IWES Sydney 2012
-
Upload
trent-leggatt -
Category
Documents
-
view
215 -
download
1
description
Transcript of IWES Sydney 2012
Wastewater Treatment
Water Recycling
Drinking Water Treatment
Membrane Processes
Contaminated Site Assessment
Coal Seam Gas Water Management
CouRSeS inneW CouRSeSChemical Contaminants
in Water
Managing Climate Change Risk in the Water industry
www.iwes.com.au Ph 1800 000 404
SyDney20 - 24 February, 2012
The leading provider of short courses for environment professionals in Australia
iWeS is the largest and most successful continuing education program for professionals responsible for industry environmental performance in Australia.Courses are taught by leading industry practitioners and designed to keep busy professionals abreast of the latest trends, technologies and practices.
iWeS is the training provider of choice with several large organisations, and we strive to continue to innovate in our course offerings and delivery. in 2011, we introduced several new courses such as ‘Coal Seam Gas Water Management’, ‘Decentralised Wastewater Treatment’, ‘Water Recycling: Design, Assessment and optimisation’ and ‘Contaminated Site Assessment and Remediation’.
We look forward to continuing to provide a key service for environment industry professionals.
Index page
Principles of Wastewater Treatment 1
Trade Waste and industrial Wastewater Treatment 2
Decentralised Wastewater Treatment 3
Pond Design: The next Generation 4
Drinking Water Treatment: Principles, Practice and Applications 5
Membrane Plant Design and operation 6
Australian Drinking Water Guidelines 7
Chemical Contaminants in Water: Significance, Monitoring and interpretation 8
Water Recycling: Design, Assessment and optimisation 9
Coal Seam Gas Water Management 10
Managing Climate Change Risk in the Water industry 11
Contaminated Site Assessment and Remediation 12
essentials of Water Auditing 13
The Presenters
John Ashworth, Kon. Athanasiadis, Damien Batstone, Reid Butler 14
Cara Beal, Arran Canning, Heather Chapman, Daniel Deere 15
Mary Drikas, Paul Durrant, Jeff Foley 16
Ted Gardner, Mike Johns, Adam Jones, Ben Kele 17
Jurg Keller, Stuart Khan, Andrew King, Paul Lant 18
Greg Leslie, Chris Lund, Gayle newcombe, Steven Pratt 19
Paul Smith, Daryl Stevens, Simon Toze, Troy Walker 20
Joe Whitehead, Herb Williams 21
WaterAid 21
Registration Form 22
What do people say about iWeS? 23
Who will attend ? 23
The Venue 24
The Program 24
l Mon 20 l Tues 21 l Wed 22 l Thurs 23 l Fri 24 l
1
Issues addressed day 1 • Wastewatercharacterisationandsampling• Primarytreatmenttechnologies• Preliminarytreatmentanddataaudits• Workshopproblem1
day 2 • Secondarytreatment(aerobicversusanaerobic?)• Biological treatment technologies - ponds, biofilm processes,
aeration, high rate anaerobic and aerobic processes• PlantVisit1
day 3 • Aquaticchemistry-whyispHsoimportant?• Materialbalancing–afundamentaltoolforanalysing
wastewater treatment processes• Activatedsludge(incl.SBR,MBR,trouble-shooting)• Workshopproblem2-Secondarytreatmentdesignexercise
day 4 • Tertiarytreatment-ionexchange,
adsorption, membranes, disinfection• BiosolidsManagement• PlantVisit2
day 5 • WaterReuse-municipaland
industrial case studies• BiologicalNutrientRemoval• Workshopproblem3
whaT do you geT ? • Accesstoaworldleadingtrainingresource• Accesstoworldleadingpractitioners• Coursenotes• Twohalf-dayplantvisits• Threedetailedworkshopproblemsessionsbasedonreal
case study material• Coreengineeringskillsandtoolstotakebacktoyour
workplace, which will enable you to analyse and trouble-shoot your wastewater problems
• Realplantdataandexercises
Presenters: Paul Lant, Jurg Keller and Steven Pratt
Principles of Wastewater Treatment
who should aTTend?
engineers, scientists, managers and new staff whorequireanexcellentintroduction to the principles of wastewater treatment.
The aim of this course is to teach the key enabling scientific and process engineering fundamentals which underpin wastewater treatment processes. These are taught via real wastewater treatment problems and case studies.This is the most popular wastewater fundamentals course offered in Australia. Now featuring site visits, real case study data and exercises, and state-of-the-art multi-media teaching resources.
Go to www.iwes.com.au for the extended course outline
who should aTTend?
engineers, scientists, and managers responsible for managingliquideffluents,andwhorequireanexcellentoverview of the state-of-the art in industrial wastewater treatment technology and practice.
Trade Waste and Industrial Wastewater Treatment
Presenters: Jurg Keller, Damien Batstone & Mike Johns
2
The whole landscape of industrial wastewater treatment in Australia has been rapidly changing over the last few years.
In this course, you will be introduced to the state-of-the-art in industrial wastewater treatment and reuse in Australia, you will learn how to specify appropriate technologies for treatment and reuse, and how to trouble-shoot industrial wastewater treatment problems.
l Mon 20 l Tues 21 l Wed 22 l Thurs 23 l Fri 24 l
Go to www.iwes.com.au for the extended course outline
Issues addressed day 1 Characterising the Problem• Wastewatercharacteristics-COD;Solidsfractions;N&P• TradewastetrendsandpracticesacrossAustralia• Impactoftradewasteoncounciloperations• Workshop 1: Trade waste costing and evaluation of options
day 2 Chemical and Physical Treatment• Understandingwastewaterchemistry• Aggregation,flocculationandneutralisation• Advancedprimarytreatment(electrocoagulation,hydrocyclones)• Plantvisit1
day 3 Biological Treatment• Biologicaltreatmentmechanisms(aerobicvsanaerobic)• Treatmentprocesses(e.g.ponds,activatedsludge,SBR,MBR)• Highrateaerobicandhighrateanaerobicprocesses• State-of-the-artbiologicalwastewatertreatmentsystems• Workshop2:Designingabiologicalwwtp
day 4 Biological nutrient Removal for industrial Wastewaters• PrinciplesofBNR• BNRprocessconfigurations• Workshop 3: BnR process synthesis for industrial wastewaters• Plantvisit2
day 5 Tertiary Treatment and industrial Water Reuse• Tertiarytreatmenttechnologies• Industrialwaterreuse• Managingby-productstreams(e.g.ROconcentrate)• State-of-the-artwaterreusetechnologyandpractice• Workshop4:Designingwaterreuseprocesses
whaT do you geT ? • Accesstoworldleadingpractitioners• Understandingofbestpractice• Coreskillsandtoolstoanalyseandtrouble-shootyour
industrial wastewater problems• Twohalf-dayplantvisits
l l l Wed 22 l Thurs 23 l Fri 24 l
3
Issues addressed day 1 • Characteristicsofdecentralisedwastewater• Massbalanceprinciples(nutrients,water,salinity)• Overviewofdecentralisedsystemstechnologies• Regulationsthatgoverntheapproval,managementand
inspection protocols of wastewater systems• Soils–whataretheirimportantcharacteristicsforonsite
effluentdisposalandhowshouldtheybemeasured• Septictrenchabsorptionsystems
day 2 • Greywater• Urineseparatingtoilets• Disinfectionoftreatedeffluent• Applicationofwastewatersystemsatabuildingto
neighbour scale • Integrationoftreatmenttechnologies
(e.g.septictank+pumpedsewer+ionexchange)
day 3 • Managementofdecentralisedsystems• Sustainabilityofdecentralisedsystemsatacatchmentscale• Auditingon-sitesystems• Methodstoestimaterisksofoff-siteexport• Workshop-Sustainableeffluentloadingrates
whaT do you geT ? • AccesstoseveralleadingAustralianpractitionersin
decentralised wastewater treatment systems• Anexcellentintroductiontodecentralisedwastewater
treatment principles, technology and the associated regulations
• Core skills and tools to take back to your workplace which will enable you to specify, evaluate and audit decentralised wastewater systems
• Coursenotesandresourcematerial• Detailed workshop problem sessions based on real case
study material
Presenters: Ted Gardner, Cara Beal, Ben Kele, Simon Toze and Joe Whitehead
Decentralised Wastewater Treatment
who should aTTend?
This course is designed for water industry professionals, engineers, urban planners, environmental consultants and regulators who are involved with the design, installation, operation, appraisal or regulation of decentralised systems.
Learn about the characteristics of decentralised wastewater, and the importance of mass balance of nutrients, water and salinity. Types of decentralised technologies will be discussed in detail, and illustrated with case studies. Other important aspects that will be covered include national and state based guidelines and regulations, disinfection of effluent for various safe end uses, and the environmentally sustainable release of effluent at a catchment scale.The course will be taught by leading industry professionals engaged in the design, assessment and construction of decentralised wastewater systems.
Go to www.iwes.com.au for the extended course outline
Issues addressed day 1 • Ashorthistoryofponds• Whyuseponds?• Differenttypesofpondsystems• TheWorldBanksewagetreatmentselectionby
economics• Thefunctionofdifferentpondsinsewagetreatment• Overviewofnewponddesignguidelines• Workshop1:Pondandconventionaltreatment
combinations
day 2 • Processdesignbytemperaturedependentequations• Pondhydraulicdesignparametersincluding
thermistors• Algaeremovalbytertiarytreatment• Ponddesignguidelines• SiteVisitanddebrief
day 3 • Pondoperation• Pondmonitoring• Commissioning,desludgingandmaintenanceneeds• Upgradingexistingpondstomeettightdischarge
standards• Workshop2:Pondprocessdesigns
whaT do you geT ? • ACDoftheWasteStabilisationPondDesignManual
(2010),developedbyJohnAshworthforthePWC(NT).ThiswillincludeanExcelprocessspreadsheetand engineering drawings
• Casestudiesingreenfieldponddesign• Casestudiesforupgradinganexistingpondscheme• Casestudiesofpondfailure–lessonslearned• Coursenotes,andaccesstoaleadinginternational
practitioner
l Mon 20 l Tues 21 l Wed 22 l l l
who should aTTend?
engineers and scientists who need to learn about the next generation of pond design and operation. Project managers who need sufficient knowledge to assess consultants recommendations.
Pond Design: The next Generation
Presenters: John Ashworth
4
This course moves pond design principles to a new generation, from simple volumetric sizing, to designs incorporating temperature process equations, non-smelly anaerobic ponds of one day retention, hydraulic design and algae removal in the final effluent. Recent work has shown that ponds are capable of producing a 5:10:5, BOD:SS:NH3 mg/L effluent whilst achieving less than 100 Escherichia coli per 100ml. Learn how to exploit this knowledge for your pond systems. This is a practical course, and participants will undertake design calculations, and work on real pond case studies for both municipal and industrial wastewaters.
Go to www.iwes.com.au for the extended course outline
l Mon 20 l Tues 21 l Wed 22 l l l
5Issues addressed day 1 • OverviewoftheAustralianDrinkingWater
Quality guidelines• Emergingwaterqualityissues• Effectivewaterqualitymanagement,including
case studies• Disinfectionprocessesandtheiradvantagesand
disadvantages• Conventionalwatertreatmenttechnology• Variationstoconventionaltreatment• Casestudiesfromoperatingfullscaleplants• Introductiontomembranetechnology• WaterTreatmentExerciseI
day 2 • Causesandtreatmentofissuesrelatedto
cyanobacteria • Treatmentoptionsfortasteandodour
compounds and algal toxins• WaterTreatmentplantvisit
day 3 • Problemsrelatingtoinorganiccontaminants• Oxidationandphysicalprocessesforremovalof
arsenic, iron and manganese• Impactofnaturalorganicmatter(NOM)
and new approaches to characterise it• RemovalofNOM-optimisingcoagulationand
alternative treatments• Overviewofdesalination,includingacasestudy• WaterTreatmentExerciseII
whaT do you geT ? • Accesstoworldleadingexperts• Advicewithlocalissues• CDwiththecourseresourcesandpresentations• Relevantpublicationsandwebsitestoseek
further information • Half-dayplantvisit
Presenters: Mary Drikas and Gayle Newcombe
Drinking Water Treatment: Principles, Practice and Applications
who should aTTend?
The course is designed specifically for engineers, plant operators, scientists, consultants and researchers who do not have a strong background in water qualityissuesorwatertreatmentprocesses. it aims to provide an understanding of the issues facing the potable water industry to assist in providingabetterwaterqualityoutcome.
The aims of this course are to identify key water quality issues, describe the major water treatment processes currently used, and to outline new approaches for optimising water treatment. This is a practical course, and case studies are used extensively in teaching. The course concludes with an interactive design workshop to consider the issues and required treatment for a theoretical water source and water quality.
Go to www.iwes.com.au for the extended course outline
who should aTTend?
Anyone who wants to know how to design and operate membrane plants for water and wastewater treatment, water recycling and desalination. Participants are encouraged to bring a laptop computer. Participants will receive copies of design software for reverse osmosis and antiscalant chemicals.
Membrane Plant Design and Operation
Presenters: Greg Leslie and Troy Walker
6
A comprehensive 5 day course on membrane plant design and operation, taught by two leading Australian membrane practitioners.
Participants will work through design problems for water treatment, water recycling and membrane bioreactor applications, review operational data from membrane plants, learn how to identify membrane fouling and integrity problems, and participate in hands-on autopsies of failed membrane modules.
Go to www.iwes.com.au for the extended course outline
Issues addressed
day 1 Membrane hardware and drinking water applications• Detaileddescriptionofmembraneequipmentand
systems• Hands-ondissectionofmembranemodules• Overviewofkeywaterqualityparametersand
water chemistry issues• TheeffectofsuspendedsolidsandNOM• Designproblem1:Drinkingwaterapplication
day 2 Detailedwaterqualityanalysisandprinciples of Ro system design• Interpretingwaterqualitydata-achievingproduct
waterqualitytargetsandidentifyingdesignlimitations
• TheinfluenceofsparinglysolublesaltsonROsystems
• Usingandunderstandingthelimitationsofmembrane design software for desalination and water recycling applications
• Productwaterandpost-treatmentconditioning• Designproblem2:Waterrecyclingapplication
day 3 operational issues: Managing performance data and integrity• Developingmonitoringandcontrolsystemsfor
membrane plants• Membraneintegritymonitoringandproductwater
qualityissues• Sitevisittoanindustrialwaterrecyclingplant
day 4 operational issues: Fouling, cleaning and cost estimating• Foulingandmembraneautopsyworkshop• Techniquesforidentifyingmembranefouling• Optimisingcleaningandfoulingcontrolstrategies• Hands-onmembraneautopsyexercise• Workshop:Trouble-shootingmembraneoperating
problems
day 5 Special applications: MembraneBioreactors&decentralisedsystems• HowdoMembraneBioreactors(MBR)compare
with conventional wastewater treatment plants ?• KeydesignvariablesforMBRs• DesignofancillaryfacilitiesforMBRs,suchas
head-works, aeration systems, solids handling and chemical storage facilities
• Designproblem3:Membranebioreactor
l Mon 20 l Tues 21 l Wed 22 l Thurs 23 l Fri 24 l
7Issues addressed day 1 • HistoryofwatersupplyandoriginoftheFramework• Overviewofwaterqualityriskassessment
management frameworks• OverviewofADWGFrameworkandrelatedrequirements• Formalrequirementsandstandardofdutynoting
regulatoryrequirements[e.g.WaterSupply(SafetyandReliability)Act2008(Qld);SafeDrinkingWaterAct2003(Vic);OperatingLicencesandBest-PracticeManagement of Water Supply and Sewerage Guidelines2007(NSW)]
• Stakeholdersandriskassessmentteam• Systemdescriptionandsystemflowdiagrams• Waterqualitydataanalysisandpresentation• Methodologiesfordrinkingwaterhazardanalysisand
risk assessment• Identifyinghazards,assessingrisksandsetting
management priorities
day 2 • Identifyingcriticalcontrolpointsandkeycontrol
programs• Developing specifications for proportional control of risks• Managementofincidentsandemergencies• Technicalvalidationofsystemcapability• Verificationofsystemperformance• Supportingprogramsunderpinningtherisk
management system
whaT do you geT ? • PracticalunderstandingoftheADWGFramework• Accesstoexperiencedwaterqualitymanagement
system facilitators• CoursenotesandCDsummarisingkeypointsfromthe
Framework• Exercisesandproforma’stoassistwithFramework
implementation• Peercontactsworkinginwaterqualitymanagement
Presenters: Daniel Deere and Arran Canning
Australian Drinking Water Guidelines Practical implementation of the ADWG Framework
who should aTTend?
• Individualswantingapracticalunderstanding of the Framework
• ProfessionalsusingtheFramework in operational, regulatory or service provision roles
The aim of this course is to provide practical training in implementing the NHMRC/NRMMC Australian Drinking Water Guidelines (ADWG) Framework for the management of drinking water quality.
This is a practical course, structured around a series of sessions that illustrate each of the principles and concepts of the Framework using illustrative examples. Each of the short lectures is followed by small group exercises, and opportunities for participants to apply the concepts to their own situations. A case study of the implementation of the Framework will be given using local examples.
Go to www.iwes.com.au for the extended course outline
l l l l Thurs 23 l Fri 24 l
who should aTTend?
This course is designed to enhance the knowledge and skills of people responsible for commissioning, interpreting and responding to chemical water qualitymonitoringdata.Itisrelevant for people working in catchment management, drinking waterquality,wastewatercharacterisation, environmental waterqualityandriskassessment.
Presenter: Stuart Khan
8
This new course has been designed to provide the practical skills necessary to commission, manage, interpret and respond to chemical water quality monitoring data.The issues of chemical contaminants in water have rapidly escalated in importance and profile throughout the last decade. Chemicals including pesticides, dioxins, hormones, pharmaceuticals, cyanobacterial toxins and disinfection by-products have been associated with diverse environmental and public health concerns in drinking water, wastewater and environmental waters. Accordingly, it is increasingly important for water quality practitioners to possess the knowledge and skills to enable them to identify key issues associated with chemical contaminants, design monitoring programs, collect valid samples, select suitable laboratories for analysis and interpret chemical analytical data.
Go to www.iwes.com.au for the extended course outline
Issues addressed
day 1 understanding the issues • Whattypesofenvironmentalandhumanhealthrisksdo
trace chemicals pose?• Whatevidenceistherefortheserisks?• Howare‘safe’concentrationsandexposurelevels
determined?• Australianwaterqualityguidelinesandsafelevelsof
exposure• Analyticalmethodsforextractionanddetection–
knowingwhattorequest• Understandingbasicprinciplesofadvancedanalytical
methods • Learntospeakthelanguageofananalyticalchemist!
day 2 Practicalskillsforchemicalwaterqualitymonitoring • Samplingtechniquetoensuremeaningfulrepresentative
sample collection• Statisticalrequirementsandminimumsamplenumbers• Samplepreservationtechniques• Selectingandassessinglaboratoriestoundertakeyour
analysis• Understandinglaboratorytechniquestoensuringaccurate
quantitationandqualitycontrol• Interpretingchemicalmonitoringdata• Statisticalanalysisandreporting• Respondingtomediaquestionsandissues
whaT do you geT? • Practicalskillstodesign,manageandinterpretchemical
waterqualitymonitoringprograms•Accesstoanationalexpertinchemicalwaterquality
monitoring•SeveralAustraliancasestudiesandbenchmarkingdata
l Mon 20 l Tues 21 l l l l
Chemical Contaminants in Water Significance, Monitoring and interpretation
9
Issues addressed day 1 • OverviewofAustralianandInternational
guidelines for recycled water• Keyprinciples,conceptsanddefinitionsusedin
the new AGWR• Theapproachusedtoderivethemicrobial
health-based targets• Estimatingthelevelofriskandestablishingthe
appropriatelogreductionrequirements• Designofchallengetestsforvalidationand
verification studies• Workshop1
day 2 • Selectingtreatmentprocessesforremovalof
suspended solids, pathogens, organics and salts in municipal and industrial applications
• UsingHACCPprinciplestoestablishcontroland monitoring protocols for water recycling schemes
• ThemanagementofchemicalrisksintheAGWR• Advancedanalyticaltechniquesfortrace
organics analysis• Assessmentofon-linewaterqualityanalysis
techniques• Sitevisittoanindustrialwaterrecyclingscheme
day 3 • Derivingtheenvironmentaltargets,keyhazards
and trigger values• Industrialwaterrecyclingcasestudiesfrom
agriculture, horticulture, dairy, food and beverage, pulp and paper manufacture
• Municipalwaterrecyclingcasestudiesinvolvingrecycling for groundwater recharge and wetlands
• Indirectpotablereuse:treatmentprocesses,regulations, health effects, cost and public perception
• Workshop2
whaT do you geT ? • Practicalskillstodesign,optimiseandevaluate
water recycling projects• Access to world leading experts in water recycling• CDwithcoursenotes• SeveralAustraliancasestudiesand
benchmarking data• Sitevisit
Presenters: Greg Leslie, Daniel Deere, Heather Chapman, Daryl Stevens and Stuart Khan
who should aTTend? The course is designed for water industry professionals working with recycling projects in industrial and municipal applications that need to know the latest informationandtrendsinwaterqualityanalysis, chemical and microbial risk assessment, centralised and decentralised treatment options and on-line water qualitymonitoring.
Water recycling has become an important component of industrial and municipal water management in Australia. This course will provide a comprehensive introduction to the key issues associated with water recycling. You will learn the underlying principles and logic behind the Australian Guidelines for Water Recycling (AGWR), how the AGWR can be applied, how to identify opportunities to improve the efficiency of water recycling operations, how to rationalise sampling and water quality analyses and how to assess chemical and microbial risks. It will also identify the state-of-the-art in water recycling technology and practice in Australia and overseas.
Go to www.iwes.com.au for the extended course outline
Water Recycling: Design, Assessment and optimisation
l l l Wed 22 l Thurs 23 l Fri 24 l
who should aTTend?
The workshop is designed specifically for engineers, field operators, scientists, consultantsandresearcherswhorequireastronggroundinginCSGwaterqualityissues and water treatment processes
Presenters: Andrew King, Konstantinos Athanasiadis, Greg Leslie, Paul Smith
10
The rapid upstream development currently underway to support CSG projects involves a significant effort on associated water management, including both treatment and beneficial use plans. This comprehensive course provides an overview of the wide range of specialties involved in the management of coal seam gas associated water. You will learn about the full CSG water cycle, and how to achieve better overall water outcomes to support the growth of this critical Australian industry.
The presenters are some of Australia’s leading CSG water practitioners and designers, and the course is structured around real-life challenges and solutions encountered in some of Australia’s largest and most demanding CSG water management projects.
Go to www.iwes.com.au for the extended course outline
Issues addressed
day 1 • IndustryoverviewincludingCSGinAustralia
and global activities• Thenaturalenvironment-surfacewaterand
hydrogeology• Fielddevelopment• Hydrogeology• Fieldinfrastructuredesign(gatheringsystem)• DesignExercise1:Watercurveestimation
and field infrastructure design
day 2 • Theregulatoryandsocialenvironments• WaterQuality:Keywaterqualityparameters
for plant design• Treatment:Systemconfigurations;RO
membranedesalination;Chemicalandphysical treatment technologies
• DesignExercise2:DesignaCSGwatertreatment facility
day 3 • Overviewofbeneficialreuseoptionsandkey
drivers• Dams-Regulation,designprinciplesand
operational challenges• Overviewofbrinemanagement• Casestudiesfromoperatingfullscaleplants• DesignExercise3:Designabeneficialreuse
scheme
whaT do you geT ? • AccesstoleadingCSGwaterprocessexperts• Coursenotesandresourcematerial• Workshopsessionsbasedonrealcasestudy
material • Analysisanddesignskillstotakebacktoyour
workplace • Designexercisesandreal-worldcasestudies
Coal Seam Gas Water Management
l Mon 20 l Tues 21 l Wed 22 l l l
11
Issues addressed day 1 • Climatechangescienceandits
relationship to the water sector • Climatechangepolicy:NGERS;Clean
energy Future• Workshop:Developingaclimate
changeriskassessment&responsestrategy
• CalculatingGHGandenergyinventories
day 2• FugitiveGHGemissions(CH4 and n2O)
from wastewater systems • Workshop:CalculatingaGHG
and energy inventory for a water organisation
• StrategiesforreducingGHGemissionsin the water industry
• “Carbonneutrality”andgeneratingaccredited offsets
day 3 • Climatechangemitigationand
relationship to adaptation • Climatechangeimpactsandrisk
assessment • Developingabusinesscaseforaction• Workshop:Creatingacredibleclimate
change abatement and adaptation plan
whaT do you geT ? • Accesstotwoleadingpractitionersin
the field of climate change risk in the water industry
• Toolsandplanstodirectlyapplyinyourworkplace
• CoursenotesandCD-ROM• DetailedAustraliancasestudiesand
“hands-on”workshops
Presenters: Jeff Foley and Chris Lund
who should aTTend?
Anywatersectorprofessionalthatrequiresan understanding of climate change risk and greenhouse gas emissions assessment and reduction in the water industry. This includes:• ClimateChange/ProtectionOfficers• Managersresponsibleforgreenhousegas
emissions• Governmentenforcementagencies• Engineersandtechnicalmanagers• Systemdesigners
The aim of this course is to provide water industry practitioners with the skills and knowledge to:1. Understand the risks posed by climate
change to their organization2. Calculate and reduce their greenhouse gas
footprint3. Assess and develop strategies for reducing
their exposure to physical climate change risk.
The course will also assist participants to better understand the adaptation risks their organisation face due to climate change; help them to take the first steps in developing a climate change adaptation plan; and will identify tools that will support them in implementing their plan. This is a practical course with real-world Australian case studies and “hands-on” workshops.
Go to www.iwes.com.au for the extended course outline
Managing Climate Change Risk in the Water Industry Accounting,Accountability,Abatement&Adaptation
l l l Wed 22 l Thurs 23 l Fri 24 l
who should aTTend?
The course is specifically designed for anyone who is dealing with issues related to contaminated land or ground water. The course will provide insight and understanding to assist people to work with environmental consultants or local councils, and will be invaluable for environmental scientists, engineers, consultants, town planners or developers wishing to enhance their knowledge of contamination issues and processes.
Presenters: Paul Durrant, Paul Smith and Herb Williams
12
The aim of this course is to provide an overview of the required processes for managing contaminated or potentially contaminated sites. The course explains what steps need to be taken when you encounter soil or water contamination, what options are available, and the regulatory requirements that need to be satisfied.
Participants will also gain an understanding of the protocols and processes undertaken in order to investigate and remediate soil and ground water contaminated sites.
Go to www.iwes.com.au for the extended course outline
Issues addressed
day 1 What do you do when a site might be contaminated ?• Howtodetermineifthesiteisknownor
suspected of being contaminated• Guidelinesandinvestigationthresholds• EnvironmentalSiteAssessment(ESA)• RegulatoryConsiderations• Workshop1:Contaminatedsiteassessment
day 2 Tools for Site investigations• Contaminationinsoil:Overviewofsoilscience;
Soilsamplingandanalysis;Interpretingresults;Techniquesforremediation
• Contaminationinwater:Overviewofgroundwater(hydrogeology)andsurfacewater(hydrology);Watersamplingandanalysis;Interpretingresults;Techniquesforremediation
• DeterminingwhethertoimplementaSMP,RAPor remediate
• Workshop2:Contaminatedsiteanalysis
day 3 Sitevisit&siteremediationcasestudies• Assistinanenvironmentalsiteassessment• Sitevisitdebrief• Contaminationissuesrelatedtovariousindustries• Chainofcustodyandanalytesofconcern• Workshop3:Siteremediation
whaT do you geT ? • Accesstoleadingpractitionersincontaminated
land&hydrogeology• Anunderstandingofthefundamentalsteps
requiredtoinvestigate,remediateandvalidatecontaminated sites
• Agoodintroductiontotherelevantguidelines,investigation thresholds and regulatory requirementsforcontaminatedland
• CoursenotesonCD• Avisittoparticipateinarealsiteassessment
Contaminated Site Assessment and Remediation
l Mon 20 l Tues 21 l Wed 22 l l l
13
Issues addressed
day 1 • Introduction-casestudiesand
regulatoryrequirements• Understandingasitehydraulicsystem• Meterreading,descriptionofthe
different meter types and features• Analysingbillingdataandcurrent
usage to establish a baseline• Monitoringwateruseusingdata-
loggingequipmentandremotedataanalysis
• Measuringflowratesofarangeofwater using fixtures
• Workshop
day 2 • Sitevisitincludingwateraudit• Preparingawaterbalance• Commonfixtureandequipment
improvement measures• Calculatingcosts,savingsandpayback
periods• Industrybestpracticebenchmarks
whaT do you geT ? • Skillstoperformyourownrigorous
water audit• AccesstorealAustraliancasestudies• CoursenotesandCD-ROM• AccesstoaleadingAustralian
practitioner in water auditing• Hands-ontraining
Presenters: Reid Butler and Adam Jones
who should aTTend?
• Any industrial users of potable water • Council and water utilities staff wanting to
improve the water efficiency of their properties• Consultants wishing to conduct water audits for
clients• Facilities and property managers aiming to
get a better understanding of applying water efficiency to their sites
• Anyone needing to comply with government regulations to prepare water management plans
Learn how to perform a rigorous water audit. This is a practical course which will teach you how to prepare hydraulic diagrams for a site, calculate usage and baseflows, prepare a site water balance and calculate savings and payback periods for a range of water efficiency options.
By fully understanding the hydraulic system in a facility, steps can be taken to improve the process and then supply fit-for-use water where required in a cost effective way. Auditing is an important first step in achieving water efficiency.
Governments in most states are requiring large water users to conduct audits of their properties and this course will enable the practitioner to conduct an audit according to these requirements.
Go to www.iwes.com.au for the extended course outline
Essentials of Water Auditing
l l l l Thurs 23 l Fri 24 l
and is an invited reviewer for several leading international scientific journals. He was recently awarded the Lord Mayor’s Leaders of innovation 2010 Award for demonstrating a high degree of leadership in Product innovation contributing towards the long term economic growth of Brisbane.
The Presenters
14
Konstantinos athanasiadis
Konstantinos leads the Brisbane office industrial Water and Waste at GHD. He has 15 years professional experience as an engineer with a particular emphasis on industrial water and wastewater management. This covers option studies, troubleshooting, pilot plants, concept and detailed design, specification, tendering, installation and commissioning. Konstantinos has an international reputation
damien Batstone
Dr Damien Batstone is an Associate Professor at the Advanced Water Management Centre, The university of Queensland. Previously, he was an Associate Professor in environment and Resources, Technical university of Denmark. He has a very strong international presence for his work in a wide range of areas, including industrial wastewater treatment, biofuel
John ashworth
John is a civil engineer with almost 40 years specialisation in water and sanitation across the globe. He developed a passion for waste stabilisation ponds in the 1970s whilst on a construction project in the Saudi desert. This has extended to a large number of projects involving pond design, construction and trouble-shooting in a variety of places. Recently, John has advised on many pond projects across Australia. This included the development of the Pond Design Manual for the nT PWC, with Professor Duncan Mara (UK),theworldsleadingpondexpert.Themanualreflectstheproblemsandbenefits
of the Australian climate, and provides pond designs for the 21st century. in addition to his vast array of work on waste stabilisation ponds, John has spent a lot of his career working in developing countries, on water, sewage, hygiene and emergency programmes. He was recently the project manager for the Rural Hygiene and Sanitation Project in Kyrgyzstan, seconded to the unHCR in Pakistan to develop camps for Afghan refugees, and seconded to uniCeF on hygiene promotion for the South Asia earthquake.
production, process optimisation and control, modelling of anaerobic digestion, biosolids treatment and removal of organic pollutants. Damien is an experienced teacher, and he has also consulted extensively in europe and Australia.
reid Butler
Reid is the Manager of the BMT WBM Water and environment office in Sydney and has over fifteen years experience in sustainable water management. For the past seven years he has been conducting water audits and has achieved significant water savings through improved efficiency and innovative water reuse ideas for government, commercial and industrial clients.
Reid has been one of the key developers of water auditing and monitoring methodology and regular service provider to Sydney Water’s every Drop Counts Business Program. He is active in promoting water auditing as an effective means to save water and money in high water use industries.
frameworks in South east Queensland. Previously, Arran worked for Gold Coast Water as the Coordinator of Product Quality, where he was responsible for the risk management systems, including HACCP, for a catchment to tap water supply, recycled water systems, wastewater systems and trade waste management.
15
arran Canning
Arran is the Water Quality Product Manager for Seqwater,responsiblefortheoveralldrinkingwaterqualitymanagementfortheorganisationwhich includes 47 water treatment plants. A part of this role includes the implementation of the Australian Drinking Water Guidelines (2004)forthewholesysteminthecontextoftheWaterSupply(SafetyandReliability)Act2008(Qld).Hehasextensiveexperienceinthepractical implementation of risk management
heather Chapman
Dr Heather Chapman has been involved with urban water research and management for the last 12 years with significant experience in water recyclingR&D.SheisanAssociateProfessorandProgram Leader for the Health and environment Program in the Smart Water Research Facility located at Griffith university in Brisbane. From 2003–2008shewastheprogramleaderforthe Sustainable Water Sources program in the
Cara Beal
Cara Beal is a Research Fellow at the Smart Water Centre, Griffith university where she manages research into urban water end use analysis. Prior to this appointment Cara worked in Qld DeRM on various aspects of sustainable urban and decentralised water management including the development of a pilot project
for urine separation toilets at the Currumbin ecovillage. This followed on from her PhD work on the hydrogeochemistry of septic absorption trenches, on which she became an acknowledged world expert.
CRC Water Quality and Treatment. She was a member of the working group who developed the Australian Guidelines for Water Recycling, Phase 1 and contributed significantly to the supporting work behind the Phase 2 guidelines, Augmentation ofDrinkingWaterSupplies(EPHC/NRW/NWC,2008).
daniel deere
DanDeereisawaterqualityscientistwith Water Futures Pty Ltd, specialising in quantitativeandwatercycleriskassessmentand risk management planning. He also works part - time for the CRC for Water Quality and Treatment as the Catchments Research Program Leader. He has worked in scientific roles in the uK, Sydney and Melbourne as an academic research fellow and consultant, specialising in microbial waterqualitymonitoringandprocessvalidation. More recently, he has worked in technical management roles in water utilities
in Melbourne and Sydney.
Dan has provided training in the ADWG Framework,WaterSafetyPlans(WHO),theAustralian Guidelines for Water Recycling Framework and Hazard Analysis and Critical ControlPoints(HACCP)acrossAustralia,Asiaand in europe. He holds Lead Auditor status and is an Auditor Skill examiner under the RABQSA Drinking Water Quality Management System(DWQMS)certificationscheme.
The Presenters
consist of civil developers, utility suppliers, town planners and land owners through to local and federal government. Paul came to WSA from his own successful environmental consulting firm. using his diverse background, Paul endeavours to implement environmental services to clients based on his personal understanding of business needs and commercial pressures.
16
Paul durrant
Paul Durrant is Manager environmental Services at Waste Solutions Australia Pty Ltd. Paul is an engineer and has spent the last 16 years working with large corporate organisations world wide.
Paul’s interest lies in contaminated land, where he has worked on projects specialising in contaminated land management, providing contaminated land assessments and consulting on contaminated land remediation and site management plans. His regular clients
Jeff Foley
Jeff is a principal process engineer, with over ten years’ experience in the areas of wastewater treatment, odour control, life cycle assessment and greenhouse gas emissions. He is the Manager of the GHD Western Australian Water and Wastewater Services Group. He holds a PhD from the AdvancedWaterManagementCentre(UQ)on the Life Cycle Assessment of Wastewater Treatment Systems, with a special focus on fugitive methane and nitrous oxide greenhouse gas emissions.
Mary drikas
Mary Drikas has been the Principal Research Chemist of the Water Treatment unit in the AustralianWaterQualityCentre(AWQC)since 1987. She was appointed Program Coordinator of the Water Technology Program within the Cooperative Research Centre for Water Quality and Treatment (CRCWQT)whichwasformallyestablishedinJuly 1995, with responsibility for managing water treatment projects nationally.
in her role at the AWQC, Mary leads one ofthemostinfluentialandrespectedwater
treatment research groups in Australia. She has over 25 years experience in water treatment and has personally led projects researching a variety of processes. She has also been involved in the development of innovative processes such as biological activated carbon using ozonation and uV irradiation, methods for determining assimilable organic carbon and is a co-patentor of the magnetic anion exchange resin(MIEX®)fortheremovalofnatural organic matter.
For the past four years, Jeff has acted as the technical advisor to the Water Services Association of Australia, in their negotiations with the Department of Climate Change on industry concerns regarding measurement and liability issues under the national Greenhouse andEnergyReportingSystem(NGERS). He is also the principal author of the recently released national Greenhouse and energy Reporting System: Guidelines for the Water Industry(WSAA,May2011).
The Presenters
The university of Queensland conducting research into biochemical processes and crystallisation technologies including struvite. Mike continues to provide technical advice for theenvironmentalR&DprogramforAustralianredmeatprocessorsundercontracttoMeat&Livestock Australia.
Mike has been a regular lecturer at iWeS courses, and he is regarded as an engaging and inspirational speaker.
17
Mike Johns
Mike is the Director of Johns environmental –aspecialistenvironmentalconsultingcompany focussed on industrial wastewater treatment and recycling issues. He has 25 years experience consulting on water and wastewater issues of concern to Australia and new Zealand. His speciality is providing innovative process design and troubleshooting for wastewater plants discharging to rivers, landandsewerandqualityreuse.
Mike worked for 15 years at the Department of Chemical engineering,
adam Jones
Adam is an environmental engineer in the BMT WBM Water and environment Group office in Sydney. He has been involved in more than 100 individual site water audits in Sydney andthroughoutNewSouthWales–manyof these with the ‘Water Savings Section’ of the nSW Department of Commerce and Sydney Water’s ‘every Drop Counts’ Business Program. His skills range from hydraulic system analysistoflowmonitoringanddetailedflowdata analysis. He has extensive experience in
auditing industrial plants, hospitals, shopping centres, office buildings, universities, TAFe’s, entertainment facilities, stadiums, hotels, swimming pools, parks and a range of other uniquesites–andhehasmanagedtoachieveaverage savings of more than 40% of potable water use. He has also been involved in training Council, TAFe and university staff in water efficient management of sites under their control.
Ben Kele
Ben Kele is the Principal of Midell Water, a consultancy company that specialises in thedesign&operationofdecentralisedwater&wastewatertechnologiesatclusterscale or larger, particularly those located in environmentally sensitive environments. Midell Waterrecentlydesigned&constructedthe
sewage treatment facility at the Woodford Folk Festivalwhichsuccessfullytreatstheeffluentfrom 150,000eP over a 6 day period. Ben is completing his PhD thesis on the use of zeolites for wastewater treatment, and also lectures part time for Central Queensland university.
The Presenters
Ted gardner
Ted Gardner is a part-time Senior Research Fellow at Central Queensland university where he works on a broad range of water issues. He recently retired as a Principal Scientist fromDERM(Qld.DepartmentEnvironment&ResourceManagement)andCSIROwherehe led research into the urban water cycle,
focusing especially on alternative water sources. He has published extensively in the areaofdecentralisedwater&wastewater systems. Ted was awarded the Australia Day Public Service Medal in 2005 for his work on urban water recycling.
techniquesforthequantitativeassessmentof chemical risks in water recycling schemes. He is also a member of the Water Quality Advisory Committee appointed by the national Health and Medical Research Council to advise on issues including indirect potable water recycling.
18
stuart Khan
Stuart Khan is a Senior Research Fellow at the unSW Water Research Centre where he leads the research stream on trace organic contaminants in water. Much of his recent research has been focused on the presence and fate of trace chemical contaminants in wastewater and recycled water systems. Stuart currently holds a Fellowship from the national Water Commission to investigate
andrew King
Andrew has twenty five years of engineering experience, primarily in the oil and gas and wastewater sectors. He has worked in industry, governmentandasaconsultant–whereheiscurrently a director of the consulting company eeCo. During the last ten years he has worked with origin and has been intimately involved with the development of their Coal Seam Gas
Jurg Keller
Jurg is the Director of the Advanced Water Management Centre and Professor in Chemical engineering at The university of Queensland. He has a strong international reputation in environmental biotechnology and wastewater process engineering with particular emphasis on biological nutrient removal and novel process technologies. He has made valuable contributions in process
design and optimisation in wastewater treatment processes for optimal nutrient removal and energy recovery, most recently focussed on nitrogen removal processes and microbial fuel cells.
Jurg has consulted widely in the Australian water industry and has taught iWeS courses for many years.
fields and the management of associated water.
HisformalqualificationsincludeaBE(Chem),MEngSc(Env)andaPhD(Chem).He is a member of engineer’s Australia and the immediate past chair of the Queensland Chapter of the Society for Sustainability and environmental engineering.
Paul lant
Paul is Professor and Head of the School of Chemical engineering at The university of Queensland. He has an international reputation for his research in biological wastewater treatment. His formal qualificationsincludeaMEngandPhDfromNewcastleUniversity(UK)andanMBAfromThe university of Queensland.
He was a co-founder of the Advanced Water Management Centre, which is widely
acknowledgedastheleadingR&Dgroupinbiological wastewater treatment in Australia. He is also a Director of Wastewater Futures Pty Ltd, a wastewater technology company which specialises in wastewater treatment solutions for industrial applications. Paul is an experienced lecturer and he has been the recipient of national teaching awards. Paul is the Director of iWeS.
The Presenters
experience in eco-efficiency and triple bottom line corporate sustainability.
Chris is also a research leader in the Centre for Sustainable Resources Processing and an adjunct Associate Professor in the Centre of excellence in Cleaner Production at Curtin university of Technology.19
Chris lund
Dr Chris Lund is Principal and Director of Climate Change Response. until recently he was Principal Sustainability Consultant with GHD where he coordinated the company wide climate change and greenhouse gas management services. He has 20 years multidisciplinary experience in the areas of sustainable energy and greenhouse gas management including teaching, research and consulting. More recently he has
gayle newcombe
Gayle newcombe is the Research Leader of the Applied Chemistry unit of the Australian Water Quality Centre and holds an Adjunct Associate Professor position at the university of South Australia. Dr. newcombe completed tworesearchdegrees(M.App.Sci.,PhD)inthe area of surface chemistry. Her PhD thesis described surface chemistry involved in the adsorption of natural organic material onto activated carbon.
greg leslie
Greg Leslie is an Associate Professor of Chemical engineering at The university of new South Wales. Greg was previously the Membrane Technology and Water Reuse Leader for CH2M Hill in the Asia Pacific Region. Recent CH2M Hill experience includes process design lead for two dual membrane reclamation plants for the Singapore Public utilities Board, project manager for stormwater reuse project at Singapore Changi Airport and project manager for an international survey of membrane bioreactors for the South Australian Water Corporation.
Prior to joining CH2M Hill he was employed with the orange County Water District in Fountain Valley, California as a Sr. engineer working on the Groundwater Water Replenishment System, a uS$350M indirect potable water reuse project. His involvement in this water reuse project spanned six years and included project planning, pilot and demonstration plant studies, environmental review process, health risk assessment and preliminary design studies.
Gayle has worked in the drinking water industry for 18 years, leading, research projects investigating activated carbon treatment and ozonation of taste and odour compounds, noM and algal toxins. She is the author or co-author of over one hundred publications on different aspects of drinking water treatment.
steven Pratt
Steven is a Lecturer in Chemical engineering at The university of Queensland. He is a chemical engineer with a PhD in wastewater engineering, and has expertise in industrial wastewater treatment and environmental biotechnology. Prior to working at uQ, Steven worked as a Lecturer at Massey university, nZ, where he consulted to local government and the dairy industry on sustainable wastewater treatment, focusing on passive wastewater
treatment systems and energy recovery from domestic and agricultural wastes.
Steven is driving a variety of exciting research projects, including producing algal biodiesel and biodegradable polymers fromindustrialeffluents.Heisa co-developer of the ToGA Sensor, an innovative high-tech instrument which enables greater insight into biological processes.
The Presenters
His research has won several industry and university awards for excellence, and his expertise in the area of recycled water is recognised nationally and internationally. During his research career, Daryl has contributed significantly to more than 100 scientific papers, conference proceedings, technical reports and books.
20
daryl stevens
Daryl is one of Australia’s leading experts in the use of recycled water in amenity and production horticulture. He is a Principal Scientist with Atura Pty Ltd, and he provides project coordination and scientific services for the environmental Risk Component of the national Guidelines on Water Recycling, and is the national Coordinator for Recycled Water Development in Horticulture. He was also an advisor to the World Health organisation.
simon Toze
Simon Toze is a Research Group Leader with CSiRo Land and Water in the urban and industrial Water Research Theme. He also leads the indirect Potable Recycling research area for the CSiRo Water for a Healthy Country Flagship. He obtained his PhD in Microbiology from The university of Queensland in 1992 and has been working
Paul smith
Paul is Director and Principal Consultant of Waste Solutions Australia Pty Ltd. Paul established WSA in 1988 to provide services in key environmental management disciplines including hydrogeological assessment, waste management and contaminated land remediation. He has worked throughout Australia and South-east Asia in a variety of service sectors.
Paul has over 30 years of experience in
hydrogeology and the assessment of groundwater resources, and is regularly sought as an expert witness. Some current projects include monitoring and assessing the impact of a clients borefield on a sub-basin of the Great Artesian Basin, assessing final void monitoring for a coal mine, and monitoring and reporting annually on the groundwater resources under a hazardous waste treatment facility.
with CSiRo since 1994 on a range of water based topics. His current principal research focus is on the reuse of water in urban environments, in particular involving indirect Potable Reuse and Managed AquiferRecharge.
Troy walker
Troy Walker is the Technical Manager for Veolia WaterAustralia/NewZealand.Priortothis,Troy has worked as the Technical Manager for Veolia Water in Qld which oversaw operations of the Western Corridor Recycled Water and Gold Coast Desalination Plant operations. Troy has worked for the Veolia group of companies for over 12 years and has experience in the
design, commissioning and operation of membrane plants in Australia, new Zealand, the united States and Singapore. Prior to this Troy worked for 5 years with a membrane filtration technology company based in Australia. Troy is an experienced presenter and has taught at iWeS for several years.
The Presenters
development groups and a wide range of smaller commercial, agricultural and industrial clients. Some examples include contamination audits and management protocols on 4 major shopping centres, 6 north Queensland sugarmills,over60quarries,batchingplants,transport depots, bitumen plants, timber treatment plants, sand mining and crusher plants, explosives plants, and heavy metal contamination.
21
herb williams
Herb is the Principal Consultant for AeG environmental, and over the last 18 years he has been the principal consultant for over 400 contaminated land projects covering audits, assessments, preparation of site management plans(SMP’s)andremediationprograms.Heisexperienced in industrial petroleum chemistry, agriculturalandsoilschemistry,waterqualitychemistry and environmental chemistry. Clients have included national and international corporations, government departments, major
Joe whitehead
Joe Whitehead is an environmental and engineering Geologist with over 35 years experience in ground related problems, wastewater and waste management in europe, north America and Australasia. He has wide experience in the design and management of decentralised wastewater systems and has prepared and delivered in excess of
100 professional short courses in on-site and decentralised wastewater management in Australia, new Zealand and the Pacific. JoeisPrincipalofWhitehead&Associatesenvironmental Consultants Pty Ltd, Director of the Centre for environmental Training and an Adjunct Senior Lecturer at the university of newcastle.
The Presenters
WaterAid
iWeS is a corporate member of WaterAid. We are promoting the work of WaterAid to our clients, and there is an opportunity to forward your contact details to WaterAid on the Registration Form.
WaterAid is an international nGo dedicated exclusively to the provision of safe domestic water, sanitation and hygiene education to the world’s poorest people.
WaterAid works by helping local organisations set up low cost, sustainable projects using appropriate technology that can be managed by the community itself.
WaterAid is independent and relies heavily on voluntary support.
WaterAid Australia’s vision is of a world where everyone has access to safe water and effective sanitation.
Registration Form Sydney 2012, February 20 - 24
Cost of registration( inc.GST )
no of days 2 3 4 5Register pre January 13 $1600 $2300 $2800 $3150
Register after January 13 $1750 $2500 $3100 $3450
discounts for organisations registering multiple delegates 2 - 3 delegates = 5% 4 - 5 delegates = 10% 6 and over = 15%
All registrations are attached to confirm this discount as per item 3 in the ‘terms and conditions’
Course no. no. of days
1 Principles of Wastewater Treatment 5 days
2 Trade Waste and industrial Wastewater Treatment 5 days
3 Decentralised Wastewater Treatment 3 days
4 Pond Design: The next Generation 3 days
5 Drinking Water Treatment: Principles, Practice and Applications 3 days
6 Membrane Plant Design and operation 5 days 7 Australian Drinking Water Guidelines 2 days 8 Chemical Contaminants in Water: Significance, Monitoring and interpretation 2 days
9 WaterRecycling:Design,Assessment&Optimisation 3days 10 Coal Seam Gas Water Management 3 days
11 Managing Climate Change Risk in the Water industry 3 days 12 Contaminated Site Assessment and Remediation 3 days
13 essentials of Water Auditing 2 days
22
registration details
First name Dr Mr Mrs Ms Last name
organisation Address
Phone email
Yes I would like to find out more about WaterAid, and authorise IWES to forward my contact details
Payment details
IhaveenclosedachequemadepayabletoUniversityofQueensland
Or, i authorise you to debit my: Visa Mastercard
Or, our Company Purchase order number is: Please forward a Tax Invoice
Cardholders name: Card number:
Amount: expiry date:/Signature
Send completed form to iWeS by fax 07 3550 3150 or post to Po Box 6127 Mitchelton QLD 4053 email: [email protected] uQ ABn: 63 942 912 684 Credit Card payment must be signed by the Cardholder
See over for terms and conditions
TerMs and CondITIons1. Cancellationofregistrationlessthan3weeksbeforethestartingdateofacourse(s)willincuracancellationfee of 50% of the course price. Alternatively, delegates may send a substitute. 2. While every attempt will be made to deliver all advertised courses, iWeS reserves the right to cancel individual courses at short notice. 3. Onlyregistrationssubmittedandinvoicedinonebatchqualifyformultipleregistrationdiscounts.
“This is my third IWES. It gives a great opportunity not only to get the best technology training but to speak to experts in the field. It’s great!”
“it’s been fantastic because it’s been really practical knowledge that’s been shared. It’s great just being here and it’s well organised.”
“I’ve been able to make a few changes already that have improved our effluent quality.”
“This course will pay for itself in about 1 hour on monday !”
“I thought the course was excellent. Both the course content and the professionalism of the presenters were of a high standard. I would definitely be interested in doing more IWES courses.”
“The stuff on the web site was correct...this course did pay for itself on Monday morning...”
“Thanks again for the Principles of Wastewater Treatment course ... it really was great. I had no idea I was so interested in wastewater! “
“Excellent, Well done!”
• ACTEWAGL• AirLiquideAustralia• AquatecMaxcon• AustralianAntarctic
Division• AustralianPaper• BluescopeSteel• BrisbaneCityCouncil• CastlemainePerkinsLtd• CentralHighlandsWater• CH2MHill • CocaColaAmatil• CountryEnergy,NSW• DairyFarmers
• Enviroquip• EPA• ErgonEnergy• FordMotorCompany• GHD• GippslandWater• GladstonePortAuthority• GoldCoastWater• HoldenLtd• HydroTasmania • JamesHardie• Kellogg,Brown&Root• KimberlyClarkAustralia• MasterfoodsAustNZ
organisations which have sent delegates to Iwes include:
• MelbourneWater• NorskeSkog• NSWEPA• SAWater• Shell,ClydeRefinery• SouthWestWater
Authority• SyskillInternational• SunWater• SydneyWater• TarongEnergyCorp• VeoliaWater• WaterCorporationofWA• WoodsideEnergyLtd
What do people say about IWES?
Who will attend?
23
24
The Venue
Citigate sydney
ideally located in the heart of Sydney’s entertainment and theatre district, this leading 41⁄2 star hotel has recently had a multi-million dollar refurbishment on its 251 oversized rooms and 11 conference rooms.
how to book accommodation ?IWESdelegatesqualifyforadiscountedroomrate.Contact Jenny at event Solutions if you would like to book accommodation: Phone: 61 7 3550 3100email: [email protected]
hotel details169 - 179 Thomas St, Sydney, nSW Ph:+61292816888Fax:+61292816688
Courses Mon Tue wed Thu Fri
1 Principles of Wastewater Treatment l l l l l 2 Trade Waste and industrial WWT l l l l l 3 Decentralised Wastewater Treatment l l l 4 Pond Design: The next Generation l l l 5 Drinking Water Treatment l l l 6 Membrane Plant Design &Operation l l l l l 7 Australian Drinking Water Guidelines l l 8 Chemical Contaminants in Water l l 9 Water Recycling l l l10 Coal Seam Gas Water Management l l l11 Managing Climate Change Risk l l l12 Contaminated Site Assessment l l l13 essentials of Water Auditing l l
The Program
Phone 1800 000 404Email [email protected]
www.iwes.com.au