (5.5 L) capacity



Oil Filter Type Full-flow, replacement spin-on type

Electrical System 40 amp alternator with 12V 600 CCA battery; with 40 amp link fuses and fuse protected

Speed (Maximum)

Mowing 7 mph (11 km/h)

Transport 14 mph (22.5 km/h) in 2WD

Reverse 7.5 mph (12 km/h)

Traction and Drive

Traction System Servo-controlled variable-displacement hydraulic pump directly mounted to engine. Full time 4WD; 2WD for transport

Deck Drive Single L-L poly-section belt driven with hydraulic motors

Hydraulic System 5 gal (19 L).; dual 10-micron suction filters, charge filter and test ports

Hydraulic Cooling Hydraulic oil cooler


Front Tires 24 x 13-12 tubeless turf

Rear Tires 20 x 10-8 tubeless turf

Service Brakes Hydrostatic through traction drive

Parking Brake Wet hydraulic disc brakes; hand lever

Steering Hydrostatic rear wheel steering


Number and Size One 60 in. (1.52 m) full-floating front deck; two 40.5 in. (1.03 m) full-floating wing decks

Construction 10 gauge steel with welded 7-gauge deck skirts

Caster Wheels Two 11 x 4.0 foam-filled tires on front deck; two 9 x 3.5 foam-filled tires on wing decks


Cutting Unit Lift Hand operated, lever controlled hydraulic lift system

Weight Transfer Hydraulic automatic weight transfer up to 200 lbs. (90.72 kg) from mowing decks to tractor

Blades Seven 21 in. (53 cm) heat treated

Height-of-Cut 1.14 in. to 4.75 in (2.9 cm - 12.1 cm) in 0.26 in. (6.6 mm) increments

Motor/Spindle 1.25 in. (3.2 cm) diameter with double-sealed bearings

Cutting Capacity 9 acres/hr. at 7 mph (3.6 ha/hr at 11 km/h)



Length 122 in. (3.10 m)

Height 53 in. (1.35 m)

Wheelbase 58 in. (1.5 m)

Width 127 in. (3.23 m)

Transport Width 61 in. (1.55 m)


HR-9016T TM


CHECK IT OUT!Scan with your smart phone to view the HR-9016TTM product page. Get app using your smartphone at i-nigma.mobi

For speed and large width of cut, the HR-9016T TM Turbo by Jacobsen® is the perfect choice for maintaining roughs. This massive rotary mower offers a 192 in. (4.9 m) width of cut giving an impressive work rate of 16.5 acres per hour (6.7 hectares per hour).

• New,morepowerful99.2hp(74.0kW)Kubota®turbochargeddieselengine is more fuel efficient and quieter.

• DeluxeAdjustableAir-RideSeatWithTiltSteeringWheelandServo-ControlledHydrostat - Reduces operator fatigue, provides total operator comfort.

• EachSpindleBladePoweredbyaQuiet,Pressure- BalancedHydraulicMotor - High cutting torque; no belts or lubrication required.

• TwoOutsideDeckWingletsPivotUpto20Degrees - Reduces scalping in undulating turf.

• Heavydutybreakawaysystem protects wing decks from damage.

www.jacobsen.com

Engine: Kubota® Turbodiesel

Cutting Deck: One 92 in. (2.34 m) out-front, multi-flex front deck Two 59 in. (1.5 m) swept-forward wing decks

Height of Cut: 1 – 5.5 in. (2.54 – 14 cm)


Dimensions: Weight: 6607 lbs. (2997 kg)

Length: 174 in. (4.42 m)

Height With ROPS: 85 in. (2.16 m)

Height With Decks Raised: 94 in. (2.39 m)

Width: 198 in. (5.03 m)

Transport Width: 95 in. (2.41 m)

QUICK SPECS


SPECIFICATIONS

1.888.922.TURF|www.jacobsen.com




HR-9016T TM


EQUIPPED STANDARD


3 4WD


ACCESSORIES

Mulcher kit

Road package kit

Working light kit


Cruise control kit

Accessory harness kit

Rear steering wheel weight kit

Carefree tire kit


High lift blade

Standard blade

ISO VG68 – 5 gallon (18.9 L) pail hydraulic fluid

ISO VG68 – 55 gallon (208.2 L) drum hydraulic fluid

GreensCare 68TM – 5 gallon (18.9 L) pail hydraulic fluid

GreensCare 68 – 55 gallon (208.2 L) drum hydraulic fluid

GreensCare Plus 68 – 5 gallon (18.9 L) pail hydraulic fluid


Brush/sweeper

Front blades

Snow blower

Cab

Engine

Type Kubota® V3800T 4-cylinder, turbocharged, liquid-cooled direct-inject diesel

Horsepower* Gross: 99.2 hp (74.0 kW) @2600 rpm


Air Cleaner Dry type with evacuator valve and visual indicator

Cooling System Mid-mounted air intake grill and shielding for access to ag-type radiator; oil cooler swings out for easy service; 2.5 gal (9.5 L) capacity




Electrical System 12V automotive-type, dual battery; 1500 CCA, 55 amp alternator; seat switch, PTO, parking brake and traction neutral interlock system; overload protection

Speed(Maximum)

Mowing 4WD: 8.5 mph (13.6 km/h)


Reverse 2WD: 5.5 mph (8.9 km/h) 4WD: 3 mph (4.8 km/h)

TractionandDrive

Traction System Servo-controlled variable-displacement, hydrostatic drive to two high-torque, front-wheel motors and two high-torque rear-wheel motors; single foot-operated traction pedal with adjustable speed stop


Hydraulic System 55 gal. (208.2 L) system capacity with 33 gal. (125 L) reservoir capacity; low oil level warning system; water collection/drain plugs; filtration: 10-micron return filter and 10-micron charge system filter

Tires,BrakesandSteering

Front Tires 29 x 14-15, 12-ply turf tires

Rear Tires 24 x 12-12, 6-ply turf tires

Service Brakes Dynamic braking through hydrostatic transmission; front enclosed drum brakes; mechanical turn-assist brakes through two pedals

Parking Brake Hand lever parking brake


DecksandCuttingUnits

Number and Size One 92 in. (2.34 m) multi-flex front deck; two 59 in. (1.5 m) swept-forward wing decks; 10 gauge steel

Caster Wheels Two 13 x 6.5-6, 4-ply pneumatic on front deck Ten 11 x 4-5.0, 4-ply pneumatic on wing decks



Weight Transfer Hydraulic weight-transfer - adjustable at operator controls

Blades Front Deck: Five 21 in. (53 cm) heat treated and interchangeable Wing Decks: Three 21 in. (53 cm) heat treated and interchangeable



Cutting Capacity 16.5 acres per hour at 8.5 mph (6.7 ha/h at 13.6 km/h)

WeightandDimensions


Length 174 in. (4.42 m)

Height With ROPS: 85 in. (2.16 m) With Decks Raised: 94 in. (2.39 m)


Width 198 in. (5.03 m)


SPECIFICATIONS

1.888.922.TURF|www.jacobsen.com




HR-9016T TM


EQUIPPED STANDARD


3 4WD


ACCESSORIES

Mulcher kit

Road package kit

Working light kit


Cruise control kit

Accessory harness kit

Rear steering wheel weight kit

Carefree tire kit


High lift blade

Standard blade

ISO VG68 – 5 gallon (18.9 L) pail hydraulic fluid

ISO VG68 – 55 gallon (208.2 L) drum hydraulic fluid

GreensCare 68TM – 5 gallon (18.9 L) pail hydraulic fluid

GreensCare 68 – 55 gallon (208.2 L) drum hydraulic fluid

GreensCare Plus 68 – 5 gallon (18.9 L) pail hydraulic fluid


Brush/sweeper

Front blades

Snow blower

Cab

Engine

Type Kubota® V3800T 4-cylinder, turbocharged, liquid-cooled direct-inject diesel

Horsepower* Gross: 99.2 hp (74.0 kW) @2600 rpm


Air Cleaner Dry type with evacuator valve and visual indicator

Cooling System Mid-mounted air intake grill and shielding for access to ag-type radiator; oil cooler swings out for easy service; 2.5 gal (9.5 L) capacity




Electrical System 12V automotive-type, dual battery; 1500 CCA, 55 amp alternator; seat switch, PTO, parking brake and traction neutral interlock system; overload protection

Speed(Maximum)

Mowing 4WD: 8.5 mph (13.6 km/h)


Reverse 2WD: 5.5 mph (8.9 km/h) 4WD: 3 mph (4.8 km/h)

TractionandDrive

Traction System Servo-controlled variable-displacement, hydrostatic drive to two high-torque, front-wheel motors and two high-torque rear-wheel motors; single foot-operated traction pedal with adjustable speed stop


Hydraulic System 55 gal. (208.2 L) system capacity with 33 gal. (125 L) reservoir capacity; low oil level warning system; water collection/drain plugs; filtration: 10-micron return filter and 10-micron charge system filter

Tires,BrakesandSteering

Front Tires 29 x 14-15, 12-ply turf tires

Rear Tires 24 x 12-12, 6-ply turf tires

Service Brakes Dynamic braking through hydrostatic transmission; front enclosed drum brakes; mechanical turn-assist brakes through two pedals

Parking Brake Hand lever parking brake


DecksandCuttingUnits

Number and Size One 92 in. (2.34 m) multi-flex front deck; two 59 in. (1.5 m) swept-forward wing decks; 10 gauge steel

Caster Wheels Two 13 x 6.5-6, 4-ply pneumatic on front deck Ten 11 x 4-5.0, 4-ply pneumatic on wing decks



Weight Transfer Hydraulic weight-transfer - adjustable at operator controls

Blades Front Deck: Five 21 in. (53 cm) heat treated and interchangeable Wing Decks: Three 21 in. (53 cm) heat treated and interchangeable



Cutting Capacity 16.5 acres per hour at 8.5 mph (6.7 ha/h at 13.6 km/h)

WeightandDimensions


Length 174 in. (4.42 m)

Height With ROPS: 85 in. (2.16 m) With Decks Raised: 94 in. (2.39 m)


Width 198 in. (5.03 m)



TurfCat TM

Rough/Rotary Mowers

CHECK IT OUT!Scan with your smart phone to view the TurfCatTM product page. Get app using your smartphone at i-nigma.mobi

The Jacobsen® TurfCat™ is a multi-purpose machine that provides superior conditions in a variety of applications. The simple yet powerful design is efficient to operate and easy to maintain. It can mow down thick grass or produce the fine cut striping effects required for sports fields and other applications.

• Six different deck configurations with 60, 63 or 72 in. (1.5, 1.6 or 1.8 m) widths-of-cut, as well as rear discharge, side discharge, fine-cut flail and mulching options.

• Parallel-series traction system for superior hill climbing ability and side hill operation.

• 2WD or 4WD for operating on various types of terrain.

• Hydraulic deck drives are easier to maintain than mechanical systems. No gear box, drive shaft or clutch and no belts to replace.

• Multipurpose fine-cut flail deck option is rugged, provides safe downward discharge of debris and a beautiful striping effect with easy adjustment. It can also be used as a verticutter and aerification core destroyer.

www.jacobsen.com


Cutting Deck: One 60, 63 or 72 in. (1.5, 1.6 or 1.8 m) deck

Height of Cut: 1 – 4.75 in. (2.4 – 121 mm)

Width of Cut: 60, 63 and 72 in. (1.5, 1.6 and 1.8 m)

Dimensions: Weight: 2WD: 1310 lbs. (594 kg)

4WD: 1559 lbs. (707 kg)

Length: 88 in. (2.2 m)

Height: 82 in. (2.08 m) with ROPS

Width: 52 in. (1.3 m)

QUICK SPECS


SPECIFICATIONS



* Engine horsepower is provided by engine manufacturer. Actual operating power output may vary due to conditions of specific use.NOTE: Specifications, while correct at time of printing, may change without notice.

Rough/Rotary Mowers

TurfCatTM


EQUIPPED STANDARD


3 One piece seat

CUTTING UNITS

60 in. (1.5 m) rear discharge deck – hydraulic drive

63 in. (1.6 m) side discharge deck – hydraulic drive

72 in. (1.8 m) Envirodeck mulching deck – hydraulic drive

72 in. (1.8 m ) rear discharge deck – hydraulic drive

72 in. (1.8 m ) side discharge deck – hydraulic drive

60 in. (1.5 m) flail mower – hydraulic drive

ACCESSORIES

Leaf mulcher kit for 72 in. (1.8 m) side discharge cutting deck

Canopy/sunshade kit – adjustable

Traction assist/steering brakes

Differential lock kit

Tie down brackets

Additional counterweight

Exhaust spark arrestor (required for California)


21 in. (53 cm) blade for 60 in. (1.5 m) rear discharge deck



25 in. (64 cm) high lift blade for 72 in. (1.8 m) rear discharge deck

21 in. (53 cm) upper blade for 60 in. (1.5 m) Envirodeck

21 in. (53 cm) lower blade for 60 in. (1.5 m) Envirodeck

25 in. (64 cm) upper blade for 72 in. (1.8 m) Envirodeck

25 in. (64 cm) lower blade for 72 in. (1.8 m) Envirodeck

10W-30, 2.5 gallon (9.5 L) pail, 2 pack

10W-30, 5 gallon (18.9 L) pail

GreensCareTM 68 – 5 gallon (18.9 L) pail

GreensCare 68 – 55 gallon (208.2 L) drum

GreensCare Plus 68 – 5 gallon (18.9 L) pail


Rotary brush

Front blades

Debris blower

Cab

Snow blower

Engine

Type Kubota® D1305-EB 4-cycle, 3-cylinder, liquid-cooled, low-emissions certified diesel


Rated Horsepower* 29.1 hp (21.7 kW)

Air Cleaner Dry type with dust evacuator

Cooling Pressurized, sealed cooling system; coolant capacity: 6.8 qt. (6.4 L),

Lubrication Fully Pressurized

Oil Filter Full-flow, replacement spin-on type

Electrical System 40 amp alternator with 12V 450 CCA battery, fuse protected

Fuel Capacity 9 gal. (34 L)

Traction and Drive

Traction System Variable displacement hydraulic pump directly mounted to engine; front wheel motors

Deck Drive Hydraulic PTO with hydraulic gear pump and motor with electro-hydraulic control valve

Hydraulic System Separate 3 gal. (11.3 L) reservoir; full-flow filter with oil cooler

Hydraulic Cooling Full-flow filter with oil cooler


Tires Front: 23 x 10.5, 4-ply, turf tread Rear: 18 x 8.5, 4-ply, turf tread

Service Brakes Foot-operated, mechanical, drum-style

Parking Brakes Foot pedal actuated parking brake

Steering Hydrostatic with rear wheel steering

Speed

Transport 0-10 mph (0-16 km/h)

Mow 0-6 mph (0-9.7 km/h)

Reverse 0-3 mph (0-48 km/h)


Deck Number and Size One 60 in. (1.52 m), 63 in. (1.60 m) or 72 in. (1.82 m)

Construction 11-gauge steel with 7-gauge steel on side skirts

Caster Wheels Two 11 x 4.5 pneumatic, tubeless, 4-ply

Cutting unit lift Hand operated, lever controlled hydraulic lift system

Weight transfer Springs transfer 180 lbs. (82 kg) from cutting deck to tractor

Blades/Decks Rotary, fine-cut flail, rear discharge, side discharge or mulcher; See cutting capacity below for more detail.

Motor / spindle Top-mounted 1 in. (25.4 mm) diameter shaft on lubricated ball bearings in machined housing

Height-of-cut 1-4.75 in. (25.4-121 mm) in 0.25 in. (6 mm) increments0 in. with flail attachment

Cutting capacity 60 in.= up to 3.3 acres (1.3 ha) per hour at 5.5 mph (9 km/h)63 in.= up to 3.5 acres (1.4 ha) per hour at 5.5 mph (9 km/h)72 in.= up to 4 acres (1.6 ha) per hour at 5.5 mph (9 km/h)

Overall cutting width 60 in. (1.52 m), 63 in. (1.60 m) or 72 in. (1.82 m)


Weight 2WD: 1,310 lbs. (594 kg) 4WD: 1,559 lbs. (707 kg)

Length (with Deck) 88 in. (2.2 m)



Width (without Deck) 52 in. (1.32 m)


CUSHMAN ®

TURF-TRUCKSTER®

• Heavy duty payloadof2850lbs.(1293kg);steelorpolydumpingbedsavailable.

• Choice of transmissionswithindustry-exclusiveautomatic3-speedtransmissionavailable;Dash-mountedshifterforautomatic,4-speedor5-speedmanualtransmission.

• Power for the rugged road ahead:33.8hp(25.2kW)EFIgasengineor24.8hp(18.5kW)dieselengineavailable.

• Full line of attachment optionsincludingatopdresser,CoreHarvester,spreader,blower,QuickAeratorandsprayermaketheTurf-Trucksteroneofthemostversatilevehiclesonthemarket.

www.jacobsen.com

Engine: Gas or Diesel

Rated Capacity: 2850 lbs. (1293 kg)

Drive Train: 4-speed manual, 5-speed manual, 3-speed automatic

Speed: 1 – 26 mph (1.6 – 41.8 km/h) depending on model

Dimensions:

Weight: 1742 – 1956 lbs. (790 - 887 kg)

Length 114.2 in. (2.9 m)

Height: 49 in. (1.2 m)

Width: 63.5 in. (1.61 m)

QUICK SPECS

Utility Equipment

The Cushman® Turf-Truckster® by Jacobsen® is the most rugged, easiest riding and best equipped turf vehicle on the market, featuring a heavy-duty carbon steel channel e-coated and powder painted frame and dent resistant rustproof body.

CHECK IT OUT!Scan with your smart phone to view the Cushman® Turf-Truckster® gas product page. Get app using your smartphone at i-nigma.mobi


EQUIPPED STANDARD34 post ROPS with seat belt3Liquid-cooled engine32 speed rear axle3Front underhood storage area3Governor3Hand throttle controls3Headlights3Horn3Phone / cup holder312V power plug outlet3Cushman pin disconnect system3Hydraulics with auxiliary outlets34-ply turf tread rear tires

ACCESSORIES Flatbed, 47 in. (1.19 m) quick disconnect Box assembly, 47 in. (1.19 m) sides and tailgate with automatic tailgate release

Box liner Flatbed 60 in. (1.52 m) quick disconnect Box assembly, 60 in. (1.52 m) sides and tailgate with automatic tailgate release

Box assembly, poly box 42.5 in. L x 46 in. W x 13 in. Deep (1.08 m L x 1.17 m W x .33 m Deep)

Top Dresser 1500 – Textured crescent belt with V guide Core Harvester for mounting to 47 in. (1.19 m) or 60 in. (1.52 m) steel bed

Vicon Spreader Quick Aerator Implement Lift (“A” frame) Hitch, receiver style with drawbar – male insert 1.5 in. (3.81 cm) Drawbar (male insert only) Hitch, flat bar style Fifth wheel ball hitch including electric brake controller Axle Truss Kit Hydraulics, high/low (Gas and Diesel) PTO, heavy-duty, hydraulic PTO, heavy-duty, mechanical ROPS with seat belts and integrated canopy Cab, black with ROPS, windshield with wiper and rear window Doors, steel, Jacobsen orange Doors, steel, Ransomes green Heater/defroster Windshield with wiper Rear window Turf signals with right hand taillight Outside mirrors, right and left Front bumper Alarm, back-up kit, variable pitch Exhaust spark arrestor

Engine Gas Diesel

Type Suzuki®660EFI,3-cylinder,4cycle,12valve,liquidcooledelectronicfuelinjection

Kubota®D1105diesel,3-cylinder,4-cycle,liquidcooled

Horsepower* 33.8hp(25.2kW)governedat4450rpm

24.8hp(18.5kW)

AirCleaner Donaldson®drycartridgetypewithevacuatorvalve

Lubrication Fullypressurizedsystemwithfullflowoilfilter

FuelCapacity 7.0gal.(26.5L)unleaded 7.0gal.(26.5L)No.2diesel

ElectricalSystem

60amp,heavydutyalternator;12Vstarterwithsafetyinterlock

Drive Train

Clutch 6.7in.(170mm)dry,singlediscandpressureplate

7.1in.(180mm)singlediscandpressureplate

ManualTransmission

Fivespeedmanualtrucktransmissionwithlow-low(creeper)firstgear;synchronizedinallforwardgears;twospeedrearaxle

Fourspeedmanualtrucktransmissionwithlow-low(creeper)firstgear;synchronizedinallforwardgears;twospeedrearaxle

AutomaticTransmission

Threespeedautomotive


FrontTires 20x10-10,4plyribtread

RearTires 24x13-12,4plyturftread

Brakes Heavydutyhydraulic,7.9in.(201mm)duo-servo,selfadjustingbrakesonallwheels,withdualmastercylinderandremotetrunk-mountedmastercylinderreservoir

Steering Automotivepowersteering

FrontSuspension DoubleA-armindependentsuspensionwithspring-overshockabsorbers

RearSuspension Heavyduty,multipleleafspringswithshockabsorbers

MaximumCapacity

2850lbs.(1293kg)Maximumcapacity.Foravailablepayloadcapacity,subtractweightofdriver,anypassengers,ROPSandaddedaccessories

Speed

ManualTransmission

1stgear:1.4-4.3mph(2.2-7.0km/h2ndgear:2.3-7.3mph(3.7-11.8km/h)3rdgear:3.6-11.6mph(5.8-18.6km/h)4thgear:5.5-17.5mph(8.8-28.1km/h)5thgear:6.9-22.1mph(11.1-35.6km/h)Reverse:1.3-4.3mph(2.2-6.9km/h)

1stgear:1.7-5.5mph(2.7-8.8km/h)2ndgear:3.2-10.2mph(5.1-16.5km/h)3rdgear:4.4-14.0mph(7.0-22.5km/h)4thgear:6.2-19.9mph(10.0-32.1km/h)Reverse:1.8-5.7mph(2.9-9.3km/h)

AutomaticTransmission

1stgear:2.5-8.1mph(4.1-13km/h)2ndgear:4.5-14.4mph(7.2-23.2km/h)3rdgear:6.9-22.1mph(11.1-35.6km/h)Reverse:3.1-9.9mph(5-16km/h)


Weight Manual:1808lbs.(820kg)Automatic:1742lbs.(790kg)

Manual:1956lbs(887kg)


Height 49in.(1.2m)



SPECIFICATIONS


Utility Equipment

TURF-TRUCKSTER®


©2012Jacobsen,ATextronCompany/TextronInnovationsInc.Allrightsreserved.1009/C/MAR2012


CUSHMAN ®


17

www.jacobsen.com

attachMentS

www.jacobsen.com

cuShMan® tD 1500 by JacobSen®

Deck-mounted to optimize stability and performance while distributing light or heavy amounts of wet or dry material evenly on greens, fairways and sports fields.

acceSSory Lift & StoraGe rack

Makes it easy to install or remove Turf-Truckster attachments. Features a heavy-duty 7-gauge and 10-gauge welded steel frame, lifting accessories weighing up to 1,500 lbs.

quick aerator®

Cover a wide, 46-inch swath, using coring, slicing and open spoon tines. Easily lift and lower from the driver’s seat with live hydraulics.

rahn infieLD GrooMer

Provides a safer, more consistent playing surface by scarifying, grooming and leveling the ground. includes a double-brush broom for light finishing.

core harveSter

Allows one person to do the work of three: pick-up, load and dump aeration cores in less time (cover a 7,000 square foot area in 15 minutes.) Floating blades automatically adjust to undulating ground for quick core pick-up on almost any terrain without damaging turf.

cuShMan® turf MaSter Sprayer

installation is quick and easy; the performance is controlled and precise. Options include a 15-foot dry boom and 21-foot convertible dry boom assembly, foam marker, hose reels, spray guns, spray hose hanger and spray gun electric boom lift and pressure gauge isolator kit.

vicon® SpreaDer

Features convenient, easy-to-use controls to deliver precise, uniform, controlled distribution of seed, sand and fertilizer.

buffaLo turbine bLoWer

High-speed turbine ensures outstanding performance, efficiently and quickly clearing away debris.

other acceSSorieS*

•47-or60-inchsteelbedorpolybox • Boxliner • Hi/LoHydraulics • Cab • Heater/Defroster • Windshield

*For a complete list of accessories, contact your local Jacobsen dealer.


QUICK SPECS

Weight: 238 lbs.Bed size: 42”x 42”Axle Shaft: 1” diameterFloor: .176” RubberHitch: Dual PositionBed Height: 7”Width: 60”Overall Length: 101”Tongue Length: 36”

The new Jacobsen Mower Caddy is designed with the operator in mind. This rugged and versatile trailer features a new drive-on ramp and simple latching mechanism that make it easier than ever to load walking greens mowers on and off so you can get the job done in less time.

Maximum productivity• Easy Loading. Simply “drive” the mower forward onto the

trailer ramp and you are on your way.

• New simple latching mechanism has a Universal “hook” system to easily secure equipment for transport. You can quickly switch between mower models with no changes to the trailer.*

Built to last• Heavy-duty welded steel frame and bed will provide a

durable construction to last for years.

• “Soft” decks with rugged rubber matting on the trailer bed protects the rollers, traction drum and cutting units.

• Dual position hitch provides two attachment points for easier trailer leveling for various vehicle heights.

Safe and efficient• Convenient tie down loops provide greater stability

especially on hilly terrain. Added tie down points protect your investment in our legendary cutting system.

• Increased vehicle clearance. The extra distance between the Mower Caddy and towing vehicle creates additional clearance for tight turns allowing you to access hard to reach areas.

Multiple accessories• Optional accessories include a dew whip holder, grass basket

holder, and spare battery mounting carrier.

• Mower mounting kits are available for each Jacobsen walking greens mower model.*

* Each mower requires a mounting kit which is secured by the trailer latch. Mounting kit sold separately.

www.jacobsen.com

©2011 Jacobsen, A Textron Company/Textron Innovations Inc. All rights reserved.

jacobsen® Mower Caddy™


Groom Master ® II

CHECK IT OUT!Scan with your smart phone to view the Groom Master® II product page. Get app using your smartphone at i-nigma.mobi

The Groom Master® II by Jacobsen® is a versatile and powerful machine for projects requiring a smooth finish and maneuverability. The hydrostatic drive delivers superior pulling and pushing power to put the final touches on a golf course bunker, new-course construction or baseball infield.

• Parallel-Series 3WD traction systemprovidesgripindeepanddampworkingconditionsensuringawheelwillkeepfootingandmaintainproductivity.

• Strong and reliable powertrainconsistingof18hp(13.4kW)Gasor16.6hp(12.4kW)Dieselengineandfull-timehydrostaticdrivehasplentyofpowertopushsandupaslopeorpullalargemat.

• Maneuverable power steeringforresponsiveandeasysteeringwithinabunkeroraroundabase.

• Front, mid and rear accessory mounting pointsofferattachmentpointstomeetvaryingneeds.Attachmentsincludeaspring-assistedmanualorhydraulicoperatedheavy-dutyfrontblade,mid-mountcultivatorsorscarifier,rearrakesanddragmatandmanymore.

• Operator ergonomics and safetycomestandardwiththesmoothfoot-pedaltransmission,adjustablesteeringwheelandhigh-backseat,standardpowerrearrakelift,ROPSwithseatbelt,andheadlightforoperationbeforedawnorafterdusk.

www.jacobsen.com

Engine & Horsepower*:

Gas: Briggs & Stratton® Vanguard™ 18 hp (13.4 kW)

Diesel: Kubota® 16.6 hp (12.4 kW)

Forward Speed:

Up to 9.3 mph (15 km/h)

Dimensions:

Weight: 984 lbs. (446 kg) with rear rake, less operator

Length: 90 in. (2.3 m) with rear rake, front blade

Width: 73.5 in. (1.9 m) with rear rake

Turning Radius: 6 in. (152 mm) inside rear tire

QUICK SPECS

Sand Rakes

Groom Master ® II gas shown with front blade, cultivator and rear rake/fan rakes


SPECIFICATIONS




Sand Rakes

Groom Master ® II


EQUIPPED STANDARD


3 Parallel-series 3WD and power steering

3 Hydraulic powered rear implement lift

3Adjustable seat and steering wheel

3 Headlight

3 12 Volt accessory power outlet

ACCESSORIES

Front blade, manual lift

Mid-mount cultivator, hydraulic controls

Cultivator straight blade feet

Cultivator aggressive duck feet

Mid-mount scarifier with leveling blade

Hydraulic controls for front blade or scarifier

Rear drag mat with transport carrier brackets

Rear rake implement

Fan rakes (four) add-ons to rear rake




Box blade

Flip-up finishing brush

Infield conditioner

Power

Engine Gas:Two-cylinder,air-cooledBriggs&Stratton®Vanguard™V-twinDiesel:Three-cylinder,liquidcooledKubota®D722

Horsepower* Gas:18hp(13.4kW)@3600rpmDiesel:16.6hp(12.4kW)@3000rpm

ChargingSystem Gas:12-volt,16ampalternator;fullsizebatteryDiesel:12-volt,40ampalternator;fullsizebattery

AirCleaner Donaldson®type;remotemounted

FuelCapacity 4.5gal.(17.1L)

Performance

ForwardSpeed 0-9.3mph(0-15km/h)transportandworking

ReverseSpeed 0-3.5mph(0-5.6km/h)

ParkingBrake 6in.(152mm)caliperdisc

Hydraulic System

Drive Hydrostatic,three-spoolvalveforaccessories

HydraulicOilCapacity 12qt.(11.4L),25-micronfilter

OilCooler Sidelocation;isolationmounted

Brakes Hydrostaticbrakingwithmechanicalparkingbrake

Steering Automotive-stylepowersteering

Tires Three20x11.00-10tubeless,knobbytreadtires

Dimensions

Weight 984lbs.(446kg)withrearrake,lessoperator

Length 90in.(2.3m)withrearrakeandfrontblade

Width 73.5in.(1.9m)withrearrake

GroundClearance 7.5in.(191mm)

WheelBase 40in.(1m)

OutsideWheelTread 59in.(1.5m)

TurningRadius 6in.(152mm)insidereartire


GA-24®

CHECK IT OUT!Scan with your smart phone to view the GA-24® product page. Get app using your smartphone at i-nigma.mobi

The Jacobsen Greensaire® 24 walk-behind aerator is a popular choice for promoting superior turf health on greens, tees and specialty grounds areas. Its unparalleled core hole quality promotes faster turf healing – allowing play to resume earlier. The unit’s maneuverability allows for tight turns on undulated turf without causing undue damage.

• Narrow platformcreatescleanandconsistentaerationholedepthsevenonundulationsandvaryingterrains.Thecoreheadfollowscontoursofthesurfaceensuringtinesareinpositiontocreateclean,qualityholeseverytime.

• Centralized controls at operator stationwithforwardandreversemaneuverability,automaticparkingbrakeandoperatorpresencecontrolmaketheGA-24easyandsafetooperate.

• Quality Jacobsen DuraTine™ XLT tinescouplecoatedthinwallstoprohibitcorrosionforimprovedholesmoothnesswithtoughhardenedsteelandcarbidetipforultimatelongevity.

• Quad tine optional holdersallowfora1x1in.(2.54x2.54cm)aerationpatternremovingover11%ofareainasinglepass.Standardtinescreatea2x2in.(5.1x5.1cm)pattern.

www.jacobsen.com

Engine: Briggs and Stratton® Vanguard Gas engine

Working Depth: Up to 3 in. (7.6 cm)

Aeration Pattern:

2 x 2 in. (5.1 x 5.1 cm) with standard tines

1 x 1 in. (2.54 x 2.54 cm) with optional Quad Tine holder

Dimensions:


Length: 72 in. (1.68 m) with handle extended

Height: 37.5 in. (95.3 cm) with handle extended

Width: 49.5 in. (1.26 m)

QUICK SPECS

Aerators



Engine

Engine Briggs&Stratton®Vanguard™Gas

RatedHorsepower** 9hp(6.7kW)@3600rpm

Displacement 18.64cu.in.(305.5cc)

FuelCapacity 2.5gal.(9.5L)

Lubrication Cams,horizontalslides,pushrodsandbearingsarecontinuouslylubricated;sealed,cast-ironcamcase;allotherlubricatingpointsarepressuregreasefittings


DriveWheel #40rollerchain

Differential Parallelshaft,spurgear

TransportSpeed 4mph(6.4km/h)

Aeration Head

WorkingWidth 24in.(61.0cm)

WorkingDepth Upto3in.(7.6cm)

AerationPattern StandardTines:2x2in(5.1x5.1cm)WithOptionalQuadTineHolder:1x1in.(2.54x2.54cm)

HolesperSquareFoot 36

Productivity Upto8000sq.ft(743.2squaremeters)perhour

Crankshaft #50rollerchain

ConnectingRodandDearing

Castaluminumwithinsertbearingonductileironcrankshaft

SlideBearingandSeals Low-frictionTeflon™bearings;triplelipseals

HydraulicLiftSystem Direct-drive;hydraulicgearpump

StandardTines Hollow,tapered,case-hardenedsteel;twosetsof1/2in.(13mm)diameter

Tires and Brakes

FrontTires 11x4.00-5,4-plyribbed

RearTires 16x6.50-8,4-plyribbed

Brakes Automaticdiscparkingbrake

Dimensions

Length 72in.(1.83m)withhandleextended


Height 37.5in.(95.3cm)totopofsteeringhandle


Optional Equpment

QuadTineHolder QuadTineHolderSetwithturfguardassemblyandyourchoiceoftines:1/2in.(13mm)coring,1/4in.(6mm)coringor1/4in.(6mm)solidtines

WindrowAttachment Floatingbladeslineupcoresforeasier,quickerremoval.

SPECIFICATIONS




Aerators

GA-24TM


EQUIPPED STANDARD3Operator Presence Control3Twelve DuraTine XLT 1/2 in. (13 mm) diameter, 5/8 in.

(16 mm) mount diameter top eject tines in Twin Tine holders


ACCESSORIES Quad Tine Kit with 1/2 in. (13 mm), 5/8 in. (16 mm) mount, coring tines, quad tine holder and turfguard

Quad Tine Kit with 1/4 in. (6 mm), 1/2 in. (13 mm) mount coring tines, quad tine holder and turfguard

Quad Tine Kit with 1/4 in. (6 mm), 1/2 in. (13 mm) mount solid tines, quad tine holder and turfguard

Twin Tine holder for 1/4 in. (6 mm), 1/2 in. (13 mm) mount tines



Windrow for removing cores from wheel path

GENUINE JACOBSEN TINES 1/4 in. (6 mm) core/hole diameter with 1/2 in. (13 mm) mount diameter

Original 1/4 in. (6 mm) side eject DuraTine XL 1/4 in. (6 mm) solid DuraTine XLT 1/4 in. (6 mm) side eject 1/4 in. (6 mm) core/hole diameter with 5/8 in. (16 mm) mount diameter

Original 1/4 in. (6 mm) top eject DuraTine XL 1/4 in. (6 mm) solid 3/8 in. (10 mm) core hole diameter with 5/8 in. (16 mm) mount diameter

Original 3/8 in. (10 mm) top eject DuraTine XL 3/8 in. (10 mm) solid 1/2 in. (13 mm) core/hole diameter with 5/8 in. (16 mm) mount diameter

Original 1/2 in. (13 mm) top eject DuraTine XL 1/2 in. (13 mm) top eject DuraTine XLT 1/2 in. (13 mm) top eject 1/2 in. (13 mm) core hole/diameter with 3/4 in. (19 mm) mount diamter

Original 5/8 in. (16 mm) top eject DuraTine XL 5/8 in. (16 mm) top eject DuraTine XLT 5/8 in. (16 mm) top eject DuraTine XL 5/8 in. (16 mm) solid VenTine 3/16 in. (5 mm) x 5/8 in. (16 mm)

Venting tine, 5/8 in. (16 mm) mount diameter


SprayTek TM

DS-175

CHECK IT OUT!Scan with your smart phone to view the SprayTekTM DS-175 product page. Get app using your smartphone at i-nigma.mobi

• Two Leading Technologies Together - Cushman turf vehicles; SDI spray equipment.

• Solution Tank - Low-profile, tapered design; chemical and impact-resistant, baffled fiberglass; external sight tube with calibration marks; side-fill hatch for easy access.

• Select Your Spray System - Manual, all-function electronic system or Raven® flow-based computer boom control options; Booms include 15 ft. (4.57 m) or 21 ft. (6.4 m) convertible spray boom with 13 triple nozzle bodies on 20 in. (50.8 cm) centers, 15 ft. (4.57 m) with 10 in. (25.4 cm) or 20 in. (50.8 cm) nozzle spacing and 15 ft. (4.57 m) shielded all with bidirectional breakaway hinges. All deluxe spray booms now include forward folding storage feature.

• 175 gallon tank with 33.8 hp (25.2 kW) gas engine.

• Powerful Pump Gets the Job Done - Corrosion-resistant 316 stainless centrifugal pump; Maximum capacity of 44 gpm (167 lpm) up to 80 psi (5.5 BAR) at 4200 RPM; Lifeguard™ Silicon Carbide seals for leak resistance and long wear.

www.jacobsen.com

Engine: Suzuki® Gas

Tank Size: 175 gallons (663 L)

Pump Capacity: 44 gpm (167 L per minute) up to 80 psi (5.5 BAR) maximum at 4200 RPM

Dimensions:

Weight: 1930 lbs. (875 kg) with boom and boom control

Length: 133 in. (3.4 m)

Height: 74.5 in. (1.9 m)

Width: 15 ft. (4.57 m) boom: 68 in. (1.7 m)

21 ft. (6.4 m) boom: 77 in. (2 m)

QUICK SPECS

Sprayers

If you need a powerful sprayer with enough pressure and flow to provide consistent coverage and maintain proper agitation, even on hills, then you need the Cushman® SprayTek™ by Jacobsen®. With a stainless steel centrifugal pump this sprayer is a high value offering with lots of options available to tailor it to your specific needs.


EQUIPPED STANDARD

34-post ROPS with seat belt

3Liquid-cooled engine

32-speed rear axle

3Front underhood storage area

3Governor and hand throttle controls

3Headlights

3Horn

3Phone/cup holder

312V power outlet

34-ply turf tread rear tires

3Gage wheels standard on deluxe spray booms

BOOM OPTIONS

Convertible Deluxe Spray Boom 15 – 21 ft. (4.57 – 6.4 m)

Ground contour wheel kit

15 ft. (4.57 m) dry Deluxe spray boom, 9 triple nozzles on 20 in. (50.8 cm) centers

15 ft. (4.57 m) dry Deluxe spray boom, 17 triple nozzles on 10 in. (25.4 cm) centers

WINDBREAKER 2000 Shielded Turf Boom, 15 ft. (4.57 m)

CONTROLLER OPTIONS

SDI “All Function” Electric Control System

Raven SCS330 or SC440 Control System

ADDITIONAL OPTIONS AND ACCESSORIES

Cab, black

Quick foam marker system

Electric boom lift actuators

GPS speed sensor for Raven 330 or 440 system

Lightweight walking boom

Manual or electric hose reel

Clean load system

Engine

Type Suzuki® 660 EFI, 3 cylinder, 4 cycle, 12 valve, liquid cooled electronic fuel injection

Horsepower* 33.8 hp (25.2 kW)

Air Cleaner Donaldson® dry cartridge type with evacuator valve

Lubrication Fully pressurized system with full flow oil filter

Fuel Capacity 7.0 gal. (26.5 L) unleaded

Electrical System 60 amp, heavy duty alternator; 12 V (0.8 kW) starter with safety interlock

Drive Train

Clutch 6.7 in. (170 mm) dry, single disc and pressure plate

Manual Transmission Five speed manual truck transmission with low-low (creeper) first gear; synchronized in all forward gears; two-speed rear axle


Front Tires 20 x 10-10, 4 ply rib tread

Rear Tires 24 x 13-12, 4 ply turf tread

Brakes Heavy duty hydraulic, 7.9 in. () duo-servo, self-adjusting brakes on all wheels, with dual master cylinder and remote trunk-mounted master cylinder reservoir

Steering Automotive power steering

Front Suspension Double A-arm independent suspension with spring-over shock absorbers

Rear Suspension Heavy duty, multiple leaf springs with shock absorbers

Tank Capacity 175 gal (663 L)

Pump Capacity 44 gpm (167 LPM) up to 80 psi (5.5 BAR) maximum at 4200 RPM

Speed

Manual Transmission 1st gear: 1.1 - 3.5 mph (1.8 - 5.6 km/h) 2nd Gear: 1.9 - 5.9 mph (3.0 - 9.5 km/h) 3rd Gear: 2.9 - 9.4 mph (4.7 - 15.1 km/h) 4th Gear: 4.4 - 14.1 mph (7.1 - 22.8 km/h) 5th Gear: 5.6 - 17.9 mph (9.0 - 28.8 km/h) Reverse: 1.1 - 3.5 mph (1.7 - 5.6 km/h)


Weight 1930 lbs. (875 kg) with boom and boom control

Length 133 in. (3.4 m)

Height 74.5 in. (1.9 m)


Width 15 ft. (4.57 m) boom: 68 in. (1.7 m) 20 ft. (6.09 m) boom: 77 in. (2 m)

SPECIFICATIONS



* Engine horsepower is provided by engine manufacturer. Actual operating power output may vary due to conditions of specific use.

NOTE: Specifications, while correct at time of printing, may change without notice.

Sprayers

SprayTek TM DS-175



Cushman® SPRAYTEK®

DS-300

If you need a powerful sprayer with enough

pressure and flow to provide consistent coverage

and maintain proper agitation, even on hills,

then you need the Cushman® SprayTek™. With

maximum capacity of 130 psi or 80 gpm using a

stainless steel centrifugal pump this sprayer is a

high value offering with lots of options available

to tailor it to your specific needs.

• Two Leading Technologies, Cushman turf vehicles and SDI spray equipment, work together.

• Solution Tank has a low-profile, tapered design. Chemical and impact-resistant. Baffled fiberglass construction. External sight tube with calibration marks and side-fill hatch make for easy access.

• Select Your Spray System: Manual, all-function electronic system or Raven® flow-based computer boom control options; Booms include 15’ or 21’ convertible open boom and 15’ shielded with bidirectional breakaway.

• DS-300 Gallon with 26 hp (governed @ 3,200 rpm) diesel engine.

• Powerful Pump Gets the Job Done: Corrosion-resistant 316 stainless centrifugal pump; Maximum capacity of 80 gpm or 130 psi; Lifeguard™ Silicon Carbide seals for leak resistance and long wear.

QUICK SPECS

www.jacobsen.com



Tank Capacity: 300 gal (1137 L)

Weight: 2110 lbs. (957 kg) with boom and boom control

Dimensions: Length: 133 in. (3.4 m) Height: 49 in. (1.2 m) Width: 15 ft. (4.6 m) boom: 68 in. (1.7 m) 20 ft. (6.1 m) boom: 77 in. (2.0 m)

UTILITY EQUIPMENT



SPECIFICATIONS

The Official Turf Equipment Supplier to The PGA of America and The Exclusive Turf



PROUDMEMBER

Cushman®

SPRAYTEK® DS-300

Engine

Type Kubota® D1105 diesel, 3-cylinder, 4-cycle, liquid cooled

Rated Horsepower* 24.8 hp (18.5 kW)

Air Cleaner System Donaldson® dry cartridge type with evacuator valve

Lubrication Fully pressurized system with full flow oil filter

Fuel Capacity 7.0 gal. (26.5 L) No. 2 diesel

Electrical System 60 amp, heavy duty alternator; 12 V starter with safety interlock

Drive Train

Clutch 7.1 in. (180 mm) single disc and pressure plate

Manual Transmission Four speed manual truck transmission with low-low (creeper) first gear; synchronized in all forward gears; two speed rear axle


Front Tires 20 x 10-10, 4 ply rib tread

Rear Tires 24 x 13-12, 4 ply turf tread

Brakes Heavy duty hydraulic, 7.9 in. (200 mm) duo-servo, self adjusting brakes on all wheels, with dual master cylinder and remote trunk-mounted master cylinder reservoir

Steering Automotive power steering

Front Suspension Double A-arm independent suspension with spring-over shock absorbers

Rear Suspension Heavy duty, multiple leaf springs with shock absorbers

Tank Capacity 300 gal (1137 L)

Pump Capacity 44 gpm (5 L per second) or 80 psi (9.0 BAR) maximum

Speed

Manual Transmission 1st Gear: 1.7 - 5.5 mph (2.7 – 8.8 km/h)2nd Gear: 3.2 - 10.2 mph (5.1 – 16.5 km/h)3rd Gear: 4.4 - 14.0 mph (7.0 – 22.5 km/h)4th Gear: 6.2 - 19.9 mph (10 – 32.1 km/h)Reverse: 1.8 - 5.7 mph (2.9 – 9.3 km/h)


Weight 2110 lbs. (957 kg) with boom and boom control

Length 133 in. (3.4 m)

Height 49 in. (1.2 m)


Width 15 ft. (4.6 m) boom: 68 in. (1.7 m)20 ft. (6.1 m) boom: 77 in. (2.0 m)

UTILITY EQUIPMENT

©2011 Jacobsen, A Textron Company/Textron Innovations Inc. All rights reserved. V2–NOV2011

*Engine horsepower is provided by engine manufacturer. Actual operating power output may vary due to conditions of specific use. NOTE: Specifications, while correct at time of printing, may change without notice.



19

www.jacobsen.comwww.jacobsen.com

priStine reSuLtS• Power steering, tilt wheel and ergonomically designed hydro pedal.

• Plow, cultivator, rake and scarifier with leveling blade, ball field conditioner, box blade and other attachments available.

• Briggs and stratton® 18 hp Vanguard™ twin gas engine or 16.6 hp Kubota® 3-cylinder diesel.

• Parallel-series 3WD traction provides grip in deep and damp conditions.

coMbineS Great erGonoMicS, poWer anD ManeuverabiLity to proviDe Superior proDuctivity.

greensaire® 24

hiGhLy proDuctive• Centralized controls and 9 hp Briggs and stratton® Vanguard™ engine.

• DuraTine™ premium tines standard; with seven varieties of tines available, including four core diameters and venting tines.

• Durable transaxle with integrated transmission provides easy forward and reverse maneuverability.

• Quad Tine Holder kit doubles productivity with twice the turf removal power.

unparaLLeLeD hoLe quaLity proMoteS faSter turf heaLinG anD aLLoWS pLay to reSuMe earLier.

proMoteS turf heaLth• Three cutting heads, each with 18 adjustable discs and 54 reversible

blades that penetrate soil up to 0.375 inches.

• Use with any PTO-equipped tractor with 30 or more horsepower.

• Wide, 84-inch cutting path and 4 mph cutting speed cover more than three acres an hour for high productivity.

verticut 214tractor-puLLeD, preciSion-enGineereD to StiMuLate neW GroWth anD reMove exceSSive WaSte Matter.

cusHMan®

spraYteK®

groom master ii®



20

Jacobsen® legendary™ bedKnives

A key component of the Jacobsen Greens Management system, our Legendary™

Bedknives work with Jacobsen Classic XP reels to help you achieve optimum height

and quality of cut time after time. Made of alloy or hardened carbon steel, they

provide longer wear and greater strength.

• Patented,austemperedheat-treatingprocessprovidesatougherpartwithminimumdistortion. All bedknives distort during the heat treat process but, by controlling it, there is less stress during straightening.

• 100%straightand100%qualityinspected,eachbedknifedeliversclosertolerancesbetween the reel and bedknife, and guarantees quality, fit and function.

jaCObSEn®

genuine pARTsjaCObSEn®OFFERSaCOMPLETECuTTInGanDTuRFManaGEMEnTSySTEMTHaTISPROvEnTOyIELDSuPERIORPLayInGCOnDITIOnSanDIMPROvEDTuRFHEaLTH.WHEnITCOMESTOREPLaCEMEnTPaRTS,OnLyjaCObSEnGEnuInEPaRTSPROvIDETHEbESTPERFORManCEanDSuPERIORRESuLTS.

Jacobsen® classic xp™ reels

Jacobsen Classic XP™ reels with Advanced relief Technology™ provide the legendary

quality of cut Jacobsen is known for. The increased durability, reduced wear and

extended life allow the reels to maintain a sharp edge longer, resulting in consistent

cut and less labor and downtime.

• Advanced relief Technology features a 45-degree relief angle and improved face angle of the reel blade to significantly extend the life of the blade and optimize it for less wear and abrasion.

• The Jacobsen grinding process yields the best blade surface and delivers up to three times more spin grinds than generic aftermarket blades.


21

www.jacobsen.com

roLLerS

Choose from our complete line of rollers to help get the

cutting performance and ground following your environment

demands. Jacobsen Rollers include: grooved machined aluminum or

steel front rollers, grooved segmented front roller, grooved assembly steel

disc front roller or solid tube front roller.

turf GrooMerS®

Well-groomed turf provides a firmer and faster playing surface that’s

“more-true” from green to green. it prunes the grass plant and opens the

canopy by removing thatch and allowing water, seed and fertilizer to work

more effectively. Regular grooming reduces the need to verticut. Available

for walking greens mowers, riding greens mowers and fairway mowers.

poWer roLLer bruSh

The rear roller brush will ensure a consistent cutting height across

the green by keeping the rear roller free of debris. This is especially useful

in wet conditions.

fine briStLe bruSh

The fine bristle brush helps ensure an even cut. Positioned between the

forward roller and the reel, the brush stands up the grass prior to being cut.

MaGknife™

MAGKnife™ is always sharp, easier to change out and forgiving when you hit

a sprinkler head. Magnets hold the bedknife tight without time-consuming

screws. New trivalent coating offers increased resistance to rust and corrosion

and an increased number of more powerful magnets provides a strong and

consistent hold.

verticutter

For those times in spring and fall when you need to remove excess thatch and

stolon growth, you’ll find the Jacobsen verticutter attachment to be the right

tool. it’s designed to cut into or at the soil surface to allow water, oxygen and

nutrients to penetrate the root zone.

Spiker

spiking greens improves air and nutrient flow to the root zone without time-

consuming aeration. The spiker assembly is a non-powered vertical blade

set that penetrates the turf and soil surface to lightly aerate with minimal

disruption to the playing surface.

quick roLL™

Rolling greens improves ball roll by smoothing and firming the turf. The Jacobsen

Quick Roll™ attachment negates the need for a dedicated roller and gets the job

done significantly faster than traditional walk-behind or ride-on rollers.


22

duratine™ xl and xlt • special alloy steels and strict manufacturing tolerances ensure best

field performance.

• DuraTines™ are designed and manufactured to outlast competitive equivalents by up to 75%.

• New heat treat process offers a harder surface skin with tougher cores, resulting in longer sidewall life with less breakage.

• Trivalent coating prohibits corrosion for improved hole smoothness and appearance.

• Jacobsen DuraTine™ XLT tines with carbide tips have a new formula to outlast competition.

• DuraTine™ XL features longer tip life; even stronger than the original.

AeRATing Tines

new! greenscare plus

This high performance, fully synthetic oil is

designed to provide up to 3x the life of current

GreensCare (Original) and petroleum-based oils.

greenscare (Original) is made of seed-oil, is

non-hazardous and completely renewable.

bIODEGRaDabLE HYdRAulic fluid

greenscare™ and new greenscare™ plus • 96% biodegradable; allows turf to heal faster in the event of a

leak or spill.

• Contains none of the negatives associated with petroleum oils.

• extensively tested, specifically designed and approved for Jacobsen equipment.

• enhanced and improved seal compatibility —won’t deteriorate seals or cause other equipment damage.

• Years of field proven performance.

• save time and money—avoid the potential turf damage you may get from other hydraulic fluids.

• Meets industry standards for all of your equipment.

put an end to tHe risK of long-term turf problems and environmental contamination.

more productive, less disruptive


24

Engine horsepower is provided by engine manufacturer. Actual operating power output may vary due to conditions of specific use.

NOTE: Specifications, while correct at time of printing, may change without notice. 1000/C/Rev#1/Feb2012


Jacobsen has nearly a century of experience designing, manufacturing and delivering

superior turf maintenance equipment. This singular focus led to the legendary quality

of cut for which Jacobsen is known throughout the world. We are driven to build

upon this legend through unrivaled Quality, Innovation and Green Initiatives.

QUalITy

At Jacobsen, we take a “quality comes first” approach to everything we do. We engineer and manufacture reliable

products that deliver outstanding results year after year. And to us, quality extends beyond product. Just as important

is the service you receive after the sale. Your investment in Jacobsen is maximized by our network of dedicated dealers,

training programs and an experienced team of technical support personnel.

InnovaTIon

Jacobsen’s unrivaled experience began with the industry’s first greens mower. Most recently, Jacobsen introduced

the industry’s first all-electric, hydraulic-free greens mower. Ongoing innovations in operator comfort, customizable

controls and improved performance result in unmatched performance with proven operational savings.

GReen InITIaTIves

Jacobsen is the industry leader in electric and hybrid technologies. We are the only manufacturer to use

biodegradable hydraulic oil in our machines, and with the introduction of the Eclipse 322, we have the only

hydraulic-free riding greens mower on the market. And as a proud supporter of the Environmental Institute

for Golf, we are focused on a more sustainable approach to golf facility management.

leGendaRy QUalITy oF cUT comes sTandaRd.




Jacobsen Equipment

Documents

Transcript of Jacobsen Equipment